diff options
| author | Michael Chan <mchan@broadcom.com> | 2005-08-09 20:17:14 -0700 |
|---|---|---|
| committer | David S. Miller <davem@sunset.davemloft.net> | 2005-08-29 15:50:42 -0700 |
| commit | 6892914fb7980d844f2bac859f4095df9ebd18da (patch) | |
| tree | ddeb1904b798bb69ed248840f25477bf8891d250 /drivers/net/tg3.h | |
| parent | 09ee929cccfd0b56ea3724b3c6299fbbe813df43 (diff) | |
| download | kernel_samsung_smdk4412-6892914fb7980d844f2bac859f4095df9ebd18da.zip kernel_samsung_smdk4412-6892914fb7980d844f2bac859f4095df9ebd18da.tar.gz kernel_samsung_smdk4412-6892914fb7980d844f2bac859f4095df9ebd18da.tar.bz2 | |
[TG3]: Add indirect register method for 5703 behind ICH
This patch adds the new workaround for 5703 A1/A2 if it is behind
certain ICH bridges. The workaround disables memory and uses config.
cycles only to access all registers. The 5702/03 chips can mistakenly
decode the special cycles from the ICH chipsets as memory write cycles,
causing corruption of register and memory space. Only certain ICH
bridges will drive special cycles with non-zero data during the address
phase which can fall within the 5703's address range. This is not an ICH
bug as the PCI spec allows non-zero address during special cycles.
However, only these ICH bridges are known to drive non-zero addresses
during special cycles.
The indirect_lock is also changed to spin_lock_irqsave from spin_lock_bh
because it is used in irq handler when using the indirect method to
disable interrupts.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tg3.h')
| -rw-r--r-- | drivers/net/tg3.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index c398b84..c184b77 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2174,6 +2174,7 @@ struct tg3 { #define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \ TG3_FLG2_MII_SERDES) #define TG3_FLG2_PARALLEL_DETECT 0x01000000 +#define TG3_FLG2_ICH_WORKAROUND 0x02000000 u32 split_mode_max_reqs; #define SPLIT_MODE_5704_MAX_REQ 3 |