V4L/DVB (3318b): sem2mutex: drivers/media/, #2

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 17 insertions, 15 deletions

diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 5a13c47..ecb15d4 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -19,7 +19,7 @@
 #include <linux/time.h>
 #include <linux/errno.h>
 #include <linux/jiffies.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 
 #include "dvb_frontend.h"
 #include "dmxdev.h"
@@ -35,7 +35,6 @@
 #include <linux/dvb/dmx.h>
 #include <linux/pci.h>
 
-
 /*
   TTUSB_HWSECTIONS:
     the DSP supports filtering in hardware, however, since the "muxstream"
@@ -83,8 +82,8 @@ struct ttusb {
 	struct dvb_net dvbnet;
 
 	/* and one for USB access. */
-	struct semaphore semi2c;
-	struct semaphore semusb;
+	struct mutex semi2c;
+	struct mutex semusb;
 
 	struct dvb_adapter adapter;
 	struct usb_device *dev;
@@ -150,7 +149,7 @@ static int ttusb_cmd(struct ttusb *ttusb,
 	printk("\n");
 #endif
 
-	if (down_interruptible(&ttusb->semusb) < 0)
+	if (mutex_lock_interruptible(&ttusb->semusb) < 0)
 		return -EAGAIN;
 
 	err = usb_bulk_msg(ttusb->dev, ttusb->bulk_out_pipe,
@@ -158,13 +157,13 @@ static int ttusb_cmd(struct ttusb *ttusb,
 	if (err != 0) {
 		dprintk("%s: usb_bulk_msg(send) failed, err == %i!\n",
 			__FUNCTION__, err);
-		up(&ttusb->semusb);
+		mutex_unlock(&ttusb->semusb);
 		return err;
 	}
 	if (actual_len != len) {
 		dprintk("%s: only wrote %d of %d bytes\n", __FUNCTION__,
 			actual_len, len);
-		up(&ttusb->semusb);
+		mutex_unlock(&ttusb->semusb);
 		return -1;
 	}
 
@@ -174,7 +173,7 @@ static int ttusb_cmd(struct ttusb *ttusb,
 	if (err != 0) {
 		printk("%s: failed, receive error %d\n", __FUNCTION__,
 		       err);
-		up(&ttusb->semusb);
+		mutex_unlock(&ttusb->semusb);
 		return err;
 	}
 #if DEBUG >= 3
@@ -185,14 +184,14 @@ static int ttusb_cmd(struct ttusb *ttusb,
 	printk("\n");
 #endif
 	if (!needresult)
-		up(&ttusb->semusb);
+		mutex_unlock(&ttusb->semusb);
 	return 0;
 }
 
 static int ttusb_result(struct ttusb *ttusb, u8 * data, int len)
 {
 	memcpy(data, ttusb->last_result, len);
-	up(&ttusb->semusb);
+	mutex_unlock(&ttusb->semusb);
 	return 0;
 }
 
@@ -250,7 +249,7 @@ static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num
 	int i = 0;
 	int inc;
 
-	if (down_interruptible(&ttusb->semi2c) < 0)
+	if (mutex_lock_interruptible(&ttusb->semi2c) < 0)
 		return -EAGAIN;
 
 	while (i < num) {
@@ -284,7 +283,7 @@ static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num
 		i += inc;
 	}
 
-	up(&ttusb->semi2c);
+	mutex_unlock(&ttusb->semi2c);
 	return i;
 }
 
@@ -1495,8 +1494,11 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 	ttusb->dev = udev;
 	ttusb->c = 0;
 	ttusb->mux_state = 0;
-	sema_init(&ttusb->semi2c, 0);
-	sema_init(&ttusb->semusb, 1);
+	mutex_init(&ttusb->semi2c);
+
+	mutex_lock(&ttusb->semi2c);
+
+	mutex_init(&ttusb->semusb);
 
 	ttusb_setup_interfaces(ttusb);
 
@@ -1504,7 +1506,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 	if (ttusb_init_controller(ttusb))
 		printk("ttusb_init_controller: error\n");
 
-	up(&ttusb->semi2c);
+	mutex_unlock(&ttusb->semi2c);
 
 	dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
 	ttusb->adapter.priv = ttusb;