diff options
author | NeilBrown <neilb@suse.de> | 2009-01-09 08:31:11 +1100 |
---|---|---|
committer | NeilBrown <neilb@suse.de> | 2009-01-09 08:31:11 +1100 |
commit | 4044ba58dd15cb01797c4fd034f39ef4a75f7cc3 (patch) | |
tree | e1bea8143538fc3eaeeb8578c2f9231e32809a25 /drivers/md | |
parent | efeb53c0e57213e843b7ef3cc6ebcdea7d6186ac (diff) | |
download | kernel_samsung_smdk4412-4044ba58dd15cb01797c4fd034f39ef4a75f7cc3.zip kernel_samsung_smdk4412-4044ba58dd15cb01797c4fd034f39ef4a75f7cc3.tar.gz kernel_samsung_smdk4412-4044ba58dd15cb01797c4fd034f39ef4a75f7cc3.tar.bz2 |
md: don't retry recovery of raid1 that fails due to error on source drive.
If a raid1 has only one working drive and it has a sector which
gives an error on read, then an attempt to recover onto a spare will
fail, but as the single remaining drive is not removed from the
array, the recovery will be immediately re-attempted, resulting
in an infinite recovery loop.
So detect this situation and don't retry recovery once an error
on the lone remaining drive is detected.
Allow recovery to be retried once every time a spare is added
in case the problem wasn't actually a media error.
Signed-off-by: NeilBrown <neilb@suse.de>
Diffstat (limited to 'drivers/md')
-rw-r--r-- | drivers/md/md.c | 5 | ||||
-rw-r--r-- | drivers/md/raid1.c | 8 |
2 files changed, 10 insertions, 3 deletions
diff --git a/drivers/md/md.c b/drivers/md/md.c index f5cbb9d..41e2509 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1500,6 +1500,9 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) list_add_rcu(&rdev->same_set, &mddev->disks); bd_claim_by_disk(rdev->bdev, rdev->bdev->bd_holder, mddev->gendisk); + + /* May as well allow recovery to be retried once */ + mddev->recovery_disabled = 0; return 0; fail: @@ -6175,7 +6178,7 @@ static int remove_and_add_spares(mddev_t *mddev) } } - if (mddev->degraded && ! mddev->ro) { + if (mddev->degraded && ! mddev->ro && !mddev->recovery_disabled) { list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index c165b1e..7b4f5f7 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1016,12 +1016,16 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) * else mark the drive as failed */ if (test_bit(In_sync, &rdev->flags) - && (conf->raid_disks - mddev->degraded) == 1) + && (conf->raid_disks - mddev->degraded) == 1) { /* * Don't fail the drive, act as though we were just a - * normal single drive + * normal single drive. + * However don't try a recovery from this drive as + * it is very likely to fail. */ + mddev->recovery_disabled = 1; return; + } if (test_and_clear_bit(In_sync, &rdev->flags)) { unsigned long flags; spin_lock_irqsave(&conf->device_lock, flags); |