i2c/isp1301_omap: Build fixes, whitespace

Build fixes for isp1301_omap driver.  I think an earlier version
of this must have gotten lost somewhere, or maybe it only went
into the Linux-OMAP tree.

Also, some whitespace fixes to bring this more into sync with the
version of this found in the Linux-OMAP tree.  (That version has
updates for the OTG controller on the OMAP 1710 which break that
functionality on OMAP 161x boards like the H2, so merging all of
it is not currently an option.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 21 insertions, 21 deletions

diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 9fafadb..fe04e46 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -18,8 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#undef	DEBUG
-#undef	VERBOSE
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -44,7 +42,7 @@
 
 
 #define	DRIVER_VERSION	"24 August 2004"
-#define	DRIVER_NAME	(isp1301_driver.name)
+#define	DRIVER_NAME	(isp1301_driver.driver.name)
 
 MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
 MODULE_LICENSE("GPL");
@@ -55,6 +53,7 @@ struct isp1301 {
 	void			(*i2c_release)(struct device *dev);
 
 	int			irq;
+	int			irq_type;
 
 	u32			last_otg_ctrl;
 	unsigned		working:1;
@@ -63,7 +62,7 @@ struct isp1301 {
 
 	/* use keventd context to change the state for us */
 	struct work_struct	work;
-	
+
 	unsigned long		todo;
 #		define WORK_UPDATE_ISP	0	/* update ISP from OTG */
 #		define WORK_UPDATE_OTG	1	/* update OTG from ISP */
@@ -94,7 +93,7 @@ struct isp1301 {
 
 /* board-specific PM hooks */
 
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/mach-types.h>
 
@@ -291,7 +290,7 @@ static void power_up(struct isp1301 *isp)
 {
 	// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
 	isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
-	
+
 	/* do this only when cpu is driving transceiver,
 	 * so host won't see a low speed device...
 	 */
@@ -799,7 +798,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
 		/* role is host */
 		} else {
 			if (!(otg_ctrl & OTG_ID)) {
-		 		otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+				otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
 				OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ;
 			}
 
@@ -1100,9 +1099,9 @@ static u8 isp1301_clear_latch(struct isp1301 *isp)
 }
 
 static void
-isp1301_work(void *data)
+isp1301_work(struct work_struct *work)
 {
-	struct isp1301	*isp = data;
+	struct isp1301	*isp = container_of(work, struct isp1301, work);
 	int		stop;
 
 	/* implicit lock:  we're the only task using this device */
@@ -1244,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
  *  - DEVICE mode, for when there's a B/Mini-B (device) connector
  *
  * As a rule, you won't have an isp1301 chip unless it's there to
- * support the OTG mode.  Other modes help testing USB controllers 
+ * support the OTG mode.  Other modes help testing USB controllers
  * in isolation from (full) OTG support, or maybe so later board
  * revisions can help to support those feature.
  */
@@ -1260,9 +1259,9 @@ static int isp1301_otg_enable(struct isp1301 *isp)
 	 * a few more interrupts than are strictly needed.
 	 */
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-	 	INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-	 	INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+		INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
 
 	dev_info(&isp->client.dev, "ready for dual-role USB ...\n");
 
@@ -1306,9 +1305,9 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
 
 	dev_info(&isp->client.dev, "A-Host sessions ok\n");
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-	 	INTR_ID_GND);
+		INTR_ID_GND);
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-	 	INTR_ID_GND);
+		INTR_ID_GND);
 
 	/* If this has a Mini-AB connector, this mode is highly
 	 * nonstandard ... but can be handy for testing, especially with
@@ -1368,9 +1367,9 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
 		isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
 
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
-	 	INTR_SESS_VLD);
+		INTR_SESS_VLD);
 	isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
-	 	INTR_VBUS_VLD);
+		INTR_VBUS_VLD);
 	dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
 	dump_regs(isp, __FUNCTION__);
 
@@ -1494,7 +1493,7 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
 	if (!isp)
 		return 0;
 
-	INIT_WORK(&isp->work, isp1301_work, isp);
+	INIT_WORK(&isp->work, isp1301_work);
 	init_timer(&isp->timer);
 	isp->timer.function = isp1301_timer;
 	isp->timer.data = (unsigned long) isp;
@@ -1572,13 +1571,14 @@ fail1:
 		/* IRQ wired at M14 */
 		omap_cfg_reg(M14_1510_GPIO2);
 		isp->irq = OMAP_GPIO_IRQ(2);
-		omap_request_gpio(2);
-		omap_set_gpio_direction(2, 1);
-		omap_set_gpio_edge_ctrl(2, OMAP_GPIO_FALLING_EDGE);
+		if (gpio_request(2, "isp1301") == 0)
+			gpio_direction_input(2);
+		isp->irq_type = IRQF_TRIGGER_FALLING;
 	}
 
+	isp->irq_type |= IRQF_SAMPLE_RANDOM;
 	status = request_irq(isp->irq, isp1301_irq,
-			IRQF_SAMPLE_RANDOM, DRIVER_NAME, isp);
+			isp->irq_type, DRIVER_NAME, isp);
 	if (status < 0) {
 		dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
 				isp->irq, status);