aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorJean Delvare <khali@linux-fr.org>2011-05-25 20:43:33 +0200
committerJean Delvare <khali@endymion.delvare>2011-05-25 20:43:33 +0200
commitec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9 (patch)
tree6f261c6f8a23fdd604f6a7b2f31cac906b0533ea /drivers/hwmon
parent5b0380c94a2e888b7858fbec6fc3ac623bc9b05a (diff)
downloadkernel_samsung_smdk4412-ec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9.zip
kernel_samsung_smdk4412-ec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9.tar.gz
kernel_samsung_smdk4412-ec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9.tar.bz2
hwmon: (abituguru) Depend on DMI
The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/abituguru.c3
-rw-r--r--drivers/hwmon/abituguru3.c13
3 files changed, 2 insertions, 18 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 12bfc07..9004096 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -41,7 +41,7 @@ comment "Native drivers"
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && DMI && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the first
and second revision of the Abit uGuru chip. The voltage and frequency
@@ -56,7 +56,7 @@ config SENSORS_ABITUGURU
config SENSORS_ABITUGURU3
tristate "Abit uGuru (rev 3)"
- depends on X86 && EXPERIMENTAL
+ depends on X86 && DMI && EXPERIMENTAL
help
If you say yes here you get support for the sensor part of the
third revision of the Abit uGuru chip. Only reading the sensors
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index e7d4c46..65a35cf 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -1448,15 +1448,12 @@ static int __init abituguru_init(void)
{
int address, err;
struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
/* safety check, refuse to load on non Abit motherboards */
if (!force && (!board_vendor ||
strcmp(board_vendor, "http://www.abit.com.tw/")))
return -ENODEV;
-#endif
address = abituguru_detect();
if (address < 0)
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index e89d572..d30855a 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1119,8 +1119,6 @@ static struct platform_driver abituguru3_driver = {
.resume = abituguru3_resume
};
-#ifdef CONFIG_DMI
-
static int __init abituguru3_dmi_detect(void)
{
const char *board_vendor, *board_name;
@@ -1159,15 +1157,6 @@ static int __init abituguru3_dmi_detect(void)
return 1;
}
-#else /* !CONFIG_DMI */
-
-static inline int abituguru3_dmi_detect(void)
-{
- return 1;
-}
-
-#endif /* CONFIG_DMI */
-
/* FIXME: Manual detection should die eventually; we need to collect stable
* DMI model names first before we can rely entirely on CONFIG_DMI.
*/
@@ -1216,10 +1205,8 @@ static int __init abituguru3_init(void)
if (err)
return err;
-#ifdef CONFIG_DMI
pr_warn("this motherboard was not detected using DMI. "
"Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n");
-#endif
}
err = platform_driver_register(&abituguru3_driver);