aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2011-02-22 16:57:21 -0800
committerGreg Kroah-Hartman <gregkh@suse.de>2011-02-22 16:57:21 -0800
commit4a6514e6d096716fb7bedf238efaaca877e2a7e8 (patch)
treee3601ee168cca90307ac91e750a86d6ed04eab01 /drivers/char
parent282361a046edd9d58a134f358a3f65a7cb8655d9 (diff)
downloadkernel_samsung_smdk4412-4a6514e6d096716fb7bedf238efaaca877e2a7e8.zip
kernel_samsung_smdk4412-4a6514e6d096716fb7bedf238efaaca877e2a7e8.tar.gz
kernel_samsung_smdk4412-4a6514e6d096716fb7bedf238efaaca877e2a7e8.tar.bz2
tty: move obsolete and broken tty drivers to drivers/staging/tty/
As planned by Arnd Bergmann, this moves the following drivers to the drivers/staging/tty/ directory where they will be removed after 2.6.41 if no one steps up to claim them. epca epca ip2 istallion riscom8 serial167 specialix stallion Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/char')
-rw-r--r--drivers/char/Kconfig79
-rw-r--r--drivers/char/Makefile7
-rw-r--r--drivers/char/epca.c2784
-rw-r--r--drivers/char/epca.h158
-rw-r--r--drivers/char/epcaconfig.h7
-rw-r--r--drivers/char/ip2/Makefile8
-rw-r--r--drivers/char/ip2/i2cmd.c210
-rw-r--r--drivers/char/ip2/i2cmd.h630
-rw-r--r--drivers/char/ip2/i2ellis.c1403
-rw-r--r--drivers/char/ip2/i2ellis.h566
-rw-r--r--drivers/char/ip2/i2hw.h652
-rw-r--r--drivers/char/ip2/i2lib.c2214
-rw-r--r--drivers/char/ip2/i2lib.h351
-rw-r--r--drivers/char/ip2/i2pack.h364
-rw-r--r--drivers/char/ip2/ip2.h107
-rw-r--r--drivers/char/ip2/ip2ioctl.h35
-rw-r--r--drivers/char/ip2/ip2main.c3234
-rw-r--r--drivers/char/ip2/ip2trace.h42
-rw-r--r--drivers/char/ip2/ip2types.h57
-rw-r--r--drivers/char/istallion.c4507
-rw-r--r--drivers/char/riscom8.c1560
-rw-r--r--drivers/char/riscom8.h91
-rw-r--r--drivers/char/riscom8_reg.h254
-rw-r--r--drivers/char/serial167.c2489
-rw-r--r--drivers/char/specialix.c2368
-rw-r--r--drivers/char/specialix_io8.h140
-rw-r--r--drivers/char/stallion.c4651
27 files changed, 0 insertions, 28968 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 1adfac6..7b8cf02 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -15,63 +15,6 @@ config DEVKMEM
kind of kernel debugging operations.
When in doubt, say "N".
-config COMPUTONE
- tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- ---help---
- This driver supports the entire family of Intelliport II/Plus
- controllers with the exception of the MicroChannel controllers and
- products previous to the Intelliport II. These are multiport cards,
- which give you many serial ports. You would need something like this
- to connect more than two modems to your Linux box, for instance in
- order to become a dial-in server. If you have a card like that, say
- Y here and read <file:Documentation/serial/computone.txt>.
-
- To compile this driver as module, choose M here: the
- module will be called ip2.
-
-config DIGIEPCA
- tristate "Digiboard Intelligent Async Support"
- depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
- ---help---
- This is a driver for Digi International's Xx, Xeve, and Xem series
- of cards which provide multiple serial ports. You would need
- something like this to connect more than two modems to your Linux
- box, for instance in order to become a dial-in server. This driver
- supports the original PC (ISA) boards as well as PCI, and EISA. If
- you have a card like this, say Y here and read the file
- <file:Documentation/serial/digiepca.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called epca.
-
-config RISCOM8
- tristate "SDL RISCom/8 card support"
- depends on SERIAL_NONSTANDARD
- help
- This is a driver for the SDL Communications RISCom/8 multiport card,
- which gives you many serial ports. You would need something like
- this to connect more than two modems to your Linux box, for instance
- in order to become a dial-in server. If you have a card like that,
- say Y here and read the file <file:Documentation/serial/riscom8.txt>.
-
- Also it's possible to say M here and compile this driver as kernel
- loadable module; the module will be called riscom8.
-
-config SPECIALIX
- tristate "Specialix IO8+ card support"
- depends on SERIAL_NONSTANDARD
- help
- This is a driver for the Specialix IO8+ multiport card (both the
- ISA and the PCI version) which gives you many serial ports. You
- would need something like this to connect more than two modems to
- your Linux box, for instance in order to become a dial-in server.
-
- If you have a card like that, say Y here and read the file
- <file:Documentation/serial/specialix.txt>. Also it's possible to say
- M here and compile this driver as kernel loadable module which will be
- called specialix.
-
config SX
tristate "Specialix SX (and SI) card support"
depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
@@ -112,28 +55,6 @@ config STALDRV
in this case. If you have never heard about all this, it's safe to
say N.
-config STALLION
- tristate "Stallion EasyIO or EC8/32 support"
- depends on STALDRV && (ISA || EISA || PCI)
- help
- If you have an EasyIO or EasyConnection 8/32 multiport Stallion
- card, then this is for you; say Y. Make sure to read
- <file:Documentation/serial/stallion.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called stallion.
-
-config ISTALLION
- tristate "Stallion EC8/64, ONboard, Brumby support"
- depends on STALDRV && (ISA || EISA || PCI)
- help
- If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
- serial multiport card, say Y here. Make sure to read
- <file:Documentation/serial/stallion.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called istallion.
-
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f5dc7c9..48bb8ac 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -8,15 +8,8 @@ obj-y += misc.o
obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_SERIAL167) += serial167.o
-obj-$(CONFIG_STALLION) += stallion.o
-obj-$(CONFIG_ISTALLION) += istallion.o
-obj-$(CONFIG_DIGIEPCA) += epca.o
-obj-$(CONFIG_SPECIALIX) += specialix.o
obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o
-obj-$(CONFIG_COMPUTONE) += ip2/
-obj-$(CONFIG_RISCOM8) += riscom8.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
deleted file mode 100644
index 7ad3638..0000000
--- a/drivers/char/epca.c
+++ /dev/null
@@ -1,2784 +0,0 @@
-/*
- Copyright (C) 1996 Digi International.
-
- For technical support please email digiLinux@dgii.com or
- call Digi tech support at (612) 912-3456
-
- ** This driver is no longer supported by Digi **
-
- Much of this design and code came from epca.c which was
- copyright (C) 1994, 1995 Troy De Jongh, and subsquently
- modified by David Nugent, Christoph Lameter, Mike McLagan.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/* See README.epca for change history --DAT*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-#include <linux/ctype.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-#include "digiPCI.h"
-
-
-#include "digi1.h"
-#include "digiFep1.h"
-#include "epca.h"
-#include "epcaconfig.h"
-
-#define VERSION "1.3.0.1-LK2.6"
-
-/* This major needs to be submitted to Linux to join the majors list */
-#define DIGIINFOMAJOR 35 /* For Digi specific ioctl */
-
-
-#define MAXCARDS 7
-#define epcaassert(x, msg) if (!(x)) epca_error(__LINE__, msg)
-
-#define PFX "epca: "
-
-static int nbdevs, num_cards, liloconfig;
-static int digi_poller_inhibited = 1 ;
-
-static int setup_error_code;
-static int invalid_lilo_config;
-
-/*
- * The ISA boards do window flipping into the same spaces so its only sane with
- * a single lock. It's still pretty efficient. This lock guards the hardware
- * and the tty_port lock guards the kernel side stuff like use counts. Take
- * this lock inside the port lock if you must take both.
- */
-static DEFINE_SPINLOCK(epca_lock);
-
-/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted
- to 7 below. */
-static struct board_info boards[MAXBOARDS];
-
-static struct tty_driver *pc_driver;
-static struct tty_driver *pc_info;
-
-/* ------------------ Begin Digi specific structures -------------------- */
-
-/*
- * digi_channels represents an array of structures that keep track of each
- * channel of the Digi product. Information such as transmit and receive
- * pointers, termio data, and signal definitions (DTR, CTS, etc ...) are stored
- * here. This structure is NOT used to overlay the cards physical channel
- * structure.
- */
-static struct channel digi_channels[MAX_ALLOC];
-
-/*
- * card_ptr is an array used to hold the address of the first channel structure
- * of each card. This array will hold the addresses of various channels located
- * in digi_channels.
- */
-static struct channel *card_ptr[MAXCARDS];
-
-static struct timer_list epca_timer;
-
-/*
- * Begin generic memory functions. These functions will be alias (point at)
- * more specific functions dependent on the board being configured.
- */
-static void memwinon(struct board_info *b, unsigned int win);
-static void memwinoff(struct board_info *b, unsigned int win);
-static void globalwinon(struct channel *ch);
-static void rxwinon(struct channel *ch);
-static void txwinon(struct channel *ch);
-static void memoff(struct channel *ch);
-static void assertgwinon(struct channel *ch);
-static void assertmemoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for cx_like products --- */
-
-static void pcxem_memwinon(struct board_info *b, unsigned int win);
-static void pcxem_memwinoff(struct board_info *b, unsigned int win);
-static void pcxem_globalwinon(struct channel *ch);
-static void pcxem_rxwinon(struct channel *ch);
-static void pcxem_txwinon(struct channel *ch);
-static void pcxem_memoff(struct channel *ch);
-
-/* ------ Begin more 'specific' memory functions for the pcxe ------- */
-
-static void pcxe_memwinon(struct board_info *b, unsigned int win);
-static void pcxe_memwinoff(struct board_info *b, unsigned int win);
-static void pcxe_globalwinon(struct channel *ch);
-static void pcxe_rxwinon(struct channel *ch);
-static void pcxe_txwinon(struct channel *ch);
-static void pcxe_memoff(struct channel *ch);
-
-/* ---- Begin more 'specific' memory functions for the pc64xe and pcxi ---- */
-/* Note : pc64xe and pcxi share the same windowing routines */
-
-static void pcxi_memwinon(struct board_info *b, unsigned int win);
-static void pcxi_memwinoff(struct board_info *b, unsigned int win);
-static void pcxi_globalwinon(struct channel *ch);
-static void pcxi_rxwinon(struct channel *ch);
-static void pcxi_txwinon(struct channel *ch);
-static void pcxi_memoff(struct channel *ch);
-
-/* - Begin 'specific' do nothing memory functions needed for some cards - */
-
-static void dummy_memwinon(struct board_info *b, unsigned int win);
-static void dummy_memwinoff(struct board_info *b, unsigned int win);
-static void dummy_globalwinon(struct channel *ch);
-static void dummy_rxwinon(struct channel *ch);
-static void dummy_txwinon(struct channel *ch);
-static void dummy_memoff(struct channel *ch);
-static void dummy_assertgwinon(struct channel *ch);
-static void dummy_assertmemoff(struct channel *ch);
-
-static struct channel *verifyChannel(struct tty_struct *);
-static void pc_sched_event(struct channel *, int);
-static void epca_error(int, char *);
-static void pc_close(struct tty_struct *, struct file *);
-static void shutdown(struct channel *, struct tty_struct *tty);
-static void pc_hangup(struct tty_struct *);
-static int pc_write_room(struct tty_struct *);
-static int pc_chars_in_buffer(struct tty_struct *);
-static void pc_flush_buffer(struct tty_struct *);
-static void pc_flush_chars(struct tty_struct *);
-static int pc_open(struct tty_struct *, struct file *);
-static void post_fep_init(unsigned int crd);
-static void epcapoll(unsigned long);
-static void doevent(int);
-static void fepcmd(struct channel *, int, int, int, int, int);
-static unsigned termios2digi_h(struct channel *ch, unsigned);
-static unsigned termios2digi_i(struct channel *ch, unsigned);
-static unsigned termios2digi_c(struct channel *ch, unsigned);
-static void epcaparam(struct tty_struct *, struct channel *);
-static void receive_data(struct channel *, struct tty_struct *tty);
-static int pc_ioctl(struct tty_struct *,
- unsigned int, unsigned long);
-static int info_ioctl(struct tty_struct *,
- unsigned int, unsigned long);
-static void pc_set_termios(struct tty_struct *, struct ktermios *);
-static void do_softint(struct work_struct *work);
-static void pc_stop(struct tty_struct *);
-static void pc_start(struct tty_struct *);
-static void pc_throttle(struct tty_struct *tty);
-static void pc_unthrottle(struct tty_struct *tty);
-static int pc_send_break(struct tty_struct *tty, int msec);
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
-
-static int pc_write(struct tty_struct *, const unsigned char *, int);
-static int pc_init(void);
-static int init_PCI(void);
-
-/*
- * Table of functions for each board to handle memory. Mantaining parallelism
- * is a *very* good idea here. The idea is for the runtime code to blindly call
- * these functions, not knowing/caring about the underlying hardware. This
- * stuff should contain no conditionals; if more functionality is needed a
- * different entry should be established. These calls are the interface calls
- * and are the only functions that should be accessed. Anyone caught making
- * direct calls deserves what they get.
- */
-static void memwinon(struct board_info *b, unsigned int win)
-{
- b->memwinon(b, win);
-}
-
-static void memwinoff(struct board_info *b, unsigned int win)
-{
- b->memwinoff(b, win);
-}
-
-static void globalwinon(struct channel *ch)
-{
- ch->board->globalwinon(ch);
-}
-
-static void rxwinon(struct channel *ch)
-{
- ch->board->rxwinon(ch);
-}
-
-static void txwinon(struct channel *ch)
-{
- ch->board->txwinon(ch);
-}
-
-static void memoff(struct channel *ch)
-{
- ch->board->memoff(ch);
-}
-static void assertgwinon(struct channel *ch)
-{
- ch->board->assertgwinon(ch);
-}
-
-static void assertmemoff(struct channel *ch)
-{
- ch->board->assertmemoff(ch);
-}
-
-/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */
-static void pcxem_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(FEPWIN | win, b->port + 1);
-}
-
-static void pcxem_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(0, b->port + 1);
-}
-
-static void pcxem_globalwinon(struct channel *ch)
-{
- outb_p(FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxem_rxwinon(struct channel *ch)
-{
- outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_txwinon(struct channel *ch)
-{
- outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxem_memoff(struct channel *ch)
-{
- outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ----------------- Begin pcxe memory window stuff ------------------ */
-static void pcxe_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(FEPWIN | win, b->port + 1);
-}
-
-static void pcxe_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) & ~FEPMEM, b->port + 1);
- outb_p(0, b->port + 1);
-}
-
-static void pcxe_globalwinon(struct channel *ch)
-{
- outb_p(FEPWIN, (int)ch->board->port + 1);
-}
-
-static void pcxe_rxwinon(struct channel *ch)
-{
- outb_p(ch->rxwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_txwinon(struct channel *ch)
-{
- outb_p(ch->txwin, (int)ch->board->port + 1);
-}
-
-static void pcxe_memoff(struct channel *ch)
-{
- outb_p(0, (int)ch->board->port);
- outb_p(0, (int)ch->board->port + 1);
-}
-
-/* ------------- Begin pc64xe and pcxi memory window stuff -------------- */
-static void pcxi_memwinon(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) | FEPMEM, b->port);
-}
-
-static void pcxi_memwinoff(struct board_info *b, unsigned int win)
-{
- outb_p(inb(b->port) & ~FEPMEM, b->port);
-}
-
-static void pcxi_globalwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_rxwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_txwinon(struct channel *ch)
-{
- outb_p(FEPMEM, ch->board->port);
-}
-
-static void pcxi_memoff(struct channel *ch)
-{
- outb_p(0, ch->board->port);
-}
-
-static void pcxi_assertgwinon(struct channel *ch)
-{
- epcaassert(inb(ch->board->port) & FEPMEM, "Global memory off");
-}
-
-static void pcxi_assertmemoff(struct channel *ch)
-{
- epcaassert(!(inb(ch->board->port) & FEPMEM), "Memory on");
-}
-
-/*
- * Not all of the cards need specific memory windowing routines. Some cards
- * (Such as PCI) needs no windowing routines at all. We provide these do
- * nothing routines so that the same code base can be used. The driver will
- * ALWAYS call a windowing routine if it thinks it needs to; regardless of the
- * card. However, dependent on the card the routine may or may not do anything.
- */
-static void dummy_memwinon(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_memwinoff(struct board_info *b, unsigned int win)
-{
-}
-
-static void dummy_globalwinon(struct channel *ch)
-{
-}
-
-static void dummy_rxwinon(struct channel *ch)
-{
-}
-
-static void dummy_txwinon(struct channel *ch)
-{
-}
-
-static void dummy_memoff(struct channel *ch)
-{
-}
-
-static void dummy_assertgwinon(struct channel *ch)
-{
-}
-
-static void dummy_assertmemoff(struct channel *ch)
-{
-}
-
-static struct channel *verifyChannel(struct tty_struct *tty)
-{
- /*
- * This routine basically provides a sanity check. It insures that the
- * channel returned is within the proper range of addresses as well as
- * properly initialized. If some bogus info gets passed in
- * through tty->driver_data this should catch it.
- */
- if (tty) {
- struct channel *ch = tty->driver_data;
- if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) {
- if (ch->magic == EPCA_MAGIC)
- return ch;
- }
- }
- return NULL;
-}
-
-static void pc_sched_event(struct channel *ch, int event)
-{
- /*
- * We call this to schedule interrupt processing on some event. The
- * kernel sees our request and calls the related routine in OUR driver.
- */
- ch->event |= 1 << event;
- schedule_work(&ch->tqueue);
-}
-
-static void epca_error(int line, char *msg)
-{
- printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg);
-}
-
-static void pc_close(struct tty_struct *tty, struct file *filp)
-{
- struct channel *ch;
- struct tty_port *port;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch == NULL)
- return;
- port = &ch->port;
-
- if (tty_port_close_start(port, tty, filp) == 0)
- return;
-
- pc_flush_buffer(tty);
- shutdown(ch, tty);
-
- tty_port_close_end(port, tty);
- ch->event = 0; /* FIXME: review ch->event locking */
- tty_port_tty_set(port, NULL);
-}
-
-static void shutdown(struct channel *ch, struct tty_struct *tty)
-{
- unsigned long flags;
- struct board_chan __iomem *bc;
- struct tty_port *port = &ch->port;
-
- if (!(port->flags & ASYNC_INITIALIZED))
- return;
-
- spin_lock_irqsave(&epca_lock, flags);
-
- globalwinon(ch);
- bc = ch->brdchan;
-
- /*
- * In order for an event to be generated on the receipt of data the
- * idata flag must be set. Since we are shutting down, this is not
- * necessary clear this flag.
- */
- if (bc)
- writeb(0, &bc->idata);
-
- /* If we're a modem control device and HUPCL is on, drop RTS & DTR. */
- if (tty->termios->c_cflag & HUPCL) {
- ch->omodem &= ~(ch->m_rts | ch->m_dtr);
- fepcmd(ch, SETMODEM, 0, ch->m_dtr | ch->m_rts, 10, 1);
- }
- memoff(ch);
-
- /*
- * The channel has officialy been closed. The next time it is opened it
- * will have to reinitialized. Set a flag to indicate this.
- */
- /* Prevent future Digi programmed interrupts from coming active */
- port->flags &= ~ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&epca_lock, flags);
-}
-
-static void pc_hangup(struct tty_struct *tty)
-{
- struct channel *ch;
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- pc_flush_buffer(tty);
- tty_ldisc_flush(tty);
- shutdown(ch, tty);
-
- ch->event = 0; /* FIXME: review locking of ch->event */
- tty_port_hangup(&ch->port);
- }
-}
-
-static int pc_write(struct tty_struct *tty,
- const unsigned char *buf, int bytesAvailable)
-{
- unsigned int head, tail;
- int dataLen;
- int size;
- int amountCopied;
- struct channel *ch;
- unsigned long flags;
- int remain;
- struct board_chan __iomem *bc;
-
- /*
- * pc_write is primarily called directly by the kernel routine
- * tty_write (Though it can also be called by put_char) found in
- * tty_io.c. pc_write is passed a line discipline buffer where the data
- * to be written out is stored. The line discipline implementation
- * itself is done at the kernel level and is not brought into the
- * driver.
- */
-
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch == NULL)
- return 0;
-
- /* Make a pointer to the channel data structure found on the board. */
- bc = ch->brdchan;
- size = ch->txbufsize;
- amountCopied = 0;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- head = readw(&bc->tin) & (size - 1);
- tail = readw(&bc->tout);
-
- if (tail != readw(&bc->tout))
- tail = readw(&bc->tout);
- tail &= (size - 1);
-
- if (head >= tail) {
- /* head has not wrapped */
- /*
- * remain (much like dataLen above) represents the total amount
- * of space available on the card for data. Here dataLen
- * represents the space existing between the head pointer and
- * the end of buffer. This is important because a memcpy cannot
- * be told to automatically wrap around when it hits the buffer
- * end.
- */
- dataLen = size - head;
- remain = size - (head - tail) - 1;
- } else {
- /* head has wrapped around */
- remain = tail - head - 1;
- dataLen = remain;
- }
- /*
- * Check the space on the card. If we have more data than space; reduce
- * the amount of data to fit the space.
- */
- bytesAvailable = min(remain, bytesAvailable);
- txwinon(ch);
- while (bytesAvailable > 0) {
- /* there is data to copy onto card */
-
- /*
- * If head is not wrapped, the below will make sure the first
- * data copy fills to the end of card buffer.
- */
- dataLen = min(bytesAvailable, dataLen);
- memcpy_toio(ch->txptr + head, buf, dataLen);
- buf += dataLen;
- head += dataLen;
- amountCopied += dataLen;
- bytesAvailable -= dataLen;
-
- if (head >= size) {
- head = 0;
- dataLen = tail;
- }
- }
- ch->statusflags |= TXBUSY;
- globalwinon(ch);
- writew(head, &bc->tin);
-
- if ((ch->statusflags & LOWWAIT) == 0) {
- ch->statusflags |= LOWWAIT;
- writeb(1, &bc->ilow);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return amountCopied;
-}
-
-static int pc_write_room(struct tty_struct *tty)
-{
- int remain = 0;
- struct channel *ch;
- unsigned long flags;
- unsigned int head, tail;
- struct board_chan __iomem *bc;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- bc = ch->brdchan;
- head = readw(&bc->tin) & (ch->txbufsize - 1);
- tail = readw(&bc->tout);
-
- if (tail != readw(&bc->tout))
- tail = readw(&bc->tout);
- /* Wrap tail if necessary */
- tail &= (ch->txbufsize - 1);
- remain = tail - head - 1;
- if (remain < 0)
- remain += ch->txbufsize;
-
- if (remain && (ch->statusflags & LOWWAIT) == 0) {
- ch->statusflags |= LOWWAIT;
- writeb(1, &bc->ilow);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- }
- /* Return how much room is left on card */
- return remain;
-}
-
-static int pc_chars_in_buffer(struct tty_struct *tty)
-{
- int chars;
- unsigned int ctail, head, tail;
- int remain;
- unsigned long flags;
- struct channel *ch;
- struct board_chan __iomem *bc;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch == NULL)
- return 0;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- bc = ch->brdchan;
- tail = readw(&bc->tout);
- head = readw(&bc->tin);
- ctail = readw(&ch->mailbox->cout);
-
- if (tail == head && readw(&ch->mailbox->cin) == ctail &&
- readb(&bc->tbusy) == 0)
- chars = 0;
- else { /* Begin if some space on the card has been used */
- head = readw(&bc->tin) & (ch->txbufsize - 1);
- tail &= (ch->txbufsize - 1);
- /*
- * The logic here is basically opposite of the above
- * pc_write_room here we are finding the amount of bytes in the
- * buffer filled. Not the amount of bytes empty.
- */
- remain = tail - head - 1;
- if (remain < 0)
- remain += ch->txbufsize;
- chars = (int)(ch->txbufsize - remain);
- /*
- * Make it possible to wakeup anything waiting for output in
- * tty_ioctl.c, etc.
- *
- * If not already set. Setup an event to indicate when the
- * transmit buffer empties.
- */
- if (!(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty, ch);
- } /* End if some space on the card has been used */
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- /* Return number of characters residing on card. */
- return chars;
-}
-
-static void pc_flush_buffer(struct tty_struct *tty)
-{
- unsigned int tail;
- unsigned long flags;
- struct channel *ch;
- struct board_chan __iomem *bc;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch == NULL)
- return;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- bc = ch->brdchan;
- tail = readw(&bc->tout);
- /* Have FEP move tout pointer; effectively flushing transmit buffer */
- fepcmd(ch, STOUT, (unsigned) tail, 0, 0, 0);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wakeup(tty);
-}
-
-static void pc_flush_chars(struct tty_struct *tty)
-{
- struct channel *ch;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- unsigned long flags;
- spin_lock_irqsave(&epca_lock, flags);
- /*
- * If not already set and the transmitter is busy setup an
- * event to indicate when the transmit empties.
- */
- if ((ch->statusflags & TXBUSY) &&
- !(ch->statusflags & EMPTYWAIT))
- setup_empty_event(tty, ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static int epca_carrier_raised(struct tty_port *port)
-{
- struct channel *ch = container_of(port, struct channel, port);
- if (ch->imodem & ch->dcd)
- return 1;
- return 0;
-}
-
-static void epca_dtr_rts(struct tty_port *port, int onoff)
-{
-}
-
-static int pc_open(struct tty_struct *tty, struct file *filp)
-{
- struct channel *ch;
- struct tty_port *port;
- unsigned long flags;
- int line, retval, boardnum;
- struct board_chan __iomem *bc;
- unsigned int head;
-
- line = tty->index;
- if (line < 0 || line >= nbdevs)
- return -ENODEV;
-
- ch = &digi_channels[line];
- port = &ch->port;
- boardnum = ch->boardnum;
-
- /* Check status of board configured in system. */
-
- /*
- * I check to see if the epca_setup routine detected a user error. It
- * might be better to put this in pc_init, but for the moment it goes
- * here.
- */
- if (invalid_lilo_config) {
- if (setup_error_code & INVALID_BOARD_TYPE)
- printk(KERN_ERR "epca: pc_open: Invalid board type specified in kernel options.\n");
- if (setup_error_code & INVALID_NUM_PORTS)
- printk(KERN_ERR "epca: pc_open: Invalid number of ports specified in kernel options.\n");
- if (setup_error_code & INVALID_MEM_BASE)
- printk(KERN_ERR "epca: pc_open: Invalid board memory address specified in kernel options.\n");
- if (setup_error_code & INVALID_PORT_BASE)
- printk(KERN_ERR "epca; pc_open: Invalid board port address specified in kernel options.\n");
- if (setup_error_code & INVALID_BOARD_STATUS)
- printk(KERN_ERR "epca: pc_open: Invalid board status specified in kernel options.\n");
- if (setup_error_code & INVALID_ALTPIN)
- printk(KERN_ERR "epca: pc_open: Invalid board altpin specified in kernel options;\n");
- tty->driver_data = NULL; /* Mark this device as 'down' */
- return -ENODEV;
- }
- if (boardnum >= num_cards || boards[boardnum].status == DISABLED) {
- tty->driver_data = NULL; /* Mark this device as 'down' */
- return(-ENODEV);
- }
-
- bc = ch->brdchan;
- if (bc == NULL) {
- tty->driver_data = NULL;
- return -ENODEV;
- }
-
- spin_lock_irqsave(&port->lock, flags);
- /*
- * Every time a channel is opened, increment a counter. This is
- * necessary because we do not wish to flush and shutdown the channel
- * until the last app holding the channel open, closes it.
- */
- port->count++;
- /*
- * Set a kernel structures pointer to our local channel structure. This
- * way we can get to it when passed only a tty struct.
- */
- tty->driver_data = ch;
- port->tty = tty;
- /*
- * If this is the first time the channel has been opened, initialize
- * the tty->termios struct otherwise let pc_close handle it.
- */
- spin_lock(&epca_lock);
- globalwinon(ch);
- ch->statusflags = 0;
-
- /* Save boards current modem status */
- ch->imodem = readb(&bc->mstat);
-
- /*
- * Set receive head and tail ptrs to each other. This indicates no data
- * available to read.
- */
- head = readw(&bc->rin);
- writew(head, &bc->rout);
-
- /* Set the channels associated tty structure */
-
- /*
- * The below routine generally sets up parity, baud, flow control
- * issues, etc.... It effect both control flags and input flags.
- */
- epcaparam(tty, ch);
- memoff(ch);
- spin_unlock(&epca_lock);
- port->flags |= ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&port->lock, flags);
-
- retval = tty_port_block_til_ready(port, tty, filp);
- if (retval)
- return retval;
- /*
- * Set this again in case a hangup set it to zero while this open() was
- * waiting for the line...
- */
- spin_lock_irqsave(&port->lock, flags);
- port->tty = tty;
- spin_lock(&epca_lock);
- globalwinon(ch);
- /* Enable Digi Data events */
- writeb(1, &bc->idata);
- memoff(ch);
- spin_unlock(&epca_lock);
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
-}
-
-static int __init epca_module_init(void)
-{
- return pc_init();
-}
-module_init(epca_module_init);
-
-static struct pci_driver epca_driver;
-
-static void __exit epca_module_exit(void)
-{
- int count, crd;
- struct board_info *bd;
- struct channel *ch;
-
- del_timer_sync(&epca_timer);
-
- if (tty_unregister_driver(pc_driver) ||
- tty_unregister_driver(pc_info)) {
- printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
- return;
- }
- put_tty_driver(pc_driver);
- put_tty_driver(pc_info);
-
- for (crd = 0; crd < num_cards; crd++) {
- bd = &boards[crd];
- if (!bd) { /* sanity check */
- printk(KERN_ERR "<Error> - Digi : cleanup_module failed\n");
- return;
- }
- ch = card_ptr[crd];
- for (count = 0; count < bd->numports; count++, ch++) {
- struct tty_struct *tty = tty_port_tty_get(&ch->port);
- if (tty) {
- tty_hangup(tty);
- tty_kref_put(tty);
- }
- }
- }
- pci_unregister_driver(&epca_driver);
-}
-module_exit(epca_module_exit);
-
-static const struct tty_operations pc_ops = {
- .open = pc_open,
- .close = pc_close,
- .write = pc_write,
- .write_room = pc_write_room,
- .flush_buffer = pc_flush_buffer,
- .chars_in_buffer = pc_chars_in_buffer,
- .flush_chars = pc_flush_chars,
- .ioctl = pc_ioctl,
- .set_termios = pc_set_termios,
- .stop = pc_stop,
- .start = pc_start,
- .throttle = pc_throttle,
- .unthrottle = pc_unthrottle,
- .hangup = pc_hangup,
- .break_ctl = pc_send_break
-};
-
-static const struct tty_port_operations epca_port_ops = {
- .carrier_raised = epca_carrier_raised,
- .dtr_rts = epca_dtr_rts,
-};
-
-static int info_open(struct tty_struct *tty, struct file *filp)
-{
- return 0;
-}
-
-static const struct tty_operations info_ops = {
- .open = info_open,
- .ioctl = info_ioctl,
-};
-
-static int __init pc_init(void)
-{
- int crd;
- struct board_info *bd;
- unsigned char board_id = 0;
- int err = -ENOMEM;
-
- int pci_boards_found, pci_count;
-
- pci_count = 0;
-
- pc_driver = alloc_tty_driver(MAX_ALLOC);
- if (!pc_driver)
- goto out1;
-
- pc_info = alloc_tty_driver(MAX_ALLOC);
- if (!pc_info)
- goto out2;
-
- /*
- * If epca_setup has not been ran by LILO set num_cards to defaults;
- * copy board structure defined by digiConfig into drivers board
- * structure. Note : If LILO has ran epca_setup then epca_setup will
- * handle defining num_cards as well as copying the data into the board
- * structure.
- */
- if (!liloconfig) {
- /* driver has been configured via. epcaconfig */
- nbdevs = NBDEVS;
- num_cards = NUMCARDS;
- memcpy(&boards, &static_boards,
- sizeof(struct board_info) * NUMCARDS);
- }
-
- /*
- * Note : If lilo was used to configure the driver and the ignore
- * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
- * will equal 0 at this point. This is okay; PCI cards will still be
- * picked up if detected.
- */
-
- /*
- * Set up interrupt, we will worry about memory allocation in
- * post_fep_init.
- */
- printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION);
-
- /*
- * NOTE : This code assumes that the number of ports found in the
- * boards array is correct. This could be wrong if the card in question
- * is PCI (And therefore has no ports entry in the boards structure.)
- * The rest of the information will be valid for PCI because the
- * beginning of pc_init scans for PCI and determines i/o and base
- * memory addresses. I am not sure if it is possible to read the number
- * of ports supported by the card prior to it being booted (Since that
- * is the state it is in when pc_init is run). Because it is not
- * possible to query the number of supported ports until after the card
- * has booted; we are required to calculate the card_ptrs as the card
- * is initialized (Inside post_fep_init). The negative thing about this
- * approach is that digiDload's call to GET_INFO will have a bad port
- * value. (Since this is called prior to post_fep_init.)
- */
- pci_boards_found = 0;
- if (num_cards < MAXBOARDS)
- pci_boards_found += init_PCI();
- num_cards += pci_boards_found;
-
- pc_driver->owner = THIS_MODULE;
- pc_driver->name = "ttyD";
- pc_driver->major = DIGI_MAJOR;
- pc_driver->minor_start = 0;
- pc_driver->type = TTY_DRIVER_TYPE_SERIAL;
- pc_driver->subtype = SERIAL_TYPE_NORMAL;
- pc_driver->init_termios = tty_std_termios;
- pc_driver->init_termios.c_iflag = 0;
- pc_driver->init_termios.c_oflag = 0;
- pc_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- pc_driver->init_termios.c_lflag = 0;
- pc_driver->init_termios.c_ispeed = 9600;
- pc_driver->init_termios.c_ospeed = 9600;
- pc_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
- tty_set_operations(pc_driver, &pc_ops);
-
- pc_info->owner = THIS_MODULE;
- pc_info->name = "digi_ctl";
- pc_info->major = DIGIINFOMAJOR;
- pc_info->minor_start = 0;
- pc_info->type = TTY_DRIVER_TYPE_SERIAL;
- pc_info->subtype = SERIAL_TYPE_INFO;
- pc_info->init_termios = tty_std_termios;
- pc_info->init_termios.c_iflag = 0;
- pc_info->init_termios.c_oflag = 0;
- pc_info->init_termios.c_lflag = 0;
- pc_info->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL;
- pc_info->init_termios.c_ispeed = 9600;
- pc_info->init_termios.c_ospeed = 9600;
- pc_info->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(pc_info, &info_ops);
-
-
- for (crd = 0; crd < num_cards; crd++) {
- /*
- * This is where the appropriate memory handlers for the
- * hardware is set. Everything at runtime blindly jumps through
- * these vectors.
- */
-
- /* defined in epcaconfig.h */
- bd = &boards[crd];
-
- switch (bd->type) {
- case PCXEM:
- case EISAXEM:
- bd->memwinon = pcxem_memwinon;
- bd->memwinoff = pcxem_memwinoff;
- bd->globalwinon = pcxem_globalwinon;
- bd->txwinon = pcxem_txwinon;
- bd->rxwinon = pcxem_rxwinon;
- bd->memoff = pcxem_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- bd->memwinon = dummy_memwinon;
- bd->memwinoff = dummy_memwinoff;
- bd->globalwinon = dummy_globalwinon;
- bd->txwinon = dummy_txwinon;
- bd->rxwinon = dummy_rxwinon;
- bd->memoff = dummy_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCXE:
- case PCXEVE:
- bd->memwinon = pcxe_memwinon;
- bd->memwinoff = pcxe_memwinoff;
- bd->globalwinon = pcxe_globalwinon;
- bd->txwinon = pcxe_txwinon;
- bd->rxwinon = pcxe_rxwinon;
- bd->memoff = pcxe_memoff;
- bd->assertgwinon = dummy_assertgwinon;
- bd->assertmemoff = dummy_assertmemoff;
- break;
-
- case PCXI:
- case PC64XE:
- bd->memwinon = pcxi_memwinon;
- bd->memwinoff = pcxi_memwinoff;
- bd->globalwinon = pcxi_globalwinon;
- bd->txwinon = pcxi_txwinon;
- bd->rxwinon = pcxi_rxwinon;
- bd->memoff = pcxi_memoff;
- bd->assertgwinon = pcxi_assertgwinon;
- bd->assertmemoff = pcxi_assertmemoff;
- break;
-
- default:
- break;
- }
-
- /*
- * Some cards need a memory segment to be defined for use in
- * transmit and receive windowing operations. These boards are
- * listed in the below switch. In the case of the XI the amount
- * of memory on the board is variable so the memory_seg is also
- * variable. This code determines what they segment should be.
- */
- switch (bd->type) {
- case PCXE:
- case PCXEVE:
- case PC64XE:
- bd->memory_seg = 0xf000;
- break;
-
- case PCXI:
- board_id = inb((int)bd->port);
- if ((board_id & 0x1) == 0x1) {
- /* it's an XI card */
- /* Is it a 64K board */
- if ((board_id & 0x30) == 0)
- bd->memory_seg = 0xf000;
-
- /* Is it a 128K board */
- if ((board_id & 0x30) == 0x10)
- bd->memory_seg = 0xe000;
-
- /* Is is a 256K board */
- if ((board_id & 0x30) == 0x20)
- bd->memory_seg = 0xc000;
-
- /* Is it a 512K board */
- if ((board_id & 0x30) == 0x30)
- bd->memory_seg = 0x8000;
- } else
- printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port);
- break;
- }
- }
-
- err = tty_register_driver(pc_driver);
- if (err) {
- printk(KERN_ERR "Couldn't register Digi PC/ driver");
- goto out3;
- }
-
- err = tty_register_driver(pc_info);
- if (err) {
- printk(KERN_ERR "Couldn't register Digi PC/ info ");
- goto out4;
- }
-
- /* Start up the poller to check for events on all enabled boards */
- init_timer(&epca_timer);
- epca_timer.function = epcapoll;
- mod_timer(&epca_timer, jiffies + HZ/25);
- return 0;
-
-out4:
- tty_unregister_driver(pc_driver);
-out3:
- put_tty_driver(pc_info);
-out2:
- put_tty_driver(pc_driver);
-out1:
- return err;
-}
-
-static void post_fep_init(unsigned int crd)
-{
- int i;
- void __iomem *memaddr;
- struct global_data __iomem *gd;
- struct board_info *bd;
- struct board_chan __iomem *bc;
- struct channel *ch;
- int shrinkmem = 0, lowwater;
-
- /*
- * This call is made by the user via. the ioctl call DIGI_INIT. It is
- * responsible for setting up all the card specific stuff.
- */
- bd = &boards[crd];
-
- /*
- * If this is a PCI board, get the port info. Remember PCI cards do not
- * have entries into the epcaconfig.h file, so we can't get the number
- * of ports from it. Unfortunetly, this means that anyone doing a
- * DIGI_GETINFO before the board has booted will get an invalid number
- * of ports returned (It should return 0). Calls to DIGI_GETINFO after
- * DIGI_INIT has been called will return the proper values.
- */
- if (bd->type >= PCIXEM) { /* Begin get PCI number of ports */
- /*
- * Below we use XEMPORTS as a memory offset regardless of which
- * PCI card it is. This is because all of the supported PCI
- * cards have the same memory offset for the channel data. This
- * will have to be changed if we ever develop a PCI/XE card.
- * NOTE : The FEP manual states that the port offset is 0xC22
- * as opposed to 0xC02. This is only true for PC/XE, and PC/XI
- * cards; not for the XEM, or CX series. On the PCI cards the
- * number of ports is determined by reading a ID PROM located
- * in the box attached to the card. The card can then determine
- * the index the id to determine the number of ports available.
- * (FYI - The id should be located at 0x1ac (And may use up to
- * 4 bytes if the box in question is a XEM or CX)).
- */
- /* PCI cards are already remapped at this point ISA are not */
- bd->numports = readw(bd->re_map_membase + XEMPORTS);
- epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports");
- nbdevs += (bd->numports);
- } else {
- /* Fix up the mappings for ISA/EISA etc */
- /* FIXME: 64K - can we be smarter ? */
- bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000);
- }
-
- if (crd != 0)
- card_ptr[crd] = card_ptr[crd-1] + boards[crd-1].numports;
- else
- card_ptr[crd] = &digi_channels[crd]; /* <- For card 0 only */
-
- ch = card_ptr[crd];
- epcaassert(ch <= &digi_channels[nbdevs - 1], "ch out of range");
-
- memaddr = bd->re_map_membase;
-
- /*
- * The below assignment will set bc to point at the BEGINING of the
- * cards channel structures. For 1 card there will be between 8 and 64
- * of these structures.
- */
- bc = memaddr + CHANSTRUCT;
-
- /*
- * The below assignment will set gd to point at the BEGINING of global
- * memory address 0xc00. The first data in that global memory actually
- * starts at address 0xc1a. The command in pointer begins at 0xd10.
- */
- gd = memaddr + GLOBAL;
-
- /*
- * XEPORTS (address 0xc22) points at the number of channels the card
- * supports. (For 64XE, XI, XEM, and XR use 0xc02)
- */
- if ((bd->type == PCXEVE || bd->type == PCXE) &&
- (readw(memaddr + XEPORTS) < 3))
- shrinkmem = 1;
- if (bd->type < PCIXEM)
- if (!request_region((int)bd->port, 4, board_desc[bd->type]))
- return;
- memwinon(bd, 0);
-
- /*
- * Remember ch is the main drivers channels structure, while bc is the
- * cards channel structure.
- */
- for (i = 0; i < bd->numports; i++, ch++, bc++) {
- unsigned long flags;
- u16 tseg, rseg;
-
- tty_port_init(&ch->port);
- ch->port.ops = &epca_port_ops;
- ch->brdchan = bc;
- ch->mailbox = gd;
- INIT_WORK(&ch->tqueue, do_softint);
- ch->board = &boards[crd];
-
- spin_lock_irqsave(&epca_lock, flags);
- switch (bd->type) {
- /*
- * Since some of the boards use different bitmaps for
- * their control signals we cannot hard code these
- * values and retain portability. We virtualize this
- * data here.
- */
- case EISAXEM:
- case PCXEM:
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- ch->m_rts = 0x02;
- ch->m_dcd = 0x80;
- ch->m_dsr = 0x20;
- ch->m_cts = 0x10;
- ch->m_ri = 0x40;
- ch->m_dtr = 0x01;
- break;
-
- case PCXE:
- case PCXEVE:
- case PCXI:
- case PC64XE:
- ch->m_rts = 0x02;
- ch->m_dcd = 0x08;
- ch->m_dsr = 0x10;
- ch->m_cts = 0x20;
- ch->m_ri = 0x40;
- ch->m_dtr = 0x80;
- break;
- }
-
- if (boards[crd].altpin) {
- ch->dsr = ch->m_dcd;
- ch->dcd = ch->m_dsr;
- ch->digiext.digi_flags |= DIGI_ALTPIN;
- } else {
- ch->dcd = ch->m_dcd;
- ch->dsr = ch->m_dsr;
- }
-
- ch->boardnum = crd;
- ch->channelnum = i;
- ch->magic = EPCA_MAGIC;
- tty_port_tty_set(&ch->port, NULL);
-
- if (shrinkmem) {
- fepcmd(ch, SETBUFFER, 32, 0, 0, 0);
- shrinkmem = 0;
- }
-
- tseg = readw(&bc->tseg);
- rseg = readw(&bc->rseg);
-
- switch (bd->type) {
- case PCIXEM:
- case PCIXRJ:
- case PCIXR:
- /* Cover all the 2MEG cards */
- ch->txptr = memaddr + ((tseg << 4) & 0x1fffff);
- ch->rxptr = memaddr + ((rseg << 4) & 0x1fffff);
- ch->txwin = FEPWIN | (tseg >> 11);
- ch->rxwin = FEPWIN | (rseg >> 11);
- break;
-
- case PCXEM:
- case EISAXEM:
- /* Cover all the 32K windowed cards */
- /* Mask equal to window size - 1 */
- ch->txptr = memaddr + ((tseg << 4) & 0x7fff);
- ch->rxptr = memaddr + ((rseg << 4) & 0x7fff);
- ch->txwin = FEPWIN | (tseg >> 11);
- ch->rxwin = FEPWIN | (rseg >> 11);
- break;
-
- case PCXEVE:
- case PCXE:
- ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4)
- & 0x1fff);
- ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
- ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4)
- & 0x1fff);
- ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9);
- break;
-
- case PCXI:
- case PC64XE:
- ch->txptr = memaddr + ((tseg - bd->memory_seg) << 4);
- ch->rxptr = memaddr + ((rseg - bd->memory_seg) << 4);
- ch->txwin = ch->rxwin = 0;
- break;
- }
-
- ch->txbufhead = 0;
- ch->txbufsize = readw(&bc->tmax) + 1;
-
- ch->rxbufhead = 0;
- ch->rxbufsize = readw(&bc->rmax) + 1;
-
- lowwater = ch->txbufsize >= 2000 ? 1024 : (ch->txbufsize / 2);
-
- /* Set transmitter low water mark */
- fepcmd(ch, STXLWATER, lowwater, 0, 10, 0);
-
- /* Set receiver low water mark */
- fepcmd(ch, SRXLWATER, (ch->rxbufsize / 4), 0, 10, 0);
-
- /* Set receiver high water mark */
- fepcmd(ch, SRXHWATER, (3 * ch->rxbufsize / 4), 0, 10, 0);
-
- writew(100, &bc->edelay);
- writeb(1, &bc->idata);
-
- ch->startc = readb(&bc->startc);
- ch->stopc = readb(&bc->stopc);
- ch->startca = readb(&bc->startca);
- ch->stopca = readb(&bc->stopca);
-
- ch->fepcflag = 0;
- ch->fepiflag = 0;
- ch->fepoflag = 0;
- ch->fepstartc = 0;
- ch->fepstopc = 0;
- ch->fepstartca = 0;
- ch->fepstopca = 0;
-
- ch->port.close_delay = 50;
-
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-
- printk(KERN_INFO
- "Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
- VERSION, board_desc[bd->type], (long)bd->port,
- (long)bd->membase, bd->numports);
- memwinoff(bd, 0);
-}
-
-static void epcapoll(unsigned long ignored)
-{
- unsigned long flags;
- int crd;
- unsigned int head, tail;
- struct channel *ch;
- struct board_info *bd;
-
- /*
- * This routine is called upon every timer interrupt. Even though the
- * Digi series cards are capable of generating interrupts this method
- * of non-looping polling is more efficient. This routine checks for
- * card generated events (Such as receive data, are transmit buffer
- * empty) and acts on those events.
- */
- for (crd = 0; crd < num_cards; crd++) {
- bd = &boards[crd];
- ch = card_ptr[crd];
-
- if ((bd->status == DISABLED) || digi_poller_inhibited)
- continue;
-
- /*
- * assertmemoff is not needed here; indeed it is an empty
- * subroutine. It is being kept because future boards may need
- * this as well as some legacy boards.
- */
- spin_lock_irqsave(&epca_lock, flags);
-
- assertmemoff(ch);
-
- globalwinon(ch);
-
- /*
- * In this case head and tail actually refer to the event queue
- * not the transmit or receive queue.
- */
- head = readw(&ch->mailbox->ein);
- tail = readw(&ch->mailbox->eout);
-
- /* If head isn't equal to tail we have an event */
- if (head != tail)
- doevent(crd);
- memoff(ch);
-
- spin_unlock_irqrestore(&epca_lock, flags);
- } /* End for each card */
- mod_timer(&epca_timer, jiffies + (HZ / 25));
-}
-
-static void doevent(int crd)
-{
- void __iomem *eventbuf;
- struct channel *ch, *chan0;
- static struct tty_struct *tty;
- struct board_info *bd;
- struct board_chan __iomem *bc;
- unsigned int tail, head;
- int event, channel;
- int mstat, lstat;
-
- /*
- * This subroutine is called by epcapoll when an event is detected
- * in the event queue. This routine responds to those events.
- */
- bd = &boards[crd];
-
- chan0 = card_ptr[crd];
- epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
- assertgwinon(chan0);
- while ((tail = readw(&chan0->mailbox->eout)) !=
- (head = readw(&chan0->mailbox->ein))) {
- /* Begin while something in event queue */
- assertgwinon(chan0);
- eventbuf = bd->re_map_membase + tail + ISTART;
- /* Get the channel the event occurred on */
- channel = readb(eventbuf);
- /* Get the actual event code that occurred */
- event = readb(eventbuf + 1);
- /*
- * The two assignments below get the current modem status
- * (mstat) and the previous modem status (lstat). These are
- * useful becuase an event could signal a change in modem
- * signals itself.
- */
- mstat = readb(eventbuf + 2);
- lstat = readb(eventbuf + 3);
-
- ch = chan0 + channel;
- if ((unsigned)channel >= bd->numports || !ch) {
- if (channel >= bd->numports)
- ch = chan0;
- bc = ch->brdchan;
- goto next;
- }
-
- bc = ch->brdchan;
- if (bc == NULL)
- goto next;
-
- tty = tty_port_tty_get(&ch->port);
- if (event & DATA_IND) { /* Begin DATA_IND */
- receive_data(ch, tty);
- assertgwinon(ch);
- } /* End DATA_IND */
- /* else *//* Fix for DCD transition missed bug */
- if (event & MODEMCHG_IND) {
- /* A modem signal change has been indicated */
- ch->imodem = mstat;
- if (test_bit(ASYNCB_CHECK_CD, &ch->port.flags)) {
- /* We are now receiving dcd */
- if (mstat & ch->dcd)
- wake_up_interruptible(&ch->port.open_wait);
- else /* No dcd; hangup */
- pc_sched_event(ch, EPCA_EVENT_HANGUP);
- }
- }
- if (tty) {
- if (event & BREAK_IND) {
- /* A break has been indicated */
- tty_insert_flip_char(tty, 0, TTY_BREAK);
- tty_schedule_flip(tty);
- } else if (event & LOWTX_IND) {
- if (ch->statusflags & LOWWAIT) {
- ch->statusflags &= ~LOWWAIT;
- tty_wakeup(tty);
- }
- } else if (event & EMPTYTX_IND) {
- /* This event is generated by
- setup_empty_event */
- ch->statusflags &= ~TXBUSY;
- if (ch->statusflags & EMPTYWAIT) {
- ch->statusflags &= ~EMPTYWAIT;
- tty_wakeup(tty);
- }
- }
- tty_kref_put(tty);
- }
-next:
- globalwinon(ch);
- BUG_ON(!bc);
- writew(1, &bc->idata);
- writew((tail + 4) & (IMAX - ISTART - 4), &chan0->mailbox->eout);
- globalwinon(chan0);
- } /* End while something in event queue */
-}
-
-static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
- int byte2, int ncmds, int bytecmd)
-{
- unchar __iomem *memaddr;
- unsigned int head, cmdTail, cmdStart, cmdMax;
- long count;
- int n;
-
- /* This is the routine in which commands may be passed to the card. */
-
- if (ch->board->status == DISABLED)
- return;
- assertgwinon(ch);
- /* Remember head (As well as max) is just an offset not a base addr */
- head = readw(&ch->mailbox->cin);
- /* cmdStart is a base address */
- cmdStart = readw(&ch->mailbox->cstart);
- /*
- * We do the addition below because we do not want a max pointer
- * relative to cmdStart. We want a max pointer that points at the
- * physical end of the command queue.
- */
- cmdMax = (cmdStart + 4 + readw(&ch->mailbox->cmax));
- memaddr = ch->board->re_map_membase;
-
- if (head >= (cmdMax - cmdStart) || (head & 03)) {
- printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n",
- __LINE__, cmd, head);
- printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n",
- __LINE__, cmdMax, cmdStart);
- return;
- }
- if (bytecmd) {
- writeb(cmd, memaddr + head + cmdStart + 0);
- writeb(ch->channelnum, memaddr + head + cmdStart + 1);
- /* Below word_or_byte is bits to set */
- writeb(word_or_byte, memaddr + head + cmdStart + 2);
- /* Below byte2 is bits to reset */
- writeb(byte2, memaddr + head + cmdStart + 3);
- } else {
- writeb(cmd, memaddr + head + cmdStart + 0);
- writeb(ch->channelnum, memaddr + head + cmdStart + 1);
- writeb(word_or_byte, memaddr + head + cmdStart + 2);
- }
- head = (head + 4) & (cmdMax - cmdStart - 4);
- writew(head, &ch->mailbox->cin);
- count = FEPTIMEOUT;
-
- for (;;) {
- count--;
- if (count == 0) {
- printk(KERN_ERR "<Error> - Fep not responding in fepcmd()\n");
- return;
- }
- head = readw(&ch->mailbox->cin);
- cmdTail = readw(&ch->mailbox->cout);
- n = (head - cmdTail) & (cmdMax - cmdStart - 4);
- /*
- * Basically this will break when the FEP acknowledges the
- * command by incrementing cmdTail (Making it equal to head).
- */
- if (n <= ncmds * (sizeof(short) * 4))
- break;
- }
-}
-
-/*
- * Digi products use fields in their channels structures that are very similar
- * to the c_cflag and c_iflag fields typically found in UNIX termios
- * structures. The below three routines allow mappings between these hardware
- * "flags" and their respective Linux flags.
- */
-static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
-{
- unsigned res = 0;
-
- if (cflag & CRTSCTS) {
- ch->digiext.digi_flags |= (RTSPACE | CTSPACE);
- res |= ((ch->m_cts) | (ch->m_rts));
- }
-
- if (ch->digiext.digi_flags & RTSPACE)
- res |= ch->m_rts;
-
- if (ch->digiext.digi_flags & DTRPACE)
- res |= ch->m_dtr;
-
- if (ch->digiext.digi_flags & CTSPACE)
- res |= ch->m_cts;
-
- if (ch->digiext.digi_flags & DSRPACE)
- res |= ch->dsr;
-
- if (ch->digiext.digi_flags & DCDPACE)
- res |= ch->dcd;
-
- if (res & (ch->m_rts))
- ch->digiext.digi_flags |= RTSPACE;
-
- if (res & (ch->m_cts))
- ch->digiext.digi_flags |= CTSPACE;
-
- return res;
-}
-
-static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
-{
- unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
- INPCK | ISTRIP | IXON | IXANY | IXOFF);
- if (ch->digiext.digi_flags & DIGI_AIXON)
- res |= IAIXON;
- return res;
-}
-
-static unsigned termios2digi_c(struct channel *ch, unsigned cflag)
-{
- unsigned res = 0;
- if (cflag & CBAUDEX) {
- ch->digiext.digi_flags |= DIGI_FAST;
- /*
- * HUPCL bit is used by FEP to indicate fast baud table is to
- * be used.
- */
- res |= FEP_HUPCL;
- } else
- ch->digiext.digi_flags &= ~DIGI_FAST;
- /*
- * CBAUD has bit position 0x1000 set these days to indicate Linux
- * baud rate remap. Digi hardware can't handle the bit assignment.
- * (We use a different bit assignment for high speed.). Clear this
- * bit out.
- */
- res |= cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | CSTOPB | CSIZE);
- /*
- * This gets a little confusing. The Digi cards have their own
- * representation of c_cflags controlling baud rate. For the most part
- * this is identical to the Linux implementation. However; Digi
- * supports one rate (76800) that Linux doesn't. This means that the
- * c_cflag entry that would normally mean 76800 for Digi actually means
- * 115200 under Linux. Without the below mapping, a stty 115200 would
- * only drive the board at 76800. Since the rate 230400 is also found
- * after 76800, the same problem afflicts us when we choose a rate of
- * 230400. Without the below modificiation stty 230400 would actually
- * give us 115200.
- *
- * There are two additional differences. The Linux value for CLOCAL
- * (0x800; 0004000) has no meaning to the Digi hardware. Also in later
- * releases of Linux; the CBAUD define has CBAUDEX (0x1000; 0010000)
- * ored into it (CBAUD = 0x100f as opposed to 0xf). CBAUDEX should be
- * checked for a screened out prior to termios2digi_c returning. Since
- * CLOCAL isn't used by the board this can be ignored as long as the
- * returned value is used only by Digi hardware.
- */
- if (cflag & CBAUDEX) {
- /*
- * The below code is trying to guarantee that only baud rates
- * 115200 and 230400 are remapped. We use exclusive or because
- * the various baud rates share common bit positions and
- * therefore can't be tested for easily.
- */
- if ((!((cflag & 0x7) ^ (B115200 & ~CBAUDEX))) ||
- (!((cflag & 0x7) ^ (B230400 & ~CBAUDEX))))
- res += 1;
- }
- return res;
-}
-
-/* Caller must hold the locks */
-static void epcaparam(struct tty_struct *tty, struct channel *ch)
-{
- unsigned int cmdHead;
- struct ktermios *ts;
- struct board_chan __iomem *bc;
- unsigned mval, hflow, cflag, iflag;
-
- bc = ch->brdchan;
- epcaassert(bc != NULL, "bc out of range");
-
- assertgwinon(ch);
- ts = tty->termios;
- if ((ts->c_cflag & CBAUD) == 0) { /* Begin CBAUD detected */
- cmdHead = readw(&bc->rin);
- writew(cmdHead, &bc->rout);
- cmdHead = readw(&bc->tin);
- /* Changing baud in mid-stream transmission can be wonderful */
- /*
- * Flush current transmit buffer by setting cmdTail pointer
- * (tout) to cmdHead pointer (tin). Hopefully the transmit
- * buffer is empty.
- */
- fepcmd(ch, STOUT, (unsigned) cmdHead, 0, 0, 0);
- mval = 0;
- } else { /* Begin CBAUD not detected */
- /*
- * c_cflags have changed but that change had nothing to do with
- * BAUD. Propagate the change to the card.
- */
- cflag = termios2digi_c(ch, ts->c_cflag);
- if (cflag != ch->fepcflag) {
- ch->fepcflag = cflag;
- /* Set baud rate, char size, stop bits, parity */
- fepcmd(ch, SETCTRLFLAGS, (unsigned) cflag, 0, 0, 0);
- }
- /*
- * If the user has not forced CLOCAL and if the device is not a
- * CALLOUT device (Which is always CLOCAL) we set flags such
- * that the driver will wait on carrier detect.
- */
- if (ts->c_cflag & CLOCAL)
- clear_bit(ASYNCB_CHECK_CD, &ch->port.flags);
- else
- set_bit(ASYNCB_CHECK_CD, &ch->port.flags);
- mval = ch->m_dtr | ch->m_rts;
- } /* End CBAUD not detected */
- iflag = termios2digi_i(ch, ts->c_iflag);
- /* Check input mode flags */
- if (iflag != ch->fepiflag) {
- ch->fepiflag = iflag;
- /*
- * Command sets channels iflag structure on the board. Such
- * things as input soft flow control, handling of parity
- * errors, and break handling are all set here.
- *
- * break handling, parity handling, input stripping,
- * flow control chars
- */
- fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
- }
- /*
- * Set the board mint value for this channel. This will cause hardware
- * events to be generated each time the DCD signal (Described in mint)
- * changes.
- */
- writeb(ch->dcd, &bc->mint);
- if ((ts->c_cflag & CLOCAL) || (ch->digiext.digi_flags & DIGI_FORCEDCD))
- if (ch->digiext.digi_flags & DIGI_FORCEDCD)
- writeb(0, &bc->mint);
- ch->imodem = readb(&bc->mstat);
- hflow = termios2digi_h(ch, ts->c_cflag);
- if (hflow != ch->hflow) {
- ch->hflow = hflow;
- /*
- * Hard flow control has been selected but the board is not
- * using it. Activate hard flow control now.
- */
- fepcmd(ch, SETHFLOW, hflow, 0xff, 0, 1);
- }
- mval ^= ch->modemfake & (mval ^ ch->modem);
-
- if (ch->omodem ^ mval) {
- ch->omodem = mval;
- /*
- * The below command sets the DTR and RTS mstat structure. If
- * hard flow control is NOT active these changes will drive the
- * output of the actual DTR and RTS lines. If hard flow control
- * is active, the changes will be saved in the mstat structure
- * and only asserted when hard flow control is turned off.
- */
-
- /* First reset DTR & RTS; then set them */
- fepcmd(ch, SETMODEM, 0, ((ch->m_dtr)|(ch->m_rts)), 0, 1);
- fepcmd(ch, SETMODEM, mval, 0, 0, 1);
- }
- if (ch->startc != ch->fepstartc || ch->stopc != ch->fepstopc) {
- ch->fepstartc = ch->startc;
- ch->fepstopc = ch->stopc;
- /*
- * The XON / XOFF characters have changed; propagate these
- * changes to the card.
- */
- fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
- }
- if (ch->startca != ch->fepstartca || ch->stopca != ch->fepstopca) {
- ch->fepstartca = ch->startca;
- ch->fepstopca = ch->stopca;
- /*
- * Similar to the above, this time the auxilarly XON / XOFF
- * characters have changed; propagate these changes to the card.
- */
- fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
- }
-}
-
-/* Caller holds lock */
-static void receive_data(struct channel *ch, struct tty_struct *tty)
-{
- unchar *rptr;
- struct ktermios *ts = NULL;
- struct board_chan __iomem *bc;
- int dataToRead, wrapgap, bytesAvailable;
- unsigned int tail, head;
- unsigned int wrapmask;
-
- /*
- * This routine is called by doint when a receive data event has taken
- * place.
- */
- globalwinon(ch);
- if (ch->statusflags & RXSTOPPED)
- return;
- if (tty)
- ts = tty->termios;
- bc = ch->brdchan;
- BUG_ON(!bc);
- wrapmask = ch->rxbufsize - 1;
-
- /*
- * Get the head and tail pointers to the receiver queue. Wrap the head
- * pointer if it has reached the end of the buffer.
- */
- head = readw(&bc->rin);
- head &= wrapmask;
- tail = readw(&bc->rout) & wrapmask;
-
- bytesAvailable = (head - tail) & wrapmask;
- if (bytesAvailable == 0)
- return;
-
- /* If CREAD bit is off or device not open, set TX tail to head */
- if (!tty || !ts || !(ts->c_cflag & CREAD)) {
- writew(head, &bc->rout);
- return;
- }
-
- if (tty_buffer_request_room(tty, bytesAvailable + 1) == 0)
- return;
-
- if (readb(&bc->orun)) {
- writeb(0, &bc->orun);
- printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",
- tty->name);
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- rxwinon(ch);
- while (bytesAvailable > 0) {
- /* Begin while there is data on the card */
- wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
- /*
- * Even if head has wrapped around only report the amount of
- * data to be equal to the size - tail. Remember memcpy can't
- * automaticly wrap around the receive buffer.
- */
- dataToRead = (wrapgap < bytesAvailable) ? wrapgap
- : bytesAvailable;
- /* Make sure we don't overflow the buffer */
- dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
- if (dataToRead == 0)
- break;
- /*
- * Move data read from our card into the line disciplines
- * buffer for translation if necessary.
- */
- memcpy_fromio(rptr, ch->rxptr + tail, dataToRead);
- tail = (tail + dataToRead) & wrapmask;
- bytesAvailable -= dataToRead;
- } /* End while there is data on the card */
- globalwinon(ch);
- writew(tail, &bc->rout);
- /* Must be called with global data */
- tty_schedule_flip(tty);
-}
-
-static int info_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case DIGI_GETINFO:
- {
- struct digi_info di;
- int brd;
-
- if (get_user(brd, (unsigned int __user *)arg))
- return -EFAULT;
- if (brd < 0 || brd >= num_cards || num_cards == 0)
- return -ENODEV;
-
- memset(&di, 0, sizeof(di));
-
- di.board = brd;
- di.status = boards[brd].status;
- di.type = boards[brd].type ;
- di.numports = boards[brd].numports ;
- /* Legacy fixups - just move along nothing to see */
- di.port = (unsigned char *)boards[brd].port ;
- di.membase = (unsigned char *)boards[brd].membase ;
-
- if (copy_to_user((void __user *)arg, &di, sizeof(di)))
- return -EFAULT;
- break;
-
- }
-
- case DIGI_POLLER:
- {
- int brd = arg & 0xff000000 >> 16;
- unsigned char state = arg & 0xff;
-
- if (brd < 0 || brd >= num_cards) {
- printk(KERN_ERR "epca: DIGI POLLER : brd not valid!\n");
- return -ENODEV;
- }
- digi_poller_inhibited = state;
- break;
- }
-
- case DIGI_INIT:
- {
- /*
- * This call is made by the apps to complete the
- * initialization of the board(s). This routine is
- * responsible for setting the card to its initial
- * state and setting the drivers control fields to the
- * sutianle settings for the card in question.
- */
- int crd;
- for (crd = 0; crd < num_cards; crd++)
- post_fep_init(crd);
- break;
- }
- default:
- return -ENOTTY;
- }
- return 0;
-}
-
-static int pc_tiocmget(struct tty_struct *tty)
-{
- struct channel *ch = tty->driver_data;
- struct board_chan __iomem *bc;
- unsigned int mstat, mflag = 0;
- unsigned long flags;
-
- if (ch)
- bc = ch->brdchan;
- else
- return -EINVAL;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- mstat = readb(&bc->mstat);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (mstat & ch->m_dtr)
- mflag |= TIOCM_DTR;
- if (mstat & ch->m_rts)
- mflag |= TIOCM_RTS;
- if (mstat & ch->m_cts)
- mflag |= TIOCM_CTS;
- if (mstat & ch->dsr)
- mflag |= TIOCM_DSR;
- if (mstat & ch->m_ri)
- mflag |= TIOCM_RI;
- if (mstat & ch->dcd)
- mflag |= TIOCM_CD;
- return mflag;
-}
-
-static int pc_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct channel *ch = tty->driver_data;
- unsigned long flags;
-
- if (!ch)
- return -EINVAL;
-
- spin_lock_irqsave(&epca_lock, flags);
- /*
- * I think this modemfake stuff is broken. It doesn't correctly reflect
- * the behaviour desired by the TIOCM* ioctls. Therefore this is
- * probably broken.
- */
- if (set & TIOCM_RTS) {
- ch->modemfake |= ch->m_rts;
- ch->modem |= ch->m_rts;
- }
- if (set & TIOCM_DTR) {
- ch->modemfake |= ch->m_dtr;
- ch->modem |= ch->m_dtr;
- }
- if (clear & TIOCM_RTS) {
- ch->modemfake |= ch->m_rts;
- ch->modem &= ~ch->m_rts;
- }
- if (clear & TIOCM_DTR) {
- ch->modemfake |= ch->m_dtr;
- ch->modem &= ~ch->m_dtr;
- }
- globalwinon(ch);
- /*
- * The below routine generally sets up parity, baud, flow control
- * issues, etc.... It effect both control flags and input flags.
- */
- epcaparam(tty, ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return 0;
-}
-
-static int pc_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- digiflow_t dflow;
- unsigned long flags;
- unsigned int mflag, mstat;
- unsigned char startc, stopc;
- struct board_chan __iomem *bc;
- struct channel *ch = tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- if (ch)
- bc = ch->brdchan;
- else
- return -EINVAL;
- switch (cmd) {
- case TIOCMODG:
- mflag = pc_tiocmget(tty);
- if (put_user(mflag, (unsigned long __user *)argp))
- return -EFAULT;
- break;
- case TIOCMODS:
- if (get_user(mstat, (unsigned __user *)argp))
- return -EFAULT;
- return pc_tiocmset(tty, mstat, ~mstat);
- case TIOCSDTR:
- spin_lock_irqsave(&epca_lock, flags);
- ch->omodem |= ch->m_dtr;
- globalwinon(ch);
- fepcmd(ch, SETMODEM, ch->m_dtr, 0, 10, 1);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
-
- case TIOCCDTR:
- spin_lock_irqsave(&epca_lock, flags);
- ch->omodem &= ~ch->m_dtr;
- globalwinon(ch);
- fepcmd(ch, SETMODEM, 0, ch->m_dtr, 10, 1);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
- case DIGI_GETA:
- if (copy_to_user(argp, &ch->digiext, sizeof(digi_t)))
- return -EFAULT;
- break;
- case DIGI_SETAW:
- case DIGI_SETAF:
- if (cmd == DIGI_SETAW) {
- /* Setup an event to indicate when the transmit
- buffer empties */
- spin_lock_irqsave(&epca_lock, flags);
- setup_empty_event(tty, ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- tty_wait_until_sent(tty, 0);
- } else {
- /* ldisc lock already held in ioctl */
- if (tty->ldisc->ops->flush_buffer)
- tty->ldisc->ops->flush_buffer(tty);
- }
- /* Fall Thru */
- case DIGI_SETA:
- if (copy_from_user(&ch->digiext, argp, sizeof(digi_t)))
- return -EFAULT;
-
- if (ch->digiext.digi_flags & DIGI_ALTPIN) {
- ch->dcd = ch->m_dsr;
- ch->dsr = ch->m_dcd;
- } else {
- ch->dcd = ch->m_dcd;
- ch->dsr = ch->m_dsr;
- }
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- /*
- * The below routine generally sets up parity, baud, flow
- * control issues, etc.... It effect both control flags and
- * input flags.
- */
- epcaparam(tty, ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- break;
-
- case DIGI_GETFLOW:
- case DIGI_GETAFLOW:
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- if (cmd == DIGI_GETFLOW) {
- dflow.startc = readb(&bc->startc);
- dflow.stopc = readb(&bc->stopc);
- } else {
- dflow.startc = readb(&bc->startca);
- dflow.stopc = readb(&bc->stopca);
- }
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if (copy_to_user(argp, &dflow, sizeof(dflow)))
- return -EFAULT;
- break;
-
- case DIGI_SETAFLOW:
- case DIGI_SETFLOW:
- if (cmd == DIGI_SETFLOW) {
- startc = ch->startc;
- stopc = ch->stopc;
- } else {
- startc = ch->startca;
- stopc = ch->stopca;
- }
-
- if (copy_from_user(&dflow, argp, sizeof(dflow)))
- return -EFAULT;
-
- if (dflow.startc != startc || dflow.stopc != stopc) {
- /* Begin if setflow toggled */
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
-
- if (cmd == DIGI_SETFLOW) {
- ch->fepstartc = ch->startc = dflow.startc;
- ch->fepstopc = ch->stopc = dflow.stopc;
- fepcmd(ch, SONOFFC, ch->fepstartc,
- ch->fepstopc, 0, 1);
- } else {
- ch->fepstartca = ch->startca = dflow.startc;
- ch->fepstopca = ch->stopca = dflow.stopc;
- fepcmd(ch, SAUXONOFFC, ch->fepstartca,
- ch->fepstopca, 0, 1);
- }
-
- if (ch->statusflags & TXSTOPPED)
- pc_start(tty);
-
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- } /* End if setflow toggled */
- break;
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
-
- if (ch != NULL) { /* Begin if channel valid */
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- epcaparam(tty, ch);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- ((tty->termios->c_cflag & CRTSCTS) == 0))
- tty->hw_stopped = 0;
-
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&ch->port.open_wait);
-
- } /* End if channel valid */
-}
-
-static void do_softint(struct work_struct *work)
-{
- struct channel *ch = container_of(work, struct channel, tqueue);
- /* Called in response to a modem change event */
- if (ch && ch->magic == EPCA_MAGIC) {
- struct tty_struct *tty = tty_port_tty_get(&ch->port);
-
- if (tty && tty->driver_data) {
- if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
- tty_hangup(tty);
- wake_up_interruptible(&ch->port.open_wait);
- clear_bit(ASYNCB_NORMAL_ACTIVE,
- &ch->port.flags);
- }
- }
- tty_kref_put(tty);
- }
-}
-
-/*
- * pc_stop and pc_start provide software flow control to the routine and the
- * pc_ioctl routine.
- */
-static void pc_stop(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- if ((ch->statusflags & TXSTOPPED) == 0) {
- /* Begin if transmit stop requested */
- globalwinon(ch);
- /* STOP transmitting now !! */
- fepcmd(ch, PAUSETX, 0, 0, 0, 0);
- ch->statusflags |= TXSTOPPED;
- memoff(ch);
- } /* End if transmit stop requested */
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static void pc_start(struct tty_struct *tty)
-{
- struct channel *ch;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- unsigned long flags;
- spin_lock_irqsave(&epca_lock, flags);
- /* Just in case output was resumed because of a change
- in Digi-flow */
- if (ch->statusflags & TXSTOPPED) {
- /* Begin transmit resume requested */
- struct board_chan __iomem *bc;
- globalwinon(ch);
- bc = ch->brdchan;
- if (ch->statusflags & LOWWAIT)
- writeb(1, &bc->ilow);
- /* Okay, you can start transmitting again... */
- fepcmd(ch, RESUMETX, 0, 0, 0, 0);
- ch->statusflags &= ~TXSTOPPED;
- memoff(ch);
- } /* End transmit resume requested */
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-/*
- * The below routines pc_throttle and pc_unthrottle are used to slow (And
- * resume) the receipt of data into the kernels receive buffers. The exact
- * occurrence of this depends on the size of the kernels receive buffer and
- * what the 'watermarks' are set to for that buffer. See the n_ttys.c file for
- * more details.
- */
-static void pc_throttle(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- spin_lock_irqsave(&epca_lock, flags);
- if ((ch->statusflags & RXSTOPPED) == 0) {
- globalwinon(ch);
- fepcmd(ch, PAUSERX, 0, 0, 0, 0);
- ch->statusflags |= RXSTOPPED;
- memoff(ch);
- }
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static void pc_unthrottle(struct tty_struct *tty)
-{
- struct channel *ch;
- unsigned long flags;
- /*
- * verifyChannel returns the channel from the tty struct if it is
- * valid. This serves as a sanity check.
- */
- ch = verifyChannel(tty);
- if (ch != NULL) {
- /* Just in case output was resumed because of a change
- in Digi-flow */
- spin_lock_irqsave(&epca_lock, flags);
- if (ch->statusflags & RXSTOPPED) {
- globalwinon(ch);
- fepcmd(ch, RESUMERX, 0, 0, 0, 0);
- ch->statusflags &= ~RXSTOPPED;
- memoff(ch);
- }
- spin_unlock_irqrestore(&epca_lock, flags);
- }
-}
-
-static int pc_send_break(struct tty_struct *tty, int msec)
-{
- struct channel *ch = tty->driver_data;
- unsigned long flags;
-
- if (msec == -1)
- msec = 0xFFFF;
- else if (msec > 0xFFFE)
- msec = 0xFFFE;
- else if (msec < 1)
- msec = 1;
-
- spin_lock_irqsave(&epca_lock, flags);
- globalwinon(ch);
- /*
- * Maybe I should send an infinite break here, schedule() for msec
- * amount of time, and then stop the break. This way, the user can't
- * screw up the FEP by causing digi_send_break() to be called (i.e. via
- * an ioctl()) more than once in msec amount of time.
- * Try this for now...
- */
- fepcmd(ch, SENDBREAK, msec, 0, 10, 0);
- memoff(ch);
- spin_unlock_irqrestore(&epca_lock, flags);
- return 0;
-}
-
-/* Caller MUST hold the lock */
-static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
-{
- struct board_chan __iomem *bc = ch->brdchan;
-
- globalwinon(ch);
- ch->statusflags |= EMPTYWAIT;
- /*
- * When set the iempty flag request a event to be generated when the
- * transmit buffer is empty (If there is no BREAK in progress).
- */
- writeb(1, &bc->iempty);
- memoff(ch);
-}
-
-#ifndef MODULE
-static void __init epca_setup(char *str, int *ints)
-{
- struct board_info board;
- int index, loop, last;
- char *temp, *t2;
- unsigned len;
-
- /*
- * If this routine looks a little strange it is because it is only
- * called if a LILO append command is given to boot the kernel with
- * parameters. In this way, we can provide the user a method of
- * changing his board configuration without rebuilding the kernel.
- */
- if (!liloconfig)
- liloconfig = 1;
-
- memset(&board, 0, sizeof(board));
-
- /* Assume the data is int first, later we can change it */
- /* I think that array position 0 of ints holds the number of args */
- for (last = 0, index = 1; index <= ints[0]; index++)
- switch (index) { /* Begin parse switch */
- case 1:
- board.status = ints[index];
- /*
- * We check for 2 (As opposed to 1; because 2 is a flag
- * instructing the driver to ignore epcaconfig.) For
- * this reason we check for 2.
- */
- if (board.status == 2) {
- /* Begin ignore epcaconfig as well as lilo cmd line */
- nbdevs = 0;
- num_cards = 0;
- return;
- } /* End ignore epcaconfig as well as lilo cmd line */
-
- if (board.status > 2) {
- printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n",
- board.status);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_STATUS;
- return;
- }
- last = index;
- break;
- case 2:
- board.type = ints[index];
- if (board.type >= PCIXEM) {
- printk(KERN_ERR "epca_setup: Invalid board type 0x%x\n", board.type);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_TYPE;
- return;
- }
- last = index;
- break;
- case 3:
- board.altpin = ints[index];
- if (board.altpin > 1) {
- printk(KERN_ERR "epca_setup: Invalid board altpin 0x%x\n", board.altpin);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_ALTPIN;
- return;
- }
- last = index;
- break;
-
- case 4:
- board.numports = ints[index];
- if (board.numports < 2 || board.numports > 256) {
- printk(KERN_ERR "epca_setup: Invalid board numports 0x%x\n", board.numports);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_NUM_PORTS;
- return;
- }
- nbdevs += board.numports;
- last = index;
- break;
-
- case 5:
- board.port = ints[index];
- if (ints[index] <= 0) {
- printk(KERN_ERR "epca_setup: Invalid io port 0x%x\n", (unsigned int)board.port);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_PORT_BASE;
- return;
- }
- last = index;
- break;
-
- case 6:
- board.membase = ints[index];
- if (ints[index] <= 0) {
- printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",
- (unsigned int)board.membase);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_MEM_BASE;
- return;
- }
- last = index;
- break;
-
- default:
- printk(KERN_ERR "<Error> - epca_setup: Too many integer parms\n");
- return;
-
- } /* End parse switch */
-
- while (str && *str) { /* Begin while there is a string arg */
- /* find the next comma or terminator */
- temp = str;
- /* While string is not null, and a comma hasn't been found */
- while (*temp && (*temp != ','))
- temp++;
- if (!*temp)
- temp = NULL;
- else
- *temp++ = 0;
- /* Set index to the number of args + 1 */
- index = last + 1;
-
- switch (index) {
- case 1:
- len = strlen(str);
- if (strncmp("Disable", str, len) == 0)
- board.status = 0;
- else if (strncmp("Enable", str, len) == 0)
- board.status = 1;
- else {
- printk(KERN_ERR "epca_setup: Invalid status %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_STATUS;
- return;
- }
- last = index;
- break;
-
- case 2:
- for (loop = 0; loop < EPCA_NUM_TYPES; loop++)
- if (strcmp(board_desc[loop], str) == 0)
- break;
- /*
- * If the index incremented above refers to a
- * legitamate board type set it here.
- */
- if (index < EPCA_NUM_TYPES)
- board.type = loop;
- else {
- printk(KERN_ERR "epca_setup: Invalid board type: %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_BOARD_TYPE;
- return;
- }
- last = index;
- break;
-
- case 3:
- len = strlen(str);
- if (strncmp("Disable", str, len) == 0)
- board.altpin = 0;
- else if (strncmp("Enable", str, len) == 0)
- board.altpin = 1;
- else {
- printk(KERN_ERR "epca_setup: Invalid altpin %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_ALTPIN;
- return;
- }
- last = index;
- break;
-
- case 4:
- t2 = str;
- while (isdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid port count %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_NUM_PORTS;
- return;
- }
-
- /*
- * There is not a man page for simple_strtoul but the
- * code can be found in vsprintf.c. The first argument
- * is the string to translate (To an unsigned long
- * obviously), the second argument can be the address
- * of any character variable or a NULL. If a variable
- * is given, the end pointer of the string will be
- * stored in that variable; if a NULL is given the end
- * pointer will not be returned. The last argument is
- * the base to use. If a 0 is indicated, the routine
- * will attempt to determine the proper base by looking
- * at the values prefix (A '0' for octal, a 'x' for
- * hex, etc ... If a value is given it will use that
- * value as the base.
- */
- board.numports = simple_strtoul(str, NULL, 0);
- nbdevs += board.numports;
- last = index;
- break;
-
- case 5:
- t2 = str;
- while (isxdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid i/o address %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_PORT_BASE;
- return;
- }
-
- board.port = simple_strtoul(str, NULL, 16);
- last = index;
- break;
-
- case 6:
- t2 = str;
- while (isxdigit(*t2))
- t2++;
-
- if (*t2) {
- printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str);
- invalid_lilo_config = 1;
- setup_error_code |= INVALID_MEM_BASE;
- return;
- }
- board.membase = simple_strtoul(str, NULL, 16);
- last = index;
- break;
- default:
- printk(KERN_ERR "epca: Too many string parms\n");
- return;
- }
- str = temp;
- } /* End while there is a string arg */
-
- if (last < 6) {
- printk(KERN_ERR "epca: Insufficient parms specified\n");
- return;
- }
-
- /* I should REALLY validate the stuff here */
- /* Copies our local copy of board into boards */
- memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board));
- /* Does this get called once per lilo arg are what ? */
- printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
- num_cards, board_desc[board.type],
- board.numports, (int)board.port, (unsigned int) board.membase);
- num_cards++;
-}
-
-static int __init epca_real_setup(char *str)
-{
- int ints[11];
-
- epca_setup(get_options(str, 11, ints), ints);
- return 1;
-}
-
-__setup("digiepca", epca_real_setup);
-#endif
-
-enum epic_board_types {
- brd_xr = 0,
- brd_xem,
- brd_cx,
- brd_xrj,
-};
-
-/* indexed directly by epic_board_types enum */
-static struct {
- unsigned char board_type;
- unsigned bar_idx; /* PCI base address region */
-} epca_info_tbl[] = {
- { PCIXR, 0, },
- { PCIXEM, 0, },
- { PCICX, 0, },
- { PCIXRJ, 2, },
-};
-
-static int __devinit epca_init_one(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- static int board_num = -1;
- int board_idx, info_idx = ent->driver_data;
- unsigned long addr;
-
- if (pci_enable_device(pdev))
- return -EIO;
-
- board_num++;
- board_idx = board_num + num_cards;
- if (board_idx >= MAXBOARDS)
- goto err_out;
-
- addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx);
- if (!addr) {
- printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n",
- epca_info_tbl[info_idx].bar_idx);
- goto err_out;
- }
-
- boards[board_idx].status = ENABLED;
- boards[board_idx].type = epca_info_tbl[info_idx].board_type;
- boards[board_idx].numports = 0x0;
- boards[board_idx].port = addr + PCI_IO_OFFSET;
- boards[board_idx].membase = addr;
-
- if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) {
- printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out;
- }
-
- boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET,
- 0x200000);
- if (!boards[board_idx].re_map_port) {
- printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out_free_pciio;
- }
-
- if (!request_mem_region(addr, 0x200000, "epca")) {
- printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
- 0x200000, addr);
- goto err_out_free_iounmap;
- }
-
- boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000);
- if (!boards[board_idx].re_map_membase) {
- printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
- 0x200000, addr + PCI_IO_OFFSET);
- goto err_out_free_memregion;
- }
-
- /*
- * I don't know what the below does, but the hardware guys say its
- * required on everything except PLX (In this case XRJ).
- */
- if (info_idx != brd_xrj) {
- pci_write_config_byte(pdev, 0x40, 0);
- pci_write_config_byte(pdev, 0x46, 0);
- }
-
- return 0;
-
-err_out_free_memregion:
- release_mem_region(addr, 0x200000);
-err_out_free_iounmap:
- iounmap(boards[board_idx].re_map_port);
-err_out_free_pciio:
- release_mem_region(addr + PCI_IO_OFFSET, 0x200000);
-err_out:
- return -ENODEV;
-}
-
-
-static struct pci_device_id epca_pci_tbl[] = {
- { PCI_VENDOR_DIGI, PCI_DEVICE_XR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xr },
- { PCI_VENDOR_DIGI, PCI_DEVICE_XEM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xem },
- { PCI_VENDOR_DIGI, PCI_DEVICE_CX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_cx },
- { PCI_VENDOR_DIGI, PCI_DEVICE_XRJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, brd_xrj },
- { 0, }
-};
-
-MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
-
-static int __init init_PCI(void)
-{
- memset(&epca_driver, 0, sizeof(epca_driver));
- epca_driver.name = "epca";
- epca_driver.id_table = epca_pci_tbl;
- epca_driver.probe = epca_init_one;
-
- return pci_register_driver(&epca_driver);
-}
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/epca.h b/drivers/char/epca.h
deleted file mode 100644
index d414bf2..0000000
--- a/drivers/char/epca.h
+++ /dev/null
@@ -1,158 +0,0 @@
-#define XEMPORTS 0xC02
-#define XEPORTS 0xC22
-
-#define MAX_ALLOC 0x100
-
-#define MAXBOARDS 12
-#define FEPCODESEG 0x0200L
-#define FEPCODE 0x2000L
-#define BIOSCODE 0xf800L
-
-#define MISCGLOBAL 0x0C00L
-#define NPORT 0x0C22L
-#define MBOX 0x0C40L
-#define PORTBASE 0x0C90L
-
-/* Begin code defines used for epca_setup */
-
-#define INVALID_BOARD_TYPE 0x1
-#define INVALID_NUM_PORTS 0x2
-#define INVALID_MEM_BASE 0x4
-#define INVALID_PORT_BASE 0x8
-#define INVALID_BOARD_STATUS 0x10
-#define INVALID_ALTPIN 0x20
-
-/* End code defines used for epca_setup */
-
-
-#define FEPCLR 0x00
-#define FEPMEM 0x02
-#define FEPRST 0x04
-#define FEPINT 0x08
-#define FEPMASK 0x0e
-#define FEPWIN 0x80
-
-#define PCXE 0
-#define PCXEVE 1
-#define PCXEM 2
-#define EISAXEM 3
-#define PC64XE 4
-#define PCXI 5
-#define PCIXEM 7
-#define PCICX 8
-#define PCIXR 9
-#define PCIXRJ 10
-#define EPCA_NUM_TYPES 6
-
-
-static char *board_desc[] =
-{
- "PC/Xe",
- "PC/Xeve",
- "PC/Xem",
- "EISA/Xem",
- "PC/64Xe",
- "PC/Xi",
- "unknown",
- "PCI/Xem",
- "PCI/CX",
- "PCI/Xr",
- "PCI/Xrj",
-};
-
-#define STARTC 021
-#define STOPC 023
-#define IAIXON 0x2000
-
-
-#define TXSTOPPED 0x1
-#define LOWWAIT 0x2
-#define EMPTYWAIT 0x4
-#define RXSTOPPED 0x8
-#define TXBUSY 0x10
-
-#define DISABLED 0
-#define ENABLED 1
-#define OFF 0
-#define ON 1
-
-#define FEPTIMEOUT 200000
-#define SERIAL_TYPE_INFO 3
-#define EPCA_EVENT_HANGUP 1
-#define EPCA_MAGIC 0x5c6df104L
-
-struct channel
-{
- long magic;
- struct tty_port port;
- unsigned char boardnum;
- unsigned char channelnum;
- unsigned char omodem; /* FEP output modem status */
- unsigned char imodem; /* FEP input modem status */
- unsigned char modemfake; /* Modem values to be forced */
- unsigned char modem; /* Force values */
- unsigned char hflow;
- unsigned char dsr;
- unsigned char dcd;
- unsigned char m_rts ; /* The bits used in whatever FEP */
- unsigned char m_dcd ; /* is indiginous to this board to */
- unsigned char m_dsr ; /* represent each of the physical */
- unsigned char m_cts ; /* handshake lines */
- unsigned char m_ri ;
- unsigned char m_dtr ;
- unsigned char stopc;
- unsigned char startc;
- unsigned char stopca;
- unsigned char startca;
- unsigned char fepstopc;
- unsigned char fepstartc;
- unsigned char fepstopca;
- unsigned char fepstartca;
- unsigned char txwin;
- unsigned char rxwin;
- unsigned short fepiflag;
- unsigned short fepcflag;
- unsigned short fepoflag;
- unsigned short txbufhead;
- unsigned short txbufsize;
- unsigned short rxbufhead;
- unsigned short rxbufsize;
- int close_delay;
- unsigned long event;
- uint dev;
- unsigned long statusflags;
- unsigned long c_iflag;
- unsigned long c_cflag;
- unsigned long c_lflag;
- unsigned long c_oflag;
- unsigned char __iomem *txptr;
- unsigned char __iomem *rxptr;
- struct board_info *board;
- struct board_chan __iomem *brdchan;
- struct digi_struct digiext;
- struct work_struct tqueue;
- struct global_data __iomem *mailbox;
-};
-
-struct board_info
-{
- unsigned char status;
- unsigned char type;
- unsigned char altpin;
- unsigned short numports;
- unsigned long port;
- unsigned long membase;
- void __iomem *re_map_port;
- void __iomem *re_map_membase;
- unsigned long memory_seg;
- void ( * memwinon ) (struct board_info *, unsigned int) ;
- void ( * memwinoff ) (struct board_info *, unsigned int) ;
- void ( * globalwinon ) (struct channel *) ;
- void ( * txwinon ) (struct channel *) ;
- void ( * rxwinon ) (struct channel *) ;
- void ( * memoff ) (struct channel *) ;
- void ( * assertgwinon ) (struct channel *) ;
- void ( * assertmemoff ) (struct channel *) ;
- unsigned char poller_inhibited ;
-};
-
diff --git a/drivers/char/epcaconfig.h b/drivers/char/epcaconfig.h
deleted file mode 100644
index 55dec06..0000000
--- a/drivers/char/epcaconfig.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#define NUMCARDS 0
-#define NBDEVS 0
-
-struct board_info static_boards[NUMCARDS]={
-};
-
-/* DO NOT HAND EDIT THIS FILE! */
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
deleted file mode 100644
index 7b78e0d..0000000
--- a/drivers/char/ip2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the Computone IntelliPort Plus Driver
-#
-
-obj-$(CONFIG_COMPUTONE) += ip2.o
-
-ip2-y := ip2main.o
-
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c
deleted file mode 100644
index e7af647..0000000
--- a/drivers/char/ip2/i2cmd.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Definition table for In-line and Bypass commands. Applicable
-* only when the standard loadware is active. (This is included
-* source code, not a separate compilation module.)
-*
-*******************************************************************************/
-
-//------------------------------------------------------------------------------
-//
-// Revision History:
-//
-// 10 October 1991 MAG First Draft
-// 7 November 1991 MAG Reflects additional commands.
-// 24 February 1992 MAG Additional commands for 1.4.x loadware
-// 11 March 1992 MAG Additional commands
-// 30 March 1992 MAG Additional command: CMD_DSS_NOW
-// 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a
-// packet: affects implementation.
-//------------------------------------------------------------------------------
-
-//************
-//* Includes *
-//************
-
-#include "i2cmd.h" /* To get some bit-defines */
-
-//------------------------------------------------------------------------------
-// Here is the table of global arrays which represent each type of command
-// supported in the IntelliPort standard loadware. See also i2cmd.h
-// for a more complete explanation of what is going on.
-//------------------------------------------------------------------------------
-
-// Here are the various globals: note that the names are not used except through
-// the macros defined in i2cmd.h. Also note that although they are character
-// arrays here (for extendability) they are cast to structure pointers in the
-// i2cmd.h macros. See i2cmd.h for flags definitions.
-
-// Length Flags Command
-static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP
-static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN
-static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP
-static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN
-static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL
-static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD
-static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS
-static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP
-static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY
-static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON
-static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF
-static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL
-static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK
-//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET
-static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS
-static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS
-static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB
-static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB
-static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB
-static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB
-static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB
-static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB
-static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB
-static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB
-static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB
-static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB
-//static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE
-//static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved
-static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB
-static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB
-static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB
-static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB
-static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE
-static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK
-static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE
-//static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE
-
-// The following is listed for completeness, but should never be sent directly
-// by user-level code. It is sent only by library routines in response to data
-// movement.
-//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET
-
-// Back to normal
-//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ
-//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON
-//static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF
-static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME
-//static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD
-//static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD
-//static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING
-//static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB
-//static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB
-//static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS
-//static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB
-//static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB
-//static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB
-//static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB
-//static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET
-//static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP
-static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1
-static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2
-static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE
-static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND
-static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND
-static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK
-static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ
-//static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP
-//static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT
-static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON
-static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF
-//static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS
-//static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT
-//static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL
-//static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL
-//static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF
-//static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB
-//static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB
-//static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB
-//static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB
-//static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL
-//static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA
-//static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON
-//static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF
-//static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC
-static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW
-//static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH
-//static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS
-//static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT
-//static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT
-//static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS
-//static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT
-//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE
-static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST
-//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD
-//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO
-//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break
-
-// Some composite commands as well
-//static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP
-//static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN
-
-//********
-//* Code *
-//********
-
-//******************************************************************************
-// Function: i2cmdUnixFlags(iflag, cflag, lflag)
-// Parameters: Unix tty flags
-//
-// Returns: Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of command 47 and returns a pointer to the
-// appropriate structure.
-//******************************************************************************
-#if 0
-cmdSyntaxPtr
-i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag)
-{
- cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47;
-
- pCM->cmd[1] = (unsigned char) iflag;
- pCM->cmd[2] = (unsigned char) (iflag >> 8);
- pCM->cmd[3] = (unsigned char) cflag;
- pCM->cmd[4] = (unsigned char) (cflag >> 8);
- pCM->cmd[5] = (unsigned char) lflag;
- pCM->cmd[6] = (unsigned char) (lflag >> 8);
- return pCM;
-}
-#endif /* 0 */
-
-//******************************************************************************
-// Function: i2cmdBaudDef(which, rate)
-// Parameters: ?
-//
-// Returns: Pointer to command structure
-//
-// Description:
-//
-// This routine sets the parameters of commands 54 or 55 (according to the
-// argument which), and returns a pointer to the appropriate structure.
-//******************************************************************************
-static cmdSyntaxPtr
-i2cmdBaudDef(int which, unsigned short rate)
-{
- cmdSyntaxPtr pCM;
-
- switch(which)
- {
- case 1:
- pCM = (cmdSyntaxPtr) ct54;
- break;
- default:
- case 2:
- pCM = (cmdSyntaxPtr) ct55;
- break;
- }
- pCM->cmd[1] = (unsigned char) rate;
- pCM->cmd[2] = (unsigned char) (rate >> 8);
- return pCM;
-}
-
diff --git a/drivers/char/ip2/i2cmd.h b/drivers/char/ip2/i2cmd.h
deleted file mode 100644
index 29277ec..0000000
--- a/drivers/char/ip2/i2cmd.h
+++ /dev/null
@@ -1,630 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Definitions and support for In-line and Bypass commands.
-* Applicable only when the standard loadware is active.
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 10 October 1991 MAG First Draft
-// 7 November 1991 MAG Reflects some new commands
-// 20 February 1992 MAG CMD_HOTACK corrected: no argument.
-// 24 February 1992 MAG Support added for new commands for 1.4.x loadware.
-// 11 March 1992 MAG Additional commands.
-// 16 March 1992 MAG Additional commands.
-// 30 March 1992 MAG Additional command: CMD_DSS_NOW
-// 18 May 1992 MAG Changed CMD_OPOST
-//
-//------------------------------------------------------------------------------
-#ifndef I2CMD_H // To prevent multiple includes
-#define I2CMD_H 1
-
-#include "ip2types.h"
-
-// This module is designed to provide a uniform method of sending commands to
-// the board through command packets. The difficulty is, some commands take
-// parameters, others do not. Furthermore, it is often useful to send several
-// commands to the same channel as part of the same packet. (See also i2pack.h.)
-//
-// This module is designed so that the caller should not be responsible for
-// remembering the exact syntax of each command, or at least so that the
-// compiler could check things somewhat. I'll explain as we go...
-//
-// First, a structure which can embody the syntax of each type of command.
-//
-typedef struct _cmdSyntax
-{
- UCHAR length; // Number of bytes in the command
- UCHAR flags; // Information about the command (see below)
-
- // The command and its parameters, which may be of arbitrary length. Don't
- // worry yet how the parameters will be initialized; macros later take care
- // of it. Also, don't worry about the arbitrary length issue; this structure
- // is never used to allocate space (see i2cmd.c).
- UCHAR cmd[2];
-} cmdSyntax, *cmdSyntaxPtr;
-
-// Bit assignments for flags
-
-#define INL 1 // Set if suitable for inline commands
-#define BYP 2 // Set if suitable for bypass commands
-#define BTH (INL|BYP) // suitable for either!
-#define END 4 // Set if this must be the last command in a block
-#define VIP 8 // Set if this command is special in some way and really
- // should only be sent from the library-level and not
- // directly from user-level
-#define VAR 0x10 // This command is of variable length!
-
-// Declarations for the global arrays used to bear the commands and their
-// arguments.
-//
-// Note: Since these are globals and the arguments might change, it is important
-// that the library routine COPY these into buffers from whence they would be
-// sent, rather than merely storing the pointers. In multi-threaded
-// environments, important that the copy should obtain before any context switch
-// is allowed. Also, for parameterized commands, DO NOT ISSUE THE SAME COMMAND
-// MORE THAN ONCE WITH THE SAME PARAMETERS in the same call.
-//
-static UCHAR ct02[];
-static UCHAR ct03[];
-static UCHAR ct04[];
-static UCHAR ct05[];
-static UCHAR ct06[];
-static UCHAR ct07[];
-static UCHAR ct08[];
-static UCHAR ct09[];
-static UCHAR ct10[];
-static UCHAR ct11[];
-static UCHAR ct12[];
-static UCHAR ct13[];
-static UCHAR ct14[];
-static UCHAR ct15[];
-static UCHAR ct16[];
-static UCHAR ct17[];
-static UCHAR ct18[];
-static UCHAR ct19[];
-static UCHAR ct20[];
-static UCHAR ct21[];
-static UCHAR ct22[];
-static UCHAR ct23[];
-static UCHAR ct24[];
-static UCHAR ct25[];
-static UCHAR ct26[];
-static UCHAR ct27[];
-static UCHAR ct28[];
-static UCHAR ct29[];
-static UCHAR ct30[];
-static UCHAR ct31[];
-static UCHAR ct32[];
-static UCHAR ct33[];
-static UCHAR ct34[];
-static UCHAR ct35[];
-static UCHAR ct36[];
-static UCHAR ct36a[];
-static UCHAR ct41[];
-static UCHAR ct42[];
-static UCHAR ct43[];
-static UCHAR ct44[];
-static UCHAR ct45[];
-static UCHAR ct46[];
-static UCHAR ct48[];
-static UCHAR ct49[];
-static UCHAR ct50[];
-static UCHAR ct51[];
-static UCHAR ct52[];
-static UCHAR ct56[];
-static UCHAR ct57[];
-static UCHAR ct58[];
-static UCHAR ct59[];
-static UCHAR ct60[];
-static UCHAR ct61[];
-static UCHAR ct62[];
-static UCHAR ct63[];
-static UCHAR ct64[];
-static UCHAR ct65[];
-static UCHAR ct66[];
-static UCHAR ct67[];
-static UCHAR ct68[];
-static UCHAR ct69[];
-static UCHAR ct70[];
-static UCHAR ct71[];
-static UCHAR ct72[];
-static UCHAR ct73[];
-static UCHAR ct74[];
-static UCHAR ct75[];
-static UCHAR ct76[];
-static UCHAR ct77[];
-static UCHAR ct78[];
-static UCHAR ct79[];
-static UCHAR ct80[];
-static UCHAR ct81[];
-static UCHAR ct82[];
-static UCHAR ct83[];
-static UCHAR ct84[];
-static UCHAR ct85[];
-static UCHAR ct86[];
-static UCHAR ct87[];
-static UCHAR ct88[];
-static UCHAR ct89[];
-static UCHAR ct90[];
-static UCHAR ct91[];
-static UCHAR cc01[];
-static UCHAR cc02[];
-
-// Now, refer to i2cmd.c, and see the character arrays defined there. They are
-// cast here to cmdSyntaxPtr.
-//
-// There are library functions for issuing bypass or inline commands. These
-// functions take one or more arguments of the type cmdSyntaxPtr. The routine
-// then can figure out how long each command is supposed to be and easily add it
-// to the list.
-//
-// For ease of use, we define manifests which return pointers to appropriate
-// cmdSyntaxPtr things. But some commands also take arguments. If a single
-// argument is used, we define a macro which performs the single assignment and
-// (through the expedient of a comma expression) references the appropriate
-// pointer. For commands requiring several arguments, we actually define a
-// function to perform the assignments.
-
-#define CMD_DTRUP (cmdSyntaxPtr)(ct02) // Raise DTR
-#define CMD_DTRDN (cmdSyntaxPtr)(ct03) // Lower DTR
-#define CMD_RTSUP (cmdSyntaxPtr)(ct04) // Raise RTS
-#define CMD_RTSDN (cmdSyntaxPtr)(ct05) // Lower RTS
-#define CMD_STARTFL (cmdSyntaxPtr)(ct06) // Start Flushing Data
-
-#define CMD_DTRRTS_UP (cmdSyntaxPtr)(cc01) // Raise DTR and RTS
-#define CMD_DTRRTS_DN (cmdSyntaxPtr)(cc02) // Lower DTR and RTS
-
-// Set Baud Rate for transmit and receive
-#define CMD_SETBAUD(arg) \
- (((cmdSyntaxPtr)(ct07))->cmd[1] = (arg),(cmdSyntaxPtr)(ct07))
-
-#define CBR_50 1
-#define CBR_75 2
-#define CBR_110 3
-#define CBR_134 4
-#define CBR_150 5
-#define CBR_200 6
-#define CBR_300 7
-#define CBR_600 8
-#define CBR_1200 9
-#define CBR_1800 10
-#define CBR_2400 11
-#define CBR_4800 12
-#define CBR_9600 13
-#define CBR_19200 14
-#define CBR_38400 15
-#define CBR_2000 16
-#define CBR_3600 17
-#define CBR_7200 18
-#define CBR_56000 19
-#define CBR_57600 20
-#define CBR_64000 21
-#define CBR_76800 22
-#define CBR_115200 23
-#define CBR_C1 24 // Custom baud rate 1
-#define CBR_C2 25 // Custom baud rate 2
-#define CBR_153600 26
-#define CBR_230400 27
-#define CBR_307200 28
-#define CBR_460800 29
-#define CBR_921600 30
-
-// Set Character size
-//
-#define CMD_SETBITS(arg) \
- (((cmdSyntaxPtr)(ct08))->cmd[1] = (arg),(cmdSyntaxPtr)(ct08))
-
-#define CSZ_5 0
-#define CSZ_6 1
-#define CSZ_7 2
-#define CSZ_8 3
-
-// Set number of stop bits
-//
-#define CMD_SETSTOP(arg) \
- (((cmdSyntaxPtr)(ct09))->cmd[1] = (arg),(cmdSyntaxPtr)(ct09))
-
-#define CST_1 0
-#define CST_15 1 // 1.5 stop bits
-#define CST_2 2
-
-// Set parity option
-//
-#define CMD_SETPAR(arg) \
- (((cmdSyntaxPtr)(ct10))->cmd[1] = (arg),(cmdSyntaxPtr)(ct10))
-
-#define CSP_NP 0 // no parity
-#define CSP_OD 1 // odd parity
-#define CSP_EV 2 // Even parity
-#define CSP_SP 3 // Space parity
-#define CSP_MK 4 // Mark parity
-
-// Define xon char for transmitter flow control
-//
-#define CMD_DEF_IXON(arg) \
- (((cmdSyntaxPtr)(ct11))->cmd[1] = (arg),(cmdSyntaxPtr)(ct11))
-
-// Define xoff char for transmitter flow control
-//
-#define CMD_DEF_IXOFF(arg) \
- (((cmdSyntaxPtr)(ct12))->cmd[1] = (arg),(cmdSyntaxPtr)(ct12))
-
-#define CMD_STOPFL (cmdSyntaxPtr)(ct13) // Stop Flushing data
-
-// Acknowledge receipt of hotkey signal
-//
-#define CMD_HOTACK (cmdSyntaxPtr)(ct14)
-
-// Define irq level to use. Should actually be sent by library-level code, not
-// directly from user...
-//
-#define CMDVALUE_IRQ 15 // For library use at initialization. Until this command
- // is sent, board processing doesn't really start.
-#define CMD_SET_IRQ(arg) \
- (((cmdSyntaxPtr)(ct15))->cmd[1] = (arg),(cmdSyntaxPtr)(ct15))
-
-#define CIR_POLL 0 // No IRQ - Poll
-#define CIR_3 3 // IRQ 3
-#define CIR_4 4 // IRQ 4
-#define CIR_5 5 // IRQ 5
-#define CIR_7 7 // IRQ 7
-#define CIR_10 10 // IRQ 10
-#define CIR_11 11 // IRQ 11
-#define CIR_12 12 // IRQ 12
-#define CIR_15 15 // IRQ 15
-
-// Select transmit flow xon/xoff options
-//
-#define CMD_IXON_OPT(arg) \
- (((cmdSyntaxPtr)(ct16))->cmd[1] = (arg),(cmdSyntaxPtr)(ct16))
-
-#define CIX_NONE 0 // Incoming Xon/Xoff characters not special
-#define CIX_XON 1 // Xoff disable, Xon enable
-#define CIX_XANY 2 // Xoff disable, any key enable
-
-// Select receive flow xon/xoff options
-//
-#define CMD_OXON_OPT(arg) \
- (((cmdSyntaxPtr)(ct17))->cmd[1] = (arg),(cmdSyntaxPtr)(ct17))
-
-#define COX_NONE 0 // Don't send Xon/Xoff
-#define COX_XON 1 // Send xon/xoff to start/stop incoming data
-
-
-#define CMD_CTS_REP (cmdSyntaxPtr)(ct18) // Enable CTS reporting
-#define CMD_CTS_NREP (cmdSyntaxPtr)(ct19) // Disable CTS reporting
-
-#define CMD_DCD_REP (cmdSyntaxPtr)(ct20) // Enable DCD reporting
-#define CMD_DCD_NREP (cmdSyntaxPtr)(ct21) // Disable DCD reporting
-
-#define CMD_DSR_REP (cmdSyntaxPtr)(ct22) // Enable DSR reporting
-#define CMD_DSR_NREP (cmdSyntaxPtr)(ct23) // Disable DSR reporting
-
-#define CMD_RI_REP (cmdSyntaxPtr)(ct24) // Enable RI reporting
-#define CMD_RI_NREP (cmdSyntaxPtr)(ct25) // Disable RI reporting
-
-// Enable break reporting and select style
-//
-#define CMD_BRK_REP(arg) \
- (((cmdSyntaxPtr)(ct26))->cmd[1] = (arg),(cmdSyntaxPtr)(ct26))
-
-#define CBK_STAT 0x00 // Report breaks as a status (exception,irq)
-#define CBK_NULL 0x01 // Report breaks as a good null
-#define CBK_STAT_SEQ 0x02 // Report breaks as a status AND as in-band character
- // sequence FFh, 01h, 10h
-#define CBK_SEQ 0x03 // Report breaks as the in-band
- //sequence FFh, 01h, 10h ONLY.
-#define CBK_FLSH 0x04 // if this bit set also flush input data
-#define CBK_POSIX 0x08 // if this bit set report as FF,0,0 sequence
-#define CBK_SINGLE 0x10 // if this bit set with CBK_SEQ or CBK_STAT_SEQ
- //then reports single null instead of triple
-
-#define CMD_BRK_NREP (cmdSyntaxPtr)(ct27) // Disable break reporting
-
-// Specify maximum block size for received data
-//
-#define CMD_MAX_BLOCK(arg) \
- (((cmdSyntaxPtr)(ct28))->cmd[1] = (arg),(cmdSyntaxPtr)(ct28))
-
-// -- COMMAND 29 is reserved --
-
-#define CMD_CTSFL_ENAB (cmdSyntaxPtr)(ct30) // Enable CTS flow control
-#define CMD_CTSFL_DSAB (cmdSyntaxPtr)(ct31) // Disable CTS flow control
-#define CMD_RTSFL_ENAB (cmdSyntaxPtr)(ct32) // Enable RTS flow control
-#define CMD_RTSFL_DSAB (cmdSyntaxPtr)(ct33) // Disable RTS flow control
-
-// Specify istrip option
-//
-#define CMD_ISTRIP_OPT(arg) \
- (((cmdSyntaxPtr)(ct34))->cmd[1] = (arg),(cmdSyntaxPtr)(ct34))
-
-#define CIS_NOSTRIP 0 // Strip characters to character size
-#define CIS_STRIP 1 // Strip any 8-bit characters to 7 bits
-
-// Send a break of arg milliseconds
-//
-#define CMD_SEND_BRK(arg) \
- (((cmdSyntaxPtr)(ct35))->cmd[1] = (arg),(cmdSyntaxPtr)(ct35))
-
-// Set error reporting mode
-//
-#define CMD_SET_ERROR(arg) \
- (((cmdSyntaxPtr)(ct36))->cmd[1] = (arg),(cmdSyntaxPtr)(ct36))
-
-#define CSE_ESTAT 0 // Report error in a status packet
-#define CSE_NOREP 1 // Treat character as though it were good
-#define CSE_DROP 2 // Discard the character
-#define CSE_NULL 3 // Replace with a null
-#define CSE_MARK 4 // Replace with a 3-character sequence (as Unix)
-
-#define CSE_REPLACE 0x8 // Replace the errored character with the
- // replacement character defined here
-
-#define CSE_STAT_REPLACE 0x18 // Replace the errored character with the
- // replacement character defined here AND
- // report the error as a status packet (as in
- // CSE_ESTAT).
-
-
-// COMMAND 37, to send flow control packets, is handled only by low-level
-// library code in response to data movement and shouldn't ever be sent by the
-// user code. See i2pack.h and the body of i2lib.c for details.
-
-// Enable on-board post-processing, using options given in oflag argument.
-// Formerly, this command was automatically preceded by a CMD_OPOST_OFF command
-// because the loadware does not permit sending back-to-back CMD_OPOST_ON
-// commands without an intervening CMD_OPOST_OFF. BUT, WE LEARN 18 MAY 92, that
-// CMD_OPOST_ON and CMD_OPOST_OFF must each be at the end of a packet (or in a
-// solo packet). This means the caller must specify separately CMD_OPOST_OFF,
-// CMD_OPOST_ON(parm) when he calls i2QueueCommands(). That function will ensure
-// each gets a separate packet. Extra CMD_OPOST_OFF's are always ok.
-//
-#define CMD_OPOST_ON(oflag) \
- (*(USHORT *)(((cmdSyntaxPtr)(ct39))->cmd[1]) = (oflag), \
- (cmdSyntaxPtr)(ct39))
-
-#define CMD_OPOST_OFF (cmdSyntaxPtr)(ct40) // Disable on-board post-proc
-
-#define CMD_RESUME (cmdSyntaxPtr)(ct41) // Resume: behave as though an XON
- // were received;
-
-// Set Transmit baud rate (see command 7 for arguments)
-//
-#define CMD_SETBAUD_TX(arg) \
- (((cmdSyntaxPtr)(ct42))->cmd[1] = (arg),(cmdSyntaxPtr)(ct42))
-
-// Set Receive baud rate (see command 7 for arguments)
-//
-#define CMD_SETBAUD_RX(arg) \
- (((cmdSyntaxPtr)(ct43))->cmd[1] = (arg),(cmdSyntaxPtr)(ct43))
-
-// Request interrupt from board each arg milliseconds. Interrupt will specify
-// "received data", even though there may be no data present. If arg == 0,
-// disables any such interrupts.
-//
-#define CMD_PING_REQ(arg) \
- (((cmdSyntaxPtr)(ct44))->cmd[1] = (arg),(cmdSyntaxPtr)(ct44))
-
-#define CMD_HOT_ENAB (cmdSyntaxPtr)(ct45) // Enable Hot-key checking
-#define CMD_HOT_DSAB (cmdSyntaxPtr)(ct46) // Disable Hot-key checking
-
-#if 0
-// COMMAND 47: Send Protocol info via Unix flags:
-// iflag = Unix tty t_iflag
-// cflag = Unix tty t_cflag
-// lflag = Unix tty t_lflag
-// See System V Unix/Xenix documentation for the meanings of the bit fields
-// within these flags
-//
-#define CMD_UNIX_FLAGS(iflag,cflag,lflag) i2cmdUnixFlags(iflag,cflag,lflag)
-#endif /* 0 */
-
-#define CMD_DSRFL_ENAB (cmdSyntaxPtr)(ct48) // Enable DSR receiver ctrl
-#define CMD_DSRFL_DSAB (cmdSyntaxPtr)(ct49) // Disable DSR receiver ctrl
-#define CMD_DTRFL_ENAB (cmdSyntaxPtr)(ct50) // Enable DTR flow control
-#define CMD_DTRFL_DSAB (cmdSyntaxPtr)(ct51) // Disable DTR flow control
-#define CMD_BAUD_RESET (cmdSyntaxPtr)(ct52) // Reset baudrate table
-
-// COMMAND 54: Define custom rate #1
-// rate = (short) 1/10 of the desired baud rate
-//
-#define CMD_BAUD_DEF1(rate) i2cmdBaudDef(1,rate)
-
-// COMMAND 55: Define custom rate #2
-// rate = (short) 1/10 of the desired baud rate
-//
-#define CMD_BAUD_DEF2(rate) i2cmdBaudDef(2,rate)
-
-// Pause arg hundredths of seconds. (Note, this is NOT milliseconds.)
-//
-#define CMD_PAUSE(arg) \
- (((cmdSyntaxPtr)(ct56))->cmd[1] = (arg),(cmdSyntaxPtr)(ct56))
-
-#define CMD_SUSPEND (cmdSyntaxPtr)(ct57) // Suspend output
-#define CMD_UNSUSPEND (cmdSyntaxPtr)(ct58) // Un-Suspend output
-
-// Set parity-checking options
-//
-#define CMD_PARCHK(arg) \
- (((cmdSyntaxPtr)(ct59))->cmd[1] = (arg),(cmdSyntaxPtr)(ct59))
-
-#define CPK_ENAB 0 // Enable parity checking on input
-#define CPK_DSAB 1 // Disable parity checking on input
-
-#define CMD_BMARK_REQ (cmdSyntaxPtr)(ct60) // Bookmark request
-
-
-// Enable/Disable internal loopback mode
-//
-#define CMD_INLOOP(arg) \
- (((cmdSyntaxPtr)(ct61))->cmd[1] = (arg),(cmdSyntaxPtr)(ct61))
-
-#define CIN_DISABLE 0 // Normal operation (default)
-#define CIN_ENABLE 1 // Internal (local) loopback
-#define CIN_REMOTE 2 // Remote loopback
-
-// Specify timeout for hotkeys: Delay will be (arg x 10) milliseconds, arg == 0
-// --> no timeout: wait forever.
-//
-#define CMD_HOT_TIME(arg) \
- (((cmdSyntaxPtr)(ct62))->cmd[1] = (arg),(cmdSyntaxPtr)(ct62))
-
-
-// Define (outgoing) xon for receive flow control
-//
-#define CMD_DEF_OXON(arg) \
- (((cmdSyntaxPtr)(ct63))->cmd[1] = (arg),(cmdSyntaxPtr)(ct63))
-
-// Define (outgoing) xoff for receiver flow control
-//
-#define CMD_DEF_OXOFF(arg) \
- (((cmdSyntaxPtr)(ct64))->cmd[1] = (arg),(cmdSyntaxPtr)(ct64))
-
-// Enable/Disable RTS on transmit (1/2 duplex-style)
-//
-#define CMD_RTS_XMIT(arg) \
- (((cmdSyntaxPtr)(ct65))->cmd[1] = (arg),(cmdSyntaxPtr)(ct65))
-
-#define CHD_DISABLE 0
-#define CHD_ENABLE 1
-
-// Set high-water-mark level (debugging use only)
-//
-#define CMD_SETHIGHWAT(arg) \
- (((cmdSyntaxPtr)(ct66))->cmd[1] = (arg),(cmdSyntaxPtr)(ct66))
-
-// Start flushing tagged data (tag = 0-14)
-//
-#define CMD_START_SELFL(tag) \
- (((cmdSyntaxPtr)(ct67))->cmd[1] = (tag),(cmdSyntaxPtr)(ct67))
-
-// End flushing tagged data (tag = 0-14)
-//
-#define CMD_END_SELFL(tag) \
- (((cmdSyntaxPtr)(ct68))->cmd[1] = (tag),(cmdSyntaxPtr)(ct68))
-
-#define CMD_HWFLOW_OFF (cmdSyntaxPtr)(ct69) // Disable HW TX flow control
-#define CMD_ODSRFL_ENAB (cmdSyntaxPtr)(ct70) // Enable DSR output f/c
-#define CMD_ODSRFL_DSAB (cmdSyntaxPtr)(ct71) // Disable DSR output f/c
-#define CMD_ODCDFL_ENAB (cmdSyntaxPtr)(ct72) // Enable DCD output f/c
-#define CMD_ODCDFL_DSAB (cmdSyntaxPtr)(ct73) // Disable DCD output f/c
-
-// Set transmit interrupt load level. Count should be an even value 2-12
-//
-#define CMD_LOADLEVEL(count) \
- (((cmdSyntaxPtr)(ct74))->cmd[1] = (count),(cmdSyntaxPtr)(ct74))
-
-// If reporting DSS changes, map to character sequence FFh, 2, MSR
-//
-#define CMD_STATDATA(arg) \
- (((cmdSyntaxPtr)(ct75))->cmd[1] = (arg),(cmdSyntaxPtr)(ct75))
-
-#define CSTD_DISABLE// Report DSS changes as status packets only (default)
-#define CSTD_ENABLE // Report DSS changes as in-band data sequence as well as
- // by status packet.
-
-#define CMD_BREAK_ON (cmdSyntaxPtr)(ct76)// Set break and stop xmit
-#define CMD_BREAK_OFF (cmdSyntaxPtr)(ct77)// End break and restart xmit
-#define CMD_GETFC (cmdSyntaxPtr)(ct78)// Request for flow control packet
- // from board.
-
-// Transmit this character immediately
-//
-#define CMD_XMIT_NOW(ch) \
- (((cmdSyntaxPtr)(ct79))->cmd[1] = (ch),(cmdSyntaxPtr)(ct79))
-
-// Set baud rate via "divisor latch"
-//
-#define CMD_DIVISOR_LATCH(which,value) \
- (((cmdSyntaxPtr)(ct80))->cmd[1] = (which), \
- *(USHORT *)(((cmdSyntaxPtr)(ct80))->cmd[2]) = (value), \
- (cmdSyntaxPtr)(ct80))
-
-#define CDL_RX 1 // Set receiver rate
-#define CDL_TX 2 // Set transmit rate
- // (CDL_TX | CDL_RX) Set both rates
-
-// Request for special diagnostic status pkt from the board.
-//
-#define CMD_GET_STATUS (cmdSyntaxPtr)(ct81)
-
-// Request time-stamped transmit character count packet.
-//
-#define CMD_GET_TXCNT (cmdSyntaxPtr)(ct82)
-
-// Request time-stamped receive character count packet.
-//
-#define CMD_GET_RXCNT (cmdSyntaxPtr)(ct83)
-
-// Request for box/board I.D. packet.
-#define CMD_GET_BOXIDS (cmdSyntaxPtr)(ct84)
-
-// Enable or disable multiple channels according to bit-mapped ushorts box 1-4
-//
-#define CMD_ENAB_MULT(enable, box1, box2, box3, box4) \
- (((cmdSytaxPtr)(ct85))->cmd[1] = (enable), \
- *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[2]) = (box1), \
- *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[4]) = (box2), \
- *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[6]) = (box3), \
- *(USHORT *)(((cmdSyntaxPtr)(ct85))->cmd[8]) = (box4), \
- (cmdSyntaxPtr)(ct85))
-
-#define CEM_DISABLE 0
-#define CEM_ENABLE 1
-
-// Enable or disable receiver or receiver interrupts (default both enabled)
-//
-#define CMD_RCV_ENABLE(ch) \
- (((cmdSyntaxPtr)(ct86))->cmd[1] = (ch),(cmdSyntaxPtr)(ct86))
-
-#define CRE_OFF 0 // Disable the receiver
-#define CRE_ON 1 // Enable the receiver
-#define CRE_INTOFF 2 // Disable receiver interrupts (to loadware)
-#define CRE_INTON 3 // Enable receiver interrupts (to loadware)
-
-// Starts up a hardware test process, which runs transparently, and sends a
-// STAT_HWFAIL packet in case a hardware failure is detected.
-//
-#define CMD_HW_TEST (cmdSyntaxPtr)(ct87)
-
-// Change receiver threshold and timeout value:
-// Defaults: timeout = 20mS
-// threshold count = 8 when DTRflow not in use,
-// threshold count = 5 when DTRflow in use.
-//
-#define CMD_RCV_THRESHOLD(count,ms) \
- (((cmdSyntaxPtr)(ct88))->cmd[1] = (count), \
- ((cmdSyntaxPtr)(ct88))->cmd[2] = (ms), \
- (cmdSyntaxPtr)(ct88))
-
-// Makes the loadware report DSS signals for this channel immediately.
-//
-#define CMD_DSS_NOW (cmdSyntaxPtr)(ct89)
-
-// Set the receive silo parameters
-// timeout is ms idle wait until delivery (~VTIME)
-// threshold is max characters cause interrupt (~VMIN)
-//
-#define CMD_SET_SILO(timeout,threshold) \
- (((cmdSyntaxPtr)(ct90))->cmd[1] = (timeout), \
- ((cmdSyntaxPtr)(ct90))->cmd[2] = (threshold), \
- (cmdSyntaxPtr)(ct90))
-
-// Set timed break in decisecond (1/10s)
-//
-#define CMD_LBREAK(ds) \
- (((cmdSyntaxPtr)(ct91))->cmd[1] = (ds),(cmdSyntaxPtr)(ct66))
-
-
-
-#endif // I2CMD_H
diff --git a/drivers/char/ip2/i2ellis.c b/drivers/char/ip2/i2ellis.c
deleted file mode 100644
index 29db44d..0000000
--- a/drivers/char/ip2/i2ellis.c
+++ /dev/null
@@ -1,1403 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Low-level interface code for the device driver
-* (This is included source code, not a separate compilation
-* module.)
-*
-*******************************************************************************/
-//---------------------------------------------
-// Function declarations private to this module
-//---------------------------------------------
-// Functions called only indirectly through i2eBordStr entries.
-
-static int iiWriteBuf16(i2eBordStrPtr, unsigned char *, int);
-static int iiWriteBuf8(i2eBordStrPtr, unsigned char *, int);
-static int iiReadBuf16(i2eBordStrPtr, unsigned char *, int);
-static int iiReadBuf8(i2eBordStrPtr, unsigned char *, int);
-
-static unsigned short iiReadWord16(i2eBordStrPtr);
-static unsigned short iiReadWord8(i2eBordStrPtr);
-static void iiWriteWord16(i2eBordStrPtr, unsigned short);
-static void iiWriteWord8(i2eBordStrPtr, unsigned short);
-
-static int iiWaitForTxEmptyII(i2eBordStrPtr, int);
-static int iiWaitForTxEmptyIIEX(i2eBordStrPtr, int);
-static int iiTxMailEmptyII(i2eBordStrPtr);
-static int iiTxMailEmptyIIEX(i2eBordStrPtr);
-static int iiTrySendMailII(i2eBordStrPtr, unsigned char);
-static int iiTrySendMailIIEX(i2eBordStrPtr, unsigned char);
-
-static unsigned short iiGetMailII(i2eBordStrPtr);
-static unsigned short iiGetMailIIEX(i2eBordStrPtr);
-
-static void iiEnableMailIrqII(i2eBordStrPtr);
-static void iiEnableMailIrqIIEX(i2eBordStrPtr);
-static void iiWriteMaskII(i2eBordStrPtr, unsigned char);
-static void iiWriteMaskIIEX(i2eBordStrPtr, unsigned char);
-
-static void ii2Nop(void);
-
-//***************
-//* Static Data *
-//***************
-
-static int ii2Safe; // Safe I/O address for delay routine
-
-static int iiDelayed; // Set when the iiResetDelay function is
- // called. Cleared when ANY board is reset.
-static DEFINE_RWLOCK(Dl_spinlock);
-
-//********
-//* Code *
-//********
-
-//=======================================================
-// Initialization Routines
-//
-// iiSetAddress
-// iiReset
-// iiResetDelay
-// iiInitialize
-//=======================================================
-
-//******************************************************************************
-// Function: iiSetAddress(pB, address, delay)
-// Parameters: pB - pointer to the board structure
-// address - the purported I/O address of the board
-// delay - pointer to the 1-ms delay function to use
-// in this and any future operations to this board
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// This routine (roughly) checks for address validity, sets the i2eValid OK and
-// sets the state to II_STATE_COLD which means that we haven't even sent a reset
-// yet.
-//
-//******************************************************************************
-static int
-iiSetAddress( i2eBordStrPtr pB, int address, delayFunc_t delay )
-{
- // Should any failure occur before init is finished...
- pB->i2eValid = I2E_INCOMPLETE;
-
- // Cannot check upper limit except extremely: Might be microchannel
- // Address must be on an 8-byte boundary
-
- if ((unsigned int)address <= 0x100
- || (unsigned int)address >= 0xfff8
- || (address & 0x7)
- )
- {
- I2_COMPLETE(pB, I2EE_BADADDR);
- }
-
- // Initialize accelerators
- pB->i2eBase = address;
- pB->i2eData = address + FIFO_DATA;
- pB->i2eStatus = address + FIFO_STATUS;
- pB->i2ePointer = address + FIFO_PTR;
- pB->i2eXMail = address + FIFO_MAIL;
- pB->i2eXMask = address + FIFO_MASK;
-
- // Initialize i/o address for ii2DelayIO
- ii2Safe = address + FIFO_NOP;
-
- // Initialize the delay routine
- pB->i2eDelay = ((delay != (delayFunc_t)NULL) ? delay : (delayFunc_t)ii2Nop);
-
- pB->i2eValid = I2E_MAGIC;
- pB->i2eState = II_STATE_COLD;
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiReset(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Attempts to reset the board (see also i2hw.h). Normally, we would use this to
-// reset a board immediately after iiSetAddress(), but it is valid to reset a
-// board from any state, say, in order to change or re-load loadware. (Under
-// such circumstances, no reason to re-run iiSetAddress(), which is why it is a
-// separate routine and not included in this routine.
-//
-//******************************************************************************
-static int
-iiReset(i2eBordStrPtr pB)
-{
- // Magic number should be set, else even the address is suspect
- if (pB->i2eValid != I2E_MAGIC)
- {
- I2_COMPLETE(pB, I2EE_BADMAGIC);
- }
-
- outb(0, pB->i2eBase + FIFO_RESET); /* Any data will do */
- iiDelay(pB, 50); // Pause between resets
- outb(0, pB->i2eBase + FIFO_RESET); /* Second reset */
-
- // We must wait before even attempting to read anything from the FIFO: the
- // board's P.O.S.T may actually attempt to read and write its end of the
- // FIFO in order to check flags, loop back (where supported), etc. On
- // completion of this testing it would reset the FIFO, and on completion
- // of all // P.O.S.T., write the message. We must not mistake data which
- // might have been sent for testing as part of the reset message. To
- // better utilize time, say, when resetting several boards, we allow the
- // delay to be performed externally; in this way the caller can reset
- // several boards, delay a single time, then call the initialization
- // routine for all.
-
- pB->i2eState = II_STATE_RESET;
-
- iiDelayed = 0; // i.e., the delay routine hasn't been called since the most
- // recent reset.
-
- // Ensure anything which would have been of use to standard loadware is
- // blanked out, since board has now forgotten everything!.
-
- pB->i2eUsingIrq = I2_IRQ_UNDEFINED; /* to not use an interrupt so far */
- pB->i2eWaitingForEmptyFifo = 0;
- pB->i2eOutMailWaiting = 0;
- pB->i2eChannelPtr = NULL;
- pB->i2eChannelCnt = 0;
-
- pB->i2eLeadoffWord[0] = 0;
- pB->i2eFifoInInts = 0;
- pB->i2eFifoOutInts = 0;
- pB->i2eFatalTrap = NULL;
- pB->i2eFatal = 0;
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiResetDelay(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Using the delay defined in board structure, waits two seconds (for board to
-// reset).
-//
-//******************************************************************************
-static int
-iiResetDelay(i2eBordStrPtr pB)
-{
- if (pB->i2eValid != I2E_MAGIC) {
- I2_COMPLETE(pB, I2EE_BADMAGIC);
- }
- if (pB->i2eState != II_STATE_RESET) {
- I2_COMPLETE(pB, I2EE_BADSTATE);
- }
- iiDelay(pB,2000); /* Now we wait for two seconds. */
- iiDelayed = 1; /* Delay has been called: ok to initialize */
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiInitialize(pB)
-// Parameters: pB - pointer to the board structure
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Attempts to read the Power-on reset message. Initializes any remaining fields
-// in the pB structure.
-//
-// This should be called as the third step of a process beginning with
-// iiReset(), then iiResetDelay(). This routine checks to see that the structure
-// is "valid" and in the reset state, also confirms that the delay routine has
-// been called since the latest reset (to any board! overly strong!).
-//
-//******************************************************************************
-static int
-iiInitialize(i2eBordStrPtr pB)
-{
- int itemp;
- unsigned char c;
- unsigned short utemp;
- unsigned int ilimit;
-
- if (pB->i2eValid != I2E_MAGIC)
- {
- I2_COMPLETE(pB, I2EE_BADMAGIC);
- }
-
- if (pB->i2eState != II_STATE_RESET || !iiDelayed)
- {
- I2_COMPLETE(pB, I2EE_BADSTATE);
- }
-
- // In case there is a failure short of our completely reading the power-up
- // message.
- pB->i2eValid = I2E_INCOMPLETE;
-
-
- // Now attempt to read the message.
-
- for (itemp = 0; itemp < sizeof(porStr); itemp++)
- {
- // We expect the entire message is ready.
- if (!I2_HAS_INPUT(pB)) {
- pB->i2ePomSize = itemp;
- I2_COMPLETE(pB, I2EE_PORM_SHORT);
- }
-
- pB->i2ePom.c[itemp] = c = inb(pB->i2eData);
-
- // We check the magic numbers as soon as they are supposed to be read
- // (rather than after) to minimize effect of reading something we
- // already suspect can't be "us".
- if ( (itemp == POR_1_INDEX && c != POR_MAGIC_1) ||
- (itemp == POR_2_INDEX && c != POR_MAGIC_2))
- {
- pB->i2ePomSize = itemp+1;
- I2_COMPLETE(pB, I2EE_BADMAGIC);
- }
- }
-
- pB->i2ePomSize = itemp;
-
- // Ensure that this was all the data...
- if (I2_HAS_INPUT(pB))
- I2_COMPLETE(pB, I2EE_PORM_LONG);
-
- // For now, we'll fail to initialize if P.O.S.T reports bad chip mapper:
- // Implying we will not be able to download any code either: That's ok: the
- // condition is pretty explicit.
- if (pB->i2ePom.e.porDiag1 & POR_BAD_MAPPER)
- {
- I2_COMPLETE(pB, I2EE_POSTERR);
- }
-
- // Determine anything which must be done differently depending on the family
- // of boards!
- switch (pB->i2ePom.e.porID & POR_ID_FAMILY)
- {
- case POR_ID_FII: // IntelliPort-II
-
- pB->i2eFifoStyle = FIFO_II;
- pB->i2eFifoSize = 512; // 512 bytes, always
- pB->i2eDataWidth16 = false;
-
- pB->i2eMaxIrq = 15; // Because board cannot tell us it is in an 8-bit
- // slot, we do allow it to be done (documentation!)
-
- pB->i2eGoodMap[1] =
- pB->i2eGoodMap[2] =
- pB->i2eGoodMap[3] =
- pB->i2eChannelMap[1] =
- pB->i2eChannelMap[2] =
- pB->i2eChannelMap[3] = 0;
-
- switch (pB->i2ePom.e.porID & POR_ID_SIZE)
- {
- case POR_ID_II_4:
- pB->i2eGoodMap[0] =
- pB->i2eChannelMap[0] = 0x0f; // four-port
-
- // Since porPorts1 is based on the Hardware ID register, the numbers
- // should always be consistent for IntelliPort-II. Ditto below...
- if (pB->i2ePom.e.porPorts1 != 4)
- {
- I2_COMPLETE(pB, I2EE_INCONSIST);
- }
- break;
-
- case POR_ID_II_8:
- case POR_ID_II_8R:
- pB->i2eGoodMap[0] =
- pB->i2eChannelMap[0] = 0xff; // Eight port
- if (pB->i2ePom.e.porPorts1 != 8)
- {
- I2_COMPLETE(pB, I2EE_INCONSIST);
- }
- break;
-
- case POR_ID_II_6:
- pB->i2eGoodMap[0] =
- pB->i2eChannelMap[0] = 0x3f; // Six Port
- if (pB->i2ePom.e.porPorts1 != 6)
- {
- I2_COMPLETE(pB, I2EE_INCONSIST);
- }
- break;
- }
-
- // Fix up the "good channel list based on any errors reported.
- if (pB->i2ePom.e.porDiag1 & POR_BAD_UART1)
- {
- pB->i2eGoodMap[0] &= ~0x0f;
- }
-
- if (pB->i2ePom.e.porDiag1 & POR_BAD_UART2)
- {
- pB->i2eGoodMap[0] &= ~0xf0;
- }
-
- break; // POR_ID_FII case
-
- case POR_ID_FIIEX: // IntelliPort-IIEX
-
- pB->i2eFifoStyle = FIFO_IIEX;
-
- itemp = pB->i2ePom.e.porFifoSize;
-
- // Implicit assumption that fifo would not grow beyond 32k,
- // nor would ever be less than 256.
-
- if (itemp < 8 || itemp > 15)
- {
- I2_COMPLETE(pB, I2EE_INCONSIST);
- }
- pB->i2eFifoSize = (1 << itemp);
-
- // These are based on what P.O.S.T thinks should be there, based on
- // box ID registers
- ilimit = pB->i2ePom.e.porNumBoxes;
- if (ilimit > ABS_MAX_BOXES)
- {
- ilimit = ABS_MAX_BOXES;
- }
-
- // For as many boxes as EXIST, gives the type of box.
- // Added 8/6/93: check for the ISA-4 (asic) which looks like an
- // expandable but for whom "8 or 16?" is not the right question.
-
- utemp = pB->i2ePom.e.porFlags;
- if (utemp & POR_CEX4)
- {
- pB->i2eChannelMap[0] = 0x000f;
- } else {
- utemp &= POR_BOXES;
- for (itemp = 0; itemp < ilimit; itemp++)
- {
- pB->i2eChannelMap[itemp] =
- ((utemp & POR_BOX_16) ? 0xffff : 0x00ff);
- utemp >>= 1;
- }
- }
-
- // These are based on what P.O.S.T actually found.
-
- utemp = (pB->i2ePom.e.porPorts2 << 8) + pB->i2ePom.e.porPorts1;
-
- for (itemp = 0; itemp < ilimit; itemp++)
- {
- pB->i2eGoodMap[itemp] = 0;
- if (utemp & 1) pB->i2eGoodMap[itemp] |= 0x000f;
- if (utemp & 2) pB->i2eGoodMap[itemp] |= 0x00f0;
- if (utemp & 4) pB->i2eGoodMap[itemp] |= 0x0f00;
- if (utemp & 8) pB->i2eGoodMap[itemp] |= 0xf000;
- utemp >>= 4;
- }
-
- // Now determine whether we should transfer in 8 or 16-bit mode.
- switch (pB->i2ePom.e.porBus & (POR_BUS_SLOT16 | POR_BUS_DIP16) )
- {
- case POR_BUS_SLOT16 | POR_BUS_DIP16:
- pB->i2eDataWidth16 = true;
- pB->i2eMaxIrq = 15;
- break;
-
- case POR_BUS_SLOT16:
- pB->i2eDataWidth16 = false;
- pB->i2eMaxIrq = 15;
- break;
-
- case 0:
- case POR_BUS_DIP16: // In an 8-bit slot, DIP switch don't care.
- default:
- pB->i2eDataWidth16 = false;
- pB->i2eMaxIrq = 7;
- break;
- }
- break; // POR_ID_FIIEX case
-
- default: // Unknown type of board
- I2_COMPLETE(pB, I2EE_BAD_FAMILY);
- break;
- } // End the switch based on family
-
- // Temporarily, claim there is no room in the outbound fifo.
- // We will maintain this whenever we check for an empty outbound FIFO.
- pB->i2eFifoRemains = 0;
-
- // Now, based on the bus type, should we expect to be able to re-configure
- // interrupts (say, for testing purposes).
- switch (pB->i2ePom.e.porBus & POR_BUS_TYPE)
- {
- case POR_BUS_T_ISA:
- case POR_BUS_T_UNK: // If the type of bus is undeclared, assume ok.
- case POR_BUS_T_MCA:
- case POR_BUS_T_EISA:
- break;
- default:
- I2_COMPLETE(pB, I2EE_BADBUS);
- }
-
- if (pB->i2eDataWidth16)
- {
- pB->i2eWriteBuf = iiWriteBuf16;
- pB->i2eReadBuf = iiReadBuf16;
- pB->i2eWriteWord = iiWriteWord16;
- pB->i2eReadWord = iiReadWord16;
- } else {
- pB->i2eWriteBuf = iiWriteBuf8;
- pB->i2eReadBuf = iiReadBuf8;
- pB->i2eWriteWord = iiWriteWord8;
- pB->i2eReadWord = iiReadWord8;
- }
-
- switch(pB->i2eFifoStyle)
- {
- case FIFO_II:
- pB->i2eWaitForTxEmpty = iiWaitForTxEmptyII;
- pB->i2eTxMailEmpty = iiTxMailEmptyII;
- pB->i2eTrySendMail = iiTrySendMailII;
- pB->i2eGetMail = iiGetMailII;
- pB->i2eEnableMailIrq = iiEnableMailIrqII;
- pB->i2eWriteMask = iiWriteMaskII;
-
- break;
-
- case FIFO_IIEX:
- pB->i2eWaitForTxEmpty = iiWaitForTxEmptyIIEX;
- pB->i2eTxMailEmpty = iiTxMailEmptyIIEX;
- pB->i2eTrySendMail = iiTrySendMailIIEX;
- pB->i2eGetMail = iiGetMailIIEX;
- pB->i2eEnableMailIrq = iiEnableMailIrqIIEX;
- pB->i2eWriteMask = iiWriteMaskIIEX;
-
- break;
-
- default:
- I2_COMPLETE(pB, I2EE_INCONSIST);
- }
-
- // Initialize state information.
- pB->i2eState = II_STATE_READY; // Ready to load loadware.
-
- // Some Final cleanup:
- // For some boards, the bootstrap firmware may perform some sort of test
- // resulting in a stray character pending in the incoming mailbox. If one is
- // there, it should be read and discarded, especially since for the standard
- // firmware, it's the mailbox that interrupts the host.
-
- pB->i2eStartMail = iiGetMail(pB);
-
- // Throw it away and clear the mailbox structure element
- pB->i2eStartMail = NO_MAIL_HERE;
-
- // Everything is ok now, return with good status/
-
- pB->i2eValid = I2E_MAGIC;
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: ii2DelayTimer(mseconds)
-// Parameters: mseconds - number of milliseconds to delay
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine delays for approximately mseconds milliseconds and is intended
-// to be called indirectly through i2Delay field in i2eBordStr. It uses the
-// Linux timer_list mechanism.
-//
-// The Linux timers use a unit called "jiffies" which are 10mS in the Intel
-// architecture. This function rounds the delay period up to the next "jiffy".
-// In the Alpha architecture the "jiffy" is 1mS, but this driver is not intended
-// for Alpha platforms at this time.
-//
-//******************************************************************************
-static void
-ii2DelayTimer(unsigned int mseconds)
-{
- msleep_interruptible(mseconds);
-}
-
-#if 0
-//static void ii2DelayIO(unsigned int);
-//******************************************************************************
-// !!! Not Used, this is DOS crap, some of you young folks may be interested in
-// in how things were done in the stone age of caculating machines !!!
-// Function: ii2DelayIO(mseconds)
-// Parameters: mseconds - number of milliseconds to delay
-//
-// Returns: Nothing
-//
-// Description:
-//
-// This routine delays for approximately mseconds milliseconds and is intended
-// to be called indirectly through i2Delay field in i2eBordStr. It is intended
-// for use where a clock-based function is impossible: for example, DOS drivers.
-//
-// This function uses the IN instruction to place bounds on the timing and
-// assumes that ii2Safe has been set. This is because I/O instructions are not
-// subject to caching and will therefore take a certain minimum time. To ensure
-// the delay is at least long enough on fast machines, it is based on some
-// fastest-case calculations. On slower machines this may cause VERY long
-// delays. (3 x fastest case). In the fastest case, everything is cached except
-// the I/O instruction itself.
-//
-// Timing calculations:
-// The fastest bus speed for I/O operations is likely to be 10 MHz. The I/O
-// operation in question is a byte operation to an odd address. For 8-bit
-// operations, the architecture generally enforces two wait states. At 10 MHz, a
-// single cycle time is 100nS. A read operation at two wait states takes 6
-// cycles for a total time of 600nS. Therefore approximately 1666 iterations
-// would be required to generate a single millisecond delay. The worst
-// (reasonable) case would be an 8MHz system with no cacheing. In this case, the
-// I/O instruction would take 125nS x 6 cyles = 750 nS. More importantly, code
-// fetch of other instructions in the loop would take time (zero wait states,
-// however) and would be hard to estimate. This is minimized by using in-line
-// assembler for the in inner loop of IN instructions. This consists of just a
-// few bytes. So we'll guess about four code fetches per loop. Each code fetch
-// should take four cycles, so we have 125nS * 8 = 1000nS. Worst case then is
-// that what should have taken 1 mS takes instead 1666 * (1750) = 2.9 mS.
-//
-// So much for theoretical timings: results using 1666 value on some actual
-// machines:
-// IBM 286 6MHz 3.15 mS
-// Zenith 386 33MHz 2.45 mS
-// (brandX) 386 33MHz 1.90 mS (has cache)
-// (brandY) 486 33MHz 2.35 mS
-// NCR 486 ?? 1.65 mS (microchannel)
-//
-// For most machines, it is probably safe to scale this number back (remember,
-// for robust operation use an actual timed delay if possible), so we are using
-// a value of 1190. This yields 1.17 mS for the fastest machine in our sample,
-// 1.75 mS for typical 386 machines, and 2.25 mS the absolute slowest machine.
-//
-// 1/29/93:
-// The above timings are too slow. Actual cycle times might be faster. ISA cycle
-// times could approach 500 nS, and ...
-// The IBM model 77 being microchannel has no wait states for 8-bit reads and
-// seems to be accessing the I/O at 440 nS per access (from start of one to
-// start of next). This would imply we need 1000/.440 = 2272 iterations to
-// guarantee we are fast enough. In actual testing, we see that 2 * 1190 are in
-// fact enough. For diagnostics, we keep the level at 1190, but developers note
-// this needs tuning.
-//
-// Safe assumption: 2270 i/o reads = 1 millisecond
-//
-//******************************************************************************
-
-
-static int ii2DelValue = 1190; // See timing calculations below
- // 1666 for fastest theoretical machine
- // 1190 safe for most fast 386 machines
- // 1000 for fastest machine tested here
- // 540 (sic) for AT286/6Mhz
-static void
-ii2DelayIO(unsigned int mseconds)
-{
- if (!ii2Safe)
- return; /* Do nothing if this variable uninitialized */
-
- while(mseconds--) {
- int i = ii2DelValue;
- while ( i-- ) {
- inb(ii2Safe);
- }
- }
-}
-#endif
-
-//******************************************************************************
-// Function: ii2Nop()
-// Parameters: None
-//
-// Returns: Nothing
-//
-// Description:
-//
-// iiInitialize will set i2eDelay to this if the delay parameter is NULL. This
-// saves checking for a NULL pointer at every call.
-//******************************************************************************
-static void
-ii2Nop(void)
-{
- return; // no mystery here
-}
-
-//=======================================================
-// Routines which are available in 8/16-bit versions, or
-// in different fifo styles. These are ALL called
-// indirectly through the board structure.
-//=======================================================
-
-//******************************************************************************
-// Function: iiWriteBuf16(pB, address, count)
-// Parameters: pB - pointer to board structure
-// address - address of data to write
-// count - number of data bytes to write
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes 'count' bytes from 'address' to the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// sent (identity unknown...). Uses 16-bit (word) operations. Is called
-// indirectly through pB->i2eWriteBuf.
-//
-//******************************************************************************
-static int
-iiWriteBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
-{
- // Rudimentary sanity checking here.
- if (pB->i2eValid != I2E_MAGIC)
- I2_COMPLETE(pB, I2EE_INVALID);
-
- I2_OUTSW(pB->i2eData, address, count);
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiWriteBuf8(pB, address, count)
-// Parameters: pB - pointer to board structure
-// address - address of data to write
-// count - number of data bytes to write
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes 'count' bytes from 'address' to the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// sent (identity unknown...). This is to be consistent with the 16-bit version.
-// Uses 8-bit (byte) operations. Is called indirectly through pB->i2eWriteBuf.
-//
-//******************************************************************************
-static int
-iiWriteBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
-{
- /* Rudimentary sanity checking here */
- if (pB->i2eValid != I2E_MAGIC)
- I2_COMPLETE(pB, I2EE_INVALID);
-
- I2_OUTSB(pB->i2eData, address, count);
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiReadBuf16(pB, address, count)
-// Parameters: pB - pointer to board structure
-// address - address to put data read
-// count - number of data bytes to read
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Reads 'count' bytes into 'address' from the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// received (identity unknown...). Uses 16-bit (word) operations. Is called
-// indirectly through pB->i2eReadBuf.
-//
-//******************************************************************************
-static int
-iiReadBuf16(i2eBordStrPtr pB, unsigned char *address, int count)
-{
- // Rudimentary sanity checking here.
- if (pB->i2eValid != I2E_MAGIC)
- I2_COMPLETE(pB, I2EE_INVALID);
-
- I2_INSW(pB->i2eData, address, count);
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiReadBuf8(pB, address, count)
-// Parameters: pB - pointer to board structure
-// address - address to put data read
-// count - number of data bytes to read
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Reads 'count' bytes into 'address' from the data fifo specified by the board
-// structure pointer pB. Should count happen to be odd, an extra pad byte is
-// received (identity unknown...). This to match the 16-bit behaviour. Uses
-// 8-bit (byte) operations. Is called indirectly through pB->i2eReadBuf.
-//
-//******************************************************************************
-static int
-iiReadBuf8(i2eBordStrPtr pB, unsigned char *address, int count)
-{
- // Rudimentary sanity checking here.
- if (pB->i2eValid != I2E_MAGIC)
- I2_COMPLETE(pB, I2EE_INVALID);
-
- I2_INSB(pB->i2eData, address, count);
-
- I2_COMPLETE(pB, I2EE_GOOD);
-}
-
-//******************************************************************************
-// Function: iiReadWord16(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Returns the word read from the data fifo specified by the board-structure
-// pointer pB. Uses a 16-bit operation. Is called indirectly through
-// pB->i2eReadWord.
-//
-//******************************************************************************
-static unsigned short
-iiReadWord16(i2eBordStrPtr pB)
-{
- return inw(pB->i2eData);
-}
-
-//******************************************************************************
-// Function: iiReadWord8(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Returns the word read from the data fifo specified by the board-structure
-// pointer pB. Uses two 8-bit operations. Bytes are assumed to be LSB first. Is
-// called indirectly through pB->i2eReadWord.
-//
-//******************************************************************************
-static unsigned short
-iiReadWord8(i2eBordStrPtr pB)
-{
- unsigned short urs;
-
- urs = inb(pB->i2eData);
-
- return (inb(pB->i2eData) << 8) | urs;
-}
-
-//******************************************************************************
-// Function: iiWriteWord16(pB, value)
-// Parameters: pB - pointer to board structure
-// value - data to write
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes the word 'value' to the data fifo specified by the board-structure
-// pointer pB. Uses 16-bit operation. Is called indirectly through
-// pB->i2eWriteWord.
-//
-//******************************************************************************
-static void
-iiWriteWord16(i2eBordStrPtr pB, unsigned short value)
-{
- outw((int)value, pB->i2eData);
-}
-
-//******************************************************************************
-// Function: iiWriteWord8(pB, value)
-// Parameters: pB - pointer to board structure
-// value - data to write
-//
-// Returns: True if everything appears copacetic.
-// False if there is any error: the pB->i2eError field has the error
-//
-// Description:
-//
-// Writes the word 'value' to the data fifo specified by the board-structure
-// pointer pB. Uses two 8-bit operations (writes LSB first). Is called
-// indirectly through pB->i2eWriteWord.
-//
-//******************************************************************************
-static void
-iiWriteWord8(i2eBordStrPtr pB, unsigned short value)
-{
- outb((char)value, pB->i2eData);
- outb((char)(value >> 8), pB->i2eData);
-}
-
-//******************************************************************************
-// Function: iiWaitForTxEmptyII(pB, mSdelay)
-// Parameters: pB - pointer to board structure
-// mSdelay - period to wait before returning
-//
-// Returns: True if the FIFO is empty.
-// False if it not empty in the required time: the pB->i2eError
-// field has the error.
-//
-// Description:
-//
-// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if
-// not empty by the required time, returns false and error in pB->i2eError,
-// otherwise returns true.
-//
-// mSdelay == 0 is taken to mean must be empty on the first test.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-// Note this routine is organized so that if status is ok there is no delay at
-// all called either before or after the test. Is called indirectly through
-// pB->i2eWaitForTxEmpty.
-//
-//******************************************************************************
-static int
-iiWaitForTxEmptyII(i2eBordStrPtr pB, int mSdelay)
-{
- unsigned long flags;
- int itemp;
-
- for (;;)
- {
- // This routine hinges on being able to see the "other" status register
- // (as seen by the local processor). His incoming fifo is our outgoing
- // FIFO.
- //
- // By the nature of this routine, you would be using this as part of a
- // larger atomic context: i.e., you would use this routine to ensure the
- // fifo empty, then act on this information. Between these two halves,
- // you will generally not want to service interrupts or in any way
- // disrupt the assumptions implicit in the larger context.
- //
- // Even worse, however, this routine "shifts" the status register to
- // point to the local status register which is not the usual situation.
- // Therefore for extra safety, we force the critical section to be
- // completely atomic, and pick up after ourselves before allowing any
- // interrupts of any kind.
-
-
- write_lock_irqsave(&Dl_spinlock, flags);
- outb(SEL_COMMAND, pB->i2ePointer);
- outb(SEL_CMD_SH, pB->i2ePointer);
-
- itemp = inb(pB->i2eStatus);
-
- outb(SEL_COMMAND, pB->i2ePointer);
- outb(SEL_CMD_UNSH, pB->i2ePointer);
-
- if (itemp & ST_IN_EMPTY)
- {
- I2_UPDATE_FIFO_ROOM(pB);
- write_unlock_irqrestore(&Dl_spinlock, flags);
- I2_COMPLETE(pB, I2EE_GOOD);
- }
-
- write_unlock_irqrestore(&Dl_spinlock, flags);
-
- if (mSdelay-- == 0)
- break;
-
- iiDelay(pB, 1); /* 1 mS granularity on checking condition */
- }
- I2_COMPLETE(pB, I2EE_TXE_TIME);
-}
-
-//******************************************************************************
-// Function: iiWaitForTxEmptyIIEX(pB, mSdelay)
-// Parameters: pB - pointer to board structure
-// mSdelay - period to wait before returning
-//
-// Returns: True if the FIFO is empty.
-// False if it not empty in the required time: the pB->i2eError
-// field has the error.
-//
-// Description:
-//
-// Waits up to "mSdelay" milliseconds for the outgoing FIFO to become empty; if
-// not empty by the required time, returns false and error in pB->i2eError,
-// otherwise returns true.
-//
-// mSdelay == 0 is taken to mean must be empty on the first test.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-// Note this routine is organized so that if status is ok there is no delay at
-// all called either before or after the test. Is called indirectly through
-// pB->i2eWaitForTxEmpty.
-//
-//******************************************************************************
-static int
-iiWaitForTxEmptyIIEX(i2eBordStrPtr pB, int mSdelay)
-{
- unsigned long flags;
-
- for (;;)
- {
- // By the nature of this routine, you would be using this as part of a
- // larger atomic context: i.e., you would use this routine to ensure the
- // fifo empty, then act on this information. Between these two halves,
- // you will generally not want to service interrupts or in any way
- // disrupt the assumptions implicit in the larger context.
-
- write_lock_irqsave(&Dl_spinlock, flags);
-
- if (inb(pB->i2eStatus) & STE_OUT_MT) {
- I2_UPDATE_FIFO_ROOM(pB);
- write_unlock_irqrestore(&Dl_spinlock, flags);
- I2_COMPLETE(pB, I2EE_GOOD);
- }
- write_unlock_irqrestore(&Dl_spinlock, flags);
-
- if (mSdelay-- == 0)
- break;
-
- iiDelay(pB, 1); // 1 mS granularity on checking condition
- }
- I2_COMPLETE(pB, I2EE_TXE_TIME);
-}
-
-//******************************************************************************
-// Function: iiTxMailEmptyII(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: True if the transmit mailbox is empty.
-// False if it not empty.
-//
-// Description:
-//
-// Returns true or false according to whether the transmit mailbox is empty (and
-// therefore able to accept more mail)
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static int
-iiTxMailEmptyII(i2eBordStrPtr pB)
-{
- int port = pB->i2ePointer;
- outb(SEL_OUTMAIL, port);
- return inb(port) == 0;
-}
-
-//******************************************************************************
-// Function: iiTxMailEmptyIIEX(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: True if the transmit mailbox is empty.
-// False if it not empty.
-//
-// Description:
-//
-// Returns true or false according to whether the transmit mailbox is empty (and
-// therefore able to accept more mail)
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static int
-iiTxMailEmptyIIEX(i2eBordStrPtr pB)
-{
- return !(inb(pB->i2eStatus) & STE_OUT_MAIL);
-}
-
-//******************************************************************************
-// Function: iiTrySendMailII(pB,mail)
-// Parameters: pB - pointer to board structure
-// mail - value to write to mailbox
-//
-// Returns: True if the transmit mailbox is empty, and mail is sent.
-// False if it not empty.
-//
-// Description:
-//
-// If outgoing mailbox is empty, sends mail and returns true. If outgoing
-// mailbox is not empty, returns false.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static int
-iiTrySendMailII(i2eBordStrPtr pB, unsigned char mail)
-{
- int port = pB->i2ePointer;
-
- outb(SEL_OUTMAIL, port);
- if (inb(port) == 0) {
- outb(SEL_OUTMAIL, port);
- outb(mail, port);
- return 1;
- }
- return 0;
-}
-
-//******************************************************************************
-// Function: iiTrySendMailIIEX(pB,mail)
-// Parameters: pB - pointer to board structure
-// mail - value to write to mailbox
-//
-// Returns: True if the transmit mailbox is empty, and mail is sent.
-// False if it not empty.
-//
-// Description:
-//
-// If outgoing mailbox is empty, sends mail and returns true. If outgoing
-// mailbox is not empty, returns false.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static int
-iiTrySendMailIIEX(i2eBordStrPtr pB, unsigned char mail)
-{
- if (inb(pB->i2eStatus) & STE_OUT_MAIL)
- return 0;
- outb(mail, pB->i2eXMail);
- return 1;
-}
-
-//******************************************************************************
-// Function: iiGetMailII(pB,mail)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Mailbox data or NO_MAIL_HERE.
-//
-// Description:
-//
-// If no mail available, returns NO_MAIL_HERE otherwise returns the data from
-// the mailbox, which is guaranteed != NO_MAIL_HERE.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static unsigned short
-iiGetMailII(i2eBordStrPtr pB)
-{
- if (I2_HAS_MAIL(pB)) {
- outb(SEL_INMAIL, pB->i2ePointer);
- return inb(pB->i2ePointer);
- } else {
- return NO_MAIL_HERE;
- }
-}
-
-//******************************************************************************
-// Function: iiGetMailIIEX(pB,mail)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Mailbox data or NO_MAIL_HERE.
-//
-// Description:
-//
-// If no mail available, returns NO_MAIL_HERE otherwise returns the data from
-// the mailbox, which is guaranteed != NO_MAIL_HERE.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static unsigned short
-iiGetMailIIEX(i2eBordStrPtr pB)
-{
- if (I2_HAS_MAIL(pB))
- return inb(pB->i2eXMail);
- else
- return NO_MAIL_HERE;
-}
-
-//******************************************************************************
-// Function: iiEnableMailIrqII(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Nothing
-//
-// Description:
-//
-// Enables board to interrupt host (only) by writing to host's in-bound mailbox.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static void
-iiEnableMailIrqII(i2eBordStrPtr pB)
-{
- outb(SEL_MASK, pB->i2ePointer);
- outb(ST_IN_MAIL, pB->i2ePointer);
-}
-
-//******************************************************************************
-// Function: iiEnableMailIrqIIEX(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Nothing
-//
-// Description:
-//
-// Enables board to interrupt host (only) by writing to host's in-bound mailbox.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static void
-iiEnableMailIrqIIEX(i2eBordStrPtr pB)
-{
- outb(MX_IN_MAIL, pB->i2eXMask);
-}
-
-//******************************************************************************
-// Function: iiWriteMaskII(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Nothing
-//
-// Description:
-//
-// Writes arbitrary value to the mask register.
-//
-// This version operates on IntelliPort-II - style FIFO's
-//
-//******************************************************************************
-static void
-iiWriteMaskII(i2eBordStrPtr pB, unsigned char value)
-{
- outb(SEL_MASK, pB->i2ePointer);
- outb(value, pB->i2ePointer);
-}
-
-//******************************************************************************
-// Function: iiWriteMaskIIEX(pB)
-// Parameters: pB - pointer to board structure
-//
-// Returns: Nothing
-//
-// Description:
-//
-// Writes arbitrary value to the mask register.
-//
-// This version operates on IntelliPort-IIEX - style FIFO's
-//
-//******************************************************************************
-static void
-iiWriteMaskIIEX(i2eBordStrPtr pB, unsigned char value)
-{
- outb(value, pB->i2eXMask);
-}
-
-//******************************************************************************
-// Function: iiDownloadBlock(pB, pSource, isStandard)
-// Parameters: pB - pointer to board structure
-// pSource - loadware block to download
-// isStandard - True if "standard" loadware, else false.
-//
-// Returns: Success or Failure
-//
-// Description:
-//
-// Downloads a single block (at pSource)to the board referenced by pB. Caller
-// sets isStandard to true/false according to whether the "standard" loadware is
-// what's being loaded. The normal process, then, is to perform an iiInitialize
-// to the board, then perform some number of iiDownloadBlocks using the returned
-// state to determine when download is complete.
-//
-// Possible return values: (see I2ELLIS.H)
-// II_DOWN_BADVALID
-// II_DOWN_BADFILE
-// II_DOWN_CONTINUING
-// II_DOWN_GOOD
-// II_DOWN_BAD
-// II_DOWN_BADSTATE
-// II_DOWN_TIMEOUT
-//
-// Uses the i2eState and i2eToLoad fields (initialized at iiInitialize) to
-// determine whether this is the first block, whether to check for magic
-// numbers, how many blocks there are to go...
-//
-//******************************************************************************
-static int
-iiDownloadBlock ( i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard)
-{
- int itemp;
- int loadedFirst;
-
- if (pB->i2eValid != I2E_MAGIC) return II_DOWN_BADVALID;
-
- switch(pB->i2eState)
- {
- case II_STATE_READY:
-
- // Loading the first block after reset. Must check the magic number of the
- // loadfile, store the number of blocks we expect to load.
- if (pSource->e.loadMagic != MAGIC_LOADFILE)
- {
- return II_DOWN_BADFILE;
- }
-
- // Next we store the total number of blocks to load, including this one.
- pB->i2eToLoad = 1 + pSource->e.loadBlocksMore;
-
- // Set the state, store the version numbers. ('Cause this may have come
- // from a file - we might want to report these versions and revisions in
- // case of an error!
- pB->i2eState = II_STATE_LOADING;
- pB->i2eLVersion = pSource->e.loadVersion;
- pB->i2eLRevision = pSource->e.loadRevision;
- pB->i2eLSub = pSource->e.loadSubRevision;
-
- // The time and date of compilation is also available but don't bother
- // storing it for normal purposes.
- loadedFirst = 1;
- break;
-
- case II_STATE_LOADING:
- loadedFirst = 0;
- break;
-
- default:
- return II_DOWN_BADSTATE;
- }
-
- // Now we must be in the II_STATE_LOADING state, and we assume i2eToLoad
- // must be positive still, because otherwise we would have cleaned up last
- // time and set the state to II_STATE_LOADED.
- if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) {
- return II_DOWN_TIMEOUT;
- }
-
- if (!iiWriteBuf(pB, pSource->c, LOADWARE_BLOCK_SIZE)) {
- return II_DOWN_BADVALID;
- }
-
- // If we just loaded the first block, wait for the fifo to empty an extra
- // long time to allow for any special startup code in the firmware, like
- // sending status messages to the LCD's.
-
- if (loadedFirst) {
- if (!iiWaitForTxEmpty(pB, MAX_DLOAD_START_TIME)) {
- return II_DOWN_TIMEOUT;
- }
- }
-
- // Determine whether this was our last block!
- if (--(pB->i2eToLoad)) {
- return II_DOWN_CONTINUING; // more to come...
- }
-
- // It WAS our last block: Clean up operations...
- // ...Wait for last buffer to drain from the board...
- if (!iiWaitForTxEmpty(pB, MAX_DLOAD_READ_TIME)) {
- return II_DOWN_TIMEOUT;
- }
- // If there were only a single block written, this would come back
- // immediately and be harmless, though not strictly necessary.
- itemp = MAX_DLOAD_ACK_TIME/10;
- while (--itemp) {
- if (I2_HAS_INPUT(pB)) {
- switch (inb(pB->i2eData)) {
- case LOADWARE_OK:
- pB->i2eState =
- isStandard ? II_STATE_STDLOADED :II_STATE_LOADED;
-
- // Some revisions of the bootstrap firmware (e.g. ISA-8 1.0.2)
- // will, // if there is a debug port attached, require some
- // time to send information to the debug port now. It will do
- // this before // executing any of the code we just downloaded.
- // It may take up to 700 milliseconds.
- if (pB->i2ePom.e.porDiag2 & POR_DEBUG_PORT) {
- iiDelay(pB, 700);
- }
-
- return II_DOWN_GOOD;
-
- case LOADWARE_BAD:
- default:
- return II_DOWN_BAD;
- }
- }
-
- iiDelay(pB, 10); // 10 mS granularity on checking condition
- }
-
- // Drop-through --> timed out waiting for firmware confirmation
-
- pB->i2eState = II_STATE_BADLOAD;
- return II_DOWN_TIMEOUT;
-}
-
-//******************************************************************************
-// Function: iiDownloadAll(pB, pSource, isStandard, size)
-// Parameters: pB - pointer to board structure
-// pSource - loadware block to download
-// isStandard - True if "standard" loadware, else false.
-// size - size of data to download (in bytes)
-//
-// Returns: Success or Failure
-//
-// Description:
-//
-// Given a pointer to a board structure, a pointer to the beginning of some
-// loadware, whether it is considered the "standard loadware", and the size of
-// the array in bytes loads the entire array to the board as loadware.
-//
-// Assumes the board has been freshly reset and the power-up reset message read.
-// (i.e., in II_STATE_READY). Complains if state is bad, or if there seems to be
-// too much or too little data to load, or if iiDownloadBlock complains.
-//******************************************************************************
-static int
-iiDownloadAll(i2eBordStrPtr pB, loadHdrStrPtr pSource, int isStandard, int size)
-{
- int status;
-
- // We know (from context) board should be ready for the first block of
- // download. Complain if not.
- if (pB->i2eState != II_STATE_READY) return II_DOWN_BADSTATE;
-
- while (size > 0) {
- size -= LOADWARE_BLOCK_SIZE; // How much data should there be left to
- // load after the following operation ?
-
- // Note we just bump pSource by "one", because its size is actually that
- // of an entire block, same as LOADWARE_BLOCK_SIZE.
- status = iiDownloadBlock(pB, pSource++, isStandard);
-
- switch(status)
- {
- case II_DOWN_GOOD:
- return ( (size > 0) ? II_DOWN_OVER : II_DOWN_GOOD);
-
- case II_DOWN_CONTINUING:
- break;
-
- default:
- return status;
- }
- }
-
- // We shouldn't drop out: it means "while" caught us with nothing left to
- // download, yet the previous DownloadBlock did not return complete. Ergo,
- // not enough data to match the size byte in the header.
- return II_DOWN_UNDER;
-}
diff --git a/drivers/char/ip2/i2ellis.h b/drivers/char/ip2/i2ellis.h
deleted file mode 100644
index fb6df24..0000000
--- a/drivers/char/ip2/i2ellis.h
+++ /dev/null
@@ -1,566 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Mainline code for the device driver
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// i2ellis.h
-//
-// IntelliPort-II and IntelliPort-IIEX
-//
-// Extremely
-// Low
-// Level
-// Interface
-// Services
-//
-// Structure Definitions and declarations for "ELLIS" service routines found in
-// i2ellis.c
-//
-// These routines are based on properties of the IntelliPort-II and -IIEX
-// hardware and bootstrap firmware, and are not sensitive to particular
-// conventions of any particular loadware.
-//
-// Unlike i2hw.h, which provides IRONCLAD hardware definitions, the material
-// here and in i2ellis.c is intended to provice a useful, but not required,
-// layer of insulation from the hardware specifics.
-//------------------------------------------------------------------------------
-#ifndef I2ELLIS_H /* To prevent multiple includes */
-#define I2ELLIS_H 1
-//------------------------------------------------
-// Revision History:
-//
-// 30 September 1991 MAG First Draft Started
-// 12 October 1991 ...continued...
-//
-// 20 December 1996 AKM Linux version
-//-------------------------------------------------
-
-//----------------------
-// Mandatory Includes:
-//----------------------
-#include "ip2types.h"
-#include "i2hw.h" // The hardware definitions
-
-//------------------------------------------
-// STAT_BOXIDS packets
-//------------------------------------------
-#define MAX_BOX 4
-
-typedef struct _bidStat
-{
- unsigned char bid_value[MAX_BOX];
-} bidStat, *bidStatPtr;
-
-// This packet is sent in response to a CMD_GET_BOXIDS bypass command. For -IIEX
-// boards, reports the hardware-specific "asynchronous resource register" on
-// each expansion box. Boxes not present report 0xff. For -II boards, the first
-// element contains 0x80 for 8-port, 0x40 for 4-port boards.
-
-// Box IDs aka ARR or Async Resource Register (more than you want to know)
-// 7 6 5 4 3 2 1 0
-// F F N N L S S S
-// =============================
-// F F - Product Family Designator
-// =====+++++++++++++++++++++++++++++++
-// 0 0 - Intelliport II EX / ISA-8
-// 1 0 - IntelliServer
-// 0 1 - SAC - Port Device (Intelliport III ??? )
-// =====+++++++++++++++++++++++++++++++++++++++
-// N N - Number of Ports
-// 0 0 - 8 (eight)
-// 0 1 - 4 (four)
-// 1 0 - 12 (twelve)
-// 1 1 - 16 (sixteen)
-// =++++++++++++++++++++++++++++++++++
-// L - LCD Display Module Present
-// 0 - No
-// 1 - LCD module present
-// =========+++++++++++++++++++++++++++++++++++++
-// S S S - Async Signals Supported Designator
-// 0 0 0 - 8dss, Mod DCE DB25 Female
-// 0 0 1 - 6dss, RJ-45
-// 0 1 0 - RS-232/422 dss, DB25 Female
-// 0 1 1 - RS-232/422 dss, separate 232/422 DB25 Female
-// 1 0 0 - 6dss, 921.6 I/F with ST654's
-// 1 0 1 - RS-423/232 8dss, RJ-45 10Pin
-// 1 1 0 - 6dss, Mod DCE DB25 Female
-// 1 1 1 - NO BOX PRESENT
-
-#define FF(c) ((c & 0xC0) >> 6)
-#define NN(c) ((c & 0x30) >> 4)
-#define L(c) ((c & 0x08) >> 3)
-#define SSS(c) (c & 0x07)
-
-#define BID_HAS_654(x) (SSS(x) == 0x04)
-#define BID_NO_BOX 0xff /* no box */
-#define BID_8PORT 0x80 /* IP2-8 port */
-#define BID_4PORT 0x81 /* IP2-4 port */
-#define BID_EXP_MASK 0x30 /* IP2-EX */
-#define BID_EXP_8PORT 0x00 /* 8, */
-#define BID_EXP_4PORT 0x10 /* 4, */
-#define BID_EXP_UNDEF 0x20 /* UNDEF, */
-#define BID_EXP_16PORT 0x30 /* 16, */
-#define BID_LCD_CTRL 0x08 /* LCD Controller */
-#define BID_LCD_NONE 0x00 /* - no controller present */
-#define BID_LCD_PRES 0x08 /* - controller present */
-#define BID_CON_MASK 0x07 /* - connector pinouts */
-#define BID_CON_DB25 0x00 /* - DB-25 F */
-#define BID_CON_RJ45 0x01 /* - rj45 */
-
-//------------------------------------------------------------------------------
-// i2eBordStr
-//
-// This structure contains all the information the ELLIS routines require in
-// dealing with a particular board.
-//------------------------------------------------------------------------------
-// There are some queues here which are guaranteed to never contain the entry
-// for a single channel twice. So they must be slightly larger to allow
-// unambiguous full/empty management
-//
-#define CH_QUEUE_SIZE ABS_MOST_PORTS+2
-
-typedef struct _i2eBordStr
-{
- porStr i2ePom; // Structure containing the power-on message.
-
- unsigned short i2ePomSize;
- // The number of bytes actually read if
- // different from sizeof i2ePom, indicates
- // there is an error!
-
- unsigned short i2eStartMail;
- // Contains whatever inbound mailbox data
- // present at startup. NO_MAIL_HERE indicates
- // nothing was present. No special
- // significance as of this writing, but may be
- // useful for diagnostic reasons.
-
- unsigned short i2eValid;
- // Indicates validity of the structure; if
- // i2eValid == I2E_MAGIC, then we can trust
- // the other fields. Some (especially
- // initialization) functions are good about
- // checking for validity. Many functions do
- // not, it being assumed that the larger
- // context assures we are using a valid
- // i2eBordStrPtr.
-
- unsigned short i2eError;
- // Used for returning an error condition from
- // several functions which use i2eBordStrPtr
- // as an argument.
-
- // Accelerators to characterize separate features of a board, derived from a
- // number of sources.
-
- unsigned short i2eFifoSize;
- // Always, the size of the FIFO. For
- // IntelliPort-II, always the same, for -IIEX
- // taken from the Power-On reset message.
-
- volatile
- unsigned short i2eFifoRemains;
- // Used during normal operation to indicate a
- // lower bound on the amount of data which
- // might be in the outbound fifo.
-
- unsigned char i2eFifoStyle;
- // Accelerator which tells which style (-II or
- // -IIEX) FIFO we are using.
-
- unsigned char i2eDataWidth16;
- // Accelerator which tells whether we should
- // do 8 or 16-bit data transfers.
-
- unsigned char i2eMaxIrq;
- // The highest allowable IRQ, based on the
- // slot size.
-
- // Accelerators for various addresses on the board
- int i2eBase; // I/O Address of the Board
- int i2eData; // From here data transfers happen
- int i2eStatus; // From here status reads happen
- int i2ePointer; // (IntelliPort-II: pointer/commands)
- int i2eXMail; // (IntelliPOrt-IIEX: mailboxes
- int i2eXMask; // (IntelliPort-IIEX: mask write
-
- //-------------------------------------------------------
- // Information presented in a common format across boards
- // For each box, bit map of the channels present. Box closest to
- // the host is box 0. LSB is channel 0. IntelliPort-II (non-expandable)
- // is taken to be box 0. These are derived from product i.d. registers.
-
- unsigned short i2eChannelMap[ABS_MAX_BOXES];
-
- // Same as above, except each is derived from firmware attempting to detect
- // the uart presence (by reading a valid GFRCR register). If bits are set in
- // i2eChannelMap and not in i2eGoodMap, there is a potential problem.
-
- unsigned short i2eGoodMap[ABS_MAX_BOXES];
-
- // ---------------------------
- // For indirect function calls
-
- // Routine to cause an N-millisecond delay: Patched by the ii2Initialize
- // function.
-
- void (*i2eDelay)(unsigned int);
-
- // Routine to write N bytes to the board through the FIFO. Returns true if
- // all copacetic, otherwise returns false and error is in i2eError field.
- // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER.
-
- int (*i2eWriteBuf)(struct _i2eBordStr *, unsigned char *, int);
-
- // Routine to read N bytes from the board through the FIFO. Returns true if
- // copacetic, otherwise returns false and error in i2eError.
- // IF COUNT IS ODD, ROUNDS UP TO THE NEXT EVEN NUMBER.
-
- int (*i2eReadBuf)(struct _i2eBordStr *, unsigned char *, int);
-
- // Returns a word from FIFO. Will use 2 byte operations if needed.
-
- unsigned short (*i2eReadWord)(struct _i2eBordStr *);
-
- // Writes a word to FIFO. Will use 2 byte operations if needed.
-
- void (*i2eWriteWord)(struct _i2eBordStr *, unsigned short);
-
- // Waits specified time for the Transmit FIFO to go empty. Returns true if
- // ok, otherwise returns false and error in i2eError.
-
- int (*i2eWaitForTxEmpty)(struct _i2eBordStr *, int);
-
- // Returns true or false according to whether the outgoing mailbox is empty.
-
- int (*i2eTxMailEmpty)(struct _i2eBordStr *);
-
- // Checks whether outgoing mailbox is empty. If so, sends mail and returns
- // true. Otherwise returns false.
-
- int (*i2eTrySendMail)(struct _i2eBordStr *, unsigned char);
-
- // If no mail available, returns NO_MAIL_HERE, else returns the value in the
- // mailbox (guaranteed can't be NO_MAIL_HERE).
-
- unsigned short (*i2eGetMail)(struct _i2eBordStr *);
-
- // Enables the board to interrupt the host when it writes to the mailbox.
- // Irqs will not occur, however, until the loadware separately enables
- // interrupt generation to the host. The standard loadware does this in
- // response to a command packet sent by the host. (Also, disables
- // any other potential interrupt sources from the board -- other than the
- // inbound mailbox).
-
- void (*i2eEnableMailIrq)(struct _i2eBordStr *);
-
- // Writes an arbitrary value to the mask register.
-
- void (*i2eWriteMask)(struct _i2eBordStr *, unsigned char);
-
-
- // State information
-
- // During downloading, indicates the number of blocks remaining to download
- // to the board.
-
- short i2eToLoad;
-
- // State of board (see manifests below) (e.g., whether in reset condition,
- // whether standard loadware is installed, etc.
-
- unsigned char i2eState;
-
- // These three fields are only valid when there is loadware running on the
- // board. (i2eState == II_STATE_LOADED or i2eState == II_STATE_STDLOADED )
-
- unsigned char i2eLVersion; // Loadware version
- unsigned char i2eLRevision; // Loadware revision
- unsigned char i2eLSub; // Loadware subrevision
-
- // Flags which only have meaning in the context of the standard loadware.
- // Somewhat violates the layering concept, but there is so little additional
- // needed at the board level (while much additional at the channel level),
- // that this beats maintaining two different per-board structures.
-
- // Indicates which IRQ the board has been initialized (from software) to use
- // For MicroChannel boards, any value different from IRQ_UNDEFINED means
- // that the software command has been sent to enable interrupts (or specify
- // they are disabled). Special value: IRQ_UNDEFINED indicates that the
- // software command to select the interrupt has not yet been sent, therefore
- // (since the standard loadware insists that it be sent before any other
- // packets are sent) no other packets should be sent yet.
-
- unsigned short i2eUsingIrq;
-
- // This is set when we hit the MB_OUT_STUFFED mailbox, which prevents us
- // putting more in the mailbox until an appropriate mailbox message is
- // received.
-
- unsigned char i2eWaitingForEmptyFifo;
-
- // Any mailbox bits waiting to be sent to the board are OR'ed in here.
-
- unsigned char i2eOutMailWaiting;
-
- // The head of any incoming packet is read into here, is then examined and
- // we dispatch accordingly.
-
- unsigned short i2eLeadoffWord[1];
-
- // Running counter of interrupts where the mailbox indicated incoming data.
-
- unsigned short i2eFifoInInts;
-
- // Running counter of interrupts where the mailbox indicated outgoing data
- // had been stripped.
-
- unsigned short i2eFifoOutInts;
-
- // If not void, gives the address of a routine to call if fatal board error
- // is found (only applies to standard l/w).
-
- void (*i2eFatalTrap)(struct _i2eBordStr *);
-
- // Will point to an array of some sort of channel structures (whose format
- // is unknown at this level, being a function of what loadware is
- // installed and the code configuration (max sizes of buffers, etc.)).
-
- void *i2eChannelPtr;
-
- // Set indicates that the board has gone fatal.
-
- unsigned short i2eFatal;
-
- // The number of elements pointed to by i2eChannelPtr.
-
- unsigned short i2eChannelCnt;
-
- // Ring-buffers of channel structures whose channels have particular needs.
-
- rwlock_t Fbuf_spinlock;
- volatile
- unsigned short i2Fbuf_strip; // Strip index
- volatile
- unsigned short i2Fbuf_stuff; // Stuff index
- void *i2Fbuf[CH_QUEUE_SIZE]; // An array of channel pointers
- // of channels who need to send
- // flow control packets.
- rwlock_t Dbuf_spinlock;
- volatile
- unsigned short i2Dbuf_strip; // Strip index
- volatile
- unsigned short i2Dbuf_stuff; // Stuff index
- void *i2Dbuf[CH_QUEUE_SIZE]; // An array of channel pointers
- // of channels who need to send
- // data or in-line command packets.
- rwlock_t Bbuf_spinlock;
- volatile
- unsigned short i2Bbuf_strip; // Strip index
- volatile
- unsigned short i2Bbuf_stuff; // Stuff index
- void *i2Bbuf[CH_QUEUE_SIZE]; // An array of channel pointers
- // of channels who need to send
- // bypass command packets.
-
- /*
- * A set of flags to indicate that certain events have occurred on at least
- * one of the ports on this board. We use this to decide whether to spin
- * through the channels looking for breaks, etc.
- */
- int got_input;
- int status_change;
- bidStat channelBtypes;
-
- /*
- * Debugging counters, etc.
- */
- unsigned long debugFlowQueued;
- unsigned long debugInlineQueued;
- unsigned long debugDataQueued;
- unsigned long debugBypassQueued;
- unsigned long debugFlowCount;
- unsigned long debugInlineCount;
- unsigned long debugBypassCount;
-
- rwlock_t read_fifo_spinlock;
- rwlock_t write_fifo_spinlock;
-
-// For queuing interrupt bottom half handlers. /\/\|=mhw=|\/\/
- struct work_struct tqueue_interrupt;
-
- struct timer_list SendPendingTimer; // Used by iiSendPending
- unsigned int SendPendingRetry;
-} i2eBordStr, *i2eBordStrPtr;
-
-//-------------------------------------------------------------------
-// Macro Definitions for the indirect calls defined in the i2eBordStr
-//-------------------------------------------------------------------
-//
-#define iiDelay(a,b) (*(a)->i2eDelay)(b)
-#define iiWriteBuf(a,b,c) (*(a)->i2eWriteBuf)(a,b,c)
-#define iiReadBuf(a,b,c) (*(a)->i2eReadBuf)(a,b,c)
-
-#define iiWriteWord(a,b) (*(a)->i2eWriteWord)(a,b)
-#define iiReadWord(a) (*(a)->i2eReadWord)(a)
-
-#define iiWaitForTxEmpty(a,b) (*(a)->i2eWaitForTxEmpty)(a,b)
-
-#define iiTxMailEmpty(a) (*(a)->i2eTxMailEmpty)(a)
-#define iiTrySendMail(a,b) (*(a)->i2eTrySendMail)(a,b)
-
-#define iiGetMail(a) (*(a)->i2eGetMail)(a)
-#define iiEnableMailIrq(a) (*(a)->i2eEnableMailIrq)(a)
-#define iiDisableMailIrq(a) (*(a)->i2eWriteMask)(a,0)
-#define iiWriteMask(a,b) (*(a)->i2eWriteMask)(a,b)
-
-//-------------------------------------------
-// Manifests for i2eBordStr:
-//-------------------------------------------
-
-typedef void (*delayFunc_t)(unsigned int);
-
-// i2eValid
-//
-#define I2E_MAGIC 0x4251 // Structure is valid.
-#define I2E_INCOMPLETE 0x1122 // Structure failed during init.
-
-
-// i2eError
-//
-#define I2EE_GOOD 0 // Operation successful
-#define I2EE_BADADDR 1 // Address out of range
-#define I2EE_BADSTATE 2 // Attempt to perform a function when the board
- // structure was in the incorrect state
-#define I2EE_BADMAGIC 3 // Bad magic number from Power On test (i2ePomSize
- // reflects what was read
-#define I2EE_PORM_SHORT 4 // Power On message too short
-#define I2EE_PORM_LONG 5 // Power On message too long
-#define I2EE_BAD_FAMILY 6 // Un-supported board family type
-#define I2EE_INCONSIST 7 // Firmware reports something impossible,
- // e.g. unexpected number of ports... Almost no
- // excuse other than bad FIFO...
-#define I2EE_POSTERR 8 // Power-On self test reported a bad error
-#define I2EE_BADBUS 9 // Unknown Bus type declared in message
-#define I2EE_TXE_TIME 10 // Timed out waiting for TX Fifo to empty
-#define I2EE_INVALID 11 // i2eValid field does not indicate a valid and
- // complete board structure (for functions which
- // require this be so.)
-#define I2EE_BAD_PORT 12 // Discrepancy between channels actually found and
- // what the product is supposed to have. Check
- // i2eGoodMap vs i2eChannelMap for details.
-#define I2EE_BAD_IRQ 13 // Someone specified an unsupported IRQ
-#define I2EE_NOCHANNELS 14 // No channel structures have been defined (for
- // functions requiring this).
-
-// i2eFifoStyle
-//
-#define FIFO_II 0 /* IntelliPort-II style: see also i2hw.h */
-#define FIFO_IIEX 1 /* IntelliPort-IIEX style */
-
-// i2eGetMail
-//
-#define NO_MAIL_HERE 0x1111 // Since mail is unsigned char, cannot possibly
- // promote to 0x1111.
-// i2eState
-//
-#define II_STATE_COLD 0 // Addresses have been defined, but board not even
- // reset yet.
-#define II_STATE_RESET 1 // Board,if it exists, has just been reset
-#define II_STATE_READY 2 // Board ready for its first block
-#define II_STATE_LOADING 3 // Board continuing load
-#define II_STATE_LOADED 4 // Board has finished load: status ok
-#define II_STATE_BADLOAD 5 // Board has finished load: failed!
-#define II_STATE_STDLOADED 6 // Board has finished load: standard firmware
-
-// i2eUsingIrq
-//
-#define I2_IRQ_UNDEFINED 0x1352 /* No valid irq (or polling = 0) can
- * ever promote to this! */
-//------------------------------------------
-// Handy Macros for i2ellis.c and others
-// Note these are common to -II and -IIEX
-//------------------------------------------
-
-// Given a pointer to the board structure, does the input FIFO have any data or
-// not?
-//
-#define I2_HAS_INPUT(pB) !(inb(pB->i2eStatus) & ST_IN_EMPTY)
-
-// Given a pointer to the board structure, is there anything in the incoming
-// mailbox?
-//
-#define I2_HAS_MAIL(pB) (inb(pB->i2eStatus) & ST_IN_MAIL)
-
-#define I2_UPDATE_FIFO_ROOM(pB) ((pB)->i2eFifoRemains = (pB)->i2eFifoSize)
-
-//------------------------------------------
-// Function Declarations for i2ellis.c
-//------------------------------------------
-//
-// Functions called directly
-//
-// Initialization of a board & structure is in four (five!) parts:
-//
-// 1) iiSetAddress() - Define the board address & delay function for a board.
-// 2) iiReset() - Reset the board (provided it exists)
-// -- Note you may do this to several boards --
-// 3) iiResetDelay() - Delay for 2 seconds (once for all boards)
-// 4) iiInitialize() - Attempt to read Power-up message; further initialize
-// accelerators
-//
-// Then you may use iiDownloadAll() or iiDownloadFile() (in i2file.c) to write
-// loadware. To change loadware, you must begin again with step 2, resetting
-// the board again (step 1 not needed).
-
-static int iiSetAddress(i2eBordStrPtr, int, delayFunc_t );
-static int iiReset(i2eBordStrPtr);
-static int iiResetDelay(i2eBordStrPtr);
-static int iiInitialize(i2eBordStrPtr);
-
-// Routine to validate that all channels expected are there.
-//
-extern int iiValidateChannels(i2eBordStrPtr);
-
-// Routine used to download a block of loadware.
-//
-static int iiDownloadBlock(i2eBordStrPtr, loadHdrStrPtr, int);
-
-// Return values given by iiDownloadBlock, iiDownloadAll, iiDownloadFile:
-//
-#define II_DOWN_BADVALID 0 // board structure is invalid
-#define II_DOWN_CONTINUING 1 // So far, so good, firmware expects more
-#define II_DOWN_GOOD 2 // Download complete, CRC good
-#define II_DOWN_BAD 3 // Download complete, but CRC bad
-#define II_DOWN_BADFILE 4 // Bad magic number in loadware file
-#define II_DOWN_BADSTATE 5 // Board is in an inappropriate state for
- // downloading loadware. (see i2eState)
-#define II_DOWN_TIMEOUT 6 // Timeout waiting for firmware
-#define II_DOWN_OVER 7 // Too much data
-#define II_DOWN_UNDER 8 // Not enough data
-#define II_DOWN_NOFILE 9 // Loadware file not found
-
-// Routine to download an entire loadware module: Return values are a subset of
-// iiDownloadBlock's, excluding, of course, II_DOWN_CONTINUING
-//
-static int iiDownloadAll(i2eBordStrPtr, loadHdrStrPtr, int, int);
-
-// Many functions defined here return True if good, False otherwise, with an
-// error code in i2eError field. Here is a handy macro for setting the error
-// code and returning.
-//
-#define I2_COMPLETE(pB,code) do { \
- pB->i2eError = code; \
- return (code == I2EE_GOOD);\
- } while (0)
-
-#endif // I2ELLIS_H
diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h
deleted file mode 100644
index c0ba6c0..0000000
--- a/drivers/char/ip2/i2hw.h
+++ /dev/null
@@ -1,652 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Definitions limited to properties of the hardware or the
-* bootstrap firmware. As such, they are applicable regardless of
-* operating system or loadware (standard or diagnostic).
-*
-*******************************************************************************/
-#ifndef I2HW_H
-#define I2HW_H 1
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 23 September 1991 MAG First Draft Started...through...
-// 11 October 1991 ... Continuing development...
-// 6 August 1993 Added support for ISA-4 (asic) which is architected
-// as an ISA-CEX with a single 4-port box.
-//
-// 20 December 1996 AKM Version for Linux
-//
-//------------------------------------------------------------------------------
-/*------------------------------------------------------------------------------
-
-HARDWARE DESCRIPTION:
-
-Introduction:
-
-The IntelliPort-II and IntelliPort-IIEX products occupy a block of eight (8)
-addresses in the host's I/O space.
-
-Some addresses are used to transfer data to/from the board, some to transfer
-so-called "mailbox" messages, and some to read bit-mapped status information.
-While all the products in the line are functionally similar, some use a 16-bit
-data path to transfer data while others use an 8-bit path. Also, the use of
-command /status/mailbox registers differs slightly between the II and IIEX
-branches of the family.
-
-The host determines what type of board it is dealing with by reading a string of
-sixteen characters from the board. These characters are always placed in the
-fifo by the board's local processor whenever the board is reset (either from
-power-on or under software control) and are known as the "Power-on Reset
-Message." In order that this message can be read from either type of board, the
-hardware registers used in reading this message are the same. Once this message
-has been read by the host, then it has the information required to operate.
-
-General Differences between boards:
-
-The greatest structural difference is between the -II and -IIEX families of
-product. The -II boards use the Am4701 dual 512x8 bidirectional fifo to support
-the data path, mailbox registers, and status registers. This chip contains some
-features which are not used in the IntelliPort-II products; a description of
-these is omitted here. Because of these many features, it contains many
-registers, too many to access directly within a small address space. They are
-accessed by first writing a value to a "pointer" register. This value selects
-the register to be accessed. The next read or write to that address accesses
-the selected register rather than the pointer register.
-
-The -IIEX boards use a proprietary design similar to the Am4701 in function. But
-because of a simpler, more streamlined design it doesn't require so many
-registers. This means they can be accessed directly in single operations rather
-than through a pointer register.
-
-Besides these differences, there are differences in whether 8-bit or 16-bit
-transfers are used to move data to the board.
-
-The -II boards are capable only of 8-bit data transfers, while the -IIEX boards
-may be configured for either 8-bit or 16-bit data transfers. If the on-board DIP
-switch #8 is ON, and the card has been installed in a 16-bit slot, 16-bit
-transfers are supported (and will be expected by the standard loadware). The
-on-board firmware can determine the position of the switch, and whether the
-board is installed in a 16-bit slot; it supplies this information to the host as
-part of the power-up reset message.
-
-The configuration switch (#8) and slot selection do not directly configure the
-hardware. It is up to the on-board loadware and host-based drivers to act
-according to the selected options. That is, loadware and drivers could be
-written to perform 8-bit transfers regardless of the state of the DIP switch or
-slot (and in a diagnostic environment might well do so). Likewise, 16-bit
-transfers could be performed as long as the card is in a 16-bit slot.
-
-Note the slot selection and DIP switch selection are provided separately: a
-board running in 8-bit mode in a 16-bit slot has a greater range of possible
-interrupts to choose from; information of potential use to the host.
-
-All 8-bit data transfers are done in the same way, regardless of whether on a
--II board or a -IIEX board.
-
-The host must consider two things then: 1) whether a -II or -IIEX product is
-being used, and 2) whether an 8-bit or 16-bit data path is used.
-
-A further difference is that -II boards always have a 512-byte fifo operating in
-each direction. -IIEX boards may use fifos of varying size; this size is
-reported as part of the power-up message.
-
-I/O Map Of IntelliPort-II and IntelliPort-IIEX boards:
-(Relative to the chosen base address)
-
-Addr R/W IntelliPort-II IntelliPort-IIEX
----- --- -------------- ----------------
-0 R/W Data Port (byte) Data Port (byte or word)
-1 R/W (Not used) (MSB of word-wide data written to Data Port)
-2 R Status Register Status Register
-2 W Pointer Register Interrupt Mask Register
-3 R/W (Not used) Mailbox Registers (6 bits: 11111100)
-4,5 -- Reserved for future products
-6 -- Reserved for future products
-7 R Guaranteed to have no effect
-7 W Hardware reset of board.
-
-
-Rules:
-All data transfers are performed using the even i/o address. If byte-wide data
-transfers are being used, do INB/OUTB operations on the data port. If word-wide
-transfers are used, do INW/OUTW operations. In some circumstances (such as
-reading the power-up message) you will do INB from the data port, but in this
-case the MSB of each word read is lost. When accessing all other unreserved
-registers, use byte operations only.
-------------------------------------------------------------------------------*/
-
-//------------------------------------------------
-// Mandatory Includes:
-//------------------------------------------------
-//
-#include "ip2types.h"
-
-//-------------------------------------------------------------------------
-// Manifests for the I/O map:
-//-------------------------------------------------------------------------
-// R/W: Data port (byte) for IntelliPort-II,
-// R/W: Data port (byte or word) for IntelliPort-IIEX
-// Incoming or outgoing data passes through a FIFO, the status of which is
-// available in some of the bits in FIFO_STATUS. This (bidirectional) FIFO is
-// the primary means of transferring data, commands, flow-control, and status
-// information between the host and board.
-//
-#define FIFO_DATA 0
-
-// Another way of passing information between the board and the host is
-// through "mailboxes". Unlike a FIFO, a mailbox holds only a single byte of
-// data. Writing data to the mailbox causes a status bit to be set, and
-// potentially interrupting the intended receiver. The sender has some way to
-// determine whether the data has been read yet; as soon as it has, it may send
-// more. The mailboxes are handled differently on -II and -IIEX products, as
-// suggested below.
-//------------------------------------------------------------------------------
-// Read: Status Register for IntelliPort-II or -IIEX
-// The presence of any bit set here will cause an interrupt to the host,
-// provided the corresponding bit has been unmasked in the interrupt mask
-// register. Furthermore, interrupts to the host are disabled globally until the
-// loadware selects the irq line to use. With the exception of STN_MR, the bits
-// remain set so long as the associated condition is true.
-//
-#define FIFO_STATUS 2
-
-// Bit map of status bits which are identical for -II and -IIEX
-//
-#define ST_OUT_FULL 0x40 // Outbound FIFO full
-#define ST_IN_EMPTY 0x20 // Inbound FIFO empty
-#define ST_IN_MAIL 0x04 // Inbound Mailbox full
-
-// The following exists only on the Intelliport-IIEX, and indicates that the
-// board has not read the last outgoing mailbox data yet. In the IntelliPort-II,
-// the outgoing mailbox may be read back: a zero indicates the board has read
-// the data.
-//
-#define STE_OUT_MAIL 0x80 // Outbound mailbox full (!)
-
-// The following bits are defined differently for -II and -IIEX boards. Code
-// which relies on these bits will need to be functionally different for the two
-// types of boards and should be generally avoided because of the additional
-// complexity this creates:
-
-// Bit map of status bits only on -II
-
-// Fifo has been RESET (cleared when the status register is read). Note that
-// this condition cannot be masked and would always interrupt the host, except
-// that the hardware reset also disables interrupts globally from the board
-// until re-enabled by loadware. This could also arise from the
-// Am4701-supported command to reset the chip, but this command is generally not
-// used here.
-//
-#define STN_MR 0x80
-
-// See the AMD Am4701 data sheet for details on the following four bits. They
-// are not presently used by Computone drivers.
-//
-#define STN_OUT_AF 0x10 // Outbound FIFO almost full (programmable)
-#define STN_IN_AE 0x08 // Inbound FIFO almost empty (programmable)
-#define STN_BD 0x02 // Inbound byte detected
-#define STN_PE 0x01 // Parity/Framing condition detected
-
-// Bit-map of status bits only on -IIEX
-//
-#define STE_OUT_HF 0x10 // Outbound FIFO half full
-#define STE_IN_HF 0x08 // Inbound FIFO half full
-#define STE_IN_FULL 0x02 // Inbound FIFO full
-#define STE_OUT_MT 0x01 // Outbound FIFO empty
-
-//------------------------------------------------------------------------------
-
-// Intelliport-II -- Write Only: the pointer register.
-// Values are written to this register to select the Am4701 internal register to
-// be accessed on the next operation.
-//
-#define FIFO_PTR 0x02
-
-// Values for the pointer register
-//
-#define SEL_COMMAND 0x1 // Selects the Am4701 command register
-
-// Some possible commands:
-//
-#define SEL_CMD_MR 0x80 // Am4701 command to reset the chip
-#define SEL_CMD_SH 0x40 // Am4701 command to map the "other" port into the
- // status register.
-#define SEL_CMD_UNSH 0 // Am4701 command to "unshift": port maps into its
- // own status register.
-#define SEL_MASK 0x2 // Selects the Am4701 interrupt mask register. The
- // interrupt mask register is bit-mapped to match
- // the status register (FIFO_STATUS) except for
- // STN_MR. (See above.)
-#define SEL_BYTE_DET 0x3 // Selects the Am4701 byte-detect register. (Not
- // normally used except in diagnostics.)
-#define SEL_OUTMAIL 0x4 // Selects the outbound mailbox (R/W). Reading back
- // a value of zero indicates that the mailbox has
- // been read by the board and is available for more
- // data./ Writing to the mailbox optionally
- // interrupts the board, depending on the loadware's
- // setting of its interrupt mask register.
-#define SEL_AEAF 0x5 // Selects AE/AF threshold register.
-#define SEL_INMAIL 0x6 // Selects the inbound mailbox (Read)
-
-//------------------------------------------------------------------------------
-// IntelliPort-IIEX -- Write Only: interrupt mask (and misc flags) register:
-// Unlike IntelliPort-II, bit assignments do NOT match those of the status
-// register.
-//
-#define FIFO_MASK 0x2
-
-// Mailbox readback select:
-// If set, reads to FIFO_MAIL will read the OUTBOUND mailbox (host to board). If
-// clear (default on reset) reads to FIFO_MAIL will read the INBOUND mailbox.
-// This is the normal situation. The clearing of a mailbox is determined on
-// -IIEX boards by waiting for the STE_OUT_MAIL bit to clear. Readback
-// capability is provided for diagnostic purposes only.
-//
-#define MX_OUTMAIL_RSEL 0x80
-
-#define MX_IN_MAIL 0x40 // Enables interrupts when incoming mailbox goes
- // full (ST_IN_MAIL set).
-#define MX_IN_FULL 0x20 // Enables interrupts when incoming FIFO goes full
- // (STE_IN_FULL).
-#define MX_IN_MT 0x08 // Enables interrupts when incoming FIFO goes empty
- // (ST_IN_MT).
-#define MX_OUT_FULL 0x04 // Enables interrupts when outgoing FIFO goes full
- // (ST_OUT_FULL).
-#define MX_OUT_MT 0x01 // Enables interrupts when outgoing FIFO goes empty
- // (STE_OUT_MT).
-
-// Any remaining bits are reserved, and should be written to ZERO for
-// compatibility with future Computone products.
-
-//------------------------------------------------------------------------------
-// IntelliPort-IIEX: -- These are only 6-bit mailboxes !!! -- 11111100 (low two
-// bits always read back 0).
-// Read: One of the mailboxes, usually Inbound.
-// Inbound Mailbox (MX_OUTMAIL_RSEL = 0)
-// Outbound Mailbox (MX_OUTMAIL_RSEL = 1)
-// Write: Outbound Mailbox
-// For the IntelliPort-II boards, the outbound mailbox is read back to determine
-// whether the board has read the data (0 --> data has been read). For the
-// IntelliPort-IIEX, this is done by reading a status register. To determine
-// whether mailbox is available for more outbound data, use the STE_OUT_MAIL bit
-// in FIFO_STATUS. Moreover, although the Outbound Mailbox can be read back by
-// setting MX_OUTMAIL_RSEL, it is NOT cleared when the board reads it, as is the
-// case with the -II boards. For this reason, FIFO_MAIL is normally used to read
-// the inbound FIFO, and MX_OUTMAIL_RSEL kept clear. (See above for
-// MX_OUTMAIL_RSEL description.)
-//
-#define FIFO_MAIL 0x3
-
-//------------------------------------------------------------------------------
-// WRITE ONLY: Resets the board. (Data doesn't matter).
-//
-#define FIFO_RESET 0x7
-
-//------------------------------------------------------------------------------
-// READ ONLY: Will have no effect. (Data is undefined.)
-// Actually, there will be an effect, in that the operation is sure to generate
-// a bus cycle: viz., an I/O byte Read. This fact can be used to enforce short
-// delays when no comparable time constant is available.
-//
-#define FIFO_NOP 0x7
-
-//------------------------------------------------------------------------------
-// RESET & POWER-ON RESET MESSAGE
-/*------------------------------------------------------------------------------
-RESET:
-
-The IntelliPort-II and -IIEX boards are reset in three ways: Power-up, channel
-reset, and via a write to the reset register described above. For products using
-the ISA bus, these three sources of reset are equvalent. For MCA and EISA buses,
-the Power-up and channel reset sources cause additional hardware initialization
-which should only occur at system startup time.
-
-The third type of reset, called a "command reset", is done by writing any data
-to the FIFO_RESET address described above. This resets the on-board processor,
-FIFO, UARTS, and associated hardware.
-
-This passes control of the board to the bootstrap firmware, which performs a
-Power-On Self Test and which detects its current configuration. For example,
--IIEX products determine the size of FIFO which has been installed, and the
-number and type of expansion boxes attached.
-
-This and other information is then written to the FIFO in a 16-byte data block
-to be read by the host. This block is guaranteed to be present within two (2)
-seconds of having received the command reset. The firmware is now ready to
-receive loadware from the host.
-
-It is good practice to perform a command reset to the board explicitly as part
-of your software initialization. This allows your code to properly restart from
-a soft boot. (Many systems do not issue channel reset on soft boot).
-
-Because of a hardware reset problem on some of the Cirrus Logic 1400's which are
-used on the product, it is recommended that you reset the board twice, separated
-by an approximately 50 milliseconds delay. (VERY approximately: probably ok to
-be off by a factor of five. The important point is that the first command reset
-in fact generates a reset pulse on the board. This pulse is guaranteed to last
-less than 10 milliseconds. The additional delay ensures the 1400 has had the
-chance to respond sufficiently to the first reset. Why not a longer delay? Much
-more than 50 milliseconds gets to be noticable, but the board would still work.
-
-Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap
-firmware is ready to receive loadware.
-
-Note on Power-on Reset Message format:
-The various fields have been designed with future expansion in view.
-Combinations of bitfields and values have been defined which define products
-which may not currently exist. This has been done to allow drivers to anticipate
-the possible introduction of products in a systematic fashion. This is not
-intended to suggest that each potential product is actually under consideration.
-------------------------------------------------------------------------------*/
-
-//----------------------------------------
-// Format of Power-on Reset Message
-//----------------------------------------
-
-typedef union _porStr // "por" stands for Power On Reset
-{
- unsigned char c[16]; // array used when considering the message as a
- // string of undifferentiated characters
-
- struct // Elements used when considering values
- {
- // The first two bytes out of the FIFO are two magic numbers. These are
- // intended to establish that there is indeed a member of the
- // IntelliPort-II(EX) family present. The remaining bytes may be
- // expected // to be valid. When reading the Power-on Reset message,
- // if the magic numbers do not match it is probably best to stop
- // reading immediately. You are certainly not reading our board (unless
- // hardware is faulty), and may in fact be reading some other piece of
- // hardware.
-
- unsigned char porMagic1; // magic number: first byte == POR_MAGIC_1
- unsigned char porMagic2; // magic number: second byte == POR_MAGIC_2
-
- // The Version, Revision, and Subrevision are stored as absolute numbers
- // and would normally be displayed in the format V.R.S (e.g. 1.0.2)
-
- unsigned char porVersion; // Bootstrap firmware version number
- unsigned char porRevision; // Bootstrap firmware revision number
- unsigned char porSubRev; // Bootstrap firmware sub-revision number
-
- unsigned char porID; // Product ID: Bit-mapped according to
- // conventions described below. Among other
- // things, this allows us to distinguish
- // IntelliPort-II boards from IntelliPort-IIEX
- // boards.
-
- unsigned char porBus; // IntelliPort-II: Unused
- // IntelliPort-IIEX: Bus Information:
- // Bit-mapped below
-
- unsigned char porMemory; // On-board DRAM size: in 32k blocks
-
- // porPorts1 (and porPorts2) are used to determine the ports which are
- // available to the board. For non-expandable product, a single number
- // is sufficient. For expandable product, the board may be connected
- // to as many as four boxes. Each box may be (so far) either a 16-port
- // or an 8-port size. Whenever an 8-port box is used, the remaining 8
- // ports leave gaps between existing channels. For that reason,
- // expandable products must report a MAP of available channels. Since
- // each UART supports four ports, we represent each UART found by a
- // single bit. Using two bytes to supply the mapping information we
- // report the presense or absense of up to 16 UARTS, or 64 ports in
- // steps of 4 ports. For -IIEX products, the ports are numbered
- // starting at the box closest to the controller in the "chain".
-
- // Interpreted Differently for IntelliPort-II and -IIEX.
- // -II: Number of ports (Derived actually from product ID). See
- // Diag1&2 to indicate if uart was actually detected.
- // -IIEX: Bit-map of UARTS found, LSB (see below for MSB of this). This
- // bitmap is based on detecting the uarts themselves;
- // see porFlags for information from the box i.d's.
- unsigned char porPorts1;
-
- unsigned char porDiag1; // Results of on-board P.O.S.T, 1st byte
- unsigned char porDiag2; // Results of on-board P.O.S.T, 2nd byte
- unsigned char porSpeed; // Speed of local CPU: given as MHz x10
- // e.g., 16.0 MHz CPU is reported as 160
- unsigned char porFlags; // Misc information (see manifests below)
- // Bit-mapped: CPU type, UART's present
-
- unsigned char porPorts2; // -II: Undefined
- // -IIEX: Bit-map of UARTS found, MSB (see
- // above for LSB)
-
- // IntelliPort-II: undefined
- // IntelliPort-IIEX: 1 << porFifoSize gives the size, in bytes, of the
- // host interface FIFO, in each direction. When running the -IIEX in
- // 8-bit mode, fifo capacity is halved. The bootstrap firmware will
- // have already accounted for this fact in generating this number.
- unsigned char porFifoSize;
-
- // IntelliPort-II: undefined
- // IntelliPort-IIEX: The number of boxes connected. (Presently 1-4)
- unsigned char porNumBoxes;
- } e;
-} porStr, *porStrPtr;
-
-//--------------------------
-// Values for porStr fields
-//--------------------------
-
-//---------------------
-// porMagic1, porMagic2
-//----------------------
-//
-#define POR_MAGIC_1 0x96 // The only valid value for porMagic1
-#define POR_MAGIC_2 0x35 // The only valid value for porMagic2
-#define POR_1_INDEX 0 // Byte position of POR_MAGIC_1
-#define POR_2_INDEX 1 // Ditto for POR_MAGIC_2
-
-//----------------------
-// porID
-//----------------------
-//
-#define POR_ID_FAMILY 0xc0 // These bits indicate the general family of
- // product.
-#define POR_ID_FII 0x00 // Family is "IntelliPort-II"
-#define POR_ID_FIIEX 0x40 // Family is "IntelliPort-IIEX"
-
-// These bits are reserved, presently zero. May be used at a later date to
-// convey other product information.
-//
-#define POR_ID_RESERVED 0x3c
-
-#define POR_ID_SIZE 0x03 // Remaining bits indicate number of ports &
- // Connector information.
-#define POR_ID_II_8 0x00 // For IntelliPort-II, indicates 8-port using
- // standard brick.
-#define POR_ID_II_8R 0x01 // For IntelliPort-II, indicates 8-port using
- // RJ11's (no CTS)
-#define POR_ID_II_6 0x02 // For IntelliPort-II, indicates 6-port using
- // RJ45's
-#define POR_ID_II_4 0x03 // For IntelliPort-II, indicates 4-port using
- // 4xRJ45 connectors
-#define POR_ID_EX 0x00 // For IntelliPort-IIEX, indicates standard
- // expandable controller (other values reserved)
-
-//----------------------
-// porBus
-//----------------------
-
-// IntelliPort-IIEX only: Board is installed in a 16-bit slot
-//
-#define POR_BUS_SLOT16 0x20
-
-// IntelliPort-IIEX only: DIP switch #8 is on, selecting 16-bit host interface
-// operation.
-//
-#define POR_BUS_DIP16 0x10
-
-// Bits 0-2 indicate type of bus: This information is stored in the bootstrap
-// loadware, different loadware being used on different products for different
-// buses. For most situations, the drivers do not need this information; but it
-// is handy in a diagnostic environment. For example, on microchannel boards,
-// you would not want to try to test several interrupts, only the one for which
-// you were configured.
-//
-#define POR_BUS_TYPE 0x07
-
-// Unknown: this product doesn't know what bus it is running in. (e.g. if same
-// bootstrap firmware were wanted for two different buses.)
-//
-#define POR_BUS_T_UNK 0
-
-// Note: existing firmware for ISA-8 and MC-8 currently report the POR_BUS_T_UNK
-// state, since the same bootstrap firmware is used for each.
-
-#define POR_BUS_T_MCA 1 // MCA BUS */
-#define POR_BUS_T_EISA 2 // EISA BUS */
-#define POR_BUS_T_ISA 3 // ISA BUS */
-
-// Values 4-7 Reserved
-
-// Remaining bits are reserved
-
-//----------------------
-// porDiag1
-//----------------------
-
-#define POR_BAD_MAPPER 0x80 // HW failure on P.O.S.T: Chip mapper failed
-
-// These two bits valid only for the IntelliPort-II
-//
-#define POR_BAD_UART1 0x01 // First 1400 bad
-#define POR_BAD_UART2 0x02 // Second 1400 bad
-
-//----------------------
-// porDiag2
-//----------------------
-
-#define POR_DEBUG_PORT 0x80 // debug port was detected by the P.O.S.T
-#define POR_DIAG_OK 0x00 // Indicates passage: Failure codes not yet
- // available.
- // Other bits undefined.
-//----------------------
-// porFlags
-//----------------------
-
-#define POR_CPU 0x03 // These bits indicate supposed CPU type
-#define POR_CPU_8 0x01 // Board uses an 80188 (no such thing yet)
-#define POR_CPU_6 0x02 // Board uses an 80186 (all existing products)
-#define POR_CEX4 0x04 // If set, this is an ISA-CEX/4: An ISA-4 (asic)
- // which is architected like an ISA-CEX connected
- // to a (hitherto impossible) 4-port box.
-#define POR_BOXES 0xf0 // Valid for IntelliPort-IIEX only: Map of Box
- // sizes based on box I.D.
-#define POR_BOX_16 0x10 // Set indicates 16-port, clear 8-port
-
-//-------------------------------------
-// LOADWARE and DOWNLOADING CODE
-//-------------------------------------
-
-/*
-Loadware may be sent to the board in two ways:
-1) It may be read from a (binary image) data file block by block as each block
- is sent to the board. This is only possible when the initialization is
- performed by code which can access your file system. This is most suitable
- for diagnostics and appications which use the interface library directly.
-
-2) It may be hard-coded into your source by including a .h file (typically
- supplied by Computone), which declares a data array and initializes every
- element. This achieves the same result as if an entire loadware file had
- been read into the array.
-
- This requires more data space in your program, but access to the file system
- is not required. This method is more suited to driver code, which typically
- is running at a level too low to access the file system directly.
-
-At present, loadware can only be generated at Computone.
-
-All Loadware begins with a header area which has a particular format. This
-includes a magic number which identifies the file as being (purportedly)
-loadware, CRC (for the loader), and version information.
-*/
-
-
-//-----------------------------------------------------------------------------
-// Format of loadware block
-//
-// This is defined as a union so we can pass a pointer to one of these items
-// and (if it is the first block) pick out the version information, etc.
-//
-// Otherwise, to deal with this as a simple character array
-//------------------------------------------------------------------------------
-
-#define LOADWARE_BLOCK_SIZE 512 // Number of bytes in each block of loadware
-
-typedef union _loadHdrStr
-{
- unsigned char c[LOADWARE_BLOCK_SIZE]; // Valid for every block
-
- struct // These fields are valid for only the first block of loadware.
- {
- unsigned char loadMagic; // Magic number: see below
- unsigned char loadBlocksMore; // How many more blocks?
- unsigned char loadCRC[2]; // Two CRC bytes: used by loader
- unsigned char loadVersion; // Version number
- unsigned char loadRevision; // Revision number
- unsigned char loadSubRevision; // Sub-revision number
- unsigned char loadSpares[9]; // Presently unused
- unsigned char loadDates[32]; // Null-terminated string which can give
- // date and time of compilation
- } e;
-} loadHdrStr, *loadHdrStrPtr;
-
-//------------------------------------
-// Defines for downloading code:
-//------------------------------------
-
-// The loadMagic field in the first block of the loadfile must be this, else the
-// file is not valid.
-//
-#define MAGIC_LOADFILE 0x3c
-
-// How do we know the load was successful? On completion of the load, the
-// bootstrap firmware returns a code to indicate whether it thought the download
-// was valid and intends to execute it. These are the only possible valid codes:
-//
-#define LOADWARE_OK 0xc3 // Download was ok
-#define LOADWARE_BAD 0x5a // Download was bad (CRC error)
-
-// Constants applicable to writing blocks of loadware:
-// The first block of loadware might take 600 mS to load, in extreme cases.
-// (Expandable board: worst case for sending startup messages to the LCD's).
-// The 600mS figure is not really a calculation, but a conservative
-// guess/guarantee. Usually this will be within 100 mS, like subsequent blocks.
-//
-#define MAX_DLOAD_START_TIME 1000 // 1000 mS
-#define MAX_DLOAD_READ_TIME 100 // 100 mS
-
-// Firmware should respond with status (see above) within this long of host
-// having sent the final block.
-//
-#define MAX_DLOAD_ACK_TIME 100 // 100 mS, again!
-
-//------------------------------------------------------
-// MAXIMUM NUMBER OF PORTS PER BOARD:
-// This is fixed for now (with the expandable), but may
-// be expanding according to even newer products.
-//------------------------------------------------------
-//
-#define ABS_MAX_BOXES 4 // Absolute most boxes per board
-#define ABS_BIGGEST_BOX 16 // Absolute the most ports per box
-#define ABS_MOST_PORTS (ABS_MAX_BOXES * ABS_BIGGEST_BOX)
-
-#define I2_OUTSW(port, addr, count) outsw((port), (addr), (((count)+1)/2))
-#define I2_OUTSB(port, addr, count) outsb((port), (addr), (((count)+1))&-2)
-#define I2_INSW(port, addr, count) insw((port), (addr), (((count)+1)/2))
-#define I2_INSB(port, addr, count) insb((port), (addr), (((count)+1))&-2)
-
-#endif // I2HW_H
-
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
deleted file mode 100644
index 0d10b89..0000000
--- a/drivers/char/ip2/i2lib.c
+++ /dev/null
@@ -1,2214 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: High-level interface code for the device driver. Uses the
-* Extremely Low Level Interface Support (i2ellis.c). Provides an
-* interface to the standard loadware, to support drivers or
-* application code. (This is included source code, not a separate
-* compilation module.)
-*
-*******************************************************************************/
-//------------------------------------------------------------------------------
-// Note on Strategy:
-// Once the board has been initialized, it will interrupt us when:
-// 1) It has something in the fifo for us to read (incoming data, flow control
-// packets, or whatever).
-// 2) It has stripped whatever we have sent last time in the FIFO (and
-// consequently is ready for more).
-//
-// Note also that the buffer sizes declared in i2lib.h are VERY SMALL. This
-// worsens performance considerably, but is done so that a great many channels
-// might use only a little memory.
-//------------------------------------------------------------------------------
-
-//------------------------------------------------------------------------------
-// Revision History:
-//
-// 0.00 - 4/16/91 --- First Draft
-// 0.01 - 4/29/91 --- 1st beta release
-// 0.02 - 6/14/91 --- Changes to allow small model compilation
-// 0.03 - 6/17/91 MAG Break reporting protected from interrupts routines with
-// in-line asm added for moving data to/from ring buffers,
-// replacing a variety of methods used previously.
-// 0.04 - 6/21/91 MAG Initial flow-control packets not queued until
-// i2_enable_interrupts time. Former versions would enqueue
-// them at i2_init_channel time, before we knew how many
-// channels were supposed to exist!
-// 0.05 - 10/12/91 MAG Major changes: works through the ellis.c routines now;
-// supports new 16-bit protocol and expandable boards.
-// - 10/24/91 MAG Most changes in place and stable.
-// 0.06 - 2/20/92 MAG Format of CMD_HOTACK corrected: the command takes no
-// argument.
-// 0.07 -- 3/11/92 MAG Support added to store special packet types at interrupt
-// level (mostly responses to specific commands.)
-// 0.08 -- 3/30/92 MAG Support added for STAT_MODEM packet
-// 0.09 -- 6/24/93 MAG i2Link... needed to update number of boards BEFORE
-// turning on the interrupt.
-// 0.10 -- 6/25/93 MAG To avoid gruesome death from a bad board, we sanity check
-// some incoming.
-//
-// 1.1 - 12/25/96 AKM Linux version.
-// - 10/09/98 DMC Revised Linux version.
-//------------------------------------------------------------------------------
-
-//************
-//* Includes *
-//************
-
-#include <linux/sched.h>
-#include "i2lib.h"
-
-
-//***********************
-//* Function Prototypes *
-//***********************
-static void i2QueueNeeds(i2eBordStrPtr, i2ChanStrPtr, int);
-static i2ChanStrPtr i2DeQueueNeeds(i2eBordStrPtr, int );
-static void i2StripFifo(i2eBordStrPtr);
-static void i2StuffFifoBypass(i2eBordStrPtr);
-static void i2StuffFifoFlow(i2eBordStrPtr);
-static void i2StuffFifoInline(i2eBordStrPtr);
-static int i2RetryFlushOutput(i2ChanStrPtr);
-
-// Not a documented part of the library routines (careful...) but the Diagnostic
-// i2diag.c finds them useful to help the throughput in certain limited
-// single-threaded operations.
-static void iiSendPendingMail(i2eBordStrPtr);
-static void serviceOutgoingFifo(i2eBordStrPtr);
-
-// Functions defined in ip2.c as part of interrupt handling
-static void do_input(struct work_struct *);
-static void do_status(struct work_struct *);
-
-//***************
-//* Debug Data *
-//***************
-#ifdef DEBUG_FIFO
-
-unsigned char DBGBuf[0x4000];
-unsigned short I = 0;
-
-static void
-WriteDBGBuf(char *s, unsigned char *src, unsigned short n )
-{
- char *p = src;
-
- // XXX: We need a spin lock here if we ever use this again
-
- while (*s) { // copy label
- DBGBuf[I] = *s++;
- I = I++ & 0x3fff;
- }
- while (n--) { // copy data
- DBGBuf[I] = *p++;
- I = I++ & 0x3fff;
- }
-}
-
-static void
-fatality(i2eBordStrPtr pB )
-{
- int i;
-
- for (i=0;i<sizeof(DBGBuf);i++) {
- if ((i%16) == 0)
- printk("\n%4x:",i);
- printk("%02x ",DBGBuf[i]);
- }
- printk("\n");
- for (i=0;i<sizeof(DBGBuf);i++) {
- if ((i%16) == 0)
- printk("\n%4x:",i);
- if (DBGBuf[i] >= ' ' && DBGBuf[i] <= '~') {
- printk(" %c ",DBGBuf[i]);
- } else {
- printk(" . ");
- }
- }
- printk("\n");
- printk("Last index %x\n",I);
-}
-#endif /* DEBUG_FIFO */
-
-//********
-//* Code *
-//********
-
-static inline int
-i2Validate ( i2ChanStrPtr pCh )
-{
- //ip2trace(pCh->port_index, ITRC_VERIFY,ITRC_ENTER,2,pCh->validity,
- // (CHANNEL_MAGIC | CHANNEL_SUPPORT));
- return ((pCh->validity & (CHANNEL_MAGIC_BITS | CHANNEL_SUPPORT))
- == (CHANNEL_MAGIC | CHANNEL_SUPPORT));
-}
-
-static void iiSendPendingMail_t(unsigned long data)
-{
- i2eBordStrPtr pB = (i2eBordStrPtr)data;
-
- iiSendPendingMail(pB);
-}
-
-//******************************************************************************
-// Function: iiSendPendingMail(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// If any outgoing mail bits are set and there is outgoing mailbox is empty,
-// send the mail and clear the bits.
-//******************************************************************************
-static void
-iiSendPendingMail(i2eBordStrPtr pB)
-{
- if (pB->i2eOutMailWaiting && (!pB->i2eWaitingForEmptyFifo) )
- {
- if (iiTrySendMail(pB, pB->i2eOutMailWaiting))
- {
- /* If we were already waiting for fifo to empty,
- * or just sent MB_OUT_STUFFED, then we are
- * still waiting for it to empty, until we should
- * receive an MB_IN_STRIPPED from the board.
- */
- pB->i2eWaitingForEmptyFifo |=
- (pB->i2eOutMailWaiting & MB_OUT_STUFFED);
- pB->i2eOutMailWaiting = 0;
- pB->SendPendingRetry = 0;
- } else {
-/* The only time we hit this area is when "iiTrySendMail" has
- failed. That only occurs when the outbound mailbox is
- still busy with the last message. We take a short breather
- to let the board catch up with itself and then try again.
- 16 Retries is the limit - then we got a borked board.
- /\/\|=mhw=|\/\/ */
-
- if( ++pB->SendPendingRetry < 16 ) {
- setup_timer(&pB->SendPendingTimer,
- iiSendPendingMail_t, (unsigned long)pB);
- mod_timer(&pB->SendPendingTimer, jiffies + 1);
- } else {
- printk( KERN_ERR "IP2: iiSendPendingMail unable to queue outbound mail\n" );
- }
- }
- }
-}
-
-//******************************************************************************
-// Function: i2InitChannels(pB, nChannels, pCh)
-// Parameters: Pointer to Ellis Board structure
-// Number of channels to initialize
-// Pointer to first element in an array of channel structures
-// Returns: Success or failure
-//
-// Description:
-//
-// This function patches pointers, back-pointers, and initializes all the
-// elements in the channel structure array.
-//
-// This should be run after the board structure is initialized, through having
-// loaded the standard loadware (otherwise it complains).
-//
-// In any case, it must be done before any serious work begins initializing the
-// irq's or sending commands...
-//
-//******************************************************************************
-static int
-i2InitChannels ( i2eBordStrPtr pB, int nChannels, i2ChanStrPtr pCh)
-{
- int index, stuffIndex;
- i2ChanStrPtr *ppCh;
-
- if (pB->i2eValid != I2E_MAGIC) {
- I2_COMPLETE(pB, I2EE_BADMAGIC);
- }
- if (pB->i2eState != II_STATE_STDLOADED) {
- I2_COMPLETE(pB, I2EE_BADSTATE);
- }
-
- rwlock_init(&pB->read_fifo_spinlock);
- rwlock_init(&pB->write_fifo_spinlock);
- rwlock_init(&pB->Dbuf_spinlock);
- rwlock_init(&pB->Bbuf_spinlock);
- rwlock_init(&pB->Fbuf_spinlock);
-
- // NO LOCK needed yet - this is init
-
- pB->i2eChannelPtr = pCh;
- pB->i2eChannelCnt = nChannels;
-
- pB->i2Fbuf_strip = pB->i2Fbuf_stuff = 0;
- pB->i2Dbuf_strip = pB->i2Dbuf_stuff = 0;
- pB->i2Bbuf_strip = pB->i2Bbuf_stuff = 0;
-
- pB->SendPendingRetry = 0;
-
- memset ( pCh, 0, sizeof (i2ChanStr) * nChannels );
-
- for (index = stuffIndex = 0, ppCh = (i2ChanStrPtr *)(pB->i2Fbuf);
- nChannels && index < ABS_MOST_PORTS;
- index++)
- {
- if ( !(pB->i2eChannelMap[index >> 4] & (1 << (index & 0xf)) ) ) {
- continue;
- }
- rwlock_init(&pCh->Ibuf_spinlock);
- rwlock_init(&pCh->Obuf_spinlock);
- rwlock_init(&pCh->Cbuf_spinlock);
- rwlock_init(&pCh->Pbuf_spinlock);
- // NO LOCK needed yet - this is init
- // Set up validity flag according to support level
- if (pB->i2eGoodMap[index >> 4] & (1 << (index & 0xf)) ) {
- pCh->validity = CHANNEL_MAGIC | CHANNEL_SUPPORT;
- } else {
- pCh->validity = CHANNEL_MAGIC;
- }
- pCh->pMyBord = pB; /* Back-pointer */
-
- // Prepare an outgoing flow-control packet to send as soon as the chance
- // occurs.
- if ( pCh->validity & CHANNEL_SUPPORT ) {
- pCh->infl.hd.i2sChannel = index;
- pCh->infl.hd.i2sCount = 5;
- pCh->infl.hd.i2sType = PTYPE_BYPASS;
- pCh->infl.fcmd = 37;
- pCh->infl.asof = 0;
- pCh->infl.room = IBUF_SIZE - 1;
-
- pCh->whenSendFlow = (IBUF_SIZE/5)*4; // when 80% full
-
- // The following is similar to calling i2QueueNeeds, except that this
- // is done in longhand, since we are setting up initial conditions on
- // many channels at once.
- pCh->channelNeeds = NEED_FLOW; // Since starting from scratch
- pCh->sinceLastFlow = 0; // No bytes received since last flow
- // control packet was queued
- stuffIndex++;
- *ppCh++ = pCh; // List this channel as needing
- // initial flow control packet sent
- }
-
- // Don't allow anything to be sent until the status packets come in from
- // the board.
-
- pCh->outfl.asof = 0;
- pCh->outfl.room = 0;
-
- // Initialize all the ring buffers
-
- pCh->Ibuf_stuff = pCh->Ibuf_strip = 0;
- pCh->Obuf_stuff = pCh->Obuf_strip = 0;
- pCh->Cbuf_stuff = pCh->Cbuf_strip = 0;
-
- memset( &pCh->icount, 0, sizeof (struct async_icount) );
- pCh->hotKeyIn = HOT_CLEAR;
- pCh->channelOptions = 0;
- pCh->bookMarks = 0;
- init_waitqueue_head(&pCh->pBookmarkWait);
-
- init_waitqueue_head(&pCh->open_wait);
- init_waitqueue_head(&pCh->close_wait);
- init_waitqueue_head(&pCh->delta_msr_wait);
-
- // Set base and divisor so default custom rate is 9600
- pCh->BaudBase = 921600; // MAX for ST654, changed after we get
- pCh->BaudDivisor = 96; // the boxids (UART types) later
-
- pCh->dataSetIn = 0;
- pCh->dataSetOut = 0;
-
- pCh->wopen = 0;
- pCh->throttled = 0;
-
- pCh->speed = CBR_9600;
-
- pCh->flags = 0;
-
- pCh->ClosingDelay = 5*HZ/10;
- pCh->ClosingWaitTime = 30*HZ;
-
- // Initialize task queue objects
- INIT_WORK(&pCh->tqueue_input, do_input);
- INIT_WORK(&pCh->tqueue_status, do_status);
-
-#ifdef IP2DEBUG_TRACE
- pCh->trace = ip2trace;
-#endif
-
- ++pCh;
- --nChannels;
- }
- // No need to check for wrap here; this is initialization.
- pB->i2Fbuf_stuff = stuffIndex;
- I2_COMPLETE(pB, I2EE_GOOD);
-
-}
-
-//******************************************************************************
-// Function: i2DeQueueNeeds(pB, type)
-// Parameters: Pointer to a board structure
-// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
-// Returns:
-// Pointer to a channel structure
-//
-// Description: Returns pointer struct of next channel that needs service of
-// the type specified. Otherwise returns a NULL reference.
-//
-//******************************************************************************
-static i2ChanStrPtr
-i2DeQueueNeeds(i2eBordStrPtr pB, int type)
-{
- unsigned short queueIndex;
- unsigned long flags;
-
- i2ChanStrPtr pCh = NULL;
-
- switch(type) {
-
- case NEED_INLINE:
-
- write_lock_irqsave(&pB->Dbuf_spinlock, flags);
- if ( pB->i2Dbuf_stuff != pB->i2Dbuf_strip)
- {
- queueIndex = pB->i2Dbuf_strip;
- pCh = pB->i2Dbuf[queueIndex];
- queueIndex++;
- if (queueIndex >= CH_QUEUE_SIZE) {
- queueIndex = 0;
- }
- pB->i2Dbuf_strip = queueIndex;
- pCh->channelNeeds &= ~NEED_INLINE;
- }
- write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
- break;
-
- case NEED_BYPASS:
-
- write_lock_irqsave(&pB->Bbuf_spinlock, flags);
- if (pB->i2Bbuf_stuff != pB->i2Bbuf_strip)
- {
- queueIndex = pB->i2Bbuf_strip;
- pCh = pB->i2Bbuf[queueIndex];
- queueIndex++;
- if (queueIndex >= CH_QUEUE_SIZE) {
- queueIndex = 0;
- }
- pB->i2Bbuf_strip = queueIndex;
- pCh->channelNeeds &= ~NEED_BYPASS;
- }
- write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
- break;
-
- case NEED_FLOW:
-
- write_lock_irqsave(&pB->Fbuf_spinlock, flags);
- if (pB->i2Fbuf_stuff != pB->i2Fbuf_strip)
- {
- queueIndex = pB->i2Fbuf_strip;
- pCh = pB->i2Fbuf[queueIndex];
- queueIndex++;
- if (queueIndex >= CH_QUEUE_SIZE) {
- queueIndex = 0;
- }
- pB->i2Fbuf_strip = queueIndex;
- pCh->channelNeeds &= ~NEED_FLOW;
- }
- write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
- break;
- default:
- printk(KERN_ERR "i2DeQueueNeeds called with bad type:%x\n",type);
- break;
- }
- return pCh;
-}
-
-//******************************************************************************
-// Function: i2QueueNeeds(pB, pCh, type)
-// Parameters: Pointer to a board structure
-// Pointer to a channel structure
-// type bit map: may include NEED_INLINE, NEED_BYPASS, or NEED_FLOW
-// Returns: Nothing
-//
-// Description:
-// For each type of need selected, if the given channel is not already in the
-// queue, adds it, and sets the flag indicating it is in the queue.
-//******************************************************************************
-static void
-i2QueueNeeds(i2eBordStrPtr pB, i2ChanStrPtr pCh, int type)
-{
- unsigned short queueIndex;
- unsigned long flags;
-
- // We turn off all the interrupts during this brief process, since the
- // interrupt-level code might want to put things on the queue as well.
-
- switch (type) {
-
- case NEED_INLINE:
-
- write_lock_irqsave(&pB->Dbuf_spinlock, flags);
- if ( !(pCh->channelNeeds & NEED_INLINE) )
- {
- pCh->channelNeeds |= NEED_INLINE;
- queueIndex = pB->i2Dbuf_stuff;
- pB->i2Dbuf[queueIndex++] = pCh;
- if (queueIndex >= CH_QUEUE_SIZE)
- queueIndex = 0;
- pB->i2Dbuf_stuff = queueIndex;
- }
- write_unlock_irqrestore(&pB->Dbuf_spinlock, flags);
- break;
-
- case NEED_BYPASS:
-
- write_lock_irqsave(&pB->Bbuf_spinlock, flags);
- if ((type & NEED_BYPASS) && !(pCh->channelNeeds & NEED_BYPASS))
- {
- pCh->channelNeeds |= NEED_BYPASS;
- queueIndex = pB->i2Bbuf_stuff;
- pB->i2Bbuf[queueIndex++] = pCh;
- if (queueIndex >= CH_QUEUE_SIZE)
- queueIndex = 0;
- pB->i2Bbuf_stuff = queueIndex;
- }
- write_unlock_irqrestore(&pB->Bbuf_spinlock, flags);
- break;
-
- case NEED_FLOW:
-
- write_lock_irqsave(&pB->Fbuf_spinlock, flags);
- if ((type & NEED_FLOW) && !(pCh->channelNeeds & NEED_FLOW))
- {
- pCh->channelNeeds |= NEED_FLOW;
- queueIndex = pB->i2Fbuf_stuff;
- pB->i2Fbuf[queueIndex++] = pCh;
- if (queueIndex >= CH_QUEUE_SIZE)
- queueIndex = 0;
- pB->i2Fbuf_stuff = queueIndex;
- }
- write_unlock_irqrestore(&pB->Fbuf_spinlock, flags);
- break;
-
- case NEED_CREDIT:
- pCh->channelNeeds |= NEED_CREDIT;
- break;
- default:
- printk(KERN_ERR "i2QueueNeeds called with bad type:%x\n",type);
- break;
- }
- return;
-}
-
-//******************************************************************************
-// Function: i2QueueCommands(type, pCh, timeout, nCommands, pCs,...)
-// Parameters: type - PTYPE_BYPASS or PTYPE_INLINE
-// pointer to the channel structure
-// maximum period to wait
-// number of commands (n)
-// n commands
-// Returns: Number of commands sent, or -1 for error
-//
-// get board lock before calling
-//
-// Description:
-// Queues up some commands to be sent to a channel. To send possibly several
-// bypass or inline commands to the given channel. The timeout parameter
-// indicates how many HUNDREDTHS OF SECONDS to wait until there is room:
-// 0 = return immediately if no room, -ive = wait forever, +ive = number of
-// 1/100 seconds to wait. Return values:
-// -1 Some kind of nasty error: bad channel structure or invalid arguments.
-// 0 No room to send all the commands
-// (+) Number of commands sent
-//******************************************************************************
-static int
-i2QueueCommands(int type, i2ChanStrPtr pCh, int timeout, int nCommands,
- cmdSyntaxPtr pCs0,...)
-{
- int totalsize = 0;
- int blocksize;
- int lastended;
- cmdSyntaxPtr *ppCs;
- cmdSyntaxPtr pCs;
- int count;
- int flag;
- i2eBordStrPtr pB;
-
- unsigned short maxBlock;
- unsigned short maxBuff;
- short bufroom;
- unsigned short stuffIndex;
- unsigned char *pBuf;
- unsigned char *pInsert;
- unsigned char *pDest, *pSource;
- unsigned short channel;
- int cnt;
- unsigned long flags = 0;
- rwlock_t *lock_var_p = NULL;
-
- // Make sure the channel exists, otherwise do nothing
- if ( !i2Validate ( pCh ) ) {
- return -1;
- }
-
- ip2trace (CHANN, ITRC_QUEUE, ITRC_ENTER, 0 );
-
- pB = pCh->pMyBord;
-
- // Board must also exist, and THE INTERRUPT COMMAND ALREADY SENT
- if (pB->i2eValid != I2E_MAGIC || pB->i2eUsingIrq == I2_IRQ_UNDEFINED)
- return -2;
- // If the board has gone fatal, return bad, and also hit the trap routine if
- // it exists.
- if (pB->i2eFatal) {
- if ( pB->i2eFatalTrap ) {
- (*(pB)->i2eFatalTrap)(pB);
- }
- return -3;
- }
- // Set up some variables, Which buffers are we using? How big are they?
- switch(type)
- {
- case PTYPE_INLINE:
- flag = INL;
- maxBlock = MAX_OBUF_BLOCK;
- maxBuff = OBUF_SIZE;
- pBuf = pCh->Obuf;
- break;
- case PTYPE_BYPASS:
- flag = BYP;
- maxBlock = MAX_CBUF_BLOCK;
- maxBuff = CBUF_SIZE;
- pBuf = pCh->Cbuf;
- break;
- default:
- return -4;
- }
- // Determine the total size required for all the commands
- totalsize = blocksize = sizeof(i2CmdHeader);
- lastended = 0;
- ppCs = &pCs0;
- for ( count = nCommands; count; count--, ppCs++)
- {
- pCs = *ppCs;
- cnt = pCs->length;
- // Will a new block be needed for this one?
- // Two possible reasons: too
- // big or previous command has to be at the end of a packet.
- if ((blocksize + cnt > maxBlock) || lastended) {
- blocksize = sizeof(i2CmdHeader);
- totalsize += sizeof(i2CmdHeader);
- }
- totalsize += cnt;
- blocksize += cnt;
-
- // If this command had to end a block, then we will make sure to
- // account for it should there be any more blocks.
- lastended = pCs->flags & END;
- }
- for (;;) {
- // Make sure any pending flush commands go out before we add more data.
- if ( !( pCh->flush_flags && i2RetryFlushOutput( pCh ) ) ) {
- // How much room (this time through) ?
- switch(type) {
- case PTYPE_INLINE:
- lock_var_p = &pCh->Obuf_spinlock;
- write_lock_irqsave(lock_var_p, flags);
- stuffIndex = pCh->Obuf_stuff;
- bufroom = pCh->Obuf_strip - stuffIndex;
- break;
- case PTYPE_BYPASS:
- lock_var_p = &pCh->Cbuf_spinlock;
- write_lock_irqsave(lock_var_p, flags);
- stuffIndex = pCh->Cbuf_stuff;
- bufroom = pCh->Cbuf_strip - stuffIndex;
- break;
- default:
- return -5;
- }
- if (--bufroom < 0) {
- bufroom += maxBuff;
- }
-
- ip2trace (CHANN, ITRC_QUEUE, 2, 1, bufroom );
-
- // Check for overflow
- if (totalsize <= bufroom) {
- // Normal Expected path - We still hold LOCK
- break; /* from for()- Enough room: goto proceed */
- }
- ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- write_unlock_irqrestore(lock_var_p, flags);
- } else
- ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
-
- /* Prepare to wait for buffers to empty */
- serviceOutgoingFifo(pB); // Dump what we got
-
- if (timeout == 0) {
- return 0; // Tired of waiting
- }
- if (timeout > 0)
- timeout--; // So negative values == forever
-
- if (!in_interrupt()) {
- schedule_timeout_interruptible(1); // short nap
- } else {
- // we cannot sched/sleep in interrupt silly
- return 0;
- }
- if (signal_pending(current)) {
- return 0; // Wake up! Time to die!!!
- }
-
- ip2trace (CHANN, ITRC_QUEUE, 4, 0 );
-
- } // end of for(;;)
-
- // At this point we have room and the lock - stick them in.
- channel = pCh->infl.hd.i2sChannel;
- pInsert = &pBuf[stuffIndex]; // Pointer to start of packet
- pDest = CMD_OF(pInsert); // Pointer to start of command
-
- // When we start counting, the block is the size of the header
- for (blocksize = sizeof(i2CmdHeader), count = nCommands,
- lastended = 0, ppCs = &pCs0;
- count;
- count--, ppCs++)
- {
- pCs = *ppCs; // Points to command protocol structure
-
- // If this is a bookmark request command, post the fact that a bookmark
- // request is pending. NOTE THIS TRICK ONLY WORKS BECAUSE CMD_BMARK_REQ
- // has no parameters! The more general solution would be to reference
- // pCs->cmd[0].
- if (pCs == CMD_BMARK_REQ) {
- pCh->bookMarks++;
-
- ip2trace (CHANN, ITRC_DRAIN, 30, 1, pCh->bookMarks );
-
- }
- cnt = pCs->length;
-
- // If this command would put us over the maximum block size or
- // if the last command had to be at the end of a block, we end
- // the existing block here and start a new one.
- if ((blocksize + cnt > maxBlock) || lastended) {
-
- ip2trace (CHANN, ITRC_QUEUE, 5, 0 );
-
- PTYPE_OF(pInsert) = type;
- CHANNEL_OF(pInsert) = channel;
- // count here does not include the header
- CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
- stuffIndex += blocksize;
- if(stuffIndex >= maxBuff) {
- stuffIndex = 0;
- pInsert = pBuf;
- }
- pInsert = &pBuf[stuffIndex]; // Pointer to start of next pkt
- pDest = CMD_OF(pInsert);
- blocksize = sizeof(i2CmdHeader);
- }
- // Now we know there is room for this one in the current block
-
- blocksize += cnt; // Total bytes in this command
- pSource = pCs->cmd; // Copy the command into the buffer
- while (cnt--) {
- *pDest++ = *pSource++;
- }
- // If this command had to end a block, then we will make sure to account
- // for it should there be any more blocks.
- lastended = pCs->flags & END;
- } // end for
- // Clean up the final block by writing header, etc
-
- PTYPE_OF(pInsert) = type;
- CHANNEL_OF(pInsert) = channel;
- // count here does not include the header
- CMD_COUNT_OF(pInsert) = blocksize - sizeof(i2CmdHeader);
- stuffIndex += blocksize;
- if(stuffIndex >= maxBuff) {
- stuffIndex = 0;
- pInsert = pBuf;
- }
- // Updates the index, and post the need for service. When adding these to
- // the queue of channels, we turn off the interrupt while doing so,
- // because at interrupt level we might want to push a channel back to the
- // end of the queue.
- switch(type)
- {
- case PTYPE_INLINE:
- pCh->Obuf_stuff = stuffIndex; // Store buffer pointer
- write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
- pB->debugInlineQueued++;
- // Add the channel pointer to list of channels needing service (first
- // come...), if it's not already there.
- i2QueueNeeds(pB, pCh, NEED_INLINE);
- break;
-
- case PTYPE_BYPASS:
- pCh->Cbuf_stuff = stuffIndex; // Store buffer pointer
- write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
-
- pB->debugBypassQueued++;
- // Add the channel pointer to list of channels needing service (first
- // come...), if it's not already there.
- i2QueueNeeds(pB, pCh, NEED_BYPASS);
- break;
- }
-
- ip2trace (CHANN, ITRC_QUEUE, ITRC_RETURN, 1, nCommands );
-
- return nCommands; // Good status: number of commands sent
-}
-
-//******************************************************************************
-// Function: i2GetStatus(pCh,resetBits)
-// Parameters: Pointer to a channel structure
-// Bit map of status bits to clear
-// Returns: Bit map of current status bits
-//
-// Description:
-// Returns the state of data set signals, and whether a break has been received,
-// (see i2lib.h for bit-mapped result). resetBits is a bit-map of any status
-// bits to be cleared: I2_BRK, I2_PAR, I2_FRA, I2_OVR,... These are cleared
-// AFTER the condition is passed. If pCh does not point to a valid channel,
-// returns -1 (which would be impossible otherwise.
-//******************************************************************************
-static int
-i2GetStatus(i2ChanStrPtr pCh, int resetBits)
-{
- unsigned short status;
- i2eBordStrPtr pB;
-
- ip2trace (CHANN, ITRC_STATUS, ITRC_ENTER, 2, pCh->dataSetIn, resetBits );
-
- // Make sure the channel exists, otherwise do nothing */
- if ( !i2Validate ( pCh ) )
- return -1;
-
- pB = pCh->pMyBord;
-
- status = pCh->dataSetIn;
-
- // Clear any specified error bits: but note that only actual error bits can
- // be cleared, regardless of the value passed.
- if (resetBits)
- {
- pCh->dataSetIn &= ~(resetBits & (I2_BRK | I2_PAR | I2_FRA | I2_OVR));
- pCh->dataSetIn &= ~(I2_DDCD | I2_DCTS | I2_DDSR | I2_DRI);
- }
-
- ip2trace (CHANN, ITRC_STATUS, ITRC_RETURN, 1, pCh->dataSetIn );
-
- return status;
-}
-
-//******************************************************************************
-// Function: i2Input(pChpDest,count)
-// Parameters: Pointer to a channel structure
-// Pointer to data buffer
-// Number of bytes to read
-// Returns: Number of bytes read, or -1 for error
-//
-// Description:
-// Strips data from the input buffer and writes it to pDest. If there is a
-// collosal blunder, (invalid structure pointers or the like), returns -1.
-// Otherwise, returns the number of bytes read.
-//******************************************************************************
-static int
-i2Input(i2ChanStrPtr pCh)
-{
- int amountToMove;
- unsigned short stripIndex;
- int count;
- unsigned long flags = 0;
-
- ip2trace (CHANN, ITRC_INPUT, ITRC_ENTER, 0);
-
- // Ensure channel structure seems real
- if ( !i2Validate( pCh ) ) {
- count = -1;
- goto i2Input_exit;
- }
- write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
-
- // initialize some accelerators and private copies
- stripIndex = pCh->Ibuf_strip;
-
- count = pCh->Ibuf_stuff - stripIndex;
-
- // If buffer is empty or requested data count was 0, (trivial case) return
- // without any further thought.
- if ( count == 0 ) {
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- goto i2Input_exit;
- }
- // Adjust for buffer wrap
- if ( count < 0 ) {
- count += IBUF_SIZE;
- }
- // Don't give more than can be taken by the line discipline
- amountToMove = pCh->pTTY->receive_room;
- if (count > amountToMove) {
- count = amountToMove;
- }
- // How much could we copy without a wrap?
- amountToMove = IBUF_SIZE - stripIndex;
-
- if (amountToMove > count) {
- amountToMove = count;
- }
- // Move the first block
- pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
- &(pCh->Ibuf[stripIndex]), NULL, amountToMove );
- // If we needed to wrap, do the second data move
- if (count > amountToMove) {
- pCh->pTTY->ldisc->ops->receive_buf( pCh->pTTY,
- pCh->Ibuf, NULL, count - amountToMove );
- }
- // Bump and wrap the stripIndex all at once by the amount of data read. This
- // method is good regardless of whether the data was in one or two pieces.
- stripIndex += count;
- if (stripIndex >= IBUF_SIZE) {
- stripIndex -= IBUF_SIZE;
- }
- pCh->Ibuf_strip = stripIndex;
-
- // Update our flow control information and possibly queue ourselves to send
- // it, depending on how much data has been stripped since the last time a
- // packet was sent.
- pCh->infl.asof += count;
-
- if ((pCh->sinceLastFlow += count) >= pCh->whenSendFlow) {
- pCh->sinceLastFlow -= pCh->whenSendFlow;
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
- } else {
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- }
-
-i2Input_exit:
-
- ip2trace (CHANN, ITRC_INPUT, ITRC_RETURN, 1, count);
-
- return count;
-}
-
-//******************************************************************************
-// Function: i2InputFlush(pCh)
-// Parameters: Pointer to a channel structure
-// Returns: Number of bytes stripped, or -1 for error
-//
-// Description:
-// Strips any data from the input buffer. If there is a collosal blunder,
-// (invalid structure pointers or the like), returns -1. Otherwise, returns the
-// number of bytes stripped.
-//******************************************************************************
-static int
-i2InputFlush(i2ChanStrPtr pCh)
-{
- int count;
- unsigned long flags;
-
- // Ensure channel structure seems real
- if ( !i2Validate ( pCh ) )
- return -1;
-
- ip2trace (CHANN, ITRC_INPUT, 10, 0);
-
- write_lock_irqsave(&pCh->Ibuf_spinlock, flags);
- count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
-
- // Adjust for buffer wrap
- if (count < 0) {
- count += IBUF_SIZE;
- }
-
- // Expedient way to zero out the buffer
- pCh->Ibuf_strip = pCh->Ibuf_stuff;
-
-
- // Update our flow control information and possibly queue ourselves to send
- // it, depending on how much data has been stripped since the last time a
- // packet was sent.
-
- pCh->infl.asof += count;
-
- if ( (pCh->sinceLastFlow += count) >= pCh->whenSendFlow )
- {
- pCh->sinceLastFlow -= pCh->whenSendFlow;
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- i2QueueNeeds(pCh->pMyBord, pCh, NEED_FLOW);
- } else {
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- }
-
- ip2trace (CHANN, ITRC_INPUT, 19, 1, count);
-
- return count;
-}
-
-//******************************************************************************
-// Function: i2InputAvailable(pCh)
-// Parameters: Pointer to a channel structure
-// Returns: Number of bytes available, or -1 for error
-//
-// Description:
-// If there is a collosal blunder, (invalid structure pointers or the like),
-// returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
-// returns the number of bytes available in the buffer.
-//******************************************************************************
-#if 0
-static int
-i2InputAvailable(i2ChanStrPtr pCh)
-{
- int count;
-
- // Ensure channel structure seems real
- if ( !i2Validate ( pCh ) ) return -1;
-
-
- // initialize some accelerators and private copies
- read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
- count = pCh->Ibuf_stuff - pCh->Ibuf_strip;
- read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-
- // Adjust for buffer wrap
- if (count < 0)
- {
- count += IBUF_SIZE;
- }
-
- return count;
-}
-#endif
-
-//******************************************************************************
-// Function: i2Output(pCh, pSource, count)
-// Parameters: Pointer to channel structure
-// Pointer to source data
-// Number of bytes to send
-// Returns: Number of bytes sent, or -1 for error
-//
-// Description:
-// Queues the data at pSource to be sent as data packets to the board. If there
-// is a collosal blunder, (invalid structure pointers or the like), returns -1.
-// Otherwise, returns the number of bytes written. What if there is not enough
-// room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
-// we transfer as many characters as we can now, then return. If this bit is
-// clear (default), routine will spin along until all the data is buffered.
-// Should this occur, the 1-ms delay routine is called while waiting to avoid
-// applications that one cannot break out of.
-//******************************************************************************
-static int
-i2Output(i2ChanStrPtr pCh, const char *pSource, int count)
-{
- i2eBordStrPtr pB;
- unsigned char *pInsert;
- int amountToMove;
- int countOriginal = count;
- unsigned short channel;
- unsigned short stuffIndex;
- unsigned long flags;
-
- int bailout = 10;
-
- ip2trace (CHANN, ITRC_OUTPUT, ITRC_ENTER, 2, count, 0 );
-
- // Ensure channel structure seems real
- if ( !i2Validate ( pCh ) )
- return -1;
-
- // initialize some accelerators and private copies
- pB = pCh->pMyBord;
- channel = pCh->infl.hd.i2sChannel;
-
- // If the board has gone fatal, return bad, and also hit the trap routine if
- // it exists.
- if (pB->i2eFatal) {
- if (pB->i2eFatalTrap) {
- (*(pB)->i2eFatalTrap)(pB);
- }
- return -1;
- }
- // Proceed as though we would do everything
- while ( count > 0 ) {
-
- // How much room in output buffer is there?
- read_lock_irqsave(&pCh->Obuf_spinlock, flags);
- amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
- if (amountToMove < 0) {
- amountToMove += OBUF_SIZE;
- }
- // Subtract off the headers size and see how much room there is for real
- // data. If this is negative, we will discover later.
- amountToMove -= sizeof (i2DataHeader);
-
- // Don't move more (now) than can go in a single packet
- if ( amountToMove > (int)(MAX_OBUF_BLOCK - sizeof(i2DataHeader)) ) {
- amountToMove = MAX_OBUF_BLOCK - sizeof(i2DataHeader);
- }
- // Don't move more than the count we were given
- if (amountToMove > count) {
- amountToMove = count;
- }
- // Now we know how much we must move: NB because the ring buffers have
- // an overflow area at the end, we needn't worry about wrapping in the
- // middle of a packet.
-
-// Small WINDOW here with no LOCK but I can't call Flush with LOCK
-// We would be flushing (or ending flush) anyway
-
- ip2trace (CHANN, ITRC_OUTPUT, 10, 1, amountToMove );
-
- if ( !(pCh->flush_flags && i2RetryFlushOutput(pCh) )
- && amountToMove > 0 )
- {
- write_lock_irqsave(&pCh->Obuf_spinlock, flags);
- stuffIndex = pCh->Obuf_stuff;
-
- // Had room to move some data: don't know whether the block size,
- // buffer space, or what was the limiting factor...
- pInsert = &(pCh->Obuf[stuffIndex]);
-
- // Set up the header
- CHANNEL_OF(pInsert) = channel;
- PTYPE_OF(pInsert) = PTYPE_DATA;
- TAG_OF(pInsert) = 0;
- ID_OF(pInsert) = ID_ORDINARY_DATA;
- DATA_COUNT_OF(pInsert) = amountToMove;
-
- // Move the data
- memcpy( (char*)(DATA_OF(pInsert)), pSource, amountToMove );
- // Adjust pointers and indices
- pSource += amountToMove;
- pCh->Obuf_char_count += amountToMove;
- stuffIndex += amountToMove + sizeof(i2DataHeader);
- count -= amountToMove;
-
- if (stuffIndex >= OBUF_SIZE) {
- stuffIndex = 0;
- }
- pCh->Obuf_stuff = stuffIndex;
-
- write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
- ip2trace (CHANN, ITRC_OUTPUT, 13, 1, stuffIndex );
-
- } else {
-
- // Cannot move data
- // becuz we need to stuff a flush
- // or amount to move is <= 0
-
- ip2trace(CHANN, ITRC_OUTPUT, 14, 3,
- amountToMove, pB->i2eFifoRemains,
- pB->i2eWaitingForEmptyFifo );
-
- // Put this channel back on queue
- // this ultimatly gets more data or wakes write output
- i2QueueNeeds(pB, pCh, NEED_INLINE);
-
- if ( pB->i2eWaitingForEmptyFifo ) {
-
- ip2trace (CHANN, ITRC_OUTPUT, 16, 0 );
-
- // or schedule
- if (!in_interrupt()) {
-
- ip2trace (CHANN, ITRC_OUTPUT, 61, 0 );
-
- schedule_timeout_interruptible(2);
- if (signal_pending(current)) {
- break;
- }
- continue;
- } else {
-
- ip2trace (CHANN, ITRC_OUTPUT, 62, 0 );
-
- // let interrupt in = WAS restore_flags()
- // We hold no lock nor is irq off anymore???
-
- break;
- }
- break; // from while(count)
- }
- else if ( pB->i2eFifoRemains < 32 && !pB->i2eTxMailEmpty ( pB ) )
- {
- ip2trace (CHANN, ITRC_OUTPUT, 19, 2,
- pB->i2eFifoRemains,
- pB->i2eTxMailEmpty );
-
- break; // from while(count)
- } else if ( pCh->channelNeeds & NEED_CREDIT ) {
-
- ip2trace (CHANN, ITRC_OUTPUT, 22, 0 );
-
- break; // from while(count)
- } else if ( --bailout) {
-
- // Try to throw more things (maybe not us) in the fifo if we're
- // not already waiting for it.
-
- ip2trace (CHANN, ITRC_OUTPUT, 20, 0 );
-
- serviceOutgoingFifo(pB);
- //break; CONTINUE;
- } else {
- ip2trace (CHANN, ITRC_OUTPUT, 21, 3,
- pB->i2eFifoRemains,
- pB->i2eOutMailWaiting,
- pB->i2eWaitingForEmptyFifo );
-
- break; // from while(count)
- }
- }
- } // End of while(count)
-
- i2QueueNeeds(pB, pCh, NEED_INLINE);
-
- // We drop through either when the count expires, or when there is some
- // count left, but there was a non-blocking write.
- if (countOriginal > count) {
-
- ip2trace (CHANN, ITRC_OUTPUT, 17, 2, countOriginal, count );
-
- serviceOutgoingFifo( pB );
- }
-
- ip2trace (CHANN, ITRC_OUTPUT, ITRC_RETURN, 2, countOriginal, count );
-
- return countOriginal - count;
-}
-
-//******************************************************************************
-// Function: i2FlushOutput(pCh)
-// Parameters: Pointer to a channel structure
-// Returns: Nothing
-//
-// Description:
-// Sends bypass command to start flushing (waiting possibly forever until there
-// is room), then sends inline command to stop flushing output, (again waiting
-// possibly forever).
-//******************************************************************************
-static inline void
-i2FlushOutput(i2ChanStrPtr pCh)
-{
-
- ip2trace (CHANN, ITRC_FLUSH, 1, 1, pCh->flush_flags );
-
- if (pCh->flush_flags)
- return;
-
- if ( 1 != i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
- pCh->flush_flags = STARTFL_FLAG; // Failed - flag for later
-
- ip2trace (CHANN, ITRC_FLUSH, 2, 0 );
-
- } else if ( 1 != i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL) ) {
- pCh->flush_flags = STOPFL_FLAG; // Failed - flag for later
-
- ip2trace (CHANN, ITRC_FLUSH, 3, 0 );
- }
-}
-
-static int
-i2RetryFlushOutput(i2ChanStrPtr pCh)
-{
- int old_flags = pCh->flush_flags;
-
- ip2trace (CHANN, ITRC_FLUSH, 14, 1, old_flags );
-
- pCh->flush_flags = 0; // Clear flag so we can avoid recursion
- // and queue the commands
-
- if ( old_flags & STARTFL_FLAG ) {
- if ( 1 == i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_STARTFL) ) {
- old_flags = STOPFL_FLAG; //Success - send stop flush
- } else {
- old_flags = STARTFL_FLAG; //Failure - Flag for retry later
- }
-
- ip2trace (CHANN, ITRC_FLUSH, 15, 1, old_flags );
-
- }
- if ( old_flags & STOPFL_FLAG ) {
- if (1 == i2QueueCommands(PTYPE_INLINE, pCh, 0, 1, CMD_STOPFL)) {
- old_flags = 0; // Success - clear flags
- }
-
- ip2trace (CHANN, ITRC_FLUSH, 16, 1, old_flags );
- }
- pCh->flush_flags = old_flags;
-
- ip2trace (CHANN, ITRC_FLUSH, 17, 1, old_flags );
-
- return old_flags;
-}
-
-//******************************************************************************
-// Function: i2DrainOutput(pCh,timeout)
-// Parameters: Pointer to a channel structure
-// Maximum period to wait
-// Returns: ?
-//
-// Description:
-// Uses the bookmark request command to ask the board to send a bookmark back as
-// soon as all the data is completely sent.
-//******************************************************************************
-static void
-i2DrainWakeup(unsigned long d)
-{
- i2ChanStrPtr pCh = (i2ChanStrPtr)d;
-
- ip2trace (CHANN, ITRC_DRAIN, 10, 1, pCh->BookmarkTimer.expires );
-
- pCh->BookmarkTimer.expires = 0;
- wake_up_interruptible( &pCh->pBookmarkWait );
-}
-
-static void
-i2DrainOutput(i2ChanStrPtr pCh, int timeout)
-{
- wait_queue_t wait;
- i2eBordStrPtr pB;
-
- ip2trace (CHANN, ITRC_DRAIN, ITRC_ENTER, 1, pCh->BookmarkTimer.expires);
-
- pB = pCh->pMyBord;
- // If the board has gone fatal, return bad,
- // and also hit the trap routine if it exists.
- if (pB->i2eFatal) {
- if (pB->i2eFatalTrap) {
- (*(pB)->i2eFatalTrap)(pB);
- }
- return;
- }
- if ((timeout > 0) && (pCh->BookmarkTimer.expires == 0 )) {
- // One per customer (channel)
- setup_timer(&pCh->BookmarkTimer, i2DrainWakeup,
- (unsigned long)pCh);
-
- ip2trace (CHANN, ITRC_DRAIN, 1, 1, pCh->BookmarkTimer.expires );
-
- mod_timer(&pCh->BookmarkTimer, jiffies + timeout);
- }
-
- i2QueueCommands( PTYPE_INLINE, pCh, -1, 1, CMD_BMARK_REQ );
-
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&(pCh->pBookmarkWait), &wait);
- set_current_state( TASK_INTERRUPTIBLE );
-
- serviceOutgoingFifo( pB );
-
- schedule(); // Now we take our interruptible sleep on
-
- // Clean up the queue
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&(pCh->pBookmarkWait), &wait);
-
- // if expires == 0 then timer poped, then do not need to del_timer
- if ((timeout > 0) && pCh->BookmarkTimer.expires &&
- time_before(jiffies, pCh->BookmarkTimer.expires)) {
- del_timer( &(pCh->BookmarkTimer) );
- pCh->BookmarkTimer.expires = 0;
-
- ip2trace (CHANN, ITRC_DRAIN, 3, 1, pCh->BookmarkTimer.expires );
-
- }
- ip2trace (CHANN, ITRC_DRAIN, ITRC_RETURN, 1, pCh->BookmarkTimer.expires );
- return;
-}
-
-//******************************************************************************
-// Function: i2OutputFree(pCh)
-// Parameters: Pointer to a channel structure
-// Returns: Space in output buffer
-//
-// Description:
-// Returns -1 if very gross error. Otherwise returns the amount of bytes still
-// free in the output buffer.
-//******************************************************************************
-static int
-i2OutputFree(i2ChanStrPtr pCh)
-{
- int amountToMove;
- unsigned long flags;
-
- // Ensure channel structure seems real
- if ( !i2Validate ( pCh ) ) {
- return -1;
- }
- read_lock_irqsave(&pCh->Obuf_spinlock, flags);
- amountToMove = pCh->Obuf_strip - pCh->Obuf_stuff - 1;
- read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
-
- if (amountToMove < 0) {
- amountToMove += OBUF_SIZE;
- }
- // If this is negative, we will discover later
- amountToMove -= sizeof(i2DataHeader);
-
- return (amountToMove < 0) ? 0 : amountToMove;
-}
-static void
-
-ip2_owake( PTTY tp)
-{
- i2ChanStrPtr pCh;
-
- if (tp == NULL) return;
-
- pCh = tp->driver_data;
-
- ip2trace (CHANN, ITRC_SICMD, 10, 2, tp->flags,
- (1 << TTY_DO_WRITE_WAKEUP) );
-
- tty_wakeup(tp);
-}
-
-static inline void
-set_baud_params(i2eBordStrPtr pB)
-{
- int i,j;
- i2ChanStrPtr *pCh;
-
- pCh = (i2ChanStrPtr *) pB->i2eChannelPtr;
-
- for (i = 0; i < ABS_MAX_BOXES; i++) {
- if (pB->channelBtypes.bid_value[i]) {
- if (BID_HAS_654(pB->channelBtypes.bid_value[i])) {
- for (j = 0; j < ABS_BIGGEST_BOX; j++) {
- if (pCh[i*16+j] == NULL)
- break;
- (pCh[i*16+j])->BaudBase = 921600; // MAX for ST654
- (pCh[i*16+j])->BaudDivisor = 96;
- }
- } else { // has cirrus cd1400
- for (j = 0; j < ABS_BIGGEST_BOX; j++) {
- if (pCh[i*16+j] == NULL)
- break;
- (pCh[i*16+j])->BaudBase = 115200; // MAX for CD1400
- (pCh[i*16+j])->BaudDivisor = 12;
- }
- }
- }
- }
-}
-
-//******************************************************************************
-// Function: i2StripFifo(pB)
-// Parameters: Pointer to a board structure
-// Returns: ?
-//
-// Description:
-// Strips all the available data from the incoming FIFO, identifies the type of
-// packet, and either buffers the data or does what needs to be done.
-//
-// Note there is no overflow checking here: if the board sends more data than it
-// ought to, we will not detect it here, but blindly overflow...
-//******************************************************************************
-
-// A buffer for reading in blocks for unknown channels
-static unsigned char junkBuffer[IBUF_SIZE];
-
-// A buffer to read in a status packet. Because of the size of the count field
-// for these things, the maximum packet size must be less than MAX_CMD_PACK_SIZE
-static unsigned char cmdBuffer[MAX_CMD_PACK_SIZE + 4];
-
-// This table changes the bit order from MSR order given by STAT_MODEM packet to
-// status bits used in our library.
-static char xlatDss[16] = {
-0 | 0 | 0 | 0 ,
-0 | 0 | 0 | I2_CTS ,
-0 | 0 | I2_DSR | 0 ,
-0 | 0 | I2_DSR | I2_CTS ,
-0 | I2_RI | 0 | 0 ,
-0 | I2_RI | 0 | I2_CTS ,
-0 | I2_RI | I2_DSR | 0 ,
-0 | I2_RI | I2_DSR | I2_CTS ,
-I2_DCD | 0 | 0 | 0 ,
-I2_DCD | 0 | 0 | I2_CTS ,
-I2_DCD | 0 | I2_DSR | 0 ,
-I2_DCD | 0 | I2_DSR | I2_CTS ,
-I2_DCD | I2_RI | 0 | 0 ,
-I2_DCD | I2_RI | 0 | I2_CTS ,
-I2_DCD | I2_RI | I2_DSR | 0 ,
-I2_DCD | I2_RI | I2_DSR | I2_CTS };
-
-static inline void
-i2StripFifo(i2eBordStrPtr pB)
-{
- i2ChanStrPtr pCh;
- int channel;
- int count;
- unsigned short stuffIndex;
- int amountToRead;
- unsigned char *pc, *pcLimit;
- unsigned char uc;
- unsigned char dss_change;
- unsigned long bflags,cflags;
-
-// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_ENTER, 0 );
-
- while (I2_HAS_INPUT(pB)) {
-// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 2, 0 );
-
- // Process packet from fifo a one atomic unit
- write_lock_irqsave(&pB->read_fifo_spinlock, bflags);
-
- // The first word (or two bytes) will have channel number and type of
- // packet, possibly other information
- pB->i2eLeadoffWord[0] = iiReadWord(pB);
-
- switch(PTYPE_OF(pB->i2eLeadoffWord))
- {
- case PTYPE_DATA:
- pB->got_input = 1;
-
-// ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 3, 0 );
-
- channel = CHANNEL_OF(pB->i2eLeadoffWord); /* Store channel */
- count = iiReadWord(pB); /* Count is in the next word */
-
-// NEW: Check the count for sanity! Should the hardware fail, our death
-// is more pleasant. While an oversize channel is acceptable (just more
-// than the driver supports), an over-length count clearly means we are
-// sick!
- if ( ((unsigned int)count) > IBUF_SIZE ) {
- pB->i2eFatal = 2;
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
- return; /* Bail out ASAP */
- }
- // Channel is illegally big ?
- if ((channel >= pB->i2eChannelCnt) ||
- (NULL==(pCh = ((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])))
- {
- iiReadBuf(pB, junkBuffer, count);
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
- break; /* From switch: ready for next packet */
- }
-
- // Channel should be valid, then
-
- // If this is a hot-key, merely post its receipt for now. These are
- // always supposed to be 1-byte packets, so we won't even check the
- // count. Also we will post an acknowledgement to the board so that
- // more data can be forthcoming. Note that we are not trying to use
- // these sequences in this driver, merely to robustly ignore them.
- if(ID_OF(pB->i2eLeadoffWord) == ID_HOT_KEY)
- {
- pCh->hotKeyIn = iiReadWord(pB) & 0xff;
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
- i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_HOTACK);
- break; /* From the switch: ready for next packet */
- }
-
- // Normal data! We crudely assume there is room for the data in our
- // buffer because the board wouldn't have exceeded his credit limit.
- write_lock_irqsave(&pCh->Ibuf_spinlock, cflags);
- // We have 2 locks now
- stuffIndex = pCh->Ibuf_stuff;
- amountToRead = IBUF_SIZE - stuffIndex;
- if (amountToRead > count)
- amountToRead = count;
-
- // stuffIndex would have been already adjusted so there would
- // always be room for at least one, and count is always at least
- // one.
-
- iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
- pCh->icount.rx += amountToRead;
-
- // Update the stuffIndex by the amount of data moved. Note we could
- // never ask for more data than would just fit. However, we might
- // have read in one more byte than we wanted because the read
- // rounds up to even bytes. If this byte is on the end of the
- // packet, and is padding, we ignore it. If the byte is part of
- // the actual data, we need to move it.
-
- stuffIndex += amountToRead;
-
- if (stuffIndex >= IBUF_SIZE) {
- if ((amountToRead & 1) && (count > amountToRead)) {
- pCh->Ibuf[0] = pCh->Ibuf[IBUF_SIZE];
- amountToRead++;
- stuffIndex = 1;
- } else {
- stuffIndex = 0;
- }
- }
-
- // If there is anything left over, read it as well
- if (count > amountToRead) {
- amountToRead = count - amountToRead;
- iiReadBuf(pB, &(pCh->Ibuf[stuffIndex]), amountToRead);
- pCh->icount.rx += amountToRead;
- stuffIndex += amountToRead;
- }
-
- // Update stuff index
- pCh->Ibuf_stuff = stuffIndex;
- write_unlock_irqrestore(&pCh->Ibuf_spinlock, cflags);
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
-
-#ifdef USE_IQ
- schedule_work(&pCh->tqueue_input);
-#else
- do_input(&pCh->tqueue_input);
-#endif
-
- // Note we do not need to maintain any flow-control credits at this
- // time: if we were to increment .asof and decrement .room, there
- // would be no net effect. Instead, when we strip data, we will
- // increment .asof and leave .room unchanged.
-
- break; // From switch: ready for next packet
-
- case PTYPE_STATUS:
- ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 4, 0 );
-
- count = CMD_COUNT_OF(pB->i2eLeadoffWord);
-
- iiReadBuf(pB, cmdBuffer, count);
- // We can release early with buffer grab
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
-
- pc = cmdBuffer;
- pcLimit = &(cmdBuffer[count]);
-
- while (pc < pcLimit) {
- channel = *pc++;
-
- ip2trace (channel, ITRC_SFIFO, 7, 2, channel, *pc );
-
- /* check for valid channel */
- if (channel < pB->i2eChannelCnt
- &&
- (pCh = (((i2ChanStrPtr*)pB->i2eChannelPtr)[channel])) != NULL
- )
- {
- dss_change = 0;
-
- switch (uc = *pc++)
- {
- /* Breaks and modem signals are easy: just update status */
- case STAT_CTS_UP:
- if ( !(pCh->dataSetIn & I2_CTS) )
- {
- pCh->dataSetIn |= I2_DCTS;
- pCh->icount.cts++;
- dss_change = 1;
- }
- pCh->dataSetIn |= I2_CTS;
- break;
-
- case STAT_CTS_DN:
- if ( pCh->dataSetIn & I2_CTS )
- {
- pCh->dataSetIn |= I2_DCTS;
- pCh->icount.cts++;
- dss_change = 1;
- }
- pCh->dataSetIn &= ~I2_CTS;
- break;
-
- case STAT_DCD_UP:
- ip2trace (channel, ITRC_MODEM, 1, 1, pCh->dataSetIn );
-
- if ( !(pCh->dataSetIn & I2_DCD) )
- {
- ip2trace (CHANN, ITRC_MODEM, 2, 0 );
- pCh->dataSetIn |= I2_DDCD;
- pCh->icount.dcd++;
- dss_change = 1;
- }
- pCh->dataSetIn |= I2_DCD;
-
- ip2trace (channel, ITRC_MODEM, 3, 1, pCh->dataSetIn );
- break;
-
- case STAT_DCD_DN:
- ip2trace (channel, ITRC_MODEM, 4, 1, pCh->dataSetIn );
- if ( pCh->dataSetIn & I2_DCD )
- {
- ip2trace (channel, ITRC_MODEM, 5, 0 );
- pCh->dataSetIn |= I2_DDCD;
- pCh->icount.dcd++;
- dss_change = 1;
- }
- pCh->dataSetIn &= ~I2_DCD;
-
- ip2trace (channel, ITRC_MODEM, 6, 1, pCh->dataSetIn );
- break;
-
- case STAT_DSR_UP:
- if ( !(pCh->dataSetIn & I2_DSR) )
- {
- pCh->dataSetIn |= I2_DDSR;
- pCh->icount.dsr++;
- dss_change = 1;
- }
- pCh->dataSetIn |= I2_DSR;
- break;
-
- case STAT_DSR_DN:
- if ( pCh->dataSetIn & I2_DSR )
- {
- pCh->dataSetIn |= I2_DDSR;
- pCh->icount.dsr++;
- dss_change = 1;
- }
- pCh->dataSetIn &= ~I2_DSR;
- break;
-
- case STAT_RI_UP:
- if ( !(pCh->dataSetIn & I2_RI) )
- {
- pCh->dataSetIn |= I2_DRI;
- pCh->icount.rng++;
- dss_change = 1;
- }
- pCh->dataSetIn |= I2_RI ;
- break;
-
- case STAT_RI_DN:
- // to be compat with serial.c
- //if ( pCh->dataSetIn & I2_RI )
- //{
- // pCh->dataSetIn |= I2_DRI;
- // pCh->icount.rng++;
- // dss_change = 1;
- //}
- pCh->dataSetIn &= ~I2_RI ;
- break;
-
- case STAT_BRK_DET:
- pCh->dataSetIn |= I2_BRK;
- pCh->icount.brk++;
- dss_change = 1;
- break;
-
- // Bookmarks? one less request we're waiting for
- case STAT_BMARK:
- pCh->bookMarks--;
- if (pCh->bookMarks <= 0 ) {
- pCh->bookMarks = 0;
- wake_up_interruptible( &pCh->pBookmarkWait );
-
- ip2trace (channel, ITRC_DRAIN, 20, 1, pCh->BookmarkTimer.expires );
- }
- break;
-
- // Flow control packets? Update the new credits, and if
- // someone was waiting for output, queue him up again.
- case STAT_FLOW:
- pCh->outfl.room =
- ((flowStatPtr)pc)->room -
- (pCh->outfl.asof - ((flowStatPtr)pc)->asof);
-
- ip2trace (channel, ITRC_STFLW, 1, 1, pCh->outfl.room );
-
- if (pCh->channelNeeds & NEED_CREDIT)
- {
- ip2trace (channel, ITRC_STFLW, 2, 1, pCh->channelNeeds);
-
- pCh->channelNeeds &= ~NEED_CREDIT;
- i2QueueNeeds(pB, pCh, NEED_INLINE);
- if ( pCh->pTTY )
- ip2_owake(pCh->pTTY);
- }
-
- ip2trace (channel, ITRC_STFLW, 3, 1, pCh->channelNeeds);
-
- pc += sizeof(flowStat);
- break;
-
- /* Special packets: */
- /* Just copy the information into the channel structure */
-
- case STAT_STATUS:
-
- pCh->channelStatus = *((debugStatPtr)pc);
- pc += sizeof(debugStat);
- break;
-
- case STAT_TXCNT:
-
- pCh->channelTcount = *((cntStatPtr)pc);
- pc += sizeof(cntStat);
- break;
-
- case STAT_RXCNT:
-
- pCh->channelRcount = *((cntStatPtr)pc);
- pc += sizeof(cntStat);
- break;
-
- case STAT_BOXIDS:
- pB->channelBtypes = *((bidStatPtr)pc);
- pc += sizeof(bidStat);
- set_baud_params(pB);
- break;
-
- case STAT_HWFAIL:
- i2QueueCommands (PTYPE_INLINE, pCh, 0, 1, CMD_HW_TEST);
- pCh->channelFail = *((failStatPtr)pc);
- pc += sizeof(failStat);
- break;
-
- /* No explicit match? then
- * Might be an error packet...
- */
- default:
- switch (uc & STAT_MOD_ERROR)
- {
- case STAT_ERROR:
- if (uc & STAT_E_PARITY) {
- pCh->dataSetIn |= I2_PAR;
- pCh->icount.parity++;
- }
- if (uc & STAT_E_FRAMING){
- pCh->dataSetIn |= I2_FRA;
- pCh->icount.frame++;
- }
- if (uc & STAT_E_OVERRUN){
- pCh->dataSetIn |= I2_OVR;
- pCh->icount.overrun++;
- }
- break;
-
- case STAT_MODEM:
- // the answer to DSS_NOW request (not change)
- pCh->dataSetIn = (pCh->dataSetIn
- & ~(I2_RI | I2_CTS | I2_DCD | I2_DSR) )
- | xlatDss[uc & 0xf];
- wake_up_interruptible ( &pCh->dss_now_wait );
- default:
- break;
- }
- } /* End of switch on status type */
- if (dss_change) {
-#ifdef USE_IQ
- schedule_work(&pCh->tqueue_status);
-#else
- do_status(&pCh->tqueue_status);
-#endif
- }
- }
- else /* Or else, channel is invalid */
- {
- // Even though the channel is invalid, we must test the
- // status to see how much additional data it has (to be
- // skipped)
- switch (*pc++)
- {
- case STAT_FLOW:
- pc += 4; /* Skip the data */
- break;
-
- default:
- break;
- }
- }
- } // End of while (there is still some status packet left)
- break;
-
- default: // Neither packet? should be impossible
- ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
- PTYPE_OF(pB->i2eLeadoffWord) );
- write_unlock_irqrestore(&pB->read_fifo_spinlock,
- bflags);
-
- break;
- } // End of switch on type of packets
- } /*while(board I2_HAS_INPUT)*/
-
- ip2trace (ITRC_NO_PORT, ITRC_SFIFO, ITRC_RETURN, 0 );
-
- // Send acknowledgement to the board even if there was no data!
- pB->i2eOutMailWaiting |= MB_IN_STRIPPED;
- return;
-}
-
-//******************************************************************************
-// Function: i2Write2Fifo(pB,address,count)
-// Parameters: Pointer to a board structure, source address, byte count
-// Returns: bytes written
-//
-// Description:
-// Writes count bytes to board io address(implied) from source
-// Adjusts count, leaves reserve for next time around bypass cmds
-//******************************************************************************
-static int
-i2Write2Fifo(i2eBordStrPtr pB, unsigned char *source, int count,int reserve)
-{
- int rc = 0;
- unsigned long flags;
- write_lock_irqsave(&pB->write_fifo_spinlock, flags);
- if (!pB->i2eWaitingForEmptyFifo) {
- if (pB->i2eFifoRemains > (count+reserve)) {
- pB->i2eFifoRemains -= count;
- iiWriteBuf(pB, source, count);
- pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
- rc = count;
- }
- }
- write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
- return rc;
-}
-//******************************************************************************
-// Function: i2StuffFifoBypass(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// Stuffs as many bypass commands into the fifo as possible. This is simpler
-// than stuffing data or inline commands to fifo, since we do not have
-// flow-control to deal with.
-//******************************************************************************
-static inline void
-i2StuffFifoBypass(i2eBordStrPtr pB)
-{
- i2ChanStrPtr pCh;
- unsigned char *pRemove;
- unsigned short stripIndex;
- unsigned short packetSize;
- unsigned short paddedSize;
- unsigned short notClogged = 1;
- unsigned long flags;
-
- int bailout = 1000;
-
- // Continue processing so long as there are entries, or there is room in the
- // fifo. Each entry represents a channel with something to do.
- while ( --bailout && notClogged &&
- (NULL != (pCh = i2DeQueueNeeds(pB,NEED_BYPASS))))
- {
- write_lock_irqsave(&pCh->Cbuf_spinlock, flags);
- stripIndex = pCh->Cbuf_strip;
-
- // as long as there are packets for this channel...
-
- while (stripIndex != pCh->Cbuf_stuff) {
- pRemove = &(pCh->Cbuf[stripIndex]);
- packetSize = CMD_COUNT_OF(pRemove) + sizeof(i2CmdHeader);
- paddedSize = roundup(packetSize, 2);
-
- if (paddedSize > 0) {
- if ( 0 == i2Write2Fifo(pB, pRemove, paddedSize,0)) {
- notClogged = 0; /* fifo full */
- i2QueueNeeds(pB, pCh, NEED_BYPASS); // Put back on queue
- break; // Break from the channel
- }
- }
-#ifdef DEBUG_FIFO
-WriteDBGBuf("BYPS", pRemove, paddedSize);
-#endif /* DEBUG_FIFO */
- pB->debugBypassCount++;
-
- pRemove += packetSize;
- stripIndex += packetSize;
- if (stripIndex >= CBUF_SIZE) {
- stripIndex = 0;
- pRemove = pCh->Cbuf;
- }
- }
- // Done with this channel. Move to next, removing this one from
- // the queue of channels if we cleaned it out (i.e., didn't get clogged.
- pCh->Cbuf_strip = stripIndex;
- write_unlock_irqrestore(&pCh->Cbuf_spinlock, flags);
- } // Either clogged or finished all the work
-
-#ifdef IP2DEBUG_TRACE
- if ( !bailout ) {
- ip2trace (ITRC_NO_PORT, ITRC_ERROR, 1, 0 );
- }
-#endif
-}
-
-//******************************************************************************
-// Function: i2StuffFifoFlow(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// Stuffs as many flow control packets into the fifo as possible. This is easier
-// even than doing normal bypass commands, because there is always at most one
-// packet, already assembled, for each channel.
-//******************************************************************************
-static inline void
-i2StuffFifoFlow(i2eBordStrPtr pB)
-{
- i2ChanStrPtr pCh;
- unsigned short paddedSize = roundup(sizeof(flowIn), 2);
-
- ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_ENTER, 2,
- pB->i2eFifoRemains, paddedSize );
-
- // Continue processing so long as there are entries, or there is room in the
- // fifo. Each entry represents a channel with something to do.
- while ( (NULL != (pCh = i2DeQueueNeeds(pB,NEED_FLOW)))) {
- pB->debugFlowCount++;
-
- // NO Chan LOCK needed ???
- if ( 0 == i2Write2Fifo(pB,(unsigned char *)&(pCh->infl),paddedSize,0)) {
- break;
- }
-#ifdef DEBUG_FIFO
- WriteDBGBuf("FLOW",(unsigned char *) &(pCh->infl), paddedSize);
-#endif /* DEBUG_FIFO */
-
- } // Either clogged or finished all the work
-
- ip2trace (ITRC_NO_PORT, ITRC_SFLOW, ITRC_RETURN, 0 );
-}
-
-//******************************************************************************
-// Function: i2StuffFifoInline(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// Stuffs as much data and inline commands into the fifo as possible. This is
-// the most complex fifo-stuffing operation, since there if now the channel
-// flow-control issue to deal with.
-//******************************************************************************
-static inline void
-i2StuffFifoInline(i2eBordStrPtr pB)
-{
- i2ChanStrPtr pCh;
- unsigned char *pRemove;
- unsigned short stripIndex;
- unsigned short packetSize;
- unsigned short paddedSize;
- unsigned short notClogged = 1;
- unsigned short flowsize;
- unsigned long flags;
-
- int bailout = 1000;
- int bailout2;
-
- ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_ENTER, 3, pB->i2eFifoRemains,
- pB->i2Dbuf_strip, pB->i2Dbuf_stuff );
-
- // Continue processing so long as there are entries, or there is room in the
- // fifo. Each entry represents a channel with something to do.
- while ( --bailout && notClogged &&
- (NULL != (pCh = i2DeQueueNeeds(pB,NEED_INLINE))) )
- {
- write_lock_irqsave(&pCh->Obuf_spinlock, flags);
- stripIndex = pCh->Obuf_strip;
-
- ip2trace (CHANN, ITRC_SICMD, 3, 2, stripIndex, pCh->Obuf_stuff );
-
- // as long as there are packets for this channel...
- bailout2 = 1000;
- while ( --bailout2 && stripIndex != pCh->Obuf_stuff) {
- pRemove = &(pCh->Obuf[stripIndex]);
-
- // Must determine whether this be a data or command packet to
- // calculate correctly the header size and the amount of
- // flow-control credit this type of packet will use.
- if (PTYPE_OF(pRemove) == PTYPE_DATA) {
- flowsize = DATA_COUNT_OF(pRemove);
- packetSize = flowsize + sizeof(i2DataHeader);
- } else {
- flowsize = CMD_COUNT_OF(pRemove);
- packetSize = flowsize + sizeof(i2CmdHeader);
- }
- flowsize = CREDIT_USAGE(flowsize);
- paddedSize = roundup(packetSize, 2);
-
- ip2trace (CHANN, ITRC_SICMD, 4, 2, pB->i2eFifoRemains, paddedSize );
-
- // If we don't have enough credits from the board to send the data,
- // flag the channel that we are waiting for flow control credit, and
- // break out. This will clean up this channel and remove us from the
- // queue of hot things to do.
-
- ip2trace (CHANN, ITRC_SICMD, 5, 2, pCh->outfl.room, flowsize );
-
- if (pCh->outfl.room <= flowsize) {
- // Do Not have the credits to send this packet.
- i2QueueNeeds(pB, pCh, NEED_CREDIT);
- notClogged = 0;
- break; // So to do next channel
- }
- if ( (paddedSize > 0)
- && ( 0 == i2Write2Fifo(pB, pRemove, paddedSize, 128))) {
- // Do Not have room in fifo to send this packet.
- notClogged = 0;
- i2QueueNeeds(pB, pCh, NEED_INLINE);
- break; // Break from the channel
- }
-#ifdef DEBUG_FIFO
-WriteDBGBuf("DATA", pRemove, paddedSize);
-#endif /* DEBUG_FIFO */
- pB->debugInlineCount++;
-
- pCh->icount.tx += flowsize;
- // Update current credits
- pCh->outfl.room -= flowsize;
- pCh->outfl.asof += flowsize;
- if (PTYPE_OF(pRemove) == PTYPE_DATA) {
- pCh->Obuf_char_count -= DATA_COUNT_OF(pRemove);
- }
- pRemove += packetSize;
- stripIndex += packetSize;
-
- ip2trace (CHANN, ITRC_SICMD, 6, 2, stripIndex, pCh->Obuf_strip);
-
- if (stripIndex >= OBUF_SIZE) {
- stripIndex = 0;
- pRemove = pCh->Obuf;
-
- ip2trace (CHANN, ITRC_SICMD, 7, 1, stripIndex );
-
- }
- } /* while */
- if ( !bailout2 ) {
- ip2trace (CHANN, ITRC_ERROR, 3, 0 );
- }
- // Done with this channel. Move to next, removing this one from the
- // queue of channels if we cleaned it out (i.e., didn't get clogged.
- pCh->Obuf_strip = stripIndex;
- write_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
- if ( notClogged )
- {
-
- ip2trace (CHANN, ITRC_SICMD, 8, 0 );
-
- if ( pCh->pTTY ) {
- ip2_owake(pCh->pTTY);
- }
- }
- } // Either clogged or finished all the work
-
- if ( !bailout ) {
- ip2trace (ITRC_NO_PORT, ITRC_ERROR, 4, 0 );
- }
-
- ip2trace (ITRC_NO_PORT, ITRC_SICMD, ITRC_RETURN, 1,pB->i2Dbuf_strip);
-}
-
-//******************************************************************************
-// Function: serviceOutgoingFifo(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// Helper routine to put data in the outgoing fifo, if we aren't already waiting
-// for something to be there. If the fifo has only room for a very little data,
-// go head and hit the board with a mailbox hit immediately. Otherwise, it will
-// have to happen later in the interrupt processing. Since this routine may be
-// called both at interrupt and foreground time, we must turn off interrupts
-// during the entire process.
-//******************************************************************************
-static void
-serviceOutgoingFifo(i2eBordStrPtr pB)
-{
- // If we aren't currently waiting for the board to empty our fifo, service
- // everything that is pending, in priority order (especially, Bypass before
- // Inline).
- if ( ! pB->i2eWaitingForEmptyFifo )
- {
- i2StuffFifoFlow(pB);
- i2StuffFifoBypass(pB);
- i2StuffFifoInline(pB);
-
- iiSendPendingMail(pB);
- }
-}
-
-//******************************************************************************
-// Function: i2ServiceBoard(pB)
-// Parameters: Pointer to a board structure
-// Returns: Nothing
-//
-// Description:
-// Normally this is called from interrupt level, but there is deliberately
-// nothing in here specific to being called from interrupt level. All the
-// hardware-specific, interrupt-specific things happen at the outer levels.
-//
-// For example, a timer interrupt could drive this routine for some sort of
-// polled operation. The only requirement is that the programmer deal with any
-// atomiticity/concurrency issues that result.
-//
-// This routine responds to the board's having sent mailbox information to the
-// host (which would normally cause an interrupt). This routine reads the
-// incoming mailbox. If there is no data in it, this board did not create the
-// interrupt and/or has nothing to be done to it. (Except, if we have been
-// waiting to write mailbox data to it, we may do so.
-//
-// Based on the value in the mailbox, we may take various actions.
-//
-// No checking here of pB validity: after all, it shouldn't have been called by
-// the handler unless pB were on the list.
-//******************************************************************************
-static inline int
-i2ServiceBoard ( i2eBordStrPtr pB )
-{
- unsigned inmail;
- unsigned long flags;
-
-
- /* This should be atomic because of the way we are called... */
- if (NO_MAIL_HERE == ( inmail = pB->i2eStartMail ) ) {
- inmail = iiGetMail(pB);
- }
- pB->i2eStartMail = NO_MAIL_HERE;
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 2, 1, inmail );
-
- if (inmail != NO_MAIL_HERE) {
- // If the board has gone fatal, nothing to do but hit a bit that will
- // alert foreground tasks to protest!
- if ( inmail & MB_FATAL_ERROR ) {
- pB->i2eFatal = 1;
- goto exit_i2ServiceBoard;
- }
-
- /* Assuming no fatal condition, we proceed to do work */
- if ( inmail & MB_IN_STUFFED ) {
- pB->i2eFifoInInts++;
- i2StripFifo(pB); /* There might be incoming packets */
- }
-
- if (inmail & MB_OUT_STRIPPED) {
- pB->i2eFifoOutInts++;
- write_lock_irqsave(&pB->write_fifo_spinlock, flags);
- pB->i2eFifoRemains = pB->i2eFifoSize;
- pB->i2eWaitingForEmptyFifo = 0;
- write_unlock_irqrestore(&pB->write_fifo_spinlock,
- flags);
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 30, 1, pB->i2eFifoRemains );
-
- }
- serviceOutgoingFifo(pB);
- }
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 8, 0 );
-
-exit_i2ServiceBoard:
-
- return 0;
-}
diff --git a/drivers/char/ip2/i2lib.h b/drivers/char/ip2/i2lib.h
deleted file mode 100644
index e559e9b..0000000
--- a/drivers/char/ip2/i2lib.h
+++ /dev/null
@@ -1,351 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Header file for high level library functions
-*
-*******************************************************************************/
-#ifndef I2LIB_H
-#define I2LIB_H 1
-//------------------------------------------------------------------------------
-// I2LIB.H
-//
-// IntelliPort-II and IntelliPort-IIEX
-//
-// Defines, structure definitions, and external declarations for i2lib.c
-//------------------------------------------------------------------------------
-//--------------------------------------
-// Mandatory Includes:
-//--------------------------------------
-#include "ip2types.h"
-#include "i2ellis.h"
-#include "i2pack.h"
-#include "i2cmd.h"
-#include <linux/workqueue.h>
-
-//------------------------------------------------------------------------------
-// i2ChanStr -- Channel Structure:
-// Used to track per-channel information for the library routines using standard
-// loadware. Note also, a pointer to an array of these structures is patched
-// into the i2eBordStr (see i2ellis.h)
-//------------------------------------------------------------------------------
-//
-// If we make some limits on the maximum block sizes, we can avoid dealing with
-// buffer wrap. The wrapping of the buffer is based on where the start of the
-// packet is. Then there is always room for the packet contiguously.
-//
-// Maximum total length of an outgoing data or in-line command block. The limit
-// of 36 on data is quite arbitrary and based more on DOS memory limitations
-// than the board interface. However, for commands, the maximum packet length is
-// MAX_CMD_PACK_SIZE, because the field size for the count is only a few bits
-// (see I2PACK.H) in such packets. For data packets, the count field size is not
-// the limiting factor. As of this writing, MAX_OBUF_BLOCK < MAX_CMD_PACK_SIZE,
-// but be careful if wanting to modify either.
-//
-#define MAX_OBUF_BLOCK 36
-
-// Another note on maximum block sizes: we are buffering packets here. Data is
-// put into the buffer (if there is room) regardless of the credits from the
-// board. The board sends new credits whenever it has removed from his buffers a
-// number of characters equal to 80% of total buffer size. (Of course, the total
-// buffer size is what is reported when the very first set of flow control
-// status packets are received from the board. Therefore, to be robust, you must
-// always fill the board to at least 80% of the current credit limit, else you
-// might not give it enough to trigger a new report. These conditions are
-// obtained here so long as the maximum output block size is less than 20% the
-// size of the board's output buffers. This is true at present by "coincidence"
-// or "infernal knowledge": the board's output buffers are at least 700 bytes
-// long (20% = 140 bytes, at least). The 80% figure is "official", so the safest
-// strategy might be to trap the first flow control report and guarantee that
-// the effective maxObufBlock is the minimum of MAX_OBUF_BLOCK and 20% of first
-// reported buffer credit.
-//
-#define MAX_CBUF_BLOCK 6 // Maximum total length of a bypass command block
-
-#define IBUF_SIZE 512 // character capacity of input buffer per channel
-#define OBUF_SIZE 1024// character capacity of output buffer per channel
-#define CBUF_SIZE 10 // character capacity of output bypass buffer
-
-typedef struct _i2ChanStr
-{
- // First, back-pointers so that given a pointer to this structure, you can
- // determine the correct board and channel number to reference, (say, when
- // issuing commands, etc. (Note, channel number is in infl.hd.i2sChannel.)
-
- int port_index; // Index of port in channel structure array attached
- // to board structure.
- PTTY pTTY; // Pointer to tty structure for port (OS specific)
- USHORT validity; // Indicates whether the given channel has been
- // initialized, really exists (or is a missing
- // channel, e.g. channel 9 on an 8-port box.)
-
- i2eBordStrPtr pMyBord; // Back-pointer to this channel's board structure
-
- int wopen; // waiting fer carrier
-
- int throttled; // Set if upper layer can take no data
-
- int flags; // Defined in tty.h
-
- PWAITQ open_wait; // Pointer for OS sleep function.
- PWAITQ close_wait; // Pointer for OS sleep function.
- PWAITQ delta_msr_wait;// Pointer for OS sleep function.
- PWAITQ dss_now_wait; // Pointer for OS sleep function.
-
- struct timer_list BookmarkTimer; // Used by i2DrainOutput
- wait_queue_head_t pBookmarkWait; // Used by i2DrainOutput
-
- int BaudBase;
- int BaudDivisor;
-
- USHORT ClosingDelay;
- USHORT ClosingWaitTime;
-
- volatile
- flowIn infl; // This structure is initialized as a completely
- // formed flow-control command packet, and as such
- // has the channel number, also the capacity and
- // "as-of" data needed continuously.
-
- USHORT sinceLastFlow; // Counts the number of characters read from input
- // buffers, since the last time flow control info
- // was sent.
-
- USHORT whenSendFlow; // Determines when new flow control is to be sent to
- // the board. Note unlike earlier manifestations of
- // the driver, these packets can be sent from
- // in-place.
-
- USHORT channelNeeds; // Bit map of important things which must be done
- // for this channel. (See bits below )
-
- volatile
- flowStat outfl; // Same type of structure is used to hold current
- // flow control information used to control our
- // output. "asof" is kept updated as data is sent,
- // and "room" never goes to zero.
-
- // The incoming ring buffer
- // Unlike the outgoing buffers, this holds raw data, not packets. The two
- // extra bytes are used to hold the byte-padding when there is room for an
- // odd number of bytes before we must wrap.
- //
- UCHAR Ibuf[IBUF_SIZE + 2];
- volatile
- USHORT Ibuf_stuff; // Stuffing index
- volatile
- USHORT Ibuf_strip; // Stripping index
-
- // The outgoing ring-buffer: Holds Data and command packets. N.B., even
- // though these are in the channel structure, the channel is also written
- // here, the easier to send it to the fifo when ready. HOWEVER, individual
- // packets here are NOT padded to even length: the routines for writing
- // blocks to the fifo will pad to even byte counts.
- //
- UCHAR Obuf[OBUF_SIZE+MAX_OBUF_BLOCK+4];
- volatile
- USHORT Obuf_stuff; // Stuffing index
- volatile
- USHORT Obuf_strip; // Stripping index
- int Obuf_char_count;
-
- // The outgoing bypass-command buffer. Unlike earlier manifestations, the
- // flow control packets are sent directly from the structures. As above, the
- // channel number is included in the packet, but they are NOT padded to even
- // size.
- //
- UCHAR Cbuf[CBUF_SIZE+MAX_CBUF_BLOCK+2];
- volatile
- USHORT Cbuf_stuff; // Stuffing index
- volatile
- USHORT Cbuf_strip; // Stripping index
-
- // The temporary buffer for the Linux tty driver PutChar entry.
- //
- UCHAR Pbuf[MAX_OBUF_BLOCK - sizeof (i2DataHeader)];
- volatile
- USHORT Pbuf_stuff; // Stuffing index
-
- // The state of incoming data-set signals
- //
- USHORT dataSetIn; // Bit-mapped according to below. Also indicates
- // whether a break has been detected since last
- // inquiry.
-
- // The state of outcoming data-set signals (as far as we can tell!)
- //
- USHORT dataSetOut; // Bit-mapped according to below.
-
- // Most recent hot-key identifier detected
- //
- USHORT hotKeyIn; // Hot key as sent by the board, HOT_CLEAR indicates
- // no hot key detected since last examined.
-
- // Counter of outstanding requests for bookmarks
- //
- short bookMarks; // Number of outstanding bookmark requests, (+ive
- // whenever a bookmark request if queued up, -ive
- // whenever a bookmark is received).
-
- // Misc options
- //
- USHORT channelOptions; // See below
-
- // To store various incoming special packets
- //
- debugStat channelStatus;
- cntStat channelRcount;
- cntStat channelTcount;
- failStat channelFail;
-
- // To store the last values for line characteristics we sent to the board.
- //
- int speed;
-
- int flush_flags;
-
- void (*trace)(unsigned short,unsigned char,unsigned char,unsigned long,...);
-
- /*
- * Kernel counters for the 4 input interrupts
- */
- struct async_icount icount;
-
- /*
- * Task queues for processing input packets from the board.
- */
- struct work_struct tqueue_input;
- struct work_struct tqueue_status;
- struct work_struct tqueue_hangup;
-
- rwlock_t Ibuf_spinlock;
- rwlock_t Obuf_spinlock;
- rwlock_t Cbuf_spinlock;
- rwlock_t Pbuf_spinlock;
-
-} i2ChanStr, *i2ChanStrPtr;
-
-//---------------------------------------------------
-// Manifests and bit-maps for elements in i2ChanStr
-//---------------------------------------------------
-//
-// flush flags
-//
-#define STARTFL_FLAG 1
-#define STOPFL_FLAG 2
-
-// validity
-//
-#define CHANNEL_MAGIC_BITS 0xff00
-#define CHANNEL_MAGIC 0x5300 // (validity & CHANNEL_MAGIC_BITS) ==
- // CHANNEL_MAGIC --> structure good
-
-#define CHANNEL_SUPPORT 0x0001 // Indicates channel is supported, exists,
- // and passed P.O.S.T.
-
-// channelNeeds
-//
-#define NEED_FLOW 1 // Indicates flow control has been queued
-#define NEED_INLINE 2 // Indicates inline commands or data queued
-#define NEED_BYPASS 4 // Indicates bypass commands queued
-#define NEED_CREDIT 8 // Indicates would be sending except has not sufficient
- // credit. The data is still in the channel structure,
- // but the channel is not enqueued in the board
- // structure again until there is a credit received from
- // the board.
-
-// dataSetIn (Also the bits for i2GetStatus return value)
-//
-#define I2_DCD 1
-#define I2_CTS 2
-#define I2_DSR 4
-#define I2_RI 8
-
-// dataSetOut (Also the bits for i2GetStatus return value)
-//
-#define I2_DTR 1
-#define I2_RTS 2
-
-// i2GetStatus() can optionally clear these bits
-//
-#define I2_BRK 0x10 // A break was detected
-#define I2_PAR 0x20 // A parity error was received
-#define I2_FRA 0x40 // A framing error was received
-#define I2_OVR 0x80 // An overrun error was received
-
-// i2GetStatus() automatically clears these bits */
-//
-#define I2_DDCD 0x100 // DCD changed from its former value
-#define I2_DCTS 0x200 // CTS changed from its former value
-#define I2_DDSR 0x400 // DSR changed from its former value
-#define I2_DRI 0x800 // RI changed from its former value
-
-// hotKeyIn
-//
-#define HOT_CLEAR 0x1322 // Indicates that no hot-key has been detected
-
-// channelOptions
-//
-#define CO_NBLOCK_WRITE 1 // Writes don't block waiting for buffer. (Default
- // is, they do wait.)
-
-// fcmodes
-//
-#define I2_OUTFLOW_CTS 0x0001
-#define I2_INFLOW_RTS 0x0002
-#define I2_INFLOW_DSR 0x0004
-#define I2_INFLOW_DTR 0x0008
-#define I2_OUTFLOW_DSR 0x0010
-#define I2_OUTFLOW_DTR 0x0020
-#define I2_OUTFLOW_XON 0x0040
-#define I2_OUTFLOW_XANY 0x0080
-#define I2_INFLOW_XON 0x0100
-
-#define I2_CRTSCTS (I2_OUTFLOW_CTS|I2_INFLOW_RTS)
-#define I2_IXANY_MODE (I2_OUTFLOW_XON|I2_OUTFLOW_XANY)
-
-//-------------------------------------------
-// Macros used from user level like functions
-//-------------------------------------------
-
-// Macros to set and clear channel options
-//
-#define i2SetOption(pCh, option) pCh->channelOptions |= option
-#define i2ClrOption(pCh, option) pCh->channelOptions &= ~option
-
-// Macro to set fatal-error trap
-//
-#define i2SetFatalTrap(pB, routine) pB->i2eFatalTrap = routine
-
-//--------------------------------------------
-// Declarations and prototypes for i2lib.c
-//--------------------------------------------
-//
-static int i2InitChannels(i2eBordStrPtr, int, i2ChanStrPtr);
-static int i2QueueCommands(int, i2ChanStrPtr, int, int, cmdSyntaxPtr,...);
-static int i2GetStatus(i2ChanStrPtr, int);
-static int i2Input(i2ChanStrPtr);
-static int i2InputFlush(i2ChanStrPtr);
-static int i2Output(i2ChanStrPtr, const char *, int);
-static int i2OutputFree(i2ChanStrPtr);
-static int i2ServiceBoard(i2eBordStrPtr);
-static void i2DrainOutput(i2ChanStrPtr, int);
-
-#ifdef IP2DEBUG_TRACE
-void ip2trace(unsigned short,unsigned char,unsigned char,unsigned long,...);
-#else
-#define ip2trace(a,b,c,d...) do {} while (0)
-#endif
-
-// Argument to i2QueueCommands
-//
-#define C_IN_LINE 1
-#define C_BYPASS 0
-
-#endif // I2LIB_H
diff --git a/drivers/char/ip2/i2pack.h b/drivers/char/ip2/i2pack.h
deleted file mode 100644
index 00342a6..0000000
--- a/drivers/char/ip2/i2pack.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Definitions of the packets used to transfer data and commands
-* Host <--> Board. Information provided here is only applicable
-* when the standard loadware is active.
-*
-*******************************************************************************/
-#ifndef I2PACK_H
-#define I2PACK_H 1
-
-//-----------------------------------------------
-// Revision History:
-//
-// 10 October 1991 MAG First draft
-// 24 February 1992 MAG Additions for 1.4.x loadware
-// 11 March 1992 MAG New status packets
-//
-//-----------------------------------------------
-
-//------------------------------------------------------------------------------
-// Packet Formats:
-//
-// Information passes between the host and board through the FIFO in packets.
-// These have headers which indicate the type of packet. Because the fifo data
-// path may be 16-bits wide, the protocol is constrained such that each packet
-// is always padded to an even byte count. (The lower-level interface routines
-// -- i2ellis.c -- are designed to do this).
-//
-// The sender (be it host or board) must place some number of complete packets
-// in the fifo, then place a message in the mailbox that packets are available.
-// Placing such a message interrupts the "receiver" (be it board or host), who
-// reads the mailbox message and determines that there are incoming packets
-// ready. Since there are no partial packets, and the length of a packet is
-// given in the header, the remainder of the packet can be read without checking
-// for FIFO empty condition. The process is repeated, packet by packet, until
-// the incoming FIFO is empty. Then the receiver uses the outbound mailbox to
-// signal the board that it has read the data. Only then can the sender place
-// additional data in the fifo.
-//------------------------------------------------------------------------------
-//
-//------------------------------------------------
-// Definition of Packet Header Area
-//------------------------------------------------
-//
-// Caution: these only define header areas. In actual use the data runs off
-// beyond the end of these structures.
-//
-// Since these structures are based on sequences of bytes which go to the board,
-// there cannot be ANY padding between the elements.
-#pragma pack(1)
-
-//----------------------------
-// DATA PACKETS
-//----------------------------
-
-typedef struct _i2DataHeader
-{
- unsigned char i2sChannel; /* The channel number: 0-255 */
-
- // -- Bitfields are allocated LSB first --
-
- // For incoming data, indicates whether this is an ordinary packet or a
- // special one (e.g., hot key hit).
- unsigned i2sId : 2 __attribute__ ((__packed__));
-
- // For tagging data packets. There are flush commands which flush only data
- // packets bearing a particular tag. (used in implementing IntelliView and
- // IntelliPrint). THE TAG VALUE 0xf is RESERVED and must not be used (it has
- // meaning internally to the loadware).
- unsigned i2sTag : 4;
-
- // These two bits determine the type of packet sent/received.
- unsigned i2sType : 2;
-
- // The count of data to follow: does not include the possible additional
- // padding byte. MAXIMUM COUNT: 4094. The top four bits must be 0.
- unsigned short i2sCount;
-
-} i2DataHeader, *i2DataHeaderPtr;
-
-// Structure is immediately followed by the data, proper.
-
-//----------------------------
-// NON-DATA PACKETS
-//----------------------------
-
-typedef struct _i2CmdHeader
-{
- unsigned char i2sChannel; // The channel number: 0-255 (Except where noted
- // - see below
-
- // Number of bytes of commands, status or whatever to follow
- unsigned i2sCount : 6;
-
- // These two bits determine the type of packet sent/received.
- unsigned i2sType : 2;
-
-} i2CmdHeader, *i2CmdHeaderPtr;
-
-// Structure is immediately followed by the applicable data.
-
-//---------------------------------------
-// Flow Control Packets (Outbound)
-//---------------------------------------
-
-// One type of outbound command packet is so important that the entire structure
-// is explicitly defined here. That is the flow-control packet. This is never
-// sent by user-level code (as would be the commands to raise/lower DTR, for
-// example). These are only sent by the library routines in response to reading
-// incoming data into the buffers.
-//
-// The parameters inside the command block are maintained in place, then the
-// block is sent at the appropriate time.
-
-typedef struct _flowIn
-{
- i2CmdHeader hd; // Channel #, count, type (see above)
- unsigned char fcmd; // The flow control command (37)
- unsigned short asof; // As of byte number "asof" (LSB first!) I have room
- // for "room" bytes
- unsigned short room;
-} flowIn, *flowInPtr;
-
-//----------------------------------------
-// (Incoming) Status Packets
-//----------------------------------------
-
-// Incoming packets which are non-data packets are status packets. In this case,
-// the channel number in the header is unimportant. What follows are one or more
-// sub-packets, the first word of which consists of the channel (first or low
-// byte) and the status indicator (second or high byte), followed by possibly
-// more data.
-
-#define STAT_CTS_UP 0 /* CTS raised (no other bytes) */
-#define STAT_CTS_DN 1 /* CTS dropped (no other bytes) */
-#define STAT_DCD_UP 2 /* DCD raised (no other bytes) */
-#define STAT_DCD_DN 3 /* DCD dropped (no other bytes) */
-#define STAT_DSR_UP 4 /* DSR raised (no other bytes) */
-#define STAT_DSR_DN 5 /* DSR dropped (no other bytes) */
-#define STAT_RI_UP 6 /* RI raised (no other bytes) */
-#define STAT_RI_DN 7 /* RI dropped (no other bytes) */
-#define STAT_BRK_DET 8 /* BRK detect (no other bytes) */
-#define STAT_FLOW 9 /* Flow control(-- more: see below */
-#define STAT_BMARK 10 /* Bookmark (no other bytes)
- * Bookmark is sent as a response to
- * a command 60: request for bookmark
- */
-#define STAT_STATUS 11 /* Special packet: see below */
-#define STAT_TXCNT 12 /* Special packet: see below */
-#define STAT_RXCNT 13 /* Special packet: see below */
-#define STAT_BOXIDS 14 /* Special packet: see below */
-#define STAT_HWFAIL 15 /* Special packet: see below */
-
-#define STAT_MOD_ERROR 0xc0
-#define STAT_MODEM 0xc0/* If status & STAT_MOD_ERROR:
- * == STAT_MODEM, then this is a modem
- * status packet, given in response to a
- * CMD_DSS_NOW command.
- * The low nibble has each data signal:
- */
-#define STAT_MOD_DCD 0x8
-#define STAT_MOD_RI 0x4
-#define STAT_MOD_DSR 0x2
-#define STAT_MOD_CTS 0x1
-
-#define STAT_ERROR 0x80/* If status & STAT_MOD_ERROR
- * == STAT_ERROR, then
- * sort of error on the channel.
- * The remaining seven bits indicate
- * what sort of error it is.
- */
-/* The low three bits indicate parity, framing, or overrun errors */
-
-#define STAT_E_PARITY 4 /* Parity error */
-#define STAT_E_FRAMING 2 /* Framing error */
-#define STAT_E_OVERRUN 1 /* (uxart) overrun error */
-
-//---------------------------------------
-// STAT_FLOW packets
-//---------------------------------------
-
-typedef struct _flowStat
-{
- unsigned short asof;
- unsigned short room;
-}flowStat, *flowStatPtr;
-
-// flowStat packets are received from the board to regulate the flow of outgoing
-// data. A local copy of this structure is also kept to track the amount of
-// credits used and credits remaining. "room" is the amount of space in the
-// board's buffers, "as of" having received a certain byte number. When sending
-// data to the fifo, you must calculate how much buffer space your packet will
-// use. Add this to the current "asof" and subtract it from the current "room".
-//
-// The calculation for the board's buffer is given by CREDIT_USAGE, where size
-// is the un-rounded count of either data characters or command characters.
-// (Which is to say, the count rounded up, plus two).
-
-#define CREDIT_USAGE(size) (((size) + 3) & ~1)
-
-//---------------------------------------
-// STAT_STATUS packets
-//---------------------------------------
-
-typedef struct _debugStat
-{
- unsigned char d_ccsr;
- unsigned char d_txinh;
- unsigned char d_stat1;
- unsigned char d_stat2;
-} debugStat, *debugStatPtr;
-
-// debugStat packets are sent to the host in response to a CMD_GET_STATUS
-// command. Each byte is bit-mapped as described below:
-
-#define D_CCSR_XON 2 /* Has received XON, ready to transmit */
-#define D_CCSR_XOFF 4 /* Has received XOFF, not transmitting */
-#define D_CCSR_TXENAB 8 /* Transmitter is enabled */
-#define D_CCSR_RXENAB 0x80 /* Receiver is enabled */
-
-#define D_TXINH_BREAK 1 /* We are sending a break */
-#define D_TXINH_EMPTY 2 /* No data to send */
-#define D_TXINH_SUSP 4 /* Output suspended via command 57 */
-#define D_TXINH_CMD 8 /* We are processing an in-line command */
-#define D_TXINH_LCD 0x10 /* LCD diagnostics are running */
-#define D_TXINH_PAUSE 0x20 /* We are processing a PAUSE command */
-#define D_TXINH_DCD 0x40 /* DCD is low, preventing transmission */
-#define D_TXINH_DSR 0x80 /* DSR is low, preventing transmission */
-
-#define D_STAT1_TXEN 1 /* Transmit INTERRUPTS enabled */
-#define D_STAT1_RXEN 2 /* Receiver INTERRUPTS enabled */
-#define D_STAT1_MDEN 4 /* Modem (data set sigs) interrupts enabled */
-#define D_STAT1_RLM 8 /* Remote loopback mode selected */
-#define D_STAT1_LLM 0x10 /* Local internal loopback mode selected */
-#define D_STAT1_CTS 0x20 /* CTS is low, preventing transmission */
-#define D_STAT1_DTR 0x40 /* DTR is low, to stop remote transmission */
-#define D_STAT1_RTS 0x80 /* RTS is low, to stop remote transmission */
-
-#define D_STAT2_TXMT 1 /* Transmit buffers are all empty */
-#define D_STAT2_RXMT 2 /* Receive buffers are all empty */
-#define D_STAT2_RXINH 4 /* Loadware has tried to inhibit remote
- * transmission: dropped DTR, sent XOFF,
- * whatever...
- */
-#define D_STAT2_RXFLO 8 /* Loadware can send no more data to host
- * until it receives a flow-control packet
- */
-//-----------------------------------------
-// STAT_TXCNT and STAT_RXCNT packets
-//----------------------------------------
-
-typedef struct _cntStat
-{
- unsigned short cs_time; // (Assumes host is little-endian!)
- unsigned short cs_count;
-} cntStat, *cntStatPtr;
-
-// These packets are sent in response to a CMD_GET_RXCNT or a CMD_GET_TXCNT
-// bypass command. cs_time is a running 1 Millisecond counter which acts as a
-// time stamp. cs_count is a running counter of data sent or received from the
-// uxarts. (Not including data added by the chip itself, as with CRLF
-// processing).
-//------------------------------------------
-// STAT_HWFAIL packets
-//------------------------------------------
-
-typedef struct _failStat
-{
- unsigned char fs_written;
- unsigned char fs_read;
- unsigned short fs_address;
-} failStat, *failStatPtr;
-
-// This packet is sent whenever the on-board diagnostic process detects an
-// error. At startup, this process is dormant. The host can wake it up by
-// issuing the bypass command CMD_HW_TEST. The process runs at low priority and
-// performs continuous hardware verification; writing data to certain on-board
-// registers, reading it back, and comparing. If it detects an error, this
-// packet is sent to the host, and the process goes dormant again until the host
-// sends another CMD_HW_TEST. It then continues with the next register to be
-// tested.
-
-//------------------------------------------------------------------------------
-// Macros to deal with the headers more easily! Note that these are defined so
-// they may be used as "left" as well as "right" expressions.
-//------------------------------------------------------------------------------
-
-// Given a pointer to the packet, reference the channel number
-//
-#define CHANNEL_OF(pP) ((i2DataHeaderPtr)(pP))->i2sChannel
-
-// Given a pointer to the packet, reference the Packet type
-//
-#define PTYPE_OF(pP) ((i2DataHeaderPtr)(pP))->i2sType
-
-// The possible types of packets
-//
-#define PTYPE_DATA 0 /* Host <--> Board */
-#define PTYPE_BYPASS 1 /* Host ---> Board */
-#define PTYPE_INLINE 2 /* Host ---> Board */
-#define PTYPE_STATUS 2 /* Host <--- Board */
-
-// Given a pointer to a Data packet, reference the Tag
-//
-#define TAG_OF(pP) ((i2DataHeaderPtr)(pP))->i2sTag
-
-// Given a pointer to a Data packet, reference the data i.d.
-//
-#define ID_OF(pP) ((i2DataHeaderPtr)(pP))->i2sId
-
-// The possible types of ID's
-//
-#define ID_ORDINARY_DATA 0
-#define ID_HOT_KEY 1
-
-// Given a pointer to a Data packet, reference the count
-//
-#define DATA_COUNT_OF(pP) ((i2DataHeaderPtr)(pP))->i2sCount
-
-// Given a pointer to a Data packet, reference the beginning of data
-//
-#define DATA_OF(pP) &((unsigned char *)(pP))[4] // 4 = size of header
-
-// Given a pointer to a Non-Data packet, reference the count
-//
-#define CMD_COUNT_OF(pP) ((i2CmdHeaderPtr)(pP))->i2sCount
-
-#define MAX_CMD_PACK_SIZE 62 // Maximum size of such a count
-
-// Given a pointer to a Non-Data packet, reference the beginning of data
-//
-#define CMD_OF(pP) &((unsigned char *)(pP))[2] // 2 = size of header
-
-//--------------------------------
-// MailBox Bits:
-//--------------------------------
-
-//--------------------------
-// Outgoing (host to board)
-//--------------------------
-//
-#define MB_OUT_STUFFED 0x80 // Host has placed output in fifo
-#define MB_IN_STRIPPED 0x40 // Host has read in all input from fifo
-
-//--------------------------
-// Incoming (board to host)
-//--------------------------
-//
-#define MB_IN_STUFFED 0x80 // Board has placed input in fifo
-#define MB_OUT_STRIPPED 0x40 // Board has read all output from fifo
-#define MB_FATAL_ERROR 0x20 // Board has encountered a fatal error
-
-#pragma pack() // Reset padding to command-line default
-
-#endif // I2PACK_H
-
diff --git a/drivers/char/ip2/ip2.h b/drivers/char/ip2/ip2.h
deleted file mode 100644
index 936ccc5..0000000
--- a/drivers/char/ip2/ip2.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Driver constants for configuration and tuning
-*
-* NOTES:
-*
-*******************************************************************************/
-#ifndef IP2_H
-#define IP2_H
-
-#include "ip2types.h"
-#include "i2cmd.h"
-
-/*************/
-/* Constants */
-/*************/
-
-/* Device major numbers - since version 2.0.26. */
-#define IP2_TTY_MAJOR 71
-#define IP2_CALLOUT_MAJOR 72
-#define IP2_IPL_MAJOR 73
-
-/* Board configuration array.
- * This array defines the hardware irq and address for up to IP2_MAX_BOARDS
- * (4 supported per ip2_types.h) ISA board addresses and irqs MUST be specified,
- * PCI and EISA boards are probed for and automagicly configed
- * iff the addresses are set to 1 and 2 respectivily.
- * 0x0100 - 0x03f0 == ISA
- * 1 == PCI
- * 2 == EISA
- * 0 == (skip this board)
- * This array defines the hardware addresses for them. Special
- * addresses are EISA and PCI which go sniffing for boards.
-
- * In a multiboard system the position in the array determines which port
- * devices are assigned to each board:
- * board 0 is assigned ttyF0.. to ttyF63,
- * board 1 is assigned ttyF64 to ttyF127,
- * board 2 is assigned ttyF128 to ttyF191,
- * board 3 is assigned ttyF192 to ttyF255.
- *
- * In PCI and EISA bus systems each range is mapped to card in
- * monotonically increasing slot number order, ISA position is as specified
- * here.
-
- * If the irqs are ALL set to 0,0,0,0 all boards operate in
- * polled mode. For interrupt operation ISA boards require that the IRQ be
- * specified, while PCI and EISA boards any nonzero entry
- * will enable interrupts using the BIOS configured irq for the board.
- * An invalid irq entry will default to polled mode for that card and print
- * console warning.
-
- * When the driver is loaded as a module these setting can be overridden on the
- * modprobe command line or on an option line in /etc/modprobe.conf.
- * If the driver is built-in the configuration must be
- * set here for ISA cards and address set to 1 and 2 for PCI and EISA.
- *
- * Here is an example that shows most if not all possibe combinations:
-
- *static ip2config_t ip2config =
- *{
- * {11,1,0,0}, // irqs
- * { // Addresses
- * 0x0308, // Board 0, ttyF0 - ttyF63// ISA card at io=0x308, irq=11
- * 0x0001, // Board 1, ttyF64 - ttyF127//PCI card configured by BIOS
- * 0x0000, // Board 2, ttyF128 - ttyF191// Slot skipped
- * 0x0002 // Board 3, ttyF192 - ttyF255//EISA card configured by BIOS
- * // but polled not irq driven
- * }
- *};
- */
-
- /* this structure is zeroed out because the suggested method is to configure
- * the driver as a module, set up the parameters with an options line in
- * /etc/modprobe.conf and load with modprobe or kmod, the kernel
- * module loader
- */
-
- /* This structure is NOW always initialized when the driver is initialized.
- * Compiled in defaults MUST be added to the io and irq arrays in
- * ip2.c. Those values are configurable from insmod parameters in the
- * case of modules or from command line parameters (ip2=io,irq) when
- * compiled in.
- */
-
-static ip2config_t ip2config =
-{
- {0,0,0,0}, // irqs
- { // Addresses
- /* Do NOT set compile time defaults HERE! Use the arrays in
- ip2.c! These WILL be overwritten! =mhw= */
- 0x0000, // Board 0, ttyF0 - ttyF63
- 0x0000, // Board 1, ttyF64 - ttyF127
- 0x0000, // Board 2, ttyF128 - ttyF191
- 0x0000 // Board 3, ttyF192 - ttyF255
- }
-};
-
-#endif
diff --git a/drivers/char/ip2/ip2ioctl.h b/drivers/char/ip2/ip2ioctl.h
deleted file mode 100644
index aa0a9da..0000000
--- a/drivers/char/ip2/ip2ioctl.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Driver constants for configuration and tuning
-*
-* NOTES:
-*
-*******************************************************************************/
-
-#ifndef IP2IOCTL_H
-#define IP2IOCTL_H
-
-//*************
-//* Constants *
-//*************
-
-// High baud rates (if not defined elsewhere.
-#ifndef B153600
-# define B153600 0010005
-#endif
-#ifndef B307200
-# define B307200 0010006
-#endif
-#ifndef B921600
-# define B921600 0010007
-#endif
-
-#endif
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
deleted file mode 100644
index ea7a8fb..0000000
--- a/drivers/char/ip2/ip2main.c
+++ /dev/null
@@ -1,3234 +0,0 @@
-/*
-*
-* (c) 1999 by Computone Corporation
-*
-********************************************************************************
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Mainline code for the device driver
-*
-*******************************************************************************/
-// ToDo:
-//
-// Fix the immediate DSS_NOW problem.
-// Work over the channel stats return logic in ip2_ipl_ioctl so they
-// make sense for all 256 possible channels and so the user space
-// utilities will compile and work properly.
-//
-// Done:
-//
-// 1.2.14 /\/\|=mhw=|\/\/
-// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
-// Changed the definition of ip2trace to be more consistent with kernel style
-// Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
-//
-// 1.2.13 /\/\|=mhw=|\/\/
-// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
-// to agreed devfs serial device naming convention.
-//
-// 1.2.12 /\/\|=mhw=|\/\/
-// Cleaned up some remove queue cut and paste errors
-//
-// 1.2.11 /\/\|=mhw=|\/\/
-// Clean up potential NULL pointer dereferences
-// Clean up devfs registration
-// Add kernel command line parsing for io and irq
-// Compile defaults for io and irq are now set in ip2.c not ip2.h!
-// Reworked poll_only hack for explicit parameter setting
-// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
-// Merged ip2_loadmain and old_ip2_init
-// Converted all instances of interruptible_sleep_on into queue calls
-// Most of these had no race conditions but better to clean up now
-//
-// 1.2.10 /\/\|=mhw=|\/\/
-// Fixed the bottom half interrupt handler and enabled USE_IQI
-// to split the interrupt handler into a formal top-half / bottom-half
-// Fixed timing window on high speed processors that queued messages to
-// the outbound mail fifo faster than the board could handle.
-//
-// 1.2.9
-// Four box EX was barfing on >128k kmalloc, made structure smaller by
-// reducing output buffer size
-//
-// 1.2.8
-// Device file system support (MHW)
-//
-// 1.2.7
-// Fixed
-// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
-//
-// 1.2.6
-//Fixes DCD problems
-// DCD was not reported when CLOCAL was set on call to TIOCMGET
-//
-//Enhancements:
-// TIOCMGET requests and waits for status return
-// No DSS interrupts enabled except for DCD when needed
-//
-// For internal use only
-//
-//#define IP2DEBUG_INIT
-//#define IP2DEBUG_OPEN
-//#define IP2DEBUG_WRITE
-//#define IP2DEBUG_READ
-//#define IP2DEBUG_IOCTL
-//#define IP2DEBUG_IPL
-
-//#define IP2DEBUG_TRACE
-//#define DEBUG_FIFO
-
-/************/
-/* Includes */
-/************/
-
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/major.h>
-#include <linux/wait.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/termios.h>
-#include <linux/tty_driver.h>
-#include <linux/serial.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-
-#include <linux/cdk.h>
-#include <linux/comstats.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-
-#include "ip2types.h"
-#include "ip2trace.h"
-#include "ip2ioctl.h"
-#include "ip2.h"
-#include "i2ellis.h"
-#include "i2lib.h"
-
-/*****************
- * /proc/ip2mem *
- *****************/
-
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-static DEFINE_MUTEX(ip2_mutex);
-static const struct file_operations ip2mem_proc_fops;
-static const struct file_operations ip2_proc_fops;
-
-/********************/
-/* Type Definitions */
-/********************/
-
-/*************/
-/* Constants */
-/*************/
-
-/* String constants to identify ourselves */
-static const char pcName[] = "Computone IntelliPort Plus multiport driver";
-static const char pcVersion[] = "1.2.14";
-
-/* String constants for port names */
-static const char pcDriver_name[] = "ip2";
-static const char pcIpl[] = "ip2ipl";
-
-/***********************/
-/* Function Prototypes */
-/***********************/
-
-/* Global module entry functions */
-
-/* Private (static) functions */
-static int ip2_open(PTTY, struct file *);
-static void ip2_close(PTTY, struct file *);
-static int ip2_write(PTTY, const unsigned char *, int);
-static int ip2_putchar(PTTY, unsigned char);
-static void ip2_flush_chars(PTTY);
-static int ip2_write_room(PTTY);
-static int ip2_chars_in_buf(PTTY);
-static void ip2_flush_buffer(PTTY);
-static int ip2_ioctl(PTTY, UINT, ULONG);
-static void ip2_set_termios(PTTY, struct ktermios *);
-static void ip2_set_line_discipline(PTTY);
-static void ip2_throttle(PTTY);
-static void ip2_unthrottle(PTTY);
-static void ip2_stop(PTTY);
-static void ip2_start(PTTY);
-static void ip2_hangup(PTTY);
-static int ip2_tiocmget(struct tty_struct *tty);
-static int ip2_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear);
-static int ip2_get_icount(struct tty_struct *tty,
- struct serial_icounter_struct *icount);
-
-static void set_irq(int, int);
-static void ip2_interrupt_bh(struct work_struct *work);
-static irqreturn_t ip2_interrupt(int irq, void *dev_id);
-static void ip2_poll(unsigned long arg);
-static inline void service_all_boards(void);
-static void do_input(struct work_struct *);
-static void do_status(struct work_struct *);
-
-static void ip2_wait_until_sent(PTTY,int);
-
-static void set_params (i2ChanStrPtr, struct ktermios *);
-static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
-static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
-
-static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
-static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
-static long ip2_ipl_ioctl(struct file *, UINT, ULONG);
-static int ip2_ipl_open(struct inode *, struct file *);
-
-static int DumpTraceBuffer(char __user *, int);
-static int DumpFifoBuffer( char __user *, int);
-
-static void ip2_init_board(int, const struct firmware *);
-static unsigned short find_eisa_board(int);
-static int ip2_setup(char *str);
-
-/***************/
-/* Static Data */
-/***************/
-
-static struct tty_driver *ip2_tty_driver;
-
-/* Here, then is a table of board pointers which the interrupt routine should
- * scan through to determine who it must service.
- */
-static unsigned short i2nBoards; // Number of boards here
-
-static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
-
-static i2ChanStrPtr DevTable[IP2_MAX_PORTS];
-//DevTableMem just used to save addresses for kfree
-static void *DevTableMem[IP2_MAX_BOARDS];
-
-/* This is the driver descriptor for the ip2ipl device, which is used to
- * download the loadware to the boards.
- */
-static const struct file_operations ip2_ipl = {
- .owner = THIS_MODULE,
- .read = ip2_ipl_read,
- .write = ip2_ipl_write,
- .unlocked_ioctl = ip2_ipl_ioctl,
- .open = ip2_ipl_open,
- .llseek = noop_llseek,
-};
-
-static unsigned long irq_counter;
-static unsigned long bh_counter;
-
-// Use immediate queue to service interrupts
-#define USE_IQI
-//#define USE_IQ // PCI&2.2 needs work
-
-/* The timer_list entry for our poll routine. If interrupt operation is not
- * selected, the board is serviced periodically to see if anything needs doing.
- */
-#define POLL_TIMEOUT (jiffies + 1)
-static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
-
-#ifdef IP2DEBUG_TRACE
-/* Trace (debug) buffer data */
-#define TRACEMAX 1000
-static unsigned long tracebuf[TRACEMAX];
-static int tracestuff;
-static int tracestrip;
-static int tracewrap;
-#endif
-
-/**********/
-/* Macros */
-/**********/
-
-#ifdef IP2DEBUG_OPEN
-#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] ttyc=%d, modc=%x -> %s\n", \
- tty->name,(pCh->flags), \
- tty->count,/*GET_USE_COUNT(module)*/0,s)
-#else
-#define DBG_CNT(s)
-#endif
-
-/********/
-/* Code */
-/********/
-
-#include "i2ellis.c" /* Extremely low-level interface services */
-#include "i2cmd.c" /* Standard loadware command definitions */
-#include "i2lib.c" /* High level interface services */
-
-/* Configuration area for modprobe */
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-MODULE_LICENSE("GPL");
-
-#define MAX_CMD_STR 50
-
-static int poll_only;
-static char cmd[MAX_CMD_STR];
-
-static int Eisa_irq;
-static int Eisa_slot;
-
-static int iindx;
-static char rirqs[IP2_MAX_BOARDS];
-static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
-
-/* Note: Add compiled in defaults to these arrays, not to the structure
- in ip2.h any longer. That structure WILL get overridden
- by these values, or command line values, or insmod values!!! =mhw=
-*/
-static int io[IP2_MAX_BOARDS];
-static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 };
-
-MODULE_AUTHOR("Doug McNash");
-MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
-module_param_array(irq, int, NULL, 0);
-MODULE_PARM_DESC(irq, "Interrupts for IntelliPort Cards");
-module_param_array(io, int, NULL, 0);
-MODULE_PARM_DESC(io, "I/O ports for IntelliPort Cards");
-module_param(poll_only, bool, 0);
-MODULE_PARM_DESC(poll_only, "Do not use card interrupts");
-module_param_string(ip2, cmd, MAX_CMD_STR, 0);
-MODULE_PARM_DESC(ip2, "Contains module parameter passed with 'ip2='");
-
-/* for sysfs class support */
-static struct class *ip2_class;
-
-/* Some functions to keep track of what irqs we have */
-
-static int __init is_valid_irq(int irq)
-{
- int *i = Valid_Irqs;
-
- while (*i != 0 && *i != irq)
- i++;
-
- return *i;
-}
-
-static void __init mark_requested_irq(char irq)
-{
- rirqs[iindx++] = irq;
-}
-
-static int __exit clear_requested_irq(char irq)
-{
- int i;
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- if (rirqs[i] == irq) {
- rirqs[i] = 0;
- return 1;
- }
- }
- return 0;
-}
-
-static int have_requested_irq(char irq)
-{
- /* array init to zeros so 0 irq will not be requested as a side
- * effect */
- int i;
- for (i = 0; i < IP2_MAX_BOARDS; ++i)
- if (rirqs[i] == irq)
- return 1;
- return 0;
-}
-
-/******************************************************************************/
-/* Function: cleanup_module() */
-/* Parameters: None */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This is a required entry point for an installable module. It has to return */
-/* the device and the driver to a passive state. It should not be necessary */
-/* to reset the board fully, especially as the loadware is downloaded */
-/* externally rather than in the driver. We just want to disable the board */
-/* and clear the loadware to a reset state. To allow this there has to be a */
-/* way to detect whether the board has the loadware running at init time to */
-/* handle subsequent installations of the driver. All memory allocated by the */
-/* driver should be returned since it may be unloaded from memory. */
-/******************************************************************************/
-static void __exit ip2_cleanup_module(void)
-{
- int err;
- int i;
-
- del_timer_sync(&PollTimer);
-
- /* Reset the boards we have. */
- for (i = 0; i < IP2_MAX_BOARDS; i++)
- if (i2BoardPtrTable[i])
- iiReset(i2BoardPtrTable[i]);
-
- /* The following is done at most once, if any boards were installed. */
- for (i = 0; i < IP2_MAX_BOARDS; i++) {
- if (i2BoardPtrTable[i]) {
- iiResetDelay(i2BoardPtrTable[i]);
- /* free io addresses and Tibet */
- release_region(ip2config.addr[i], 8);
- device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
- device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR,
- 4 * i + 1));
- }
- /* Disable and remove interrupt handler. */
- if (ip2config.irq[i] > 0 &&
- have_requested_irq(ip2config.irq[i])) {
- free_irq(ip2config.irq[i], (void *)&pcName);
- clear_requested_irq(ip2config.irq[i]);
- }
- }
- class_destroy(ip2_class);
- err = tty_unregister_driver(ip2_tty_driver);
- if (err)
- printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n",
- err);
- put_tty_driver(ip2_tty_driver);
- unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
- remove_proc_entry("ip2mem", NULL);
-
- /* free memory */
- for (i = 0; i < IP2_MAX_BOARDS; i++) {
- void *pB;
-#ifdef CONFIG_PCI
- if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
- pci_disable_device(ip2config.pci_dev[i]);
- pci_dev_put(ip2config.pci_dev[i]);
- ip2config.pci_dev[i] = NULL;
- }
-#endif
- pB = i2BoardPtrTable[i];
- if (pB != NULL) {
- kfree(pB);
- i2BoardPtrTable[i] = NULL;
- }
- if (DevTableMem[i] != NULL) {
- kfree(DevTableMem[i]);
- DevTableMem[i] = NULL;
- }
- }
-}
-module_exit(ip2_cleanup_module);
-
-static const struct tty_operations ip2_ops = {
- .open = ip2_open,
- .close = ip2_close,
- .write = ip2_write,
- .put_char = ip2_putchar,
- .flush_chars = ip2_flush_chars,
- .write_room = ip2_write_room,
- .chars_in_buffer = ip2_chars_in_buf,
- .flush_buffer = ip2_flush_buffer,
- .ioctl = ip2_ioctl,
- .throttle = ip2_throttle,
- .unthrottle = ip2_unthrottle,
- .set_termios = ip2_set_termios,
- .set_ldisc = ip2_set_line_discipline,
- .stop = ip2_stop,
- .start = ip2_start,
- .hangup = ip2_hangup,
- .tiocmget = ip2_tiocmget,
- .tiocmset = ip2_tiocmset,
- .get_icount = ip2_get_icount,
- .proc_fops = &ip2_proc_fops,
-};
-
-/******************************************************************************/
-/* Function: ip2_loadmain() */
-/* Parameters: irq, io from command line of insmod et. al. */
-/* pointer to fip firmware and firmware size for boards */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/* This was the required entry point for all drivers (now in ip2.c) */
-/* It performs all */
-/* initialisation of the devices and driver structures, and registers itself */
-/* with the relevant kernel modules. */
-/******************************************************************************/
-/* IRQF_DISABLED - if set blocks all interrupts else only this line */
-/* IRQF_SHARED - for shared irq PCI or maybe EISA only */
-/* SA_RANDOM - can be source for cert. random number generators */
-#define IP2_SA_FLAGS 0
-
-
-static const struct firmware *ip2_request_firmware(void)
-{
- struct platform_device *pdev;
- const struct firmware *fw;
-
- pdev = platform_device_register_simple("ip2", 0, NULL, 0);
- if (IS_ERR(pdev)) {
- printk(KERN_ERR "Failed to register platform device for ip2\n");
- return NULL;
- }
- if (request_firmware(&fw, "intelliport2.bin", &pdev->dev)) {
- printk(KERN_ERR "Failed to load firmware 'intelliport2.bin'\n");
- fw = NULL;
- }
- platform_device_unregister(pdev);
- return fw;
-}
-
-/******************************************************************************
- * ip2_setup:
- * str: kernel command line string
- *
- * Can't autoprobe the boards so user must specify configuration on
- * kernel command line. Sane people build it modular but the others
- * come here.
- *
- * Alternating pairs of io,irq for up to 4 boards.
- * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3
- *
- * io=0 => No board
- * io=1 => PCI
- * io=2 => EISA
- * else => ISA I/O address
- *
- * irq=0 or invalid for ISA will revert to polling mode
- *
- * Any value = -1, do not overwrite compiled in value.
- *
- ******************************************************************************/
-static int __init ip2_setup(char *str)
-{
- int j, ints[10]; /* 4 boards, 2 parameters + 2 */
- unsigned int i;
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- for (i = 0, j = 1; i < 4; i++) {
- if (j > ints[0])
- break;
- if (ints[j] >= 0)
- io[i] = ints[j];
- j++;
- if (j > ints[0])
- break;
- if (ints[j] >= 0)
- irq[i] = ints[j];
- j++;
- }
- return 1;
-}
-__setup("ip2=", ip2_setup);
-
-static int __init ip2_loadmain(void)
-{
- int i, j, box;
- int err = 0;
- i2eBordStrPtr pB = NULL;
- int rc = -1;
- const struct firmware *fw = NULL;
- char *str;
-
- str = cmd;
-
- if (poll_only) {
- /* Hard lock the interrupts to zero */
- irq[0] = irq[1] = irq[2] = irq[3] = poll_only = 0;
- }
-
- /* Check module parameter with 'ip2=' has been passed or not */
- if (!poll_only && (!strncmp(str, "ip2=", 4)))
- ip2_setup(str);
-
- ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0);
-
- /* process command line arguments to modprobe or
- insmod i.e. iop & irqp */
- /* irqp and iop should ALWAYS be specified now... But we check
- them individually just to be sure, anyways... */
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- ip2config.addr[i] = io[i];
- if (irq[i] >= 0)
- ip2config.irq[i] = irq[i];
- else
- ip2config.irq[i] = 0;
- /* This is a little bit of a hack. If poll_only=1 on command
- line back in ip2.c OR all IRQs on all specified boards are
- explicitly set to 0, then drop to poll only mode and override
- PCI or EISA interrupts. This superceeds the old hack of
- triggering if all interrupts were zero (like da default).
- Still a hack but less prone to random acts of terrorism.
-
- What we really should do, now that the IRQ default is set
- to -1, is to use 0 as a hard coded, do not probe.
-
- /\/\|=mhw=|\/\/
- */
- poll_only |= irq[i];
- }
- poll_only = !poll_only;
-
- /* Announce our presence */
- printk(KERN_INFO "%s version %s\n", pcName, pcVersion);
-
- ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
- if (!ip2_tty_driver)
- return -ENOMEM;
-
- /* Initialise all the boards we can find (up to the maximum). */
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- switch (ip2config.addr[i]) {
- case 0: /* skip this slot even if card is present */
- break;
- default: /* ISA */
- /* ISA address must be specified */
- if (ip2config.addr[i] < 0x100 ||
- ip2config.addr[i] > 0x3f8) {
- printk(KERN_ERR "IP2: Bad ISA board %d "
- "address %x\n", i,
- ip2config.addr[i]);
- ip2config.addr[i] = 0;
- break;
- }
- ip2config.type[i] = ISA;
-
- /* Check for valid irq argument, set for polling if
- * invalid */
- if (ip2config.irq[i] &&
- !is_valid_irq(ip2config.irq[i])) {
- printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",
- ip2config.irq[i]);
- /* 0 is polling and is valid in that sense */
- ip2config.irq[i] = 0;
- }
- break;
- case PCI:
-#ifdef CONFIG_PCI
- {
- struct pci_dev *pdev = NULL;
- u32 addr;
- int status;
-
- pdev = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
- PCI_DEVICE_ID_COMPUTONE_IP2EX, pdev);
- if (pdev == NULL) {
- ip2config.addr[i] = 0;
- printk(KERN_ERR "IP2: PCI board %d not "
- "found\n", i);
- break;
- }
-
- if (pci_enable_device(pdev)) {
- dev_err(&pdev->dev, "can't enable device\n");
- goto out;
- }
- ip2config.type[i] = PCI;
- ip2config.pci_dev[i] = pci_dev_get(pdev);
- status = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_1,
- &addr);
- if (addr & 1)
- ip2config.addr[i] = (USHORT)(addr & 0xfffe);
- else
- dev_err(&pdev->dev, "I/O address error\n");
-
- ip2config.irq[i] = pdev->irq;
-out:
- pci_dev_put(pdev);
- }
-#else
- printk(KERN_ERR "IP2: PCI card specified but PCI "
- "support not enabled.\n");
- printk(KERN_ERR "IP2: Recompile kernel with CONFIG_PCI "
- "defined!\n");
-#endif /* CONFIG_PCI */
- break;
- case EISA:
- ip2config.addr[i] = find_eisa_board(Eisa_slot + 1);
- if (ip2config.addr[i] != 0) {
- /* Eisa_irq set as side effect, boo */
- ip2config.type[i] = EISA;
- }
- ip2config.irq[i] = Eisa_irq;
- break;
- } /* switch */
- } /* for */
-
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- if (ip2config.addr[i]) {
- pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
- if (pB) {
- i2BoardPtrTable[i] = pB;
- iiSetAddress(pB, ip2config.addr[i],
- ii2DelayTimer);
- iiReset(pB);
- } else
- printk(KERN_ERR "IP2: board memory allocation "
- "error\n");
- }
- }
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- pB = i2BoardPtrTable[i];
- if (pB != NULL) {
- iiResetDelay(pB);
- break;
- }
- }
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- /* We don't want to request the firmware unless we have at
- least one board */
- if (i2BoardPtrTable[i] != NULL) {
- if (!fw)
- fw = ip2_request_firmware();
- if (!fw)
- break;
- ip2_init_board(i, fw);
- }
- }
- if (fw)
- release_firmware(fw);
-
- ip2trace(ITRC_NO_PORT, ITRC_INIT, 2, 0);
-
- ip2_tty_driver->owner = THIS_MODULE;
- ip2_tty_driver->name = "ttyF";
- ip2_tty_driver->driver_name = pcDriver_name;
- ip2_tty_driver->major = IP2_TTY_MAJOR;
- ip2_tty_driver->minor_start = 0;
- ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- ip2_tty_driver->init_termios = tty_std_termios;
- ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
- ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(ip2_tty_driver, &ip2_ops);
-
- ip2trace(ITRC_NO_PORT, ITRC_INIT, 3, 0);
-
- err = tty_register_driver(ip2_tty_driver);
- if (err) {
- printk(KERN_ERR "IP2: failed to register tty driver\n");
- put_tty_driver(ip2_tty_driver);
- return err; /* leaking resources */
- }
-
- err = register_chrdev(IP2_IPL_MAJOR, pcIpl, &ip2_ipl);
- if (err) {
- printk(KERN_ERR "IP2: failed to register IPL device (%d)\n",
- err);
- } else {
- /* create the sysfs class */
- ip2_class = class_create(THIS_MODULE, "ip2");
- if (IS_ERR(ip2_class)) {
- err = PTR_ERR(ip2_class);
- goto out_chrdev;
- }
- }
- /* Register the read_procmem thing */
- if (!proc_create("ip2mem",0,NULL,&ip2mem_proc_fops)) {
- printk(KERN_ERR "IP2: failed to register read_procmem\n");
- return -EIO; /* leaking resources */
- }
-
- ip2trace(ITRC_NO_PORT, ITRC_INIT, 4, 0);
- /* Register the interrupt handler or poll handler, depending upon the
- * specified interrupt.
- */
-
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- if (ip2config.addr[i] == 0)
- continue;
-
- pB = i2BoardPtrTable[i];
- if (pB != NULL) {
- device_create(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i),
- NULL, "ipl%d", i);
- device_create(ip2_class, NULL,
- MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
- NULL, "stat%d", i);
-
- for (box = 0; box < ABS_MAX_BOXES; box++)
- for (j = 0; j < ABS_BIGGEST_BOX; j++)
- if (pB->i2eChannelMap[box] & (1 << j))
- tty_register_device(
- ip2_tty_driver,
- j + ABS_BIGGEST_BOX *
- (box+i*ABS_MAX_BOXES),
- NULL);
- }
-
- if (poll_only) {
- /* Poll only forces driver to only use polling and
- to ignore the probed PCI or EISA interrupts. */
- ip2config.irq[i] = CIR_POLL;
- }
- if (ip2config.irq[i] == CIR_POLL) {
-retry:
- if (!timer_pending(&PollTimer)) {
- mod_timer(&PollTimer, POLL_TIMEOUT);
- printk(KERN_INFO "IP2: polling\n");
- }
- } else {
- if (have_requested_irq(ip2config.irq[i]))
- continue;
- rc = request_irq(ip2config.irq[i], ip2_interrupt,
- IP2_SA_FLAGS |
- (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
- pcName, i2BoardPtrTable[i]);
- if (rc) {
- printk(KERN_ERR "IP2: request_irq failed: "
- "error %d\n", rc);
- ip2config.irq[i] = CIR_POLL;
- printk(KERN_INFO "IP2: Polling %ld/sec.\n",
- (POLL_TIMEOUT - jiffies));
- goto retry;
- }
- mark_requested_irq(ip2config.irq[i]);
- /* Initialise the interrupt handler bottom half
- * (aka slih). */
- }
- }
-
- for (i = 0; i < IP2_MAX_BOARDS; ++i) {
- if (i2BoardPtrTable[i]) {
- /* set and enable board interrupt */
- set_irq(i, ip2config.irq[i]);
- }
- }
-
- ip2trace(ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0);
-
- return 0;
-
-out_chrdev:
- unregister_chrdev(IP2_IPL_MAJOR, "ip2");
- /* unregister and put tty here */
- return err;
-}
-module_init(ip2_loadmain);
-
-/******************************************************************************/
-/* Function: ip2_init_board() */
-/* Parameters: Index of board in configuration structure */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/* This function initializes the specified board. The loadware is copied to */
-/* the board, the channel structures are initialized, and the board details */
-/* are reported on the console. */
-/******************************************************************************/
-static void
-ip2_init_board(int boardnum, const struct firmware *fw)
-{
- int i;
- int nports = 0, nboxes = 0;
- i2ChanStrPtr pCh;
- i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
-
- if ( !iiInitialize ( pB ) ) {
- printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
- pB->i2eBase, pB->i2eError );
- goto err_initialize;
- }
- printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
- ip2config.addr[boardnum], ip2config.irq[boardnum] );
-
- if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
- printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
- goto err_initialize;
- }
-
- if ( iiDownloadAll ( pB, (loadHdrStrPtr)fw->data, 1, fw->size )
- != II_DOWN_GOOD ) {
- printk ( KERN_ERR "IP2: failed to download loadware\n" );
- goto err_release_region;
- } else {
- printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
- pB->i2ePom.e.porVersion,
- pB->i2ePom.e.porRevision,
- pB->i2ePom.e.porSubRev, pB->i2eLVersion,
- pB->i2eLRevision, pB->i2eLSub );
- }
-
- switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
-
- default:
- printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
- pB->i2ePom.e.porID );
- nports = 0;
- goto err_release_region;
- break;
-
- case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
- printk ( KERN_INFO "IP2: ISA-4\n" );
- nports = 4;
- break;
-
- case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
- printk ( KERN_INFO "IP2: ISA-8 std\n" );
- nports = 8;
- break;
-
- case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
- printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
- nports = 8;
- break;
-
- case POR_ID_FIIEX: /* IntelliPort IIEX */
- {
- int portnum = IP2_PORTS_PER_BOARD * boardnum;
- int box;
-
- for( box = 0; box < ABS_MAX_BOXES; ++box ) {
- if ( pB->i2eChannelMap[box] != 0 ) {
- ++nboxes;
- }
- for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
- if ( pB->i2eChannelMap[box] & 1<< i ) {
- ++nports;
- }
- }
- }
- DevTableMem[boardnum] = pCh =
- kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
- if ( !pCh ) {
- printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
- goto err_release_region;
- }
- if ( !i2InitChannels( pB, nports, pCh ) ) {
- printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
- kfree ( pCh );
- goto err_release_region;
- }
- pB->i2eChannelPtr = &DevTable[portnum];
- pB->i2eChannelCnt = ABS_MOST_PORTS;
-
- for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
- for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
- if ( pB->i2eChannelMap[box] & (1 << i) ) {
- DevTable[portnum + i] = pCh;
- pCh->port_index = portnum + i;
- pCh++;
- }
- }
- }
- printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
- nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
- }
- goto ex_exit;
- }
- DevTableMem[boardnum] = pCh =
- kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
- if ( !pCh ) {
- printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
- goto err_release_region;
- }
- pB->i2eChannelPtr = pCh;
- pB->i2eChannelCnt = nports;
- if ( !i2InitChannels( pB, nports, pCh ) ) {
- printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
- kfree ( pCh );
- goto err_release_region;
- }
- pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
-
- for( i = 0; i < pB->i2eChannelCnt; ++i ) {
- DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
- pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
- pCh++;
- }
-ex_exit:
- INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh);
- return;
-
-err_release_region:
- release_region(ip2config.addr[boardnum], 8);
-err_initialize:
- kfree ( pB );
- i2BoardPtrTable[boardnum] = NULL;
- return;
-}
-
-/******************************************************************************/
-/* Function: find_eisa_board ( int start_slot ) */
-/* Parameters: First slot to check */
-/* Returns: Address of EISA IntelliPort II controller */
-/* */
-/* Description: */
-/* This function searches for an EISA IntelliPort controller, starting */
-/* from the specified slot number. If the motherboard is not identified as an */
-/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
-/* it returns the base address of the controller. */
-/******************************************************************************/
-static unsigned short
-find_eisa_board( int start_slot )
-{
- int i, j;
- unsigned int idm = 0;
- unsigned int idp = 0;
- unsigned int base = 0;
- unsigned int value;
- int setup_address;
- int setup_irq;
- int ismine = 0;
-
- /*
- * First a check for an EISA motherboard, which we do by comparing the
- * EISA ID registers for the system board and the first couple of slots.
- * No slot ID should match the system board ID, but on an ISA or PCI
- * machine the odds are that an empty bus will return similar values for
- * each slot.
- */
- i = 0x0c80;
- value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
- for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
- j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
- if ( value == j )
- return 0;
- }
-
- /*
- * OK, so we are inclined to believe that this is an EISA machine. Find
- * an IntelliPort controller.
- */
- for( i = start_slot; i < 16; i++ ) {
- base = i << 12;
- idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
- idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
- ismine = 0;
- if ( idm == 0x0e8e ) {
- if ( idp == 0x0281 || idp == 0x0218 ) {
- ismine = 1;
- } else if ( idp == 0x0282 || idp == 0x0283 ) {
- ismine = 3; /* Can do edge-trigger */
- }
- if ( ismine ) {
- Eisa_slot = i;
- break;
- }
- }
- }
- if ( !ismine )
- return 0;
-
- /* It's some sort of EISA card, but at what address is it configured? */
-
- setup_address = base + 0xc88;
- value = inb(base + 0xc86);
- setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
-
- if ( (ismine & 2) && !(value & 0x10) ) {
- ismine = 1; /* Could be edging, but not */
- }
-
- if ( Eisa_irq == 0 ) {
- Eisa_irq = setup_irq;
- } else if ( Eisa_irq != setup_irq ) {
- printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
- }
-
-#ifdef IP2DEBUG_INIT
-printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
- base >> 12, idm, idp, setup_address);
- if ( Eisa_irq ) {
- printk(KERN_DEBUG ", Interrupt %d %s\n",
- setup_irq, (ismine & 2) ? "(edge)" : "(level)");
- } else {
- printk(KERN_DEBUG ", (polled)\n");
- }
-#endif
- return setup_address;
-}
-
-/******************************************************************************/
-/* Function: set_irq() */
-/* Parameters: index to board in board table */
-/* IRQ to use */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/******************************************************************************/
-static void
-set_irq( int boardnum, int boardIrq )
-{
- unsigned char tempCommand[16];
- i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
- unsigned long flags;
-
- /*
- * Notify the boards they may generate interrupts. This is done by
- * sending an in-line command to channel 0 on each board. This is why
- * the channels have to be defined already. For each board, if the
- * interrupt has never been defined, we must do so NOW, directly, since
- * board will not send flow control or even give an interrupt until this
- * is done. If polling we must send 0 as the interrupt parameter.
- */
-
- // We will get an interrupt here at the end of this function
-
- iiDisableMailIrq(pB);
-
- /* We build up the entire packet header. */
- CHANNEL_OF(tempCommand) = 0;
- PTYPE_OF(tempCommand) = PTYPE_INLINE;
- CMD_COUNT_OF(tempCommand) = 2;
- (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
- (CMD_OF(tempCommand))[1] = boardIrq;
- /*
- * Write to FIFO; don't bother to adjust fifo capacity for this, since
- * board will respond almost immediately after SendMail hit.
- */
- write_lock_irqsave(&pB->write_fifo_spinlock, flags);
- iiWriteBuf(pB, tempCommand, 4);
- write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
- pB->i2eUsingIrq = boardIrq;
- pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
-
- /* Need to update number of boards before you enable mailbox int */
- ++i2nBoards;
-
- CHANNEL_OF(tempCommand) = 0;
- PTYPE_OF(tempCommand) = PTYPE_BYPASS;
- CMD_COUNT_OF(tempCommand) = 6;
- (CMD_OF(tempCommand))[0] = 88; // SILO
- (CMD_OF(tempCommand))[1] = 64; // chars
- (CMD_OF(tempCommand))[2] = 32; // ms
-
- (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK
- (CMD_OF(tempCommand))[4] = 64; // chars
-
- (CMD_OF(tempCommand))[5] = 87; // HW_TEST
- write_lock_irqsave(&pB->write_fifo_spinlock, flags);
- iiWriteBuf(pB, tempCommand, 8);
- write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-
- CHANNEL_OF(tempCommand) = 0;
- PTYPE_OF(tempCommand) = PTYPE_BYPASS;
- CMD_COUNT_OF(tempCommand) = 1;
- (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */
- iiWriteBuf(pB, tempCommand, 3);
-
-#ifdef XXX
- // enable heartbeat for test porpoises
- CHANNEL_OF(tempCommand) = 0;
- PTYPE_OF(tempCommand) = PTYPE_BYPASS;
- CMD_COUNT_OF(tempCommand) = 2;
- (CMD_OF(tempCommand))[0] = 44; /* get ping */
- (CMD_OF(tempCommand))[1] = 200; /* 200 ms */
- write_lock_irqsave(&pB->write_fifo_spinlock, flags);
- iiWriteBuf(pB, tempCommand, 4);
- write_unlock_irqrestore(&pB->write_fifo_spinlock, flags);
-#endif
-
- iiEnableMailIrq(pB);
- iiSendPendingMail(pB);
-}
-
-/******************************************************************************/
-/* Interrupt Handler Section */
-/******************************************************************************/
-
-static inline void
-service_all_boards(void)
-{
- int i;
- i2eBordStrPtr pB;
-
- /* Service every board on the list */
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- pB = i2BoardPtrTable[i];
- if ( pB ) {
- i2ServiceBoard( pB );
- }
- }
-}
-
-
-/******************************************************************************/
-/* Function: ip2_interrupt_bh(work) */
-/* Parameters: work - pointer to the board structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* Service the board in a bottom half interrupt handler and then */
-/* reenable the board's interrupts if it has an IRQ number */
-/* */
-/******************************************************************************/
-static void
-ip2_interrupt_bh(struct work_struct *work)
-{
- i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt);
-// pB better well be set or we have a problem! We can only get
-// here from the IMMEDIATE queue. Here, we process the boards.
-// Checking pB doesn't cost much and it saves us from the sanity checkers.
-
- bh_counter++;
-
- if ( pB ) {
- i2ServiceBoard( pB );
- if( pB->i2eUsingIrq ) {
-// Re-enable his interrupts
- iiEnableMailIrq(pB);
- }
- }
-}
-
-
-/******************************************************************************/
-/* Function: ip2_interrupt(int irq, void *dev_id) */
-/* Parameters: irq - interrupt number */
-/* pointer to optional device ID structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* Our task here is simply to identify each board which needs servicing. */
-/* If we are queuing then, queue it to be serviced, and disable its irq */
-/* mask otherwise process the board directly. */
-/* */
-/* We could queue by IRQ but that just complicates things on both ends */
-/* with very little gain in performance (how many instructions does */
-/* it take to iterate on the immediate queue). */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_irq_work(i2eBordStrPtr pB)
-{
-#ifdef USE_IQI
- if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
-// Disable his interrupt (will be enabled when serviced)
-// This is mostly to protect from reentrancy.
- iiDisableMailIrq(pB);
-
-// Park the board on the immediate queue for processing.
- schedule_work(&pB->tqueue_interrupt);
-
-// Make sure the immediate queue is flagged to fire.
- }
-#else
-
-// We are using immediate servicing here. This sucks and can
-// cause all sorts of havoc with ppp and others. The failsafe
-// check on iiSendPendingMail could also throw a hairball.
-
- i2ServiceBoard( pB );
-
-#endif /* USE_IQI */
-}
-
-static void
-ip2_polled_interrupt(void)
-{
- int i;
- i2eBordStrPtr pB;
-
- ip2trace(ITRC_NO_PORT, ITRC_INTR, 99, 1, 0);
-
- /* Service just the boards on the list using this irq */
- for( i = 0; i < i2nBoards; ++i ) {
- pB = i2BoardPtrTable[i];
-
-// Only process those boards which match our IRQ.
-// IRQ = 0 for polled boards, we won't poll "IRQ" boards
-
- if (pB && pB->i2eUsingIrq == 0)
- ip2_irq_work(pB);
- }
-
- ++irq_counter;
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
-}
-
-static irqreturn_t
-ip2_interrupt(int irq, void *dev_id)
-{
- i2eBordStrPtr pB = dev_id;
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, pB->i2eUsingIrq );
-
- ip2_irq_work(pB);
-
- ++irq_counter;
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
- return IRQ_HANDLED;
-}
-
-/******************************************************************************/
-/* Function: ip2_poll(unsigned long arg) */
-/* Parameters: ? */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This function calls the library routine i2ServiceBoard for each board in */
-/* the board table. This is used instead of the interrupt routine when polled */
-/* mode is specified. */
-/******************************************************************************/
-static void
-ip2_poll(unsigned long arg)
-{
- ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
-
- // Just polled boards, IRQ = 0 will hit all non-interrupt boards.
- // It will NOT poll boards handled by hard interrupts.
- // The issue of queued BH interrupts is handled in ip2_interrupt().
- ip2_polled_interrupt();
-
- mod_timer(&PollTimer, POLL_TIMEOUT);
-
- ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
-}
-
-static void do_input(struct work_struct *work)
-{
- i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input);
- unsigned long flags;
-
- ip2trace(CHANN, ITRC_INPUT, 21, 0 );
-
- // Data input
- if ( pCh->pTTY != NULL ) {
- read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
- if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
- read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- i2Input( pCh );
- } else
- read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
- } else {
- ip2trace(CHANN, ITRC_INPUT, 22, 0 );
-
- i2InputFlush( pCh );
- }
-}
-
-// code duplicated from n_tty (ldisc)
-static inline void isig(int sig, struct tty_struct *tty, int flush)
-{
- /* FIXME: This is completely bogus */
- if (tty->pgrp)
- kill_pgrp(tty->pgrp, sig, 1);
- if (flush || !L_NOFLSH(tty)) {
- if ( tty->ldisc->ops->flush_buffer )
- tty->ldisc->ops->flush_buffer(tty);
- i2InputFlush( tty->driver_data );
- }
-}
-
-static void do_status(struct work_struct *work)
-{
- i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status);
- int status;
-
- status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
-
- ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
-
- if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
- if ( (status & I2_BRK) ) {
- // code duplicated from n_tty (ldisc)
- if (I_IGNBRK(pCh->pTTY))
- goto skip_this;
- if (I_BRKINT(pCh->pTTY)) {
- isig(SIGINT, pCh->pTTY, 1);
- goto skip_this;
- }
- wake_up_interruptible(&pCh->pTTY->read_wait);
- }
-#ifdef NEVER_HAPPENS_AS_SETUP_XXX
- // and can't work because we don't know the_char
- // as the_char is reported on a separate path
- // The intelligent board does this stuff as setup
- {
- char brkf = TTY_NORMAL;
- unsigned char brkc = '\0';
- unsigned char tmp;
- if ( (status & I2_BRK) ) {
- brkf = TTY_BREAK;
- brkc = '\0';
- }
- else if (status & I2_PAR) {
- brkf = TTY_PARITY;
- brkc = the_char;
- } else if (status & I2_FRA) {
- brkf = TTY_FRAME;
- brkc = the_char;
- } else if (status & I2_OVR) {
- brkf = TTY_OVERRUN;
- brkc = the_char;
- }
- tmp = pCh->pTTY->real_raw;
- pCh->pTTY->real_raw = 0;
- pCh->pTTY->ldisc->ops.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
- pCh->pTTY->real_raw = tmp;
- }
-#endif /* NEVER_HAPPENS_AS_SETUP_XXX */
- }
-skip_this:
-
- if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
- wake_up_interruptible(&pCh->delta_msr_wait);
-
- if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
- if ( status & I2_DCD ) {
- if ( pCh->wopen ) {
- wake_up_interruptible ( &pCh->open_wait );
- }
- } else {
- if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
- tty_hangup( pCh->pTTY );
- }
- }
- }
- }
-
- ip2trace (CHANN, ITRC_STATUS, 26, 0 );
-}
-
-/******************************************************************************/
-/* Device Open/Close/Ioctl Entry Point Section */
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function: open_sanity_check() */
-/* Parameters: Pointer to tty structure */
-/* Pointer to file structure */
-/* Returns: Success or failure */
-/* */
-/* Description: */
-/* Verifies the structure magic numbers and cross links. */
-/******************************************************************************/
-#ifdef IP2DEBUG_OPEN
-static void
-open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
-{
- if ( pBrd->i2eValid != I2E_MAGIC ) {
- printk(KERN_ERR "IP2: invalid board structure\n" );
- } else if ( pBrd != pCh->pMyBord ) {
- printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
- pCh->pMyBord );
- } else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
- printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
- } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
- } else {
- printk(KERN_INFO "IP2: all pointers check out!\n" );
- }
-}
-#endif
-
-
-/******************************************************************************/
-/* Function: ip2_open() */
-/* Parameters: Pointer to tty structure */
-/* Pointer to file structure */
-/* Returns: Success or failure */
-/* */
-/* Description: (MANDATORY) */
-/* A successful device open has to run a gauntlet of checks before it */
-/* completes. After some sanity checking and pointer setup, the function */
-/* blocks until all conditions are satisfied. It then initialises the port to */
-/* the default characteristics and returns. */
-/******************************************************************************/
-static int
-ip2_open( PTTY tty, struct file *pFile )
-{
- wait_queue_t wait;
- int rc = 0;
- int do_clocal = 0;
- i2ChanStrPtr pCh = DevTable[tty->index];
-
- ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
-
- if ( pCh == NULL ) {
- return -ENODEV;
- }
- /* Setup pointer links in device and tty structures */
- pCh->pTTY = tty;
- tty->driver_data = pCh;
-
-#ifdef IP2DEBUG_OPEN
- printk(KERN_DEBUG \
- "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
- tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
- open_sanity_check ( pCh, pCh->pMyBord );
-#endif
-
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
- pCh->dataSetOut |= (I2_DTR | I2_RTS);
- serviceOutgoingFifo( pCh->pMyBord );
-
- /* Block here until the port is ready (per serial and istallion) */
- /*
- * 1. If the port is in the middle of closing wait for the completion
- * and then return the appropriate error.
- */
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&pCh->close_wait, &wait);
- set_current_state( TASK_INTERRUPTIBLE );
-
- if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
- if ( pCh->flags & ASYNC_CLOSING ) {
- tty_unlock();
- schedule();
- tty_lock();
- }
- if ( tty_hung_up_p(pFile) ) {
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->close_wait, &wait);
- return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
- }
- }
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->close_wait, &wait);
-
- /*
- * 3. Handle a non-blocking open of a normal port.
- */
- if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
- pCh->flags |= ASYNC_NORMAL_ACTIVE;
- goto noblock;
- }
- /*
- * 4. Now loop waiting for the port to be free and carrier present
- * (if required).
- */
- if ( tty->termios->c_cflag & CLOCAL )
- do_clocal = 1;
-
-#ifdef IP2DEBUG_OPEN
- printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
-#endif
-
- ++pCh->wopen;
-
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&pCh->open_wait, &wait);
-
- for(;;) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
- pCh->dataSetOut |= (I2_DTR | I2_RTS);
- set_current_state( TASK_INTERRUPTIBLE );
- serviceOutgoingFifo( pCh->pMyBord );
- if ( tty_hung_up_p(pFile) ) {
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->open_wait, &wait);
- return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
- }
- if (!(pCh->flags & ASYNC_CLOSING) &&
- (do_clocal || (pCh->dataSetIn & I2_DCD) )) {
- rc = 0;
- break;
- }
-
-#ifdef IP2DEBUG_OPEN
- printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
- (pCh->flags & ASYNC_CLOSING)?"True":"False");
- printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
-#endif
- ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
- (pCh->flags & ASYNC_CLOSING) );
- /* check for signal */
- if (signal_pending(current)) {
- rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
- break;
- }
- tty_unlock();
- schedule();
- tty_lock();
- }
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->open_wait, &wait);
-
- --pCh->wopen; //why count?
-
- ip2trace (CHANN, ITRC_OPEN, 4, 0 );
-
- if (rc != 0 ) {
- return rc;
- }
- pCh->flags |= ASYNC_NORMAL_ACTIVE;
-
-noblock:
-
- /* first open - Assign termios structure to port */
- if ( tty->count == 1 ) {
- i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
- /* Now we must send the termios settings to the loadware */
- set_params( pCh, NULL );
- }
-
- /*
- * Now set any i2lib options. These may go away if the i2lib code ends
- * up rolled into the mainline.
- */
- pCh->channelOptions |= CO_NBLOCK_WRITE;
-
-#ifdef IP2DEBUG_OPEN
- printk (KERN_DEBUG "IP2: open completed\n" );
-#endif
- serviceOutgoingFifo( pCh->pMyBord );
-
- ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
-
- return 0;
-}
-
-/******************************************************************************/
-/* Function: ip2_close() */
-/* Parameters: Pointer to tty structure */
-/* Pointer to file structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_close( PTTY tty, struct file *pFile )
-{
- i2ChanStrPtr pCh = tty->driver_data;
-
- if ( !pCh ) {
- return;
- }
-
- ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
-
-#ifdef IP2DEBUG_OPEN
- printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
-#endif
-
- if ( tty_hung_up_p ( pFile ) ) {
-
- ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
-
- return;
- }
- if ( tty->count > 1 ) { /* not the last close */
-
- ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
-
- return;
- }
- pCh->flags |= ASYNC_CLOSING; // last close actually
-
- tty->closing = 1;
-
- if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
- /*
- * Before we drop DTR, make sure the transmitter has completely drained.
- * This uses an timeout, after which the close
- * completes.
- */
- ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
- }
- /*
- * At this point we stop accepting input. Here we flush the channel
- * input buffer which will allow the board to send up more data. Any
- * additional input is tossed at interrupt/poll time.
- */
- i2InputFlush( pCh );
-
- /* disable DSS reporting */
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
- CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
- if (tty->termios->c_cflag & HUPCL) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
- pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
- i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
- }
-
- serviceOutgoingFifo ( pCh->pMyBord );
-
- tty_ldisc_flush(tty);
- tty_driver_flush_buffer(tty);
- tty->closing = 0;
-
- pCh->pTTY = NULL;
-
- if (pCh->wopen) {
- if (pCh->ClosingDelay) {
- msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
- }
- wake_up_interruptible(&pCh->open_wait);
- }
-
- pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&pCh->close_wait);
-
-#ifdef IP2DEBUG_OPEN
- DBG_CNT("ip2_close: after wakeups--");
-#endif
-
-
- ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
-
- return;
-}
-
-/******************************************************************************/
-/* Function: ip2_hangup() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_hangup ( PTTY tty )
-{
- i2ChanStrPtr pCh = tty->driver_data;
-
- if( !pCh ) {
- return;
- }
-
- ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
-
- ip2_flush_buffer(tty);
-
- /* disable DSS reporting */
-
- i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
- i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
- if ( (tty->termios->c_cflag & HUPCL) ) {
- i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
- pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
- i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
- }
- i2QueueCommands(PTYPE_INLINE, pCh, 1, 3,
- CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
- serviceOutgoingFifo ( pCh->pMyBord );
-
- wake_up_interruptible ( &pCh->delta_msr_wait );
-
- pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
- pCh->pTTY = NULL;
- wake_up_interruptible ( &pCh->open_wait );
-
- ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/* Device Output Section */
-/******************************************************************************/
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function: ip2_write() */
-/* Parameters: Pointer to tty structure */
-/* Flag denoting data is in user (1) or kernel (0) space */
-/* Pointer to data */
-/* Number of bytes to write */
-/* Returns: Number of bytes actually written */
-/* */
-/* Description: (MANDATORY) */
-/* */
-/* */
-/******************************************************************************/
-static int
-ip2_write( PTTY tty, const unsigned char *pData, int count)
-{
- i2ChanStrPtr pCh = tty->driver_data;
- int bytesSent = 0;
- unsigned long flags;
-
- ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
-
- /* Flush out any buffered data left over from ip2_putchar() calls. */
- ip2_flush_chars( tty );
-
- /* This is the actual move bit. Make sure it does what we need!!!!! */
- write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- bytesSent = i2Output( pCh, pData, count);
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-
- ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
-
- return bytesSent > 0 ? bytesSent : 0;
-}
-
-/******************************************************************************/
-/* Function: ip2_putchar() */
-/* Parameters: Pointer to tty structure */
-/* Character to write */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static int
-ip2_putchar( PTTY tty, unsigned char ch )
-{
- i2ChanStrPtr pCh = tty->driver_data;
- unsigned long flags;
-
-// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
-
- write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
- if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
- ip2_flush_chars( tty );
- } else
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
- return 1;
-
-// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
-}
-
-/******************************************************************************/
-/* Function: ip2_flush_chars() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/******************************************************************************/
-static void
-ip2_flush_chars( PTTY tty )
-{
- int strip;
- i2ChanStrPtr pCh = tty->driver_data;
- unsigned long flags;
-
- write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- if ( pCh->Pbuf_stuff ) {
-
-// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
-
- //
- // We may need to restart i2Output if it does not fullfill this request
- //
- strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
- if ( strip != pCh->Pbuf_stuff ) {
- memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
- }
- pCh->Pbuf_stuff -= strip;
- }
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-}
-
-/******************************************************************************/
-/* Function: ip2_write_room() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Number of bytes that the driver can accept */
-/* */
-/* Description: */
-/* */
-/******************************************************************************/
-static int
-ip2_write_room ( PTTY tty )
-{
- int bytesFree;
- i2ChanStrPtr pCh = tty->driver_data;
- unsigned long flags;
-
- read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
- read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
-
- ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
-
- return ((bytesFree > 0) ? bytesFree : 0);
-}
-
-/******************************************************************************/
-/* Function: ip2_chars_in_buf() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Number of bytes queued for transmission */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static int
-ip2_chars_in_buf ( PTTY tty )
-{
- i2ChanStrPtr pCh = tty->driver_data;
- int rc;
- unsigned long flags;
-
- ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
-
-#ifdef IP2DEBUG_WRITE
- printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
- pCh->Obuf_char_count + pCh->Pbuf_stuff,
- pCh->Obuf_char_count, pCh->Pbuf_stuff );
-#endif
- read_lock_irqsave(&pCh->Obuf_spinlock, flags);
- rc = pCh->Obuf_char_count;
- read_unlock_irqrestore(&pCh->Obuf_spinlock, flags);
- read_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- rc += pCh->Pbuf_stuff;
- read_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
- return rc;
-}
-
-/******************************************************************************/
-/* Function: ip2_flush_buffer() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_flush_buffer( PTTY tty )
-{
- i2ChanStrPtr pCh = tty->driver_data;
- unsigned long flags;
-
- ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
-
-#ifdef IP2DEBUG_WRITE
- printk (KERN_DEBUG "IP2: flush buffer\n" );
-#endif
- write_lock_irqsave(&pCh->Pbuf_spinlock, flags);
- pCh->Pbuf_stuff = 0;
- write_unlock_irqrestore(&pCh->Pbuf_spinlock, flags);
- i2FlushOutput( pCh );
- ip2_owake(tty);
-
- ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
-
-}
-
-/******************************************************************************/
-/* Function: ip2_wait_until_sent() */
-/* Parameters: Pointer to tty structure */
-/* Timeout for wait. */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This function is used in place of the normal tty_wait_until_sent, which */
-/* only waits for the driver buffers to be empty (or rather, those buffers */
-/* reported by chars_in_buffer) which doesn't work for IP2 due to the */
-/* indeterminate number of bytes buffered on the board. */
-/******************************************************************************/
-static void
-ip2_wait_until_sent ( PTTY tty, int timeout )
-{
- int i = jiffies;
- i2ChanStrPtr pCh = tty->driver_data;
-
- tty_wait_until_sent(tty, timeout );
- if ( (i = timeout - (jiffies -i)) > 0)
- i2DrainOutput( pCh, i );
-}
-
-/******************************************************************************/
-/******************************************************************************/
-/* Device Input Section */
-/******************************************************************************/
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function: ip2_throttle() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_throttle ( PTTY tty )
-{
- i2ChanStrPtr pCh = tty->driver_data;
-
-#ifdef IP2DEBUG_READ
- printk (KERN_DEBUG "IP2: throttle\n" );
-#endif
- /*
- * Signal the poll/interrupt handlers not to forward incoming data to
- * the line discipline. This will cause the buffers to fill up in the
- * library and thus cause the library routines to send the flow control
- * stuff.
- */
- pCh->throttled = 1;
-}
-
-/******************************************************************************/
-/* Function: ip2_unthrottle() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_unthrottle ( PTTY tty )
-{
- i2ChanStrPtr pCh = tty->driver_data;
- unsigned long flags;
-
-#ifdef IP2DEBUG_READ
- printk (KERN_DEBUG "IP2: unthrottle\n" );
-#endif
-
- /* Pass incoming data up to the line discipline again. */
- pCh->throttled = 0;
- i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
- serviceOutgoingFifo( pCh->pMyBord );
- read_lock_irqsave(&pCh->Ibuf_spinlock, flags);
- if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
- read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-#ifdef IP2DEBUG_READ
- printk (KERN_DEBUG "i2Input called from unthrottle\n" );
-#endif
- i2Input( pCh );
- } else
- read_unlock_irqrestore(&pCh->Ibuf_spinlock, flags);
-}
-
-static void
-ip2_start ( PTTY tty )
-{
- i2ChanStrPtr pCh = DevTable[tty->index];
-
- i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
-#ifdef IP2DEBUG_WRITE
- printk (KERN_DEBUG "IP2: start tx\n" );
-#endif
-}
-
-static void
-ip2_stop ( PTTY tty )
-{
- i2ChanStrPtr pCh = DevTable[tty->index];
-
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
-#ifdef IP2DEBUG_WRITE
- printk (KERN_DEBUG "IP2: stop tx\n" );
-#endif
-}
-
-/******************************************************************************/
-/* Device Ioctl Section */
-/******************************************************************************/
-
-static int ip2_tiocmget(struct tty_struct *tty)
-{
- i2ChanStrPtr pCh = DevTable[tty->index];
-#ifdef ENABLE_DSSNOW
- wait_queue_t wait;
-#endif
-
- if (pCh == NULL)
- return -ENODEV;
-
-/*
- FIXME - the following code is causing a NULL pointer dereference in
- 2.3.51 in an interrupt handler. It's suppose to prompt the board
- to return the DSS signal status immediately. Why doesn't it do
- the same thing in 2.2.14?
-*/
-
-/* This thing is still busted in the 1.2.12 driver on 2.4.x
- and even hoses the serial console so the oops can be trapped.
- /\/\|=mhw=|\/\/ */
-
-#ifdef ENABLE_DSSNOW
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
-
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&pCh->dss_now_wait, &wait);
- set_current_state( TASK_INTERRUPTIBLE );
-
- serviceOutgoingFifo( pCh->pMyBord );
-
- schedule();
-
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->dss_now_wait, &wait);
-
- if (signal_pending(current)) {
- return -EINTR;
- }
-#endif
- return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
- | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
- | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0)
- | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0)
- | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0)
- | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
-}
-
-static int ip2_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- i2ChanStrPtr pCh = DevTable[tty->index];
-
- if (pCh == NULL)
- return -ENODEV;
-
- if (set & TIOCM_RTS) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
- pCh->dataSetOut |= I2_RTS;
- }
- if (set & TIOCM_DTR) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
- pCh->dataSetOut |= I2_DTR;
- }
-
- if (clear & TIOCM_RTS) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
- pCh->dataSetOut &= ~I2_RTS;
- }
- if (clear & TIOCM_DTR) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
- pCh->dataSetOut &= ~I2_DTR;
- }
- serviceOutgoingFifo( pCh->pMyBord );
- return 0;
-}
-
-/******************************************************************************/
-/* Function: ip2_ioctl() */
-/* Parameters: Pointer to tty structure */
-/* Pointer to file structure */
-/* Command */
-/* Argument */
-/* Returns: Success or failure */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static int
-ip2_ioctl ( PTTY tty, UINT cmd, ULONG arg )
-{
- wait_queue_t wait;
- i2ChanStrPtr pCh = DevTable[tty->index];
- i2eBordStrPtr pB;
- struct async_icount cprev, cnow; /* kernel counter temps */
- int rc = 0;
- unsigned long flags;
- void __user *argp = (void __user *)arg;
-
- if ( pCh == NULL )
- return -ENODEV;
-
- pB = pCh->pMyBord;
-
- ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
-
-#ifdef IP2DEBUG_IOCTL
- printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
-#endif
-
- switch(cmd) {
- case TIOCGSERIAL:
-
- ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
-
- rc = get_serial_info(pCh, argp);
- if (rc)
- return rc;
- break;
-
- case TIOCSSERIAL:
-
- ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
-
- rc = set_serial_info(pCh, argp);
- if (rc)
- return rc;
- break;
-
- case TCXONC:
- rc = tty_check_change(tty);
- if (rc)
- return rc;
- switch (arg) {
- case TCOOFF:
- //return -ENOIOCTLCMD;
- break;
- case TCOON:
- //return -ENOIOCTLCMD;
- break;
- case TCIOFF:
- if (STOP_CHAR(tty) != __DISABLED_CHAR) {
- i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
- CMD_XMIT_NOW(STOP_CHAR(tty)));
- }
- break;
- case TCION:
- if (START_CHAR(tty) != __DISABLED_CHAR) {
- i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
- CMD_XMIT_NOW(START_CHAR(tty)));
- }
- break;
- default:
- return -EINVAL;
- }
- return 0;
-
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- rc = tty_check_change(tty);
-
- ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
-
- if (!rc) {
- ip2_wait_until_sent(tty,0);
- if (!arg) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
- serviceOutgoingFifo( pCh->pMyBord );
- }
- }
- break;
-
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- rc = tty_check_change(tty);
-
- ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
-
- if (!rc) {
- ip2_wait_until_sent(tty,0);
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
- CMD_SEND_BRK(arg ? arg*100 : 250));
- serviceOutgoingFifo ( pCh->pMyBord );
- }
- break;
-
- case TIOCGSOFTCAR:
-
- ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
-
- rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
- if (rc)
- return rc;
- break;
-
- case TIOCSSOFTCAR:
-
- ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
-
- rc = get_user(arg,(unsigned long __user *) argp);
- if (rc)
- return rc;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
- | (arg ? CLOCAL : 0));
-
- break;
-
- /*
- * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
- * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
- * for masking). Caller should use TIOCGICOUNT to see which one it was
- */
- case TIOCMIWAIT:
- write_lock_irqsave(&pB->read_fifo_spinlock, flags);
- cprev = pCh->icount; /* note the counters on entry */
- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
- CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&pCh->delta_msr_wait, &wait);
- set_current_state( TASK_INTERRUPTIBLE );
-
- serviceOutgoingFifo( pCh->pMyBord );
- for(;;) {
- ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
-
- schedule();
-
- ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
-
- /* see if a signal did it */
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- write_lock_irqsave(&pB->read_fifo_spinlock, flags);
- cnow = pCh->icount; /* atomic copy */
- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
- rc = -EIO; /* no change => rc */
- break;
- }
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
- rc = 0;
- break;
- }
- cprev = cnow;
- }
- set_current_state( TASK_RUNNING );
- remove_wait_queue(&pCh->delta_msr_wait, &wait);
-
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3,
- CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
- if ( ! (pCh->flags & ASYNC_CHECK_CD)) {
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
- }
- serviceOutgoingFifo( pCh->pMyBord );
- return rc;
- break;
-
- /*
- * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
- * will be passed to the line discipline for it to handle.
- */
- case TIOCSERCONFIG:
- case TIOCSERGWILD:
- case TIOCSERGETLSR:
- case TIOCSERSWILD:
- case TIOCSERGSTRUCT:
- case TIOCSERGETMULTI:
- case TIOCSERSETMULTI:
-
- default:
- ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
-
- rc = -ENOIOCTLCMD;
- break;
- }
-
- ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
-
- return rc;
-}
-
-static int ip2_get_icount(struct tty_struct *tty,
- struct serial_icounter_struct *icount)
-{
- i2ChanStrPtr pCh = DevTable[tty->index];
- i2eBordStrPtr pB;
- struct async_icount cnow; /* kernel counter temp */
- unsigned long flags;
-
- if ( pCh == NULL )
- return -ENODEV;
-
- pB = pCh->pMyBord;
-
- /*
- * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
- * Return: write counters to the user passed counter struct
- * NB: both 1->0 and 0->1 transitions are counted except for RI where
- * only 0->1 is counted. The controller is quite capable of counting
- * both, but this done to preserve compatibility with the standard
- * serial driver.
- */
-
- write_lock_irqsave(&pB->read_fifo_spinlock, flags);
- cnow = pCh->icount;
- write_unlock_irqrestore(&pB->read_fifo_spinlock, flags);
-
- icount->cts = cnow.cts;
- icount->dsr = cnow.dsr;
- icount->rng = cnow.rng;
- icount->dcd = cnow.dcd;
- icount->rx = cnow.rx;
- icount->tx = cnow.tx;
- icount->frame = cnow.frame;
- icount->overrun = cnow.overrun;
- icount->parity = cnow.parity;
- icount->brk = cnow.brk;
- icount->buf_overrun = cnow.buf_overrun;
- return 0;
-}
-
-/******************************************************************************/
-/* Function: GetSerialInfo() */
-/* Parameters: Pointer to channel structure */
-/* Pointer to old termios structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This is to support the setserial command, and requires processing of the */
-/* standard Linux serial structure. */
-/******************************************************************************/
-static int
-get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
-{
- struct serial_struct tmp;
-
- memset ( &tmp, 0, sizeof(tmp) );
- tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
- if (BID_HAS_654(tmp.type)) {
- tmp.type = PORT_16650;
- } else {
- tmp.type = PORT_CIRRUS;
- }
- tmp.line = pCh->port_index;
- tmp.port = pCh->pMyBord->i2eBase;
- tmp.irq = ip2config.irq[pCh->port_index/64];
- tmp.flags = pCh->flags;
- tmp.baud_base = pCh->BaudBase;
- tmp.close_delay = pCh->ClosingDelay;
- tmp.closing_wait = pCh->ClosingWaitTime;
- tmp.custom_divisor = pCh->BaudDivisor;
- return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
-}
-
-/******************************************************************************/
-/* Function: SetSerialInfo() */
-/* Parameters: Pointer to channel structure */
-/* Pointer to old termios structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This function provides support for setserial, which uses the TIOCSSERIAL */
-/* ioctl. Not all setserial parameters are relevant. If the user attempts to */
-/* change the IRQ, address or type of the port the ioctl fails. */
-/******************************************************************************/
-static int
-set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
-{
- struct serial_struct ns;
- int old_flags, old_baud_divisor;
-
- if (copy_from_user(&ns, new_info, sizeof (ns)))
- return -EFAULT;
-
- /*
- * We don't allow setserial to change IRQ, board address, type or baud
- * base. Also line nunber as such is meaningless but we use it for our
- * array index so it is fixed also.
- */
- if ( (ns.irq != ip2config.irq[pCh->port_index])
- || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase)))
- || (ns.baud_base != pCh->BaudBase)
- || (ns.line != pCh->port_index) ) {
- return -EINVAL;
- }
-
- old_flags = pCh->flags;
- old_baud_divisor = pCh->BaudDivisor;
-
- if ( !capable(CAP_SYS_ADMIN) ) {
- if ( ( ns.close_delay != pCh->ClosingDelay ) ||
- ( (ns.flags & ~ASYNC_USR_MASK) !=
- (pCh->flags & ~ASYNC_USR_MASK) ) ) {
- return -EPERM;
- }
-
- pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
- (ns.flags & ASYNC_USR_MASK);
- pCh->BaudDivisor = ns.custom_divisor;
- } else {
- pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
- (ns.flags & ASYNC_FLAGS);
- pCh->BaudDivisor = ns.custom_divisor;
- pCh->ClosingDelay = ns.close_delay * HZ/100;
- pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
- }
-
- if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
- || (old_baud_divisor != pCh->BaudDivisor) ) {
- // Invalidate speed and reset parameters
- set_params( pCh, NULL );
- }
-
- return 0;
-}
-
-/******************************************************************************/
-/* Function: ip2_set_termios() */
-/* Parameters: Pointer to tty structure */
-/* Pointer to old termios structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_set_termios( PTTY tty, struct ktermios *old_termios )
-{
- i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
-
-#ifdef IP2DEBUG_IOCTL
- printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
-#endif
-
- set_params( pCh, old_termios );
-}
-
-/******************************************************************************/
-/* Function: ip2_set_line_discipline() */
-/* Parameters: Pointer to tty structure */
-/* Returns: Nothing */
-/* */
-/* Description: Does nothing */
-/* */
-/* */
-/******************************************************************************/
-static void
-ip2_set_line_discipline ( PTTY tty )
-{
-#ifdef IP2DEBUG_IOCTL
- printk (KERN_DEBUG "IP2: set line discipline\n" );
-#endif
-
- ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
-
-}
-
-/******************************************************************************/
-/* Function: SetLine Characteristics() */
-/* Parameters: Pointer to channel structure */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* This routine is called to update the channel structure with the new line */
-/* characteristics, and send the appropriate commands to the board when they */
-/* change. */
-/******************************************************************************/
-static void
-set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
-{
- tcflag_t cflag, iflag, lflag;
- char stop_char, start_char;
- struct ktermios dummy;
-
- lflag = pCh->pTTY->termios->c_lflag;
- cflag = pCh->pTTY->termios->c_cflag;
- iflag = pCh->pTTY->termios->c_iflag;
-
- if (o_tios == NULL) {
- dummy.c_lflag = ~lflag;
- dummy.c_cflag = ~cflag;
- dummy.c_iflag = ~iflag;
- o_tios = &dummy;
- }
-
- {
- switch ( cflag & CBAUD ) {
- case B0:
- i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
- pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
- i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
- pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
- goto service_it;
- break;
- case B38400:
- /*
- * This is the speed that is overloaded with all the other high
- * speeds, depending upon the flag settings.
- */
- if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
- pCh->speed = CBR_57600;
- } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
- pCh->speed = CBR_115200;
- } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
- pCh->speed = CBR_C1;
- } else {
- pCh->speed = CBR_38400;
- }
- break;
- case B50: pCh->speed = CBR_50; break;
- case B75: pCh->speed = CBR_75; break;
- case B110: pCh->speed = CBR_110; break;
- case B134: pCh->speed = CBR_134; break;
- case B150: pCh->speed = CBR_150; break;
- case B200: pCh->speed = CBR_200; break;
- case B300: pCh->speed = CBR_300; break;
- case B600: pCh->speed = CBR_600; break;
- case B1200: pCh->speed = CBR_1200; break;
- case B1800: pCh->speed = CBR_1800; break;
- case B2400: pCh->speed = CBR_2400; break;
- case B4800: pCh->speed = CBR_4800; break;
- case B9600: pCh->speed = CBR_9600; break;
- case B19200: pCh->speed = CBR_19200; break;
- case B57600: pCh->speed = CBR_57600; break;
- case B115200: pCh->speed = CBR_115200; break;
- case B153600: pCh->speed = CBR_153600; break;
- case B230400: pCh->speed = CBR_230400; break;
- case B307200: pCh->speed = CBR_307200; break;
- case B460800: pCh->speed = CBR_460800; break;
- case B921600: pCh->speed = CBR_921600; break;
- default: pCh->speed = CBR_9600; break;
- }
- if ( pCh->speed == CBR_C1 ) {
- // Process the custom speed parameters.
- int bps = pCh->BaudBase / pCh->BaudDivisor;
- if ( bps == 921600 ) {
- pCh->speed = CBR_921600;
- } else {
- bps = bps/10;
- i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
- }
- }
- i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
-
- i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
- pCh->dataSetOut |= (I2_DTR | I2_RTS);
- }
- if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag))
- {
- i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
- CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
- }
- if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag))
- {
- i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
- CMD_SETPAR(
- (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
- )
- );
- }
- /* byte size and parity */
- if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag))
- {
- int datasize;
- switch ( cflag & CSIZE ) {
- case CS5: datasize = CSZ_5; break;
- case CS6: datasize = CSZ_6; break;
- case CS7: datasize = CSZ_7; break;
- case CS8: datasize = CSZ_8; break;
- default: datasize = CSZ_5; break; /* as per serial.c */
- }
- i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
- }
- /* Process CTS flow control flag setting */
- if ( (cflag & CRTSCTS) ) {
- i2QueueCommands(PTYPE_INLINE, pCh, 100,
- 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
- } else {
- i2QueueCommands(PTYPE_INLINE, pCh, 100,
- 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
- }
- //
- // Process XON/XOFF flow control flags settings
- //
- stop_char = STOP_CHAR(pCh->pTTY);
- start_char = START_CHAR(pCh->pTTY);
-
- //////////// can't be \000
- if (stop_char == __DISABLED_CHAR )
- {
- stop_char = ~__DISABLED_CHAR;
- }
- if (start_char == __DISABLED_CHAR )
- {
- start_char = ~__DISABLED_CHAR;
- }
- /////////////////////////////////
-
- if ( o_tios->c_cc[VSTART] != start_char )
- {
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
- }
- if ( o_tios->c_cc[VSTOP] != stop_char )
- {
- i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
- }
- if (stop_char == __DISABLED_CHAR )
- {
- stop_char = ~__DISABLED_CHAR; //TEST123
- goto no_xoff;
- }
- if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF)))
- {
- if ( iflag & IXOFF ) { // Enable XOFF output flow control
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
- } else { // Disable XOFF output flow control
-no_xoff:
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
- }
- }
- if (start_char == __DISABLED_CHAR )
- {
- goto no_xon;
- }
- if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY)))
- {
- if ( iflag & IXON ) {
- if ( iflag & IXANY ) { // Enable XON/XANY output flow control
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
- } else { // Enable XON output flow control
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
- }
- } else { // Disable XON output flow control
-no_xon:
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
- }
- }
- if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) )
- {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
- CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
- }
- if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) )
- {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
- CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
- }
-
- if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR))
- ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) )
- {
- char brkrpt = 0;
- char parrpt = 0;
-
- if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
- /* Ignore breaks altogether */
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
- } else {
- if ( iflag & BRKINT ) {
- if ( iflag & PARMRK ) {
- brkrpt = 0x0a; // exception an inline triple
- } else {
- brkrpt = 0x1a; // exception and NULL
- }
- brkrpt |= 0x04; // flush input
- } else {
- if ( iflag & PARMRK ) {
- brkrpt = 0x0b; //POSIX triple \0377 \0 \0
- } else {
- brkrpt = 0x01; // Null only
- }
- }
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
- }
-
- if (iflag & IGNPAR) {
- parrpt = 0x20;
- /* would be 2 for not cirrus bug */
- /* would be 0x20 cept for cirrus bug */
- } else {
- if ( iflag & PARMRK ) {
- /*
- * Replace error characters with 3-byte sequence (\0377,\0,char)
- */
- parrpt = 0x04 ;
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
- } else {
- parrpt = 0x03;
- }
- }
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
- }
- if (cflag & CLOCAL) {
- // Status reporting fails for DCD if this is off
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
- pCh->flags &= ~ASYNC_CHECK_CD;
- } else {
- i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
- pCh->flags |= ASYNC_CHECK_CD;
- }
-
-service_it:
- i2DrainOutput( pCh, 100 );
-}
-
-/******************************************************************************/
-/* IPL Device Section */
-/******************************************************************************/
-
-/******************************************************************************/
-/* Function: ip2_ipl_read() */
-/* Parameters: Pointer to device inode */
-/* Pointer to file structure */
-/* Pointer to data */
-/* Number of bytes to read */
-/* Returns: Success or failure */
-/* */
-/* Description: Ugly */
-/* */
-/* */
-/******************************************************************************/
-
-static
-ssize_t
-ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
-{
- unsigned int minor = iminor(pFile->f_path.dentry->d_inode);
- int rc = 0;
-
-#ifdef IP2DEBUG_IPL
- printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
-#endif
-
- switch( minor ) {
- case 0: // IPL device
- rc = -EINVAL;
- break;
- case 1: // Status dump
- rc = -EINVAL;
- break;
- case 2: // Ping device
- rc = -EINVAL;
- break;
- case 3: // Trace device
- rc = DumpTraceBuffer ( pData, count );
- break;
- case 4: // Trace device
- rc = DumpFifoBuffer ( pData, count );
- break;
- default:
- rc = -ENODEV;
- break;
- }
- return rc;
-}
-
-static int
-DumpFifoBuffer ( char __user *pData, int count )
-{
-#ifdef DEBUG_FIFO
- int rc;
- rc = copy_to_user(pData, DBGBuf, count);
-
- printk(KERN_DEBUG "Last index %d\n", I );
-
- return count;
-#endif /* DEBUG_FIFO */
- return 0;
-}
-
-static int
-DumpTraceBuffer ( char __user *pData, int count )
-{
-#ifdef IP2DEBUG_TRACE
- int rc;
- int dumpcount;
- int chunk;
- int *pIndex = (int __user *)pData;
-
- if ( count < (sizeof(int) * 6) ) {
- return -EIO;
- }
- rc = put_user(tracewrap, pIndex );
- rc = put_user(TRACEMAX, ++pIndex );
- rc = put_user(tracestrip, ++pIndex );
- rc = put_user(tracestuff, ++pIndex );
- pData += sizeof(int) * 6;
- count -= sizeof(int) * 6;
-
- dumpcount = tracestuff - tracestrip;
- if ( dumpcount < 0 ) {
- dumpcount += TRACEMAX;
- }
- if ( dumpcount > count ) {
- dumpcount = count;
- }
- chunk = TRACEMAX - tracestrip;
- if ( dumpcount > chunk ) {
- rc = copy_to_user(pData, &tracebuf[tracestrip],
- chunk * sizeof(tracebuf[0]) );
- pData += chunk * sizeof(tracebuf[0]);
- tracestrip = 0;
- chunk = dumpcount - chunk;
- } else {
- chunk = dumpcount;
- }
- rc = copy_to_user(pData, &tracebuf[tracestrip],
- chunk * sizeof(tracebuf[0]) );
- tracestrip += chunk;
- tracewrap = 0;
-
- rc = put_user(tracestrip, ++pIndex );
- rc = put_user(tracestuff, ++pIndex );
-
- return dumpcount;
-#else
- return 0;
-#endif
-}
-
-/******************************************************************************/
-/* Function: ip2_ipl_write() */
-/* Parameters: */
-/* Pointer to file structure */
-/* Pointer to data */
-/* Number of bytes to write */
-/* Returns: Success or failure */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static ssize_t
-ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
-{
-#ifdef IP2DEBUG_IPL
- printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
-#endif
- return 0;
-}
-
-/******************************************************************************/
-/* Function: ip2_ipl_ioctl() */
-/* Parameters: Pointer to device inode */
-/* Pointer to file structure */
-/* Command */
-/* Argument */
-/* Returns: Success or failure */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static long
-ip2_ipl_ioctl (struct file *pFile, UINT cmd, ULONG arg )
-{
- unsigned int iplminor = iminor(pFile->f_path.dentry->d_inode);
- int rc = 0;
- void __user *argp = (void __user *)arg;
- ULONG __user *pIndex = argp;
- i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
- i2ChanStrPtr pCh;
-
-#ifdef IP2DEBUG_IPL
- printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
-#endif
-
- mutex_lock(&ip2_mutex);
-
- switch ( iplminor ) {
- case 0: // IPL device
- rc = -EINVAL;
- break;
- case 1: // Status dump
- case 5:
- case 9:
- case 13:
- switch ( cmd ) {
- case 64: /* Driver - ip2stat */
- rc = put_user(-1, pIndex++ );
- rc = put_user(irq_counter, pIndex++ );
- rc = put_user(bh_counter, pIndex++ );
- break;
-
- case 65: /* Board - ip2stat */
- if ( pB ) {
- rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
- rc = put_user(inb(pB->i2eStatus),
- (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
- } else {
- rc = -ENODEV;
- }
- break;
-
- default:
- if (cmd < IP2_MAX_PORTS) {
- pCh = DevTable[cmd];
- if ( pCh )
- {
- rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
- if (rc)
- rc = -EFAULT;
- } else {
- rc = -ENODEV;
- }
- } else {
- rc = -EINVAL;
- }
- }
- break;
-
- case 2: // Ping device
- rc = -EINVAL;
- break;
- case 3: // Trace device
- /*
- * akpm: This used to write a whole bunch of function addresses
- * to userspace, which generated lots of put_user() warnings.
- * I killed it all. Just return "success" and don't do
- * anything.
- */
- if (cmd == 1)
- rc = 0;
- else
- rc = -EINVAL;
- break;
-
- default:
- rc = -ENODEV;
- break;
- }
- mutex_unlock(&ip2_mutex);
- return rc;
-}
-
-/******************************************************************************/
-/* Function: ip2_ipl_open() */
-/* Parameters: Pointer to device inode */
-/* Pointer to file structure */
-/* Returns: Success or failure */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-static int
-ip2_ipl_open( struct inode *pInode, struct file *pFile )
-{
-
-#ifdef IP2DEBUG_IPL
- printk (KERN_DEBUG "IP2IPL: open\n" );
-#endif
- return 0;
-}
-
-static int
-proc_ip2mem_show(struct seq_file *m, void *v)
-{
- i2eBordStrPtr pB;
- i2ChanStrPtr pCh;
- PTTY tty;
- int i;
-
-#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
-#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
-#define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
-
- seq_printf(m,"\n");
-
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- pB = i2BoardPtrTable[i];
- if ( pB ) {
- seq_printf(m,"board %d:\n",i);
- seq_printf(m,"\tFifo rem: %d mty: %x outM %x\n",
- pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
- }
- }
-
- seq_printf(m,"#: tty flags, port flags, cflags, iflags\n");
- for (i=0; i < IP2_MAX_PORTS; i++) {
- pCh = DevTable[i];
- if (pCh) {
- tty = pCh->pTTY;
- if (tty && tty->count) {
- seq_printf(m,FMTLINE,i,(int)tty->flags,pCh->flags,
- tty->termios->c_cflag,tty->termios->c_iflag);
-
- seq_printf(m,FMTLIN2,
- pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
- seq_printf(m,FMTLIN3,pCh->infl.asof,pCh->infl.room);
- }
- }
- }
- return 0;
-}
-
-static int proc_ip2mem_open(struct inode *inode, struct file *file)
-{
- return single_open(file, proc_ip2mem_show, NULL);
-}
-
-static const struct file_operations ip2mem_proc_fops = {
- .owner = THIS_MODULE,
- .open = proc_ip2mem_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/*
- * This is the handler for /proc/tty/driver/ip2
- *
- * This stretch of code has been largely plagerized from at least three
- * different sources including ip2mkdev.c and a couple of other drivers.
- * The bugs are all mine. :-) =mhw=
- */
-static int ip2_proc_show(struct seq_file *m, void *v)
-{
- int i, j, box;
- int boxes = 0;
- int ports = 0;
- int tports = 0;
- i2eBordStrPtr pB;
- char *sep;
-
- seq_printf(m, "ip2info: 1.0 driver: %s\n", pcVersion);
- seq_printf(m, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
- IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
- IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
-
- for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
- /* This need to be reset for a board by board count... */
- boxes = 0;
- pB = i2BoardPtrTable[i];
- if( pB ) {
- switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
- {
- case POR_ID_FIIEX:
- seq_printf(m, "Board %d: EX ports=", i);
- sep = "";
- for( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- ports = 0;
-
- if( pB->i2eChannelMap[box] != 0 ) ++boxes;
- for( j = 0; j < ABS_BIGGEST_BOX; ++j )
- {
- if( pB->i2eChannelMap[box] & 1<< j ) {
- ++ports;
- }
- }
- seq_printf(m, "%s%d", sep, ports);
- sep = ",";
- tports += ports;
- }
- seq_printf(m, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8);
- break;
-
- case POR_ID_II_4:
- seq_printf(m, "Board %d: ISA-4 ports=4 boxes=1", i);
- tports = ports = 4;
- break;
-
- case POR_ID_II_8:
- seq_printf(m, "Board %d: ISA-8-std ports=8 boxes=1", i);
- tports = ports = 8;
- break;
-
- case POR_ID_II_8R:
- seq_printf(m, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i);
- tports = ports = 8;
- break;
-
- default:
- seq_printf(m, "Board %d: unknown", i);
- /* Don't try and probe for minor numbers */
- tports = ports = 0;
- }
-
- } else {
- /* Don't try and probe for minor numbers */
- seq_printf(m, "Board %d: vacant", i);
- tports = ports = 0;
- }
-
- if( tports ) {
- seq_puts(m, " minors=");
- sep = "";
- for ( box = 0; box < ABS_MAX_BOXES; ++box )
- {
- for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
- {
- if ( pB->i2eChannelMap[box] & (1 << j) )
- {
- seq_printf(m, "%s%d", sep,
- j + ABS_BIGGEST_BOX *
- (box+i*ABS_MAX_BOXES));
- sep = ",";
- }
- }
- }
- }
- seq_putc(m, '\n');
- }
- return 0;
- }
-
-static int ip2_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ip2_proc_show, NULL);
-}
-
-static const struct file_operations ip2_proc_fops = {
- .owner = THIS_MODULE,
- .open = ip2_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/******************************************************************************/
-/* Function: ip2trace() */
-/* Parameters: Value to add to trace buffer */
-/* Returns: Nothing */
-/* */
-/* Description: */
-/* */
-/* */
-/******************************************************************************/
-#ifdef IP2DEBUG_TRACE
-void
-ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
-{
- long flags;
- unsigned long *pCode = &codes;
- union ip2breadcrumb bc;
- i2ChanStrPtr pCh;
-
-
- tracebuf[tracestuff++] = jiffies;
- if ( tracestuff == TRACEMAX ) {
- tracestuff = 0;
- }
- if ( tracestuff == tracestrip ) {
- if ( ++tracestrip == TRACEMAX ) {
- tracestrip = 0;
- }
- ++tracewrap;
- }
-
- bc.hdr.port = 0xff & pn;
- bc.hdr.cat = cat;
- bc.hdr.codes = (unsigned char)( codes & 0xff );
- bc.hdr.label = label;
- tracebuf[tracestuff++] = bc.value;
-
- for (;;) {
- if ( tracestuff == TRACEMAX ) {
- tracestuff = 0;
- }
- if ( tracestuff == tracestrip ) {
- if ( ++tracestrip == TRACEMAX ) {
- tracestrip = 0;
- }
- ++tracewrap;
- }
-
- if ( !codes-- )
- break;
-
- tracebuf[tracestuff++] = *++pCode;
- }
-}
-#endif
-
-
-MODULE_LICENSE("GPL");
-
-static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = {
- { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
- { }
-};
-
-MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);
-
-MODULE_FIRMWARE("intelliport2.bin");
diff --git a/drivers/char/ip2/ip2trace.h b/drivers/char/ip2/ip2trace.h
deleted file mode 100644
index da20435..0000000
--- a/drivers/char/ip2/ip2trace.h
+++ /dev/null
@@ -1,42 +0,0 @@
-
-//
-union ip2breadcrumb
-{
- struct {
- unsigned char port, cat, codes, label;
- } __attribute__ ((packed)) hdr;
- unsigned long value;
-};
-
-#define ITRC_NO_PORT 0xFF
-#define CHANN (pCh->port_index)
-
-#define ITRC_ERROR '!'
-#define ITRC_INIT 'A'
-#define ITRC_OPEN 'B'
-#define ITRC_CLOSE 'C'
-#define ITRC_DRAIN 'D'
-#define ITRC_IOCTL 'E'
-#define ITRC_FLUSH 'F'
-#define ITRC_STATUS 'G'
-#define ITRC_HANGUP 'H'
-#define ITRC_INTR 'I'
-#define ITRC_SFLOW 'J'
-#define ITRC_SBCMD 'K'
-#define ITRC_SICMD 'L'
-#define ITRC_MODEM 'M'
-#define ITRC_INPUT 'N'
-#define ITRC_OUTPUT 'O'
-#define ITRC_PUTC 'P'
-#define ITRC_QUEUE 'Q'
-#define ITRC_STFLW 'R'
-#define ITRC_SFIFO 'S'
-#define ITRC_VERIFY 'V'
-#define ITRC_WRITE 'W'
-
-#define ITRC_ENTER 0x00
-#define ITRC_RETURN 0xFF
-
-#define ITRC_QUEUE_ROOM 2
-#define ITRC_QUEUE_CMD 6
-
diff --git a/drivers/char/ip2/ip2types.h b/drivers/char/ip2/ip2types.h
deleted file mode 100644
index 9d67b26..0000000
--- a/drivers/char/ip2/ip2types.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*******************************************************************************
-*
-* (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-* PACKAGE: Linux tty Device Driver for IntelliPort II family of multiport
-* serial I/O controllers.
-*
-* DESCRIPTION: Driver constants and type definitions.
-*
-* NOTES:
-*
-*******************************************************************************/
-#ifndef IP2TYPES_H
-#define IP2TYPES_H
-
-//*************
-//* Constants *
-//*************
-
-// Define some limits for this driver. Ports per board is a hardware limitation
-// that will not change. Current hardware limits this to 64 ports per board.
-// Boards per driver is a self-imposed limit.
-//
-#define IP2_MAX_BOARDS 4
-#define IP2_PORTS_PER_BOARD ABS_MOST_PORTS
-#define IP2_MAX_PORTS (IP2_MAX_BOARDS*IP2_PORTS_PER_BOARD)
-
-#define ISA 0
-#define PCI 1
-#define EISA 2
-
-//********************
-//* Type Definitions *
-//********************
-
-typedef struct tty_struct * PTTY;
-typedef wait_queue_head_t PWAITQ;
-
-typedef unsigned char UCHAR;
-typedef unsigned int UINT;
-typedef unsigned short USHORT;
-typedef unsigned long ULONG;
-
-typedef struct
-{
- short irq[IP2_MAX_BOARDS];
- unsigned short addr[IP2_MAX_BOARDS];
- int type[IP2_MAX_BOARDS];
-#ifdef CONFIG_PCI
- struct pci_dev *pci_dev[IP2_MAX_BOARDS];
-#endif
-} ip2config_t;
-
-#endif
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
deleted file mode 100644
index 0b26627..0000000
--- a/drivers/char/istallion.c
+++ /dev/null
@@ -1,4507 +0,0 @@
-/*****************************************************************************/
-
-/*
- * istallion.c -- stallion intelligent multiport serial driver.
- *
- * Copyright (C) 1996-1999 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/seq_file.h>
-#include <linux/cdk.h>
-#include <linux/comstats.h>
-#include <linux/istallion.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-#include <linux/eisa.h>
-#include <linux/ctype.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/pci.h>
-
-/*****************************************************************************/
-
-/*
- * Define different board types. Not all of the following board types
- * are supported by this driver. But I will use the standard "assigned"
- * board numbers. Currently supported boards are abbreviated as:
- * ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and
- * STAL = Stallion.
- */
-#define BRD_UNKNOWN 0
-#define BRD_STALLION 1
-#define BRD_BRUMBY4 2
-#define BRD_ONBOARD2 3
-#define BRD_ONBOARD 4
-#define BRD_ONBOARDE 7
-#define BRD_ECP 23
-#define BRD_ECPE 24
-#define BRD_ECPMC 25
-#define BRD_ECPPCI 29
-
-#define BRD_BRUMBY BRD_BRUMBY4
-
-/*
- * Define a configuration structure to hold the board configuration.
- * Need to set this up in the code (for now) with the boards that are
- * to be configured into the system. This is what needs to be modified
- * when adding/removing/modifying boards. Each line entry in the
- * stli_brdconf[] array is a board. Each line contains io/irq/memory
- * ranges for that board (as well as what type of board it is).
- * Some examples:
- * { BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },
- * This line will configure an EasyConnection 8/64 at io address 2a0,
- * and shared memory address of cc000. Multiple EasyConnection 8/64
- * boards can share the same shared memory address space. No interrupt
- * is required for this board type.
- * Another example:
- * { BRD_ECPE, 0x5000, 0, 0x80000000, 0, 0 },
- * This line will configure an EasyConnection 8/64 EISA in slot 5 and
- * shared memory address of 0x80000000 (2 GByte). Multiple
- * EasyConnection 8/64 EISA boards can share the same shared memory
- * address space. No interrupt is required for this board type.
- * Another example:
- * { BRD_ONBOARD, 0x240, 0, 0xd0000, 0, 0 },
- * This line will configure an ONboard (ISA type) at io address 240,
- * and shared memory address of d0000. Multiple ONboards can share
- * the same shared memory address space. No interrupt required.
- * Another example:
- * { BRD_BRUMBY4, 0x360, 0, 0xc8000, 0, 0 },
- * This line will configure a Brumby board (any number of ports!) at
- * io address 360 and shared memory address of c8000. All Brumby boards
- * configured into a system must have their own separate io and memory
- * addresses. No interrupt is required.
- * Another example:
- * { BRD_STALLION, 0x330, 0, 0xd0000, 0, 0 },
- * This line will configure an original Stallion board at io address 330
- * and shared memory address d0000 (this would only be valid for a "V4.0"
- * or Rev.O Stallion board). All Stallion boards configured into the
- * system must have their own separate io and memory addresses. No
- * interrupt is required.
- */
-
-struct stlconf {
- int brdtype;
- int ioaddr1;
- int ioaddr2;
- unsigned long memaddr;
- int irq;
- int irqtype;
-};
-
-static unsigned int stli_nrbrds;
-
-/* stli_lock must NOT be taken holding brd_lock */
-static spinlock_t stli_lock; /* TTY logic lock */
-static spinlock_t brd_lock; /* Board logic lock */
-
-/*
- * There is some experimental EISA board detection code in this driver.
- * By default it is disabled, but for those that want to try it out,
- * then set the define below to be 1.
- */
-#define STLI_EISAPROBE 0
-
-/*****************************************************************************/
-
-/*
- * Define some important driver characteristics. Device major numbers
- * allocated as per Linux Device Registry.
- */
-#ifndef STL_SIOMEMMAJOR
-#define STL_SIOMEMMAJOR 28
-#endif
-#ifndef STL_SERIALMAJOR
-#define STL_SERIALMAJOR 24
-#endif
-#ifndef STL_CALLOUTMAJOR
-#define STL_CALLOUTMAJOR 25
-#endif
-
-/*****************************************************************************/
-
-/*
- * Define our local driver identity first. Set up stuff to deal with
- * all the local structures required by a serial tty driver.
- */
-static char *stli_drvtitle = "Stallion Intelligent Multiport Serial Driver";
-static char *stli_drvname = "istallion";
-static char *stli_drvversion = "5.6.0";
-static char *stli_serialname = "ttyE";
-
-static struct tty_driver *stli_serial;
-static const struct tty_port_operations stli_port_ops;
-
-#define STLI_TXBUFSIZE 4096
-
-/*
- * Use a fast local buffer for cooked characters. Typically a whole
- * bunch of cooked characters come in for a port, 1 at a time. So we
- * save those up into a local buffer, then write out the whole lot
- * with a large memcpy. Just use 1 buffer for all ports, since its
- * use it is only need for short periods of time by each port.
- */
-static char *stli_txcookbuf;
-static int stli_txcooksize;
-static int stli_txcookrealsize;
-static struct tty_struct *stli_txcooktty;
-
-/*
- * Define a local default termios struct. All ports will be created
- * with this termios initially. Basically all it defines is a raw port
- * at 9600 baud, 8 data bits, no parity, 1 stop bit.
- */
-static struct ktermios stli_deftermios = {
- .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
- .c_cc = INIT_C_CC,
- .c_ispeed = 9600,
- .c_ospeed = 9600,
-};
-
-/*
- * Define global stats structures. Not used often, and can be
- * re-used for each stats call.
- */
-static comstats_t stli_comstats;
-static combrd_t stli_brdstats;
-static struct asystats stli_cdkstats;
-
-/*****************************************************************************/
-
-static DEFINE_MUTEX(stli_brdslock);
-static struct stlibrd *stli_brds[STL_MAXBRDS];
-
-static int stli_shared;
-
-/*
- * Per board state flags. Used with the state field of the board struct.
- * Not really much here... All we need to do is keep track of whether
- * the board has been detected, and whether it is actually running a slave
- * or not.
- */
-#define BST_FOUND 0
-#define BST_STARTED 1
-#define BST_PROBED 2
-
-/*
- * Define the set of port state flags. These are marked for internal
- * state purposes only, usually to do with the state of communications
- * with the slave. Most of them need to be updated atomically, so always
- * use the bit setting operations (unless protected by cli/sti).
- */
-#define ST_OPENING 2
-#define ST_CLOSING 3
-#define ST_CMDING 4
-#define ST_TXBUSY 5
-#define ST_RXING 6
-#define ST_DOFLUSHRX 7
-#define ST_DOFLUSHTX 8
-#define ST_DOSIGS 9
-#define ST_RXSTOP 10
-#define ST_GETSIGS 11
-
-/*
- * Define an array of board names as printable strings. Handy for
- * referencing boards when printing trace and stuff.
- */
-static char *stli_brdnames[] = {
- "Unknown",
- "Stallion",
- "Brumby",
- "ONboard-MC",
- "ONboard",
- "Brumby",
- "Brumby",
- "ONboard-EI",
- NULL,
- "ONboard",
- "ONboard-MC",
- "ONboard-MC",
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- "EasyIO",
- "EC8/32-AT",
- "EC8/32-MC",
- "EC8/64-AT",
- "EC8/64-EI",
- "EC8/64-MC",
- "EC8/32-PCI",
- "EC8/64-PCI",
- "EasyIO-PCI",
- "EC/RA-PCI",
-};
-
-/*****************************************************************************/
-
-/*
- * Define some string labels for arguments passed from the module
- * load line. These allow for easy board definitions, and easy
- * modification of the io, memory and irq resoucres.
- */
-
-static char *board0[8];
-static char *board1[8];
-static char *board2[8];
-static char *board3[8];
-
-static char **stli_brdsp[] = {
- (char **) &board0,
- (char **) &board1,
- (char **) &board2,
- (char **) &board3
-};
-
-/*
- * Define a set of common board names, and types. This is used to
- * parse any module arguments.
- */
-
-static struct stlibrdtype {
- char *name;
- int type;
-} stli_brdstr[] = {
- { "stallion", BRD_STALLION },
- { "1", BRD_STALLION },
- { "brumby", BRD_BRUMBY },
- { "brumby4", BRD_BRUMBY },
- { "brumby/4", BRD_BRUMBY },
- { "brumby-4", BRD_BRUMBY },
- { "brumby8", BRD_BRUMBY },
- { "brumby/8", BRD_BRUMBY },
- { "brumby-8", BRD_BRUMBY },
- { "brumby16", BRD_BRUMBY },
- { "brumby/16", BRD_BRUMBY },
- { "brumby-16", BRD_BRUMBY },
- { "2", BRD_BRUMBY },
- { "onboard2", BRD_ONBOARD2 },
- { "onboard-2", BRD_ONBOARD2 },
- { "onboard/2", BRD_ONBOARD2 },
- { "onboard-mc", BRD_ONBOARD2 },
- { "onboard/mc", BRD_ONBOARD2 },
- { "onboard-mca", BRD_ONBOARD2 },
- { "onboard/mca", BRD_ONBOARD2 },
- { "3", BRD_ONBOARD2 },
- { "onboard", BRD_ONBOARD },
- { "onboardat", BRD_ONBOARD },
- { "4", BRD_ONBOARD },
- { "onboarde", BRD_ONBOARDE },
- { "onboard-e", BRD_ONBOARDE },
- { "onboard/e", BRD_ONBOARDE },
- { "onboard-ei", BRD_ONBOARDE },
- { "onboard/ei", BRD_ONBOARDE },
- { "7", BRD_ONBOARDE },
- { "ecp", BRD_ECP },
- { "ecpat", BRD_ECP },
- { "ec8/64", BRD_ECP },
- { "ec8/64-at", BRD_ECP },
- { "ec8/64-isa", BRD_ECP },
- { "23", BRD_ECP },
- { "ecpe", BRD_ECPE },
- { "ecpei", BRD_ECPE },
- { "ec8/64-e", BRD_ECPE },
- { "ec8/64-ei", BRD_ECPE },
- { "24", BRD_ECPE },
- { "ecpmc", BRD_ECPMC },
- { "ec8/64-mc", BRD_ECPMC },
- { "ec8/64-mca", BRD_ECPMC },
- { "25", BRD_ECPMC },
- { "ecppci", BRD_ECPPCI },
- { "ec/ra", BRD_ECPPCI },
- { "ec/ra-pc", BRD_ECPPCI },
- { "ec/ra-pci", BRD_ECPPCI },
- { "29", BRD_ECPPCI },
-};
-
-/*
- * Define the module agruments.
- */
-MODULE_AUTHOR("Greg Ungerer");
-MODULE_DESCRIPTION("Stallion Intelligent Multiport Serial Driver");
-MODULE_LICENSE("GPL");
-
-
-module_param_array(board0, charp, NULL, 0);
-MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]");
-module_param_array(board1, charp, NULL, 0);
-MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]");
-module_param_array(board2, charp, NULL, 0);
-MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]");
-module_param_array(board3, charp, NULL, 0);
-MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
-
-#if STLI_EISAPROBE != 0
-/*
- * Set up a default memory address table for EISA board probing.
- * The default addresses are all bellow 1Mbyte, which has to be the
- * case anyway. They should be safe, since we only read values from
- * them, and interrupts are disabled while we do it. If the higher
- * memory support is compiled in then we also try probing around
- * the 1Gb, 2Gb and 3Gb areas as well...
- */
-static unsigned long stli_eisamemprobeaddrs[] = {
- 0xc0000, 0xd0000, 0xe0000, 0xf0000,
- 0x80000000, 0x80010000, 0x80020000, 0x80030000,
- 0x40000000, 0x40010000, 0x40020000, 0x40030000,
- 0xc0000000, 0xc0010000, 0xc0020000, 0xc0030000,
- 0xff000000, 0xff010000, 0xff020000, 0xff030000,
-};
-
-static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs);
-#endif
-
-/*
- * Define the Stallion PCI vendor and device IDs.
- */
-#ifndef PCI_DEVICE_ID_ECRA
-#define PCI_DEVICE_ID_ECRA 0x0004
-#endif
-
-static struct pci_device_id istallion_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA), },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, istallion_pci_tbl);
-
-static struct pci_driver stli_pcidriver;
-
-/*****************************************************************************/
-
-/*
- * Hardware configuration info for ECP boards. These defines apply
- * to the directly accessible io ports of the ECP. There is a set of
- * defines for each ECP board type, ISA, EISA, MCA and PCI.
- */
-#define ECP_IOSIZE 4
-
-#define ECP_MEMSIZE (128 * 1024)
-#define ECP_PCIMEMSIZE (256 * 1024)
-
-#define ECP_ATPAGESIZE (4 * 1024)
-#define ECP_MCPAGESIZE (4 * 1024)
-#define ECP_EIPAGESIZE (64 * 1024)
-#define ECP_PCIPAGESIZE (64 * 1024)
-
-#define STL_EISAID 0x8c4e
-
-/*
- * Important defines for the ISA class of ECP board.
- */
-#define ECP_ATIREG 0
-#define ECP_ATCONFR 1
-#define ECP_ATMEMAR 2
-#define ECP_ATMEMPR 3
-#define ECP_ATSTOP 0x1
-#define ECP_ATINTENAB 0x10
-#define ECP_ATENABLE 0x20
-#define ECP_ATDISABLE 0x00
-#define ECP_ATADDRMASK 0x3f000
-#define ECP_ATADDRSHFT 12
-
-/*
- * Important defines for the EISA class of ECP board.
- */
-#define ECP_EIIREG 0
-#define ECP_EIMEMARL 1
-#define ECP_EICONFR 2
-#define ECP_EIMEMARH 3
-#define ECP_EIENABLE 0x1
-#define ECP_EIDISABLE 0x0
-#define ECP_EISTOP 0x4
-#define ECP_EIEDGE 0x00
-#define ECP_EILEVEL 0x80
-#define ECP_EIADDRMASKL 0x00ff0000
-#define ECP_EIADDRSHFTL 16
-#define ECP_EIADDRMASKH 0xff000000
-#define ECP_EIADDRSHFTH 24
-#define ECP_EIBRDENAB 0xc84
-
-#define ECP_EISAID 0x4
-
-/*
- * Important defines for the Micro-channel class of ECP board.
- * (It has a lot in common with the ISA boards.)
- */
-#define ECP_MCIREG 0
-#define ECP_MCCONFR 1
-#define ECP_MCSTOP 0x20
-#define ECP_MCENABLE 0x80
-#define ECP_MCDISABLE 0x00
-
-/*
- * Important defines for the PCI class of ECP board.
- * (It has a lot in common with the other ECP boards.)
- */
-#define ECP_PCIIREG 0
-#define ECP_PCICONFR 1
-#define ECP_PCISTOP 0x01
-
-/*
- * Hardware configuration info for ONboard and Brumby boards. These
- * defines apply to the directly accessible io ports of these boards.
- */
-#define ONB_IOSIZE 16
-#define ONB_MEMSIZE (64 * 1024)
-#define ONB_ATPAGESIZE (64 * 1024)
-#define ONB_MCPAGESIZE (64 * 1024)
-#define ONB_EIMEMSIZE (128 * 1024)
-#define ONB_EIPAGESIZE (64 * 1024)
-
-/*
- * Important defines for the ISA class of ONboard board.
- */
-#define ONB_ATIREG 0
-#define ONB_ATMEMAR 1
-#define ONB_ATCONFR 2
-#define ONB_ATSTOP 0x4
-#define ONB_ATENABLE 0x01
-#define ONB_ATDISABLE 0x00
-#define ONB_ATADDRMASK 0xff0000
-#define ONB_ATADDRSHFT 16
-
-#define ONB_MEMENABLO 0
-#define ONB_MEMENABHI 0x02
-
-/*
- * Important defines for the EISA class of ONboard board.
- */
-#define ONB_EIIREG 0
-#define ONB_EIMEMARL 1
-#define ONB_EICONFR 2
-#define ONB_EIMEMARH 3
-#define ONB_EIENABLE 0x1
-#define ONB_EIDISABLE 0x0
-#define ONB_EISTOP 0x4
-#define ONB_EIEDGE 0x00
-#define ONB_EILEVEL 0x80
-#define ONB_EIADDRMASKL 0x00ff0000
-#define ONB_EIADDRSHFTL 16
-#define ONB_EIADDRMASKH 0xff000000
-#define ONB_EIADDRSHFTH 24
-#define ONB_EIBRDENAB 0xc84
-
-#define ONB_EISAID 0x1
-
-/*
- * Important defines for the Brumby boards. They are pretty simple,
- * there is not much that is programmably configurable.
- */
-#define BBY_IOSIZE 16
-#define BBY_MEMSIZE (64 * 1024)
-#define BBY_PAGESIZE (16 * 1024)
-
-#define BBY_ATIREG 0
-#define BBY_ATCONFR 1
-#define BBY_ATSTOP 0x4
-
-/*
- * Important defines for the Stallion boards. They are pretty simple,
- * there is not much that is programmably configurable.
- */
-#define STAL_IOSIZE 16
-#define STAL_MEMSIZE (64 * 1024)
-#define STAL_PAGESIZE (64 * 1024)
-
-/*
- * Define the set of status register values for EasyConnection panels.
- * The signature will return with the status value for each panel. From
- * this we can determine what is attached to the board - before we have
- * actually down loaded any code to it.
- */
-#define ECH_PNLSTATUS 2
-#define ECH_PNL16PORT 0x20
-#define ECH_PNLIDMASK 0x07
-#define ECH_PNLXPID 0x40
-#define ECH_PNLINTRPEND 0x80
-
-/*
- * Define some macros to do things to the board. Even those these boards
- * are somewhat related there is often significantly different ways of
- * doing some operation on it (like enable, paging, reset, etc). So each
- * board class has a set of functions which do the commonly required
- * operations. The macros below basically just call these functions,
- * generally checking for a NULL function - which means that the board
- * needs nothing done to it to achieve this operation!
- */
-#define EBRDINIT(brdp) \
- if (brdp->init != NULL) \
- (* brdp->init)(brdp)
-
-#define EBRDENABLE(brdp) \
- if (brdp->enable != NULL) \
- (* brdp->enable)(brdp);
-
-#define EBRDDISABLE(brdp) \
- if (brdp->disable != NULL) \
- (* brdp->disable)(brdp);
-
-#define EBRDINTR(brdp) \
- if (brdp->intr != NULL) \
- (* brdp->intr)(brdp);
-
-#define EBRDRESET(brdp) \
- if (brdp->reset != NULL) \
- (* brdp->reset)(brdp);
-
-#define EBRDGETMEMPTR(brdp,offset) \
- (* brdp->getmemptr)(brdp, offset, __LINE__)
-
-/*
- * Define the maximal baud rate, and the default baud base for ports.
- */
-#define STL_MAXBAUD 460800
-#define STL_BAUDBASE 115200
-#define STL_CLOSEDELAY (5 * HZ / 10)
-
-/*****************************************************************************/
-
-/*
- * Define macros to extract a brd or port number from a minor number.
- */
-#define MINOR2BRD(min) (((min) & 0xc0) >> 6)
-#define MINOR2PORT(min) ((min) & 0x3f)
-
-/*****************************************************************************/
-
-/*
- * Prototype all functions in this driver!
- */
-
-static int stli_parsebrd(struct stlconf *confp, char **argp);
-static int stli_open(struct tty_struct *tty, struct file *filp);
-static void stli_close(struct tty_struct *tty, struct file *filp);
-static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count);
-static int stli_putchar(struct tty_struct *tty, unsigned char ch);
-static void stli_flushchars(struct tty_struct *tty);
-static int stli_writeroom(struct tty_struct *tty);
-static int stli_charsinbuffer(struct tty_struct *tty);
-static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
-static void stli_settermios(struct tty_struct *tty, struct ktermios *old);
-static void stli_throttle(struct tty_struct *tty);
-static void stli_unthrottle(struct tty_struct *tty);
-static void stli_stop(struct tty_struct *tty);
-static void stli_start(struct tty_struct *tty);
-static void stli_flushbuffer(struct tty_struct *tty);
-static int stli_breakctl(struct tty_struct *tty, int state);
-static void stli_waituntilsent(struct tty_struct *tty, int timeout);
-static void stli_sendxchar(struct tty_struct *tty, char ch);
-static void stli_hangup(struct tty_struct *tty);
-
-static int stli_brdinit(struct stlibrd *brdp);
-static int stli_startbrd(struct stlibrd *brdp);
-static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp);
-static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp);
-static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg);
-static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
-static void stli_poll(unsigned long arg);
-static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
-static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
-static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_setport(struct tty_struct *tty);
-static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
-static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
-static long stli_mktiocm(unsigned long sigvalue);
-static void stli_read(struct stlibrd *brdp, struct stliport *portp);
-static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
-static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp);
-static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp);
-static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp);
-static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
-static int stli_getportstruct(struct stliport __user *arg);
-static int stli_getbrdstruct(struct stlibrd __user *arg);
-static struct stlibrd *stli_allocbrd(void);
-
-static void stli_ecpinit(struct stlibrd *brdp);
-static void stli_ecpenable(struct stlibrd *brdp);
-static void stli_ecpdisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_ecpreset(struct stlibrd *brdp);
-static void stli_ecpintr(struct stlibrd *brdp);
-static void stli_ecpeiinit(struct stlibrd *brdp);
-static void stli_ecpeienable(struct stlibrd *brdp);
-static void stli_ecpeidisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_ecpeireset(struct stlibrd *brdp);
-static void stli_ecpmcenable(struct stlibrd *brdp);
-static void stli_ecpmcdisable(struct stlibrd *brdp);
-static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_ecpmcreset(struct stlibrd *brdp);
-static void stli_ecppciinit(struct stlibrd *brdp);
-static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_ecppcireset(struct stlibrd *brdp);
-
-static void stli_onbinit(struct stlibrd *brdp);
-static void stli_onbenable(struct stlibrd *brdp);
-static void stli_onbdisable(struct stlibrd *brdp);
-static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_onbreset(struct stlibrd *brdp);
-static void stli_onbeinit(struct stlibrd *brdp);
-static void stli_onbeenable(struct stlibrd *brdp);
-static void stli_onbedisable(struct stlibrd *brdp);
-static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_onbereset(struct stlibrd *brdp);
-static void stli_bbyinit(struct stlibrd *brdp);
-static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_bbyreset(struct stlibrd *brdp);
-static void stli_stalinit(struct stlibrd *brdp);
-static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line);
-static void stli_stalreset(struct stlibrd *brdp);
-
-static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr, unsigned int portnr);
-
-static int stli_initecp(struct stlibrd *brdp);
-static int stli_initonb(struct stlibrd *brdp);
-#if STLI_EISAPROBE != 0
-static int stli_eisamemprobe(struct stlibrd *brdp);
-#endif
-static int stli_initports(struct stlibrd *brdp);
-
-/*****************************************************************************/
-
-/*
- * Define the driver info for a user level shared memory device. This
- * device will work sort of like the /dev/kmem device - except that it
- * will give access to the shared memory on the Stallion intelligent
- * board. This is also a very useful debugging tool.
- */
-static const struct file_operations stli_fsiomem = {
- .owner = THIS_MODULE,
- .read = stli_memread,
- .write = stli_memwrite,
- .unlocked_ioctl = stli_memioctl,
- .llseek = default_llseek,
-};
-
-/*****************************************************************************/
-
-/*
- * Define a timer_list entry for our poll routine. The slave board
- * is polled every so often to see if anything needs doing. This is
- * much cheaper on host cpu than using interrupts. It turns out to
- * not increase character latency by much either...
- */
-static DEFINE_TIMER(stli_timerlist, stli_poll, 0, 0);
-
-static int stli_timeron;
-
-/*
- * Define the calculation for the timeout routine.
- */
-#define STLI_TIMEOUT (jiffies + 1)
-
-/*****************************************************************************/
-
-static struct class *istallion_class;
-
-static void stli_cleanup_ports(struct stlibrd *brdp)
-{
- struct stliport *portp;
- unsigned int j;
- struct tty_struct *tty;
-
- for (j = 0; j < STL_MAXPORTS; j++) {
- portp = brdp->ports[j];
- if (portp != NULL) {
- tty = tty_port_tty_get(&portp->port);
- if (tty != NULL) {
- tty_hangup(tty);
- tty_kref_put(tty);
- }
- kfree(portp);
- }
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Parse the supplied argument string, into the board conf struct.
- */
-
-static int stli_parsebrd(struct stlconf *confp, char **argp)
-{
- unsigned int i;
- char *sp;
-
- if (argp[0] == NULL || *argp[0] == 0)
- return 0;
-
- for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
- *sp = tolower(*sp);
-
- for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) {
- if (strcmp(stli_brdstr[i].name, argp[0]) == 0)
- break;
- }
- if (i == ARRAY_SIZE(stli_brdstr)) {
- printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
- return 0;
- }
-
- confp->brdtype = stli_brdstr[i].type;
- if (argp[1] != NULL && *argp[1] != 0)
- confp->ioaddr1 = simple_strtoul(argp[1], NULL, 0);
- if (argp[2] != NULL && *argp[2] != 0)
- confp->memaddr = simple_strtoul(argp[2], NULL, 0);
- return(1);
-}
-
-/*****************************************************************************/
-
-/*
- * On the first open of the device setup the port hardware, and
- * initialize the per port data structure. Since initializing the port
- * requires several commands to the board we will need to wait for any
- * other open that is already initializing the port.
- *
- * Locking: protected by the port mutex.
- */
-
-static int stli_activate(struct tty_port *port, struct tty_struct *tty)
-{
- struct stliport *portp = container_of(port, struct stliport, port);
- struct stlibrd *brdp = stli_brds[portp->brdnr];
- int rc;
-
- if ((rc = stli_initopen(tty, brdp, portp)) >= 0)
- clear_bit(TTY_IO_ERROR, &tty->flags);
- wake_up_interruptible(&portp->raw_wait);
- return rc;
-}
-
-static int stli_open(struct tty_struct *tty, struct file *filp)
-{
- struct stlibrd *brdp;
- struct stliport *portp;
- unsigned int minordev, brdnr, portnr;
-
- minordev = tty->index;
- brdnr = MINOR2BRD(minordev);
- if (brdnr >= stli_nrbrds)
- return -ENODEV;
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- return -ENODEV;
- if (!test_bit(BST_STARTED, &brdp->state))
- return -ENODEV;
- portnr = MINOR2PORT(minordev);
- if (portnr > brdp->nrports)
- return -ENODEV;
-
- portp = brdp->ports[portnr];
- if (portp == NULL)
- return -ENODEV;
- if (portp->devnr < 1)
- return -ENODEV;
-
- tty->driver_data = portp;
- return tty_port_open(&portp->port, tty, filp);
-}
-
-
-/*****************************************************************************/
-
-static void stli_shutdown(struct tty_port *port)
-{
- struct stlibrd *brdp;
- unsigned long ftype;
- unsigned long flags;
- struct stliport *portp = container_of(port, struct stliport, port);
-
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
- /*
- * May want to wait for data to drain before closing. The BUSY
- * flag keeps track of whether we are still transmitting or not.
- * It is updated by messages from the slave - indicating when all
- * chars really have drained.
- */
-
- if (!test_bit(ST_CLOSING, &portp->state))
- stli_rawclose(brdp, portp, 0, 0);
-
- spin_lock_irqsave(&stli_lock, flags);
- clear_bit(ST_TXBUSY, &portp->state);
- clear_bit(ST_RXSTOP, &portp->state);
- spin_unlock_irqrestore(&stli_lock, flags);
-
- ftype = FLUSHTX | FLUSHRX;
- stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
-}
-
-static void stli_close(struct tty_struct *tty, struct file *filp)
-{
- struct stliport *portp = tty->driver_data;
- unsigned long flags;
- if (portp == NULL)
- return;
- spin_lock_irqsave(&stli_lock, flags);
- /* Flush any internal buffering out first */
- if (tty == stli_txcooktty)
- stli_flushchars(tty);
- spin_unlock_irqrestore(&stli_lock, flags);
- tty_port_close(&portp->port, tty, filp);
-}
-
-/*****************************************************************************/
-
-/*
- * Carry out first open operations on a port. This involves a number of
- * commands to be sent to the slave. We need to open the port, set the
- * notification events, set the initial port settings, get and set the
- * initial signal values. We sleep and wait in between each one. But
- * this still all happens pretty quickly.
- */
-
-static int stli_initopen(struct tty_struct *tty,
- struct stlibrd *brdp, struct stliport *portp)
-{
- asynotify_t nt;
- asyport_t aport;
- int rc;
-
- if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0)
- return rc;
-
- memset(&nt, 0, sizeof(asynotify_t));
- nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK);
- nt.signal = SG_DCD;
- if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt,
- sizeof(asynotify_t), 0)) < 0)
- return rc;
-
- stli_mkasyport(tty, portp, &aport, tty->termios);
- if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
- sizeof(asyport_t), 0)) < 0)
- return rc;
-
- set_bit(ST_GETSIGS, &portp->state);
- if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 1)) < 0)
- return rc;
- if (test_and_clear_bit(ST_GETSIGS, &portp->state))
- portp->sigs = stli_mktiocm(portp->asig.sigvalue);
- stli_mkasysigs(&portp->asig, 1, 1);
- if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 0)) < 0)
- return rc;
-
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Send an open message to the slave. This will sleep waiting for the
- * acknowledgement, so must have user context. We need to co-ordinate
- * with close events here, since we don't want open and close events
- * to overlap.
- */
-
-static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
-{
- cdkhdr_t __iomem *hdrp;
- cdkctrl_t __iomem *cp;
- unsigned char __iomem *bits;
- unsigned long flags;
- int rc;
-
-/*
- * Send a message to the slave to open this port.
- */
-
-/*
- * Slave is already closing this port. This can happen if a hangup
- * occurs on this port. So we must wait until it is complete. The
- * order of opens and closes may not be preserved across shared
- * memory, so we must wait until it is complete.
- */
- wait_event_interruptible_tty(portp->raw_wait,
- !test_bit(ST_CLOSING, &portp->state));
- if (signal_pending(current)) {
- return -ERESTARTSYS;
- }
-
-/*
- * Everything is ready now, so write the open message into shared
- * memory. Once the message is in set the service bits to say that
- * this port wants service.
- */
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
- writel(arg, &cp->openarg);
- writeb(1, &cp->open);
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
- portp->portidx;
- writeb(readb(bits) | portp->portbit, bits);
- EBRDDISABLE(brdp);
-
- if (wait == 0) {
- spin_unlock_irqrestore(&brd_lock, flags);
- return 0;
- }
-
-/*
- * Slave is in action, so now we must wait for the open acknowledgment
- * to come back.
- */
- rc = 0;
- set_bit(ST_OPENING, &portp->state);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- wait_event_interruptible_tty(portp->raw_wait,
- !test_bit(ST_OPENING, &portp->state));
- if (signal_pending(current))
- rc = -ERESTARTSYS;
-
- if ((rc == 0) && (portp->rc != 0))
- rc = -EIO;
- return rc;
-}
-
-/*****************************************************************************/
-
-/*
- * Send a close message to the slave. Normally this will sleep waiting
- * for the acknowledgement, but if wait parameter is 0 it will not. If
- * wait is true then must have user context (to sleep).
- */
-
-static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait)
-{
- cdkhdr_t __iomem *hdrp;
- cdkctrl_t __iomem *cp;
- unsigned char __iomem *bits;
- unsigned long flags;
- int rc;
-
-/*
- * Slave is already closing this port. This can happen if a hangup
- * occurs on this port.
- */
- if (wait) {
- wait_event_interruptible_tty(portp->raw_wait,
- !test_bit(ST_CLOSING, &portp->state));
- if (signal_pending(current)) {
- return -ERESTARTSYS;
- }
- }
-
-/*
- * Write the close command into shared memory.
- */
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
- writel(arg, &cp->closearg);
- writeb(1, &cp->close);
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
- portp->portidx;
- writeb(readb(bits) |portp->portbit, bits);
- EBRDDISABLE(brdp);
-
- set_bit(ST_CLOSING, &portp->state);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- if (wait == 0)
- return 0;
-
-/*
- * Slave is in action, so now we must wait for the open acknowledgment
- * to come back.
- */
- rc = 0;
- wait_event_interruptible_tty(portp->raw_wait,
- !test_bit(ST_CLOSING, &portp->state));
- if (signal_pending(current))
- rc = -ERESTARTSYS;
-
- if ((rc == 0) && (portp->rc != 0))
- rc = -EIO;
- return rc;
-}
-
-/*****************************************************************************/
-
-/*
- * Send a command to the slave and wait for the response. This must
- * have user context (it sleeps). This routine is generic in that it
- * can send any type of command. Its purpose is to wait for that command
- * to complete (as opposed to initiating the command then returning).
- */
-
-static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
- /*
- * no need for wait_event_tty because clearing ST_CMDING cannot block
- * on BTM
- */
- wait_event_interruptible(portp->raw_wait,
- !test_bit(ST_CMDING, &portp->state));
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
-
- wait_event_interruptible(portp->raw_wait,
- !test_bit(ST_CMDING, &portp->state));
- if (signal_pending(current))
- return -ERESTARTSYS;
-
- if (portp->rc != 0)
- return -EIO;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Send the termios settings for this port to the slave. This sleeps
- * waiting for the command to complete - so must have user context.
- */
-
-static int stli_setport(struct tty_struct *tty)
-{
- struct stliport *portp = tty->driver_data;
- struct stlibrd *brdp;
- asyport_t aport;
-
- if (portp == NULL)
- return -ENODEV;
- if (portp->brdnr >= stli_nrbrds)
- return -ENODEV;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return -ENODEV;
-
- stli_mkasyport(tty, portp, &aport, tty->termios);
- return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
-}
-
-/*****************************************************************************/
-
-static int stli_carrier_raised(struct tty_port *port)
-{
- struct stliport *portp = container_of(port, struct stliport, port);
- return (portp->sigs & TIOCM_CD) ? 1 : 0;
-}
-
-static void stli_dtr_rts(struct tty_port *port, int on)
-{
- struct stliport *portp = container_of(port, struct stliport, port);
- struct stlibrd *brdp = stli_brds[portp->brdnr];
- stli_mkasysigs(&portp->asig, on, on);
- if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 0) < 0)
- printk(KERN_WARNING "istallion: dtr set failed.\n");
-}
-
-
-/*****************************************************************************/
-
-/*
- * Write routine. Take the data and put it in the shared memory ring
- * queue. If port is not already sending chars then need to mark the
- * service bits for this port.
- */
-
-static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- cdkasy_t __iomem *ap;
- cdkhdr_t __iomem *hdrp;
- unsigned char __iomem *bits;
- unsigned char __iomem *shbuf;
- unsigned char *chbuf;
- struct stliport *portp;
- struct stlibrd *brdp;
- unsigned int len, stlen, head, tail, size;
- unsigned long flags;
-
- if (tty == stli_txcooktty)
- stli_flushchars(tty);
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
- chbuf = (unsigned char *) buf;
-
-/*
- * All data is now local, shove as much as possible into shared memory.
- */
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- head = (unsigned int) readw(&ap->txq.head);
- tail = (unsigned int) readw(&ap->txq.tail);
- if (tail != ((unsigned int) readw(&ap->txq.tail)))
- tail = (unsigned int) readw(&ap->txq.tail);
- size = portp->txsize;
- if (head >= tail) {
- len = size - (head - tail) - 1;
- stlen = size - head;
- } else {
- len = tail - head - 1;
- stlen = len;
- }
-
- len = min(len, (unsigned int)count);
- count = 0;
- shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset);
-
- while (len > 0) {
- stlen = min(len, stlen);
- memcpy_toio(shbuf + head, chbuf, stlen);
- chbuf += stlen;
- len -= stlen;
- count += stlen;
- head += stlen;
- if (head >= size) {
- head = 0;
- stlen = tail;
- }
- }
-
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- writew(head, &ap->txq.head);
- if (test_bit(ST_TXBUSY, &portp->state)) {
- if (readl(&ap->changed.data) & DT_TXEMPTY)
- writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
- }
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
- portp->portidx;
- writeb(readb(bits) | portp->portbit, bits);
- set_bit(ST_TXBUSY, &portp->state);
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- return(count);
-}
-
-/*****************************************************************************/
-
-/*
- * Output a single character. We put it into a temporary local buffer
- * (for speed) then write out that buffer when the flushchars routine
- * is called. There is a safety catch here so that if some other port
- * writes chars before the current buffer has been, then we write them
- * first them do the new ports.
- */
-
-static int stli_putchar(struct tty_struct *tty, unsigned char ch)
-{
- if (tty != stli_txcooktty) {
- if (stli_txcooktty != NULL)
- stli_flushchars(stli_txcooktty);
- stli_txcooktty = tty;
- }
-
- stli_txcookbuf[stli_txcooksize++] = ch;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Transfer characters from the local TX cooking buffer to the board.
- * We sort of ignore the tty that gets passed in here. We rely on the
- * info stored with the TX cook buffer to tell us which port to flush
- * the data on. In any case we clean out the TX cook buffer, for re-use
- * by someone else.
- */
-
-static void stli_flushchars(struct tty_struct *tty)
-{
- cdkhdr_t __iomem *hdrp;
- unsigned char __iomem *bits;
- cdkasy_t __iomem *ap;
- struct tty_struct *cooktty;
- struct stliport *portp;
- struct stlibrd *brdp;
- unsigned int len, stlen, head, tail, size, count, cooksize;
- unsigned char *buf;
- unsigned char __iomem *shbuf;
- unsigned long flags;
-
- cooksize = stli_txcooksize;
- cooktty = stli_txcooktty;
- stli_txcooksize = 0;
- stli_txcookrealsize = 0;
- stli_txcooktty = NULL;
-
- if (cooktty == NULL)
- return;
- if (tty != cooktty)
- tty = cooktty;
- if (cooksize == 0)
- return;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
-
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- head = (unsigned int) readw(&ap->txq.head);
- tail = (unsigned int) readw(&ap->txq.tail);
- if (tail != ((unsigned int) readw(&ap->txq.tail)))
- tail = (unsigned int) readw(&ap->txq.tail);
- size = portp->txsize;
- if (head >= tail) {
- len = size - (head - tail) - 1;
- stlen = size - head;
- } else {
- len = tail - head - 1;
- stlen = len;
- }
-
- len = min(len, cooksize);
- count = 0;
- shbuf = EBRDGETMEMPTR(brdp, portp->txoffset);
- buf = stli_txcookbuf;
-
- while (len > 0) {
- stlen = min(len, stlen);
- memcpy_toio(shbuf + head, buf, stlen);
- buf += stlen;
- len -= stlen;
- count += stlen;
- head += stlen;
- if (head >= size) {
- head = 0;
- stlen = tail;
- }
- }
-
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- writew(head, &ap->txq.head);
-
- if (test_bit(ST_TXBUSY, &portp->state)) {
- if (readl(&ap->changed.data) & DT_TXEMPTY)
- writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
- }
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
- portp->portidx;
- writeb(readb(bits) | portp->portbit, bits);
- set_bit(ST_TXBUSY, &portp->state);
-
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static int stli_writeroom(struct tty_struct *tty)
-{
- cdkasyrq_t __iomem *rp;
- struct stliport *portp;
- struct stlibrd *brdp;
- unsigned int head, tail, len;
- unsigned long flags;
-
- if (tty == stli_txcooktty) {
- if (stli_txcookrealsize != 0) {
- len = stli_txcookrealsize - stli_txcooksize;
- return len;
- }
- }
-
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
-
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
- head = (unsigned int) readw(&rp->head);
- tail = (unsigned int) readw(&rp->tail);
- if (tail != ((unsigned int) readw(&rp->tail)))
- tail = (unsigned int) readw(&rp->tail);
- len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head);
- len--;
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- if (tty == stli_txcooktty) {
- stli_txcookrealsize = len;
- len -= stli_txcooksize;
- }
- return len;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the number of characters in the transmit buffer. Normally we
- * will return the number of chars in the shared memory ring queue.
- * We need to kludge around the case where the shared memory buffer is
- * empty but not all characters have drained yet, for this case just
- * return that there is 1 character in the buffer!
- */
-
-static int stli_charsinbuffer(struct tty_struct *tty)
-{
- cdkasyrq_t __iomem *rp;
- struct stliport *portp;
- struct stlibrd *brdp;
- unsigned int head, tail, len;
- unsigned long flags;
-
- if (tty == stli_txcooktty)
- stli_flushchars(tty);
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
-
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
- head = (unsigned int) readw(&rp->head);
- tail = (unsigned int) readw(&rp->tail);
- if (tail != ((unsigned int) readw(&rp->tail)))
- tail = (unsigned int) readw(&rp->tail);
- len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head));
- if ((len == 0) && test_bit(ST_TXBUSY, &portp->state))
- len = 1;
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- return len;
-}
-
-/*****************************************************************************/
-
-/*
- * Generate the serial struct info.
- */
-
-static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp)
-{
- struct serial_struct sio;
- struct stlibrd *brdp;
-
- memset(&sio, 0, sizeof(struct serial_struct));
- sio.type = PORT_UNKNOWN;
- sio.line = portp->portnr;
- sio.irq = 0;
- sio.flags = portp->port.flags;
- sio.baud_base = portp->baud_base;
- sio.close_delay = portp->port.close_delay;
- sio.closing_wait = portp->closing_wait;
- sio.custom_divisor = portp->custom_divisor;
- sio.xmit_fifo_size = 0;
- sio.hub6 = 0;
-
- brdp = stli_brds[portp->brdnr];
- if (brdp != NULL)
- sio.port = brdp->iobase;
-
- return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ?
- -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Set port according to the serial struct info.
- * At this point we do not do any auto-configure stuff, so we will
- * just quietly ignore any requests to change irq, etc.
- */
-
-static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
-{
- struct serial_struct sio;
- int rc;
- struct stliport *portp = tty->driver_data;
-
- if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
- return -EFAULT;
- if (!capable(CAP_SYS_ADMIN)) {
- if ((sio.baud_base != portp->baud_base) ||
- (sio.close_delay != portp->port.close_delay) ||
- ((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->port.flags & ~ASYNC_USR_MASK)))
- return -EPERM;
- }
-
- portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
- (sio.flags & ASYNC_USR_MASK);
- portp->baud_base = sio.baud_base;
- portp->port.close_delay = sio.close_delay;
- portp->closing_wait = sio.closing_wait;
- portp->custom_divisor = sio.custom_divisor;
-
- if ((rc = stli_setport(tty)) < 0)
- return rc;
- return 0;
-}
-
-/*****************************************************************************/
-
-static int stli_tiocmget(struct tty_struct *tty)
-{
- struct stliport *portp = tty->driver_data;
- struct stlibrd *brdp;
- int rc;
-
- if (portp == NULL)
- return -ENODEV;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS,
- &portp->asig, sizeof(asysigs_t), 1)) < 0)
- return rc;
-
- return stli_mktiocm(portp->asig.sigvalue);
-}
-
-static int stli_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct stliport *portp = tty->driver_data;
- struct stlibrd *brdp;
- int rts = -1, dtr = -1;
-
- if (portp == NULL)
- return -ENODEV;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- stli_mkasysigs(&portp->asig, dtr, rts);
-
- return stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 0);
-}
-
-static int stli_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
- struct stliport *portp;
- struct stlibrd *brdp;
- int rc;
- void __user *argp = (void __user *)arg;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -ENODEV;
- if (portp->brdnr >= stli_nrbrds)
- return 0;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return 0;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
- }
-
- rc = 0;
-
- switch (cmd) {
- case TIOCGSERIAL:
- rc = stli_getserial(portp, argp);
- break;
- case TIOCSSERIAL:
- rc = stli_setserial(tty, argp);
- break;
- case STL_GETPFLAG:
- rc = put_user(portp->pflag, (unsigned __user *)argp);
- break;
- case STL_SETPFLAG:
- if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0)
- stli_setport(tty);
- break;
- case COM_GETPORTSTATS:
- rc = stli_getportstats(tty, portp, argp);
- break;
- case COM_CLRPORTSTATS:
- rc = stli_clrportstats(portp, argp);
- break;
- case TIOCSERCONFIG:
- case TIOCSERGWILD:
- case TIOCSERSWILD:
- case TIOCSERGETLSR:
- case TIOCSERGSTRUCT:
- case TIOCSERGETMULTI:
- case TIOCSERSETMULTI:
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
-
- return rc;
-}
-
-/*****************************************************************************/
-
-/*
- * This routine assumes that we have user context and can sleep.
- * Looks like it is true for the current ttys implementation..!!
- */
-
-static void stli_settermios(struct tty_struct *tty, struct ktermios *old)
-{
- struct stliport *portp;
- struct stlibrd *brdp;
- struct ktermios *tiosp;
- asyport_t aport;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
- tiosp = tty->termios;
-
- stli_mkasyport(tty, portp, &aport, tiosp);
- stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
- stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1);
- stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
- sizeof(asysigs_t), 0);
- if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0))
- tty->hw_stopped = 0;
- if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
- wake_up_interruptible(&portp->port.open_wait);
-}
-
-/*****************************************************************************/
-
-/*
- * Attempt to flow control who ever is sending us data. We won't really
- * do any flow control action here. We can't directly, and even if we
- * wanted to we would have to send a command to the slave. The slave
- * knows how to flow control, and will do so when its buffers reach its
- * internal high water marks. So what we will do is set a local state
- * bit that will stop us sending any RX data up from the poll routine
- * (which is the place where RX data from the slave is handled).
- */
-
-static void stli_throttle(struct tty_struct *tty)
-{
- struct stliport *portp = tty->driver_data;
- if (portp == NULL)
- return;
- set_bit(ST_RXSTOP, &portp->state);
-}
-
-/*****************************************************************************/
-
-/*
- * Unflow control the device sending us data... That means that all
- * we have to do is clear the RXSTOP state bit. The next poll call
- * will then be able to pass the RX data back up.
- */
-
-static void stli_unthrottle(struct tty_struct *tty)
-{
- struct stliport *portp = tty->driver_data;
- if (portp == NULL)
- return;
- clear_bit(ST_RXSTOP, &portp->state);
-}
-
-/*****************************************************************************/
-
-/*
- * Stop the transmitter.
- */
-
-static void stli_stop(struct tty_struct *tty)
-{
-}
-
-/*****************************************************************************/
-
-/*
- * Start the transmitter again.
- */
-
-static void stli_start(struct tty_struct *tty)
-{
-}
-
-/*****************************************************************************/
-
-
-/*
- * Hangup this port. This is pretty much like closing the port, only
- * a little more brutal. No waiting for data to drain. Shutdown the
- * port and maybe drop signals. This is rather tricky really. We want
- * to close the port as well.
- */
-
-static void stli_hangup(struct tty_struct *tty)
-{
- struct stliport *portp = tty->driver_data;
- tty_port_hangup(&portp->port);
-}
-
-/*****************************************************************************/
-
-/*
- * Flush characters from the lower buffer. We may not have user context
- * so we cannot sleep waiting for it to complete. Also we need to check
- * if there is chars for this port in the TX cook buffer, and flush them
- * as well.
- */
-
-static void stli_flushbuffer(struct tty_struct *tty)
-{
- struct stliport *portp;
- struct stlibrd *brdp;
- unsigned long ftype, flags;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- if (tty == stli_txcooktty) {
- stli_txcooktty = NULL;
- stli_txcooksize = 0;
- stli_txcookrealsize = 0;
- }
- if (test_bit(ST_CMDING, &portp->state)) {
- set_bit(ST_DOFLUSHTX, &portp->state);
- } else {
- ftype = FLUSHTX;
- if (test_bit(ST_DOFLUSHRX, &portp->state)) {
- ftype |= FLUSHRX;
- clear_bit(ST_DOFLUSHRX, &portp->state);
- }
- __stli_sendcmd(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
- }
- spin_unlock_irqrestore(&brd_lock, flags);
- tty_wakeup(tty);
-}
-
-/*****************************************************************************/
-
-static int stli_breakctl(struct tty_struct *tty, int state)
-{
- struct stlibrd *brdp;
- struct stliport *portp;
- long arg;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -EINVAL;
- if (portp->brdnr >= stli_nrbrds)
- return -EINVAL;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return -EINVAL;
-
- arg = (state == -1) ? BREAKON : BREAKOFF;
- stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0);
- return 0;
-}
-
-/*****************************************************************************/
-
-static void stli_waituntilsent(struct tty_struct *tty, int timeout)
-{
- struct stliport *portp;
- unsigned long tend;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- if (timeout == 0)
- timeout = HZ;
- tend = jiffies + timeout;
-
- while (test_bit(ST_TXBUSY, &portp->state)) {
- if (signal_pending(current))
- break;
- msleep_interruptible(20);
- if (time_after_eq(jiffies, tend))
- break;
- }
-}
-
-/*****************************************************************************/
-
-static void stli_sendxchar(struct tty_struct *tty, char ch)
-{
- struct stlibrd *brdp;
- struct stliport *portp;
- asyctrl_t actrl;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->brdnr >= stli_nrbrds)
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
- memset(&actrl, 0, sizeof(asyctrl_t));
- if (ch == STOP_CHAR(tty)) {
- actrl.rxctrl = CT_STOPFLOW;
- } else if (ch == START_CHAR(tty)) {
- actrl.rxctrl = CT_STARTFLOW;
- } else {
- actrl.txctrl = CT_SENDCHR;
- actrl.tximdch = ch;
- }
- stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
-}
-
-static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr)
-{
- char *uart;
- int rc;
-
- rc = stli_portcmdstats(NULL, portp);
-
- uart = "UNKNOWN";
- if (test_bit(BST_STARTED, &brdp->state)) {
- switch (stli_comstats.hwid) {
- case 0: uart = "2681"; break;
- case 1: uart = "SC26198"; break;
- default:uart = "CD1400"; break;
- }
- }
- seq_printf(m, "%d: uart:%s ", portnr, uart);
-
- if (test_bit(BST_STARTED, &brdp->state) && rc >= 0) {
- char sep;
-
- seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
- (int) stli_comstats.rxtotal);
-
- if (stli_comstats.rxframing)
- seq_printf(m, " fe:%d",
- (int) stli_comstats.rxframing);
- if (stli_comstats.rxparity)
- seq_printf(m, " pe:%d",
- (int) stli_comstats.rxparity);
- if (stli_comstats.rxbreaks)
- seq_printf(m, " brk:%d",
- (int) stli_comstats.rxbreaks);
- if (stli_comstats.rxoverrun)
- seq_printf(m, " oe:%d",
- (int) stli_comstats.rxoverrun);
-
- sep = ' ';
- if (stli_comstats.signals & TIOCM_RTS) {
- seq_printf(m, "%c%s", sep, "RTS");
- sep = '|';
- }
- if (stli_comstats.signals & TIOCM_CTS) {
- seq_printf(m, "%c%s", sep, "CTS");
- sep = '|';
- }
- if (stli_comstats.signals & TIOCM_DTR) {
- seq_printf(m, "%c%s", sep, "DTR");
- sep = '|';
- }
- if (stli_comstats.signals & TIOCM_CD) {
- seq_printf(m, "%c%s", sep, "DCD");
- sep = '|';
- }
- if (stli_comstats.signals & TIOCM_DSR) {
- seq_printf(m, "%c%s", sep, "DSR");
- sep = '|';
- }
- }
- seq_putc(m, '\n');
-}
-
-/*****************************************************************************/
-
-/*
- * Port info, read from the /proc file system.
- */
-
-static int stli_proc_show(struct seq_file *m, void *v)
-{
- struct stlibrd *brdp;
- struct stliport *portp;
- unsigned int brdnr, portnr, totalport;
-
- totalport = 0;
-
- seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion);
-
-/*
- * We scan through for each board, panel and port. The offset is
- * calculated on the fly, and irrelevant ports are skipped.
- */
- for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- continue;
- if (brdp->state == 0)
- continue;
-
- totalport = brdnr * STL_MAXPORTS;
- for (portnr = 0; (portnr < brdp->nrports); portnr++,
- totalport++) {
- portp = brdp->ports[portnr];
- if (portp == NULL)
- continue;
- stli_portinfo(m, brdp, portp, totalport);
- }
- }
- return 0;
-}
-
-static int stli_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, stli_proc_show, NULL);
-}
-
-static const struct file_operations stli_proc_fops = {
- .owner = THIS_MODULE,
- .open = stli_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/*****************************************************************************/
-
-/*
- * Generic send command routine. This will send a message to the slave,
- * of the specified type with the specified argument. Must be very
- * careful of data that will be copied out from shared memory -
- * containing command results. The command completion is all done from
- * a poll routine that does not have user context. Therefore you cannot
- * copy back directly into user space, or to the kernel stack of a
- * process. This routine does not sleep, so can be called from anywhere.
- *
- * The caller must hold the brd_lock (see also stli_sendcmd the usual
- * entry point)
- */
-
-static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
- cdkhdr_t __iomem *hdrp;
- cdkctrl_t __iomem *cp;
- unsigned char __iomem *bits;
-
- if (test_bit(ST_CMDING, &portp->state)) {
- printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
- (int) cmd);
- return;
- }
-
- EBRDENABLE(brdp);
- cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
- if (size > 0) {
- memcpy_toio((void __iomem *) &(cp->args[0]), arg, size);
- if (copyback) {
- portp->argp = arg;
- portp->argsize = size;
- }
- }
- writel(0, &cp->status);
- writel(cmd, &cp->cmd);
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
- portp->portidx;
- writeb(readb(bits) | portp->portbit, bits);
- set_bit(ST_CMDING, &portp->state);
- EBRDDISABLE(brdp);
-}
-
-static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&brd_lock, flags);
- __stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Read data from shared memory. This assumes that the shared memory
- * is enabled and that interrupts are off. Basically we just empty out
- * the shared memory buffer into the tty buffer. Must be careful to
- * handle the case where we fill up the tty buffer, but still have
- * more chars to unload.
- */
-
-static void stli_read(struct stlibrd *brdp, struct stliport *portp)
-{
- cdkasyrq_t __iomem *rp;
- char __iomem *shbuf;
- struct tty_struct *tty;
- unsigned int head, tail, size;
- unsigned int len, stlen;
-
- if (test_bit(ST_RXSTOP, &portp->state))
- return;
- tty = tty_port_tty_get(&portp->port);
- if (tty == NULL)
- return;
-
- rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
- head = (unsigned int) readw(&rp->head);
- if (head != ((unsigned int) readw(&rp->head)))
- head = (unsigned int) readw(&rp->head);
- tail = (unsigned int) readw(&rp->tail);
- size = portp->rxsize;
- if (head >= tail) {
- len = head - tail;
- stlen = len;
- } else {
- len = size - (tail - head);
- stlen = size - tail;
- }
-
- len = tty_buffer_request_room(tty, len);
-
- shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->rxoffset);
-
- while (len > 0) {
- unsigned char *cptr;
-
- stlen = min(len, stlen);
- tty_prepare_flip_string(tty, &cptr, stlen);
- memcpy_fromio(cptr, shbuf + tail, stlen);
- len -= stlen;
- tail += stlen;
- if (tail >= size) {
- tail = 0;
- stlen = head;
- }
- }
- rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
- writew(tail, &rp->tail);
-
- if (head != tail)
- set_bit(ST_RXING, &portp->state);
-
- tty_schedule_flip(tty);
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- * Set up and carry out any delayed commands. There is only a small set
- * of slave commands that can be done "off-level". So it is not too
- * difficult to deal with them here.
- */
-
-static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp)
-{
- int cmd;
-
- if (test_bit(ST_DOSIGS, &portp->state)) {
- if (test_bit(ST_DOFLUSHTX, &portp->state) &&
- test_bit(ST_DOFLUSHRX, &portp->state))
- cmd = A_SETSIGNALSF;
- else if (test_bit(ST_DOFLUSHTX, &portp->state))
- cmd = A_SETSIGNALSFTX;
- else if (test_bit(ST_DOFLUSHRX, &portp->state))
- cmd = A_SETSIGNALSFRX;
- else
- cmd = A_SETSIGNALS;
- clear_bit(ST_DOFLUSHTX, &portp->state);
- clear_bit(ST_DOFLUSHRX, &portp->state);
- clear_bit(ST_DOSIGS, &portp->state);
- memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &portp->asig,
- sizeof(asysigs_t));
- writel(0, &cp->status);
- writel(cmd, &cp->cmd);
- set_bit(ST_CMDING, &portp->state);
- } else if (test_bit(ST_DOFLUSHTX, &portp->state) ||
- test_bit(ST_DOFLUSHRX, &portp->state)) {
- cmd = ((test_bit(ST_DOFLUSHTX, &portp->state)) ? FLUSHTX : 0);
- cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0);
- clear_bit(ST_DOFLUSHTX, &portp->state);
- clear_bit(ST_DOFLUSHRX, &portp->state);
- memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &cmd, sizeof(int));
- writel(0, &cp->status);
- writel(A_FLUSH, &cp->cmd);
- set_bit(ST_CMDING, &portp->state);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Host command service checking. This handles commands or messages
- * coming from the slave to the host. Must have board shared memory
- * enabled and interrupts off when called. Notice that by servicing the
- * read data last we don't need to change the shared memory pointer
- * during processing (which is a slow IO operation).
- * Return value indicates if this port is still awaiting actions from
- * the slave (like open, command, or even TX data being sent). If 0
- * then port is still busy, otherwise no longer busy.
- */
-
-static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp)
-{
- cdkasy_t __iomem *ap;
- cdkctrl_t __iomem *cp;
- struct tty_struct *tty;
- asynotify_t nt;
- unsigned long oldsigs;
- int rc, donerx;
-
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- cp = &ap->ctrl;
-
-/*
- * Check if we are waiting for an open completion message.
- */
- if (test_bit(ST_OPENING, &portp->state)) {
- rc = readl(&cp->openarg);
- if (readb(&cp->open) == 0 && rc != 0) {
- if (rc > 0)
- rc--;
- writel(0, &cp->openarg);
- portp->rc = rc;
- clear_bit(ST_OPENING, &portp->state);
- wake_up_interruptible(&portp->raw_wait);
- }
- }
-
-/*
- * Check if we are waiting for a close completion message.
- */
- if (test_bit(ST_CLOSING, &portp->state)) {
- rc = (int) readl(&cp->closearg);
- if (readb(&cp->close) == 0 && rc != 0) {
- if (rc > 0)
- rc--;
- writel(0, &cp->closearg);
- portp->rc = rc;
- clear_bit(ST_CLOSING, &portp->state);
- wake_up_interruptible(&portp->raw_wait);
- }
- }
-
-/*
- * Check if we are waiting for a command completion message. We may
- * need to copy out the command results associated with this command.
- */
- if (test_bit(ST_CMDING, &portp->state)) {
- rc = readl(&cp->status);
- if (readl(&cp->cmd) == 0 && rc != 0) {
- if (rc > 0)
- rc--;
- if (portp->argp != NULL) {
- memcpy_fromio(portp->argp, (void __iomem *) &(cp->args[0]),
- portp->argsize);
- portp->argp = NULL;
- }
- writel(0, &cp->status);
- portp->rc = rc;
- clear_bit(ST_CMDING, &portp->state);
- stli_dodelaycmd(portp, cp);
- wake_up_interruptible(&portp->raw_wait);
- }
- }
-
-/*
- * Check for any notification messages ready. This includes lots of
- * different types of events - RX chars ready, RX break received,
- * TX data low or empty in the slave, modem signals changed state.
- */
- donerx = 0;
-
- if (ap->notify) {
- nt = ap->changed;
- ap->notify = 0;
- tty = tty_port_tty_get(&portp->port);
-
- if (nt.signal & SG_DCD) {
- oldsigs = portp->sigs;
- portp->sigs = stli_mktiocm(nt.sigvalue);
- clear_bit(ST_GETSIGS, &portp->state);
- if ((portp->sigs & TIOCM_CD) &&
- ((oldsigs & TIOCM_CD) == 0))
- wake_up_interruptible(&portp->port.open_wait);
- if ((oldsigs & TIOCM_CD) &&
- ((portp->sigs & TIOCM_CD) == 0)) {
- if (portp->port.flags & ASYNC_CHECK_CD) {
- if (tty)
- tty_hangup(tty);
- }
- }
- }
-
- if (nt.data & DT_TXEMPTY)
- clear_bit(ST_TXBUSY, &portp->state);
- if (nt.data & (DT_TXEMPTY | DT_TXLOW)) {
- if (tty != NULL) {
- tty_wakeup(tty);
- EBRDENABLE(brdp);
- }
- }
-
- if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
- if (tty != NULL) {
- tty_insert_flip_char(tty, 0, TTY_BREAK);
- if (portp->port.flags & ASYNC_SAK) {
- do_SAK(tty);
- EBRDENABLE(brdp);
- }
- tty_schedule_flip(tty);
- }
- }
- tty_kref_put(tty);
-
- if (nt.data & DT_RXBUSY) {
- donerx++;
- stli_read(brdp, portp);
- }
- }
-
-/*
- * It might seem odd that we are checking for more RX chars here.
- * But, we need to handle the case where the tty buffer was previously
- * filled, but we had more characters to pass up. The slave will not
- * send any more RX notify messages until the RX buffer has been emptied.
- * But it will leave the service bits on (since the buffer is not empty).
- * So from here we can try to process more RX chars.
- */
- if ((!donerx) && test_bit(ST_RXING, &portp->state)) {
- clear_bit(ST_RXING, &portp->state);
- stli_read(brdp, portp);
- }
-
- return((test_bit(ST_OPENING, &portp->state) ||
- test_bit(ST_CLOSING, &portp->state) ||
- test_bit(ST_CMDING, &portp->state) ||
- test_bit(ST_TXBUSY, &portp->state) ||
- test_bit(ST_RXING, &portp->state)) ? 0 : 1);
-}
-
-/*****************************************************************************/
-
-/*
- * Service all ports on a particular board. Assumes that the boards
- * shared memory is enabled, and that the page pointer is pointed
- * at the cdk header structure.
- */
-
-static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp)
-{
- struct stliport *portp;
- unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
- unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
- unsigned char __iomem *slavep;
- int bitpos, bitat, bitsize;
- int channr, nrdevs, slavebitchange;
-
- bitsize = brdp->bitsize;
- nrdevs = brdp->nrdevs;
-
-/*
- * Check if slave wants any service. Basically we try to do as
- * little work as possible here. There are 2 levels of service
- * bits. So if there is nothing to do we bail early. We check
- * 8 service bits at a time in the inner loop, so we can bypass
- * the lot if none of them want service.
- */
- memcpy_fromio(&hostbits[0], (((unsigned char __iomem *) hdrp) + brdp->hostoffset),
- bitsize);
-
- memset(&slavebits[0], 0, bitsize);
- slavebitchange = 0;
-
- for (bitpos = 0; (bitpos < bitsize); bitpos++) {
- if (hostbits[bitpos] == 0)
- continue;
- channr = bitpos * 8;
- for (bitat = 0x1; (channr < nrdevs); channr++, bitat <<= 1) {
- if (hostbits[bitpos] & bitat) {
- portp = brdp->ports[(channr - 1)];
- if (stli_hostcmd(brdp, portp)) {
- slavebitchange++;
- slavebits[bitpos] |= bitat;
- }
- }
- }
- }
-
-/*
- * If any of the ports are no longer busy then update them in the
- * slave request bits. We need to do this after, since a host port
- * service may initiate more slave requests.
- */
- if (slavebitchange) {
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- slavep = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset;
- for (bitpos = 0; (bitpos < bitsize); bitpos++) {
- if (readb(slavebits + bitpos))
- writeb(readb(slavep + bitpos) & ~slavebits[bitpos], slavebits + bitpos);
- }
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Driver poll routine. This routine polls the boards in use and passes
- * messages back up to host when necessary. This is actually very
- * CPU efficient, since we will always have the kernel poll clock, it
- * adds only a few cycles when idle (since board service can be
- * determined very easily), but when loaded generates no interrupts
- * (with their expensive associated context change).
- */
-
-static void stli_poll(unsigned long arg)
-{
- cdkhdr_t __iomem *hdrp;
- struct stlibrd *brdp;
- unsigned int brdnr;
-
- mod_timer(&stli_timerlist, STLI_TIMEOUT);
-
-/*
- * Check each board and do any servicing required.
- */
- for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- continue;
- if (!test_bit(BST_STARTED, &brdp->state))
- continue;
-
- spin_lock(&brd_lock);
- EBRDENABLE(brdp);
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- if (readb(&hdrp->hostreq))
- stli_brdpoll(brdp, hdrp);
- EBRDDISABLE(brdp);
- spin_unlock(&brd_lock);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Translate the termios settings into the port setting structure of
- * the slave.
- */
-
-static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp,
- asyport_t *pp, struct ktermios *tiosp)
-{
- memset(pp, 0, sizeof(asyport_t));
-
-/*
- * Start of by setting the baud, char size, parity and stop bit info.
- */
- pp->baudout = tty_get_baud_rate(tty);
- if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- pp->baudout = 57600;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- pp->baudout = 115200;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- pp->baudout = 230400;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- pp->baudout = 460800;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
- pp->baudout = (portp->baud_base / portp->custom_divisor);
- }
- if (pp->baudout > STL_MAXBAUD)
- pp->baudout = STL_MAXBAUD;
- pp->baudin = pp->baudout;
-
- switch (tiosp->c_cflag & CSIZE) {
- case CS5:
- pp->csize = 5;
- break;
- case CS6:
- pp->csize = 6;
- break;
- case CS7:
- pp->csize = 7;
- break;
- default:
- pp->csize = 8;
- break;
- }
-
- if (tiosp->c_cflag & CSTOPB)
- pp->stopbs = PT_STOP2;
- else
- pp->stopbs = PT_STOP1;
-
- if (tiosp->c_cflag & PARENB) {
- if (tiosp->c_cflag & PARODD)
- pp->parity = PT_ODDPARITY;
- else
- pp->parity = PT_EVENPARITY;
- } else {
- pp->parity = PT_NOPARITY;
- }
-
-/*
- * Set up any flow control options enabled.
- */
- if (tiosp->c_iflag & IXON) {
- pp->flow |= F_IXON;
- if (tiosp->c_iflag & IXANY)
- pp->flow |= F_IXANY;
- }
- if (tiosp->c_cflag & CRTSCTS)
- pp->flow |= (F_RTSFLOW | F_CTSFLOW);
-
- pp->startin = tiosp->c_cc[VSTART];
- pp->stopin = tiosp->c_cc[VSTOP];
- pp->startout = tiosp->c_cc[VSTART];
- pp->stopout = tiosp->c_cc[VSTOP];
-
-/*
- * Set up the RX char marking mask with those RX error types we must
- * catch. We can get the slave to help us out a little here, it will
- * ignore parity errors and breaks for us, and mark parity errors in
- * the data stream.
- */
- if (tiosp->c_iflag & IGNPAR)
- pp->iflag |= FI_IGNRXERRS;
- if (tiosp->c_iflag & IGNBRK)
- pp->iflag |= FI_IGNBREAK;
-
- portp->rxmarkmsk = 0;
- if (tiosp->c_iflag & (INPCK | PARMRK))
- pp->iflag |= FI_1MARKRXERRS;
- if (tiosp->c_iflag & BRKINT)
- portp->rxmarkmsk |= BRKINT;
-
-/*
- * Set up clocal processing as required.
- */
- if (tiosp->c_cflag & CLOCAL)
- portp->port.flags &= ~ASYNC_CHECK_CD;
- else
- portp->port.flags |= ASYNC_CHECK_CD;
-
-/*
- * Transfer any persistent flags into the asyport structure.
- */
- pp->pflag = (portp->pflag & 0xffff);
- pp->vmin = (portp->pflag & P_RXIMIN) ? 1 : 0;
- pp->vtime = (portp->pflag & P_RXITIME) ? 1 : 0;
- pp->cc[1] = (portp->pflag & P_RXTHOLD) ? 1 : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Construct a slave signals structure for setting the DTR and RTS
- * signals as specified.
- */
-
-static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts)
-{
- memset(sp, 0, sizeof(asysigs_t));
- if (dtr >= 0) {
- sp->signal |= SG_DTR;
- sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0);
- }
- if (rts >= 0) {
- sp->signal |= SG_RTS;
- sp->sigvalue |= ((rts > 0) ? SG_RTS : 0);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Convert the signals returned from the slave into a local TIOCM type
- * signals value. We keep them locally in TIOCM format.
- */
-
-static long stli_mktiocm(unsigned long sigvalue)
-{
- long tiocm = 0;
- tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0);
- tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0);
- tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0);
- tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0);
- tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0);
- tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0);
- return(tiocm);
-}
-
-/*****************************************************************************/
-
-/*
- * All panels and ports actually attached have been worked out. All
- * we need to do here is set up the appropriate per port data structures.
- */
-
-static int stli_initports(struct stlibrd *brdp)
-{
- struct stliport *portp;
- unsigned int i, panelnr, panelport;
-
- for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
- if (!portp) {
- printk(KERN_WARNING "istallion: failed to allocate port structure\n");
- continue;
- }
- tty_port_init(&portp->port);
- portp->port.ops = &stli_port_ops;
- portp->magic = STLI_PORTMAGIC;
- portp->portnr = i;
- portp->brdnr = brdp->brdnr;
- portp->panelnr = panelnr;
- portp->baud_base = STL_BAUDBASE;
- portp->port.close_delay = STL_CLOSEDELAY;
- portp->closing_wait = 30 * HZ;
- init_waitqueue_head(&portp->port.open_wait);
- init_waitqueue_head(&portp->port.close_wait);
- init_waitqueue_head(&portp->raw_wait);
- panelport++;
- if (panelport >= brdp->panels[panelnr]) {
- panelport = 0;
- panelnr++;
- }
- brdp->ports[i] = portp;
- }
-
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * All the following routines are board specific hardware operations.
- */
-
-static void stli_ecpinit(struct stlibrd *brdp)
-{
- unsigned long memconf;
-
- outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
- udelay(10);
- outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
- udelay(100);
-
- memconf = (brdp->memaddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT;
- outb(memconf, (brdp->iobase + ECP_ATMEMAR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpenable(struct stlibrd *brdp)
-{
- outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpdisable(struct stlibrd *brdp)
-{
- outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % ECP_ATPAGESIZE);
- val = (unsigned char) (offset / ECP_ATPAGESIZE);
- }
- outb(val, (brdp->iobase + ECP_ATMEMPR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpreset(struct stlibrd *brdp)
-{
- outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
- udelay(10);
- outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
- udelay(500);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpintr(struct stlibrd *brdp)
-{
- outb(0x1, brdp->iobase);
-}
-
-/*****************************************************************************/
-
-/*
- * The following set of functions act on ECP EISA boards.
- */
-
-static void stli_ecpeiinit(struct stlibrd *brdp)
-{
- unsigned long memconf;
-
- outb(0x1, (brdp->iobase + ECP_EIBRDENAB));
- outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
- udelay(10);
- outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
- udelay(500);
-
- memconf = (brdp->memaddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL;
- outb(memconf, (brdp->iobase + ECP_EIMEMARL));
- memconf = (brdp->memaddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH;
- outb(memconf, (brdp->iobase + ECP_EIMEMARH));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeienable(struct stlibrd *brdp)
-{
- outb(ECP_EIENABLE, (brdp->iobase + ECP_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeidisable(struct stlibrd *brdp)
-{
- outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % ECP_EIPAGESIZE);
- if (offset < ECP_EIPAGESIZE)
- val = ECP_EIENABLE;
- else
- val = ECP_EIENABLE | 0x40;
- }
- outb(val, (brdp->iobase + ECP_EICONFR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpeireset(struct stlibrd *brdp)
-{
- outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
- udelay(10);
- outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
- udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- * The following set of functions act on ECP MCA boards.
- */
-
-static void stli_ecpmcenable(struct stlibrd *brdp)
-{
- outb(ECP_MCENABLE, (brdp->iobase + ECP_MCCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_ecpmcdisable(struct stlibrd *brdp)
-{
- outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % ECP_MCPAGESIZE);
- val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE;
- }
- outb(val, (brdp->iobase + ECP_MCCONFR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecpmcreset(struct stlibrd *brdp)
-{
- outb(ECP_MCSTOP, (brdp->iobase + ECP_MCCONFR));
- udelay(10);
- outb(ECP_MCDISABLE, (brdp->iobase + ECP_MCCONFR));
- udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- * The following set of functions act on ECP PCI boards.
- */
-
-static void stli_ecppciinit(struct stlibrd *brdp)
-{
- outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
- udelay(10);
- outb(0, (brdp->iobase + ECP_PCICONFR));
- udelay(500);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), board=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % ECP_PCIPAGESIZE);
- val = (offset / ECP_PCIPAGESIZE) << 1;
- }
- outb(val, (brdp->iobase + ECP_PCICONFR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_ecppcireset(struct stlibrd *brdp)
-{
- outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
- udelay(10);
- outb(0, (brdp->iobase + ECP_PCICONFR));
- udelay(500);
-}
-
-/*****************************************************************************/
-
-/*
- * The following routines act on ONboards.
- */
-
-static void stli_onbinit(struct stlibrd *brdp)
-{
- unsigned long memconf;
-
- outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
- udelay(10);
- outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
- mdelay(1000);
-
- memconf = (brdp->memaddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT;
- outb(memconf, (brdp->iobase + ONB_ATMEMAR));
- outb(0x1, brdp->iobase);
- mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void stli_onbenable(struct stlibrd *brdp)
-{
- outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_onbdisable(struct stlibrd *brdp)
-{
- outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- } else {
- ptr = brdp->membase + (offset % ONB_ATPAGESIZE);
- }
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_onbreset(struct stlibrd *brdp)
-{
- outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
- udelay(10);
- outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
- mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- * The following routines act on ONboard EISA.
- */
-
-static void stli_onbeinit(struct stlibrd *brdp)
-{
- unsigned long memconf;
-
- outb(0x1, (brdp->iobase + ONB_EIBRDENAB));
- outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
- udelay(10);
- outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
- mdelay(1000);
-
- memconf = (brdp->memaddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL;
- outb(memconf, (brdp->iobase + ONB_EIMEMARL));
- memconf = (brdp->memaddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH;
- outb(memconf, (brdp->iobase + ONB_EIMEMARH));
- outb(0x1, brdp->iobase);
- mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void stli_onbeenable(struct stlibrd *brdp)
-{
- outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void stli_onbedisable(struct stlibrd *brdp)
-{
- outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "istallion: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % ONB_EIPAGESIZE);
- if (offset < ONB_EIPAGESIZE)
- val = ONB_EIENABLE;
- else
- val = ONB_EIENABLE | 0x40;
- }
- outb(val, (brdp->iobase + ONB_EICONFR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_onbereset(struct stlibrd *brdp)
-{
- outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
- udelay(10);
- outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
- mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- * The following routines act on Brumby boards.
- */
-
-static void stli_bbyinit(struct stlibrd *brdp)
-{
- outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
- udelay(10);
- outb(0, (brdp->iobase + BBY_ATCONFR));
- mdelay(1000);
- outb(0x1, brdp->iobase);
- mdelay(1);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_bbygetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- void __iomem *ptr;
- unsigned char val;
-
- BUG_ON(offset > brdp->memsize);
-
- ptr = brdp->membase + (offset % BBY_PAGESIZE);
- val = (unsigned char) (offset / BBY_PAGESIZE);
- outb(val, (brdp->iobase + BBY_ATCONFR));
- return(ptr);
-}
-
-/*****************************************************************************/
-
-static void stli_bbyreset(struct stlibrd *brdp)
-{
- outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
- udelay(10);
- outb(0, (brdp->iobase + BBY_ATCONFR));
- mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- * The following routines act on original old Stallion boards.
- */
-
-static void stli_stalinit(struct stlibrd *brdp)
-{
- outb(0x1, brdp->iobase);
- mdelay(1000);
-}
-
-/*****************************************************************************/
-
-static void __iomem *stli_stalgetmemptr(struct stlibrd *brdp, unsigned long offset, int line)
-{
- BUG_ON(offset > brdp->memsize);
- return brdp->membase + (offset % STAL_PAGESIZE);
-}
-
-/*****************************************************************************/
-
-static void stli_stalreset(struct stlibrd *brdp)
-{
- u32 __iomem *vecp;
-
- vecp = (u32 __iomem *) (brdp->membase + 0x30);
- writel(0xffff0000, vecp);
- outb(0, brdp->iobase);
- mdelay(1000);
-}
-
-/*****************************************************************************/
-
-/*
- * Try to find an ECP board and initialize it. This handles only ECP
- * board types.
- */
-
-static int stli_initecp(struct stlibrd *brdp)
-{
- cdkecpsig_t sig;
- cdkecpsig_t __iomem *sigsp;
- unsigned int status, nxtid;
- char *name;
- int retval, panelnr, nrports;
-
- if ((brdp->iobase == 0) || (brdp->memaddr == 0)) {
- retval = -ENODEV;
- goto err;
- }
-
- brdp->iosize = ECP_IOSIZE;
-
- if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
- retval = -EIO;
- goto err;
- }
-
-/*
- * Based on the specific board type setup the common vars to access
- * and enable shared memory. Set all board specific information now
- * as well.
- */
- switch (brdp->brdtype) {
- case BRD_ECP:
- brdp->memsize = ECP_MEMSIZE;
- brdp->pagesize = ECP_ATPAGESIZE;
- brdp->init = stli_ecpinit;
- brdp->enable = stli_ecpenable;
- brdp->reenable = stli_ecpenable;
- brdp->disable = stli_ecpdisable;
- brdp->getmemptr = stli_ecpgetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_ecpreset;
- name = "serial(EC8/64)";
- break;
-
- case BRD_ECPE:
- brdp->memsize = ECP_MEMSIZE;
- brdp->pagesize = ECP_EIPAGESIZE;
- brdp->init = stli_ecpeiinit;
- brdp->enable = stli_ecpeienable;
- brdp->reenable = stli_ecpeienable;
- brdp->disable = stli_ecpeidisable;
- brdp->getmemptr = stli_ecpeigetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_ecpeireset;
- name = "serial(EC8/64-EI)";
- break;
-
- case BRD_ECPMC:
- brdp->memsize = ECP_MEMSIZE;
- brdp->pagesize = ECP_MCPAGESIZE;
- brdp->init = NULL;
- brdp->enable = stli_ecpmcenable;
- brdp->reenable = stli_ecpmcenable;
- brdp->disable = stli_ecpmcdisable;
- brdp->getmemptr = stli_ecpmcgetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_ecpmcreset;
- name = "serial(EC8/64-MCA)";
- break;
-
- case BRD_ECPPCI:
- brdp->memsize = ECP_PCIMEMSIZE;
- brdp->pagesize = ECP_PCIPAGESIZE;
- brdp->init = stli_ecppciinit;
- brdp->enable = NULL;
- brdp->reenable = NULL;
- brdp->disable = NULL;
- brdp->getmemptr = stli_ecppcigetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_ecppcireset;
- name = "serial(EC/RA-PCI)";
- break;
-
- default:
- retval = -EINVAL;
- goto err_reg;
- }
-
-/*
- * The per-board operations structure is all set up, so now let's go
- * and get the board operational. Firstly initialize board configuration
- * registers. Set the memory mapping info so we can get at the boards
- * shared memory.
- */
- EBRDINIT(brdp);
-
- brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
- if (brdp->membase == NULL) {
- retval = -ENOMEM;
- goto err_reg;
- }
-
-/*
- * Now that all specific code is set up, enable the shared memory and
- * look for the a signature area that will tell us exactly what board
- * this is, and what it is connected to it.
- */
- EBRDENABLE(brdp);
- sigsp = (cdkecpsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
- memcpy_fromio(&sig, sigsp, sizeof(cdkecpsig_t));
- EBRDDISABLE(brdp);
-
- if (sig.magic != cpu_to_le32(ECP_MAGIC)) {
- retval = -ENODEV;
- goto err_unmap;
- }
-
-/*
- * Scan through the signature looking at the panels connected to the
- * board. Calculate the total number of ports as we go.
- */
- for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) {
- status = sig.panelid[nxtid];
- if ((status & ECH_PNLIDMASK) != nxtid)
- break;
-
- brdp->panelids[panelnr] = status;
- nrports = (status & ECH_PNL16PORT) ? 16 : 8;
- if ((nrports == 16) && ((status & ECH_PNLXPID) == 0))
- nxtid++;
- brdp->panels[panelnr] = nrports;
- brdp->nrports += nrports;
- nxtid++;
- brdp->nrpanels++;
- }
-
-
- set_bit(BST_FOUND, &brdp->state);
- return 0;
-err_unmap:
- iounmap(brdp->membase);
- brdp->membase = NULL;
-err_reg:
- release_region(brdp->iobase, brdp->iosize);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Try to find an ONboard, Brumby or Stallion board and initialize it.
- * This handles only these board types.
- */
-
-static int stli_initonb(struct stlibrd *brdp)
-{
- cdkonbsig_t sig;
- cdkonbsig_t __iomem *sigsp;
- char *name;
- int i, retval;
-
-/*
- * Do a basic sanity check on the IO and memory addresses.
- */
- if (brdp->iobase == 0 || brdp->memaddr == 0) {
- retval = -ENODEV;
- goto err;
- }
-
- brdp->iosize = ONB_IOSIZE;
-
- if (!request_region(brdp->iobase, brdp->iosize, "istallion")) {
- retval = -EIO;
- goto err;
- }
-
-/*
- * Based on the specific board type setup the common vars to access
- * and enable shared memory. Set all board specific information now
- * as well.
- */
- switch (brdp->brdtype) {
- case BRD_ONBOARD:
- case BRD_ONBOARD2:
- brdp->memsize = ONB_MEMSIZE;
- brdp->pagesize = ONB_ATPAGESIZE;
- brdp->init = stli_onbinit;
- brdp->enable = stli_onbenable;
- brdp->reenable = stli_onbenable;
- brdp->disable = stli_onbdisable;
- brdp->getmemptr = stli_onbgetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_onbreset;
- if (brdp->memaddr > 0x100000)
- brdp->enabval = ONB_MEMENABHI;
- else
- brdp->enabval = ONB_MEMENABLO;
- name = "serial(ONBoard)";
- break;
-
- case BRD_ONBOARDE:
- brdp->memsize = ONB_EIMEMSIZE;
- brdp->pagesize = ONB_EIPAGESIZE;
- brdp->init = stli_onbeinit;
- brdp->enable = stli_onbeenable;
- brdp->reenable = stli_onbeenable;
- brdp->disable = stli_onbedisable;
- brdp->getmemptr = stli_onbegetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_onbereset;
- name = "serial(ONBoard/E)";
- break;
-
- case BRD_BRUMBY4:
- brdp->memsize = BBY_MEMSIZE;
- brdp->pagesize = BBY_PAGESIZE;
- brdp->init = stli_bbyinit;
- brdp->enable = NULL;
- brdp->reenable = NULL;
- brdp->disable = NULL;
- brdp->getmemptr = stli_bbygetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_bbyreset;
- name = "serial(Brumby)";
- break;
-
- case BRD_STALLION:
- brdp->memsize = STAL_MEMSIZE;
- brdp->pagesize = STAL_PAGESIZE;
- brdp->init = stli_stalinit;
- brdp->enable = NULL;
- brdp->reenable = NULL;
- brdp->disable = NULL;
- brdp->getmemptr = stli_stalgetmemptr;
- brdp->intr = stli_ecpintr;
- brdp->reset = stli_stalreset;
- name = "serial(Stallion)";
- break;
-
- default:
- retval = -EINVAL;
- goto err_reg;
- }
-
-/*
- * The per-board operations structure is all set up, so now let's go
- * and get the board operational. Firstly initialize board configuration
- * registers. Set the memory mapping info so we can get at the boards
- * shared memory.
- */
- EBRDINIT(brdp);
-
- brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
- if (brdp->membase == NULL) {
- retval = -ENOMEM;
- goto err_reg;
- }
-
-/*
- * Now that all specific code is set up, enable the shared memory and
- * look for the a signature area that will tell us exactly what board
- * this is, and how many ports.
- */
- EBRDENABLE(brdp);
- sigsp = (cdkonbsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
- memcpy_fromio(&sig, sigsp, sizeof(cdkonbsig_t));
- EBRDDISABLE(brdp);
-
- if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) ||
- sig.magic1 != cpu_to_le16(ONB_MAGIC1) ||
- sig.magic2 != cpu_to_le16(ONB_MAGIC2) ||
- sig.magic3 != cpu_to_le16(ONB_MAGIC3)) {
- retval = -ENODEV;
- goto err_unmap;
- }
-
-/*
- * Scan through the signature alive mask and calculate how many ports
- * there are on this board.
- */
- brdp->nrpanels = 1;
- if (sig.amask1) {
- brdp->nrports = 32;
- } else {
- for (i = 0; (i < 16); i++) {
- if (((sig.amask0 << i) & 0x8000) == 0)
- break;
- }
- brdp->nrports = i;
- }
- brdp->panels[0] = brdp->nrports;
-
-
- set_bit(BST_FOUND, &brdp->state);
- return 0;
-err_unmap:
- iounmap(brdp->membase);
- brdp->membase = NULL;
-err_reg:
- release_region(brdp->iobase, brdp->iosize);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Start up a running board. This routine is only called after the
- * code has been down loaded to the board and is operational. It will
- * read in the memory map, and get the show on the road...
- */
-
-static int stli_startbrd(struct stlibrd *brdp)
-{
- cdkhdr_t __iomem *hdrp;
- cdkmem_t __iomem *memp;
- cdkasy_t __iomem *ap;
- unsigned long flags;
- unsigned int portnr, nrdevs, i;
- struct stliport *portp;
- int rc = 0;
- u32 memoff;
-
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- nrdevs = hdrp->nrdevs;
-
-#if 0
- printk("%s(%d): CDK version %d.%d.%d --> "
- "nrdevs=%d memp=%x hostp=%x slavep=%x\n",
- __FILE__, __LINE__, readb(&hdrp->ver_release), readb(&hdrp->ver_modification),
- readb(&hdrp->ver_fix), nrdevs, (int) readl(&hdrp->memp), readl(&hdrp->hostp),
- readl(&hdrp->slavep));
-#endif
-
- if (nrdevs < (brdp->nrports + 1)) {
- printk(KERN_ERR "istallion: slave failed to allocate memory for "
- "all devices, devices=%d\n", nrdevs);
- brdp->nrports = nrdevs - 1;
- }
- brdp->nrdevs = nrdevs;
- brdp->hostoffset = hdrp->hostp - CDK_CDKADDR;
- brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR;
- brdp->bitsize = (nrdevs + 7) / 8;
- memoff = readl(&hdrp->memp);
- if (memoff > brdp->memsize) {
- printk(KERN_ERR "istallion: corrupted shared memory region?\n");
- rc = -EIO;
- goto stli_donestartup;
- }
- memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
- if (readw(&memp->dtype) != TYP_ASYNCTRL) {
- printk(KERN_ERR "istallion: no slave control device found\n");
- goto stli_donestartup;
- }
- memp++;
-
-/*
- * Cycle through memory allocation of each port. We are guaranteed to
- * have all ports inside the first page of slave window, so no need to
- * change pages while reading memory map.
- */
- for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) {
- if (readw(&memp->dtype) != TYP_ASYNC)
- break;
- portp = brdp->ports[portnr];
- if (portp == NULL)
- break;
- portp->devnr = i;
- portp->addr = readl(&memp->offset);
- portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs));
- portp->portidx = (unsigned char) (i / 8);
- portp->portbit = (unsigned char) (0x1 << (i % 8));
- }
-
- writeb(0xff, &hdrp->slavereq);
-
-/*
- * For each port setup a local copy of the RX and TX buffer offsets
- * and sizes. We do this separate from the above, because we need to
- * move the shared memory page...
- */
- for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) {
- portp = brdp->ports[portnr];
- if (portp == NULL)
- break;
- if (portp->addr == 0)
- break;
- ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
- if (ap != NULL) {
- portp->rxsize = readw(&ap->rxq.size);
- portp->txsize = readw(&ap->txq.size);
- portp->rxoffset = readl(&ap->rxq.offset);
- portp->txoffset = readl(&ap->txq.offset);
- }
- }
-
-stli_donestartup:
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- if (rc == 0)
- set_bit(BST_STARTED, &brdp->state);
-
- if (! stli_timeron) {
- stli_timeron++;
- mod_timer(&stli_timerlist, STLI_TIMEOUT);
- }
-
- return rc;
-}
-
-/*****************************************************************************/
-
-/*
- * Probe and initialize the specified board.
- */
-
-static int __devinit stli_brdinit(struct stlibrd *brdp)
-{
- int retval;
-
- switch (brdp->brdtype) {
- case BRD_ECP:
- case BRD_ECPE:
- case BRD_ECPMC:
- case BRD_ECPPCI:
- retval = stli_initecp(brdp);
- break;
- case BRD_ONBOARD:
- case BRD_ONBOARDE:
- case BRD_ONBOARD2:
- case BRD_BRUMBY4:
- case BRD_STALLION:
- retval = stli_initonb(brdp);
- break;
- default:
- printk(KERN_ERR "istallion: board=%d is unknown board "
- "type=%d\n", brdp->brdnr, brdp->brdtype);
- retval = -ENODEV;
- }
-
- if (retval)
- return retval;
-
- stli_initports(brdp);
- printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
- "nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
- brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
- brdp->nrpanels, brdp->nrports);
- return 0;
-}
-
-#if STLI_EISAPROBE != 0
-/*****************************************************************************/
-
-/*
- * Probe around trying to find where the EISA boards shared memory
- * might be. This is a bit if hack, but it is the best we can do.
- */
-
-static int stli_eisamemprobe(struct stlibrd *brdp)
-{
- cdkecpsig_t ecpsig, __iomem *ecpsigp;
- cdkonbsig_t onbsig, __iomem *onbsigp;
- int i, foundit;
-
-/*
- * First up we reset the board, to get it into a known state. There
- * is only 2 board types here we need to worry about. Don;t use the
- * standard board init routine here, it programs up the shared
- * memory address, and we don't know it yet...
- */
- if (brdp->brdtype == BRD_ECPE) {
- outb(0x1, (brdp->iobase + ECP_EIBRDENAB));
- outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
- udelay(10);
- outb(ECP_EIDISABLE, (brdp->iobase + ECP_EICONFR));
- udelay(500);
- stli_ecpeienable(brdp);
- } else if (brdp->brdtype == BRD_ONBOARDE) {
- outb(0x1, (brdp->iobase + ONB_EIBRDENAB));
- outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
- udelay(10);
- outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
- mdelay(100);
- outb(0x1, brdp->iobase);
- mdelay(1);
- stli_onbeenable(brdp);
- } else {
- return -ENODEV;
- }
-
- foundit = 0;
- brdp->memsize = ECP_MEMSIZE;
-
-/*
- * Board shared memory is enabled, so now we have a poke around and
- * see if we can find it.
- */
- for (i = 0; (i < stli_eisamempsize); i++) {
- brdp->memaddr = stli_eisamemprobeaddrs[i];
- brdp->membase = ioremap_nocache(brdp->memaddr, brdp->memsize);
- if (brdp->membase == NULL)
- continue;
-
- if (brdp->brdtype == BRD_ECPE) {
- ecpsigp = stli_ecpeigetmemptr(brdp,
- CDK_SIGADDR, __LINE__);
- memcpy_fromio(&ecpsig, ecpsigp, sizeof(cdkecpsig_t));
- if (ecpsig.magic == cpu_to_le32(ECP_MAGIC))
- foundit = 1;
- } else {
- onbsigp = (cdkonbsig_t __iomem *) stli_onbegetmemptr(brdp,
- CDK_SIGADDR, __LINE__);
- memcpy_fromio(&onbsig, onbsigp, sizeof(cdkonbsig_t));
- if ((onbsig.magic0 == cpu_to_le16(ONB_MAGIC0)) &&
- (onbsig.magic1 == cpu_to_le16(ONB_MAGIC1)) &&
- (onbsig.magic2 == cpu_to_le16(ONB_MAGIC2)) &&
- (onbsig.magic3 == cpu_to_le16(ONB_MAGIC3)))
- foundit = 1;
- }
-
- iounmap(brdp->membase);
- if (foundit)
- break;
- }
-
-/*
- * Regardless of whether we found the shared memory or not we must
- * disable the region. After that return success or failure.
- */
- if (brdp->brdtype == BRD_ECPE)
- stli_ecpeidisable(brdp);
- else
- stli_onbedisable(brdp);
-
- if (! foundit) {
- brdp->memaddr = 0;
- brdp->membase = NULL;
- printk(KERN_ERR "istallion: failed to probe shared memory "
- "region for %s in EISA slot=%d\n",
- stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
- return -ENODEV;
- }
- return 0;
-}
-#endif
-
-static int stli_getbrdnr(void)
-{
- unsigned int i;
-
- for (i = 0; i < STL_MAXBRDS; i++) {
- if (!stli_brds[i]) {
- if (i >= stli_nrbrds)
- stli_nrbrds = i + 1;
- return i;
- }
- }
- return -1;
-}
-
-#if STLI_EISAPROBE != 0
-/*****************************************************************************/
-
-/*
- * Probe around and try to find any EISA boards in system. The biggest
- * problem here is finding out what memory address is associated with
- * an EISA board after it is found. The registers of the ECPE and
- * ONboardE are not readable - so we can't read them from there. We
- * don't have access to the EISA CMOS (or EISA BIOS) so we don't
- * actually have any way to find out the real value. The best we can
- * do is go probing around in the usual places hoping we can find it.
- */
-
-static int __init stli_findeisabrds(void)
-{
- struct stlibrd *brdp;
- unsigned int iobase, eid, i;
- int brdnr, found = 0;
-
-/*
- * Firstly check if this is an EISA system. If this is not an EISA system then
- * don't bother going any further!
- */
- if (EISA_bus)
- return 0;
-
-/*
- * Looks like an EISA system, so go searching for EISA boards.
- */
- for (iobase = 0x1000; (iobase <= 0xc000); iobase += 0x1000) {
- outb(0xff, (iobase + 0xc80));
- eid = inb(iobase + 0xc80);
- eid |= inb(iobase + 0xc81) << 8;
- if (eid != STL_EISAID)
- continue;
-
-/*
- * We have found a board. Need to check if this board was
- * statically configured already (just in case!).
- */
- for (i = 0; (i < STL_MAXBRDS); i++) {
- brdp = stli_brds[i];
- if (brdp == NULL)
- continue;
- if (brdp->iobase == iobase)
- break;
- }
- if (i < STL_MAXBRDS)
- continue;
-
-/*
- * We have found a Stallion board and it is not configured already.
- * Allocate a board structure and initialize it.
- */
- if ((brdp = stli_allocbrd()) == NULL)
- return found ? : -ENOMEM;
- brdnr = stli_getbrdnr();
- if (brdnr < 0)
- return found ? : -ENOMEM;
- brdp->brdnr = (unsigned int)brdnr;
- eid = inb(iobase + 0xc82);
- if (eid == ECP_EISAID)
- brdp->brdtype = BRD_ECPE;
- else if (eid == ONB_EISAID)
- brdp->brdtype = BRD_ONBOARDE;
- else
- brdp->brdtype = BRD_UNKNOWN;
- brdp->iobase = iobase;
- outb(0x1, (iobase + 0xc84));
- if (stli_eisamemprobe(brdp))
- outb(0, (iobase + 0xc84));
- if (stli_brdinit(brdp) < 0) {
- kfree(brdp);
- continue;
- }
-
- stli_brds[brdp->brdnr] = brdp;
- found++;
-
- for (i = 0; i < brdp->nrports; i++)
- tty_register_device(stli_serial,
- brdp->brdnr * STL_MAXPORTS + i, NULL);
- }
-
- return found;
-}
-#else
-static inline int stli_findeisabrds(void) { return 0; }
-#endif
-
-/*****************************************************************************/
-
-/*
- * Find the next available board number that is free.
- */
-
-/*****************************************************************************/
-
-/*
- * We have a Stallion board. Allocate a board structure and
- * initialize it. Read its IO and MEMORY resources from PCI
- * configuration space.
- */
-
-static int __devinit stli_pciprobe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct stlibrd *brdp;
- unsigned int i;
- int brdnr, retval = -EIO;
-
- retval = pci_enable_device(pdev);
- if (retval)
- goto err;
- brdp = stli_allocbrd();
- if (brdp == NULL) {
- retval = -ENOMEM;
- goto err;
- }
- mutex_lock(&stli_brdslock);
- brdnr = stli_getbrdnr();
- if (brdnr < 0) {
- printk(KERN_INFO "istallion: too many boards found, "
- "maximum supported %d\n", STL_MAXBRDS);
- mutex_unlock(&stli_brdslock);
- retval = -EIO;
- goto err_fr;
- }
- brdp->brdnr = (unsigned int)brdnr;
- stli_brds[brdp->brdnr] = brdp;
- mutex_unlock(&stli_brdslock);
- brdp->brdtype = BRD_ECPPCI;
-/*
- * We have all resources from the board, so lets setup the actual
- * board structure now.
- */
- brdp->iobase = pci_resource_start(pdev, 3);
- brdp->memaddr = pci_resource_start(pdev, 2);
- retval = stli_brdinit(brdp);
- if (retval)
- goto err_null;
-
- set_bit(BST_PROBED, &brdp->state);
- pci_set_drvdata(pdev, brdp);
-
- EBRDENABLE(brdp);
- brdp->enable = NULL;
- brdp->disable = NULL;
-
- for (i = 0; i < brdp->nrports; i++)
- tty_register_device(stli_serial, brdp->brdnr * STL_MAXPORTS + i,
- &pdev->dev);
-
- return 0;
-err_null:
- stli_brds[brdp->brdnr] = NULL;
-err_fr:
- kfree(brdp);
-err:
- return retval;
-}
-
-static void __devexit stli_pciremove(struct pci_dev *pdev)
-{
- struct stlibrd *brdp = pci_get_drvdata(pdev);
-
- stli_cleanup_ports(brdp);
-
- iounmap(brdp->membase);
- if (brdp->iosize > 0)
- release_region(brdp->iobase, brdp->iosize);
-
- stli_brds[brdp->brdnr] = NULL;
- kfree(brdp);
-}
-
-static struct pci_driver stli_pcidriver = {
- .name = "istallion",
- .id_table = istallion_pci_tbl,
- .probe = stli_pciprobe,
- .remove = __devexit_p(stli_pciremove)
-};
-/*****************************************************************************/
-
-/*
- * Allocate a new board structure. Fill out the basic info in it.
- */
-
-static struct stlibrd *stli_allocbrd(void)
-{
- struct stlibrd *brdp;
-
- brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
- if (!brdp) {
- printk(KERN_ERR "istallion: failed to allocate memory "
- "(size=%Zd)\n", sizeof(struct stlibrd));
- return NULL;
- }
- brdp->magic = STLI_BOARDMAGIC;
- return brdp;
-}
-
-/*****************************************************************************/
-
-/*
- * Scan through all the boards in the configuration and see what we
- * can find.
- */
-
-static int __init stli_initbrds(void)
-{
- struct stlibrd *brdp, *nxtbrdp;
- struct stlconf conf;
- unsigned int i, j, found = 0;
- int retval;
-
- for (stli_nrbrds = 0; stli_nrbrds < ARRAY_SIZE(stli_brdsp);
- stli_nrbrds++) {
- memset(&conf, 0, sizeof(conf));
- if (stli_parsebrd(&conf, stli_brdsp[stli_nrbrds]) == 0)
- continue;
- if ((brdp = stli_allocbrd()) == NULL)
- continue;
- brdp->brdnr = stli_nrbrds;
- brdp->brdtype = conf.brdtype;
- brdp->iobase = conf.ioaddr1;
- brdp->memaddr = conf.memaddr;
- if (stli_brdinit(brdp) < 0) {
- kfree(brdp);
- continue;
- }
- stli_brds[brdp->brdnr] = brdp;
- found++;
-
- for (i = 0; i < brdp->nrports; i++)
- tty_register_device(stli_serial,
- brdp->brdnr * STL_MAXPORTS + i, NULL);
- }
-
- retval = stli_findeisabrds();
- if (retval > 0)
- found += retval;
-
-/*
- * All found boards are initialized. Now for a little optimization, if
- * no boards are sharing the "shared memory" regions then we can just
- * leave them all enabled. This is in fact the usual case.
- */
- stli_shared = 0;
- if (stli_nrbrds > 1) {
- for (i = 0; (i < stli_nrbrds); i++) {
- brdp = stli_brds[i];
- if (brdp == NULL)
- continue;
- for (j = i + 1; (j < stli_nrbrds); j++) {
- nxtbrdp = stli_brds[j];
- if (nxtbrdp == NULL)
- continue;
- if ((brdp->membase >= nxtbrdp->membase) &&
- (brdp->membase <= (nxtbrdp->membase +
- nxtbrdp->memsize - 1))) {
- stli_shared++;
- break;
- }
- }
- }
- }
-
- if (stli_shared == 0) {
- for (i = 0; (i < stli_nrbrds); i++) {
- brdp = stli_brds[i];
- if (brdp == NULL)
- continue;
- if (test_bit(BST_FOUND, &brdp->state)) {
- EBRDENABLE(brdp);
- brdp->enable = NULL;
- brdp->disable = NULL;
- }
- }
- }
-
- retval = pci_register_driver(&stli_pcidriver);
- if (retval && found == 0) {
- printk(KERN_ERR "Neither isa nor eisa cards found nor pci "
- "driver can be registered!\n");
- goto err;
- }
-
- return 0;
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Code to handle an "staliomem" read operation. This device is the
- * contents of the board shared memory. It is used for down loading
- * the slave image (and debugging :-)
- */
-
-static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp)
-{
- unsigned long flags;
- void __iomem *memptr;
- struct stlibrd *brdp;
- unsigned int brdnr;
- int size, n;
- void *p;
- loff_t off = *offp;
-
- brdnr = iminor(fp->f_path.dentry->d_inode);
- if (brdnr >= stli_nrbrds)
- return -ENODEV;
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- return -ENODEV;
- if (brdp->state == 0)
- return -ENODEV;
- if (off >= brdp->memsize || off + count < off)
- return 0;
-
- size = min(count, (size_t)(brdp->memsize - off));
-
- /*
- * Copy the data a page at a time
- */
-
- p = (void *)__get_free_page(GFP_KERNEL);
- if(p == NULL)
- return -ENOMEM;
-
- while (size > 0) {
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- memptr = EBRDGETMEMPTR(brdp, off);
- n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
- n = min(n, (int)PAGE_SIZE);
- memcpy_fromio(p, memptr, n);
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
- if (copy_to_user(buf, p, n)) {
- count = -EFAULT;
- goto out;
- }
- off += n;
- buf += n;
- size -= n;
- }
-out:
- *offp = off;
- free_page((unsigned long)p);
- return count;
-}
-
-/*****************************************************************************/
-
-/*
- * Code to handle an "staliomem" write operation. This device is the
- * contents of the board shared memory. It is used for down loading
- * the slave image (and debugging :-)
- *
- * FIXME: copy under lock
- */
-
-static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp)
-{
- unsigned long flags;
- void __iomem *memptr;
- struct stlibrd *brdp;
- char __user *chbuf;
- unsigned int brdnr;
- int size, n;
- void *p;
- loff_t off = *offp;
-
- brdnr = iminor(fp->f_path.dentry->d_inode);
-
- if (brdnr >= stli_nrbrds)
- return -ENODEV;
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- return -ENODEV;
- if (brdp->state == 0)
- return -ENODEV;
- if (off >= brdp->memsize || off + count < off)
- return 0;
-
- chbuf = (char __user *) buf;
- size = min(count, (size_t)(brdp->memsize - off));
-
- /*
- * Copy the data a page at a time
- */
-
- p = (void *)__get_free_page(GFP_KERNEL);
- if(p == NULL)
- return -ENOMEM;
-
- while (size > 0) {
- n = min(size, (int)(brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
- n = min(n, (int)PAGE_SIZE);
- if (copy_from_user(p, chbuf, n)) {
- if (count == 0)
- count = -EFAULT;
- goto out;
- }
- spin_lock_irqsave(&brd_lock, flags);
- EBRDENABLE(brdp);
- memptr = EBRDGETMEMPTR(brdp, off);
- memcpy_toio(memptr, p, n);
- EBRDDISABLE(brdp);
- spin_unlock_irqrestore(&brd_lock, flags);
- off += n;
- chbuf += n;
- size -= n;
- }
-out:
- free_page((unsigned long) p);
- *offp = off;
- return count;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the board stats structure to user app.
- */
-
-static int stli_getbrdstats(combrd_t __user *bp)
-{
- struct stlibrd *brdp;
- unsigned int i;
-
- if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
- return -EFAULT;
- if (stli_brdstats.brd >= STL_MAXBRDS)
- return -ENODEV;
- brdp = stli_brds[stli_brdstats.brd];
- if (brdp == NULL)
- return -ENODEV;
-
- memset(&stli_brdstats, 0, sizeof(combrd_t));
-
- stli_brdstats.brd = brdp->brdnr;
- stli_brdstats.type = brdp->brdtype;
- stli_brdstats.hwid = 0;
- stli_brdstats.state = brdp->state;
- stli_brdstats.ioaddr = brdp->iobase;
- stli_brdstats.memaddr = brdp->memaddr;
- stli_brdstats.nrpanels = brdp->nrpanels;
- stli_brdstats.nrports = brdp->nrports;
- for (i = 0; (i < brdp->nrpanels); i++) {
- stli_brdstats.panels[i].panel = i;
- stli_brdstats.panels[i].hwid = brdp->panelids[i];
- stli_brdstats.panels[i].nrports = brdp->panels[i];
- }
-
- if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t)))
- return -EFAULT;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Resolve the referenced port number into a port struct pointer.
- */
-
-static struct stliport *stli_getport(unsigned int brdnr, unsigned int panelnr,
- unsigned int portnr)
-{
- struct stlibrd *brdp;
- unsigned int i;
-
- if (brdnr >= STL_MAXBRDS)
- return NULL;
- brdp = stli_brds[brdnr];
- if (brdp == NULL)
- return NULL;
- for (i = 0; (i < panelnr); i++)
- portnr += brdp->panels[i];
- if (portnr >= brdp->nrports)
- return NULL;
- return brdp->ports[portnr];
-}
-
-/*****************************************************************************/
-
-/*
- * Return the port stats structure to user app. A NULL port struct
- * pointer passed in means that we need to find out from the app
- * what port to get stats for (used through board control device).
- */
-
-static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
-{
- unsigned long flags;
- struct stlibrd *brdp;
- int rc;
-
- memset(&stli_comstats, 0, sizeof(comstats_t));
-
- if (portp == NULL)
- return -ENODEV;
- brdp = stli_brds[portp->brdnr];
- if (brdp == NULL)
- return -ENODEV;
-
- mutex_lock(&portp->port.mutex);
- if (test_bit(BST_STARTED, &brdp->state)) {
- if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
- &stli_cdkstats, sizeof(asystats_t), 1)) < 0) {
- mutex_unlock(&portp->port.mutex);
- return rc;
- }
- } else {
- memset(&stli_cdkstats, 0, sizeof(asystats_t));
- }
-
- stli_comstats.brd = portp->brdnr;
- stli_comstats.panel = portp->panelnr;
- stli_comstats.port = portp->portnr;
- stli_comstats.state = portp->state;
- stli_comstats.flags = portp->port.flags;
-
- spin_lock_irqsave(&brd_lock, flags);
- if (tty != NULL) {
- if (portp->port.tty == tty) {
- stli_comstats.ttystate = tty->flags;
- stli_comstats.rxbuffered = -1;
- if (tty->termios != NULL) {
- stli_comstats.cflags = tty->termios->c_cflag;
- stli_comstats.iflags = tty->termios->c_iflag;
- stli_comstats.oflags = tty->termios->c_oflag;
- stli_comstats.lflags = tty->termios->c_lflag;
- }
- }
- }
- spin_unlock_irqrestore(&brd_lock, flags);
-
- stli_comstats.txtotal = stli_cdkstats.txchars;
- stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover;
- stli_comstats.txbuffered = stli_cdkstats.txringq;
- stli_comstats.rxbuffered += stli_cdkstats.rxringq;
- stli_comstats.rxoverrun = stli_cdkstats.overruns;
- stli_comstats.rxparity = stli_cdkstats.parity;
- stli_comstats.rxframing = stli_cdkstats.framing;
- stli_comstats.rxlost = stli_cdkstats.ringover;
- stli_comstats.rxbreaks = stli_cdkstats.rxbreaks;
- stli_comstats.txbreaks = stli_cdkstats.txbreaks;
- stli_comstats.txxon = stli_cdkstats.txstart;
- stli_comstats.txxoff = stli_cdkstats.txstop;
- stli_comstats.rxxon = stli_cdkstats.rxstart;
- stli_comstats.rxxoff = stli_cdkstats.rxstop;
- stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2;
- stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff;
- stli_comstats.modem = stli_cdkstats.dcdcnt;
- stli_comstats.hwid = stli_cdkstats.hwid;
- stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
- mutex_unlock(&portp->port.mutex);
-
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the port stats structure to user app. A NULL port struct
- * pointer passed in means that we need to find out from the app
- * what port to get stats for (used through board control device).
- */
-
-static int stli_getportstats(struct tty_struct *tty, struct stliport *portp,
- comstats_t __user *cp)
-{
- struct stlibrd *brdp;
- int rc;
-
- if (!portp) {
- if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
- return -EFAULT;
- portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
- stli_comstats.port);
- if (!portp)
- return -ENODEV;
- }
-
- brdp = stli_brds[portp->brdnr];
- if (!brdp)
- return -ENODEV;
-
- if ((rc = stli_portcmdstats(tty, portp)) < 0)
- return rc;
-
- return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ?
- -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Clear the port stats structure. We also return it zeroed out...
- */
-
-static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp)
-{
- struct stlibrd *brdp;
- int rc;
-
- if (!portp) {
- if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
- return -EFAULT;
- portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
- stli_comstats.port);
- if (!portp)
- return -ENODEV;
- }
-
- brdp = stli_brds[portp->brdnr];
- if (!brdp)
- return -ENODEV;
-
- mutex_lock(&portp->port.mutex);
-
- if (test_bit(BST_STARTED, &brdp->state)) {
- if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, NULL, 0, 0)) < 0) {
- mutex_unlock(&portp->port.mutex);
- return rc;
- }
- }
-
- memset(&stli_comstats, 0, sizeof(comstats_t));
- stli_comstats.brd = portp->brdnr;
- stli_comstats.panel = portp->panelnr;
- stli_comstats.port = portp->portnr;
- mutex_unlock(&portp->port.mutex);
-
- if (copy_to_user(cp, &stli_comstats, sizeof(comstats_t)))
- return -EFAULT;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the entire driver ports structure to a user app.
- */
-
-static int stli_getportstruct(struct stliport __user *arg)
-{
- struct stliport stli_dummyport;
- struct stliport *portp;
-
- if (copy_from_user(&stli_dummyport, arg, sizeof(struct stliport)))
- return -EFAULT;
- portp = stli_getport(stli_dummyport.brdnr, stli_dummyport.panelnr,
- stli_dummyport.portnr);
- if (!portp)
- return -ENODEV;
- if (copy_to_user(arg, portp, sizeof(struct stliport)))
- return -EFAULT;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the entire driver board structure to a user app.
- */
-
-static int stli_getbrdstruct(struct stlibrd __user *arg)
-{
- struct stlibrd stli_dummybrd;
- struct stlibrd *brdp;
-
- if (copy_from_user(&stli_dummybrd, arg, sizeof(struct stlibrd)))
- return -EFAULT;
- if (stli_dummybrd.brdnr >= STL_MAXBRDS)
- return -ENODEV;
- brdp = stli_brds[stli_dummybrd.brdnr];
- if (!brdp)
- return -ENODEV;
- if (copy_to_user(arg, brdp, sizeof(struct stlibrd)))
- return -EFAULT;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * The "staliomem" device is also required to do some special operations on
- * the board. We need to be able to send an interrupt to the board,
- * reset it, and start/stop it.
- */
-
-static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-{
- struct stlibrd *brdp;
- int brdnr, rc, done;
- void __user *argp = (void __user *)arg;
-
-/*
- * First up handle the board independent ioctls.
- */
- done = 0;
- rc = 0;
-
- switch (cmd) {
- case COM_GETPORTSTATS:
- rc = stli_getportstats(NULL, NULL, argp);
- done++;
- break;
- case COM_CLRPORTSTATS:
- rc = stli_clrportstats(NULL, argp);
- done++;
- break;
- case COM_GETBRDSTATS:
- rc = stli_getbrdstats(argp);
- done++;
- break;
- case COM_READPORT:
- rc = stli_getportstruct(argp);
- done++;
- break;
- case COM_READBOARD:
- rc = stli_getbrdstruct(argp);
- done++;
- break;
- }
- if (done)
- return rc;
-
-/*
- * Now handle the board specific ioctls. These all depend on the
- * minor number of the device they were called from.
- */
- brdnr = iminor(fp->f_dentry->d_inode);
- if (brdnr >= STL_MAXBRDS)
- return -ENODEV;
- brdp = stli_brds[brdnr];
- if (!brdp)
- return -ENODEV;
- if (brdp->state == 0)
- return -ENODEV;
-
- switch (cmd) {
- case STL_BINTR:
- EBRDINTR(brdp);
- break;
- case STL_BSTART:
- rc = stli_startbrd(brdp);
- break;
- case STL_BSTOP:
- clear_bit(BST_STARTED, &brdp->state);
- break;
- case STL_BRESET:
- clear_bit(BST_STARTED, &brdp->state);
- EBRDRESET(brdp);
- if (stli_shared == 0) {
- if (brdp->reenable != NULL)
- (* brdp->reenable)(brdp);
- }
- break;
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- return rc;
-}
-
-static const struct tty_operations stli_ops = {
- .open = stli_open,
- .close = stli_close,
- .write = stli_write,
- .put_char = stli_putchar,
- .flush_chars = stli_flushchars,
- .write_room = stli_writeroom,
- .chars_in_buffer = stli_charsinbuffer,
- .ioctl = stli_ioctl,
- .set_termios = stli_settermios,
- .throttle = stli_throttle,
- .unthrottle = stli_unthrottle,
- .stop = stli_stop,
- .start = stli_start,
- .hangup = stli_hangup,
- .flush_buffer = stli_flushbuffer,
- .break_ctl = stli_breakctl,
- .wait_until_sent = stli_waituntilsent,
- .send_xchar = stli_sendxchar,
- .tiocmget = stli_tiocmget,
- .tiocmset = stli_tiocmset,
- .proc_fops = &stli_proc_fops,
-};
-
-static const struct tty_port_operations stli_port_ops = {
- .carrier_raised = stli_carrier_raised,
- .dtr_rts = stli_dtr_rts,
- .activate = stli_activate,
- .shutdown = stli_shutdown,
-};
-
-/*****************************************************************************/
-/*
- * Loadable module initialization stuff.
- */
-
-static void istallion_cleanup_isa(void)
-{
- struct stlibrd *brdp;
- unsigned int j;
-
- for (j = 0; (j < stli_nrbrds); j++) {
- if ((brdp = stli_brds[j]) == NULL ||
- test_bit(BST_PROBED, &brdp->state))
- continue;
-
- stli_cleanup_ports(brdp);
-
- iounmap(brdp->membase);
- if (brdp->iosize > 0)
- release_region(brdp->iobase, brdp->iosize);
- kfree(brdp);
- stli_brds[j] = NULL;
- }
-}
-
-static int __init istallion_module_init(void)
-{
- unsigned int i;
- int retval;
-
- printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion);
-
- spin_lock_init(&stli_lock);
- spin_lock_init(&brd_lock);
-
- stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
- if (!stli_txcookbuf) {
- printk(KERN_ERR "istallion: failed to allocate memory "
- "(size=%d)\n", STLI_TXBUFSIZE);
- retval = -ENOMEM;
- goto err;
- }
-
- stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
- if (!stli_serial) {
- retval = -ENOMEM;
- goto err_free;
- }
-
- stli_serial->owner = THIS_MODULE;
- stli_serial->driver_name = stli_drvname;
- stli_serial->name = stli_serialname;
- stli_serial->major = STL_SERIALMAJOR;
- stli_serial->minor_start = 0;
- stli_serial->type = TTY_DRIVER_TYPE_SERIAL;
- stli_serial->subtype = SERIAL_TYPE_NORMAL;
- stli_serial->init_termios = stli_deftermios;
- stli_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(stli_serial, &stli_ops);
-
- retval = tty_register_driver(stli_serial);
- if (retval) {
- printk(KERN_ERR "istallion: failed to register serial driver\n");
- goto err_ttyput;
- }
-
- retval = stli_initbrds();
- if (retval)
- goto err_ttyunr;
-
-/*
- * Set up a character driver for the shared memory region. We need this
- * to down load the slave code image. Also it is a useful debugging tool.
- */
- retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
- if (retval) {
- printk(KERN_ERR "istallion: failed to register serial memory "
- "device\n");
- goto err_deinit;
- }
-
- istallion_class = class_create(THIS_MODULE, "staliomem");
- for (i = 0; i < 4; i++)
- device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
- NULL, "staliomem%d", i);
-
- return 0;
-err_deinit:
- pci_unregister_driver(&stli_pcidriver);
- istallion_cleanup_isa();
-err_ttyunr:
- tty_unregister_driver(stli_serial);
-err_ttyput:
- put_tty_driver(stli_serial);
-err_free:
- kfree(stli_txcookbuf);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-static void __exit istallion_module_exit(void)
-{
- unsigned int j;
-
- printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
- stli_drvversion);
-
- if (stli_timeron) {
- stli_timeron = 0;
- del_timer_sync(&stli_timerlist);
- }
-
- unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
-
- for (j = 0; j < 4; j++)
- device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, j));
- class_destroy(istallion_class);
-
- pci_unregister_driver(&stli_pcidriver);
- istallion_cleanup_isa();
-
- tty_unregister_driver(stli_serial);
- put_tty_driver(stli_serial);
-
- kfree(stli_txcookbuf);
-}
-
-module_init(istallion_module_init);
-module_exit(istallion_module_exit);
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
deleted file mode 100644
index 602643a..0000000
--- a/drivers/char/riscom8.c
+++ /dev/null
@@ -1,1560 +0,0 @@
-/*
- * linux/drivers/char/riscom.c -- RISCom/8 multiport serial driver.
- *
- * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- * This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
- * programming info was obtained from various drivers for other OSes
- * (FreeBSD, ISC, etc), but no source code from those drivers were
- * directly included in this driver.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Revision 1.1
- *
- * ChangeLog:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 27-Jun-2001
- * - get rid of check_region and several cleanups
- */
-
-#include <linux/module.h>
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/tty_flip.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-
-#include <linux/uaccess.h>
-
-#include "riscom8.h"
-#include "riscom8_reg.h"
-
-/* Am I paranoid or not ? ;-) */
-#define RISCOM_PARANOIA_CHECK
-
-/*
- * Crazy InteliCom/8 boards sometimes have swapped CTS & DSR signals.
- * You can slightly speed up things by #undefing the following option,
- * if you are REALLY sure that your board is correct one.
- */
-
-#define RISCOM_BRAIN_DAMAGED_CTS
-
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#undef RC_REPORT_FIFO
-#undef RC_REPORT_OVERRUN
-
-
-#define RISCOM_LEGAL_FLAGS \
- (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
- ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
- ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-
-static struct tty_driver *riscom_driver;
-
-static DEFINE_SPINLOCK(riscom_lock);
-
-static struct riscom_board rc_board[RC_NBOARD] = {
- {
- .base = RC_IOBASE1,
- },
- {
- .base = RC_IOBASE2,
- },
- {
- .base = RC_IOBASE3,
- },
- {
- .base = RC_IOBASE4,
- },
-};
-
-static struct riscom_port rc_port[RC_NBOARD * RC_NPORT];
-
-/* RISCom/8 I/O ports addresses (without address translation) */
-static unsigned short rc_ioport[] = {
-#if 1
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c,
-#else
- 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x09, 0x0a, 0x0b, 0x0c, 0x10,
- 0x11, 0x12, 0x18, 0x28, 0x31, 0x32, 0x39, 0x3a, 0x40, 0x41, 0x61, 0x62,
- 0x63, 0x64, 0x6b, 0x70, 0x71, 0x78, 0x7a, 0x7b, 0x7f, 0x100, 0x101
-#endif
-};
-#define RC_NIOPORT ARRAY_SIZE(rc_ioport)
-
-
-static int rc_paranoia_check(struct riscom_port const *port,
- char *name, const char *routine)
-{
-#ifdef RISCOM_PARANOIA_CHECK
- static const char badmagic[] = KERN_INFO
- "rc: Warning: bad riscom port magic number for device %s in %s\n";
- static const char badinfo[] = KERN_INFO
- "rc: Warning: null riscom port for device %s in %s\n";
-
- if (!port) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (port->magic != RISCOM8_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-/*
- *
- * Service functions for RISCom/8 driver.
- *
- */
-
-/* Get board number from pointer */
-static inline int board_No(struct riscom_board const *bp)
-{
- return bp - rc_board;
-}
-
-/* Get port number from pointer */
-static inline int port_No(struct riscom_port const *port)
-{
- return RC_PORT(port - rc_port);
-}
-
-/* Get pointer to board from pointer to port */
-static inline struct riscom_board *port_Board(struct riscom_port const *port)
-{
- return &rc_board[RC_BOARD(port - rc_port)];
-}
-
-/* Input Byte from CL CD180 register */
-static inline unsigned char rc_in(struct riscom_board const *bp,
- unsigned short reg)
-{
- return inb(bp->base + RC_TO_ISA(reg));
-}
-
-/* Output Byte to CL CD180 register */
-static inline void rc_out(struct riscom_board const *bp, unsigned short reg,
- unsigned char val)
-{
- outb(val, bp->base + RC_TO_ISA(reg));
-}
-
-/* Wait for Channel Command Register ready */
-static void rc_wait_CCR(struct riscom_board const *bp)
-{
- unsigned long delay;
-
- /* FIXME: need something more descriptive then 100000 :) */
- for (delay = 100000; delay; delay--)
- if (!rc_in(bp, CD180_CCR))
- return;
-
- printk(KERN_INFO "rc%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-/*
- * RISCom/8 probe functions.
- */
-
-static int rc_request_io_range(struct riscom_board * const bp)
-{
- int i;
-
- for (i = 0; i < RC_NIOPORT; i++)
- if (!request_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1,
- "RISCom/8")) {
- goto out_release;
- }
- return 0;
-out_release:
- printk(KERN_INFO "rc%d: Skipping probe at 0x%03x. IO address in use.\n",
- board_No(bp), bp->base);
- while (--i >= 0)
- release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
- return 1;
-}
-
-static void rc_release_io_range(struct riscom_board * const bp)
-{
- int i;
-
- for (i = 0; i < RC_NIOPORT; i++)
- release_region(RC_TO_ISA(rc_ioport[i]) + bp->base, 1);
-}
-
-/* Reset and setup CD180 chip */
-static void __init rc_init_CD180(struct riscom_board const *bp)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- rc_out(bp, RC_CTOUT, 0); /* Clear timeout */
- rc_wait_CCR(bp); /* Wait for CCR ready */
- rc_out(bp, CD180_CCR, CCR_HARDRESET); /* Reset CD180 chip */
- spin_unlock_irqrestore(&riscom_lock, flags);
- msleep(50); /* Delay 0.05 sec */
- spin_lock_irqsave(&riscom_lock, flags);
- rc_out(bp, CD180_GIVR, RC_ID); /* Set ID for this chip */
- rc_out(bp, CD180_GICR, 0); /* Clear all bits */
- rc_out(bp, CD180_PILR1, RC_ACK_MINT); /* Prio for modem intr */
- rc_out(bp, CD180_PILR2, RC_ACK_TINT); /* Prio for tx intr */
- rc_out(bp, CD180_PILR3, RC_ACK_RINT); /* Prio for rx intr */
-
- /* Setting up prescaler. We need 4 ticks per 1 ms */
- rc_out(bp, CD180_PPRH, (RC_OSCFREQ/(1000000/RISCOM_TPS)) >> 8);
- rc_out(bp, CD180_PPRL, (RC_OSCFREQ/(1000000/RISCOM_TPS)) & 0xff);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-/* Main probing routine, also sets irq. */
-static int __init rc_probe(struct riscom_board *bp)
-{
- unsigned char val1, val2;
- int irqs = 0;
- int retries;
-
- bp->irq = 0;
-
- if (rc_request_io_range(bp))
- return 1;
-
- /* Are the I/O ports here ? */
- rc_out(bp, CD180_PPRL, 0x5a);
- outb(0xff, 0x80);
- val1 = rc_in(bp, CD180_PPRL);
- rc_out(bp, CD180_PPRL, 0xa5);
- outb(0x00, 0x80);
- val2 = rc_in(bp, CD180_PPRL);
-
- if ((val1 != 0x5a) || (val2 != 0xa5)) {
- printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not found.\n",
- board_No(bp), bp->base);
- goto out_release;
- }
-
- /* It's time to find IRQ for this board */
- for (retries = 0; retries < 5 && irqs <= 0; retries++) {
- irqs = probe_irq_on();
- rc_init_CD180(bp); /* Reset CD180 chip */
- rc_out(bp, CD180_CAR, 2); /* Select port 2 */
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_TXEN); /* Enable transmitter */
- rc_out(bp, CD180_IER, IER_TXRDY);/* Enable tx empty intr */
- msleep(50);
- irqs = probe_irq_off(irqs);
- val1 = rc_in(bp, RC_BSR); /* Get Board Status reg */
- val2 = rc_in(bp, RC_ACK_TINT); /* ACK interrupt */
- rc_init_CD180(bp); /* Reset CD180 again */
-
- if ((val1 & RC_BSR_TINT) || (val2 != (RC_ID | GIVR_IT_TX))) {
- printk(KERN_ERR "rc%d: RISCom/8 Board at 0x%03x not "
- "found.\n", board_No(bp), bp->base);
- goto out_release;
- }
- }
-
- if (irqs <= 0) {
- printk(KERN_ERR "rc%d: Can't find IRQ for RISCom/8 board "
- "at 0x%03x.\n", board_No(bp), bp->base);
- goto out_release;
- }
- bp->irq = irqs;
- bp->flags |= RC_BOARD_PRESENT;
-
- printk(KERN_INFO "rc%d: RISCom/8 Rev. %c board detected at "
- "0x%03x, IRQ %d.\n",
- board_No(bp),
- (rc_in(bp, CD180_GFRCR) & 0x0f) + 'A', /* Board revision */
- bp->base, bp->irq);
-
- return 0;
-out_release:
- rc_release_io_range(bp);
- return 1;
-}
-
-/*
- *
- * Interrupt processing routines.
- *
- */
-
-static struct riscom_port *rc_get_port(struct riscom_board const *bp,
- unsigned char const *what)
-{
- unsigned char channel;
- struct riscom_port *port;
-
- channel = rc_in(bp, CD180_GICR) >> GICR_CHAN_OFF;
- if (channel < CD180_NCH) {
- port = &rc_port[board_No(bp) * RC_NPORT + channel];
- if (port->port.flags & ASYNC_INITIALIZED)
- return port;
- }
- printk(KERN_ERR "rc%d: %s interrupt from invalid port %d\n",
- board_No(bp), what, channel);
- return NULL;
-}
-
-static void rc_receive_exc(struct riscom_board const *bp)
-{
- struct riscom_port *port;
- struct tty_struct *tty;
- unsigned char status;
- unsigned char ch, flag;
-
- port = rc_get_port(bp, "Receive");
- if (port == NULL)
- return;
-
- tty = tty_port_tty_get(&port->port);
-
-#ifdef RC_REPORT_OVERRUN
- status = rc_in(bp, CD180_RCSR);
- if (status & RCSR_OE)
- port->overrun++;
- status &= port->mark_mask;
-#else
- status = rc_in(bp, CD180_RCSR) & port->mark_mask;
-#endif
- ch = rc_in(bp, CD180_RDR);
- if (!status)
- goto out;
- if (status & RCSR_TOUT) {
- printk(KERN_WARNING "rc%d: port %d: Receiver timeout. "
- "Hardware problems ?\n",
- board_No(bp), port_No(port));
- goto out;
-
- } else if (status & RCSR_BREAK) {
- printk(KERN_INFO "rc%d: port %d: Handling break...\n",
- board_No(bp), port_No(port));
- flag = TTY_BREAK;
- if (tty && (port->port.flags & ASYNC_SAK))
- do_SAK(tty);
-
- } else if (status & RCSR_PE)
- flag = TTY_PARITY;
-
- else if (status & RCSR_FE)
- flag = TTY_FRAME;
-
- else if (status & RCSR_OE)
- flag = TTY_OVERRUN;
- else
- flag = TTY_NORMAL;
-
- if (tty) {
- tty_insert_flip_char(tty, ch, flag);
- tty_flip_buffer_push(tty);
- }
-out:
- tty_kref_put(tty);
-}
-
-static void rc_receive(struct riscom_board const *bp)
-{
- struct riscom_port *port;
- struct tty_struct *tty;
- unsigned char count;
-
- port = rc_get_port(bp, "Receive");
- if (port == NULL)
- return;
-
- tty = tty_port_tty_get(&port->port);
-
- count = rc_in(bp, CD180_RDCR);
-
-#ifdef RC_REPORT_FIFO
- port->hits[count > 8 ? 9 : count]++;
-#endif
-
- while (count--) {
- u8 ch = rc_in(bp, CD180_RDR);
- if (tty)
- tty_insert_flip_char(tty, ch, TTY_NORMAL);
- }
- if (tty) {
- tty_flip_buffer_push(tty);
- tty_kref_put(tty);
- }
-}
-
-static void rc_transmit(struct riscom_board const *bp)
-{
- struct riscom_port *port;
- struct tty_struct *tty;
- unsigned char count;
-
- port = rc_get_port(bp, "Transmit");
- if (port == NULL)
- return;
-
- tty = tty_port_tty_get(&port->port);
-
- if (port->IER & IER_TXEMPTY) {
- /* FIFO drained */
- rc_out(bp, CD180_CAR, port_No(port));
- port->IER &= ~IER_TXEMPTY;
- rc_out(bp, CD180_IER, port->IER);
- goto out;
- }
-
- if ((port->xmit_cnt <= 0 && !port->break_length)
- || (tty && (tty->stopped || tty->hw_stopped))) {
- rc_out(bp, CD180_CAR, port_No(port));
- port->IER &= ~IER_TXRDY;
- rc_out(bp, CD180_IER, port->IER);
- goto out;
- }
-
- if (port->break_length) {
- if (port->break_length > 0) {
- if (port->COR2 & COR2_ETC) {
- rc_out(bp, CD180_TDR, CD180_C_ESC);
- rc_out(bp, CD180_TDR, CD180_C_SBRK);
- port->COR2 &= ~COR2_ETC;
- }
- count = min_t(int, port->break_length, 0xff);
- rc_out(bp, CD180_TDR, CD180_C_ESC);
- rc_out(bp, CD180_TDR, CD180_C_DELAY);
- rc_out(bp, CD180_TDR, count);
- port->break_length -= count;
- if (port->break_length == 0)
- port->break_length--;
- } else {
- rc_out(bp, CD180_TDR, CD180_C_ESC);
- rc_out(bp, CD180_TDR, CD180_C_EBRK);
- rc_out(bp, CD180_COR2, port->COR2);
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_CORCHG2);
- port->break_length = 0;
- }
- goto out;
- }
-
- count = CD180_NFIFO;
- do {
- rc_out(bp, CD180_TDR, port->port.xmit_buf[port->xmit_tail++]);
- port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
- if (--port->xmit_cnt <= 0)
- break;
- } while (--count > 0);
-
- if (port->xmit_cnt <= 0) {
- rc_out(bp, CD180_CAR, port_No(port));
- port->IER &= ~IER_TXRDY;
- rc_out(bp, CD180_IER, port->IER);
- }
- if (tty && port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
-out:
- tty_kref_put(tty);
-}
-
-static void rc_check_modem(struct riscom_board const *bp)
-{
- struct riscom_port *port;
- struct tty_struct *tty;
- unsigned char mcr;
-
- port = rc_get_port(bp, "Modem");
- if (port == NULL)
- return;
-
- tty = tty_port_tty_get(&port->port);
-
- mcr = rc_in(bp, CD180_MCR);
- if (mcr & MCR_CDCHG) {
- if (rc_in(bp, CD180_MSVR) & MSVR_CD)
- wake_up_interruptible(&port->port.open_wait);
- else if (tty)
- tty_hangup(tty);
- }
-
-#ifdef RISCOM_BRAIN_DAMAGED_CTS
- if (mcr & MCR_CTSCHG) {
- if (rc_in(bp, CD180_MSVR) & MSVR_CTS) {
- port->IER |= IER_TXRDY;
- if (tty) {
- tty->hw_stopped = 0;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
- }
- } else {
- if (tty)
- tty->hw_stopped = 1;
- port->IER &= ~IER_TXRDY;
- }
- rc_out(bp, CD180_IER, port->IER);
- }
- if (mcr & MCR_DSRCHG) {
- if (rc_in(bp, CD180_MSVR) & MSVR_DSR) {
- port->IER |= IER_TXRDY;
- if (tty) {
- tty->hw_stopped = 0;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
- }
- } else {
- if (tty)
- tty->hw_stopped = 1;
- port->IER &= ~IER_TXRDY;
- }
- rc_out(bp, CD180_IER, port->IER);
- }
-#endif /* RISCOM_BRAIN_DAMAGED_CTS */
-
- /* Clear change bits */
- rc_out(bp, CD180_MCR, 0);
- tty_kref_put(tty);
-}
-
-/* The main interrupt processing routine */
-static irqreturn_t rc_interrupt(int dummy, void *dev_id)
-{
- unsigned char status;
- unsigned char ack;
- struct riscom_board *bp = dev_id;
- unsigned long loop = 0;
- int handled = 0;
-
- if (!(bp->flags & RC_BOARD_ACTIVE))
- return IRQ_NONE;
-
- while ((++loop < 16) && ((status = ~(rc_in(bp, RC_BSR))) &
- (RC_BSR_TOUT | RC_BSR_TINT |
- RC_BSR_MINT | RC_BSR_RINT))) {
- handled = 1;
- if (status & RC_BSR_TOUT)
- printk(KERN_WARNING "rc%d: Got timeout. Hardware "
- "error?\n", board_No(bp));
- else if (status & RC_BSR_RINT) {
- ack = rc_in(bp, RC_ACK_RINT);
- if (ack == (RC_ID | GIVR_IT_RCV))
- rc_receive(bp);
- else if (ack == (RC_ID | GIVR_IT_REXC))
- rc_receive_exc(bp);
- else
- printk(KERN_WARNING "rc%d: Bad receive ack "
- "0x%02x.\n",
- board_No(bp), ack);
- } else if (status & RC_BSR_TINT) {
- ack = rc_in(bp, RC_ACK_TINT);
- if (ack == (RC_ID | GIVR_IT_TX))
- rc_transmit(bp);
- else
- printk(KERN_WARNING "rc%d: Bad transmit ack "
- "0x%02x.\n",
- board_No(bp), ack);
- } else /* if (status & RC_BSR_MINT) */ {
- ack = rc_in(bp, RC_ACK_MINT);
- if (ack == (RC_ID | GIVR_IT_MODEM))
- rc_check_modem(bp);
- else
- printk(KERN_WARNING "rc%d: Bad modem ack "
- "0x%02x.\n",
- board_No(bp), ack);
- }
- rc_out(bp, CD180_EOIR, 0); /* Mark end of interrupt */
- rc_out(bp, RC_CTOUT, 0); /* Clear timeout flag */
- }
- return IRQ_RETVAL(handled);
-}
-
-/*
- * Routines for open & close processing.
- */
-
-/* Called with disabled interrupts */
-static int rc_setup_board(struct riscom_board *bp)
-{
- int error;
-
- if (bp->flags & RC_BOARD_ACTIVE)
- return 0;
-
- error = request_irq(bp->irq, rc_interrupt, IRQF_DISABLED,
- "RISCom/8", bp);
- if (error)
- return error;
-
- rc_out(bp, RC_CTOUT, 0); /* Just in case */
- bp->DTR = ~0;
- rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
-
- bp->flags |= RC_BOARD_ACTIVE;
-
- return 0;
-}
-
-/* Called with disabled interrupts */
-static void rc_shutdown_board(struct riscom_board *bp)
-{
- if (!(bp->flags & RC_BOARD_ACTIVE))
- return;
-
- bp->flags &= ~RC_BOARD_ACTIVE;
-
- free_irq(bp->irq, NULL);
-
- bp->DTR = ~0;
- rc_out(bp, RC_DTR, bp->DTR); /* Drop DTR on all ports */
-
-}
-
-/*
- * Setting up port characteristics.
- * Must be called with disabled interrupts
- */
-static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp,
- struct riscom_port *port)
-{
- unsigned long baud;
- long tmp;
- unsigned char cor1 = 0, cor3 = 0;
- unsigned char mcor1 = 0, mcor2 = 0;
-
- port->IER = 0;
- port->COR2 = 0;
- port->MSVR = MSVR_RTS;
-
- baud = tty_get_baud_rate(tty);
-
- /* Select port on the board */
- rc_out(bp, CD180_CAR, port_No(port));
-
- if (!baud) {
- /* Drop DTR & exit */
- bp->DTR |= (1u << port_No(port));
- rc_out(bp, RC_DTR, bp->DTR);
- return;
- } else {
- /* Set DTR on */
- bp->DTR &= ~(1u << port_No(port));
- rc_out(bp, RC_DTR, bp->DTR);
- }
-
- /*
- * Now we must calculate some speed depended things
- */
-
- /* Set baud rate for port */
- tmp = (((RC_OSCFREQ + baud/2) / baud +
- CD180_TPC/2) / CD180_TPC);
-
- rc_out(bp, CD180_RBPRH, (tmp >> 8) & 0xff);
- rc_out(bp, CD180_TBPRH, (tmp >> 8) & 0xff);
- rc_out(bp, CD180_RBPRL, tmp & 0xff);
- rc_out(bp, CD180_TBPRL, tmp & 0xff);
-
- baud = (baud + 5) / 10; /* Estimated CPS */
-
- /* Two timer ticks seems enough to wakeup something like SLIP driver */
- tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO;
- port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
- SERIAL_XMIT_SIZE - 1 : tmp);
-
- /* Receiver timeout will be transmission time for 1.5 chars */
- tmp = (RISCOM_TPS + RISCOM_TPS/2 + baud/2) / baud;
- tmp = (tmp > 0xff) ? 0xff : tmp;
- rc_out(bp, CD180_RTPR, tmp);
-
- switch (C_CSIZE(tty)) {
- case CS5:
- cor1 |= COR1_5BITS;
- break;
- case CS6:
- cor1 |= COR1_6BITS;
- break;
- case CS7:
- cor1 |= COR1_7BITS;
- break;
- case CS8:
- cor1 |= COR1_8BITS;
- break;
- }
- if (C_CSTOPB(tty))
- cor1 |= COR1_2SB;
-
- cor1 |= COR1_IGNORE;
- if (C_PARENB(tty)) {
- cor1 |= COR1_NORMPAR;
- if (C_PARODD(tty))
- cor1 |= COR1_ODDP;
- if (I_INPCK(tty))
- cor1 &= ~COR1_IGNORE;
- }
- /* Set marking of some errors */
- port->mark_mask = RCSR_OE | RCSR_TOUT;
- if (I_INPCK(tty))
- port->mark_mask |= RCSR_FE | RCSR_PE;
- if (I_BRKINT(tty) || I_PARMRK(tty))
- port->mark_mask |= RCSR_BREAK;
- if (I_IGNPAR(tty))
- port->mark_mask &= ~(RCSR_FE | RCSR_PE);
- if (I_IGNBRK(tty)) {
- port->mark_mask &= ~RCSR_BREAK;
- if (I_IGNPAR(tty))
- /* Real raw mode. Ignore all */
- port->mark_mask &= ~RCSR_OE;
- }
- /* Enable Hardware Flow Control */
- if (C_CRTSCTS(tty)) {
-#ifdef RISCOM_BRAIN_DAMAGED_CTS
- port->IER |= IER_DSR | IER_CTS;
- mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
- mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
- tty->hw_stopped = !(rc_in(bp, CD180_MSVR) &
- (MSVR_CTS|MSVR_DSR));
-#else
- port->COR2 |= COR2_CTSAE;
-#endif
- }
- /* Enable Software Flow Control. FIXME: I'm not sure about this */
- /* Some people reported that it works, but I still doubt */
- if (I_IXON(tty)) {
- port->COR2 |= COR2_TXIBE;
- cor3 |= (COR3_FCT | COR3_SCDE);
- if (I_IXANY(tty))
- port->COR2 |= COR2_IXM;
- rc_out(bp, CD180_SCHR1, START_CHAR(tty));
- rc_out(bp, CD180_SCHR2, STOP_CHAR(tty));
- rc_out(bp, CD180_SCHR3, START_CHAR(tty));
- rc_out(bp, CD180_SCHR4, STOP_CHAR(tty));
- }
- if (!C_CLOCAL(tty)) {
- /* Enable CD check */
- port->IER |= IER_CD;
- mcor1 |= MCOR1_CDZD;
- mcor2 |= MCOR2_CDOD;
- }
-
- if (C_CREAD(tty))
- /* Enable receiver */
- port->IER |= IER_RXD;
-
- /* Set input FIFO size (1-8 bytes) */
- cor3 |= RISCOM_RXFIFO;
- /* Setting up CD180 channel registers */
- rc_out(bp, CD180_COR1, cor1);
- rc_out(bp, CD180_COR2, port->COR2);
- rc_out(bp, CD180_COR3, cor3);
- /* Make CD180 know about registers change */
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
- /* Setting up modem option registers */
- rc_out(bp, CD180_MCOR1, mcor1);
- rc_out(bp, CD180_MCOR2, mcor2);
- /* Enable CD180 transmitter & receiver */
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_TXEN | CCR_RXEN);
- /* Enable interrupts */
- rc_out(bp, CD180_IER, port->IER);
- /* And finally set RTS on */
- rc_out(bp, CD180_MSVR, port->MSVR);
-}
-
-/* Must be called with interrupts enabled */
-static int rc_activate_port(struct tty_port *port, struct tty_struct *tty)
-{
- struct riscom_port *rp = container_of(port, struct riscom_port, port);
- struct riscom_board *bp = port_Board(rp);
- unsigned long flags;
-
- if (tty_port_alloc_xmit_buf(port) < 0)
- return -ENOMEM;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- clear_bit(TTY_IO_ERROR, &tty->flags);
- bp->count++;
- rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0;
- rc_change_speed(tty, bp, rp);
- spin_unlock_irqrestore(&riscom_lock, flags);
- return 0;
-}
-
-/* Must be called with interrupts disabled */
-static void rc_shutdown_port(struct tty_struct *tty,
- struct riscom_board *bp, struct riscom_port *port)
-{
-#ifdef RC_REPORT_OVERRUN
- printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n",
- board_No(bp), port_No(port), port->overrun);
-#endif
-#ifdef RC_REPORT_FIFO
- {
- int i;
-
- printk(KERN_INFO "rc%d: port %d: FIFO hits [ ",
- board_No(bp), port_No(port));
- for (i = 0; i < 10; i++)
- printk("%ld ", port->hits[i]);
- printk("].\n");
- }
-#endif
- tty_port_free_xmit_buf(&port->port);
-
- /* Select port */
- rc_out(bp, CD180_CAR, port_No(port));
- /* Reset port */
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_SOFTRESET);
- /* Disable all interrupts from this port */
- port->IER = 0;
- rc_out(bp, CD180_IER, port->IER);
-
- set_bit(TTY_IO_ERROR, &tty->flags);
-
- if (--bp->count < 0) {
- printk(KERN_INFO "rc%d: rc_shutdown_port: "
- "bad board count: %d\n",
- board_No(bp), bp->count);
- bp->count = 0;
- }
- /*
- * If this is the last opened port on the board
- * shutdown whole board
- */
- if (!bp->count)
- rc_shutdown_board(bp);
-}
-
-static int carrier_raised(struct tty_port *port)
-{
- struct riscom_port *p = container_of(port, struct riscom_port, port);
- struct riscom_board *bp = port_Board(p);
- unsigned long flags;
- int CD;
-
- spin_lock_irqsave(&riscom_lock, flags);
- rc_out(bp, CD180_CAR, port_No(p));
- CD = rc_in(bp, CD180_MSVR) & MSVR_CD;
- rc_out(bp, CD180_MSVR, MSVR_RTS);
- bp->DTR &= ~(1u << port_No(p));
- rc_out(bp, RC_DTR, bp->DTR);
- spin_unlock_irqrestore(&riscom_lock, flags);
- return CD;
-}
-
-static void dtr_rts(struct tty_port *port, int onoff)
-{
- struct riscom_port *p = container_of(port, struct riscom_port, port);
- struct riscom_board *bp = port_Board(p);
- unsigned long flags;
-
- spin_lock_irqsave(&riscom_lock, flags);
- bp->DTR &= ~(1u << port_No(p));
- if (onoff == 0)
- bp->DTR |= (1u << port_No(p));
- rc_out(bp, RC_DTR, bp->DTR);
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static int rc_open(struct tty_struct *tty, struct file *filp)
-{
- int board;
- int error;
- struct riscom_port *port;
- struct riscom_board *bp;
-
- board = RC_BOARD(tty->index);
- if (board >= RC_NBOARD || !(rc_board[board].flags & RC_BOARD_PRESENT))
- return -ENODEV;
-
- bp = &rc_board[board];
- port = rc_port + board * RC_NPORT + RC_PORT(tty->index);
- if (rc_paranoia_check(port, tty->name, "rc_open"))
- return -ENODEV;
-
- error = rc_setup_board(bp);
- if (error)
- return error;
-
- tty->driver_data = port;
- return tty_port_open(&port->port, tty, filp);
-}
-
-static void rc_flush_buffer(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_flush_buffer"))
- return;
-
- spin_lock_irqsave(&riscom_lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- tty_wakeup(tty);
-}
-
-static void rc_close_port(struct tty_port *port)
-{
- unsigned long flags;
- struct riscom_port *rp = container_of(port, struct riscom_port, port);
- struct riscom_board *bp = port_Board(rp);
- unsigned long timeout;
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
-
- spin_lock_irqsave(&riscom_lock, flags);
- rp->IER &= ~IER_RXD;
-
- rp->IER &= ~IER_TXRDY;
- rp->IER |= IER_TXEMPTY;
- rc_out(bp, CD180_CAR, port_No(rp));
- rc_out(bp, CD180_IER, rp->IER);
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- timeout = jiffies + HZ;
- while (rp->IER & IER_TXEMPTY) {
- spin_unlock_irqrestore(&riscom_lock, flags);
- msleep_interruptible(jiffies_to_msecs(rp->timeout));
- spin_lock_irqsave(&riscom_lock, flags);
- if (time_after(jiffies, timeout))
- break;
- }
- rc_shutdown_port(port->tty, bp, rp);
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_close(struct tty_struct *tty, struct file *filp)
-{
- struct riscom_port *port = tty->driver_data;
-
- if (!port || rc_paranoia_check(port, tty->name, "close"))
- return;
- tty_port_close(&port->port, tty, filp);
-}
-
-static int rc_write(struct tty_struct *tty,
- const unsigned char *buf, int count)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- int c, total = 0;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_write"))
- return 0;
-
- bp = port_Board(port);
-
- while (1) {
- spin_lock_irqsave(&riscom_lock, flags);
-
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
- if (c <= 0)
- break; /* lock continues to be held */
-
- memcpy(port->port.xmit_buf + port->xmit_head, buf, c);
- port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- port->xmit_cnt += c;
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
- !(port->IER & IER_TXRDY)) {
- port->IER |= IER_TXRDY;
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_IER, port->IER);
- }
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- return total;
-}
-
-static int rc_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct riscom_port *port = tty->driver_data;
- unsigned long flags;
- int ret = 0;
-
- if (rc_paranoia_check(port, tty->name, "rc_put_char"))
- return 0;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
- goto out;
-
- port->port.xmit_buf[port->xmit_head++] = ch;
- port->xmit_head &= SERIAL_XMIT_SIZE - 1;
- port->xmit_cnt++;
- ret = 1;
-
-out:
- spin_unlock_irqrestore(&riscom_lock, flags);
- return ret;
-}
-
-static void rc_flush_chars(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_flush_chars"))
- return;
-
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped)
- return;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- port->IER |= IER_TXRDY;
- rc_out(port_Board(port), CD180_CAR, port_No(port));
- rc_out(port_Board(port), CD180_IER, port->IER);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static int rc_write_room(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- int ret;
-
- if (rc_paranoia_check(port, tty->name, "rc_write_room"))
- return 0;
-
- ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-}
-
-static int rc_chars_in_buffer(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
-
- if (rc_paranoia_check(port, tty->name, "rc_chars_in_buffer"))
- return 0;
-
- return port->xmit_cnt;
-}
-
-static int rc_tiocmget(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned char status;
- unsigned int result;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, __func__))
- return -ENODEV;
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- rc_out(bp, CD180_CAR, port_No(port));
- status = rc_in(bp, CD180_MSVR);
- result = rc_in(bp, RC_RI) & (1u << port_No(port)) ? 0 : TIOCM_RNG;
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- result |= ((status & MSVR_RTS) ? TIOCM_RTS : 0)
- | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
- | ((status & MSVR_CD) ? TIOCM_CAR : 0)
- | ((status & MSVR_DSR) ? TIOCM_DSR : 0)
- | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
- return result;
-}
-
-static int rc_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct riscom_port *port = tty->driver_data;
- unsigned long flags;
- struct riscom_board *bp;
-
- if (rc_paranoia_check(port, tty->name, __func__))
- return -ENODEV;
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- if (set & TIOCM_RTS)
- port->MSVR |= MSVR_RTS;
- if (set & TIOCM_DTR)
- bp->DTR &= ~(1u << port_No(port));
-
- if (clear & TIOCM_RTS)
- port->MSVR &= ~MSVR_RTS;
- if (clear & TIOCM_DTR)
- bp->DTR |= (1u << port_No(port));
-
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_MSVR, port->MSVR);
- rc_out(bp, RC_DTR, bp->DTR);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- return 0;
-}
-
-static int rc_send_break(struct tty_struct *tty, int length)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp = port_Board(port);
- unsigned long flags;
-
- if (length == 0 || length == -1)
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- port->break_length = RISCOM_TPS / HZ * length;
- port->COR2 |= COR2_ETC;
- port->IER |= IER_TXRDY;
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_COR2, port->COR2);
- rc_out(bp, CD180_IER, port->IER);
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_CORCHG2);
- rc_wait_CCR(bp);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
- return 0;
-}
-
-static int rc_set_serial_info(struct tty_struct *tty, struct riscom_port *port,
- struct serial_struct __user *newinfo)
-{
- struct serial_struct tmp;
- struct riscom_board *bp = port_Board(port);
- int change_speed;
-
- if (copy_from_user(&tmp, newinfo, sizeof(tmp)))
- return -EFAULT;
-
- mutex_lock(&port->port.mutex);
- change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
- (tmp.flags & ASYNC_SPD_MASK));
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((tmp.close_delay != port->port.close_delay) ||
- (tmp.closing_wait != port->port.closing_wait) ||
- ((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK))) {
- mutex_unlock(&port->port.mutex);
- return -EPERM;
- }
- port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
- (tmp.flags & ASYNC_USR_MASK));
- } else {
- port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
- (tmp.flags & ASYNC_FLAGS));
- port->port.close_delay = tmp.close_delay;
- port->port.closing_wait = tmp.closing_wait;
- }
- if (change_speed) {
- unsigned long flags;
-
- spin_lock_irqsave(&riscom_lock, flags);
- rc_change_speed(tty, bp, port);
- spin_unlock_irqrestore(&riscom_lock, flags);
- }
- mutex_unlock(&port->port.mutex);
- return 0;
-}
-
-static int rc_get_serial_info(struct riscom_port *port,
- struct serial_struct __user *retinfo)
-{
- struct serial_struct tmp;
- struct riscom_board *bp = port_Board(port);
-
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = PORT_CIRRUS;
- tmp.line = port - rc_port;
-
- mutex_lock(&port->port.mutex);
- tmp.port = bp->base;
- tmp.irq = bp->irq;
- tmp.flags = port->port.flags;
- tmp.baud_base = (RC_OSCFREQ + CD180_TPC/2) / CD180_TPC;
- tmp.close_delay = port->port.close_delay * HZ/100;
- tmp.closing_wait = port->port.closing_wait * HZ/100;
- mutex_unlock(&port->port.mutex);
- tmp.xmit_fifo_size = CD180_NFIFO;
- return copy_to_user(retinfo, &tmp, sizeof(tmp)) ? -EFAULT : 0;
-}
-
-static int rc_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct riscom_port *port = tty->driver_data;
- void __user *argp = (void __user *)arg;
- int retval;
-
- if (rc_paranoia_check(port, tty->name, "rc_ioctl"))
- return -ENODEV;
-
- switch (cmd) {
- case TIOCGSERIAL:
- retval = rc_get_serial_info(port, argp);
- break;
- case TIOCSSERIAL:
- retval = rc_set_serial_info(tty, port, argp);
- break;
- default:
- retval = -ENOIOCTLCMD;
- }
- return retval;
-}
-
-static void rc_throttle(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_throttle"))
- return;
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
- port->MSVR &= ~MSVR_RTS;
- rc_out(bp, CD180_CAR, port_No(port));
- if (I_IXOFF(tty)) {
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_SSCH2);
- rc_wait_CCR(bp);
- }
- rc_out(bp, CD180_MSVR, port->MSVR);
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_unthrottle(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_unthrottle"))
- return;
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
- port->MSVR |= MSVR_RTS;
- rc_out(bp, CD180_CAR, port_No(port));
- if (I_IXOFF(tty)) {
- rc_wait_CCR(bp);
- rc_out(bp, CD180_CCR, CCR_SSCH1);
- rc_wait_CCR(bp);
- }
- rc_out(bp, CD180_MSVR, port->MSVR);
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_stop(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_stop"))
- return;
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
- port->IER &= ~IER_TXRDY;
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_IER, port->IER);
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_start(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
- struct riscom_board *bp;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_start"))
- return;
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&riscom_lock, flags);
-
- if (port->xmit_cnt && port->port.xmit_buf && !(port->IER & IER_TXRDY)) {
- port->IER |= IER_TXRDY;
- rc_out(bp, CD180_CAR, port_No(port));
- rc_out(bp, CD180_IER, port->IER);
- }
- spin_unlock_irqrestore(&riscom_lock, flags);
-}
-
-static void rc_hangup(struct tty_struct *tty)
-{
- struct riscom_port *port = tty->driver_data;
-
- if (rc_paranoia_check(port, tty->name, "rc_hangup"))
- return;
-
- tty_port_hangup(&port->port);
-}
-
-static void rc_set_termios(struct tty_struct *tty,
- struct ktermios *old_termios)
-{
- struct riscom_port *port = tty->driver_data;
- unsigned long flags;
-
- if (rc_paranoia_check(port, tty->name, "rc_set_termios"))
- return;
-
- spin_lock_irqsave(&riscom_lock, flags);
- rc_change_speed(tty, port_Board(port), port);
- spin_unlock_irqrestore(&riscom_lock, flags);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- rc_start(tty);
- }
-}
-
-static const struct tty_operations riscom_ops = {
- .open = rc_open,
- .close = rc_close,
- .write = rc_write,
- .put_char = rc_put_char,
- .flush_chars = rc_flush_chars,
- .write_room = rc_write_room,
- .chars_in_buffer = rc_chars_in_buffer,
- .flush_buffer = rc_flush_buffer,
- .ioctl = rc_ioctl,
- .throttle = rc_throttle,
- .unthrottle = rc_unthrottle,
- .set_termios = rc_set_termios,
- .stop = rc_stop,
- .start = rc_start,
- .hangup = rc_hangup,
- .tiocmget = rc_tiocmget,
- .tiocmset = rc_tiocmset,
- .break_ctl = rc_send_break,
-};
-
-static const struct tty_port_operations riscom_port_ops = {
- .carrier_raised = carrier_raised,
- .dtr_rts = dtr_rts,
- .shutdown = rc_close_port,
- .activate = rc_activate_port,
-};
-
-
-static int __init rc_init_drivers(void)
-{
- int error;
- int i;
-
- riscom_driver = alloc_tty_driver(RC_NBOARD * RC_NPORT);
- if (!riscom_driver)
- return -ENOMEM;
-
- riscom_driver->owner = THIS_MODULE;
- riscom_driver->name = "ttyL";
- riscom_driver->major = RISCOM8_NORMAL_MAJOR;
- riscom_driver->type = TTY_DRIVER_TYPE_SERIAL;
- riscom_driver->subtype = SERIAL_TYPE_NORMAL;
- riscom_driver->init_termios = tty_std_termios;
- riscom_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- riscom_driver->init_termios.c_ispeed = 9600;
- riscom_driver->init_termios.c_ospeed = 9600;
- riscom_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_HARDWARE_BREAK;
- tty_set_operations(riscom_driver, &riscom_ops);
- error = tty_register_driver(riscom_driver);
- if (error != 0) {
- put_tty_driver(riscom_driver);
- printk(KERN_ERR "rc: Couldn't register RISCom/8 driver, "
- "error = %d\n", error);
- return 1;
- }
- memset(rc_port, 0, sizeof(rc_port));
- for (i = 0; i < RC_NPORT * RC_NBOARD; i++) {
- tty_port_init(&rc_port[i].port);
- rc_port[i].port.ops = &riscom_port_ops;
- rc_port[i].magic = RISCOM8_MAGIC;
- }
- return 0;
-}
-
-static void rc_release_drivers(void)
-{
- tty_unregister_driver(riscom_driver);
- put_tty_driver(riscom_driver);
-}
-
-#ifndef MODULE
-/*
- * Called at boot time.
- *
- * You can specify IO base for up to RC_NBOARD cards,
- * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt.
- * Note that there will be no probing at default
- * addresses in this case.
- *
- */
-static int __init riscom8_setup(char *str)
-{
- int ints[RC_NBOARD];
- int i;
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- for (i = 0; i < RC_NBOARD; i++) {
- if (i < ints[0])
- rc_board[i].base = ints[i+1];
- else
- rc_board[i].base = 0;
- }
- return 1;
-}
-
-__setup("riscom8=", riscom8_setup);
-#endif
-
-static char banner[] __initdata =
- KERN_INFO "rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin "
- "1994-1996.\n";
-static char no_boards_msg[] __initdata =
- KERN_INFO "rc: No RISCom/8 boards detected.\n";
-
-/*
- * This routine must be called by kernel at boot time
- */
-static int __init riscom8_init(void)
-{
- int i;
- int found = 0;
-
- printk(banner);
-
- if (rc_init_drivers())
- return -EIO;
-
- for (i = 0; i < RC_NBOARD; i++)
- if (rc_board[i].base && !rc_probe(&rc_board[i]))
- found++;
- if (!found) {
- rc_release_drivers();
- printk(no_boards_msg);
- return -EIO;
- }
- return 0;
-}
-
-#ifdef MODULE
-static int iobase;
-static int iobase1;
-static int iobase2;
-static int iobase3;
-module_param(iobase, int, 0);
-module_param(iobase1, int, 0);
-module_param(iobase2, int, 0);
-module_param(iobase3, int, 0);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(RISCOM8_NORMAL_MAJOR);
-#endif /* MODULE */
-
-/*
- * You can setup up to 4 boards (current value of RC_NBOARD)
- * by specifying "iobase=0xXXX iobase1=0xXXX ..." as insmod parameter.
- *
- */
-static int __init riscom8_init_module(void)
-{
-#ifdef MODULE
- int i;
-
- if (iobase || iobase1 || iobase2 || iobase3) {
- for (i = 0; i < RC_NBOARD; i++)
- rc_board[i].base = 0;
- }
-
- if (iobase)
- rc_board[0].base = iobase;
- if (iobase1)
- rc_board[1].base = iobase1;
- if (iobase2)
- rc_board[2].base = iobase2;
- if (iobase3)
- rc_board[3].base = iobase3;
-#endif /* MODULE */
-
- return riscom8_init();
-}
-
-static void __exit riscom8_exit_module(void)
-{
- int i;
-
- rc_release_drivers();
- for (i = 0; i < RC_NBOARD; i++)
- if (rc_board[i].flags & RC_BOARD_PRESENT)
- rc_release_io_range(&rc_board[i]);
-
-}
-
-module_init(riscom8_init_module);
-module_exit(riscom8_exit_module);
diff --git a/drivers/char/riscom8.h b/drivers/char/riscom8.h
deleted file mode 100644
index c9876b3..0000000
--- a/drivers/char/riscom8.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * linux/drivers/char/riscom8.h -- RISCom/8 multiport serial driver.
- *
- * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- * This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others. The RISCom/8 card
- * programming info was obtained from various drivers for other OSes
- * (FreeBSD, ISC, etc), but no source code from those drivers were
- * directly included in this driver.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __LINUX_RISCOM8_H
-#define __LINUX_RISCOM8_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-#define RC_NBOARD 4
-/* NOTE: RISCom decoder recognizes 16 addresses... */
-#define RC_NPORT 8
-#define RC_BOARD(line) (((line) >> 3) & 0x07)
-#define RC_PORT(line) ((line) & (RC_NPORT - 1))
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define RISCOM_TPS 4000
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define RISCOM_RXFIFO 6 /* Max. receiver FIFO size (1-8) */
-
-#define RISCOM8_MAGIC 0x0907
-
-#define RC_IOBASE1 0x220
-#define RC_IOBASE2 0x240
-#define RC_IOBASE3 0x250
-#define RC_IOBASE4 0x260
-
-struct riscom_board {
- unsigned long flags;
- unsigned short base;
- unsigned char irq;
- signed char count;
- unsigned char DTR;
-};
-
-#define RC_BOARD_PRESENT 0x00000001
-#define RC_BOARD_ACTIVE 0x00000002
-
-struct riscom_port {
- int magic;
- struct tty_port port;
- int baud_base;
- int timeout;
- int custom_divisor;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- short wakeup_chars;
- short break_length;
- unsigned char mark_mask;
- unsigned char IER;
- unsigned char MSVR;
- unsigned char COR2;
-#ifdef RC_REPORT_OVERRUN
- unsigned long overrun;
-#endif
-#ifdef RC_REPORT_FIFO
- unsigned long hits[10];
-#endif
-};
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_RISCOM8_H */
diff --git a/drivers/char/riscom8_reg.h b/drivers/char/riscom8_reg.h
deleted file mode 100644
index a32475e..0000000
--- a/drivers/char/riscom8_reg.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * linux/drivers/char/riscom8_reg.h -- RISCom/8 multiport serial driver.
- */
-
-/*
- * Definitions for RISCom/8 Async Mux card by SDL Communications, Inc.
- */
-
-/*
- * Address mapping between Cirrus Logic CD180 chip internal registers
- * and ISA port addresses:
- *
- * CL-CD180 A6 A5 A4 A3 A2 A1 A0
- * ISA A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 A0
- */
-#define RC_TO_ISA(r) ((((r)&0x07)<<1) | (((r)&~0x07)<<7))
-
-
-/* RISCom/8 On-Board Registers (assuming address translation) */
-
-#define RC_RI 0x100 /* Ring Indicator Register (R/O) */
-#define RC_DTR 0x100 /* DTR Register (W/O) */
-#define RC_BSR 0x101 /* Board Status Register (R/O) */
-#define RC_CTOUT 0x101 /* Clear Timeout (W/O) */
-
-
-/* Board Status Register */
-
-#define RC_BSR_TOUT 0x08 /* Hardware Timeout */
-#define RC_BSR_RINT 0x04 /* Receiver Interrupt */
-#define RC_BSR_TINT 0x02 /* Transmitter Interrupt */
-#define RC_BSR_MINT 0x01 /* Modem Ctl Interrupt */
-
-
-/* On-board oscillator frequency (in Hz) */
-#define RC_OSCFREQ 9830400
-
-/* Values of choice for Interrupt ACKs */
-#define RC_ACK_MINT 0x81 /* goes to PILR1 */
-#define RC_ACK_RINT 0x82 /* goes to PILR3 */
-#define RC_ACK_TINT 0x84 /* goes to PILR2 */
-
-/* Chip ID (sorry, only one chip now) */
-#define RC_ID 0x10
-
-/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */
-
-#define CD180_NCH 8 /* Total number of channels */
-#define CD180_TPC 16 /* Ticks per character */
-#define CD180_NFIFO 8 /* TX FIFO size */
-
-
-/* Global registers */
-
-#define CD180_GIVR 0x40 /* Global Interrupt Vector Register */
-#define CD180_GICR 0x41 /* Global Interrupting Channel Register */
-#define CD180_PILR1 0x61 /* Priority Interrupt Level Register 1 */
-#define CD180_PILR2 0x62 /* Priority Interrupt Level Register 2 */
-#define CD180_PILR3 0x63 /* Priority Interrupt Level Register 3 */
-#define CD180_CAR 0x64 /* Channel Access Register */
-#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */
-#define CD180_PPRH 0x70 /* Prescaler Period Register High */
-#define CD180_PPRL 0x71 /* Prescaler Period Register Low */
-#define CD180_RDR 0x78 /* Receiver Data Register */
-#define CD180_RCSR 0x7a /* Receiver Character Status Register */
-#define CD180_TDR 0x7b /* Transmit Data Register */
-#define CD180_EOIR 0x7f /* End of Interrupt Register */
-
-
-/* Channel Registers */
-
-#define CD180_CCR 0x01 /* Channel Command Register */
-#define CD180_IER 0x02 /* Interrupt Enable Register */
-#define CD180_COR1 0x03 /* Channel Option Register 1 */
-#define CD180_COR2 0x04 /* Channel Option Register 2 */
-#define CD180_COR3 0x05 /* Channel Option Register 3 */
-#define CD180_CCSR 0x06 /* Channel Control Status Register */
-#define CD180_RDCR 0x07 /* Receive Data Count Register */
-#define CD180_SCHR1 0x09 /* Special Character Register 1 */
-#define CD180_SCHR2 0x0a /* Special Character Register 2 */
-#define CD180_SCHR3 0x0b /* Special Character Register 3 */
-#define CD180_SCHR4 0x0c /* Special Character Register 4 */
-#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */
-#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */
-#define CD180_MCR 0x12 /* Modem Change Register */
-#define CD180_RTPR 0x18 /* Receive Timeout Period Register */
-#define CD180_MSVR 0x28 /* Modem Signal Value Register */
-#define CD180_RBPRH 0x31 /* Receive Baud Rate Period Register High */
-#define CD180_RBPRL 0x32 /* Receive Baud Rate Period Register Low */
-#define CD180_TBPRH 0x39 /* Transmit Baud Rate Period Register High */
-#define CD180_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */
-
-
-/* Global Interrupt Vector Register (R/W) */
-
-#define GIVR_ITMASK 0x07 /* Interrupt type mask */
-#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */
-#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */
-#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */
-#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */
-
-
-/* Global Interrupt Channel Register (R/W) */
-
-#define GICR_CHAN 0x1c /* Channel Number Mask */
-#define GICR_CHAN_OFF 2 /* Channel Number Offset */
-
-
-/* Channel Address Register (R/W) */
-
-#define CAR_CHAN 0x07 /* Channel Number Mask */
-#define CAR_A7 0x08 /* A7 Address Extension (unused) */
-
-
-/* Receive Character Status Register (R/O) */
-
-#define RCSR_TOUT 0x80 /* Rx Timeout */
-#define RCSR_SCDET 0x70 /* Special Character Detected Mask */
-#define RCSR_NO_SC 0x00 /* No Special Characters Detected */
-#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */
-#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */
-#define RCSR_SC_3 0x30 /* Special Char 3 Detected */
-#define RCSR_SC_4 0x40 /* Special Char 4 Detected */
-#define RCSR_BREAK 0x08 /* Break has been detected */
-#define RCSR_PE 0x04 /* Parity Error */
-#define RCSR_FE 0x02 /* Frame Error */
-#define RCSR_OE 0x01 /* Overrun Error */
-
-
-/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
-
-#define CCR_HARDRESET 0x81 /* Reset the chip */
-
-#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */
-
-#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */
-#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */
-#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */
-
-#define CCR_SSCH1 0x21 /* Send Special Character 1 */
-
-#define CCR_SSCH2 0x22 /* Send Special Character 2 */
-
-#define CCR_SSCH3 0x23 /* Send Special Character 3 */
-
-#define CCR_SSCH4 0x24 /* Send Special Character 4 */
-
-#define CCR_TXEN 0x18 /* Enable Transmitter */
-#define CCR_RXEN 0x12 /* Enable Receiver */
-
-#define CCR_TXDIS 0x14 /* Disable Transmitter */
-#define CCR_RXDIS 0x11 /* Disable Receiver */
-
-
-/* Interrupt Enable Register (R/W) */
-
-#define IER_DSR 0x80 /* Enable interrupt on DSR change */
-#define IER_CD 0x40 /* Enable interrupt on CD change */
-#define IER_CTS 0x20 /* Enable interrupt on CTS change */
-#define IER_RXD 0x10 /* Enable interrupt on Receive Data */
-#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */
-#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */
-#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */
-#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */
-
-
-/* Channel Option Register 1 (R/W) */
-
-#define COR1_ODDP 0x80 /* Odd Parity */
-#define COR1_PARMODE 0x60 /* Parity Mode mask */
-#define COR1_NOPAR 0x00 /* No Parity */
-#define COR1_FORCEPAR 0x20 /* Force Parity */
-#define COR1_NORMPAR 0x40 /* Normal Parity */
-#define COR1_IGNORE 0x10 /* Ignore Parity on RX */
-#define COR1_STOPBITS 0x0c /* Number of Stop Bits */
-#define COR1_1SB 0x00 /* 1 Stop Bit */
-#define COR1_15SB 0x04 /* 1.5 Stop Bits */
-#define COR1_2SB 0x08 /* 2 Stop Bits */
-#define COR1_CHARLEN 0x03 /* Character Length */
-#define COR1_5BITS 0x00 /* 5 bits */
-#define COR1_6BITS 0x01 /* 6 bits */
-#define COR1_7BITS 0x02 /* 7 bits */
-#define COR1_8BITS 0x03 /* 8 bits */
-
-
-/* Channel Option Register 2 (R/W) */
-
-#define COR2_IXM 0x80 /* Implied XON mode */
-#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */
-#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */
-#define COR2_LLM 0x10 /* Local Loopback Mode */
-#define COR2_RLM 0x08 /* Remote Loopback Mode */
-#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */
-#define COR2_CTSAE 0x02 /* CTS Automatic Enable */
-#define COR2_DSRAE 0x01 /* DSR Automatic Enable */
-
-
-/* Channel Option Register 3 (R/W) */
-
-#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */
-#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */
-#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */
-#define COR3_SCDE 0x10 /* Special Character Detection Enable */
-#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */
-
-
-/* Channel Control Status Register (R/O) */
-
-#define CCSR_RXEN 0x80 /* Receiver Enabled */
-#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */
-#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */
-#define CCSR_TXEN 0x08 /* Transmitter Enabled */
-#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */
-#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */
-
-
-/* Modem Change Option Register 1 (R/W) */
-
-#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */
-#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */
-#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */
-#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */
-#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */
-
-
-/* Modem Change Option Register 2 (R/W) */
-
-#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */
-#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */
-#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */
-
-
-/* Modem Change Register (R/W) */
-
-#define MCR_DSRCHG 0x80 /* DSR Changed */
-#define MCR_CDCHG 0x40 /* CD Changed */
-#define MCR_CTSCHG 0x20 /* CTS Changed */
-
-
-/* Modem Signal Value Register (R/W) */
-
-#define MSVR_DSR 0x80 /* Current state of DSR input */
-#define MSVR_CD 0x40 /* Current state of CD input */
-#define MSVR_CTS 0x20 /* Current state of CTS input */
-#define MSVR_DTR 0x02 /* Current state of DTR output */
-#define MSVR_RTS 0x01 /* Current state of RTS output */
-
-
-/* Escape characters */
-
-#define CD180_C_ESC 0x00 /* Escape character */
-#define CD180_C_SBRK 0x81 /* Start sending BREAK */
-#define CD180_C_DELAY 0x82 /* Delay output */
-#define CD180_C_EBRK 0x83 /* Stop sending BREAK */
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
deleted file mode 100644
index 674af69..0000000
--- a/drivers/char/serial167.c
+++ /dev/null
@@ -1,2489 +0,0 @@
-/*
- * linux/drivers/char/serial167.c
- *
- * Driver for MVME166/7 board serial ports, which are via a CD2401.
- * Based very much on cyclades.c.
- *
- * MVME166/7 work by Richard Hirst [richard@sleepie.demon.co.uk]
- *
- * ==============================================================
- *
- * static char rcsid[] =
- * "$Revision: 1.36.1.4 $$Date: 1995/03/29 06:14:14 $";
- *
- * linux/kernel/cyclades.c
- *
- * Maintained by Marcio Saito (cyclades@netcom.com) and
- * Randolph Bentson (bentson@grieg.seaslug.org)
- *
- * Much of the design and some of the code came from serial.c
- * which was copyright (C) 1991, 1992 Linus Torvalds. It was
- * extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92,
- * and then fixed as suggested by Michael K. Johnson 12/12/92.
- *
- * This version does not support shared irq's.
- *
- * $Log: cyclades.c,v $
- * Revision 1.36.1.4 1995/03/29 06:14:14 bentson
- * disambiguate between Cyclom-16Y and Cyclom-32Ye;
- *
- * Changes:
- *
- * 200 lines of changes record removed - RGH 11-10-95, starting work on
- * converting this to drive serial ports on mvme166 (cd2401).
- *
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 2000/08/25
- * - get rid of verify_area
- * - use get_user to access memory from userspace in set_threshold,
- * set_default_threshold and set_timeout
- * - don't use the panic function in serial167_init
- * - do resource release on failure on serial167_init
- * - include missing restore_flags in mvme167_serial_console_setup
- *
- * Kars de Jong <jongk@linux-m68k.org> - 2004/09/06
- * - replace bottom half handler with task queue handler
- */
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/tty.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/serial167.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/tty_flip.h>
-#include <linux/gfp.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/mvme16xhw.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/uaccess.h>
-#include <linux/init.h>
-
-#define SERIAL_PARANOIA_CHECK
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_THROTTLE
-#undef SERIAL_DEBUG_OTHER
-#undef SERIAL_DEBUG_IO
-#undef SERIAL_DEBUG_COUNT
-#undef SERIAL_DEBUG_DTR
-#undef CYCLOM_16Y_HACK
-#define CYCLOM_ENABLE_MONITORING
-
-#define WAKEUP_CHARS 256
-
-#define STD_COM_FLAGS (0)
-
-static struct tty_driver *cy_serial_driver;
-extern int serial_console;
-static struct cyclades_port *serial_console_info = NULL;
-static unsigned int serial_console_cflag = 0;
-u_char initial_console_speed;
-
-/* Base address of cd2401 chip on mvme166/7 */
-
-#define BASE_ADDR (0xfff45000)
-#define pcc2chip ((volatile u_char *)0xfff42000)
-#define PccSCCMICR 0x1d
-#define PccSCCTICR 0x1e
-#define PccSCCRICR 0x1f
-#define PccTPIACKR 0x25
-#define PccRPIACKR 0x27
-#define PccIMLR 0x3f
-
-/* This is the per-port data structure */
-struct cyclades_port cy_port[] = {
- /* CARD# */
- {-1}, /* ttyS0 */
- {-1}, /* ttyS1 */
- {-1}, /* ttyS2 */
- {-1}, /* ttyS3 */
-};
-
-#define NR_PORTS ARRAY_SIZE(cy_port)
-
-/*
- * This is used to look up the divisor speeds and the timeouts
- * We're normally limited to 15 distinct baud rates. The extra
- * are accessed via settings in info->flags.
- * 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
- * 10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
- * HI VHI
- */
-static int baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200,
- 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200, 150000,
- 0
-};
-
-#if 0
-static char baud_co[] = { /* 25 MHz clock option table */
- /* value => 00 01 02 03 04 */
- /* divide by 8 32 128 512 2048 */
- 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x03, 0x03, 0x03, 0x02,
- 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static char baud_bpr[] = { /* 25 MHz baud rate period table */
- 0x00, 0xf5, 0xa3, 0x6f, 0x5c, 0x51, 0xf5, 0xa3, 0x51, 0xa3,
- 0x6d, 0x51, 0xa3, 0x51, 0xa3, 0x51, 0x36, 0x29, 0x1b, 0x15
-};
-#endif
-
-/* I think 166 brd clocks 2401 at 20MHz.... */
-
-/* These values are written directly to tcor, and >> 5 for writing to rcor */
-static u_char baud_co[] = { /* 20 MHz clock option table */
- 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x60, 0x60, 0x40,
- 0x40, 0x40, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* These values written directly to tbpr/rbpr */
-static u_char baud_bpr[] = { /* 20 MHz baud rate period table */
- 0x00, 0xc0, 0x80, 0x58, 0x6c, 0x40, 0xc0, 0x81, 0x40, 0x81,
- 0x57, 0x40, 0x81, 0x40, 0x81, 0x40, 0x2b, 0x20, 0x15, 0x10
-};
-
-static u_char baud_cor4[] = { /* receive threshold */
- 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a,
- 0x0a, 0x0a, 0x0a, 0x09, 0x09, 0x08, 0x08, 0x08, 0x08, 0x07
-};
-
-static void shutdown(struct cyclades_port *);
-static int startup(struct cyclades_port *);
-static void cy_throttle(struct tty_struct *);
-static void cy_unthrottle(struct tty_struct *);
-static void config_setup(struct cyclades_port *);
-#ifdef CYCLOM_SHOW_STATUS
-static void show_status(int);
-#endif
-
-/*
- * I have my own version of udelay(), as it is needed when initialising
- * the chip, before the delay loop has been calibrated. Should probably
- * reference one of the vmechip2 or pccchip2 counter for an accurate
- * delay, but this wild guess will do for now.
- */
-
-void my_udelay(long us)
-{
- u_char x;
- volatile u_char *p = &x;
- int i;
-
- while (us--)
- for (i = 100; i; i--)
- x |= *p;
-}
-
-static inline int serial_paranoia_check(struct cyclades_port *info, char *name,
- const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
- if (!info) {
- printk("Warning: null cyclades_port for (%s) in %s\n", name,
- routine);
- return 1;
- }
-
- if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
- printk("Warning: cyclades_port out of range for (%s) in %s\n",
- name, routine);
- return 1;
- }
-
- if (info->magic != CYCLADES_MAGIC) {
- printk("Warning: bad magic number for serial struct (%s) in "
- "%s\n", name, routine);
- return 1;
- }
-#endif
- return 0;
-} /* serial_paranoia_check */
-
-#if 0
-/* The following diagnostic routines allow the driver to spew
- information on the screen, even (especially!) during interrupts.
- */
-void SP(char *data)
-{
- unsigned long flags;
- local_irq_save(flags);
- printk(KERN_EMERG "%s", data);
- local_irq_restore(flags);
-}
-
-char scrn[2];
-void CP(char data)
-{
- unsigned long flags;
- local_irq_save(flags);
- scrn[0] = data;
- printk(KERN_EMERG "%c", scrn);
- local_irq_restore(flags);
-} /* CP */
-
-void CP1(int data)
-{
- (data < 10) ? CP(data + '0') : CP(data + 'A' - 10);
-} /* CP1 */
-void CP2(int data)
-{
- CP1((data >> 4) & 0x0f);
- CP1(data & 0x0f);
-} /* CP2 */
-void CP4(int data)
-{
- CP2((data >> 8) & 0xff);
- CP2(data & 0xff);
-} /* CP4 */
-void CP8(long data)
-{
- CP4((data >> 16) & 0xffff);
- CP4(data & 0xffff);
-} /* CP8 */
-#endif
-
-/* This routine waits up to 1000 micro-seconds for the previous
- command to the Cirrus chip to complete and then issues the
- new command. An error is returned if the previous command
- didn't finish within the time limit.
- */
-u_short write_cy_cmd(volatile u_char * base_addr, u_char cmd)
-{
- unsigned long flags;
- volatile int i;
-
- local_irq_save(flags);
- /* Check to see that the previous command has completed */
- for (i = 0; i < 100; i++) {
- if (base_addr[CyCCR] == 0) {
- break;
- }
- my_udelay(10L);
- }
- /* if the CCR never cleared, the previous command
- didn't finish within the "reasonable time" */
- if (i == 10) {
- local_irq_restore(flags);
- return (-1);
- }
-
- /* Issue the new command */
- base_addr[CyCCR] = cmd;
- local_irq_restore(flags);
- return (0);
-} /* write_cy_cmd */
-
-/* cy_start and cy_stop provide software output flow control as a
- function of XON/XOFF, software CTS, and other such stuff. */
-
-static void cy_stop(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_stop %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_stop"))
- return;
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) (channel); /* index channel */
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- local_irq_restore(flags);
-} /* cy_stop */
-
-static void cy_start(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_start %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_start"))
- return;
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) (channel);
- base_addr[CyIER] |= CyTxMpty;
- local_irq_restore(flags);
-} /* cy_start */
-
-/* The real interrupt service routines are called
- whenever the card wants its hand held--chars
- received, out buffer empty, modem change, etc.
- */
-static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id)
-{
- struct tty_struct *tty;
- struct cyclades_port *info;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- unsigned char err, rfoc;
- int channel;
- char data;
-
- /* determine the channel and change to that context */
- channel = (u_short) (base_addr[CyLICR] >> 2);
- info = &cy_port[channel];
- info->last_active = jiffies;
-
- if ((err = base_addr[CyRISR]) & CyTIMEOUT) {
- /* This is a receive timeout interrupt, ignore it */
- base_addr[CyREOIR] = CyNOTRANS;
- return IRQ_HANDLED;
- }
-
- /* Read a byte of data if there is any - assume the error
- * is associated with this character */
-
- if ((rfoc = base_addr[CyRFOC]) != 0)
- data = base_addr[CyRDR];
- else
- data = 0;
-
- /* if there is nowhere to put the data, discard it */
- if (info->tty == 0) {
- base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
- return IRQ_HANDLED;
- } else { /* there is an open port for this data */
- tty = info->tty;
- if (err & info->ignore_status_mask) {
- base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
- return IRQ_HANDLED;
- }
- if (tty_buffer_request_room(tty, 1) != 0) {
- if (err & info->read_status_mask) {
- if (err & CyBREAK) {
- tty_insert_flip_char(tty, data,
- TTY_BREAK);
- if (info->flags & ASYNC_SAK) {
- do_SAK(tty);
- }
- } else if (err & CyFRAME) {
- tty_insert_flip_char(tty, data,
- TTY_FRAME);
- } else if (err & CyPARITY) {
- tty_insert_flip_char(tty, data,
- TTY_PARITY);
- } else if (err & CyOVERRUN) {
- tty_insert_flip_char(tty, 0,
- TTY_OVERRUN);
- /*
- If the flip buffer itself is
- overflowing, we still lose
- the next incoming character.
- */
- if (tty_buffer_request_room(tty, 1) !=
- 0) {
- tty_insert_flip_char(tty, data,
- TTY_FRAME);
- }
- /* These two conditions may imply */
- /* a normal read should be done. */
- /* else if(data & CyTIMEOUT) */
- /* else if(data & CySPECHAR) */
- } else {
- tty_insert_flip_char(tty, 0,
- TTY_NORMAL);
- }
- } else {
- tty_insert_flip_char(tty, data, TTY_NORMAL);
- }
- } else {
- /* there was a software buffer overrun
- and nothing could be done about it!!! */
- }
- }
- tty_schedule_flip(tty);
- /* end of service */
- base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
- return IRQ_HANDLED;
-} /* cy_rxerr_interrupt */
-
-static irqreturn_t cd2401_modem_interrupt(int irq, void *dev_id)
-{
- struct cyclades_port *info;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
- int mdm_change;
- int mdm_status;
-
- /* determine the channel and change to that context */
- channel = (u_short) (base_addr[CyLICR] >> 2);
- info = &cy_port[channel];
- info->last_active = jiffies;
-
- mdm_change = base_addr[CyMISR];
- mdm_status = base_addr[CyMSVR1];
-
- if (info->tty == 0) { /* nowhere to put the data, ignore it */
- ;
- } else {
- if ((mdm_change & CyDCD)
- && (info->flags & ASYNC_CHECK_CD)) {
- if (mdm_status & CyDCD) {
-/* CP('!'); */
- wake_up_interruptible(&info->open_wait);
- } else {
-/* CP('@'); */
- tty_hangup(info->tty);
- wake_up_interruptible(&info->open_wait);
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- }
- }
- if ((mdm_change & CyCTS)
- && (info->flags & ASYNC_CTS_FLOW)) {
- if (info->tty->stopped) {
- if (mdm_status & CyCTS) {
- /* !!! cy_start isn't used because... */
- info->tty->stopped = 0;
- base_addr[CyIER] |= CyTxMpty;
- tty_wakeup(info->tty);
- }
- } else {
- if (!(mdm_status & CyCTS)) {
- /* !!! cy_stop isn't used because... */
- info->tty->stopped = 1;
- base_addr[CyIER] &=
- ~(CyTxMpty | CyTxRdy);
- }
- }
- }
- if (mdm_status & CyDSR) {
- }
- }
- base_addr[CyMEOIR] = 0;
- return IRQ_HANDLED;
-} /* cy_modem_interrupt */
-
-static irqreturn_t cd2401_tx_interrupt(int irq, void *dev_id)
-{
- struct cyclades_port *info;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
- int char_count, saved_cnt;
- int outch;
-
- /* determine the channel and change to that context */
- channel = (u_short) (base_addr[CyLICR] >> 2);
-
- /* validate the port number (as configured and open) */
- if ((channel < 0) || (NR_PORTS <= channel)) {
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- base_addr[CyTEOIR] = CyNOTRANS;
- return IRQ_HANDLED;
- }
- info = &cy_port[channel];
- info->last_active = jiffies;
- if (info->tty == 0) {
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- base_addr[CyTEOIR] = CyNOTRANS;
- return IRQ_HANDLED;
- }
-
- /* load the on-chip space available for outbound data */
- saved_cnt = char_count = base_addr[CyTFTC];
-
- if (info->x_char) { /* send special char */
- outch = info->x_char;
- base_addr[CyTDR] = outch;
- char_count--;
- info->x_char = 0;
- }
-
- if (info->x_break) {
- /* The Cirrus chip requires the "Embedded Transmit
- Commands" of start break, delay, and end break
- sequences to be sent. The duration of the
- break is given in TICs, which runs at HZ
- (typically 100) and the PPR runs at 200 Hz,
- so the delay is duration * 200/HZ, and thus a
- break can run from 1/100 sec to about 5/4 sec.
- Need to check these values - RGH 141095.
- */
- base_addr[CyTDR] = 0; /* start break */
- base_addr[CyTDR] = 0x81;
- base_addr[CyTDR] = 0; /* delay a bit */
- base_addr[CyTDR] = 0x82;
- base_addr[CyTDR] = info->x_break * 200 / HZ;
- base_addr[CyTDR] = 0; /* terminate break */
- base_addr[CyTDR] = 0x83;
- char_count -= 7;
- info->x_break = 0;
- }
-
- while (char_count > 0) {
- if (!info->xmit_cnt) {
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- break;
- }
- if (info->xmit_buf == 0) {
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- break;
- }
- if (info->tty->stopped || info->tty->hw_stopped) {
- base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
- break;
- }
- /* Because the Embedded Transmit Commands have been
- enabled, we must check to see if the escape
- character, NULL, is being sent. If it is, we
- must ensure that there is room for it to be
- doubled in the output stream. Therefore we
- no longer advance the pointer when the character
- is fetched, but rather wait until after the check
- for a NULL output character. (This is necessary
- because there may not be room for the two chars
- needed to send a NULL.
- */
- outch = info->xmit_buf[info->xmit_tail];
- if (outch) {
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (PAGE_SIZE - 1);
- base_addr[CyTDR] = outch;
- char_count--;
- } else {
- if (char_count > 1) {
- info->xmit_cnt--;
- info->xmit_tail = (info->xmit_tail + 1)
- & (PAGE_SIZE - 1);
- base_addr[CyTDR] = outch;
- base_addr[CyTDR] = 0;
- char_count--;
- char_count--;
- } else {
- break;
- }
- }
- }
-
- if (info->xmit_cnt < WAKEUP_CHARS)
- tty_wakeup(info->tty);
-
- base_addr[CyTEOIR] = (char_count != saved_cnt) ? 0 : CyNOTRANS;
- return IRQ_HANDLED;
-} /* cy_tx_interrupt */
-
-static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id)
-{
- struct tty_struct *tty;
- struct cyclades_port *info;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
- char data;
- int char_count;
- int save_cnt;
-
- /* determine the channel and change to that context */
- channel = (u_short) (base_addr[CyLICR] >> 2);
- info = &cy_port[channel];
- info->last_active = jiffies;
- save_cnt = char_count = base_addr[CyRFOC];
-
- /* if there is nowhere to put the data, discard it */
- if (info->tty == 0) {
- while (char_count--) {
- data = base_addr[CyRDR];
- }
- } else { /* there is an open port for this data */
- tty = info->tty;
- /* load # characters available from the chip */
-
-#ifdef CYCLOM_ENABLE_MONITORING
- ++info->mon.int_count;
- info->mon.char_count += char_count;
- if (char_count > info->mon.char_max)
- info->mon.char_max = char_count;
- info->mon.char_last = char_count;
-#endif
- while (char_count--) {
- data = base_addr[CyRDR];
- tty_insert_flip_char(tty, data, TTY_NORMAL);
-#ifdef CYCLOM_16Y_HACK
- udelay(10L);
-#endif
- }
- tty_schedule_flip(tty);
- }
- /* end of service */
- base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS;
- return IRQ_HANDLED;
-} /* cy_rx_interrupt */
-
-/* This is called whenever a port becomes active;
- interrupts are enabled and DTR & RTS are turned on.
- */
-static int startup(struct cyclades_port *info)
-{
- unsigned long flags;
- volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
- int channel;
-
- if (info->flags & ASYNC_INITIALIZED) {
- return 0;
- }
-
- if (!info->type) {
- if (info->tty) {
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- return 0;
- }
- if (!info->xmit_buf) {
- info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
- if (!info->xmit_buf) {
- return -ENOMEM;
- }
- }
-
- config_setup(info);
-
- channel = info->line;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("startup channel %d\n", channel);
-#endif
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
-
- base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */
- base_addr[CyMSVR1] = CyRTS;
-/* CP('S');CP('1'); */
- base_addr[CyMSVR2] = CyDTR;
-
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
-
- base_addr[CyIER] |= CyRxData;
- info->flags |= ASYNC_INITIALIZED;
-
- if (info->tty) {
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
- local_irq_restore(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk(" done\n");
-#endif
- return 0;
-} /* startup */
-
-void start_xmit(struct cyclades_port *info)
-{
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
-
- channel = info->line;
- local_irq_save(flags);
- base_addr[CyCAR] = channel;
- base_addr[CyIER] |= CyTxMpty;
- local_irq_restore(flags);
-} /* start_xmit */
-
-/*
- * This routine shuts down a serial port; interrupts are disabled,
- * and DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct cyclades_port *info)
-{
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
-
- if (!(info->flags & ASYNC_INITIALIZED)) {
-/* CP('$'); */
- return;
- }
-
- channel = info->line;
-
-#ifdef SERIAL_DEBUG_OPEN
- printk("shutdown channel %d\n", channel);
-#endif
-
- /* !!! REALLY MUST WAIT FOR LAST CHARACTER TO BE
- SENT BEFORE DROPPING THE LINE !!! (Perhaps
- set some flag that is read when XMTY happens.)
- Other choices are to delay some fixed interval
- or schedule some later processing.
- */
- local_irq_save(flags);
- if (info->xmit_buf) {
- free_page((unsigned long)info->xmit_buf);
- info->xmit_buf = NULL;
- }
-
- base_addr[CyCAR] = (u_char) channel;
- if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
- base_addr[CyMSVR1] = 0;
-/* CP('C');CP('1'); */
- base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- }
- write_cy_cmd(base_addr, CyDIS_RCVR);
- /* it may be appropriate to clear _XMIT at
- some later date (after testing)!!! */
-
- if (info->tty) {
- set_bit(TTY_IO_ERROR, &info->tty->flags);
- }
- info->flags &= ~ASYNC_INITIALIZED;
- local_irq_restore(flags);
-
-#ifdef SERIAL_DEBUG_OPEN
- printk(" done\n");
-#endif
-} /* shutdown */
-
-/*
- * This routine finds or computes the various line characteristics.
- */
-static void config_setup(struct cyclades_port *info)
-{
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
- unsigned cflag;
- int i;
- unsigned char ti, need_init_chan = 0;
-
- if (!info->tty || !info->tty->termios) {
- return;
- }
- if (info->line == -1) {
- return;
- }
- cflag = info->tty->termios->c_cflag;
-
- /* baud rate */
- i = cflag & CBAUD;
-#ifdef CBAUDEX
-/* Starting with kernel 1.1.65, there is direct support for
- higher baud rates. The following code supports those
- changes. The conditional aspect allows this driver to be
- used for earlier as well as later kernel versions. (The
- mapping is slightly different from serial.c because there
- is still the possibility of supporting 75 kbit/sec with
- the Cyclades board.)
- */
- if (i & CBAUDEX) {
- if (i == B57600)
- i = 16;
- else if (i == B115200)
- i = 18;
-#ifdef B78600
- else if (i == B78600)
- i = 17;
-#endif
- else
- info->tty->termios->c_cflag &= ~CBAUDEX;
- }
-#endif
- if (i == 15) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- i += 1;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- i += 3;
- }
- /* Don't ever change the speed of the console port. It will
- * run at the speed specified in bootinfo, or at 19.2K */
- /* Actually, it should run at whatever speed 166Bug was using */
- /* Note info->timeout isn't used at present */
- if (info != serial_console_info) {
- info->tbpr = baud_bpr[i]; /* Tx BPR */
- info->tco = baud_co[i]; /* Tx CO */
- info->rbpr = baud_bpr[i]; /* Rx BPR */
- info->rco = baud_co[i] >> 5; /* Rx CO */
- if (baud_table[i] == 134) {
- info->timeout =
- (info->xmit_fifo_size * HZ * 30 / 269) + 2;
- /* get it right for 134.5 baud */
- } else if (baud_table[i]) {
- info->timeout =
- (info->xmit_fifo_size * HZ * 15 / baud_table[i]) +
- 2;
- /* this needs to be propagated into the card info */
- } else {
- info->timeout = 0;
- }
- }
- /* By tradition (is it a standard?) a baud rate of zero
- implies the line should be/has been closed. A bit
- later in this routine such a test is performed. */
-
- /* byte size and parity */
- info->cor7 = 0;
- info->cor6 = 0;
- info->cor5 = 0;
- info->cor4 = (info->default_threshold ? info->default_threshold : baud_cor4[i]); /* receive threshold */
- /* Following two lines added 101295, RGH. */
- /* It is obviously wrong to access CyCORx, and not info->corx here,
- * try and remember to fix it later! */
- channel = info->line;
- base_addr[CyCAR] = (u_char) channel;
- if (C_CLOCAL(info->tty)) {
- if (base_addr[CyIER] & CyMdmCh)
- base_addr[CyIER] &= ~CyMdmCh; /* without modem intr */
- /* ignore 1->0 modem transitions */
- if (base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD))
- base_addr[CyCOR4] &= ~(CyDSR | CyCTS | CyDCD);
- /* ignore 0->1 modem transitions */
- if (base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD))
- base_addr[CyCOR5] &= ~(CyDSR | CyCTS | CyDCD);
- } else {
- if ((base_addr[CyIER] & CyMdmCh) != CyMdmCh)
- base_addr[CyIER] |= CyMdmCh; /* with modem intr */
- /* act on 1->0 modem transitions */
- if ((base_addr[CyCOR4] & (CyDSR | CyCTS | CyDCD)) !=
- (CyDSR | CyCTS | CyDCD))
- base_addr[CyCOR4] |= CyDSR | CyCTS | CyDCD;
- /* act on 0->1 modem transitions */
- if ((base_addr[CyCOR5] & (CyDSR | CyCTS | CyDCD)) !=
- (CyDSR | CyCTS | CyDCD))
- base_addr[CyCOR5] |= CyDSR | CyCTS | CyDCD;
- }
- info->cor3 = (cflag & CSTOPB) ? Cy_2_STOP : Cy_1_STOP;
- info->cor2 = CyETC;
- switch (cflag & CSIZE) {
- case CS5:
- info->cor1 = Cy_5_BITS;
- break;
- case CS6:
- info->cor1 = Cy_6_BITS;
- break;
- case CS7:
- info->cor1 = Cy_7_BITS;
- break;
- case CS8:
- info->cor1 = Cy_8_BITS;
- break;
- }
- if (cflag & PARENB) {
- if (cflag & PARODD) {
- info->cor1 |= CyPARITY_O;
- } else {
- info->cor1 |= CyPARITY_E;
- }
- } else {
- info->cor1 |= CyPARITY_NONE;
- }
-
- /* CTS flow control flag */
-#if 0
- /* Don't complcate matters for now! RGH 141095 */
- if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
- info->cor2 |= CyCtsAE;
- } else {
- info->flags &= ~ASYNC_CTS_FLOW;
- info->cor2 &= ~CyCtsAE;
- }
-#endif
- if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
- else
- info->flags |= ASYNC_CHECK_CD;
-
- /***********************************************
- The hardware option, CyRtsAO, presents RTS when
- the chip has characters to send. Since most modems
- use RTS as reverse (inbound) flow control, this
- option is not used. If inbound flow control is
- necessary, DTR can be programmed to provide the
- appropriate signals for use with a non-standard
- cable. Contact Marcio Saito for details.
- ***********************************************/
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
-
- /* CyCMR set once only in mvme167_init_serial() */
- if (base_addr[CyLICR] != channel << 2)
- base_addr[CyLICR] = channel << 2;
- if (base_addr[CyLIVR] != 0x5c)
- base_addr[CyLIVR] = 0x5c;
-
- /* tx and rx baud rate */
-
- if (base_addr[CyCOR1] != info->cor1)
- need_init_chan = 1;
- if (base_addr[CyTCOR] != info->tco)
- base_addr[CyTCOR] = info->tco;
- if (base_addr[CyTBPR] != info->tbpr)
- base_addr[CyTBPR] = info->tbpr;
- if (base_addr[CyRCOR] != info->rco)
- base_addr[CyRCOR] = info->rco;
- if (base_addr[CyRBPR] != info->rbpr)
- base_addr[CyRBPR] = info->rbpr;
-
- /* set line characteristics according configuration */
-
- if (base_addr[CySCHR1] != START_CHAR(info->tty))
- base_addr[CySCHR1] = START_CHAR(info->tty);
- if (base_addr[CySCHR2] != STOP_CHAR(info->tty))
- base_addr[CySCHR2] = STOP_CHAR(info->tty);
- if (base_addr[CySCRL] != START_CHAR(info->tty))
- base_addr[CySCRL] = START_CHAR(info->tty);
- if (base_addr[CySCRH] != START_CHAR(info->tty))
- base_addr[CySCRH] = START_CHAR(info->tty);
- if (base_addr[CyCOR1] != info->cor1)
- base_addr[CyCOR1] = info->cor1;
- if (base_addr[CyCOR2] != info->cor2)
- base_addr[CyCOR2] = info->cor2;
- if (base_addr[CyCOR3] != info->cor3)
- base_addr[CyCOR3] = info->cor3;
- if (base_addr[CyCOR4] != info->cor4)
- base_addr[CyCOR4] = info->cor4;
- if (base_addr[CyCOR5] != info->cor5)
- base_addr[CyCOR5] = info->cor5;
- if (base_addr[CyCOR6] != info->cor6)
- base_addr[CyCOR6] = info->cor6;
- if (base_addr[CyCOR7] != info->cor7)
- base_addr[CyCOR7] = info->cor7;
-
- if (need_init_chan)
- write_cy_cmd(base_addr, CyINIT_CHAN);
-
- base_addr[CyCAR] = (u_char) channel; /* !!! Is this needed? */
-
- /* 2ms default rx timeout */
- ti = info->default_timeout ? info->default_timeout : 0x02;
- if (base_addr[CyRTPRL] != ti)
- base_addr[CyRTPRL] = ti;
- if (base_addr[CyRTPRH] != 0)
- base_addr[CyRTPRH] = 0;
-
- /* Set up RTS here also ????? RGH 141095 */
- if (i == 0) { /* baud rate is zero, turn off line */
- if ((base_addr[CyMSVR2] & CyDTR) == CyDTR)
- base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- } else {
- if ((base_addr[CyMSVR2] & CyDTR) != CyDTR)
- base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- }
-
- if (info->tty) {
- clear_bit(TTY_IO_ERROR, &info->tty->flags);
- }
-
- local_irq_restore(flags);
-
-} /* config_setup */
-
-static int cy_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_put_char %s(0x%02x)\n", tty->name, ch);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_put_char"))
- return 0;
-
- if (!info->xmit_buf)
- return 0;
-
- local_irq_save(flags);
- if (info->xmit_cnt >= PAGE_SIZE - 1) {
- local_irq_restore(flags);
- return 0;
- }
-
- info->xmit_buf[info->xmit_head++] = ch;
- info->xmit_head &= PAGE_SIZE - 1;
- info->xmit_cnt++;
- local_irq_restore(flags);
- return 1;
-} /* cy_put_char */
-
-static void cy_flush_chars(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_flush_chars %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
- return;
-
- if (info->xmit_cnt <= 0 || tty->stopped
- || tty->hw_stopped || !info->xmit_buf)
- return;
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = channel;
- base_addr[CyIER] |= CyTxMpty;
- local_irq_restore(flags);
-} /* cy_flush_chars */
-
-/* This routine gets called when tty_write has put something into
- the write_queue. If the port is not already transmitting stuff,
- start it off by enabling interrupts. The interrupt service
- routine will then ensure that the characters are sent. If the
- port is already active, there is no need to kick it.
- */
-static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
- int c, total = 0;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_write %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_write")) {
- return 0;
- }
-
- if (!info->xmit_buf) {
- return 0;
- }
-
- while (1) {
- local_irq_save(flags);
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0) {
- local_irq_restore(flags);
- break;
- }
-
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
- info->xmit_head =
- (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
- info->xmit_cnt += c;
- local_irq_restore(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
- start_xmit(info);
- }
- return total;
-} /* cy_write */
-
-static int cy_write_room(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- int ret;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_write_room %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_write_room"))
- return 0;
- ret = PAGE_SIZE - info->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- return ret;
-} /* cy_write_room */
-
-static int cy_chars_in_buffer(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_chars_in_buffer %s %d\n", tty->name, info->xmit_cnt); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_chars_in_buffer"))
- return 0;
-
- return info->xmit_cnt;
-} /* cy_chars_in_buffer */
-
-static void cy_flush_buffer(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
-
-#ifdef SERIAL_DEBUG_IO
- printk("cy_flush_buffer %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
- return;
- local_irq_save(flags);
- info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- local_irq_restore(flags);
- tty_wakeup(tty);
-} /* cy_flush_buffer */
-
-/* This routine is called by the upper-layer tty layer to signal
- that incoming characters should be throttled or that the
- throttle should be released.
- */
-static void cy_throttle(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
-
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
- printk("cy_throttle %s\n", tty->name);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
- return;
- }
-
- if (I_IXOFF(tty)) {
- info->x_char = STOP_CHAR(tty);
- /* Should use the "Send Special Character" feature!!! */
- }
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- base_addr[CyMSVR1] = 0;
- local_irq_restore(flags);
-} /* cy_throttle */
-
-static void cy_unthrottle(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- unsigned long flags;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
-
-#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %d....\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty));
- printk("cy_unthrottle %s\n", tty->name);
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_nthrottle")) {
- return;
- }
-
- if (I_IXOFF(tty)) {
- info->x_char = START_CHAR(tty);
- /* Should use the "Send Special Character" feature!!! */
- }
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- base_addr[CyMSVR1] = CyRTS;
- local_irq_restore(flags);
-} /* cy_unthrottle */
-
-static int
-get_serial_info(struct cyclades_port *info,
- struct serial_struct __user * retinfo)
-{
- struct serial_struct tmp;
-
-/* CP('g'); */
- if (!retinfo)
- return -EFAULT;
- memset(&tmp, 0, sizeof(tmp));
- tmp.type = info->type;
- tmp.line = info->line;
- tmp.port = info->line;
- tmp.irq = 0;
- tmp.flags = info->flags;
- tmp.baud_base = 0; /*!!! */
- tmp.close_delay = info->close_delay;
- tmp.custom_divisor = 0; /*!!! */
- tmp.hub6 = 0; /*!!! */
- return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
-} /* get_serial_info */
-
-static int
-set_serial_info(struct cyclades_port *info,
- struct serial_struct __user * new_info)
-{
- struct serial_struct new_serial;
- struct cyclades_port old_info;
-
-/* CP('s'); */
- if (!new_info)
- return -EFAULT;
- if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
- return -EFAULT;
- old_info = *info;
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ASYNC_FLAGS & ~ASYNC_USR_MASK) !=
- (info->flags & ASYNC_FLAGS & ~ASYNC_USR_MASK)))
- return -EPERM;
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
- goto check_and_exit;
- }
-
- /*
- * OK, past this point, all the error checking has been done.
- * At this point, we start making changes.....
- */
-
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
- info->close_delay = new_serial.close_delay;
-
-check_and_exit:
- if (info->flags & ASYNC_INITIALIZED) {
- config_setup(info);
- return 0;
- }
- return startup(info);
-} /* set_serial_info */
-
-static int cy_tiocmget(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
- int channel;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long flags;
- unsigned char status;
-
- channel = info->line;
-
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- status = base_addr[CyMSVR1] | base_addr[CyMSVR2];
- local_irq_restore(flags);
-
- return ((status & CyRTS) ? TIOCM_RTS : 0)
- | ((status & CyDTR) ? TIOCM_DTR : 0)
- | ((status & CyDCD) ? TIOCM_CAR : 0)
- | ((status & CyDSR) ? TIOCM_DSR : 0)
- | ((status & CyCTS) ? TIOCM_CTS : 0);
-} /* cy_tiocmget */
-
-static int
-cy_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
-{
- struct cyclades_port *info = tty->driver_data;
- int channel;
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long flags;
-
- channel = info->line;
-
- if (set & TIOCM_RTS) {
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- base_addr[CyMSVR1] = CyRTS;
- local_irq_restore(flags);
- }
- if (set & TIOCM_DTR) {
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
-/* CP('S');CP('2'); */
- base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- local_irq_restore(flags);
- }
-
- if (clear & TIOCM_RTS) {
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- base_addr[CyMSVR1] = 0;
- local_irq_restore(flags);
- }
- if (clear & TIOCM_DTR) {
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
-/* CP('C');CP('2'); */
- base_addr[CyMSVR2] = 0;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: dropping DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- local_irq_restore(flags);
- }
-
- return 0;
-} /* set_modem_info */
-
-static void send_break(struct cyclades_port *info, int duration)
-{ /* Let the transmit ISR take care of this (since it
- requires stuffing characters into the output stream).
- */
- info->x_break = duration;
- if (!info->xmit_cnt) {
- start_xmit(info);
- }
-} /* send_break */
-
-static int
-get_mon_info(struct cyclades_port *info, struct cyclades_monitor __user * mon)
-{
-
- if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
- return -EFAULT;
- info->mon.int_count = 0;
- info->mon.char_count = 0;
- info->mon.char_max = 0;
- info->mon.char_last = 0;
- return 0;
-}
-
-static int set_threshold(struct cyclades_port *info, unsigned long __user * arg)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long value;
- int channel;
-
- if (get_user(value, arg))
- return -EFAULT;
-
- channel = info->line;
- info->cor4 &= ~CyREC_FIFO;
- info->cor4 |= value & CyREC_FIFO;
- base_addr[CyCOR4] = info->cor4;
- return 0;
-}
-
-static int
-get_threshold(struct cyclades_port *info, unsigned long __user * value)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
- unsigned long tmp;
-
- channel = info->line;
-
- tmp = base_addr[CyCOR4] & CyREC_FIFO;
- return put_user(tmp, value);
-}
-
-static int
-set_default_threshold(struct cyclades_port *info, unsigned long __user * arg)
-{
- unsigned long value;
-
- if (get_user(value, arg))
- return -EFAULT;
-
- info->default_threshold = value & 0x0f;
- return 0;
-}
-
-static int
-get_default_threshold(struct cyclades_port *info, unsigned long __user * value)
-{
- return put_user(info->default_threshold, value);
-}
-
-static int set_timeout(struct cyclades_port *info, unsigned long __user * arg)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
- unsigned long value;
-
- if (get_user(value, arg))
- return -EFAULT;
-
- channel = info->line;
-
- base_addr[CyRTPRL] = value & 0xff;
- base_addr[CyRTPRH] = (value >> 8) & 0xff;
- return 0;
-}
-
-static int get_timeout(struct cyclades_port *info, unsigned long __user * value)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
- unsigned long tmp;
-
- channel = info->line;
-
- tmp = base_addr[CyRTPRL];
- return put_user(tmp, value);
-}
-
-static int set_default_timeout(struct cyclades_port *info, unsigned long value)
-{
- info->default_timeout = value & 0xff;
- return 0;
-}
-
-static int
-get_default_timeout(struct cyclades_port *info, unsigned long __user * value)
-{
- return put_user(info->default_timeout, value);
-}
-
-static int
-cy_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct cyclades_port *info = tty->driver_data;
- int ret_val = 0;
- void __user *argp = (void __user *)arg;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
-#endif
-
- tty_lock();
-
- switch (cmd) {
- case CYGETMON:
- ret_val = get_mon_info(info, argp);
- break;
- case CYGETTHRESH:
- ret_val = get_threshold(info, argp);
- break;
- case CYSETTHRESH:
- ret_val = set_threshold(info, argp);
- break;
- case CYGETDEFTHRESH:
- ret_val = get_default_threshold(info, argp);
- break;
- case CYSETDEFTHRESH:
- ret_val = set_default_threshold(info, argp);
- break;
- case CYGETTIMEOUT:
- ret_val = get_timeout(info, argp);
- break;
- case CYSETTIMEOUT:
- ret_val = set_timeout(info, argp);
- break;
- case CYGETDEFTIMEOUT:
- ret_val = get_default_timeout(info, argp);
- break;
- case CYSETDEFTIMEOUT:
- ret_val = set_default_timeout(info, (unsigned long)arg);
- break;
- case TCSBRK: /* SVID version: non-zero arg --> no break */
- ret_val = tty_check_change(tty);
- if (ret_val)
- break;
- tty_wait_until_sent(tty, 0);
- if (!arg)
- send_break(info, HZ / 4); /* 1/4 second */
- break;
- case TCSBRKP: /* support for POSIX tcsendbreak() */
- ret_val = tty_check_change(tty);
- if (ret_val)
- break;
- tty_wait_until_sent(tty, 0);
- send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
- break;
-
-/* The following commands are incompletely implemented!!! */
- case TIOCGSERIAL:
- ret_val = get_serial_info(info, argp);
- break;
- case TIOCSSERIAL:
- ret_val = set_serial_info(info, argp);
- break;
- default:
- ret_val = -ENOIOCTLCMD;
- }
- tty_unlock();
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_ioctl done\n");
-#endif
-
- return ret_val;
-} /* cy_ioctl */
-
-static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
- struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_set_termios %s\n", tty->name);
-#endif
-
- if (tty->termios->c_cflag == old_termios->c_cflag)
- return;
- config_setup(info);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->stopped = 0;
- cy_start(tty);
- }
-#ifdef tytso_patch_94Nov25_1726
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&info->open_wait);
-#endif
-} /* cy_set_termios */
-
-static void cy_close(struct tty_struct *tty, struct file *filp)
-{
- struct cyclades_port *info = tty->driver_data;
-
-/* CP('C'); */
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_close %s\n", tty->name);
-#endif
-
- if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
- return;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_close %s, count = %d\n", tty->name, info->count);
-#endif
-
- if ((tty->count == 1) && (info->count != 1)) {
- /*
- * Uh, oh. tty->count is 1, which means that the tty
- * structure will be freed. Info->count should always
- * be one in these conditions. If it's greater than
- * one, we've got real problems, since it means the
- * serial port won't be shutdown.
- */
- printk("cy_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
- info->count = 1;
- }
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: decrementing count to %d\n", __LINE__,
- info->count - 1);
-#endif
- if (--info->count < 0) {
- printk("cy_close: bad serial port count for ttys%d: %d\n",
- info->line, info->count);
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
- info->count = 0;
- }
- if (info->count)
- return;
- info->flags |= ASYNC_CLOSING;
- if (info->flags & ASYNC_INITIALIZED)
- tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
- shutdown(info);
- cy_flush_buffer(tty);
- tty_ldisc_flush(tty);
- info->tty = NULL;
- if (info->blocked_open) {
- if (info->close_delay) {
- msleep_interruptible(jiffies_to_msecs
- (info->close_delay));
- }
- wake_up_interruptible(&info->open_wait);
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_close done\n");
-#endif
-} /* cy_close */
-
-/*
- * cy_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void cy_hangup(struct tty_struct *tty)
-{
- struct cyclades_port *info = tty->driver_data;
-
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_hangup %s\n", tty->name); /* */
-#endif
-
- if (serial_paranoia_check(info, tty->name, "cy_hangup"))
- return;
-
- shutdown(info);
-#if 0
- info->event = 0;
- info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: setting count to 0\n", __LINE__);
-#endif
- info->tty = 0;
-#endif
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
- wake_up_interruptible(&info->open_wait);
-} /* cy_hangup */
-
-/*
- * ------------------------------------------------------------
- * cy_open() and friends
- * ------------------------------------------------------------
- */
-
-static int
-block_til_ready(struct tty_struct *tty, struct file *filp,
- struct cyclades_port *info)
-{
- DECLARE_WAITQUEUE(wait, current);
- unsigned long flags;
- int channel;
- int retval;
- volatile u_char *base_addr = (u_char *) BASE_ADDR;
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&info->close_wait);
- if (info->flags & ASYNC_HUP_NOTIFY) {
- return -EAGAIN;
- } else {
- return -ERESTARTSYS;
- }
- }
-
- /*
- * If non-blocking mode is set, then make the check up front
- * and then exit.
- */
- if (filp->f_flags & O_NONBLOCK) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * cy_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&info->open_wait, &wait);
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready before block: %s, count = %d\n",
- tty->name, info->count);
- /**/
-#endif
- info->count--;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: decrementing count to %d\n", __LINE__, info->count);
-#endif
- info->blocked_open++;
-
- channel = info->line;
-
- while (1) {
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
- base_addr[CyMSVR1] = CyRTS;
-/* CP('S');CP('4'); */
- base_addr[CyMSVR2] = CyDTR;
-#ifdef SERIAL_DEBUG_DTR
- printk("cyc: %d: raising DTR\n", __LINE__);
- printk(" status: 0x%x, 0x%x\n", base_addr[CyMSVR1],
- base_addr[CyMSVR2]);
-#endif
- local_irq_restore(flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp)
- || !(info->flags & ASYNC_INITIALIZED)) {
- if (info->flags & ASYNC_HUP_NOTIFY) {
- retval = -EAGAIN;
- } else {
- retval = -ERESTARTSYS;
- }
- break;
- }
- local_irq_save(flags);
- base_addr[CyCAR] = (u_char) channel;
-/* CP('L');CP1(1 && C_CLOCAL(tty)); CP1(1 && (base_addr[CyMSVR1] & CyDCD) ); */
- if (!(info->flags & ASYNC_CLOSING)
- && (C_CLOCAL(tty)
- || (base_addr[CyMSVR1] & CyDCD))) {
- local_irq_restore(flags);
- break;
- }
- local_irq_restore(flags);
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready blocking: %s, count = %d\n",
- tty->name, info->count);
- /**/
-#endif
- tty_unlock();
- schedule();
- tty_lock();
- }
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->open_wait, &wait);
- if (!tty_hung_up_p(filp)) {
- info->count++;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: incrementing count to %d\n", __LINE__,
- info->count);
-#endif
- }
- info->blocked_open--;
-#ifdef SERIAL_DEBUG_OPEN
- printk("block_til_ready after blocking: %s, count = %d\n",
- tty->name, info->count);
- /**/
-#endif
- if (retval)
- return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
-} /* block_til_ready */
-
-/*
- * This routine is called whenever a serial port is opened. It
- * performs the serial-specific initialization for the tty structure.
- */
-int cy_open(struct tty_struct *tty, struct file *filp)
-{
- struct cyclades_port *info;
- int retval, line;
-
-/* CP('O'); */
- line = tty->index;
- if ((line < 0) || (NR_PORTS <= line)) {
- return -ENODEV;
- }
- info = &cy_port[line];
- if (info->line < 0) {
- return -ENODEV;
- }
-#ifdef SERIAL_DEBUG_OTHER
- printk("cy_open %s\n", tty->name); /* */
-#endif
- if (serial_paranoia_check(info, tty->name, "cy_open")) {
- return -ENODEV;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open %s, count = %d\n", tty->name, info->count);
- /**/
-#endif
- info->count++;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: incrementing count to %d\n", __LINE__, info->count);
-#endif
- tty->driver_data = info;
- info->tty = tty;
-
- /*
- * Start up serial port
- */
- retval = startup(info);
- if (retval) {
- return retval;
- }
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open returning after block_til_ready with %d\n",
- retval);
-#endif
- return retval;
- }
-#ifdef SERIAL_DEBUG_OPEN
- printk("cy_open done\n");
- /**/
-#endif
- return 0;
-} /* cy_open */
-
-/*
- * ---------------------------------------------------------------------
- * serial167_init() and friends
- *
- * serial167_init() is called at boot-time to initialize the serial driver.
- * ---------------------------------------------------------------------
- */
-
-/*
- * This routine prints out the appropriate serial driver version
- * number, and identifies which options were configured into this
- * driver.
- */
-static void show_version(void)
-{
- printk("MVME166/167 cd2401 driver\n");
-} /* show_version */
-
-/* initialize chips on card -- return number of valid
- chips (which is number of ports/4) */
-
-/*
- * This initialises the hardware to a reasonable state. It should
- * probe the chip first so as to copy 166-Bug setup as a default for
- * port 0. It initialises CMR to CyASYNC; that is never done again, so
- * as to limit the number of CyINIT_CHAN commands in normal running.
- *
- * ... I wonder what I should do if this fails ...
- */
-
-void mvme167_serial_console_setup(int cflag)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int ch;
- u_char spd;
- u_char rcor, rbpr, badspeed = 0;
- unsigned long flags;
-
- local_irq_save(flags);
-
- /*
- * First probe channel zero of the chip, to see what speed has
- * been selected.
- */
-
- base_addr[CyCAR] = 0;
-
- rcor = base_addr[CyRCOR] << 5;
- rbpr = base_addr[CyRBPR];
-
- for (spd = 0; spd < sizeof(baud_bpr); spd++)
- if (rbpr == baud_bpr[spd] && rcor == baud_co[spd])
- break;
- if (spd >= sizeof(baud_bpr)) {
- spd = 14; /* 19200 */
- badspeed = 1; /* Failed to identify speed */
- }
- initial_console_speed = spd;
-
- /* OK, we have chosen a speed, now reset and reinitialise */
-
- my_udelay(20000L); /* Allow time for any active o/p to complete */
- if (base_addr[CyCCR] != 0x00) {
- local_irq_restore(flags);
- /* printk(" chip is never idle (CCR != 0)\n"); */
- return;
- }
-
- base_addr[CyCCR] = CyCHIP_RESET; /* Reset the chip */
- my_udelay(1000L);
-
- if (base_addr[CyGFRCR] == 0x00) {
- local_irq_restore(flags);
- /* printk(" chip is not responding (GFRCR stayed 0)\n"); */
- return;
- }
-
- /*
- * System clock is 20Mhz, divided by 2048, so divide by 10 for a 1.0ms
- * tick
- */
-
- base_addr[CyTPR] = 10;
-
- base_addr[CyPILR1] = 0x01; /* Interrupt level for modem change */
- base_addr[CyPILR2] = 0x02; /* Interrupt level for tx ints */
- base_addr[CyPILR3] = 0x03; /* Interrupt level for rx ints */
-
- /*
- * Attempt to set up all channels to something reasonable, and
- * bang out a INIT_CHAN command. We should then be able to limit
- * the amount of fiddling we have to do in normal running.
- */
-
- for (ch = 3; ch >= 0; ch--) {
- base_addr[CyCAR] = (u_char) ch;
- base_addr[CyIER] = 0;
- base_addr[CyCMR] = CyASYNC;
- base_addr[CyLICR] = (u_char) ch << 2;
- base_addr[CyLIVR] = 0x5c;
- base_addr[CyTCOR] = baud_co[spd];
- base_addr[CyTBPR] = baud_bpr[spd];
- base_addr[CyRCOR] = baud_co[spd] >> 5;
- base_addr[CyRBPR] = baud_bpr[spd];
- base_addr[CySCHR1] = 'Q' & 0x1f;
- base_addr[CySCHR2] = 'X' & 0x1f;
- base_addr[CySCRL] = 0;
- base_addr[CySCRH] = 0;
- base_addr[CyCOR1] = Cy_8_BITS | CyPARITY_NONE;
- base_addr[CyCOR2] = 0;
- base_addr[CyCOR3] = Cy_1_STOP;
- base_addr[CyCOR4] = baud_cor4[spd];
- base_addr[CyCOR5] = 0;
- base_addr[CyCOR6] = 0;
- base_addr[CyCOR7] = 0;
- base_addr[CyRTPRL] = 2;
- base_addr[CyRTPRH] = 0;
- base_addr[CyMSVR1] = 0;
- base_addr[CyMSVR2] = 0;
- write_cy_cmd(base_addr, CyINIT_CHAN | CyDIS_RCVR | CyDIS_XMTR);
- }
-
- /*
- * Now do specials for channel zero....
- */
-
- base_addr[CyMSVR1] = CyRTS;
- base_addr[CyMSVR2] = CyDTR;
- base_addr[CyIER] = CyRxData;
- write_cy_cmd(base_addr, CyENB_RCVR | CyENB_XMTR);
-
- local_irq_restore(flags);
-
- my_udelay(20000L); /* Let it all settle down */
-
- printk("CD2401 initialised, chip is rev 0x%02x\n", base_addr[CyGFRCR]);
- if (badspeed)
- printk
- (" WARNING: Failed to identify line speed, rcor=%02x,rbpr=%02x\n",
- rcor >> 5, rbpr);
-} /* serial_console_init */
-
-static const struct tty_operations cy_ops = {
- .open = cy_open,
- .close = cy_close,
- .write = cy_write,
- .put_char = cy_put_char,
- .flush_chars = cy_flush_chars,
- .write_room = cy_write_room,
- .chars_in_buffer = cy_chars_in_buffer,
- .flush_buffer = cy_flush_buffer,
- .ioctl = cy_ioctl,
- .throttle = cy_throttle,
- .unthrottle = cy_unthrottle,
- .set_termios = cy_set_termios,
- .stop = cy_stop,
- .start = cy_start,
- .hangup = cy_hangup,
- .tiocmget = cy_tiocmget,
- .tiocmset = cy_tiocmset,
-};
-
-/* The serial driver boot-time initialization code!
- Hardware I/O ports are mapped to character special devices on a
- first found, first allocated manner. That is, this code searches
- for Cyclom cards in the system. As each is found, it is probed
- to discover how many chips (and thus how many ports) are present.
- These ports are mapped to the tty ports 64 and upward in monotonic
- fashion. If an 8-port card is replaced with a 16-port card, the
- port mapping on a following card will shift.
-
- This approach is different from what is used in the other serial
- device driver because the Cyclom is more properly a multiplexer,
- not just an aggregation of serial ports on one card.
-
- If there are more cards with more ports than have been statically
- allocated above, a warning is printed and the extra ports are ignored.
- */
-static int __init serial167_init(void)
-{
- struct cyclades_port *info;
- int ret = 0;
- int good_ports = 0;
- int port_num = 0;
- int index;
- int DefSpeed;
-#ifdef notyet
- struct sigaction sa;
-#endif
-
- if (!(mvme16x_config & MVME16x_CONFIG_GOT_CD2401))
- return 0;
-
- cy_serial_driver = alloc_tty_driver(NR_PORTS);
- if (!cy_serial_driver)
- return -ENOMEM;
-
-#if 0
- scrn[1] = '\0';
-#endif
-
- show_version();
-
- /* Has "console=0,9600n8" been used in bootinfo to change speed? */
- if (serial_console_cflag)
- DefSpeed = serial_console_cflag & 0017;
- else {
- DefSpeed = initial_console_speed;
- serial_console_info = &cy_port[0];
- serial_console_cflag = DefSpeed | CS8;
-#if 0
- serial_console = 64; /*callout_driver.minor_start */
-#endif
- }
-
- /* Initialize the tty_driver structure */
-
- cy_serial_driver->owner = THIS_MODULE;
- cy_serial_driver->name = "ttyS";
- cy_serial_driver->major = TTY_MAJOR;
- cy_serial_driver->minor_start = 64;
- cy_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- cy_serial_driver->subtype = SERIAL_TYPE_NORMAL;
- cy_serial_driver->init_termios = tty_std_termios;
- cy_serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- cy_serial_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(cy_serial_driver, &cy_ops);
-
- ret = tty_register_driver(cy_serial_driver);
- if (ret) {
- printk(KERN_ERR "Couldn't register MVME166/7 serial driver\n");
- put_tty_driver(cy_serial_driver);
- return ret;
- }
-
- port_num = 0;
- info = cy_port;
- for (index = 0; index < 1; index++) {
-
- good_ports = 4;
-
- if (port_num < NR_PORTS) {
- while (good_ports-- && port_num < NR_PORTS) {
- /*** initialize port ***/
- info->magic = CYCLADES_MAGIC;
- info->type = PORT_CIRRUS;
- info->card = index;
- info->line = port_num;
- info->flags = STD_COM_FLAGS;
- info->tty = NULL;
- info->xmit_fifo_size = 12;
- info->cor1 = CyPARITY_NONE | Cy_8_BITS;
- info->cor2 = CyETC;
- info->cor3 = Cy_1_STOP;
- info->cor4 = 0x08; /* _very_ small receive threshold */
- info->cor5 = 0;
- info->cor6 = 0;
- info->cor7 = 0;
- info->tbpr = baud_bpr[DefSpeed]; /* Tx BPR */
- info->tco = baud_co[DefSpeed]; /* Tx CO */
- info->rbpr = baud_bpr[DefSpeed]; /* Rx BPR */
- info->rco = baud_co[DefSpeed] >> 5; /* Rx CO */
- info->close_delay = 0;
- info->x_char = 0;
- info->count = 0;
-#ifdef SERIAL_DEBUG_COUNT
- printk("cyc: %d: setting count to 0\n",
- __LINE__);
-#endif
- info->blocked_open = 0;
- info->default_threshold = 0;
- info->default_timeout = 0;
- init_waitqueue_head(&info->open_wait);
- init_waitqueue_head(&info->close_wait);
- /* info->session */
- /* info->pgrp */
-/*** !!!!!!!! this may expose new bugs !!!!!!!!! *********/
- info->read_status_mask =
- CyTIMEOUT | CySPECHAR | CyBREAK | CyPARITY |
- CyFRAME | CyOVERRUN;
- /* info->timeout */
-
- printk("ttyS%d ", info->line);
- port_num++;
- info++;
- if (!(port_num & 7)) {
- printk("\n ");
- }
- }
- }
- printk("\n");
- }
- while (port_num < NR_PORTS) {
- info->line = -1;
- port_num++;
- info++;
- }
-
- ret = request_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt, 0,
- "cd2401_errors", cd2401_rxerr_interrupt);
- if (ret) {
- printk(KERN_ERR "Could't get cd2401_errors IRQ");
- goto cleanup_serial_driver;
- }
-
- ret = request_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt, 0,
- "cd2401_modem", cd2401_modem_interrupt);
- if (ret) {
- printk(KERN_ERR "Could't get cd2401_modem IRQ");
- goto cleanup_irq_cd2401_errors;
- }
-
- ret = request_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt, 0,
- "cd2401_txints", cd2401_tx_interrupt);
- if (ret) {
- printk(KERN_ERR "Could't get cd2401_txints IRQ");
- goto cleanup_irq_cd2401_modem;
- }
-
- ret = request_irq(MVME167_IRQ_SER_RX, cd2401_rx_interrupt, 0,
- "cd2401_rxints", cd2401_rx_interrupt);
- if (ret) {
- printk(KERN_ERR "Could't get cd2401_rxints IRQ");
- goto cleanup_irq_cd2401_txints;
- }
-
- /* Now we have registered the interrupt handlers, allow the interrupts */
-
- pcc2chip[PccSCCMICR] = 0x15; /* Serial ints are level 5 */
- pcc2chip[PccSCCTICR] = 0x15;
- pcc2chip[PccSCCRICR] = 0x15;
-
- pcc2chip[PccIMLR] = 3; /* Allow PCC2 ints above 3!? */
-
- return 0;
-cleanup_irq_cd2401_txints:
- free_irq(MVME167_IRQ_SER_TX, cd2401_tx_interrupt);
-cleanup_irq_cd2401_modem:
- free_irq(MVME167_IRQ_SER_MODEM, cd2401_modem_interrupt);
-cleanup_irq_cd2401_errors:
- free_irq(MVME167_IRQ_SER_ERR, cd2401_rxerr_interrupt);
-cleanup_serial_driver:
- if (tty_unregister_driver(cy_serial_driver))
- printk(KERN_ERR
- "Couldn't unregister MVME166/7 serial driver\n");
- put_tty_driver(cy_serial_driver);
- return ret;
-} /* serial167_init */
-
-module_init(serial167_init);
-
-#ifdef CYCLOM_SHOW_STATUS
-static void show_status(int line_num)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- int channel;
- struct cyclades_port *info;
- unsigned long flags;
-
- info = &cy_port[line_num];
- channel = info->line;
- printk(" channel %d\n", channel);
- /**/ printk(" cy_port\n");
- printk(" card line flags = %d %d %x\n",
- info->card, info->line, info->flags);
- printk
- (" *tty read_status_mask timeout xmit_fifo_size = %lx %x %x %x\n",
- (long)info->tty, info->read_status_mask, info->timeout,
- info->xmit_fifo_size);
- printk(" cor1,cor2,cor3,cor4,cor5,cor6,cor7 = %x %x %x %x %x %x %x\n",
- info->cor1, info->cor2, info->cor3, info->cor4, info->cor5,
- info->cor6, info->cor7);
- printk(" tbpr,tco,rbpr,rco = %d %d %d %d\n", info->tbpr, info->tco,
- info->rbpr, info->rco);
- printk(" close_delay event count = %d %d %d\n", info->close_delay,
- info->event, info->count);
- printk(" x_char blocked_open = %x %x\n", info->x_char,
- info->blocked_open);
- printk(" open_wait = %lx %lx %lx\n", (long)info->open_wait);
-
- local_irq_save(flags);
-
-/* Global Registers */
-
- printk(" CyGFRCR %x\n", base_addr[CyGFRCR]);
- printk(" CyCAR %x\n", base_addr[CyCAR]);
- printk(" CyRISR %x\n", base_addr[CyRISR]);
- printk(" CyTISR %x\n", base_addr[CyTISR]);
- printk(" CyMISR %x\n", base_addr[CyMISR]);
- printk(" CyRIR %x\n", base_addr[CyRIR]);
- printk(" CyTIR %x\n", base_addr[CyTIR]);
- printk(" CyMIR %x\n", base_addr[CyMIR]);
- printk(" CyTPR %x\n", base_addr[CyTPR]);
-
- base_addr[CyCAR] = (u_char) channel;
-
-/* Virtual Registers */
-
-#if 0
- printk(" CyRIVR %x\n", base_addr[CyRIVR]);
- printk(" CyTIVR %x\n", base_addr[CyTIVR]);
- printk(" CyMIVR %x\n", base_addr[CyMIVR]);
- printk(" CyMISR %x\n", base_addr[CyMISR]);
-#endif
-
-/* Channel Registers */
-
- printk(" CyCCR %x\n", base_addr[CyCCR]);
- printk(" CyIER %x\n", base_addr[CyIER]);
- printk(" CyCOR1 %x\n", base_addr[CyCOR1]);
- printk(" CyCOR2 %x\n", base_addr[CyCOR2]);
- printk(" CyCOR3 %x\n", base_addr[CyCOR3]);
- printk(" CyCOR4 %x\n", base_addr[CyCOR4]);
- printk(" CyCOR5 %x\n", base_addr[CyCOR5]);
-#if 0
- printk(" CyCCSR %x\n", base_addr[CyCCSR]);
- printk(" CyRDCR %x\n", base_addr[CyRDCR]);
-#endif
- printk(" CySCHR1 %x\n", base_addr[CySCHR1]);
- printk(" CySCHR2 %x\n", base_addr[CySCHR2]);
-#if 0
- printk(" CySCHR3 %x\n", base_addr[CySCHR3]);
- printk(" CySCHR4 %x\n", base_addr[CySCHR4]);
- printk(" CySCRL %x\n", base_addr[CySCRL]);
- printk(" CySCRH %x\n", base_addr[CySCRH]);
- printk(" CyLNC %x\n", base_addr[CyLNC]);
- printk(" CyMCOR1 %x\n", base_addr[CyMCOR1]);
- printk(" CyMCOR2 %x\n", base_addr[CyMCOR2]);
-#endif
- printk(" CyRTPRL %x\n", base_addr[CyRTPRL]);
- printk(" CyRTPRH %x\n", base_addr[CyRTPRH]);
- printk(" CyMSVR1 %x\n", base_addr[CyMSVR1]);
- printk(" CyMSVR2 %x\n", base_addr[CyMSVR2]);
- printk(" CyRBPR %x\n", base_addr[CyRBPR]);
- printk(" CyRCOR %x\n", base_addr[CyRCOR]);
- printk(" CyTBPR %x\n", base_addr[CyTBPR]);
- printk(" CyTCOR %x\n", base_addr[CyTCOR]);
-
- local_irq_restore(flags);
-} /* show_status */
-#endif
-
-#if 0
-/* Dummy routine in mvme16x/config.c for now */
-
-/* Serial console setup. Called from linux/init/main.c */
-
-void console_setup(char *str, int *ints)
-{
- char *s;
- int baud, bits, parity;
- int cflag = 0;
-
- /* Sanity check. */
- if (ints[0] > 3 || ints[1] > 3)
- return;
-
- /* Get baud, bits and parity */
- baud = 2400;
- bits = 8;
- parity = 'n';
- if (ints[2])
- baud = ints[2];
- if ((s = strchr(str, ','))) {
- do {
- s++;
- } while (*s >= '0' && *s <= '9');
- if (*s)
- parity = *s++;
- if (*s)
- bits = *s - '0';
- }
-
- /* Now construct a cflag setting. */
- switch (baud) {
- case 1200:
- cflag |= B1200;
- break;
- case 9600:
- cflag |= B9600;
- break;
- case 19200:
- cflag |= B19200;
- break;
- case 38400:
- cflag |= B38400;
- break;
- case 2400:
- default:
- cflag |= B2400;
- break;
- }
- switch (bits) {
- case 7:
- cflag |= CS7;
- break;
- default:
- case 8:
- cflag |= CS8;
- break;
- }
- switch (parity) {
- case 'o':
- case 'O':
- cflag |= PARODD;
- break;
- case 'e':
- case 'E':
- cflag |= PARENB;
- break;
- }
-
- serial_console_info = &cy_port[ints[1]];
- serial_console_cflag = cflag;
- serial_console = ints[1] + 64; /*callout_driver.minor_start */
-}
-#endif
-
-/*
- * The following is probably out of date for 2.1.x serial console stuff.
- *
- * The console is registered early on from arch/m68k/kernel/setup.c, and
- * it therefore relies on the chip being setup correctly by 166-Bug. This
- * seems reasonable, as the serial port has been used to invoke the system
- * boot. It also means that this function must not rely on any data
- * initialisation performed by serial167_init() etc.
- *
- * Of course, once the console has been registered, we had better ensure
- * that serial167_init() doesn't leave the chip non-functional.
- *
- * The console must be locked when we get here.
- */
-
-void serial167_console_write(struct console *co, const char *str,
- unsigned count)
-{
- volatile unsigned char *base_addr = (u_char *) BASE_ADDR;
- unsigned long flags;
- volatile u_char sink;
- u_char ier;
- int port;
- u_char do_lf = 0;
- int i = 0;
-
- local_irq_save(flags);
-
- /* Ensure transmitter is enabled! */
-
- port = 0;
- base_addr[CyCAR] = (u_char) port;
- while (base_addr[CyCCR])
- ;
- base_addr[CyCCR] = CyENB_XMTR;
-
- ier = base_addr[CyIER];
- base_addr[CyIER] = CyTxMpty;
-
- while (1) {
- if (pcc2chip[PccSCCTICR] & 0x20) {
- /* We have a Tx int. Acknowledge it */
- sink = pcc2chip[PccTPIACKR];
- if ((base_addr[CyLICR] >> 2) == port) {
- if (i == count) {
- /* Last char of string is now output */
- base_addr[CyTEOIR] = CyNOTRANS;
- break;
- }
- if (do_lf) {
- base_addr[CyTDR] = '\n';
- str++;
- i++;
- do_lf = 0;
- } else if (*str == '\n') {
- base_addr[CyTDR] = '\r';
- do_lf = 1;
- } else {
- base_addr[CyTDR] = *str++;
- i++;
- }
- base_addr[CyTEOIR] = 0;
- } else
- base_addr[CyTEOIR] = CyNOTRANS;
- }
- }
-
- base_addr[CyIER] = ier;
-
- local_irq_restore(flags);
-}
-
-static struct tty_driver *serial167_console_device(struct console *c,
- int *index)
-{
- *index = c->index;
- return cy_serial_driver;
-}
-
-static struct console sercons = {
- .name = "ttyS",
- .write = serial167_console_write,
- .device = serial167_console_device,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-static int __init serial167_console_init(void)
-{
- if (vme_brdtype == VME_TYPE_MVME166 ||
- vme_brdtype == VME_TYPE_MVME167 ||
- vme_brdtype == VME_TYPE_MVME177) {
- mvme167_serial_console_setup(0);
- register_console(&sercons);
- }
- return 0;
-}
-
-console_initcall(serial167_console_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
deleted file mode 100644
index 47e5753..0000000
--- a/drivers/char/specialix.c
+++ /dev/null
@@ -1,2368 +0,0 @@
-/*
- * specialix.c -- specialix IO8+ multiport serial driver.
- *
- * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
- * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- * Specialix pays for the development and support of this driver.
- * Please DO contact io8-linux@specialix.co.uk if you require
- * support. But please read the documentation (specialix.txt)
- * first.
- *
- * This driver was developped in the BitWizard linux device
- * driver service. If you require a linux device driver for your
- * product, please contact devices@BitWizard.nl for a quote.
- *
- * This code is firmly based on the riscom/8 serial driver,
- * written by Dmitry Gorodchanin. The specialix IO8+ card
- * programming information was obtained from the CL-CD1865 Data
- * Book, and Specialix document number 6200059: IO8+ Hardware
- * Functional Specification.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- * USA.
- *
- * Revision history:
- *
- * Revision 1.0: April 1st 1997.
- * Initial release for alpha testing.
- * Revision 1.1: April 14th 1997.
- * Incorporated Richard Hudsons suggestions,
- * removed some debugging printk's.
- * Revision 1.2: April 15th 1997.
- * Ported to 2.1.x kernels.
- * Revision 1.3: April 17th 1997
- * Backported to 2.0. (Compatibility macros).
- * Revision 1.4: April 18th 1997
- * Fixed DTR/RTS bug that caused the card to indicate
- * "don't send data" to a modem after the password prompt.
- * Fixed bug for premature (fake) interrupts.
- * Revision 1.5: April 19th 1997
- * fixed a minor typo in the header file, cleanup a little.
- * performance warnings are now MAXed at once per minute.
- * Revision 1.6: May 23 1997
- * Changed the specialix=... format to include interrupt.
- * Revision 1.7: May 27 1997
- * Made many more debug printk's a compile time option.
- * Revision 1.8: Jul 1 1997
- * port to linux-2.1.43 kernel.
- * Revision 1.9: Oct 9 1998
- * Added stuff for the IO8+/PCI version.
- * Revision 1.10: Oct 22 1999 / Jan 21 2000.
- * Added stuff for setserial.
- * Nicolas Mailhot (Nicolas.Mailhot@email.enst.fr)
- *
- */
-
-#define VERSION "1.11"
-
-
-/*
- * There is a bunch of documentation about the card, jumpers, config
- * settings, restrictions, cables, device names and numbers in
- * Documentation/serial/specialix.txt
- */
-
-#include <linux/module.h>
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/uaccess.h>
-#include <linux/gfp.h>
-
-#include "specialix_io8.h"
-#include "cd1865.h"
-
-
-/*
- This driver can spew a whole lot of debugging output at you. If you
- need maximum performance, you should disable the DEBUG define. To
- aid in debugging in the field, I'm leaving the compile-time debug
- features enabled, and disable them "runtime". That allows me to
- instruct people with problems to enable debugging without requiring
- them to recompile...
-*/
-#define DEBUG
-
-static int sx_debug;
-static int sx_rxfifo = SPECIALIX_RXFIFO;
-static int sx_rtscts;
-
-#ifdef DEBUG
-#define dprintk(f, str...) if (sx_debug & f) printk(str)
-#else
-#define dprintk(f, str...) /* nothing */
-#endif
-
-#define SX_DEBUG_FLOW 0x0001
-#define SX_DEBUG_DATA 0x0002
-#define SX_DEBUG_PROBE 0x0004
-#define SX_DEBUG_CHAN 0x0008
-#define SX_DEBUG_INIT 0x0010
-#define SX_DEBUG_RX 0x0020
-#define SX_DEBUG_TX 0x0040
-#define SX_DEBUG_IRQ 0x0080
-#define SX_DEBUG_OPEN 0x0100
-#define SX_DEBUG_TERMIOS 0x0200
-#define SX_DEBUG_SIGNALS 0x0400
-#define SX_DEBUG_FIFO 0x0800
-
-
-#define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
-#define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__)
-
-
-/* Configurable options: */
-
-/* Am I paranoid or not ? ;-) */
-#define SPECIALIX_PARANOIA_CHECK
-
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#undef SX_REPORT_FIFO
-#undef SX_REPORT_OVERRUN
-
-
-
-
-#define SPECIALIX_LEGAL_FLAGS \
- (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \
- ASYNC_SPD_HI | ASYNC_SPEED_VHI | ASYNC_SESSION_LOCKOUT | \
- ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP)
-
-static struct tty_driver *specialix_driver;
-
-static struct specialix_board sx_board[SX_NBOARD] = {
- { 0, SX_IOBASE1, 9, },
- { 0, SX_IOBASE2, 11, },
- { 0, SX_IOBASE3, 12, },
- { 0, SX_IOBASE4, 15, },
-};
-
-static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
-
-
-static int sx_paranoia_check(struct specialix_port const *port,
- char *name, const char *routine)
-{
-#ifdef SPECIALIX_PARANOIA_CHECK
- static const char *badmagic = KERN_ERR
- "sx: Warning: bad specialix port magic number for device %s in %s\n";
- static const char *badinfo = KERN_ERR
- "sx: Warning: null specialix port for device %s in %s\n";
-
- if (!port) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (port->magic != SPECIALIX_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-#endif
- return 0;
-}
-
-
-/*
- *
- * Service functions for specialix IO8+ driver.
- *
- */
-
-/* Get board number from pointer */
-static inline int board_No(struct specialix_board *bp)
-{
- return bp - sx_board;
-}
-
-
-/* Get port number from pointer */
-static inline int port_No(struct specialix_port const *port)
-{
- return SX_PORT(port - sx_port);
-}
-
-
-/* Get pointer to board from pointer to port */
-static inline struct specialix_board *port_Board(
- struct specialix_port const *port)
-{
- return &sx_board[SX_BOARD(port - sx_port)];
-}
-
-
-/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in(struct specialix_board *bp,
- unsigned short reg)
-{
- bp->reg = reg | 0x80;
- outb(reg | 0x80, bp->base + SX_ADDR_REG);
- return inb(bp->base + SX_DATA_REG);
-}
-
-
-/* Output Byte to CL CD186x register */
-static inline void sx_out(struct specialix_board *bp, unsigned short reg,
- unsigned char val)
-{
- bp->reg = reg | 0x80;
- outb(reg | 0x80, bp->base + SX_ADDR_REG);
- outb(val, bp->base + SX_DATA_REG);
-}
-
-
-/* Input Byte from CL CD186x register */
-static inline unsigned char sx_in_off(struct specialix_board *bp,
- unsigned short reg)
-{
- bp->reg = reg;
- outb(reg, bp->base + SX_ADDR_REG);
- return inb(bp->base + SX_DATA_REG);
-}
-
-
-/* Output Byte to CL CD186x register */
-static inline void sx_out_off(struct specialix_board *bp,
- unsigned short reg, unsigned char val)
-{
- bp->reg = reg;
- outb(reg, bp->base + SX_ADDR_REG);
- outb(val, bp->base + SX_DATA_REG);
-}
-
-
-/* Wait for Channel Command Register ready */
-static void sx_wait_CCR(struct specialix_board *bp)
-{
- unsigned long delay, flags;
- unsigned char ccr;
-
- for (delay = SX_CCR_TIMEOUT; delay; delay--) {
- spin_lock_irqsave(&bp->lock, flags);
- ccr = sx_in(bp, CD186x_CCR);
- spin_unlock_irqrestore(&bp->lock, flags);
- if (!ccr)
- return;
- udelay(1);
- }
-
- printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-
-/* Wait for Channel Command Register ready */
-static void sx_wait_CCR_off(struct specialix_board *bp)
-{
- unsigned long delay;
- unsigned char crr;
- unsigned long flags;
-
- for (delay = SX_CCR_TIMEOUT; delay; delay--) {
- spin_lock_irqsave(&bp->lock, flags);
- crr = sx_in_off(bp, CD186x_CCR);
- spin_unlock_irqrestore(&bp->lock, flags);
- if (!crr)
- return;
- udelay(1);
- }
-
- printk(KERN_ERR "sx%d: Timeout waiting for CCR.\n", board_No(bp));
-}
-
-
-/*
- * specialix IO8+ IO range functions.
- */
-
-static int sx_request_io_range(struct specialix_board *bp)
-{
- return request_region(bp->base,
- bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
- "specialix IO8+") == NULL;
-}
-
-
-static void sx_release_io_range(struct specialix_board *bp)
-{
- release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
- SX_PCI_IO_SPACE : SX_IO_SPACE);
-}
-
-
-/* Set the IRQ using the RTS lines that run to the PAL on the board.... */
-static int sx_set_irq(struct specialix_board *bp)
-{
- int virq;
- int i;
- unsigned long flags;
-
- if (bp->flags & SX_BOARD_IS_PCI)
- return 1;
- switch (bp->irq) {
- /* In the same order as in the docs... */
- case 15:
- virq = 0;
- break;
- case 12:
- virq = 1;
- break;
- case 11:
- virq = 2;
- break;
- case 9:
- virq = 3;
- break;
- default:printk(KERN_ERR
- "Speclialix: cannot set irq to %d.\n", bp->irq);
- return 0;
- }
- spin_lock_irqsave(&bp->lock, flags);
- for (i = 0; i < 2; i++) {
- sx_out(bp, CD186x_CAR, i);
- sx_out(bp, CD186x_MSVRTS, ((virq >> i) & 0x1)? MSVR_RTS:0);
- }
- spin_unlock_irqrestore(&bp->lock, flags);
- return 1;
-}
-
-
-/* Reset and setup CD186x chip */
-static int sx_init_CD186x(struct specialix_board *bp)
-{
- unsigned long flags;
- int scaler;
- int rv = 1;
-
- func_enter();
- sx_wait_CCR_off(bp); /* Wait for CCR ready */
- spin_lock_irqsave(&bp->lock, flags);
- sx_out_off(bp, CD186x_CCR, CCR_HARDRESET); /* Reset CD186x chip */
- spin_unlock_irqrestore(&bp->lock, flags);
- msleep(50); /* Delay 0.05 sec */
- spin_lock_irqsave(&bp->lock, flags);
- sx_out_off(bp, CD186x_GIVR, SX_ID); /* Set ID for this chip */
- sx_out_off(bp, CD186x_GICR, 0); /* Clear all bits */
- sx_out_off(bp, CD186x_PILR1, SX_ACK_MINT); /* Prio for modem intr */
- sx_out_off(bp, CD186x_PILR2, SX_ACK_TINT); /* Prio for transmitter intr */
- sx_out_off(bp, CD186x_PILR3, SX_ACK_RINT); /* Prio for receiver intr */
- /* Set RegAckEn */
- sx_out_off(bp, CD186x_SRCR, sx_in(bp, CD186x_SRCR) | SRCR_REGACKEN);
-
- /* Setting up prescaler. We need 4 ticks per 1 ms */
- scaler = SX_OSCFREQ/SPECIALIX_TPS;
-
- sx_out_off(bp, CD186x_PPRH, scaler >> 8);
- sx_out_off(bp, CD186x_PPRL, scaler & 0xff);
- spin_unlock_irqrestore(&bp->lock, flags);
-
- if (!sx_set_irq(bp)) {
- /* Figure out how to pass this along... */
- printk(KERN_ERR "Cannot set irq to %d.\n", bp->irq);
- rv = 0;
- }
-
- func_exit();
- return rv;
-}
-
-
-static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
-{
- int i;
- int t;
- unsigned long flags;
-
- spin_lock_irqsave(&bp->lock, flags);
- for (i = 0, t = 0; i < 8; i++) {
- sx_out_off(bp, CD186x_CAR, i);
- if (sx_in_off(bp, reg) & bit)
- t |= 1 << i;
- }
- spin_unlock_irqrestore(&bp->lock, flags);
-
- return t;
-}
-
-
-/* Main probing routine, also sets irq. */
-static int sx_probe(struct specialix_board *bp)
-{
- unsigned char val1, val2;
- int rev;
- int chip;
-
- func_enter();
-
- if (sx_request_io_range(bp)) {
- func_exit();
- return 1;
- }
-
- /* Are the I/O ports here ? */
- sx_out_off(bp, CD186x_PPRL, 0x5a);
- udelay(1);
- val1 = sx_in_off(bp, CD186x_PPRL);
-
- sx_out_off(bp, CD186x_PPRL, 0xa5);
- udelay(1);
- val2 = sx_in_off(bp, CD186x_PPRL);
-
-
- if (val1 != 0x5a || val2 != 0xa5) {
- printk(KERN_INFO
- "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
- board_No(bp), bp->base);
- sx_release_io_range(bp);
- func_exit();
- return 1;
- }
-
- /* Check the DSR lines that Specialix uses as board
- identification */
- val1 = read_cross_byte(bp, CD186x_MSVR, MSVR_DSR);
- val2 = read_cross_byte(bp, CD186x_MSVR, MSVR_RTS);
- dprintk(SX_DEBUG_INIT,
- "sx%d: DSR lines are: %02x, rts lines are: %02x\n",
- board_No(bp), val1, val2);
-
- /* They managed to switch the bit order between the docs and
- the IO8+ card. The new PCI card now conforms to old docs.
- They changed the PCI docs to reflect the situation on the
- old card. */
- val2 = (bp->flags & SX_BOARD_IS_PCI)?0x4d : 0xb2;
- if (val1 != val2) {
- printk(KERN_INFO
- "sx%d: specialix IO8+ ID %02x at 0x%03x not found (%02x).\n",
- board_No(bp), val2, bp->base, val1);
- sx_release_io_range(bp);
- func_exit();
- return 1;
- }
-
-
- /* Reset CD186x again */
- if (!sx_init_CD186x(bp)) {
- sx_release_io_range(bp);
- func_exit();
- return 1;
- }
-
- sx_request_io_range(bp);
- bp->flags |= SX_BOARD_PRESENT;
-
- /* Chip revcode pkgtype
- GFRCR SRCR bit 7
- CD180 rev B 0x81 0
- CD180 rev C 0x82 0
- CD1864 rev A 0x82 1
- CD1865 rev A 0x83 1 -- Do not use!!! Does not work.
- CD1865 rev B 0x84 1
- -- Thanks to Gwen Wang, Cirrus Logic.
- */
-
- switch (sx_in_off(bp, CD186x_GFRCR)) {
- case 0x82:
- chip = 1864;
- rev = 'A';
- break;
- case 0x83:
- chip = 1865;
- rev = 'A';
- break;
- case 0x84:
- chip = 1865;
- rev = 'B';
- break;
- case 0x85:
- chip = 1865;
- rev = 'C';
- break; /* Does not exist at this time */
- default:
- chip = -1;
- rev = 'x';
- }
-
- dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
-
- printk(KERN_INFO
- "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
- board_No(bp), bp->base, bp->irq, chip, rev);
-
- func_exit();
- return 0;
-}
-
-/*
- *
- * Interrupt processing routines.
- * */
-
-static struct specialix_port *sx_get_port(struct specialix_board *bp,
- unsigned char const *what)
-{
- unsigned char channel;
- struct specialix_port *port = NULL;
-
- channel = sx_in(bp, CD186x_GICR) >> GICR_CHAN_OFF;
- dprintk(SX_DEBUG_CHAN, "channel: %d\n", channel);
- if (channel < CD186x_NCH) {
- port = &sx_port[board_No(bp) * SX_NPORT + channel];
- dprintk(SX_DEBUG_CHAN, "port: %d %p flags: 0x%lx\n",
- board_No(bp) * SX_NPORT + channel, port,
- port->port.flags & ASYNC_INITIALIZED);
-
- if (port->port.flags & ASYNC_INITIALIZED) {
- dprintk(SX_DEBUG_CHAN, "port: %d %p\n", channel, port);
- func_exit();
- return port;
- }
- }
- printk(KERN_INFO "sx%d: %s interrupt from invalid port %d\n",
- board_No(bp), what, channel);
- return NULL;
-}
-
-
-static void sx_receive_exc(struct specialix_board *bp)
-{
- struct specialix_port *port;
- struct tty_struct *tty;
- unsigned char status;
- unsigned char ch, flag;
-
- func_enter();
-
- port = sx_get_port(bp, "Receive");
- if (!port) {
- dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
- func_exit();
- return;
- }
- tty = port->port.tty;
-
- status = sx_in(bp, CD186x_RCSR);
-
- dprintk(SX_DEBUG_RX, "status: 0x%x\n", status);
- if (status & RCSR_OE) {
- port->overrun++;
- dprintk(SX_DEBUG_FIFO,
- "sx%d: port %d: Overrun. Total %ld overruns.\n",
- board_No(bp), port_No(port), port->overrun);
- }
- status &= port->mark_mask;
-
- /* This flip buffer check needs to be below the reading of the
- status register to reset the chip's IRQ.... */
- if (tty_buffer_request_room(tty, 1) == 0) {
- dprintk(SX_DEBUG_FIFO,
- "sx%d: port %d: Working around flip buffer overflow.\n",
- board_No(bp), port_No(port));
- func_exit();
- return;
- }
-
- ch = sx_in(bp, CD186x_RDR);
- if (!status) {
- func_exit();
- return;
- }
- if (status & RCSR_TOUT) {
- printk(KERN_INFO
- "sx%d: port %d: Receiver timeout. Hardware problems ?\n",
- board_No(bp), port_No(port));
- func_exit();
- return;
-
- } else if (status & RCSR_BREAK) {
- dprintk(SX_DEBUG_RX, "sx%d: port %d: Handling break...\n",
- board_No(bp), port_No(port));
- flag = TTY_BREAK;
- if (port->port.flags & ASYNC_SAK)
- do_SAK(tty);
-
- } else if (status & RCSR_PE)
- flag = TTY_PARITY;
-
- else if (status & RCSR_FE)
- flag = TTY_FRAME;
-
- else if (status & RCSR_OE)
- flag = TTY_OVERRUN;
-
- else
- flag = TTY_NORMAL;
-
- if (tty_insert_flip_char(tty, ch, flag))
- tty_flip_buffer_push(tty);
- func_exit();
-}
-
-
-static void sx_receive(struct specialix_board *bp)
-{
- struct specialix_port *port;
- struct tty_struct *tty;
- unsigned char count;
-
- func_enter();
-
- port = sx_get_port(bp, "Receive");
- if (port == NULL) {
- dprintk(SX_DEBUG_RX, "Hmm, couldn't find port.\n");
- func_exit();
- return;
- }
- tty = port->port.tty;
-
- count = sx_in(bp, CD186x_RDCR);
- dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count);
- port->hits[count > 8 ? 9 : count]++;
-
- while (count--)
- tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL);
- tty_flip_buffer_push(tty);
- func_exit();
-}
-
-
-static void sx_transmit(struct specialix_board *bp)
-{
- struct specialix_port *port;
- struct tty_struct *tty;
- unsigned char count;
-
- func_enter();
- port = sx_get_port(bp, "Transmit");
- if (port == NULL) {
- func_exit();
- return;
- }
- dprintk(SX_DEBUG_TX, "port: %p\n", port);
- tty = port->port.tty;
-
- if (port->IER & IER_TXEMPTY) {
- /* FIFO drained */
- sx_out(bp, CD186x_CAR, port_No(port));
- port->IER &= ~IER_TXEMPTY;
- sx_out(bp, CD186x_IER, port->IER);
- func_exit();
- return;
- }
-
- if ((port->xmit_cnt <= 0 && !port->break_length)
- || tty->stopped || tty->hw_stopped) {
- sx_out(bp, CD186x_CAR, port_No(port));
- port->IER &= ~IER_TXRDY;
- sx_out(bp, CD186x_IER, port->IER);
- func_exit();
- return;
- }
-
- if (port->break_length) {
- if (port->break_length > 0) {
- if (port->COR2 & COR2_ETC) {
- sx_out(bp, CD186x_TDR, CD186x_C_ESC);
- sx_out(bp, CD186x_TDR, CD186x_C_SBRK);
- port->COR2 &= ~COR2_ETC;
- }
- count = min_t(int, port->break_length, 0xff);
- sx_out(bp, CD186x_TDR, CD186x_C_ESC);
- sx_out(bp, CD186x_TDR, CD186x_C_DELAY);
- sx_out(bp, CD186x_TDR, count);
- port->break_length -= count;
- if (port->break_length == 0)
- port->break_length--;
- } else {
- sx_out(bp, CD186x_TDR, CD186x_C_ESC);
- sx_out(bp, CD186x_TDR, CD186x_C_EBRK);
- sx_out(bp, CD186x_COR2, port->COR2);
- sx_wait_CCR(bp);
- sx_out(bp, CD186x_CCR, CCR_CORCHG2);
- port->break_length = 0;
- }
-
- func_exit();
- return;
- }
-
- count = CD186x_NFIFO;
- do {
- sx_out(bp, CD186x_TDR, port->xmit_buf[port->xmit_tail++]);
- port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1);
- if (--port->xmit_cnt <= 0)
- break;
- } while (--count > 0);
-
- if (port->xmit_cnt <= 0) {
- sx_out(bp, CD186x_CAR, port_No(port));
- port->IER &= ~IER_TXRDY;
- sx_out(bp, CD186x_IER, port->IER);
- }
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
-
- func_exit();
-}
-
-
-static void sx_check_modem(struct specialix_board *bp)
-{
- struct specialix_port *port;
- struct tty_struct *tty;
- unsigned char mcr;
- int msvr_cd;
-
- dprintk(SX_DEBUG_SIGNALS, "Modem intr. ");
- port = sx_get_port(bp, "Modem");
- if (port == NULL)
- return;
-
- tty = port->port.tty;
-
- mcr = sx_in(bp, CD186x_MCR);
-
- if ((mcr & MCR_CDCHG)) {
- dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
- msvr_cd = sx_in(bp, CD186x_MSVR) & MSVR_CD;
- if (msvr_cd) {
- dprintk(SX_DEBUG_SIGNALS, "Waking up guys in open.\n");
- wake_up_interruptible(&port->port.open_wait);
- } else {
- dprintk(SX_DEBUG_SIGNALS, "Sending HUP.\n");
- tty_hangup(tty);
- }
- }
-
-#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
- if (mcr & MCR_CTSCHG) {
- if (sx_in(bp, CD186x_MSVR) & MSVR_CTS) {
- tty->hw_stopped = 0;
- port->IER |= IER_TXRDY;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
- } else {
- tty->hw_stopped = 1;
- port->IER &= ~IER_TXRDY;
- }
- sx_out(bp, CD186x_IER, port->IER);
- }
- if (mcr & MCR_DSSXHG) {
- if (sx_in(bp, CD186x_MSVR) & MSVR_DSR) {
- tty->hw_stopped = 0;
- port->IER |= IER_TXRDY;
- if (port->xmit_cnt <= port->wakeup_chars)
- tty_wakeup(tty);
- } else {
- tty->hw_stopped = 1;
- port->IER &= ~IER_TXRDY;
- }
- sx_out(bp, CD186x_IER, port->IER);
- }
-#endif /* SPECIALIX_BRAIN_DAMAGED_CTS */
-
- /* Clear change bits */
- sx_out(bp, CD186x_MCR, 0);
-}
-
-
-/* The main interrupt processing routine */
-static irqreturn_t sx_interrupt(int dummy, void *dev_id)
-{
- unsigned char status;
- unsigned char ack;
- struct specialix_board *bp = dev_id;
- unsigned long loop = 0;
- int saved_reg;
- unsigned long flags;
-
- func_enter();
-
- spin_lock_irqsave(&bp->lock, flags);
-
- dprintk(SX_DEBUG_FLOW, "enter %s port %d room: %ld\n", __func__,
- port_No(sx_get_port(bp, "INT")),
- SERIAL_XMIT_SIZE - sx_get_port(bp, "ITN")->xmit_cnt - 1);
- if (!(bp->flags & SX_BOARD_ACTIVE)) {
- dprintk(SX_DEBUG_IRQ, "sx: False interrupt. irq %d.\n",
- bp->irq);
- spin_unlock_irqrestore(&bp->lock, flags);
- func_exit();
- return IRQ_NONE;
- }
-
- saved_reg = bp->reg;
-
- while (++loop < 16) {
- status = sx_in(bp, CD186x_SRSR) &
- (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
- if (status == 0)
- break;
- if (status & SRSR_RREQint) {
- ack = sx_in(bp, CD186x_RRAR);
-
- if (ack == (SX_ID | GIVR_IT_RCV))
- sx_receive(bp);
- else if (ack == (SX_ID | GIVR_IT_REXC))
- sx_receive_exc(bp);
- else
- printk(KERN_ERR
- "sx%d: status: 0x%x Bad receive ack 0x%02x.\n",
- board_No(bp), status, ack);
-
- } else if (status & SRSR_TREQint) {
- ack = sx_in(bp, CD186x_TRAR);
-
- if (ack == (SX_ID | GIVR_IT_TX))
- sx_transmit(bp);
- else
- printk(KERN_ERR "sx%d: status: 0x%x Bad transmit ack 0x%02x. port: %d\n",
- board_No(bp), status, ack,
- port_No(sx_get_port(bp, "Int")));
- } else if (status & SRSR_MREQint) {
- ack = sx_in(bp, CD186x_MRAR);
-
- if (ack == (SX_ID | GIVR_IT_MODEM))
- sx_check_modem(bp);
- else
- printk(KERN_ERR
- "sx%d: status: 0x%x Bad modem ack 0x%02x.\n",
- board_No(bp), status, ack);
-
- }
-
- sx_out(bp, CD186x_EOIR, 0); /* Mark end of interrupt */
- }
- bp->reg = saved_reg;
- outb(bp->reg, bp->base + SX_ADDR_REG);
- spin_unlock_irqrestore(&bp->lock, flags);
- func_exit();
- return IRQ_HANDLED;
-}
-
-
-/*
- * Routines for open & close processing.
- */
-
-static void turn_ints_off(struct specialix_board *bp)
-{
- unsigned long flags;
-
- func_enter();
- spin_lock_irqsave(&bp->lock, flags);
- (void) sx_in_off(bp, 0); /* Turn off interrupts. */
- spin_unlock_irqrestore(&bp->lock, flags);
-
- func_exit();
-}
-
-static void turn_ints_on(struct specialix_board *bp)
-{
- unsigned long flags;
-
- func_enter();
-
- spin_lock_irqsave(&bp->lock, flags);
- (void) sx_in(bp, 0); /* Turn ON interrupts. */
- spin_unlock_irqrestore(&bp->lock, flags);
-
- func_exit();
-}
-
-
-/* Called with disabled interrupts */
-static int sx_setup_board(struct specialix_board *bp)
-{
- int error;
-
- if (bp->flags & SX_BOARD_ACTIVE)
- return 0;
-
- if (bp->flags & SX_BOARD_IS_PCI)
- error = request_irq(bp->irq, sx_interrupt,
- IRQF_DISABLED | IRQF_SHARED, "specialix IO8+", bp);
- else
- error = request_irq(bp->irq, sx_interrupt,
- IRQF_DISABLED, "specialix IO8+", bp);
-
- if (error)
- return error;
-
- turn_ints_on(bp);
- bp->flags |= SX_BOARD_ACTIVE;
-
- return 0;
-}
-
-
-/* Called with disabled interrupts */
-static void sx_shutdown_board(struct specialix_board *bp)
-{
- func_enter();
-
- if (!(bp->flags & SX_BOARD_ACTIVE)) {
- func_exit();
- return;
- }
-
- bp->flags &= ~SX_BOARD_ACTIVE;
-
- dprintk(SX_DEBUG_IRQ, "Freeing IRQ%d for board %d.\n",
- bp->irq, board_No(bp));
- free_irq(bp->irq, bp);
- turn_ints_off(bp);
- func_exit();
-}
-
-static unsigned int sx_crtscts(struct tty_struct *tty)
-{
- if (sx_rtscts)
- return C_CRTSCTS(tty);
- return 1;
-}
-
-/*
- * Setting up port characteristics.
- * Must be called with disabled interrupts
- */
-static void sx_change_speed(struct specialix_board *bp,
- struct specialix_port *port)
-{
- struct tty_struct *tty;
- unsigned long baud;
- long tmp;
- unsigned char cor1 = 0, cor3 = 0;
- unsigned char mcor1 = 0, mcor2 = 0;
- static unsigned long again;
- unsigned long flags;
-
- func_enter();
-
- tty = port->port.tty;
- if (!tty || !tty->termios) {
- func_exit();
- return;
- }
-
- port->IER = 0;
- port->COR2 = 0;
- /* Select port on the board */
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
-
- /* The Specialix board doens't implement the RTS lines.
- They are used to set the IRQ level. Don't touch them. */
- if (sx_crtscts(tty))
- port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
- else
- port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
- spin_unlock_irqrestore(&bp->lock, flags);
- dprintk(SX_DEBUG_TERMIOS, "sx: got MSVR=%02x.\n", port->MSVR);
- baud = tty_get_baud_rate(tty);
-
- if (baud == 38400) {
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- baud = 57600;
- if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baud = 115200;
- }
-
- if (!baud) {
- /* Drop DTR & exit */
- dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n");
- if (!sx_crtscts(tty)) {
- port->MSVR &= ~MSVR_DTR;
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
- } else
- dprintk(SX_DEBUG_TERMIOS, "Can't drop DTR: no DTR.\n");
- return;
- } else {
- /* Set DTR on */
- if (!sx_crtscts(tty))
- port->MSVR |= MSVR_DTR;
- }
-
- /*
- * Now we must calculate some speed depended things
- */
-
- /* Set baud rate for port */
- tmp = port->custom_divisor ;
- if (tmp)
- printk(KERN_INFO
- "sx%d: Using custom baud rate divisor %ld. \n"
- "This is an untested option, please be careful.\n",
- port_No(port), tmp);
- else
- tmp = (((SX_OSCFREQ + baud/2) / baud + CD186x_TPC/2) /
- CD186x_TPC);
-
- if (tmp < 0x10 && time_before(again, jiffies)) {
- again = jiffies + HZ * 60;
- /* Page 48 of version 2.0 of the CL-CD1865 databook */
- if (tmp >= 12) {
- printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
- "Performance degradation is possible.\n"
- "Read specialix.txt for more info.\n",
- port_No(port), tmp);
- } else {
- printk(KERN_INFO "sx%d: Baud rate divisor is %ld. \n"
- "Warning: overstressing Cirrus chip. This might not work.\n"
- "Read specialix.txt for more info.\n", port_No(port), tmp);
- }
- }
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_RBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_TBPRH, (tmp >> 8) & 0xff);
- sx_out(bp, CD186x_RBPRL, tmp & 0xff);
- sx_out(bp, CD186x_TBPRL, tmp & 0xff);
- spin_unlock_irqrestore(&bp->lock, flags);
- if (port->custom_divisor)
- baud = (SX_OSCFREQ + port->custom_divisor/2) /
- port->custom_divisor;
- baud = (baud + 5) / 10; /* Estimated CPS */
-
- /* Two timer ticks seems enough to wakeup something like SLIP driver */
- tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
- port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ?
- SERIAL_XMIT_SIZE - 1 : tmp);
-
- /* Receiver timeout will be transmission time for 1.5 chars */
- tmp = (SPECIALIX_TPS + SPECIALIX_TPS/2 + baud/2) / baud;
- tmp = (tmp > 0xff) ? 0xff : tmp;
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_RTPR, tmp);
- spin_unlock_irqrestore(&bp->lock, flags);
- switch (C_CSIZE(tty)) {
- case CS5:
- cor1 |= COR1_5BITS;
- break;
- case CS6:
- cor1 |= COR1_6BITS;
- break;
- case CS7:
- cor1 |= COR1_7BITS;
- break;
- case CS8:
- cor1 |= COR1_8BITS;
- break;
- }
-
- if (C_CSTOPB(tty))
- cor1 |= COR1_2SB;
-
- cor1 |= COR1_IGNORE;
- if (C_PARENB(tty)) {
- cor1 |= COR1_NORMPAR;
- if (C_PARODD(tty))
- cor1 |= COR1_ODDP;
- if (I_INPCK(tty))
- cor1 &= ~COR1_IGNORE;
- }
- /* Set marking of some errors */
- port->mark_mask = RCSR_OE | RCSR_TOUT;
- if (I_INPCK(tty))
- port->mark_mask |= RCSR_FE | RCSR_PE;
- if (I_BRKINT(tty) || I_PARMRK(tty))
- port->mark_mask |= RCSR_BREAK;
- if (I_IGNPAR(tty))
- port->mark_mask &= ~(RCSR_FE | RCSR_PE);
- if (I_IGNBRK(tty)) {
- port->mark_mask &= ~RCSR_BREAK;
- if (I_IGNPAR(tty))
- /* Real raw mode. Ignore all */
- port->mark_mask &= ~RCSR_OE;
- }
- /* Enable Hardware Flow Control */
- if (C_CRTSCTS(tty)) {
-#ifdef SPECIALIX_BRAIN_DAMAGED_CTS
- port->IER |= IER_DSR | IER_CTS;
- mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD;
- mcor2 |= MCOR2_DSROD | MCOR2_CTSOD;
- spin_lock_irqsave(&bp->lock, flags);
- tty->hw_stopped = !(sx_in(bp, CD186x_MSVR) &
- (MSVR_CTS|MSVR_DSR));
- spin_unlock_irqrestore(&bp->lock, flags);
-#else
- port->COR2 |= COR2_CTSAE;
-#endif
- }
- /* Enable Software Flow Control. FIXME: I'm not sure about this */
- /* Some people reported that it works, but I still doubt it */
- if (I_IXON(tty)) {
- port->COR2 |= COR2_TXIBE;
- cor3 |= (COR3_FCT | COR3_SCDE);
- if (I_IXANY(tty))
- port->COR2 |= COR2_IXM;
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_SCHR1, START_CHAR(tty));
- sx_out(bp, CD186x_SCHR2, STOP_CHAR(tty));
- sx_out(bp, CD186x_SCHR3, START_CHAR(tty));
- sx_out(bp, CD186x_SCHR4, STOP_CHAR(tty));
- spin_unlock_irqrestore(&bp->lock, flags);
- }
- if (!C_CLOCAL(tty)) {
- /* Enable CD check */
- port->IER |= IER_CD;
- mcor1 |= MCOR1_CDZD;
- mcor2 |= MCOR2_CDOD;
- }
-
- if (C_CREAD(tty))
- /* Enable receiver */
- port->IER |= IER_RXD;
-
- /* Set input FIFO size (1-8 bytes) */
- cor3 |= sx_rxfifo;
- /* Setting up CD186x channel registers */
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_COR1, cor1);
- sx_out(bp, CD186x_COR2, port->COR2);
- sx_out(bp, CD186x_COR3, cor3);
- spin_unlock_irqrestore(&bp->lock, flags);
- /* Make CD186x know about registers change */
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
- /* Setting up modem option registers */
- dprintk(SX_DEBUG_TERMIOS, "Mcor1 = %02x, mcor2 = %02x.\n",
- mcor1, mcor2);
- sx_out(bp, CD186x_MCOR1, mcor1);
- sx_out(bp, CD186x_MCOR2, mcor2);
- spin_unlock_irqrestore(&bp->lock, flags);
- /* Enable CD186x transmitter & receiver */
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_TXEN | CCR_RXEN);
- /* Enable interrupts */
- sx_out(bp, CD186x_IER, port->IER);
- /* And finally set the modem lines... */
- sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
-
- func_exit();
-}
-
-
-/* Must be called with interrupts enabled */
-static int sx_setup_port(struct specialix_board *bp,
- struct specialix_port *port)
-{
- unsigned long flags;
-
- func_enter();
-
- if (port->port.flags & ASYNC_INITIALIZED) {
- func_exit();
- return 0;
- }
-
- if (!port->xmit_buf) {
- /* We may sleep in get_zeroed_page() */
- unsigned long tmp;
-
- tmp = get_zeroed_page(GFP_KERNEL);
- if (tmp == 0L) {
- func_exit();
- return -ENOMEM;
- }
-
- if (port->xmit_buf) {
- free_page(tmp);
- func_exit();
- return -ERESTARTSYS;
- }
- port->xmit_buf = (unsigned char *) tmp;
- }
-
- spin_lock_irqsave(&port->lock, flags);
-
- if (port->port.tty)
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
-
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- sx_change_speed(bp, port);
- port->port.flags |= ASYNC_INITIALIZED;
-
- spin_unlock_irqrestore(&port->lock, flags);
-
-
- func_exit();
- return 0;
-}
-
-
-/* Must be called with interrupts disabled */
-static void sx_shutdown_port(struct specialix_board *bp,
- struct specialix_port *port)
-{
- struct tty_struct *tty;
- int i;
- unsigned long flags;
-
- func_enter();
-
- if (!(port->port.flags & ASYNC_INITIALIZED)) {
- func_exit();
- return;
- }
-
- if (sx_debug & SX_DEBUG_FIFO) {
- dprintk(SX_DEBUG_FIFO,
- "sx%d: port %d: %ld overruns, FIFO hits [ ",
- board_No(bp), port_No(port), port->overrun);
- for (i = 0; i < 10; i++)
- dprintk(SX_DEBUG_FIFO, "%ld ", port->hits[i]);
- dprintk(SX_DEBUG_FIFO, "].\n");
- }
-
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
-
- /* Select port */
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
-
- tty = port->port.tty;
- if (tty == NULL || C_HUPCL(tty)) {
- /* Drop DTR */
- sx_out(bp, CD186x_MSVDTR, 0);
- }
- spin_unlock_irqrestore(&bp->lock, flags);
- /* Reset port */
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_SOFTRESET);
- /* Disable all interrupts from this port */
- port->IER = 0;
- sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
- port->port.flags &= ~ASYNC_INITIALIZED;
-
- if (!bp->count)
- sx_shutdown_board(bp);
- func_exit();
-}
-
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
- struct specialix_port *port)
-{
- DECLARE_WAITQUEUE(wait, current);
- struct specialix_board *bp = port_Board(port);
- int retval;
- int do_clocal = 0;
- int CD;
- unsigned long flags;
-
- func_enter();
-
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->port.close_wait);
- if (port->port.flags & ASYNC_HUP_NOTIFY) {
- func_exit();
- return -EAGAIN;
- } else {
- func_exit();
- return -ERESTARTSYS;
- }
- }
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
- func_exit();
- return 0;
- }
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, info->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
- add_wait_queue(&port->port.open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->port.count--;
- spin_unlock_irqrestore(&port->lock, flags);
- port->port.blocked_open++;
- while (1) {
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
- CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
- if (sx_crtscts(tty)) {
- /* Activate RTS */
- port->MSVR |= MSVR_DTR; /* WTF? */
- sx_out(bp, CD186x_MSVR, port->MSVR);
- } else {
- /* Activate DTR */
- port->MSVR |= MSVR_DTR;
- sx_out(bp, CD186x_MSVR, port->MSVR);
- }
- spin_unlock_irqrestore(&bp->lock, flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(port->port.flags & ASYNC_INITIALIZED)) {
- if (port->port.flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(port->port.flags & ASYNC_CLOSING) &&
- (do_clocal || CD))
- break;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- tty_unlock();
- schedule();
- tty_lock();
- }
-
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->port.open_wait, &wait);
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp))
- port->port.count++;
- port->port.blocked_open--;
- spin_unlock_irqrestore(&port->lock, flags);
- if (retval) {
- func_exit();
- return retval;
- }
-
- port->port.flags |= ASYNC_NORMAL_ACTIVE;
- func_exit();
- return 0;
-}
-
-
-static int sx_open(struct tty_struct *tty, struct file *filp)
-{
- int board;
- int error;
- struct specialix_port *port;
- struct specialix_board *bp;
- int i;
- unsigned long flags;
-
- func_enter();
-
- board = SX_BOARD(tty->index);
-
- if (board >= SX_NBOARD || !(sx_board[board].flags & SX_BOARD_PRESENT)) {
- func_exit();
- return -ENODEV;
- }
-
- bp = &sx_board[board];
- port = sx_port + board * SX_NPORT + SX_PORT(tty->index);
- port->overrun = 0;
- for (i = 0; i < 10; i++)
- port->hits[i] = 0;
-
- dprintk(SX_DEBUG_OPEN,
- "Board = %d, bp = %p, port = %p, portno = %d.\n",
- board, bp, port, SX_PORT(tty->index));
-
- if (sx_paranoia_check(port, tty->name, "sx_open")) {
- func_enter();
- return -ENODEV;
- }
-
- error = sx_setup_board(bp);
- if (error) {
- func_exit();
- return error;
- }
-
- spin_lock_irqsave(&bp->lock, flags);
- port->port.count++;
- bp->count++;
- tty->driver_data = port;
- port->port.tty = tty;
- spin_unlock_irqrestore(&bp->lock, flags);
-
- error = sx_setup_port(bp, port);
- if (error) {
- func_enter();
- return error;
- }
-
- error = block_til_ready(tty, filp, port);
- if (error) {
- func_enter();
- return error;
- }
-
- func_exit();
- return 0;
-}
-
-static void sx_flush_buffer(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- unsigned long flags;
- struct specialix_board *bp;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_buffer")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
- spin_lock_irqsave(&port->lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&port->lock, flags);
- tty_wakeup(tty);
-
- func_exit();
-}
-
-static void sx_close(struct tty_struct *tty, struct file *filp)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
- unsigned long timeout;
-
- func_enter();
- if (!port || sx_paranoia_check(port, tty->name, "close")) {
- func_exit();
- return;
- }
- spin_lock_irqsave(&port->lock, flags);
-
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&port->lock, flags);
- func_exit();
- return;
- }
-
- bp = port_Board(port);
- if (tty->count == 1 && port->port.count != 1) {
- printk(KERN_ERR "sx%d: sx_close: bad port count;"
- " tty->count is 1, port count is %d\n",
- board_No(bp), port->port.count);
- port->port.count = 1;
- }
-
- if (port->port.count > 1) {
- port->port.count--;
- bp->count--;
-
- spin_unlock_irqrestore(&port->lock, flags);
-
- func_exit();
- return;
- }
- port->port.flags |= ASYNC_CLOSING;
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- spin_unlock_irqrestore(&port->lock, flags);
- dprintk(SX_DEBUG_OPEN, "Closing\n");
- if (port->port.closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->port.closing_wait);
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
- dprintk(SX_DEBUG_OPEN, "Closed\n");
- port->IER &= ~IER_RXD;
- if (port->port.flags & ASYNC_INITIALIZED) {
- port->IER &= ~IER_TXRDY;
- port->IER |= IER_TXEMPTY;
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- timeout = jiffies+HZ;
- while (port->IER & IER_TXEMPTY) {
- set_current_state(TASK_INTERRUPTIBLE);
- msleep_interruptible(jiffies_to_msecs(port->timeout));
- if (time_after(jiffies, timeout)) {
- printk(KERN_INFO "Timeout waiting for close\n");
- break;
- }
- }
-
- }
-
- if (--bp->count < 0) {
- printk(KERN_ERR
- "sx%d: sx_shutdown_port: bad board count: %d port: %d\n",
- board_No(bp), bp->count, tty->index);
- bp->count = 0;
- }
- if (--port->port.count < 0) {
- printk(KERN_ERR
- "sx%d: sx_close: bad port count for tty%d: %d\n",
- board_No(bp), port_No(port), port->port.count);
- port->port.count = 0;
- }
-
- sx_shutdown_port(bp, port);
- sx_flush_buffer(tty);
- tty_ldisc_flush(tty);
- spin_lock_irqsave(&port->lock, flags);
- tty->closing = 0;
- port->port.tty = NULL;
- spin_unlock_irqrestore(&port->lock, flags);
- if (port->port.blocked_open) {
- if (port->port.close_delay)
- msleep_interruptible(
- jiffies_to_msecs(port->port.close_delay));
- wake_up_interruptible(&port->port.open_wait);
- }
- port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->port.close_wait);
-
- func_exit();
-}
-
-
-static int sx_write(struct tty_struct *tty,
- const unsigned char *buf, int count)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- int c, total = 0;
- unsigned long flags;
-
- func_enter();
- if (sx_paranoia_check(port, tty->name, "sx_write")) {
- func_exit();
- return 0;
- }
-
- bp = port_Board(port);
-
- if (!port->xmit_buf) {
- func_exit();
- return 0;
- }
-
- while (1) {
- spin_lock_irqsave(&port->lock, flags);
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - port->xmit_head));
- if (c <= 0) {
- spin_unlock_irqrestore(&port->lock, flags);
- break;
- }
- memcpy(port->xmit_buf + port->xmit_head, buf, c);
- port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
- port->xmit_cnt += c;
- spin_unlock_irqrestore(&port->lock, flags);
-
- buf += c;
- count -= c;
- total += c;
- }
-
- spin_lock_irqsave(&bp->lock, flags);
- if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
- !(port->IER & IER_TXRDY)) {
- port->IER |= IER_TXRDY;
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_IER, port->IER);
- }
- spin_unlock_irqrestore(&bp->lock, flags);
- func_exit();
-
- return total;
-}
-
-
-static int sx_put_char(struct tty_struct *tty, unsigned char ch)
-{
- struct specialix_port *port = tty->driver_data;
- unsigned long flags;
- struct specialix_board *bp;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_put_char")) {
- func_exit();
- return 0;
- }
- dprintk(SX_DEBUG_TX, "check tty: %p %p\n", tty, port->xmit_buf);
- if (!port->xmit_buf) {
- func_exit();
- return 0;
- }
- bp = port_Board(port);
- spin_lock_irqsave(&port->lock, flags);
-
- dprintk(SX_DEBUG_TX, "xmit_cnt: %d xmit_buf: %p\n",
- port->xmit_cnt, port->xmit_buf);
- if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1 || !port->xmit_buf) {
- spin_unlock_irqrestore(&port->lock, flags);
- dprintk(SX_DEBUG_TX, "Exit size\n");
- func_exit();
- return 0;
- }
- dprintk(SX_DEBUG_TX, "Handle xmit: %p %p\n", port, port->xmit_buf);
- port->xmit_buf[port->xmit_head++] = ch;
- port->xmit_head &= SERIAL_XMIT_SIZE - 1;
- port->xmit_cnt++;
- spin_unlock_irqrestore(&port->lock, flags);
-
- func_exit();
- return 1;
-}
-
-
-static void sx_flush_chars(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- unsigned long flags;
- struct specialix_board *bp = port_Board(port);
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_flush_chars")) {
- func_exit();
- return;
- }
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf) {
- func_exit();
- return;
- }
- spin_lock_irqsave(&bp->lock, flags);
- port->IER |= IER_TXRDY;
- sx_out(port_Board(port), CD186x_CAR, port_No(port));
- sx_out(port_Board(port), CD186x_IER, port->IER);
- spin_unlock_irqrestore(&bp->lock, flags);
-
- func_exit();
-}
-
-
-static int sx_write_room(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- int ret;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_write_room")) {
- func_exit();
- return 0;
- }
-
- ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
-
- func_exit();
- return ret;
-}
-
-
-static int sx_chars_in_buffer(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_chars_in_buffer")) {
- func_exit();
- return 0;
- }
- func_exit();
- return port->xmit_cnt;
-}
-
-static int sx_tiocmget(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned char status;
- unsigned int result;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, __func__)) {
- func_exit();
- return -ENODEV;
- }
-
- bp = port_Board(port);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
- status = sx_in(bp, CD186x_MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
- dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
- port_No(port), status, sx_in(bp, CD186x_CAR));
- dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
- if (sx_crtscts(port->port.tty)) {
- result = TIOCM_DTR | TIOCM_DSR
- | ((status & MSVR_DTR) ? TIOCM_RTS : 0)
- | ((status & MSVR_CD) ? TIOCM_CAR : 0)
- | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
- } else {
- result = TIOCM_RTS | TIOCM_DSR
- | ((status & MSVR_DTR) ? TIOCM_DTR : 0)
- | ((status & MSVR_CD) ? TIOCM_CAR : 0)
- | ((status & MSVR_CTS) ? TIOCM_CTS : 0);
- }
-
- func_exit();
-
- return result;
-}
-
-
-static int sx_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct specialix_port *port = tty->driver_data;
- unsigned long flags;
- struct specialix_board *bp;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, __func__)) {
- func_exit();
- return -ENODEV;
- }
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&port->lock, flags);
- if (sx_crtscts(port->port.tty)) {
- if (set & TIOCM_RTS)
- port->MSVR |= MSVR_DTR;
- } else {
- if (set & TIOCM_DTR)
- port->MSVR |= MSVR_DTR;
- }
- if (sx_crtscts(port->port.tty)) {
- if (clear & TIOCM_RTS)
- port->MSVR &= ~MSVR_DTR;
- } else {
- if (clear & TIOCM_DTR)
- port->MSVR &= ~MSVR_DTR;
- }
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock(&bp->lock);
- spin_unlock_irqrestore(&port->lock, flags);
- func_exit();
- return 0;
-}
-
-
-static int sx_send_break(struct tty_struct *tty, int length)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp = port_Board(port);
- unsigned long flags;
-
- func_enter();
- if (length == 0 || length == -1)
- return -EOPNOTSUPP;
-
- spin_lock_irqsave(&port->lock, flags);
- port->break_length = SPECIALIX_TPS / HZ * length;
- port->COR2 |= COR2_ETC;
- port->IER |= IER_TXRDY;
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_COR2, port->COR2);
- sx_out(bp, CD186x_IER, port->IER);
- spin_unlock(&bp->lock);
- spin_unlock_irqrestore(&port->lock, flags);
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_CORCHG2);
- spin_unlock_irqrestore(&bp->lock, flags);
- sx_wait_CCR(bp);
-
- func_exit();
- return 0;
-}
-
-
-static int sx_set_serial_info(struct specialix_port *port,
- struct serial_struct __user *newinfo)
-{
- struct serial_struct tmp;
- struct specialix_board *bp = port_Board(port);
- int change_speed;
-
- func_enter();
-
- if (copy_from_user(&tmp, newinfo, sizeof(tmp))) {
- func_enter();
- return -EFAULT;
- }
-
- mutex_lock(&port->port.mutex);
- change_speed = ((port->port.flags & ASYNC_SPD_MASK) !=
- (tmp.flags & ASYNC_SPD_MASK));
- change_speed |= (tmp.custom_divisor != port->custom_divisor);
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((tmp.close_delay != port->port.close_delay) ||
- (tmp.closing_wait != port->port.closing_wait) ||
- ((tmp.flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK))) {
- func_exit();
- mutex_unlock(&port->port.mutex);
- return -EPERM;
- }
- port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
- (tmp.flags & ASYNC_USR_MASK));
- port->custom_divisor = tmp.custom_divisor;
- } else {
- port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
- (tmp.flags & ASYNC_FLAGS));
- port->port.close_delay = tmp.close_delay;
- port->port.closing_wait = tmp.closing_wait;
- port->custom_divisor = tmp.custom_divisor;
- }
- if (change_speed)
- sx_change_speed(bp, port);
-
- func_exit();
- mutex_unlock(&port->port.mutex);
- return 0;
-}
-
-
-static int sx_get_serial_info(struct specialix_port *port,
- struct serial_struct __user *retinfo)
-{
- struct serial_struct tmp;
- struct specialix_board *bp = port_Board(port);
-
- func_enter();
-
- memset(&tmp, 0, sizeof(tmp));
- mutex_lock(&port->port.mutex);
- tmp.type = PORT_CIRRUS;
- tmp.line = port - sx_port;
- tmp.port = bp->base;
- tmp.irq = bp->irq;
- tmp.flags = port->port.flags;
- tmp.baud_base = (SX_OSCFREQ + CD186x_TPC/2) / CD186x_TPC;
- tmp.close_delay = port->port.close_delay * HZ/100;
- tmp.closing_wait = port->port.closing_wait * HZ/100;
- tmp.custom_divisor = port->custom_divisor;
- tmp.xmit_fifo_size = CD186x_NFIFO;
- mutex_unlock(&port->port.mutex);
- if (copy_to_user(retinfo, &tmp, sizeof(tmp))) {
- func_exit();
- return -EFAULT;
- }
-
- func_exit();
- return 0;
-}
-
-
-static int sx_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct specialix_port *port = tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_ioctl")) {
- func_exit();
- return -ENODEV;
- }
-
- switch (cmd) {
- case TIOCGSERIAL:
- func_exit();
- return sx_get_serial_info(port, argp);
- case TIOCSSERIAL:
- func_exit();
- return sx_set_serial_info(port, argp);
- default:
- func_exit();
- return -ENOIOCTLCMD;
- }
- func_exit();
- return 0;
-}
-
-
-static void sx_throttle(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_throttle")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
-
- /* Use DTR instead of RTS ! */
- if (sx_crtscts(tty))
- port->MSVR &= ~MSVR_DTR;
- else {
- /* Auch!!! I think the system shouldn't call this then. */
- /* Or maybe we're supposed (allowed?) to do our side of hw
- handshake anyway, even when hardware handshake is off.
- When you see this in your logs, please report.... */
- printk(KERN_ERR
- "sx%d: Need to throttle, but can't (hardware hs is off)\n",
- port_No(port));
- }
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CAR, port_No(port));
- spin_unlock_irqrestore(&bp->lock, flags);
- if (I_IXOFF(tty)) {
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_SSCH2);
- spin_unlock_irqrestore(&bp->lock, flags);
- sx_wait_CCR(bp);
- }
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock_irqrestore(&bp->lock, flags);
-
- func_exit();
-}
-
-
-static void sx_unthrottle(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_unthrottle")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&port->lock, flags);
- /* XXXX Use DTR INSTEAD???? */
- if (sx_crtscts(tty))
- port->MSVR |= MSVR_DTR;
- /* Else clause: see remark in "sx_throttle"... */
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_CAR, port_No(port));
- spin_unlock(&bp->lock);
- if (I_IXOFF(tty)) {
- spin_unlock_irqrestore(&port->lock, flags);
- sx_wait_CCR(bp);
- spin_lock_irqsave(&bp->lock, flags);
- sx_out(bp, CD186x_CCR, CCR_SSCH1);
- spin_unlock_irqrestore(&bp->lock, flags);
- sx_wait_CCR(bp);
- spin_lock_irqsave(&port->lock, flags);
- }
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_MSVR, port->MSVR);
- spin_unlock(&bp->lock);
- spin_unlock_irqrestore(&port->lock, flags);
-
- func_exit();
-}
-
-
-static void sx_stop(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_stop")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&port->lock, flags);
- port->IER &= ~IER_TXRDY;
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_IER, port->IER);
- spin_unlock(&bp->lock);
- spin_unlock_irqrestore(&port->lock, flags);
-
- func_exit();
-}
-
-
-static void sx_start(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_start")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
-
- spin_lock_irqsave(&port->lock, flags);
- if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
- port->IER |= IER_TXRDY;
- spin_lock(&bp->lock);
- sx_out(bp, CD186x_CAR, port_No(port));
- sx_out(bp, CD186x_IER, port->IER);
- spin_unlock(&bp->lock);
- }
- spin_unlock_irqrestore(&port->lock, flags);
-
- func_exit();
-}
-
-static void sx_hangup(struct tty_struct *tty)
-{
- struct specialix_port *port = tty->driver_data;
- struct specialix_board *bp;
- unsigned long flags;
-
- func_enter();
-
- if (sx_paranoia_check(port, tty->name, "sx_hangup")) {
- func_exit();
- return;
- }
-
- bp = port_Board(port);
-
- sx_shutdown_port(bp, port);
- spin_lock_irqsave(&port->lock, flags);
- bp->count -= port->port.count;
- if (bp->count < 0) {
- printk(KERN_ERR
- "sx%d: sx_hangup: bad board count: %d port: %d\n",
- board_No(bp), bp->count, tty->index);
- bp->count = 0;
- }
- port->port.count = 0;
- port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- port->port.tty = NULL;
- spin_unlock_irqrestore(&port->lock, flags);
- wake_up_interruptible(&port->port.open_wait);
-
- func_exit();
-}
-
-
-static void sx_set_termios(struct tty_struct *tty,
- struct ktermios *old_termios)
-{
- struct specialix_port *port = tty->driver_data;
- unsigned long flags;
- struct specialix_board *bp;
-
- if (sx_paranoia_check(port, tty->name, "sx_set_termios"))
- return;
-
- bp = port_Board(port);
- spin_lock_irqsave(&port->lock, flags);
- sx_change_speed(port_Board(port), port);
- spin_unlock_irqrestore(&port->lock, flags);
-
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
- tty->hw_stopped = 0;
- sx_start(tty);
- }
-}
-
-static const struct tty_operations sx_ops = {
- .open = sx_open,
- .close = sx_close,
- .write = sx_write,
- .put_char = sx_put_char,
- .flush_chars = sx_flush_chars,
- .write_room = sx_write_room,
- .chars_in_buffer = sx_chars_in_buffer,
- .flush_buffer = sx_flush_buffer,
- .ioctl = sx_ioctl,
- .throttle = sx_throttle,
- .unthrottle = sx_unthrottle,
- .set_termios = sx_set_termios,
- .stop = sx_stop,
- .start = sx_start,
- .hangup = sx_hangup,
- .tiocmget = sx_tiocmget,
- .tiocmset = sx_tiocmset,
- .break_ctl = sx_send_break,
-};
-
-static int sx_init_drivers(void)
-{
- int error;
- int i;
-
- func_enter();
-
- specialix_driver = alloc_tty_driver(SX_NBOARD * SX_NPORT);
- if (!specialix_driver) {
- printk(KERN_ERR "sx: Couldn't allocate tty_driver.\n");
- func_exit();
- return 1;
- }
-
- specialix_driver->owner = THIS_MODULE;
- specialix_driver->name = "ttyW";
- specialix_driver->major = SPECIALIX_NORMAL_MAJOR;
- specialix_driver->type = TTY_DRIVER_TYPE_SERIAL;
- specialix_driver->subtype = SERIAL_TYPE_NORMAL;
- specialix_driver->init_termios = tty_std_termios;
- specialix_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- specialix_driver->init_termios.c_ispeed = 9600;
- specialix_driver->init_termios.c_ospeed = 9600;
- specialix_driver->flags = TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_HARDWARE_BREAK;
- tty_set_operations(specialix_driver, &sx_ops);
-
- error = tty_register_driver(specialix_driver);
- if (error) {
- put_tty_driver(specialix_driver);
- printk(KERN_ERR
- "sx: Couldn't register specialix IO8+ driver, error = %d\n",
- error);
- func_exit();
- return 1;
- }
- memset(sx_port, 0, sizeof(sx_port));
- for (i = 0; i < SX_NPORT * SX_NBOARD; i++) {
- sx_port[i].magic = SPECIALIX_MAGIC;
- tty_port_init(&sx_port[i].port);
- spin_lock_init(&sx_port[i].lock);
- }
-
- func_exit();
- return 0;
-}
-
-static void sx_release_drivers(void)
-{
- func_enter();
-
- tty_unregister_driver(specialix_driver);
- put_tty_driver(specialix_driver);
- func_exit();
-}
-
-/*
- * This routine must be called by kernel at boot time
- */
-static int __init specialix_init(void)
-{
- int i;
- int found = 0;
-
- func_enter();
-
- printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
- printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
- if (sx_rtscts)
- printk(KERN_INFO
- "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
- else
- printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-
- for (i = 0; i < SX_NBOARD; i++)
- spin_lock_init(&sx_board[i].lock);
-
- if (sx_init_drivers()) {
- func_exit();
- return -EIO;
- }
-
- for (i = 0; i < SX_NBOARD; i++)
- if (sx_board[i].base && !sx_probe(&sx_board[i]))
- found++;
-
-#ifdef CONFIG_PCI
- {
- struct pci_dev *pdev = NULL;
-
- i = 0;
- while (i < SX_NBOARD) {
- if (sx_board[i].flags & SX_BOARD_PRESENT) {
- i++;
- continue;
- }
- pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX,
- PCI_DEVICE_ID_SPECIALIX_IO8, pdev);
- if (!pdev)
- break;
-
- if (pci_enable_device(pdev))
- continue;
-
- sx_board[i].irq = pdev->irq;
-
- sx_board[i].base = pci_resource_start(pdev, 2);
-
- sx_board[i].flags |= SX_BOARD_IS_PCI;
- if (!sx_probe(&sx_board[i]))
- found++;
- }
- /* May exit pci_get sequence early with lots of boards */
- if (pdev != NULL)
- pci_dev_put(pdev);
- }
-#endif
-
- if (!found) {
- sx_release_drivers();
- printk(KERN_INFO "sx: No specialix IO8+ boards detected.\n");
- func_exit();
- return -EIO;
- }
-
- func_exit();
- return 0;
-}
-
-static int iobase[SX_NBOARD] = {0,};
-static int irq[SX_NBOARD] = {0,};
-
-module_param_array(iobase, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param(sx_debug, int, 0);
-module_param(sx_rtscts, int, 0);
-module_param(sx_rxfifo, int, 0);
-
-/*
- * You can setup up to 4 boards.
- * by specifying "iobase=0xXXX,0xXXX ..." as insmod parameter.
- * You should specify the IRQs too in that case "irq=....,...".
- *
- * More than 4 boards in one computer is not possible, as the card can
- * only use 4 different interrupts.
- *
- */
-static int __init specialix_init_module(void)
-{
- int i;
-
- func_enter();
-
- if (iobase[0] || iobase[1] || iobase[2] || iobase[3]) {
- for (i = 0; i < SX_NBOARD; i++) {
- sx_board[i].base = iobase[i];
- sx_board[i].irq = irq[i];
- sx_board[i].count = 0;
- }
- }
-
- func_exit();
-
- return specialix_init();
-}
-
-static void __exit specialix_exit_module(void)
-{
- int i;
-
- func_enter();
-
- sx_release_drivers();
- for (i = 0; i < SX_NBOARD; i++)
- if (sx_board[i].flags & SX_BOARD_PRESENT)
- sx_release_io_range(&sx_board[i]);
- func_exit();
-}
-
-static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
- { PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
- { }
-};
-MODULE_DEVICE_TABLE(pci, specialx_pci_tbl);
-
-module_init(specialix_init_module);
-module_exit(specialix_exit_module);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(SPECIALIX_NORMAL_MAJOR);
diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h
deleted file mode 100644
index c630052..0000000
--- a/drivers/char/specialix_io8.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * linux/drivers/char/specialix_io8.h --
- * Specialix IO8+ multiport serial driver.
- *
- * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
- * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
- *
- *
- * Specialix pays for the development and support of this driver.
- * Please DO contact io8-linux@specialix.co.uk if you require
- * support.
- *
- * This driver was developped in the BitWizard linux device
- * driver service. If you require a linux device driver for your
- * product, please contact devices@BitWizard.nl for a quote.
- *
- * This code is firmly based on the riscom/8 serial driver,
- * written by Dmitry Gorodchanin. The specialix IO8+ card
- * programming information was obtained from the CL-CD1865 Data
- * Book, and Specialix document number 6200059: IO8+ Hardware
- * Functional Specification.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- * USA.
- * */
-
-#ifndef __LINUX_SPECIALIX_H
-#define __LINUX_SPECIALIX_H
-
-#include <linux/serial.h>
-
-#ifdef __KERNEL__
-
-/* You can have max 4 ISA cards in one PC, and I recommend not much
-more than a few PCI versions of the card. */
-
-#define SX_NBOARD 8
-
-/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */
-#define SX_IO_SPACE 4
-/* The PCI version decodes 8 addresses, but still only 2 are used. */
-#define SX_PCI_IO_SPACE 8
-
-/* eight ports per board. */
-#define SX_NPORT 8
-#define SX_BOARD(line) ((line) / SX_NPORT)
-#define SX_PORT(line) ((line) & (SX_NPORT - 1))
-
-
-#define SX_DATA_REG 0 /* Base+0 : Data register */
-#define SX_ADDR_REG 1 /* base+1 : Address register. */
-
-#define MHz *1000000 /* I'm ashamed of myself. */
-
-/* On-board oscillator frequency */
-#define SX_OSCFREQ (25 MHz/2)
-/* There is a 25MHz crystal on the board, but the chip is in /2 mode */
-
-
-/* Ticks per sec. Used for setting receiver timeout and break length */
-#define SPECIALIX_TPS 4000
-
-/* Yeah, after heavy testing I decided it must be 6.
- * Sure, You can change it if needed.
- */
-#define SPECIALIX_RXFIFO 6 /* Max. receiver FIFO size (1-8) */
-
-#define SPECIALIX_MAGIC 0x0907
-
-#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait upto
- 10 milliseconds before the internal
- processor is available again after
- you give it a command */
-
-#define SX_IOBASE1 0x100
-#define SX_IOBASE2 0x180
-#define SX_IOBASE3 0x250
-#define SX_IOBASE4 0x260
-
-struct specialix_board {
- unsigned long flags;
- unsigned short base;
- unsigned char irq;
- //signed char count;
- int count;
- unsigned char DTR;
- int reg;
- spinlock_t lock;
-};
-
-#define SX_BOARD_PRESENT 0x00000001
-#define SX_BOARD_ACTIVE 0x00000002
-#define SX_BOARD_IS_PCI 0x00000004
-
-
-struct specialix_port {
- int magic;
- struct tty_port port;
- int baud_base;
- int flags;
- int timeout;
- unsigned char * xmit_buf;
- int custom_divisor;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- short wakeup_chars;
- short break_length;
- unsigned char mark_mask;
- unsigned char IER;
- unsigned char MSVR;
- unsigned char COR2;
- unsigned long overrun;
- unsigned long hits[10];
- spinlock_t lock;
-};
-
-#endif /* __KERNEL__ */
-#endif /* __LINUX_SPECIALIX_H */
-
-
-
-
-
-
-
-
-
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
deleted file mode 100644
index 4fff5cd..0000000
--- a/drivers/char/stallion.c
+++ /dev/null
@@ -1,4651 +0,0 @@
-/*****************************************************************************/
-
-/*
- * stallion.c -- stallion multiport serial driver.
- *
- * Copyright (C) 1996-1999 Stallion Technologies
- * Copyright (C) 1994-1996 Greg Ungerer.
- *
- * This code is loosely based on the Linux serial driver, written by
- * Linus Torvalds, Theodore T'so and others.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*****************************************************************************/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/seq_file.h>
-#include <linux/cd1400.h>
-#include <linux/sc26198.h>
-#include <linux/comstats.h>
-#include <linux/stallion.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/ctype.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/pci.h>
-
-/*****************************************************************************/
-
-/*
- * Define different board types. Use the standard Stallion "assigned"
- * board numbers. Boards supported in this driver are abbreviated as
- * EIO = EasyIO and ECH = EasyConnection 8/32.
- */
-#define BRD_EASYIO 20
-#define BRD_ECH 21
-#define BRD_ECHMC 22
-#define BRD_ECHPCI 26
-#define BRD_ECH64PCI 27
-#define BRD_EASYIOPCI 28
-
-struct stlconf {
- unsigned int brdtype;
- int ioaddr1;
- int ioaddr2;
- unsigned long memaddr;
- int irq;
- int irqtype;
-};
-
-static unsigned int stl_nrbrds;
-
-/*****************************************************************************/
-
-/*
- * Define some important driver characteristics. Device major numbers
- * allocated as per Linux Device Registry.
- */
-#ifndef STL_SIOMEMMAJOR
-#define STL_SIOMEMMAJOR 28
-#endif
-#ifndef STL_SERIALMAJOR
-#define STL_SERIALMAJOR 24
-#endif
-#ifndef STL_CALLOUTMAJOR
-#define STL_CALLOUTMAJOR 25
-#endif
-
-/*
- * Set the TX buffer size. Bigger is better, but we don't want
- * to chew too much memory with buffers!
- */
-#define STL_TXBUFLOW 512
-#define STL_TXBUFSIZE 4096
-
-/*****************************************************************************/
-
-/*
- * Define our local driver identity first. Set up stuff to deal with
- * all the local structures required by a serial tty driver.
- */
-static char *stl_drvtitle = "Stallion Multiport Serial Driver";
-static char *stl_drvname = "stallion";
-static char *stl_drvversion = "5.6.0";
-
-static struct tty_driver *stl_serial;
-
-/*
- * Define a local default termios struct. All ports will be created
- * with this termios initially. Basically all it defines is a raw port
- * at 9600, 8 data bits, 1 stop bit.
- */
-static struct ktermios stl_deftermios = {
- .c_cflag = (B9600 | CS8 | CREAD | HUPCL | CLOCAL),
- .c_cc = INIT_C_CC,
- .c_ispeed = 9600,
- .c_ospeed = 9600,
-};
-
-/*
- * Define global place to put buffer overflow characters.
- */
-static char stl_unwanted[SC26198_RXFIFOSIZE];
-
-/*****************************************************************************/
-
-static DEFINE_MUTEX(stl_brdslock);
-static struct stlbrd *stl_brds[STL_MAXBRDS];
-
-static const struct tty_port_operations stl_port_ops;
-
-/*
- * Per board state flags. Used with the state field of the board struct.
- * Not really much here!
- */
-#define BRD_FOUND 0x1
-#define STL_PROBED 0x2
-
-
-/*
- * Define the port structure istate flags. These set of flags are
- * modified at interrupt time - so setting and reseting them needs
- * to be atomic. Use the bit clear/setting routines for this.
- */
-#define ASYI_TXBUSY 1
-#define ASYI_TXLOW 2
-#define ASYI_TXFLOWED 3
-
-/*
- * Define an array of board names as printable strings. Handy for
- * referencing boards when printing trace and stuff.
- */
-static char *stl_brdnames[] = {
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- NULL,
- "EasyIO",
- "EC8/32-AT",
- "EC8/32-MC",
- NULL,
- NULL,
- NULL,
- "EC8/32-PCI",
- "EC8/64-PCI",
- "EasyIO-PCI",
-};
-
-/*****************************************************************************/
-
-/*
- * Define some string labels for arguments passed from the module
- * load line. These allow for easy board definitions, and easy
- * modification of the io, memory and irq resoucres.
- */
-static unsigned int stl_nargs;
-static char *board0[4];
-static char *board1[4];
-static char *board2[4];
-static char *board3[4];
-
-static char **stl_brdsp[] = {
- (char **) &board0,
- (char **) &board1,
- (char **) &board2,
- (char **) &board3
-};
-
-/*
- * Define a set of common board names, and types. This is used to
- * parse any module arguments.
- */
-
-static struct {
- char *name;
- int type;
-} stl_brdstr[] = {
- { "easyio", BRD_EASYIO },
- { "eio", BRD_EASYIO },
- { "20", BRD_EASYIO },
- { "ec8/32", BRD_ECH },
- { "ec8/32-at", BRD_ECH },
- { "ec8/32-isa", BRD_ECH },
- { "ech", BRD_ECH },
- { "echat", BRD_ECH },
- { "21", BRD_ECH },
- { "ec8/32-mc", BRD_ECHMC },
- { "ec8/32-mca", BRD_ECHMC },
- { "echmc", BRD_ECHMC },
- { "echmca", BRD_ECHMC },
- { "22", BRD_ECHMC },
- { "ec8/32-pc", BRD_ECHPCI },
- { "ec8/32-pci", BRD_ECHPCI },
- { "26", BRD_ECHPCI },
- { "ec8/64-pc", BRD_ECH64PCI },
- { "ec8/64-pci", BRD_ECH64PCI },
- { "ech-pci", BRD_ECH64PCI },
- { "echpci", BRD_ECH64PCI },
- { "echpc", BRD_ECH64PCI },
- { "27", BRD_ECH64PCI },
- { "easyio-pc", BRD_EASYIOPCI },
- { "easyio-pci", BRD_EASYIOPCI },
- { "eio-pci", BRD_EASYIOPCI },
- { "eiopci", BRD_EASYIOPCI },
- { "28", BRD_EASYIOPCI },
-};
-
-/*
- * Define the module agruments.
- */
-
-module_param_array(board0, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board1, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board2, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,ioaddr2][,irq]]");
-module_param_array(board3, charp, &stl_nargs, 0);
-MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,ioaddr2][,irq]]");
-
-/*****************************************************************************/
-
-/*
- * Hardware ID bits for the EasyIO and ECH boards. These defines apply
- * to the directly accessible io ports of these boards (not the uarts -
- * they are in cd1400.h and sc26198.h).
- */
-#define EIO_8PORTRS 0x04
-#define EIO_4PORTRS 0x05
-#define EIO_8PORTDI 0x00
-#define EIO_8PORTM 0x06
-#define EIO_MK3 0x03
-#define EIO_IDBITMASK 0x07
-
-#define EIO_BRDMASK 0xf0
-#define ID_BRD4 0x10
-#define ID_BRD8 0x20
-#define ID_BRD16 0x30
-
-#define EIO_INTRPEND 0x08
-#define EIO_INTEDGE 0x00
-#define EIO_INTLEVEL 0x08
-#define EIO_0WS 0x10
-
-#define ECH_ID 0xa0
-#define ECH_IDBITMASK 0xe0
-#define ECH_BRDENABLE 0x08
-#define ECH_BRDDISABLE 0x00
-#define ECH_INTENABLE 0x01
-#define ECH_INTDISABLE 0x00
-#define ECH_INTLEVEL 0x02
-#define ECH_INTEDGE 0x00
-#define ECH_INTRPEND 0x01
-#define ECH_BRDRESET 0x01
-
-#define ECHMC_INTENABLE 0x01
-#define ECHMC_BRDRESET 0x02
-
-#define ECH_PNLSTATUS 2
-#define ECH_PNL16PORT 0x20
-#define ECH_PNLIDMASK 0x07
-#define ECH_PNLXPID 0x40
-#define ECH_PNLINTRPEND 0x80
-
-#define ECH_ADDR2MASK 0x1e0
-
-/*
- * Define the vector mapping bits for the programmable interrupt board
- * hardware. These bits encode the interrupt for the board to use - it
- * is software selectable (except the EIO-8M).
- */
-static unsigned char stl_vecmap[] = {
- 0xff, 0xff, 0xff, 0x04, 0x06, 0x05, 0xff, 0x07,
- 0xff, 0xff, 0x00, 0x02, 0x01, 0xff, 0xff, 0x03
-};
-
-/*
- * Lock ordering is that you may not take stallion_lock holding
- * brd_lock.
- */
-
-static spinlock_t brd_lock; /* Guard the board mapping */
-static spinlock_t stallion_lock; /* Guard the tty driver */
-
-/*
- * Set up enable and disable macros for the ECH boards. They require
- * the secondary io address space to be activated and deactivated.
- * This way all ECH boards can share their secondary io region.
- * If this is an ECH-PCI board then also need to set the page pointer
- * to point to the correct page.
- */
-#define BRDENABLE(brdnr,pagenr) \
- if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
- outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDENABLE), \
- stl_brds[(brdnr)]->ioctrl); \
- else if (stl_brds[(brdnr)]->brdtype == BRD_ECHPCI) \
- outb((pagenr), stl_brds[(brdnr)]->ioctrl);
-
-#define BRDDISABLE(brdnr) \
- if (stl_brds[(brdnr)]->brdtype == BRD_ECH) \
- outb((stl_brds[(brdnr)]->ioctrlval | ECH_BRDDISABLE), \
- stl_brds[(brdnr)]->ioctrl);
-
-#define STL_CD1400MAXBAUD 230400
-#define STL_SC26198MAXBAUD 460800
-
-#define STL_BAUDBASE 115200
-#define STL_CLOSEDELAY (5 * HZ / 10)
-
-/*****************************************************************************/
-
-/*
- * Define the Stallion PCI vendor and device IDs.
- */
-#ifndef PCI_VENDOR_ID_STALLION
-#define PCI_VENDOR_ID_STALLION 0x124d
-#endif
-#ifndef PCI_DEVICE_ID_ECHPCI832
-#define PCI_DEVICE_ID_ECHPCI832 0x0000
-#endif
-#ifndef PCI_DEVICE_ID_ECHPCI864
-#define PCI_DEVICE_ID_ECHPCI864 0x0002
-#endif
-#ifndef PCI_DEVICE_ID_EIOPCI
-#define PCI_DEVICE_ID_EIOPCI 0x0003
-#endif
-
-/*
- * Define structure to hold all Stallion PCI boards.
- */
-
-static struct pci_device_id stl_pcibrds[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI864),
- .driver_data = BRD_ECH64PCI },
- { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_EIOPCI),
- .driver_data = BRD_EASYIOPCI },
- { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECHPCI832),
- .driver_data = BRD_ECHPCI },
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87410),
- .driver_data = BRD_ECHPCI },
- { }
-};
-MODULE_DEVICE_TABLE(pci, stl_pcibrds);
-
-/*****************************************************************************/
-
-/*
- * Define macros to extract a brd/port number from a minor number.
- */
-#define MINOR2BRD(min) (((min) & 0xc0) >> 6)
-#define MINOR2PORT(min) ((min) & 0x3f)
-
-/*
- * Define a baud rate table that converts termios baud rate selector
- * into the actual baud rate value. All baud rate calculations are
- * based on the actual baud rate required.
- */
-static unsigned int stl_baudrates[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600
-};
-
-/*****************************************************************************/
-
-/*
- * Declare all those functions in this driver!
- */
-
-static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg);
-static int stl_brdinit(struct stlbrd *brdp);
-static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp);
-static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
-
-/*
- * CD1400 uart specific handling functions.
- */
-static void stl_cd1400setreg(struct stlport *portp, int regnr, int value);
-static int stl_cd1400getreg(struct stlport *portp, int regnr);
-static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value);
-static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
-static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp);
-static int stl_cd1400getsignals(struct stlport *portp);
-static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts);
-static void stl_cd1400ccrwait(struct stlport *portp);
-static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx);
-static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx);
-static void stl_cd1400disableintrs(struct stlport *portp);
-static void stl_cd1400sendbreak(struct stlport *portp, int len);
-static void stl_cd1400flowctrl(struct stlport *portp, int state);
-static void stl_cd1400sendflow(struct stlport *portp, int state);
-static void stl_cd1400flush(struct stlport *portp);
-static int stl_cd1400datastate(struct stlport *portp);
-static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase);
-static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase);
-static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr);
-static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr);
-static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr);
-
-static inline int stl_cd1400breakisr(struct stlport *portp, int ioaddr);
-
-/*
- * SC26198 uart specific handling functions.
- */
-static void stl_sc26198setreg(struct stlport *portp, int regnr, int value);
-static int stl_sc26198getreg(struct stlport *portp, int regnr);
-static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value);
-static int stl_sc26198getglobreg(struct stlport *portp, int regnr);
-static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp);
-static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
-static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp);
-static int stl_sc26198getsignals(struct stlport *portp);
-static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts);
-static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx);
-static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx);
-static void stl_sc26198disableintrs(struct stlport *portp);
-static void stl_sc26198sendbreak(struct stlport *portp, int len);
-static void stl_sc26198flowctrl(struct stlport *portp, int state);
-static void stl_sc26198sendflow(struct stlport *portp, int state);
-static void stl_sc26198flush(struct stlport *portp);
-static int stl_sc26198datastate(struct stlport *portp);
-static void stl_sc26198wait(struct stlport *portp);
-static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty);
-static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase);
-static void stl_sc26198txisr(struct stlport *port);
-static void stl_sc26198rxisr(struct stlport *port, unsigned int iack);
-static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch);
-static void stl_sc26198rxbadchars(struct stlport *portp);
-static void stl_sc26198otherisr(struct stlport *port, unsigned int iack);
-
-/*****************************************************************************/
-
-/*
- * Generic UART support structure.
- */
-typedef struct uart {
- int (*panelinit)(struct stlbrd *brdp, struct stlpanel *panelp);
- void (*portinit)(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp);
- void (*setport)(struct stlport *portp, struct ktermios *tiosp);
- int (*getsignals)(struct stlport *portp);
- void (*setsignals)(struct stlport *portp, int dtr, int rts);
- void (*enablerxtx)(struct stlport *portp, int rx, int tx);
- void (*startrxtx)(struct stlport *portp, int rx, int tx);
- void (*disableintrs)(struct stlport *portp);
- void (*sendbreak)(struct stlport *portp, int len);
- void (*flowctrl)(struct stlport *portp, int state);
- void (*sendflow)(struct stlport *portp, int state);
- void (*flush)(struct stlport *portp);
- int (*datastate)(struct stlport *portp);
- void (*intr)(struct stlpanel *panelp, unsigned int iobase);
-} uart_t;
-
-/*
- * Define some macros to make calling these functions nice and clean.
- */
-#define stl_panelinit (* ((uart_t *) panelp->uartp)->panelinit)
-#define stl_portinit (* ((uart_t *) portp->uartp)->portinit)
-#define stl_setport (* ((uart_t *) portp->uartp)->setport)
-#define stl_getsignals (* ((uart_t *) portp->uartp)->getsignals)
-#define stl_setsignals (* ((uart_t *) portp->uartp)->setsignals)
-#define stl_enablerxtx (* ((uart_t *) portp->uartp)->enablerxtx)
-#define stl_startrxtx (* ((uart_t *) portp->uartp)->startrxtx)
-#define stl_disableintrs (* ((uart_t *) portp->uartp)->disableintrs)
-#define stl_sendbreak (* ((uart_t *) portp->uartp)->sendbreak)
-#define stl_flowctrl (* ((uart_t *) portp->uartp)->flowctrl)
-#define stl_sendflow (* ((uart_t *) portp->uartp)->sendflow)
-#define stl_flush (* ((uart_t *) portp->uartp)->flush)
-#define stl_datastate (* ((uart_t *) portp->uartp)->datastate)
-
-/*****************************************************************************/
-
-/*
- * CD1400 UART specific data initialization.
- */
-static uart_t stl_cd1400uart = {
- stl_cd1400panelinit,
- stl_cd1400portinit,
- stl_cd1400setport,
- stl_cd1400getsignals,
- stl_cd1400setsignals,
- stl_cd1400enablerxtx,
- stl_cd1400startrxtx,
- stl_cd1400disableintrs,
- stl_cd1400sendbreak,
- stl_cd1400flowctrl,
- stl_cd1400sendflow,
- stl_cd1400flush,
- stl_cd1400datastate,
- stl_cd1400eiointr
-};
-
-/*
- * Define the offsets within the register bank of a cd1400 based panel.
- * These io address offsets are common to the EasyIO board as well.
- */
-#define EREG_ADDR 0
-#define EREG_DATA 4
-#define EREG_RXACK 5
-#define EREG_TXACK 6
-#define EREG_MDACK 7
-
-#define EREG_BANKSIZE 8
-
-#define CD1400_CLK 25000000
-#define CD1400_CLK8M 20000000
-
-/*
- * Define the cd1400 baud rate clocks. These are used when calculating
- * what clock and divisor to use for the required baud rate. Also
- * define the maximum baud rate allowed, and the default base baud.
- */
-static int stl_cd1400clkdivs[] = {
- CD1400_CLK0, CD1400_CLK1, CD1400_CLK2, CD1400_CLK3, CD1400_CLK4
-};
-
-/*****************************************************************************/
-
-/*
- * SC26198 UART specific data initization.
- */
-static uart_t stl_sc26198uart = {
- stl_sc26198panelinit,
- stl_sc26198portinit,
- stl_sc26198setport,
- stl_sc26198getsignals,
- stl_sc26198setsignals,
- stl_sc26198enablerxtx,
- stl_sc26198startrxtx,
- stl_sc26198disableintrs,
- stl_sc26198sendbreak,
- stl_sc26198flowctrl,
- stl_sc26198sendflow,
- stl_sc26198flush,
- stl_sc26198datastate,
- stl_sc26198intr
-};
-
-/*
- * Define the offsets within the register bank of a sc26198 based panel.
- */
-#define XP_DATA 0
-#define XP_ADDR 1
-#define XP_MODID 2
-#define XP_STATUS 2
-#define XP_IACK 3
-
-#define XP_BANKSIZE 4
-
-/*
- * Define the sc26198 baud rate table. Offsets within the table
- * represent the actual baud rate selector of sc26198 registers.
- */
-static unsigned int sc26198_baudtable[] = {
- 50, 75, 150, 200, 300, 450, 600, 900, 1200, 1800, 2400, 3600,
- 4800, 7200, 9600, 14400, 19200, 28800, 38400, 57600, 115200,
- 230400, 460800, 921600
-};
-
-#define SC26198_NRBAUDS ARRAY_SIZE(sc26198_baudtable)
-
-/*****************************************************************************/
-
-/*
- * Define the driver info for a user level control device. Used mainly
- * to get at port stats - only not using the port device itself.
- */
-static const struct file_operations stl_fsiomem = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = stl_memioctl,
- .llseek = noop_llseek,
-};
-
-static struct class *stallion_class;
-
-static void stl_cd_change(struct stlport *portp)
-{
- unsigned int oldsigs = portp->sigs;
- struct tty_struct *tty = tty_port_tty_get(&portp->port);
-
- if (!tty)
- return;
-
- portp->sigs = stl_getsignals(portp);
-
- if ((portp->sigs & TIOCM_CD) && ((oldsigs & TIOCM_CD) == 0))
- wake_up_interruptible(&portp->port.open_wait);
-
- if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
- if (portp->port.flags & ASYNC_CHECK_CD)
- tty_hangup(tty);
- tty_kref_put(tty);
-}
-
-/*
- * Check for any arguments passed in on the module load command line.
- */
-
-/*****************************************************************************/
-
-/*
- * Parse the supplied argument string, into the board conf struct.
- */
-
-static int __init stl_parsebrd(struct stlconf *confp, char **argp)
-{
- char *sp;
- unsigned int i;
-
- pr_debug("stl_parsebrd(confp=%p,argp=%p)\n", confp, argp);
-
- if ((argp[0] == NULL) || (*argp[0] == 0))
- return 0;
-
- for (sp = argp[0], i = 0; (*sp != 0) && (i < 25); sp++, i++)
- *sp = tolower(*sp);
-
- for (i = 0; i < ARRAY_SIZE(stl_brdstr); i++)
- if (strcmp(stl_brdstr[i].name, argp[0]) == 0)
- break;
-
- if (i == ARRAY_SIZE(stl_brdstr)) {
- printk("STALLION: unknown board name, %s?\n", argp[0]);
- return 0;
- }
-
- confp->brdtype = stl_brdstr[i].type;
-
- i = 1;
- if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->ioaddr1 = simple_strtoul(argp[i], NULL, 0);
- i++;
- if (confp->brdtype == BRD_ECH) {
- if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->ioaddr2 = simple_strtoul(argp[i], NULL, 0);
- i++;
- }
- if ((argp[i] != NULL) && (*argp[i] != 0))
- confp->irq = simple_strtoul(argp[i], NULL, 0);
- return 1;
-}
-
-/*****************************************************************************/
-
-/*
- * Allocate a new board structure. Fill out the basic info in it.
- */
-
-static struct stlbrd *stl_allocbrd(void)
-{
- struct stlbrd *brdp;
-
- brdp = kzalloc(sizeof(struct stlbrd), GFP_KERNEL);
- if (!brdp) {
- printk("STALLION: failed to allocate memory (size=%Zd)\n",
- sizeof(struct stlbrd));
- return NULL;
- }
-
- brdp->magic = STL_BOARDMAGIC;
- return brdp;
-}
-
-/*****************************************************************************/
-
-static int stl_activate(struct tty_port *port, struct tty_struct *tty)
-{
- struct stlport *portp = container_of(port, struct stlport, port);
- if (!portp->tx.buf) {
- portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
- if (!portp->tx.buf)
- return -ENOMEM;
- portp->tx.head = portp->tx.buf;
- portp->tx.tail = portp->tx.buf;
- }
- stl_setport(portp, tty->termios);
- portp->sigs = stl_getsignals(portp);
- stl_setsignals(portp, 1, 1);
- stl_enablerxtx(portp, 1, 1);
- stl_startrxtx(portp, 1, 0);
- return 0;
-}
-
-static int stl_open(struct tty_struct *tty, struct file *filp)
-{
- struct stlport *portp;
- struct stlbrd *brdp;
- unsigned int minordev, brdnr, panelnr;
- int portnr;
-
- pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name);
-
- minordev = tty->index;
- brdnr = MINOR2BRD(minordev);
- if (brdnr >= stl_nrbrds)
- return -ENODEV;
- brdp = stl_brds[brdnr];
- if (brdp == NULL)
- return -ENODEV;
-
- minordev = MINOR2PORT(minordev);
- for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) {
- if (brdp->panels[panelnr] == NULL)
- break;
- if (minordev < brdp->panels[panelnr]->nrports) {
- portnr = minordev;
- break;
- }
- minordev -= brdp->panels[panelnr]->nrports;
- }
- if (portnr < 0)
- return -ENODEV;
-
- portp = brdp->panels[panelnr]->ports[portnr];
- if (portp == NULL)
- return -ENODEV;
-
- tty->driver_data = portp;
- return tty_port_open(&portp->port, tty, filp);
-
-}
-
-/*****************************************************************************/
-
-static int stl_carrier_raised(struct tty_port *port)
-{
- struct stlport *portp = container_of(port, struct stlport, port);
- return (portp->sigs & TIOCM_CD) ? 1 : 0;
-}
-
-static void stl_dtr_rts(struct tty_port *port, int on)
-{
- struct stlport *portp = container_of(port, struct stlport, port);
- /* Takes brd_lock internally */
- stl_setsignals(portp, on, on);
-}
-
-/*****************************************************************************/
-
-static void stl_flushbuffer(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_flushbuffer(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- stl_flush(portp);
- tty_wakeup(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_waituntilsent(struct tty_struct *tty, int timeout)
-{
- struct stlport *portp;
- unsigned long tend;
-
- pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- if (timeout == 0)
- timeout = HZ;
- tend = jiffies + timeout;
-
- while (stl_datastate(portp)) {
- if (signal_pending(current))
- break;
- msleep_interruptible(20);
- if (time_after_eq(jiffies, tend))
- break;
- }
-}
-
-/*****************************************************************************/
-
-static void stl_shutdown(struct tty_port *port)
-{
- struct stlport *portp = container_of(port, struct stlport, port);
- stl_disableintrs(portp);
- stl_enablerxtx(portp, 0, 0);
- stl_flush(portp);
- portp->istate = 0;
- if (portp->tx.buf != NULL) {
- kfree(portp->tx.buf);
- portp->tx.buf = NULL;
- portp->tx.head = NULL;
- portp->tx.tail = NULL;
- }
-}
-
-static void stl_close(struct tty_struct *tty, struct file *filp)
-{
- struct stlport*portp;
- pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
-
- portp = tty->driver_data;
- if(portp == NULL)
- return;
- tty_port_close(&portp->port, tty, filp);
-}
-
-/*****************************************************************************/
-
-/*
- * Write routine. Take data and stuff it in to the TX ring queue.
- * If transmit interrupts are not running then start them.
- */
-
-static int stl_write(struct tty_struct *tty, const unsigned char *buf, int count)
-{
- struct stlport *portp;
- unsigned int len, stlen;
- unsigned char *chbuf;
- char *head, *tail;
-
- pr_debug("stl_write(tty=%p,buf=%p,count=%d)\n", tty, buf, count);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->tx.buf == NULL)
- return 0;
-
-/*
- * If copying direct from user space we must cater for page faults,
- * causing us to "sleep" here for a while. To handle this copy in all
- * the data we need now, into a local buffer. Then when we got it all
- * copy it into the TX buffer.
- */
- chbuf = (unsigned char *) buf;
-
- head = portp->tx.head;
- tail = portp->tx.tail;
- if (head >= tail) {
- len = STL_TXBUFSIZE - (head - tail) - 1;
- stlen = STL_TXBUFSIZE - (head - portp->tx.buf);
- } else {
- len = tail - head - 1;
- stlen = len;
- }
-
- len = min(len, (unsigned int)count);
- count = 0;
- while (len > 0) {
- stlen = min(len, stlen);
- memcpy(head, chbuf, stlen);
- len -= stlen;
- chbuf += stlen;
- count += stlen;
- head += stlen;
- if (head >= (portp->tx.buf + STL_TXBUFSIZE)) {
- head = portp->tx.buf;
- stlen = tail - head;
- }
- }
- portp->tx.head = head;
-
- clear_bit(ASYI_TXLOW, &portp->istate);
- stl_startrxtx(portp, -1, 1);
-
- return count;
-}
-
-/*****************************************************************************/
-
-static int stl_putchar(struct tty_struct *tty, unsigned char ch)
-{
- struct stlport *portp;
- unsigned int len;
- char *head, *tail;
-
- pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -EINVAL;
- if (portp->tx.buf == NULL)
- return -EINVAL;
-
- head = portp->tx.head;
- tail = portp->tx.tail;
-
- len = (head >= tail) ? (STL_TXBUFSIZE - (head - tail)) : (tail - head);
- len--;
-
- if (len > 0) {
- *head++ = ch;
- if (head >= (portp->tx.buf + STL_TXBUFSIZE))
- head = portp->tx.buf;
- }
- portp->tx.head = head;
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * If there are any characters in the buffer then make sure that TX
- * interrupts are on and get'em out. Normally used after the putchar
- * routine has been called.
- */
-
-static void stl_flushchars(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_flushchars(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- if (portp->tx.buf == NULL)
- return;
-
- stl_startrxtx(portp, -1, 1);
-}
-
-/*****************************************************************************/
-
-static int stl_writeroom(struct tty_struct *tty)
-{
- struct stlport *portp;
- char *head, *tail;
-
- pr_debug("stl_writeroom(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->tx.buf == NULL)
- return 0;
-
- head = portp->tx.head;
- tail = portp->tx.tail;
- return (head >= tail) ? (STL_TXBUFSIZE - (head - tail) - 1) : (tail - head - 1);
-}
-
-/*****************************************************************************/
-
-/*
- * Return number of chars in the TX buffer. Normally we would just
- * calculate the number of chars in the buffer and return that, but if
- * the buffer is empty and TX interrupts are still on then we return
- * that the buffer still has 1 char in it. This way whoever called us
- * will not think that ALL chars have drained - since the UART still
- * must have some chars in it (we are busy after all).
- */
-
-static int stl_charsinbuffer(struct tty_struct *tty)
-{
- struct stlport *portp;
- unsigned int size;
- char *head, *tail;
-
- pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return 0;
- if (portp->tx.buf == NULL)
- return 0;
-
- head = portp->tx.head;
- tail = portp->tx.tail;
- size = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
- if ((size == 0) && test_bit(ASYI_TXBUSY, &portp->istate))
- size = 1;
- return size;
-}
-
-/*****************************************************************************/
-
-/*
- * Generate the serial struct info.
- */
-
-static int stl_getserial(struct stlport *portp, struct serial_struct __user *sp)
-{
- struct serial_struct sio;
- struct stlbrd *brdp;
-
- pr_debug("stl_getserial(portp=%p,sp=%p)\n", portp, sp);
-
- memset(&sio, 0, sizeof(struct serial_struct));
-
- mutex_lock(&portp->port.mutex);
- sio.line = portp->portnr;
- sio.port = portp->ioaddr;
- sio.flags = portp->port.flags;
- sio.baud_base = portp->baud_base;
- sio.close_delay = portp->close_delay;
- sio.closing_wait = portp->closing_wait;
- sio.custom_divisor = portp->custom_divisor;
- sio.hub6 = 0;
- if (portp->uartp == &stl_cd1400uart) {
- sio.type = PORT_CIRRUS;
- sio.xmit_fifo_size = CD1400_TXFIFOSIZE;
- } else {
- sio.type = PORT_UNKNOWN;
- sio.xmit_fifo_size = SC26198_TXFIFOSIZE;
- }
-
- brdp = stl_brds[portp->brdnr];
- if (brdp != NULL)
- sio.irq = brdp->irq;
- mutex_unlock(&portp->port.mutex);
-
- return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Set port according to the serial struct info.
- * At this point we do not do any auto-configure stuff, so we will
- * just quietly ignore any requests to change irq, etc.
- */
-
-static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
-{
- struct stlport * portp = tty->driver_data;
- struct serial_struct sio;
-
- pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
-
- if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
- return -EFAULT;
- mutex_lock(&portp->port.mutex);
- if (!capable(CAP_SYS_ADMIN)) {
- if ((sio.baud_base != portp->baud_base) ||
- (sio.close_delay != portp->close_delay) ||
- ((sio.flags & ~ASYNC_USR_MASK) !=
- (portp->port.flags & ~ASYNC_USR_MASK))) {
- mutex_unlock(&portp->port.mutex);
- return -EPERM;
- }
- }
-
- portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
- (sio.flags & ASYNC_USR_MASK);
- portp->baud_base = sio.baud_base;
- portp->close_delay = sio.close_delay;
- portp->closing_wait = sio.closing_wait;
- portp->custom_divisor = sio.custom_divisor;
- mutex_unlock(&portp->port.mutex);
- stl_setport(portp, tty->termios);
- return 0;
-}
-
-/*****************************************************************************/
-
-static int stl_tiocmget(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- return stl_getsignals(portp);
-}
-
-static int stl_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct stlport *portp;
- int rts = -1, dtr = -1;
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -ENODEV;
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- stl_setsignals(portp, dtr, rts);
- return 0;
-}
-
-static int stl_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
-{
- struct stlport *portp;
- int rc;
- void __user *argp = (void __user *)arg;
-
- pr_debug("stl_ioctl(tty=%p,cmd=%x,arg=%lx)\n", tty, cmd, arg);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -ENODEV;
-
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
- (cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS))
- if (tty->flags & (1 << TTY_IO_ERROR))
- return -EIO;
-
- rc = 0;
-
- switch (cmd) {
- case TIOCGSERIAL:
- rc = stl_getserial(portp, argp);
- break;
- case TIOCSSERIAL:
- rc = stl_setserial(tty, argp);
- break;
- case COM_GETPORTSTATS:
- rc = stl_getportstats(tty, portp, argp);
- break;
- case COM_CLRPORTSTATS:
- rc = stl_clrportstats(portp, argp);
- break;
- case TIOCSERCONFIG:
- case TIOCSERGWILD:
- case TIOCSERSWILD:
- case TIOCSERGETLSR:
- case TIOCSERGSTRUCT:
- case TIOCSERGETMULTI:
- case TIOCSERSETMULTI:
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- return rc;
-}
-
-/*****************************************************************************/
-
-/*
- * Start the transmitter again. Just turn TX interrupts back on.
- */
-
-static void stl_start(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_start(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- stl_startrxtx(portp, -1, 1);
-}
-
-/*****************************************************************************/
-
-static void stl_settermios(struct tty_struct *tty, struct ktermios *old)
-{
- struct stlport *portp;
- struct ktermios *tiosp;
-
- pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- tiosp = tty->termios;
- if ((tiosp->c_cflag == old->c_cflag) &&
- (tiosp->c_iflag == old->c_iflag))
- return;
-
- stl_setport(portp, tiosp);
- stl_setsignals(portp, ((tiosp->c_cflag & (CBAUD & ~CBAUDEX)) ? 1 : 0),
- -1);
- if ((old->c_cflag & CRTSCTS) && ((tiosp->c_cflag & CRTSCTS) == 0)) {
- tty->hw_stopped = 0;
- stl_start(tty);
- }
- if (((old->c_cflag & CLOCAL) == 0) && (tiosp->c_cflag & CLOCAL))
- wake_up_interruptible(&portp->port.open_wait);
-}
-
-/*****************************************************************************/
-
-/*
- * Attempt to flow control who ever is sending us data. Based on termios
- * settings use software or/and hardware flow control.
- */
-
-static void stl_throttle(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_throttle(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- stl_flowctrl(portp, 0);
-}
-
-/*****************************************************************************/
-
-/*
- * Unflow control the device sending us data...
- */
-
-static void stl_unthrottle(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_unthrottle(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- stl_flowctrl(portp, 1);
-}
-
-/*****************************************************************************/
-
-/*
- * Stop the transmitter. Basically to do this we will just turn TX
- * interrupts off.
- */
-
-static void stl_stop(struct tty_struct *tty)
-{
- struct stlport *portp;
-
- pr_debug("stl_stop(tty=%p)\n", tty);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
- stl_startrxtx(portp, -1, 0);
-}
-
-/*****************************************************************************/
-
-/*
- * Hangup this port. This is pretty much like closing the port, only
- * a little more brutal. No waiting for data to drain. Shutdown the
- * port and maybe drop signals.
- */
-
-static void stl_hangup(struct tty_struct *tty)
-{
- struct stlport *portp = tty->driver_data;
- pr_debug("stl_hangup(tty=%p)\n", tty);
-
- if (portp == NULL)
- return;
- tty_port_hangup(&portp->port);
-}
-
-/*****************************************************************************/
-
-static int stl_breakctl(struct tty_struct *tty, int state)
-{
- struct stlport *portp;
-
- pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return -EINVAL;
-
- stl_sendbreak(portp, ((state == -1) ? 1 : 2));
- return 0;
-}
-
-/*****************************************************************************/
-
-static void stl_sendxchar(struct tty_struct *tty, char ch)
-{
- struct stlport *portp;
-
- pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
-
- portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- if (ch == STOP_CHAR(tty))
- stl_sendflow(portp, 0);
- else if (ch == START_CHAR(tty))
- stl_sendflow(portp, 1);
- else
- stl_putchar(tty, ch);
-}
-
-static void stl_portinfo(struct seq_file *m, struct stlport *portp, int portnr)
-{
- int sigs;
- char sep;
-
- seq_printf(m, "%d: uart:%s tx:%d rx:%d",
- portnr, (portp->hwid == 1) ? "SC26198" : "CD1400",
- (int) portp->stats.txtotal, (int) portp->stats.rxtotal);
-
- if (portp->stats.rxframing)
- seq_printf(m, " fe:%d", (int) portp->stats.rxframing);
- if (portp->stats.rxparity)
- seq_printf(m, " pe:%d", (int) portp->stats.rxparity);
- if (portp->stats.rxbreaks)
- seq_printf(m, " brk:%d", (int) portp->stats.rxbreaks);
- if (portp->stats.rxoverrun)
- seq_printf(m, " oe:%d", (int) portp->stats.rxoverrun);
-
- sigs = stl_getsignals(portp);
- sep = ' ';
- if (sigs & TIOCM_RTS) {
- seq_printf(m, "%c%s", sep, "RTS");
- sep = '|';
- }
- if (sigs & TIOCM_CTS) {
- seq_printf(m, "%c%s", sep, "CTS");
- sep = '|';
- }
- if (sigs & TIOCM_DTR) {
- seq_printf(m, "%c%s", sep, "DTR");
- sep = '|';
- }
- if (sigs & TIOCM_CD) {
- seq_printf(m, "%c%s", sep, "DCD");
- sep = '|';
- }
- if (sigs & TIOCM_DSR) {
- seq_printf(m, "%c%s", sep, "DSR");
- sep = '|';
- }
- seq_putc(m, '\n');
-}
-
-/*****************************************************************************/
-
-/*
- * Port info, read from the /proc file system.
- */
-
-static int stl_proc_show(struct seq_file *m, void *v)
-{
- struct stlbrd *brdp;
- struct stlpanel *panelp;
- struct stlport *portp;
- unsigned int brdnr, panelnr, portnr;
- int totalport;
-
- totalport = 0;
-
- seq_printf(m, "%s: version %s\n", stl_drvtitle, stl_drvversion);
-
-/*
- * We scan through for each board, panel and port. The offset is
- * calculated on the fly, and irrelevant ports are skipped.
- */
- for (brdnr = 0; brdnr < stl_nrbrds; brdnr++) {
- brdp = stl_brds[brdnr];
- if (brdp == NULL)
- continue;
- if (brdp->state == 0)
- continue;
-
- totalport = brdnr * STL_MAXPORTS;
- for (panelnr = 0; panelnr < brdp->nrpanels; panelnr++) {
- panelp = brdp->panels[panelnr];
- if (panelp == NULL)
- continue;
-
- for (portnr = 0; portnr < panelp->nrports; portnr++,
- totalport++) {
- portp = panelp->ports[portnr];
- if (portp == NULL)
- continue;
- stl_portinfo(m, portp, totalport);
- }
- }
- }
- return 0;
-}
-
-static int stl_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, stl_proc_show, NULL);
-}
-
-static const struct file_operations stl_proc_fops = {
- .owner = THIS_MODULE,
- .open = stl_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/*****************************************************************************/
-
-/*
- * All board interrupts are vectored through here first. This code then
- * calls off to the approrpriate board interrupt handlers.
- */
-
-static irqreturn_t stl_intr(int irq, void *dev_id)
-{
- struct stlbrd *brdp = dev_id;
-
- pr_debug("stl_intr(brdp=%p,irq=%d)\n", brdp, brdp->irq);
-
- return IRQ_RETVAL((* brdp->isr)(brdp));
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for EasyIO board types.
- */
-
-static int stl_eiointr(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int iobase;
- int handled = 0;
-
- spin_lock(&brd_lock);
- panelp = brdp->panels[0];
- iobase = panelp->iobase;
- while (inb(brdp->iostatus) & EIO_INTRPEND) {
- handled = 1;
- (* panelp->isr)(panelp, iobase);
- }
- spin_unlock(&brd_lock);
- return handled;
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for ECH-AT board types.
- */
-
-static int stl_echatintr(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int ioaddr, bnknr;
- int handled = 0;
-
- outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
-
- while (inb(brdp->iostatus) & ECH_INTRPEND) {
- handled = 1;
- for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
- ioaddr = brdp->bnkstataddr[bnknr];
- if (inb(ioaddr) & ECH_PNLINTRPEND) {
- panelp = brdp->bnk2panel[bnknr];
- (* panelp->isr)(panelp, (ioaddr & 0xfffc));
- }
- }
- }
-
- outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
-
- return handled;
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for ECH-MCA board types.
- */
-
-static int stl_echmcaintr(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int ioaddr, bnknr;
- int handled = 0;
-
- while (inb(brdp->iostatus) & ECH_INTRPEND) {
- handled = 1;
- for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
- ioaddr = brdp->bnkstataddr[bnknr];
- if (inb(ioaddr) & ECH_PNLINTRPEND) {
- panelp = brdp->bnk2panel[bnknr];
- (* panelp->isr)(panelp, (ioaddr & 0xfffc));
- }
- }
- }
- return handled;
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for ECH-PCI board types.
- */
-
-static int stl_echpciintr(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int ioaddr, bnknr, recheck;
- int handled = 0;
-
- while (1) {
- recheck = 0;
- for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
- outb(brdp->bnkpageaddr[bnknr], brdp->ioctrl);
- ioaddr = brdp->bnkstataddr[bnknr];
- if (inb(ioaddr) & ECH_PNLINTRPEND) {
- panelp = brdp->bnk2panel[bnknr];
- (* panelp->isr)(panelp, (ioaddr & 0xfffc));
- recheck++;
- handled = 1;
- }
- }
- if (! recheck)
- break;
- }
- return handled;
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for ECH-8/64-PCI board types.
- */
-
-static int stl_echpci64intr(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int ioaddr, bnknr;
- int handled = 0;
-
- while (inb(brdp->ioctrl) & 0x1) {
- handled = 1;
- for (bnknr = 0; bnknr < brdp->nrbnks; bnknr++) {
- ioaddr = brdp->bnkstataddr[bnknr];
- if (inb(ioaddr) & ECH_PNLINTRPEND) {
- panelp = brdp->bnk2panel[bnknr];
- (* panelp->isr)(panelp, (ioaddr & 0xfffc));
- }
- }
- }
-
- return handled;
-}
-
-/*****************************************************************************/
-
-/*
- * Initialize all the ports on a panel.
- */
-
-static int __devinit stl_initports(struct stlbrd *brdp, struct stlpanel *panelp)
-{
- struct stlport *portp;
- unsigned int i;
- int chipmask;
-
- pr_debug("stl_initports(brdp=%p,panelp=%p)\n", brdp, panelp);
-
- chipmask = stl_panelinit(brdp, panelp);
-
-/*
- * All UART's are initialized (if found!). Now go through and setup
- * each ports data structures.
- */
- for (i = 0; i < panelp->nrports; i++) {
- portp = kzalloc(sizeof(struct stlport), GFP_KERNEL);
- if (!portp) {
- printk("STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(struct stlport));
- break;
- }
- tty_port_init(&portp->port);
- portp->port.ops = &stl_port_ops;
- portp->magic = STL_PORTMAGIC;
- portp->portnr = i;
- portp->brdnr = panelp->brdnr;
- portp->panelnr = panelp->panelnr;
- portp->uartp = panelp->uartp;
- portp->clk = brdp->clk;
- portp->baud_base = STL_BAUDBASE;
- portp->close_delay = STL_CLOSEDELAY;
- portp->closing_wait = 30 * HZ;
- init_waitqueue_head(&portp->port.open_wait);
- init_waitqueue_head(&portp->port.close_wait);
- portp->stats.brd = portp->brdnr;
- portp->stats.panel = portp->panelnr;
- portp->stats.port = portp->portnr;
- panelp->ports[i] = portp;
- stl_portinit(brdp, panelp, portp);
- }
-
- return 0;
-}
-
-static void stl_cleanup_panels(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- struct stlport *portp;
- unsigned int j, k;
- struct tty_struct *tty;
-
- for (j = 0; j < STL_MAXPANELS; j++) {
- panelp = brdp->panels[j];
- if (panelp == NULL)
- continue;
- for (k = 0; k < STL_PORTSPERPANEL; k++) {
- portp = panelp->ports[k];
- if (portp == NULL)
- continue;
- tty = tty_port_tty_get(&portp->port);
- if (tty != NULL) {
- stl_hangup(tty);
- tty_kref_put(tty);
- }
- kfree(portp->tx.buf);
- kfree(portp);
- }
- kfree(panelp);
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Try to find and initialize an EasyIO board.
- */
-
-static int __devinit stl_initeio(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int status;
- char *name;
- int retval;
-
- pr_debug("stl_initeio(brdp=%p)\n", brdp);
-
- brdp->ioctrl = brdp->ioaddr1 + 1;
- brdp->iostatus = brdp->ioaddr1 + 2;
-
- status = inb(brdp->iostatus);
- if ((status & EIO_IDBITMASK) == EIO_MK3)
- brdp->ioctrl++;
-
-/*
- * Handle board specific stuff now. The real difference is PCI
- * or not PCI.
- */
- if (brdp->brdtype == BRD_EASYIOPCI) {
- brdp->iosize1 = 0x80;
- brdp->iosize2 = 0x80;
- name = "serial(EIO-PCI)";
- outb(0x41, (brdp->ioaddr2 + 0x4c));
- } else {
- brdp->iosize1 = 8;
- name = "serial(EIO)";
- if ((brdp->irq < 0) || (brdp->irq > 15) ||
- (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
- printk("STALLION: invalid irq=%d for brd=%d\n",
- brdp->irq, brdp->brdnr);
- retval = -EINVAL;
- goto err;
- }
- outb((stl_vecmap[brdp->irq] | EIO_0WS |
- ((brdp->irqtype) ? EIO_INTLEVEL : EIO_INTEDGE)),
- brdp->ioctrl);
- }
-
- retval = -EBUSY;
- if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
- printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
- "%x conflicts with another device\n", brdp->brdnr,
- brdp->ioaddr1);
- goto err;
- }
-
- if (brdp->iosize2 > 0)
- if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
- printk(KERN_WARNING "STALLION: Warning, board %d I/O "
- "address %x conflicts with another device\n",
- brdp->brdnr, brdp->ioaddr2);
- printk(KERN_WARNING "STALLION: Warning, also "
- "releasing board %d I/O address %x \n",
- brdp->brdnr, brdp->ioaddr1);
- goto err_rel1;
- }
-
-/*
- * Everything looks OK, so let's go ahead and probe for the hardware.
- */
- brdp->clk = CD1400_CLK;
- brdp->isr = stl_eiointr;
-
- retval = -ENODEV;
- switch (status & EIO_IDBITMASK) {
- case EIO_8PORTM:
- brdp->clk = CD1400_CLK8M;
- /* fall thru */
- case EIO_8PORTRS:
- case EIO_8PORTDI:
- brdp->nrports = 8;
- break;
- case EIO_4PORTRS:
- brdp->nrports = 4;
- break;
- case EIO_MK3:
- switch (status & EIO_BRDMASK) {
- case ID_BRD4:
- brdp->nrports = 4;
- break;
- case ID_BRD8:
- brdp->nrports = 8;
- break;
- case ID_BRD16:
- brdp->nrports = 16;
- break;
- default:
- goto err_rel2;
- }
- break;
- default:
- goto err_rel2;
- }
-
-/*
- * We have verified that the board is actually present, so now we
- * can complete the setup.
- */
-
- panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
- if (!panelp) {
- printk(KERN_WARNING "STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(struct stlpanel));
- retval = -ENOMEM;
- goto err_rel2;
- }
-
- panelp->magic = STL_PANELMAGIC;
- panelp->brdnr = brdp->brdnr;
- panelp->panelnr = 0;
- panelp->nrports = brdp->nrports;
- panelp->iobase = brdp->ioaddr1;
- panelp->hwid = status;
- if ((status & EIO_IDBITMASK) == EIO_MK3) {
- panelp->uartp = &stl_sc26198uart;
- panelp->isr = stl_sc26198intr;
- } else {
- panelp->uartp = &stl_cd1400uart;
- panelp->isr = stl_cd1400eiointr;
- }
-
- brdp->panels[0] = panelp;
- brdp->nrpanels = 1;
- brdp->state |= BRD_FOUND;
- brdp->hwid = status;
- if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
- printk("STALLION: failed to register interrupt "
- "routine for %s irq=%d\n", name, brdp->irq);
- retval = -ENODEV;
- goto err_fr;
- }
-
- return 0;
-err_fr:
- stl_cleanup_panels(brdp);
-err_rel2:
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-err_rel1:
- release_region(brdp->ioaddr1, brdp->iosize1);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Try to find an ECH board and initialize it. This code is capable of
- * dealing with all types of ECH board.
- */
-
-static int __devinit stl_initech(struct stlbrd *brdp)
-{
- struct stlpanel *panelp;
- unsigned int status, nxtid, ioaddr, conflict, panelnr, banknr, i;
- int retval;
- char *name;
-
- pr_debug("stl_initech(brdp=%p)\n", brdp);
-
- status = 0;
- conflict = 0;
-
-/*
- * Set up the initial board register contents for boards. This varies a
- * bit between the different board types. So we need to handle each
- * separately. Also do a check that the supplied IRQ is good.
- */
- switch (brdp->brdtype) {
-
- case BRD_ECH:
- brdp->isr = stl_echatintr;
- brdp->ioctrl = brdp->ioaddr1 + 1;
- brdp->iostatus = brdp->ioaddr1 + 1;
- status = inb(brdp->iostatus);
- if ((status & ECH_IDBITMASK) != ECH_ID) {
- retval = -ENODEV;
- goto err;
- }
- if ((brdp->irq < 0) || (brdp->irq > 15) ||
- (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
- printk("STALLION: invalid irq=%d for brd=%d\n",
- brdp->irq, brdp->brdnr);
- retval = -EINVAL;
- goto err;
- }
- status = ((brdp->ioaddr2 & ECH_ADDR2MASK) >> 1);
- status |= (stl_vecmap[brdp->irq] << 1);
- outb((status | ECH_BRDRESET), brdp->ioaddr1);
- brdp->ioctrlval = ECH_INTENABLE |
- ((brdp->irqtype) ? ECH_INTLEVEL : ECH_INTEDGE);
- for (i = 0; i < 10; i++)
- outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
- brdp->iosize1 = 2;
- brdp->iosize2 = 32;
- name = "serial(EC8/32)";
- outb(status, brdp->ioaddr1);
- break;
-
- case BRD_ECHMC:
- brdp->isr = stl_echmcaintr;
- brdp->ioctrl = brdp->ioaddr1 + 0x20;
- brdp->iostatus = brdp->ioctrl;
- status = inb(brdp->iostatus);
- if ((status & ECH_IDBITMASK) != ECH_ID) {
- retval = -ENODEV;
- goto err;
- }
- if ((brdp->irq < 0) || (brdp->irq > 15) ||
- (stl_vecmap[brdp->irq] == (unsigned char) 0xff)) {
- printk("STALLION: invalid irq=%d for brd=%d\n",
- brdp->irq, brdp->brdnr);
- retval = -EINVAL;
- goto err;
- }
- outb(ECHMC_BRDRESET, brdp->ioctrl);
- outb(ECHMC_INTENABLE, brdp->ioctrl);
- brdp->iosize1 = 64;
- name = "serial(EC8/32-MC)";
- break;
-
- case BRD_ECHPCI:
- brdp->isr = stl_echpciintr;
- brdp->ioctrl = brdp->ioaddr1 + 2;
- brdp->iosize1 = 4;
- brdp->iosize2 = 8;
- name = "serial(EC8/32-PCI)";
- break;
-
- case BRD_ECH64PCI:
- brdp->isr = stl_echpci64intr;
- brdp->ioctrl = brdp->ioaddr2 + 0x40;
- outb(0x43, (brdp->ioaddr1 + 0x4c));
- brdp->iosize1 = 0x80;
- brdp->iosize2 = 0x80;
- name = "serial(EC8/64-PCI)";
- break;
-
- default:
- printk("STALLION: unknown board type=%d\n", brdp->brdtype);
- retval = -EINVAL;
- goto err;
- }
-
-/*
- * Check boards for possible IO address conflicts and return fail status
- * if an IO conflict found.
- */
- retval = -EBUSY;
- if (!request_region(brdp->ioaddr1, brdp->iosize1, name)) {
- printk(KERN_WARNING "STALLION: Warning, board %d I/O address "
- "%x conflicts with another device\n", brdp->brdnr,
- brdp->ioaddr1);
- goto err;
- }
-
- if (brdp->iosize2 > 0)
- if (!request_region(brdp->ioaddr2, brdp->iosize2, name)) {
- printk(KERN_WARNING "STALLION: Warning, board %d I/O "
- "address %x conflicts with another device\n",
- brdp->brdnr, brdp->ioaddr2);
- printk(KERN_WARNING "STALLION: Warning, also "
- "releasing board %d I/O address %x \n",
- brdp->brdnr, brdp->ioaddr1);
- goto err_rel1;
- }
-
-/*
- * Scan through the secondary io address space looking for panels.
- * As we find'em allocate and initialize panel structures for each.
- */
- brdp->clk = CD1400_CLK;
- brdp->hwid = status;
-
- ioaddr = brdp->ioaddr2;
- banknr = 0;
- panelnr = 0;
- nxtid = 0;
-
- for (i = 0; i < STL_MAXPANELS; i++) {
- if (brdp->brdtype == BRD_ECHPCI) {
- outb(nxtid, brdp->ioctrl);
- ioaddr = brdp->ioaddr2;
- }
- status = inb(ioaddr + ECH_PNLSTATUS);
- if ((status & ECH_PNLIDMASK) != nxtid)
- break;
- panelp = kzalloc(sizeof(struct stlpanel), GFP_KERNEL);
- if (!panelp) {
- printk("STALLION: failed to allocate memory "
- "(size=%Zd)\n", sizeof(struct stlpanel));
- retval = -ENOMEM;
- goto err_fr;
- }
- panelp->magic = STL_PANELMAGIC;
- panelp->brdnr = brdp->brdnr;
- panelp->panelnr = panelnr;
- panelp->iobase = ioaddr;
- panelp->pagenr = nxtid;
- panelp->hwid = status;
- brdp->bnk2panel[banknr] = panelp;
- brdp->bnkpageaddr[banknr] = nxtid;
- brdp->bnkstataddr[banknr++] = ioaddr + ECH_PNLSTATUS;
-
- if (status & ECH_PNLXPID) {
- panelp->uartp = &stl_sc26198uart;
- panelp->isr = stl_sc26198intr;
- if (status & ECH_PNL16PORT) {
- panelp->nrports = 16;
- brdp->bnk2panel[banknr] = panelp;
- brdp->bnkpageaddr[banknr] = nxtid;
- brdp->bnkstataddr[banknr++] = ioaddr + 4 +
- ECH_PNLSTATUS;
- } else
- panelp->nrports = 8;
- } else {
- panelp->uartp = &stl_cd1400uart;
- panelp->isr = stl_cd1400echintr;
- if (status & ECH_PNL16PORT) {
- panelp->nrports = 16;
- panelp->ackmask = 0x80;
- if (brdp->brdtype != BRD_ECHPCI)
- ioaddr += EREG_BANKSIZE;
- brdp->bnk2panel[banknr] = panelp;
- brdp->bnkpageaddr[banknr] = ++nxtid;
- brdp->bnkstataddr[banknr++] = ioaddr +
- ECH_PNLSTATUS;
- } else {
- panelp->nrports = 8;
- panelp->ackmask = 0xc0;
- }
- }
-
- nxtid++;
- ioaddr += EREG_BANKSIZE;
- brdp->nrports += panelp->nrports;
- brdp->panels[panelnr++] = panelp;
- if ((brdp->brdtype != BRD_ECHPCI) &&
- (ioaddr >= (brdp->ioaddr2 + brdp->iosize2))) {
- retval = -EINVAL;
- goto err_fr;
- }
- }
-
- brdp->nrpanels = panelnr;
- brdp->nrbnks = banknr;
- if (brdp->brdtype == BRD_ECH)
- outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
-
- brdp->state |= BRD_FOUND;
- if (request_irq(brdp->irq, stl_intr, IRQF_SHARED, name, brdp) != 0) {
- printk("STALLION: failed to register interrupt "
- "routine for %s irq=%d\n", name, brdp->irq);
- retval = -ENODEV;
- goto err_fr;
- }
-
- return 0;
-err_fr:
- stl_cleanup_panels(brdp);
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-err_rel1:
- release_region(brdp->ioaddr1, brdp->iosize1);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Initialize and configure the specified board.
- * Scan through all the boards in the configuration and see what we
- * can find. Handle EIO and the ECH boards a little differently here
- * since the initial search and setup is very different.
- */
-
-static int __devinit stl_brdinit(struct stlbrd *brdp)
-{
- int i, retval;
-
- pr_debug("stl_brdinit(brdp=%p)\n", brdp);
-
- switch (brdp->brdtype) {
- case BRD_EASYIO:
- case BRD_EASYIOPCI:
- retval = stl_initeio(brdp);
- if (retval)
- goto err;
- break;
- case BRD_ECH:
- case BRD_ECHMC:
- case BRD_ECHPCI:
- case BRD_ECH64PCI:
- retval = stl_initech(brdp);
- if (retval)
- goto err;
- break;
- default:
- printk("STALLION: board=%d is unknown board type=%d\n",
- brdp->brdnr, brdp->brdtype);
- retval = -ENODEV;
- goto err;
- }
-
- if ((brdp->state & BRD_FOUND) == 0) {
- printk("STALLION: %s board not found, board=%d io=%x irq=%d\n",
- stl_brdnames[brdp->brdtype], brdp->brdnr,
- brdp->ioaddr1, brdp->irq);
- goto err_free;
- }
-
- for (i = 0; i < STL_MAXPANELS; i++)
- if (brdp->panels[i] != NULL)
- stl_initports(brdp, brdp->panels[i]);
-
- printk("STALLION: %s found, board=%d io=%x irq=%d "
- "nrpanels=%d nrports=%d\n", stl_brdnames[brdp->brdtype],
- brdp->brdnr, brdp->ioaddr1, brdp->irq, brdp->nrpanels,
- brdp->nrports);
-
- return 0;
-err_free:
- free_irq(brdp->irq, brdp);
-
- stl_cleanup_panels(brdp);
-
- release_region(brdp->ioaddr1, brdp->iosize1);
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-err:
- return retval;
-}
-
-/*****************************************************************************/
-
-/*
- * Find the next available board number that is free.
- */
-
-static int __devinit stl_getbrdnr(void)
-{
- unsigned int i;
-
- for (i = 0; i < STL_MAXBRDS; i++)
- if (stl_brds[i] == NULL) {
- if (i >= stl_nrbrds)
- stl_nrbrds = i + 1;
- return i;
- }
-
- return -1;
-}
-
-/*****************************************************************************/
-/*
- * We have a Stallion board. Allocate a board structure and
- * initialize it. Read its IO and IRQ resources from PCI
- * configuration space.
- */
-
-static int __devinit stl_pciprobe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct stlbrd *brdp;
- unsigned int i, brdtype = ent->driver_data;
- int brdnr, retval = -ENODEV;
-
- if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- goto err;
-
- retval = pci_enable_device(pdev);
- if (retval)
- goto err;
- brdp = stl_allocbrd();
- if (brdp == NULL) {
- retval = -ENOMEM;
- goto err;
- }
- mutex_lock(&stl_brdslock);
- brdnr = stl_getbrdnr();
- if (brdnr < 0) {
- dev_err(&pdev->dev, "too many boards found, "
- "maximum supported %d\n", STL_MAXBRDS);
- mutex_unlock(&stl_brdslock);
- retval = -ENODEV;
- goto err_fr;
- }
- brdp->brdnr = (unsigned int)brdnr;
- stl_brds[brdp->brdnr] = brdp;
- mutex_unlock(&stl_brdslock);
-
- brdp->brdtype = brdtype;
- brdp->state |= STL_PROBED;
-
-/*
- * We have all resources from the board, so let's setup the actual
- * board structure now.
- */
- switch (brdtype) {
- case BRD_ECHPCI:
- brdp->ioaddr2 = pci_resource_start(pdev, 0);
- brdp->ioaddr1 = pci_resource_start(pdev, 1);
- break;
- case BRD_ECH64PCI:
- brdp->ioaddr2 = pci_resource_start(pdev, 2);
- brdp->ioaddr1 = pci_resource_start(pdev, 1);
- break;
- case BRD_EASYIOPCI:
- brdp->ioaddr1 = pci_resource_start(pdev, 2);
- brdp->ioaddr2 = pci_resource_start(pdev, 1);
- break;
- default:
- dev_err(&pdev->dev, "unknown PCI board type=%u\n", brdtype);
- break;
- }
-
- brdp->irq = pdev->irq;
- retval = stl_brdinit(brdp);
- if (retval)
- goto err_null;
-
- pci_set_drvdata(pdev, brdp);
-
- for (i = 0; i < brdp->nrports; i++)
- tty_register_device(stl_serial,
- brdp->brdnr * STL_MAXPORTS + i, &pdev->dev);
-
- return 0;
-err_null:
- stl_brds[brdp->brdnr] = NULL;
-err_fr:
- kfree(brdp);
-err:
- return retval;
-}
-
-static void __devexit stl_pciremove(struct pci_dev *pdev)
-{
- struct stlbrd *brdp = pci_get_drvdata(pdev);
- unsigned int i;
-
- free_irq(brdp->irq, brdp);
-
- stl_cleanup_panels(brdp);
-
- release_region(brdp->ioaddr1, brdp->iosize1);
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-
- for (i = 0; i < brdp->nrports; i++)
- tty_unregister_device(stl_serial,
- brdp->brdnr * STL_MAXPORTS + i);
-
- stl_brds[brdp->brdnr] = NULL;
- kfree(brdp);
-}
-
-static struct pci_driver stl_pcidriver = {
- .name = "stallion",
- .id_table = stl_pcibrds,
- .probe = stl_pciprobe,
- .remove = __devexit_p(stl_pciremove)
-};
-
-/*****************************************************************************/
-
-/*
- * Return the board stats structure to user app.
- */
-
-static int stl_getbrdstats(combrd_t __user *bp)
-{
- combrd_t stl_brdstats;
- struct stlbrd *brdp;
- struct stlpanel *panelp;
- unsigned int i;
-
- if (copy_from_user(&stl_brdstats, bp, sizeof(combrd_t)))
- return -EFAULT;
- if (stl_brdstats.brd >= STL_MAXBRDS)
- return -ENODEV;
- brdp = stl_brds[stl_brdstats.brd];
- if (brdp == NULL)
- return -ENODEV;
-
- memset(&stl_brdstats, 0, sizeof(combrd_t));
- stl_brdstats.brd = brdp->brdnr;
- stl_brdstats.type = brdp->brdtype;
- stl_brdstats.hwid = brdp->hwid;
- stl_brdstats.state = brdp->state;
- stl_brdstats.ioaddr = brdp->ioaddr1;
- stl_brdstats.ioaddr2 = brdp->ioaddr2;
- stl_brdstats.irq = brdp->irq;
- stl_brdstats.nrpanels = brdp->nrpanels;
- stl_brdstats.nrports = brdp->nrports;
- for (i = 0; i < brdp->nrpanels; i++) {
- panelp = brdp->panels[i];
- stl_brdstats.panels[i].panel = i;
- stl_brdstats.panels[i].hwid = panelp->hwid;
- stl_brdstats.panels[i].nrports = panelp->nrports;
- }
-
- return copy_to_user(bp, &stl_brdstats, sizeof(combrd_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Resolve the referenced port number into a port struct pointer.
- */
-
-static struct stlport *stl_getport(int brdnr, int panelnr, int portnr)
-{
- struct stlbrd *brdp;
- struct stlpanel *panelp;
-
- if (brdnr < 0 || brdnr >= STL_MAXBRDS)
- return NULL;
- brdp = stl_brds[brdnr];
- if (brdp == NULL)
- return NULL;
- if (panelnr < 0 || (unsigned int)panelnr >= brdp->nrpanels)
- return NULL;
- panelp = brdp->panels[panelnr];
- if (panelp == NULL)
- return NULL;
- if (portnr < 0 || (unsigned int)portnr >= panelp->nrports)
- return NULL;
- return panelp->ports[portnr];
-}
-
-/*****************************************************************************/
-
-/*
- * Return the port stats structure to user app. A NULL port struct
- * pointer passed in means that we need to find out from the app
- * what port to get stats for (used through board control device).
- */
-
-static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp)
-{
- comstats_t stl_comstats;
- unsigned char *head, *tail;
- unsigned long flags;
-
- if (!portp) {
- if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
- return -EFAULT;
- portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
- stl_comstats.port);
- if (portp == NULL)
- return -ENODEV;
- }
-
- mutex_lock(&portp->port.mutex);
- portp->stats.state = portp->istate;
- portp->stats.flags = portp->port.flags;
- portp->stats.hwid = portp->hwid;
-
- portp->stats.ttystate = 0;
- portp->stats.cflags = 0;
- portp->stats.iflags = 0;
- portp->stats.oflags = 0;
- portp->stats.lflags = 0;
- portp->stats.rxbuffered = 0;
-
- spin_lock_irqsave(&stallion_lock, flags);
- if (tty != NULL && portp->port.tty == tty) {
- portp->stats.ttystate = tty->flags;
- /* No longer available as a statistic */
- portp->stats.rxbuffered = 1; /*tty->flip.count; */
- if (tty->termios != NULL) {
- portp->stats.cflags = tty->termios->c_cflag;
- portp->stats.iflags = tty->termios->c_iflag;
- portp->stats.oflags = tty->termios->c_oflag;
- portp->stats.lflags = tty->termios->c_lflag;
- }
- }
- spin_unlock_irqrestore(&stallion_lock, flags);
-
- head = portp->tx.head;
- tail = portp->tx.tail;
- portp->stats.txbuffered = (head >= tail) ? (head - tail) :
- (STL_TXBUFSIZE - (tail - head));
-
- portp->stats.signals = (unsigned long) stl_getsignals(portp);
- mutex_unlock(&portp->port.mutex);
-
- return copy_to_user(cp, &portp->stats,
- sizeof(comstats_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Clear the port stats structure. We also return it zeroed out...
- */
-
-static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp)
-{
- comstats_t stl_comstats;
-
- if (!portp) {
- if (copy_from_user(&stl_comstats, cp, sizeof(comstats_t)))
- return -EFAULT;
- portp = stl_getport(stl_comstats.brd, stl_comstats.panel,
- stl_comstats.port);
- if (portp == NULL)
- return -ENODEV;
- }
-
- mutex_lock(&portp->port.mutex);
- memset(&portp->stats, 0, sizeof(comstats_t));
- portp->stats.brd = portp->brdnr;
- portp->stats.panel = portp->panelnr;
- portp->stats.port = portp->portnr;
- mutex_unlock(&portp->port.mutex);
- return copy_to_user(cp, &portp->stats,
- sizeof(comstats_t)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the entire driver ports structure to a user app.
- */
-
-static int stl_getportstruct(struct stlport __user *arg)
-{
- struct stlport stl_dummyport;
- struct stlport *portp;
-
- if (copy_from_user(&stl_dummyport, arg, sizeof(struct stlport)))
- return -EFAULT;
- portp = stl_getport(stl_dummyport.brdnr, stl_dummyport.panelnr,
- stl_dummyport.portnr);
- if (!portp)
- return -ENODEV;
- return copy_to_user(arg, portp, sizeof(struct stlport)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Return the entire driver board structure to a user app.
- */
-
-static int stl_getbrdstruct(struct stlbrd __user *arg)
-{
- struct stlbrd stl_dummybrd;
- struct stlbrd *brdp;
-
- if (copy_from_user(&stl_dummybrd, arg, sizeof(struct stlbrd)))
- return -EFAULT;
- if (stl_dummybrd.brdnr >= STL_MAXBRDS)
- return -ENODEV;
- brdp = stl_brds[stl_dummybrd.brdnr];
- if (!brdp)
- return -ENODEV;
- return copy_to_user(arg, brdp, sizeof(struct stlbrd)) ? -EFAULT : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * The "staliomem" device is also required to do some special operations
- * on the board and/or ports. In this driver it is mostly used for stats
- * collection.
- */
-
-static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg)
-{
- int brdnr, rc;
- void __user *argp = (void __user *)arg;
-
- pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg);
-
- brdnr = iminor(fp->f_dentry->d_inode);
- if (brdnr >= STL_MAXBRDS)
- return -ENODEV;
- rc = 0;
-
- switch (cmd) {
- case COM_GETPORTSTATS:
- rc = stl_getportstats(NULL, NULL, argp);
- break;
- case COM_CLRPORTSTATS:
- rc = stl_clrportstats(NULL, argp);
- break;
- case COM_GETBRDSTATS:
- rc = stl_getbrdstats(argp);
- break;
- case COM_READPORT:
- rc = stl_getportstruct(argp);
- break;
- case COM_READBOARD:
- rc = stl_getbrdstruct(argp);
- break;
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- return rc;
-}
-
-static const struct tty_operations stl_ops = {
- .open = stl_open,
- .close = stl_close,
- .write = stl_write,
- .put_char = stl_putchar,
- .flush_chars = stl_flushchars,
- .write_room = stl_writeroom,
- .chars_in_buffer = stl_charsinbuffer,
- .ioctl = stl_ioctl,
- .set_termios = stl_settermios,
- .throttle = stl_throttle,
- .unthrottle = stl_unthrottle,
- .stop = stl_stop,
- .start = stl_start,
- .hangup = stl_hangup,
- .flush_buffer = stl_flushbuffer,
- .break_ctl = stl_breakctl,
- .wait_until_sent = stl_waituntilsent,
- .send_xchar = stl_sendxchar,
- .tiocmget = stl_tiocmget,
- .tiocmset = stl_tiocmset,
- .proc_fops = &stl_proc_fops,
-};
-
-static const struct tty_port_operations stl_port_ops = {
- .carrier_raised = stl_carrier_raised,
- .dtr_rts = stl_dtr_rts,
- .activate = stl_activate,
- .shutdown = stl_shutdown,
-};
-
-/*****************************************************************************/
-/* CD1400 HARDWARE FUNCTIONS */
-/*****************************************************************************/
-
-/*
- * These functions get/set/update the registers of the cd1400 UARTs.
- * Access to the cd1400 registers is via an address/data io port pair.
- * (Maybe should make this inline...)
- */
-
-static int stl_cd1400getreg(struct stlport *portp, int regnr)
-{
- outb((regnr + portp->uartaddr), portp->ioaddr);
- return inb(portp->ioaddr + EREG_DATA);
-}
-
-static void stl_cd1400setreg(struct stlport *portp, int regnr, int value)
-{
- outb(regnr + portp->uartaddr, portp->ioaddr);
- outb(value, portp->ioaddr + EREG_DATA);
-}
-
-static int stl_cd1400updatereg(struct stlport *portp, int regnr, int value)
-{
- outb(regnr + portp->uartaddr, portp->ioaddr);
- if (inb(portp->ioaddr + EREG_DATA) != value) {
- outb(value, portp->ioaddr + EREG_DATA);
- return 1;
- }
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Inbitialize the UARTs in a panel. We don't care what sort of board
- * these ports are on - since the port io registers are almost
- * identical when dealing with ports.
- */
-
-static int stl_cd1400panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
-{
- unsigned int gfrcr;
- int chipmask, i, j;
- int nrchips, uartaddr, ioaddr;
- unsigned long flags;
-
- pr_debug("stl_panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(panelp->brdnr, panelp->pagenr);
-
-/*
- * Check that each chip is present and started up OK.
- */
- chipmask = 0;
- nrchips = panelp->nrports / CD1400_PORTS;
- for (i = 0; i < nrchips; i++) {
- if (brdp->brdtype == BRD_ECHPCI) {
- outb((panelp->pagenr + (i >> 1)), brdp->ioctrl);
- ioaddr = panelp->iobase;
- } else
- ioaddr = panelp->iobase + (EREG_BANKSIZE * (i >> 1));
- uartaddr = (i & 0x01) ? 0x080 : 0;
- outb((GFRCR + uartaddr), ioaddr);
- outb(0, (ioaddr + EREG_DATA));
- outb((CCR + uartaddr), ioaddr);
- outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
- outb(CCR_RESETFULL, (ioaddr + EREG_DATA));
- outb((GFRCR + uartaddr), ioaddr);
- for (j = 0; j < CCR_MAXWAIT; j++)
- if ((gfrcr = inb(ioaddr + EREG_DATA)) != 0)
- break;
-
- if ((j >= CCR_MAXWAIT) || (gfrcr < 0x40) || (gfrcr > 0x60)) {
- printk("STALLION: cd1400 not responding, "
- "brd=%d panel=%d chip=%d\n",
- panelp->brdnr, panelp->panelnr, i);
- continue;
- }
- chipmask |= (0x1 << i);
- outb((PPR + uartaddr), ioaddr);
- outb(PPR_SCALAR, (ioaddr + EREG_DATA));
- }
-
- BRDDISABLE(panelp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
- return chipmask;
-}
-
-/*****************************************************************************/
-
-/*
- * Initialize hardware specific port registers.
- */
-
-static void stl_cd1400portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
-{
- unsigned long flags;
- pr_debug("stl_cd1400portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
- panelp, portp);
-
- if ((brdp == NULL) || (panelp == NULL) ||
- (portp == NULL))
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- portp->ioaddr = panelp->iobase + (((brdp->brdtype == BRD_ECHPCI) ||
- (portp->portnr < 8)) ? 0 : EREG_BANKSIZE);
- portp->uartaddr = (portp->portnr & 0x04) << 5;
- portp->pagenr = panelp->pagenr + (portp->portnr >> 3);
-
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400setreg(portp, LIVR, (portp->portnr << 3));
- portp->hwid = stl_cd1400getreg(portp, GFRCR);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Wait for the command register to be ready. We will poll this,
- * since it won't usually take too long to be ready.
- */
-
-static void stl_cd1400ccrwait(struct stlport *portp)
-{
- int i;
-
- for (i = 0; i < CCR_MAXWAIT; i++)
- if (stl_cd1400getreg(portp, CCR) == 0)
- return;
-
- printk("STALLION: cd1400 not responding, port=%d panel=%d brd=%d\n",
- portp->portnr, portp->panelnr, portp->brdnr);
-}
-
-/*****************************************************************************/
-
-/*
- * Set up the cd1400 registers for a port based on the termios port
- * settings.
- */
-
-static void stl_cd1400setport(struct stlport *portp, struct ktermios *tiosp)
-{
- struct stlbrd *brdp;
- unsigned long flags;
- unsigned int clkdiv, baudrate;
- unsigned char cor1, cor2, cor3;
- unsigned char cor4, cor5, ccr;
- unsigned char srer, sreron, sreroff;
- unsigned char mcor1, mcor2, rtpr;
- unsigned char clk, div;
-
- cor1 = 0;
- cor2 = 0;
- cor3 = 0;
- cor4 = 0;
- cor5 = 0;
- ccr = 0;
- rtpr = 0;
- clk = 0;
- div = 0;
- mcor1 = 0;
- mcor2 = 0;
- sreron = 0;
- sreroff = 0;
-
- brdp = stl_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
-/*
- * Set up the RX char ignore mask with those RX error types we
- * can ignore. We can get the cd1400 to help us out a little here,
- * it will ignore parity errors and breaks for us.
- */
- portp->rxignoremsk = 0;
- if (tiosp->c_iflag & IGNPAR) {
- portp->rxignoremsk |= (ST_PARITY | ST_FRAMING | ST_OVERRUN);
- cor1 |= COR1_PARIGNORE;
- }
- if (tiosp->c_iflag & IGNBRK) {
- portp->rxignoremsk |= ST_BREAK;
- cor4 |= COR4_IGNBRK;
- }
-
- portp->rxmarkmsk = ST_OVERRUN;
- if (tiosp->c_iflag & (INPCK | PARMRK))
- portp->rxmarkmsk |= (ST_PARITY | ST_FRAMING);
- if (tiosp->c_iflag & BRKINT)
- portp->rxmarkmsk |= ST_BREAK;
-
-/*
- * Go through the char size, parity and stop bits and set all the
- * option register appropriately.
- */
- switch (tiosp->c_cflag & CSIZE) {
- case CS5:
- cor1 |= COR1_CHL5;
- break;
- case CS6:
- cor1 |= COR1_CHL6;
- break;
- case CS7:
- cor1 |= COR1_CHL7;
- break;
- default:
- cor1 |= COR1_CHL8;
- break;
- }
-
- if (tiosp->c_cflag & CSTOPB)
- cor1 |= COR1_STOP2;
- else
- cor1 |= COR1_STOP1;
-
- if (tiosp->c_cflag & PARENB) {
- if (tiosp->c_cflag & PARODD)
- cor1 |= (COR1_PARENB | COR1_PARODD);
- else
- cor1 |= (COR1_PARENB | COR1_PAREVEN);
- } else {
- cor1 |= COR1_PARNONE;
- }
-
-/*
- * Set the RX FIFO threshold at 6 chars. This gives a bit of breathing
- * space for hardware flow control and the like. This should be set to
- * VMIN. Also here we will set the RX data timeout to 10ms - this should
- * really be based on VTIME.
- */
- cor3 |= FIFO_RXTHRESHOLD;
- rtpr = 2;
-
-/*
- * Calculate the baud rate timers. For now we will just assume that
- * the input and output baud are the same. Could have used a baud
- * table here, but this way we can generate virtually any baud rate
- * we like!
- */
- baudrate = tiosp->c_cflag & CBAUD;
- if (baudrate & CBAUDEX) {
- baudrate &= ~CBAUDEX;
- if ((baudrate < 1) || (baudrate > 4))
- tiosp->c_cflag &= ~CBAUDEX;
- else
- baudrate += 15;
- }
- baudrate = stl_baudrates[baudrate];
- if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- baudrate = 57600;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baudrate = 115200;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- baudrate = 230400;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- baudrate = 460800;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
- baudrate = (portp->baud_base / portp->custom_divisor);
- }
- if (baudrate > STL_CD1400MAXBAUD)
- baudrate = STL_CD1400MAXBAUD;
-
- if (baudrate > 0) {
- for (clk = 0; clk < CD1400_NUMCLKS; clk++) {
- clkdiv = (portp->clk / stl_cd1400clkdivs[clk]) / baudrate;
- if (clkdiv < 0x100)
- break;
- }
- div = (unsigned char) clkdiv;
- }
-
-/*
- * Check what form of modem signaling is required and set it up.
- */
- if ((tiosp->c_cflag & CLOCAL) == 0) {
- mcor1 |= MCOR1_DCD;
- mcor2 |= MCOR2_DCD;
- sreron |= SRER_MODEM;
- portp->port.flags |= ASYNC_CHECK_CD;
- } else
- portp->port.flags &= ~ASYNC_CHECK_CD;
-
-/*
- * Setup cd1400 enhanced modes if we can. In particular we want to
- * handle as much of the flow control as possible automatically. As
- * well as saving a few CPU cycles it will also greatly improve flow
- * control reliability.
- */
- if (tiosp->c_iflag & IXON) {
- cor2 |= COR2_TXIBE;
- cor3 |= COR3_SCD12;
- if (tiosp->c_iflag & IXANY)
- cor2 |= COR2_IXM;
- }
-
- if (tiosp->c_cflag & CRTSCTS) {
- cor2 |= COR2_CTSAE;
- mcor1 |= FIFO_RTSTHRESHOLD;
- }
-
-/*
- * All cd1400 register values calculated so go through and set
- * them all up.
- */
-
- pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
- portp->portnr, portp->panelnr, portp->brdnr);
- pr_debug(" cor1=%x cor2=%x cor3=%x cor4=%x cor5=%x\n",
- cor1, cor2, cor3, cor4, cor5);
- pr_debug(" mcor1=%x mcor2=%x rtpr=%x sreron=%x sreroff=%x\n",
- mcor1, mcor2, rtpr, sreron, sreroff);
- pr_debug(" tcor=%x tbpr=%x rcor=%x rbpr=%x\n", clk, div, clk, div);
- pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
- tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
- tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x3));
- srer = stl_cd1400getreg(portp, SRER);
- stl_cd1400setreg(portp, SRER, 0);
- if (stl_cd1400updatereg(portp, COR1, cor1))
- ccr = 1;
- if (stl_cd1400updatereg(portp, COR2, cor2))
- ccr = 1;
- if (stl_cd1400updatereg(portp, COR3, cor3))
- ccr = 1;
- if (ccr) {
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_CORCHANGE);
- }
- stl_cd1400setreg(portp, COR4, cor4);
- stl_cd1400setreg(portp, COR5, cor5);
- stl_cd1400setreg(portp, MCOR1, mcor1);
- stl_cd1400setreg(portp, MCOR2, mcor2);
- if (baudrate > 0) {
- stl_cd1400setreg(portp, TCOR, clk);
- stl_cd1400setreg(portp, TBPR, div);
- stl_cd1400setreg(portp, RCOR, clk);
- stl_cd1400setreg(portp, RBPR, div);
- }
- stl_cd1400setreg(portp, SCHR1, tiosp->c_cc[VSTART]);
- stl_cd1400setreg(portp, SCHR2, tiosp->c_cc[VSTOP]);
- stl_cd1400setreg(portp, SCHR3, tiosp->c_cc[VSTART]);
- stl_cd1400setreg(portp, SCHR4, tiosp->c_cc[VSTOP]);
- stl_cd1400setreg(portp, RTPR, rtpr);
- mcor1 = stl_cd1400getreg(portp, MSVR1);
- if (mcor1 & MSVR1_DCD)
- portp->sigs |= TIOCM_CD;
- else
- portp->sigs &= ~TIOCM_CD;
- stl_cd1400setreg(portp, SRER, ((srer & ~sreroff) | sreron));
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Set the state of the DTR and RTS signals.
- */
-
-static void stl_cd1400setsignals(struct stlport *portp, int dtr, int rts)
-{
- unsigned char msvr1, msvr2;
- unsigned long flags;
-
- pr_debug("stl_cd1400setsignals(portp=%p,dtr=%d,rts=%d)\n",
- portp, dtr, rts);
-
- msvr1 = 0;
- msvr2 = 0;
- if (dtr > 0)
- msvr1 = MSVR1_DTR;
- if (rts > 0)
- msvr2 = MSVR2_RTS;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- if (rts >= 0)
- stl_cd1400setreg(portp, MSVR2, msvr2);
- if (dtr >= 0)
- stl_cd1400setreg(portp, MSVR1, msvr1);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Return the state of the signals.
- */
-
-static int stl_cd1400getsignals(struct stlport *portp)
-{
- unsigned char msvr1, msvr2;
- unsigned long flags;
- int sigs;
-
- pr_debug("stl_cd1400getsignals(portp=%p)\n", portp);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- msvr1 = stl_cd1400getreg(portp, MSVR1);
- msvr2 = stl_cd1400getreg(portp, MSVR2);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- sigs = 0;
- sigs |= (msvr1 & MSVR1_DCD) ? TIOCM_CD : 0;
- sigs |= (msvr1 & MSVR1_CTS) ? TIOCM_CTS : 0;
- sigs |= (msvr1 & MSVR1_DTR) ? TIOCM_DTR : 0;
- sigs |= (msvr2 & MSVR2_RTS) ? TIOCM_RTS : 0;
-#if 0
- sigs |= (msvr1 & MSVR1_RI) ? TIOCM_RI : 0;
- sigs |= (msvr1 & MSVR1_DSR) ? TIOCM_DSR : 0;
-#else
- sigs |= TIOCM_DSR;
-#endif
- return sigs;
-}
-
-/*****************************************************************************/
-
-/*
- * Enable/Disable the Transmitter and/or Receiver.
- */
-
-static void stl_cd1400enablerxtx(struct stlport *portp, int rx, int tx)
-{
- unsigned char ccr;
- unsigned long flags;
-
- pr_debug("stl_cd1400enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
- ccr = 0;
-
- if (tx == 0)
- ccr |= CCR_TXDISABLE;
- else if (tx > 0)
- ccr |= CCR_TXENABLE;
- if (rx == 0)
- ccr |= CCR_RXDISABLE;
- else if (rx > 0)
- ccr |= CCR_RXENABLE;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, ccr);
- stl_cd1400ccrwait(portp);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Start/stop the Transmitter and/or Receiver.
- */
-
-static void stl_cd1400startrxtx(struct stlport *portp, int rx, int tx)
-{
- unsigned char sreron, sreroff;
- unsigned long flags;
-
- pr_debug("stl_cd1400startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
- sreron = 0;
- sreroff = 0;
- if (tx == 0)
- sreroff |= (SRER_TXDATA | SRER_TXEMPTY);
- else if (tx == 1)
- sreron |= SRER_TXDATA;
- else if (tx >= 2)
- sreron |= SRER_TXEMPTY;
- if (rx == 0)
- sreroff |= SRER_RXDATA;
- else if (rx > 0)
- sreron |= SRER_RXDATA;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400setreg(portp, SRER,
- ((stl_cd1400getreg(portp, SRER) & ~sreroff) | sreron));
- BRDDISABLE(portp->brdnr);
- if (tx > 0)
- set_bit(ASYI_TXBUSY, &portp->istate);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Disable all interrupts from this port.
- */
-
-static void stl_cd1400disableintrs(struct stlport *portp)
-{
- unsigned long flags;
-
- pr_debug("stl_cd1400disableintrs(portp=%p)\n", portp);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400setreg(portp, SRER, 0);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static void stl_cd1400sendbreak(struct stlport *portp, int len)
-{
- unsigned long flags;
-
- pr_debug("stl_cd1400sendbreak(portp=%p,len=%d)\n", portp, len);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400setreg(portp, SRER,
- ((stl_cd1400getreg(portp, SRER) & ~SRER_TXDATA) |
- SRER_TXEMPTY));
- BRDDISABLE(portp->brdnr);
- portp->brklen = len;
- if (len == 1)
- portp->stats.txbreaks++;
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Take flow control actions...
- */
-
-static void stl_cd1400flowctrl(struct stlport *portp, int state)
-{
- struct tty_struct *tty;
- unsigned long flags;
-
- pr_debug("stl_cd1400flowctrl(portp=%p,state=%x)\n", portp, state);
-
- if (portp == NULL)
- return;
- tty = tty_port_tty_get(&portp->port);
- if (tty == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
-
- if (state) {
- if (tty->termios->c_iflag & IXOFF) {
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
- portp->stats.rxxon++;
- stl_cd1400ccrwait(portp);
- }
-/*
- * Question: should we return RTS to what it was before? It may
- * have been set by an ioctl... Suppose not, since if you have
- * hardware flow control set then it is pretty silly to go and
- * set the RTS line by hand.
- */
- if (tty->termios->c_cflag & CRTSCTS) {
- stl_cd1400setreg(portp, MCOR1,
- (stl_cd1400getreg(portp, MCOR1) |
- FIFO_RTSTHRESHOLD));
- stl_cd1400setreg(portp, MSVR2, MSVR2_RTS);
- portp->stats.rxrtson++;
- }
- } else {
- if (tty->termios->c_iflag & IXOFF) {
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
- portp->stats.rxxoff++;
- stl_cd1400ccrwait(portp);
- }
- if (tty->termios->c_cflag & CRTSCTS) {
- stl_cd1400setreg(portp, MCOR1,
- (stl_cd1400getreg(portp, MCOR1) & 0xf0));
- stl_cd1400setreg(portp, MSVR2, 0);
- portp->stats.rxrtsoff++;
- }
- }
-
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- * Send a flow control character...
- */
-
-static void stl_cd1400sendflow(struct stlport *portp, int state)
-{
- struct tty_struct *tty;
- unsigned long flags;
-
- pr_debug("stl_cd1400sendflow(portp=%p,state=%x)\n", portp, state);
-
- if (portp == NULL)
- return;
- tty = tty_port_tty_get(&portp->port);
- if (tty == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- if (state) {
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_SENDSCHR1);
- portp->stats.rxxon++;
- stl_cd1400ccrwait(portp);
- } else {
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_SENDSCHR2);
- portp->stats.rxxoff++;
- stl_cd1400ccrwait(portp);
- }
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_cd1400flush(struct stlport *portp)
-{
- unsigned long flags;
-
- pr_debug("stl_cd1400flush(portp=%p)\n", portp);
-
- if (portp == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_cd1400setreg(portp, CAR, (portp->portnr & 0x03));
- stl_cd1400ccrwait(portp);
- stl_cd1400setreg(portp, CCR, CCR_TXFLUSHFIFO);
- stl_cd1400ccrwait(portp);
- portp->tx.tail = portp->tx.head;
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Return the current state of data flow on this port. This is only
- * really interesting when determining if data has fully completed
- * transmission or not... This is easy for the cd1400, it accurately
- * maintains the busy port flag.
- */
-
-static int stl_cd1400datastate(struct stlport *portp)
-{
- pr_debug("stl_cd1400datastate(portp=%p)\n", portp);
-
- if (portp == NULL)
- return 0;
-
- return test_bit(ASYI_TXBUSY, &portp->istate) ? 1 : 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for cd1400 EasyIO boards.
- */
-
-static void stl_cd1400eiointr(struct stlpanel *panelp, unsigned int iobase)
-{
- unsigned char svrtype;
-
- pr_debug("stl_cd1400eiointr(panelp=%p,iobase=%x)\n", panelp, iobase);
-
- spin_lock(&brd_lock);
- outb(SVRR, iobase);
- svrtype = inb(iobase + EREG_DATA);
- if (panelp->nrports > 4) {
- outb((SVRR + 0x80), iobase);
- svrtype |= inb(iobase + EREG_DATA);
- }
-
- if (svrtype & SVRR_RX)
- stl_cd1400rxisr(panelp, iobase);
- else if (svrtype & SVRR_TX)
- stl_cd1400txisr(panelp, iobase);
- else if (svrtype & SVRR_MDM)
- stl_cd1400mdmisr(panelp, iobase);
-
- spin_unlock(&brd_lock);
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for cd1400 panels.
- */
-
-static void stl_cd1400echintr(struct stlpanel *panelp, unsigned int iobase)
-{
- unsigned char svrtype;
-
- pr_debug("stl_cd1400echintr(panelp=%p,iobase=%x)\n", panelp, iobase);
-
- outb(SVRR, iobase);
- svrtype = inb(iobase + EREG_DATA);
- outb((SVRR + 0x80), iobase);
- svrtype |= inb(iobase + EREG_DATA);
- if (svrtype & SVRR_RX)
- stl_cd1400rxisr(panelp, iobase);
- else if (svrtype & SVRR_TX)
- stl_cd1400txisr(panelp, iobase);
- else if (svrtype & SVRR_MDM)
- stl_cd1400mdmisr(panelp, iobase);
-}
-
-
-/*****************************************************************************/
-
-/*
- * Unfortunately we need to handle breaks in the TX data stream, since
- * this is the only way to generate them on the cd1400.
- */
-
-static int stl_cd1400breakisr(struct stlport *portp, int ioaddr)
-{
- if (portp->brklen == 1) {
- outb((COR2 + portp->uartaddr), ioaddr);
- outb((inb(ioaddr + EREG_DATA) | COR2_ETC),
- (ioaddr + EREG_DATA));
- outb((TDR + portp->uartaddr), ioaddr);
- outb(ETC_CMD, (ioaddr + EREG_DATA));
- outb(ETC_STARTBREAK, (ioaddr + EREG_DATA));
- outb((SRER + portp->uartaddr), ioaddr);
- outb((inb(ioaddr + EREG_DATA) & ~(SRER_TXDATA | SRER_TXEMPTY)),
- (ioaddr + EREG_DATA));
- return 1;
- } else if (portp->brklen > 1) {
- outb((TDR + portp->uartaddr), ioaddr);
- outb(ETC_CMD, (ioaddr + EREG_DATA));
- outb(ETC_STOPBREAK, (ioaddr + EREG_DATA));
- portp->brklen = -1;
- return 1;
- } else {
- outb((COR2 + portp->uartaddr), ioaddr);
- outb((inb(ioaddr + EREG_DATA) & ~COR2_ETC),
- (ioaddr + EREG_DATA));
- portp->brklen = 0;
- }
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Transmit interrupt handler. This has gotta be fast! Handling TX
- * chars is pretty simple, stuff as many as possible from the TX buffer
- * into the cd1400 FIFO. Must also handle TX breaks here, since they
- * are embedded as commands in the data stream. Oh no, had to use a goto!
- * This could be optimized more, will do when I get time...
- * In practice it is possible that interrupts are enabled but that the
- * port has been hung up. Need to handle not having any TX buffer here,
- * this is done by using the side effect that head and tail will also
- * be NULL if the buffer has been freed.
- */
-
-static void stl_cd1400txisr(struct stlpanel *panelp, int ioaddr)
-{
- struct stlport *portp;
- int len, stlen;
- char *head, *tail;
- unsigned char ioack, srer;
- struct tty_struct *tty;
-
- pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
-
- ioack = inb(ioaddr + EREG_TXACK);
- if (((ioack & panelp->ackmask) != 0) ||
- ((ioack & ACK_TYPMASK) != ACK_TYPTX)) {
- printk("STALLION: bad TX interrupt ack value=%x\n", ioack);
- return;
- }
- portp = panelp->ports[(ioack >> 3)];
-
-/*
- * Unfortunately we need to handle breaks in the data stream, since
- * this is the only way to generate them on the cd1400. Do it now if
- * a break is to be sent.
- */
- if (portp->brklen != 0)
- if (stl_cd1400breakisr(portp, ioaddr))
- goto stl_txalldone;
-
- head = portp->tx.head;
- tail = portp->tx.tail;
- len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
- if ((len == 0) || ((len < STL_TXBUFLOW) &&
- (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
- set_bit(ASYI_TXLOW, &portp->istate);
- tty = tty_port_tty_get(&portp->port);
- if (tty) {
- tty_wakeup(tty);
- tty_kref_put(tty);
- }
- }
-
- if (len == 0) {
- outb((SRER + portp->uartaddr), ioaddr);
- srer = inb(ioaddr + EREG_DATA);
- if (srer & SRER_TXDATA) {
- srer = (srer & ~SRER_TXDATA) | SRER_TXEMPTY;
- } else {
- srer &= ~(SRER_TXDATA | SRER_TXEMPTY);
- clear_bit(ASYI_TXBUSY, &portp->istate);
- }
- outb(srer, (ioaddr + EREG_DATA));
- } else {
- len = min(len, CD1400_TXFIFOSIZE);
- portp->stats.txtotal += len;
- stlen = min_t(unsigned int, len,
- (portp->tx.buf + STL_TXBUFSIZE) - tail);
- outb((TDR + portp->uartaddr), ioaddr);
- outsb((ioaddr + EREG_DATA), tail, stlen);
- len -= stlen;
- tail += stlen;
- if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
- tail = portp->tx.buf;
- if (len > 0) {
- outsb((ioaddr + EREG_DATA), tail, len);
- tail += len;
- }
- portp->tx.tail = tail;
- }
-
-stl_txalldone:
- outb((EOSRR + portp->uartaddr), ioaddr);
- outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-
-/*
- * Receive character interrupt handler. Determine if we have good chars
- * or bad chars and then process appropriately. Good chars are easy
- * just shove the lot into the RX buffer and set all status byte to 0.
- * If a bad RX char then process as required. This routine needs to be
- * fast! In practice it is possible that we get an interrupt on a port
- * that is closed. This can happen on hangups - since they completely
- * shutdown a port not in user context. Need to handle this case.
- */
-
-static void stl_cd1400rxisr(struct stlpanel *panelp, int ioaddr)
-{
- struct stlport *portp;
- struct tty_struct *tty;
- unsigned int ioack, len, buflen;
- unsigned char status;
- char ch;
-
- pr_debug("stl_cd1400rxisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
-
- ioack = inb(ioaddr + EREG_RXACK);
- if ((ioack & panelp->ackmask) != 0) {
- printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
- return;
- }
- portp = panelp->ports[(ioack >> 3)];
- tty = tty_port_tty_get(&portp->port);
-
- if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
- outb((RDCR + portp->uartaddr), ioaddr);
- len = inb(ioaddr + EREG_DATA);
- if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = min_t(unsigned int, len, sizeof(stl_unwanted));
- outb((RDSR + portp->uartaddr), ioaddr);
- insb((ioaddr + EREG_DATA), &stl_unwanted[0], len);
- portp->stats.rxlost += len;
- portp->stats.rxtotal += len;
- } else {
- len = min(len, buflen);
- if (len > 0) {
- unsigned char *ptr;
- outb((RDSR + portp->uartaddr), ioaddr);
- tty_prepare_flip_string(tty, &ptr, len);
- insb((ioaddr + EREG_DATA), ptr, len);
- tty_schedule_flip(tty);
- portp->stats.rxtotal += len;
- }
- }
- } else if ((ioack & ACK_TYPMASK) == ACK_TYPRXBAD) {
- outb((RDSR + portp->uartaddr), ioaddr);
- status = inb(ioaddr + EREG_DATA);
- ch = inb(ioaddr + EREG_DATA);
- if (status & ST_PARITY)
- portp->stats.rxparity++;
- if (status & ST_FRAMING)
- portp->stats.rxframing++;
- if (status & ST_OVERRUN)
- portp->stats.rxoverrun++;
- if (status & ST_BREAK)
- portp->stats.rxbreaks++;
- if (status & ST_SCHARMASK) {
- if ((status & ST_SCHARMASK) == ST_SCHAR1)
- portp->stats.txxon++;
- if ((status & ST_SCHARMASK) == ST_SCHAR2)
- portp->stats.txxoff++;
- goto stl_rxalldone;
- }
- if (tty != NULL && (portp->rxignoremsk & status) == 0) {
- if (portp->rxmarkmsk & status) {
- if (status & ST_BREAK) {
- status = TTY_BREAK;
- if (portp->port.flags & ASYNC_SAK) {
- do_SAK(tty);
- BRDENABLE(portp->brdnr, portp->pagenr);
- }
- } else if (status & ST_PARITY)
- status = TTY_PARITY;
- else if (status & ST_FRAMING)
- status = TTY_FRAME;
- else if(status & ST_OVERRUN)
- status = TTY_OVERRUN;
- else
- status = 0;
- } else
- status = 0;
- tty_insert_flip_char(tty, ch, status);
- tty_schedule_flip(tty);
- }
- } else {
- printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
- tty_kref_put(tty);
- return;
- }
-
-stl_rxalldone:
- tty_kref_put(tty);
- outb((EOSRR + portp->uartaddr), ioaddr);
- outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-
-/*
- * Modem interrupt handler. The is called when the modem signal line
- * (DCD) has changed state. Leave most of the work to the off-level
- * processing routine.
- */
-
-static void stl_cd1400mdmisr(struct stlpanel *panelp, int ioaddr)
-{
- struct stlport *portp;
- unsigned int ioack;
- unsigned char misr;
-
- pr_debug("stl_cd1400mdmisr(panelp=%p)\n", panelp);
-
- ioack = inb(ioaddr + EREG_MDACK);
- if (((ioack & panelp->ackmask) != 0) ||
- ((ioack & ACK_TYPMASK) != ACK_TYPMDM)) {
- printk("STALLION: bad MODEM interrupt ack value=%x\n", ioack);
- return;
- }
- portp = panelp->ports[(ioack >> 3)];
-
- outb((MISR + portp->uartaddr), ioaddr);
- misr = inb(ioaddr + EREG_DATA);
- if (misr & MISR_DCD) {
- stl_cd_change(portp);
- portp->stats.modem++;
- }
-
- outb((EOSRR + portp->uartaddr), ioaddr);
- outb(0, (ioaddr + EREG_DATA));
-}
-
-/*****************************************************************************/
-/* SC26198 HARDWARE FUNCTIONS */
-/*****************************************************************************/
-
-/*
- * These functions get/set/update the registers of the sc26198 UARTs.
- * Access to the sc26198 registers is via an address/data io port pair.
- * (Maybe should make this inline...)
- */
-
-static int stl_sc26198getreg(struct stlport *portp, int regnr)
-{
- outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
- return inb(portp->ioaddr + XP_DATA);
-}
-
-static void stl_sc26198setreg(struct stlport *portp, int regnr, int value)
-{
- outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
- outb(value, (portp->ioaddr + XP_DATA));
-}
-
-static int stl_sc26198updatereg(struct stlport *portp, int regnr, int value)
-{
- outb((regnr | portp->uartaddr), (portp->ioaddr + XP_ADDR));
- if (inb(portp->ioaddr + XP_DATA) != value) {
- outb(value, (portp->ioaddr + XP_DATA));
- return 1;
- }
- return 0;
-}
-
-/*****************************************************************************/
-
-/*
- * Functions to get and set the sc26198 global registers.
- */
-
-static int stl_sc26198getglobreg(struct stlport *portp, int regnr)
-{
- outb(regnr, (portp->ioaddr + XP_ADDR));
- return inb(portp->ioaddr + XP_DATA);
-}
-
-#if 0
-static void stl_sc26198setglobreg(struct stlport *portp, int regnr, int value)
-{
- outb(regnr, (portp->ioaddr + XP_ADDR));
- outb(value, (portp->ioaddr + XP_DATA));
-}
-#endif
-
-/*****************************************************************************/
-
-/*
- * Inbitialize the UARTs in a panel. We don't care what sort of board
- * these ports are on - since the port io registers are almost
- * identical when dealing with ports.
- */
-
-static int stl_sc26198panelinit(struct stlbrd *brdp, struct stlpanel *panelp)
-{
- int chipmask, i;
- int nrchips, ioaddr;
-
- pr_debug("stl_sc26198panelinit(brdp=%p,panelp=%p)\n", brdp, panelp);
-
- BRDENABLE(panelp->brdnr, panelp->pagenr);
-
-/*
- * Check that each chip is present and started up OK.
- */
- chipmask = 0;
- nrchips = (panelp->nrports + 4) / SC26198_PORTS;
- if (brdp->brdtype == BRD_ECHPCI)
- outb(panelp->pagenr, brdp->ioctrl);
-
- for (i = 0; i < nrchips; i++) {
- ioaddr = panelp->iobase + (i * 4);
- outb(SCCR, (ioaddr + XP_ADDR));
- outb(CR_RESETALL, (ioaddr + XP_DATA));
- outb(TSTR, (ioaddr + XP_ADDR));
- if (inb(ioaddr + XP_DATA) != 0) {
- printk("STALLION: sc26198 not responding, "
- "brd=%d panel=%d chip=%d\n",
- panelp->brdnr, panelp->panelnr, i);
- continue;
- }
- chipmask |= (0x1 << i);
- outb(GCCR, (ioaddr + XP_ADDR));
- outb(GCCR_IVRTYPCHANACK, (ioaddr + XP_DATA));
- outb(WDTRCR, (ioaddr + XP_ADDR));
- outb(0xff, (ioaddr + XP_DATA));
- }
-
- BRDDISABLE(panelp->brdnr);
- return chipmask;
-}
-
-/*****************************************************************************/
-
-/*
- * Initialize hardware specific port registers.
- */
-
-static void stl_sc26198portinit(struct stlbrd *brdp, struct stlpanel *panelp, struct stlport *portp)
-{
- pr_debug("stl_sc26198portinit(brdp=%p,panelp=%p,portp=%p)\n", brdp,
- panelp, portp);
-
- if ((brdp == NULL) || (panelp == NULL) ||
- (portp == NULL))
- return;
-
- portp->ioaddr = panelp->iobase + ((portp->portnr < 8) ? 0 : 4);
- portp->uartaddr = (portp->portnr & 0x07) << 4;
- portp->pagenr = panelp->pagenr;
- portp->hwid = 0x1;
-
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, IOPCR, IOPCR_SETSIGS);
- BRDDISABLE(portp->brdnr);
-}
-
-/*****************************************************************************/
-
-/*
- * Set up the sc26198 registers for a port based on the termios port
- * settings.
- */
-
-static void stl_sc26198setport(struct stlport *portp, struct ktermios *tiosp)
-{
- struct stlbrd *brdp;
- unsigned long flags;
- unsigned int baudrate;
- unsigned char mr0, mr1, mr2, clk;
- unsigned char imron, imroff, iopr, ipr;
-
- mr0 = 0;
- mr1 = 0;
- mr2 = 0;
- clk = 0;
- iopr = 0;
- imron = 0;
- imroff = 0;
-
- brdp = stl_brds[portp->brdnr];
- if (brdp == NULL)
- return;
-
-/*
- * Set up the RX char ignore mask with those RX error types we
- * can ignore.
- */
- portp->rxignoremsk = 0;
- if (tiosp->c_iflag & IGNPAR)
- portp->rxignoremsk |= (SR_RXPARITY | SR_RXFRAMING |
- SR_RXOVERRUN);
- if (tiosp->c_iflag & IGNBRK)
- portp->rxignoremsk |= SR_RXBREAK;
-
- portp->rxmarkmsk = SR_RXOVERRUN;
- if (tiosp->c_iflag & (INPCK | PARMRK))
- portp->rxmarkmsk |= (SR_RXPARITY | SR_RXFRAMING);
- if (tiosp->c_iflag & BRKINT)
- portp->rxmarkmsk |= SR_RXBREAK;
-
-/*
- * Go through the char size, parity and stop bits and set all the
- * option register appropriately.
- */
- switch (tiosp->c_cflag & CSIZE) {
- case CS5:
- mr1 |= MR1_CS5;
- break;
- case CS6:
- mr1 |= MR1_CS6;
- break;
- case CS7:
- mr1 |= MR1_CS7;
- break;
- default:
- mr1 |= MR1_CS8;
- break;
- }
-
- if (tiosp->c_cflag & CSTOPB)
- mr2 |= MR2_STOP2;
- else
- mr2 |= MR2_STOP1;
-
- if (tiosp->c_cflag & PARENB) {
- if (tiosp->c_cflag & PARODD)
- mr1 |= (MR1_PARENB | MR1_PARODD);
- else
- mr1 |= (MR1_PARENB | MR1_PAREVEN);
- } else
- mr1 |= MR1_PARNONE;
-
- mr1 |= MR1_ERRBLOCK;
-
-/*
- * Set the RX FIFO threshold at 8 chars. This gives a bit of breathing
- * space for hardware flow control and the like. This should be set to
- * VMIN.
- */
- mr2 |= MR2_RXFIFOHALF;
-
-/*
- * Calculate the baud rate timers. For now we will just assume that
- * the input and output baud are the same. The sc26198 has a fixed
- * baud rate table, so only discrete baud rates possible.
- */
- baudrate = tiosp->c_cflag & CBAUD;
- if (baudrate & CBAUDEX) {
- baudrate &= ~CBAUDEX;
- if ((baudrate < 1) || (baudrate > 4))
- tiosp->c_cflag &= ~CBAUDEX;
- else
- baudrate += 15;
- }
- baudrate = stl_baudrates[baudrate];
- if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- baudrate = 57600;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baudrate = 115200;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- baudrate = 230400;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- baudrate = 460800;
- else if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
- baudrate = (portp->baud_base / portp->custom_divisor);
- }
- if (baudrate > STL_SC26198MAXBAUD)
- baudrate = STL_SC26198MAXBAUD;
-
- if (baudrate > 0)
- for (clk = 0; clk < SC26198_NRBAUDS; clk++)
- if (baudrate <= sc26198_baudtable[clk])
- break;
-
-/*
- * Check what form of modem signaling is required and set it up.
- */
- if (tiosp->c_cflag & CLOCAL) {
- portp->port.flags &= ~ASYNC_CHECK_CD;
- } else {
- iopr |= IOPR_DCDCOS;
- imron |= IR_IOPORT;
- portp->port.flags |= ASYNC_CHECK_CD;
- }
-
-/*
- * Setup sc26198 enhanced modes if we can. In particular we want to
- * handle as much of the flow control as possible automatically. As
- * well as saving a few CPU cycles it will also greatly improve flow
- * control reliability.
- */
- if (tiosp->c_iflag & IXON) {
- mr0 |= MR0_SWFTX | MR0_SWFT;
- imron |= IR_XONXOFF;
- } else
- imroff |= IR_XONXOFF;
-
- if (tiosp->c_iflag & IXOFF)
- mr0 |= MR0_SWFRX;
-
- if (tiosp->c_cflag & CRTSCTS) {
- mr2 |= MR2_AUTOCTS;
- mr1 |= MR1_AUTORTS;
- }
-
-/*
- * All sc26198 register values calculated so go through and set
- * them all up.
- */
-
- pr_debug("SETPORT: portnr=%d panelnr=%d brdnr=%d\n",
- portp->portnr, portp->panelnr, portp->brdnr);
- pr_debug(" mr0=%x mr1=%x mr2=%x clk=%x\n", mr0, mr1, mr2, clk);
- pr_debug(" iopr=%x imron=%x imroff=%x\n", iopr, imron, imroff);
- pr_debug(" schr1=%x schr2=%x schr3=%x schr4=%x\n",
- tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP],
- tiosp->c_cc[VSTART], tiosp->c_cc[VSTOP]);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, IMR, 0);
- stl_sc26198updatereg(portp, MR0, mr0);
- stl_sc26198updatereg(portp, MR1, mr1);
- stl_sc26198setreg(portp, SCCR, CR_RXERRBLOCK);
- stl_sc26198updatereg(portp, MR2, mr2);
- stl_sc26198updatereg(portp, IOPIOR,
- ((stl_sc26198getreg(portp, IOPIOR) & ~IPR_CHANGEMASK) | iopr));
-
- if (baudrate > 0) {
- stl_sc26198setreg(portp, TXCSR, clk);
- stl_sc26198setreg(portp, RXCSR, clk);
- }
-
- stl_sc26198setreg(portp, XONCR, tiosp->c_cc[VSTART]);
- stl_sc26198setreg(portp, XOFFCR, tiosp->c_cc[VSTOP]);
-
- ipr = stl_sc26198getreg(portp, IPR);
- if (ipr & IPR_DCD)
- portp->sigs &= ~TIOCM_CD;
- else
- portp->sigs |= TIOCM_CD;
-
- portp->imr = (portp->imr & ~imroff) | imron;
- stl_sc26198setreg(portp, IMR, portp->imr);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Set the state of the DTR and RTS signals.
- */
-
-static void stl_sc26198setsignals(struct stlport *portp, int dtr, int rts)
-{
- unsigned char iopioron, iopioroff;
- unsigned long flags;
-
- pr_debug("stl_sc26198setsignals(portp=%p,dtr=%d,rts=%d)\n", portp,
- dtr, rts);
-
- iopioron = 0;
- iopioroff = 0;
- if (dtr == 0)
- iopioroff |= IPR_DTR;
- else if (dtr > 0)
- iopioron |= IPR_DTR;
- if (rts == 0)
- iopioroff |= IPR_RTS;
- else if (rts > 0)
- iopioron |= IPR_RTS;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, IOPIOR,
- ((stl_sc26198getreg(portp, IOPIOR) & ~iopioroff) | iopioron));
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Return the state of the signals.
- */
-
-static int stl_sc26198getsignals(struct stlport *portp)
-{
- unsigned char ipr;
- unsigned long flags;
- int sigs;
-
- pr_debug("stl_sc26198getsignals(portp=%p)\n", portp);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- ipr = stl_sc26198getreg(portp, IPR);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- sigs = 0;
- sigs |= (ipr & IPR_DCD) ? 0 : TIOCM_CD;
- sigs |= (ipr & IPR_CTS) ? 0 : TIOCM_CTS;
- sigs |= (ipr & IPR_DTR) ? 0: TIOCM_DTR;
- sigs |= (ipr & IPR_RTS) ? 0: TIOCM_RTS;
- sigs |= TIOCM_DSR;
- return sigs;
-}
-
-/*****************************************************************************/
-
-/*
- * Enable/Disable the Transmitter and/or Receiver.
- */
-
-static void stl_sc26198enablerxtx(struct stlport *portp, int rx, int tx)
-{
- unsigned char ccr;
- unsigned long flags;
-
- pr_debug("stl_sc26198enablerxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx,tx);
-
- ccr = portp->crenable;
- if (tx == 0)
- ccr &= ~CR_TXENABLE;
- else if (tx > 0)
- ccr |= CR_TXENABLE;
- if (rx == 0)
- ccr &= ~CR_RXENABLE;
- else if (rx > 0)
- ccr |= CR_RXENABLE;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, SCCR, ccr);
- BRDDISABLE(portp->brdnr);
- portp->crenable = ccr;
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Start/stop the Transmitter and/or Receiver.
- */
-
-static void stl_sc26198startrxtx(struct stlport *portp, int rx, int tx)
-{
- unsigned char imr;
- unsigned long flags;
-
- pr_debug("stl_sc26198startrxtx(portp=%p,rx=%d,tx=%d)\n", portp, rx, tx);
-
- imr = portp->imr;
- if (tx == 0)
- imr &= ~IR_TXRDY;
- else if (tx == 1)
- imr |= IR_TXRDY;
- if (rx == 0)
- imr &= ~(IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG);
- else if (rx > 0)
- imr |= IR_RXRDY | IR_RXBREAK | IR_RXWATCHDOG;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, IMR, imr);
- BRDDISABLE(portp->brdnr);
- portp->imr = imr;
- if (tx > 0)
- set_bit(ASYI_TXBUSY, &portp->istate);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Disable all interrupts from this port.
- */
-
-static void stl_sc26198disableintrs(struct stlport *portp)
-{
- unsigned long flags;
-
- pr_debug("stl_sc26198disableintrs(portp=%p)\n", portp);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- portp->imr = 0;
- stl_sc26198setreg(portp, IMR, 0);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-static void stl_sc26198sendbreak(struct stlport *portp, int len)
-{
- unsigned long flags;
-
- pr_debug("stl_sc26198sendbreak(portp=%p,len=%d)\n", portp, len);
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- if (len == 1) {
- stl_sc26198setreg(portp, SCCR, CR_TXSTARTBREAK);
- portp->stats.txbreaks++;
- } else
- stl_sc26198setreg(portp, SCCR, CR_TXSTOPBREAK);
-
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Take flow control actions...
- */
-
-static void stl_sc26198flowctrl(struct stlport *portp, int state)
-{
- struct tty_struct *tty;
- unsigned long flags;
- unsigned char mr0;
-
- pr_debug("stl_sc26198flowctrl(portp=%p,state=%x)\n", portp, state);
-
- if (portp == NULL)
- return;
- tty = tty_port_tty_get(&portp->port);
- if (tty == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
-
- if (state) {
- if (tty->termios->c_iflag & IXOFF) {
- mr0 = stl_sc26198getreg(portp, MR0);
- stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
- stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
- mr0 |= MR0_SWFRX;
- portp->stats.rxxon++;
- stl_sc26198wait(portp);
- stl_sc26198setreg(portp, MR0, mr0);
- }
-/*
- * Question: should we return RTS to what it was before? It may
- * have been set by an ioctl... Suppose not, since if you have
- * hardware flow control set then it is pretty silly to go and
- * set the RTS line by hand.
- */
- if (tty->termios->c_cflag & CRTSCTS) {
- stl_sc26198setreg(portp, MR1,
- (stl_sc26198getreg(portp, MR1) | MR1_AUTORTS));
- stl_sc26198setreg(portp, IOPIOR,
- (stl_sc26198getreg(portp, IOPIOR) | IOPR_RTS));
- portp->stats.rxrtson++;
- }
- } else {
- if (tty->termios->c_iflag & IXOFF) {
- mr0 = stl_sc26198getreg(portp, MR0);
- stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
- stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
- mr0 &= ~MR0_SWFRX;
- portp->stats.rxxoff++;
- stl_sc26198wait(portp);
- stl_sc26198setreg(portp, MR0, mr0);
- }
- if (tty->termios->c_cflag & CRTSCTS) {
- stl_sc26198setreg(portp, MR1,
- (stl_sc26198getreg(portp, MR1) & ~MR1_AUTORTS));
- stl_sc26198setreg(portp, IOPIOR,
- (stl_sc26198getreg(portp, IOPIOR) & ~IOPR_RTS));
- portp->stats.rxrtsoff++;
- }
- }
-
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- * Send a flow control character.
- */
-
-static void stl_sc26198sendflow(struct stlport *portp, int state)
-{
- struct tty_struct *tty;
- unsigned long flags;
- unsigned char mr0;
-
- pr_debug("stl_sc26198sendflow(portp=%p,state=%x)\n", portp, state);
-
- if (portp == NULL)
- return;
- tty = tty_port_tty_get(&portp->port);
- if (tty == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- if (state) {
- mr0 = stl_sc26198getreg(portp, MR0);
- stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
- stl_sc26198setreg(portp, SCCR, CR_TXSENDXON);
- mr0 |= MR0_SWFRX;
- portp->stats.rxxon++;
- stl_sc26198wait(portp);
- stl_sc26198setreg(portp, MR0, mr0);
- } else {
- mr0 = stl_sc26198getreg(portp, MR0);
- stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
- stl_sc26198setreg(portp, SCCR, CR_TXSENDXOFF);
- mr0 &= ~MR0_SWFRX;
- portp->stats.rxxoff++;
- stl_sc26198wait(portp);
- stl_sc26198setreg(portp, MR0, mr0);
- }
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-static void stl_sc26198flush(struct stlport *portp)
-{
- unsigned long flags;
-
- pr_debug("stl_sc26198flush(portp=%p)\n", portp);
-
- if (portp == NULL)
- return;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- stl_sc26198setreg(portp, SCCR, CR_TXRESET);
- stl_sc26198setreg(portp, SCCR, portp->crenable);
- BRDDISABLE(portp->brdnr);
- portp->tx.tail = portp->tx.head;
- spin_unlock_irqrestore(&brd_lock, flags);
-}
-
-/*****************************************************************************/
-
-/*
- * Return the current state of data flow on this port. This is only
- * really interesting when determining if data has fully completed
- * transmission or not... The sc26198 interrupt scheme cannot
- * determine when all data has actually drained, so we need to
- * check the port statusy register to be sure.
- */
-
-static int stl_sc26198datastate(struct stlport *portp)
-{
- unsigned long flags;
- unsigned char sr;
-
- pr_debug("stl_sc26198datastate(portp=%p)\n", portp);
-
- if (portp == NULL)
- return 0;
- if (test_bit(ASYI_TXBUSY, &portp->istate))
- return 1;
-
- spin_lock_irqsave(&brd_lock, flags);
- BRDENABLE(portp->brdnr, portp->pagenr);
- sr = stl_sc26198getreg(portp, SR);
- BRDDISABLE(portp->brdnr);
- spin_unlock_irqrestore(&brd_lock, flags);
-
- return (sr & SR_TXEMPTY) ? 0 : 1;
-}
-
-/*****************************************************************************/
-
-/*
- * Delay for a small amount of time, to give the sc26198 a chance
- * to process a command...
- */
-
-static void stl_sc26198wait(struct stlport *portp)
-{
- int i;
-
- pr_debug("stl_sc26198wait(portp=%p)\n", portp);
-
- if (portp == NULL)
- return;
-
- for (i = 0; i < 20; i++)
- stl_sc26198getglobreg(portp, TSTR);
-}
-
-/*****************************************************************************/
-
-/*
- * If we are TX flow controlled and in IXANY mode then we may
- * need to unflow control here. We gotta do this because of the
- * automatic flow control modes of the sc26198.
- */
-
-static void stl_sc26198txunflow(struct stlport *portp, struct tty_struct *tty)
-{
- unsigned char mr0;
-
- mr0 = stl_sc26198getreg(portp, MR0);
- stl_sc26198setreg(portp, MR0, (mr0 & ~MR0_SWFRXTX));
- stl_sc26198setreg(portp, SCCR, CR_HOSTXON);
- stl_sc26198wait(portp);
- stl_sc26198setreg(portp, MR0, mr0);
- clear_bit(ASYI_TXFLOWED, &portp->istate);
-}
-
-/*****************************************************************************/
-
-/*
- * Interrupt service routine for sc26198 panels.
- */
-
-static void stl_sc26198intr(struct stlpanel *panelp, unsigned int iobase)
-{
- struct stlport *portp;
- unsigned int iack;
-
- spin_lock(&brd_lock);
-
-/*
- * Work around bug in sc26198 chip... Cannot have A6 address
- * line of UART high, else iack will be returned as 0.
- */
- outb(0, (iobase + 1));
-
- iack = inb(iobase + XP_IACK);
- portp = panelp->ports[(iack & IVR_CHANMASK) + ((iobase & 0x4) << 1)];
-
- if (iack & IVR_RXDATA)
- stl_sc26198rxisr(portp, iack);
- else if (iack & IVR_TXDATA)
- stl_sc26198txisr(portp);
- else
- stl_sc26198otherisr(portp, iack);
-
- spin_unlock(&brd_lock);
-}
-
-/*****************************************************************************/
-
-/*
- * Transmit interrupt handler. This has gotta be fast! Handling TX
- * chars is pretty simple, stuff as many as possible from the TX buffer
- * into the sc26198 FIFO.
- * In practice it is possible that interrupts are enabled but that the
- * port has been hung up. Need to handle not having any TX buffer here,
- * this is done by using the side effect that head and tail will also
- * be NULL if the buffer has been freed.
- */
-
-static void stl_sc26198txisr(struct stlport *portp)
-{
- struct tty_struct *tty;
- unsigned int ioaddr;
- unsigned char mr0;
- int len, stlen;
- char *head, *tail;
-
- pr_debug("stl_sc26198txisr(portp=%p)\n", portp);
-
- ioaddr = portp->ioaddr;
- head = portp->tx.head;
- tail = portp->tx.tail;
- len = (head >= tail) ? (head - tail) : (STL_TXBUFSIZE - (tail - head));
- if ((len == 0) || ((len < STL_TXBUFLOW) &&
- (test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
- set_bit(ASYI_TXLOW, &portp->istate);
- tty = tty_port_tty_get(&portp->port);
- if (tty) {
- tty_wakeup(tty);
- tty_kref_put(tty);
- }
- }
-
- if (len == 0) {
- outb((MR0 | portp->uartaddr), (ioaddr + XP_ADDR));
- mr0 = inb(ioaddr + XP_DATA);
- if ((mr0 & MR0_TXMASK) == MR0_TXEMPTY) {
- portp->imr &= ~IR_TXRDY;
- outb((IMR | portp->uartaddr), (ioaddr + XP_ADDR));
- outb(portp->imr, (ioaddr + XP_DATA));
- clear_bit(ASYI_TXBUSY, &portp->istate);
- } else {
- mr0 |= ((mr0 & ~MR0_TXMASK) | MR0_TXEMPTY);
- outb(mr0, (ioaddr + XP_DATA));
- }
- } else {
- len = min(len, SC26198_TXFIFOSIZE);
- portp->stats.txtotal += len;
- stlen = min_t(unsigned int, len,
- (portp->tx.buf + STL_TXBUFSIZE) - tail);
- outb(GTXFIFO, (ioaddr + XP_ADDR));
- outsb((ioaddr + XP_DATA), tail, stlen);
- len -= stlen;
- tail += stlen;
- if (tail >= (portp->tx.buf + STL_TXBUFSIZE))
- tail = portp->tx.buf;
- if (len > 0) {
- outsb((ioaddr + XP_DATA), tail, len);
- tail += len;
- }
- portp->tx.tail = tail;
- }
-}
-
-/*****************************************************************************/
-
-/*
- * Receive character interrupt handler. Determine if we have good chars
- * or bad chars and then process appropriately. Good chars are easy
- * just shove the lot into the RX buffer and set all status byte to 0.
- * If a bad RX char then process as required. This routine needs to be
- * fast! In practice it is possible that we get an interrupt on a port
- * that is closed. This can happen on hangups - since they completely
- * shutdown a port not in user context. Need to handle this case.
- */
-
-static void stl_sc26198rxisr(struct stlport *portp, unsigned int iack)
-{
- struct tty_struct *tty;
- unsigned int len, buflen, ioaddr;
-
- pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
-
- tty = tty_port_tty_get(&portp->port);
- ioaddr = portp->ioaddr;
- outb(GIBCR, (ioaddr + XP_ADDR));
- len = inb(ioaddr + XP_DATA) + 1;
-
- if ((iack & IVR_TYPEMASK) == IVR_RXDATA) {
- if (tty == NULL || (buflen = tty_buffer_request_room(tty, len)) == 0) {
- len = min_t(unsigned int, len, sizeof(stl_unwanted));
- outb(GRXFIFO, (ioaddr + XP_ADDR));
- insb((ioaddr + XP_DATA), &stl_unwanted[0], len);
- portp->stats.rxlost += len;
- portp->stats.rxtotal += len;
- } else {
- len = min(len, buflen);
- if (len > 0) {
- unsigned char *ptr;
- outb(GRXFIFO, (ioaddr + XP_ADDR));
- tty_prepare_flip_string(tty, &ptr, len);
- insb((ioaddr + XP_DATA), ptr, len);
- tty_schedule_flip(tty);
- portp->stats.rxtotal += len;
- }
- }
- } else {
- stl_sc26198rxbadchars(portp);
- }
-
-/*
- * If we are TX flow controlled and in IXANY mode then we may need
- * to unflow control here. We gotta do this because of the automatic
- * flow control modes of the sc26198.
- */
- if (test_bit(ASYI_TXFLOWED, &portp->istate)) {
- if ((tty != NULL) &&
- (tty->termios != NULL) &&
- (tty->termios->c_iflag & IXANY)) {
- stl_sc26198txunflow(portp, tty);
- }
- }
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- * Process an RX bad character.
- */
-
-static void stl_sc26198rxbadch(struct stlport *portp, unsigned char status, char ch)
-{
- struct tty_struct *tty;
- unsigned int ioaddr;
-
- tty = tty_port_tty_get(&portp->port);
- ioaddr = portp->ioaddr;
-
- if (status & SR_RXPARITY)
- portp->stats.rxparity++;
- if (status & SR_RXFRAMING)
- portp->stats.rxframing++;
- if (status & SR_RXOVERRUN)
- portp->stats.rxoverrun++;
- if (status & SR_RXBREAK)
- portp->stats.rxbreaks++;
-
- if ((tty != NULL) &&
- ((portp->rxignoremsk & status) == 0)) {
- if (portp->rxmarkmsk & status) {
- if (status & SR_RXBREAK) {
- status = TTY_BREAK;
- if (portp->port.flags & ASYNC_SAK) {
- do_SAK(tty);
- BRDENABLE(portp->brdnr, portp->pagenr);
- }
- } else if (status & SR_RXPARITY)
- status = TTY_PARITY;
- else if (status & SR_RXFRAMING)
- status = TTY_FRAME;
- else if(status & SR_RXOVERRUN)
- status = TTY_OVERRUN;
- else
- status = 0;
- } else
- status = 0;
-
- tty_insert_flip_char(tty, ch, status);
- tty_schedule_flip(tty);
-
- if (status == 0)
- portp->stats.rxtotal++;
- }
- tty_kref_put(tty);
-}
-
-/*****************************************************************************/
-
-/*
- * Process all characters in the RX FIFO of the UART. Check all char
- * status bytes as well, and process as required. We need to check
- * all bytes in the FIFO, in case some more enter the FIFO while we
- * are here. To get the exact character error type we need to switch
- * into CHAR error mode (that is why we need to make sure we empty
- * the FIFO).
- */
-
-static void stl_sc26198rxbadchars(struct stlport *portp)
-{
- unsigned char status, mr1;
- char ch;
-
-/*
- * To get the precise error type for each character we must switch
- * back into CHAR error mode.
- */
- mr1 = stl_sc26198getreg(portp, MR1);
- stl_sc26198setreg(portp, MR1, (mr1 & ~MR1_ERRBLOCK));
-
- while ((status = stl_sc26198getreg(portp, SR)) & SR_RXRDY) {
- stl_sc26198setreg(portp, SCCR, CR_CLEARRXERR);
- ch = stl_sc26198getreg(portp, RXFIFO);
- stl_sc26198rxbadch(portp, status, ch);
- }
-
-/*
- * To get correct interrupt class we must switch back into BLOCK
- * error mode.
- */
- stl_sc26198setreg(portp, MR1, mr1);
-}
-
-/*****************************************************************************/
-
-/*
- * Other interrupt handler. This includes modem signals, flow
- * control actions, etc. Most stuff is left to off-level interrupt
- * processing time.
- */
-
-static void stl_sc26198otherisr(struct stlport *portp, unsigned int iack)
-{
- unsigned char cir, ipr, xisr;
-
- pr_debug("stl_sc26198otherisr(portp=%p,iack=%x)\n", portp, iack);
-
- cir = stl_sc26198getglobreg(portp, CIR);
-
- switch (cir & CIR_SUBTYPEMASK) {
- case CIR_SUBCOS:
- ipr = stl_sc26198getreg(portp, IPR);
- if (ipr & IPR_DCDCHANGE) {
- stl_cd_change(portp);
- portp->stats.modem++;
- }
- break;
- case CIR_SUBXONXOFF:
- xisr = stl_sc26198getreg(portp, XISR);
- if (xisr & XISR_RXXONGOT) {
- set_bit(ASYI_TXFLOWED, &portp->istate);
- portp->stats.txxoff++;
- }
- if (xisr & XISR_RXXOFFGOT) {
- clear_bit(ASYI_TXFLOWED, &portp->istate);
- portp->stats.txxon++;
- }
- break;
- case CIR_SUBBREAK:
- stl_sc26198setreg(portp, SCCR, CR_BREAKRESET);
- stl_sc26198rxbadchars(portp);
- break;
- default:
- break;
- }
-}
-
-static void stl_free_isabrds(void)
-{
- struct stlbrd *brdp;
- unsigned int i;
-
- for (i = 0; i < stl_nrbrds; i++) {
- if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
- continue;
-
- free_irq(brdp->irq, brdp);
-
- stl_cleanup_panels(brdp);
-
- release_region(brdp->ioaddr1, brdp->iosize1);
- if (brdp->iosize2 > 0)
- release_region(brdp->ioaddr2, brdp->iosize2);
-
- kfree(brdp);
- stl_brds[i] = NULL;
- }
-}
-
-/*
- * Loadable module initialization stuff.
- */
-static int __init stallion_module_init(void)
-{
- struct stlbrd *brdp;
- struct stlconf conf;
- unsigned int i, j;
- int retval;
-
- printk(KERN_INFO "%s: version %s\n", stl_drvtitle, stl_drvversion);
-
- spin_lock_init(&stallion_lock);
- spin_lock_init(&brd_lock);
-
- stl_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
- if (!stl_serial) {
- retval = -ENOMEM;
- goto err;
- }
-
- stl_serial->owner = THIS_MODULE;
- stl_serial->driver_name = stl_drvname;
- stl_serial->name = "ttyE";
- stl_serial->major = STL_SERIALMAJOR;
- stl_serial->minor_start = 0;
- stl_serial->type = TTY_DRIVER_TYPE_SERIAL;
- stl_serial->subtype = SERIAL_TYPE_NORMAL;
- stl_serial->init_termios = stl_deftermios;
- stl_serial->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(stl_serial, &stl_ops);
-
- retval = tty_register_driver(stl_serial);
- if (retval) {
- printk("STALLION: failed to register serial driver\n");
- goto err_frtty;
- }
-
-/*
- * Find any dynamically supported boards. That is via module load
- * line options.
- */
- for (i = stl_nrbrds; i < stl_nargs; i++) {
- memset(&conf, 0, sizeof(conf));
- if (stl_parsebrd(&conf, stl_brdsp[i]) == 0)
- continue;
- if ((brdp = stl_allocbrd()) == NULL)
- continue;
- brdp->brdnr = i;
- brdp->brdtype = conf.brdtype;
- brdp->ioaddr1 = conf.ioaddr1;
- brdp->ioaddr2 = conf.ioaddr2;
- brdp->irq = conf.irq;
- brdp->irqtype = conf.irqtype;
- stl_brds[brdp->brdnr] = brdp;
- if (stl_brdinit(brdp)) {
- stl_brds[brdp->brdnr] = NULL;
- kfree(brdp);
- } else {
- for (j = 0; j < brdp->nrports; j++)
- tty_register_device(stl_serial,
- brdp->brdnr * STL_MAXPORTS + j, NULL);
- stl_nrbrds = i + 1;
- }
- }
-
- /* this has to be _after_ isa finding because of locking */
- retval = pci_register_driver(&stl_pcidriver);
- if (retval && stl_nrbrds == 0) {
- printk(KERN_ERR "STALLION: can't register pci driver\n");
- goto err_unrtty;
- }
-
-/*
- * Set up a character driver for per board stuff. This is mainly used
- * to do stats ioctls on the ports.
- */
- if (register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stl_fsiomem))
- printk("STALLION: failed to register serial board device\n");
-
- stallion_class = class_create(THIS_MODULE, "staliomem");
- if (IS_ERR(stallion_class))
- printk("STALLION: failed to create class\n");
- for (i = 0; i < 4; i++)
- device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
- NULL, "staliomem%d", i);
-
- return 0;
-err_unrtty:
- tty_unregister_driver(stl_serial);
-err_frtty:
- put_tty_driver(stl_serial);
-err:
- return retval;
-}
-
-static void __exit stallion_module_exit(void)
-{
- struct stlbrd *brdp;
- unsigned int i, j;
-
- pr_debug("cleanup_module()\n");
-
- printk(KERN_INFO "Unloading %s: version %s\n", stl_drvtitle,
- stl_drvversion);
-
-/*
- * Free up all allocated resources used by the ports. This includes
- * memory and interrupts. As part of this process we will also do
- * a hangup on every open port - to try to flush out any processes
- * hanging onto ports.
- */
- for (i = 0; i < stl_nrbrds; i++) {
- if ((brdp = stl_brds[i]) == NULL || (brdp->state & STL_PROBED))
- continue;
- for (j = 0; j < brdp->nrports; j++)
- tty_unregister_device(stl_serial,
- brdp->brdnr * STL_MAXPORTS + j);
- }
-
- for (i = 0; i < 4; i++)
- device_destroy(stallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- unregister_chrdev(STL_SIOMEMMAJOR, "staliomem");
- class_destroy(stallion_class);
-
- pci_unregister_driver(&stl_pcidriver);
-
- stl_free_isabrds();
-
- tty_unregister_driver(stl_serial);
- put_tty_driver(stl_serial);
-}
-
-module_init(stallion_module_init);
-module_exit(stallion_module_exit);
-
-MODULE_AUTHOR("Greg Ungerer");
-MODULE_DESCRIPTION("Stallion Multiport Serial Driver");
-MODULE_LICENSE("GPL");