diff options
author | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-30 22:57:33 -0300 |
---|---|---|
committer | Lucas De Marchi <lucas.demarchi@profusion.mobi> | 2011-03-31 11:26:23 -0300 |
commit | 25985edcedea6396277003854657b5f3cb31a628 (patch) | |
tree | f026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/hwmon | |
parent | 6aba74f2791287ec407e0f92487a725a25908067 (diff) | |
download | kernel_samsung_smdk4412-25985edcedea6396277003854657b5f3cb31a628.zip kernel_samsung_smdk4412-25985edcedea6396277003854657b5f3cb31a628.tar.gz kernel_samsung_smdk4412-25985edcedea6396277003854657b5f3cb31a628.tar.bz2 |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/abituguru.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/abituguru3.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/adm1026.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/lm85.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/lm90.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/sht15.c | 6 | ||||
-rw-r--r-- | drivers/hwmon/tmp102.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/w83791d.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/w83792d.c | 2 | ||||
-rw-r--r-- | drivers/hwmon/w83793.c | 2 |
10 files changed, 12 insertions, 12 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index 0e05aa1..e7d4c46 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1422,7 +1422,7 @@ static int __init abituguru_detect(void) at DATA and 0xAC, when this driver has already been loaded once DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either scenario but some will hold 0x00. - Some uGuru's initally hold 0x09 at DATA and will only hold 0x08 + Some uGuru's initially hold 0x09 at DATA and will only hold 0x08 after reading CMD first, so CMD must be read first! */ u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD); u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA); diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 034cebf..e89d572 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -151,7 +151,7 @@ struct abituguru3_data { /* Pointer to the sensors info for the detected motherboard */ const struct abituguru3_sensor_info *sensors; - /* The abituguru3 supports upto 48 sensors, and thus has registers + /* The abituguru3 supports up to 48 sensors, and thus has registers sets for 48 sensors, for convienence reasons / simplicity of the code we always read and store all registers for all 48 sensors */ diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index be0fdd5..0531867 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -175,7 +175,7 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f }; * these macros are called: arguments may be evaluated more than once. */ -/* IN are scaled acording to built-in resistors. These are the +/* IN are scaled according to built-in resistors. These are the * voltages corresponding to 3/4 of full scale (192 or 0xc0) * NOTE: The -12V input needs an additional factor to account * for the Vref pullup resistor. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index cf47e6e..250d099 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -130,7 +130,7 @@ enum chips { these macros are called: arguments may be evaluated more than once. */ -/* IN are scaled acording to built-in resistors */ +/* IN are scaled according to built-in resistors */ static const int lm85_scaling[] = { /* .001 Volts */ 2500, 2250, 3300, 5000, 12000, 3300, 1500, 1800 /*EMC6D100*/ diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 812781c..c43b4e9 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -356,7 +356,7 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value) /* * There is a trick here. We have to read two registers to have the * sensor temperature, but we have to beware a conversion could occur - * inbetween the readings. The datasheet says we should either use + * between the readings. The datasheet says we should either use * the one-shot conversion register, which we don't want to do * (disables hardware monitoring) or monitor the busy bit, which is * impossible (we can't read the values and monitor that bit at the diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index 1a9c32d..f4e617a 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -52,7 +52,7 @@ #define SHT15_TSU 150 /* data setup time */ /** - * struct sht15_temppair - elements of voltage dependant temp calc + * struct sht15_temppair - elements of voltage dependent temp calc * @vdd: supply voltage in microvolts * @d1: see data sheet */ @@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data, enable_irq(gpio_to_irq(data->pdata->gpio_data)); if (gpio_get_value(data->pdata->gpio_data) == 0) { disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data)); - /* Only relevant if the interrupt hasn't occured. */ + /* Only relevant if the interrupt hasn't occurred. */ if (!atomic_read(&data->interrupt_handled)) schedule_work(&data->read_work); } @@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s) */ atomic_set(&data->interrupt_handled, 0); enable_irq(gpio_to_irq(data->pdata->gpio_data)); - /* If still not occured or another handler has been scheduled */ + /* If still not occurred or another handler has been scheduled */ if (gpio_get_value(data->pdata->gpio_data) || atomic_read(&data->interrupt_handled)) return; diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c index 93187c3..5bd1949 100644 --- a/drivers/hwmon/tmp102.c +++ b/drivers/hwmon/tmp102.c @@ -166,7 +166,7 @@ static int __devinit tmp102_probe(struct i2c_client *client, if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) { - dev_err(&client->dev, "adapter doesnt support SMBus word " + dev_err(&client->dev, "adapter doesn't support SMBus word " "transactions\n"); return -ENODEV; } diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 400a88b..17cf1ab 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, /* Note: we save and restore the fan minimum here, because its value is determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just + least surprise; the user doesn't expect the fan minimum to change just because the divisor changed. */ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 63841f8..f3e7130 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -244,7 +244,7 @@ FAN_TO_REG(long rpm, int div) #define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ : (val)) / 1000, 0, 0xff)) #define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) -/* for temp2 and temp3, because they need addtional resolution */ +/* for temp2 and temp3, because they need additional resolution */ #define TEMP_ADD_FROM_REG(val1, val2) \ ((((val1) & 0x80 ? (val1)-0x100 \ : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0)) diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index e3bdedf..854f911 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -1921,7 +1921,7 @@ static void w83793_update_nonvolatile(struct device *dev) struct w83793_data *data = i2c_get_clientdata(client); int i, j; /* - They are somewhat "stable" registers, and to update them everytime + They are somewhat "stable" registers, and to update them every time takes so much time, it's just not worthy. Update them in a long interval to avoid exception. */ |