Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (110 commits)
  [SCSI] qla2xxx: Refactor call to qla2xxx_read_sfp for thermal temperature.
  [SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.
  [SCSI] qla2xxx: Clear complete initialization control block.
  [SCSI] qla2xxx: Allow an override of the registered maximum LUN.
  [SCSI] qla2xxx: Add host number in reset and quiescent message logs.
  [SCSI] qla2xxx: Correctly read sfp single byte mailbox register.
  [SCSI] qla2xxx: Add qla82xx_rom_unlock() function.
  [SCSI] qla2xxx: Log if qla82xx firmware fails to load from flash.
  [SCSI] qla2xxx: Use passed in host to initialize local scsi_qla_host in queuecommand function
  [SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.
  [SCSI] qla2xxx: Update firmware version after flash update for ISP82xx.
  [SCSI] qla2xxx: Fix hang during driver unload when vport is active.
  [SCSI] qla2xxx: Properly set the dsd_list_len for dsd_chaining in cmd type 6.
  [SCSI] qla2xxx: Fix virtual port failing to login after chip reset.
  [SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.
  [SCSI] hpsa: Change memset using sizeof(ptr) to sizeof(*ptr)
  [SCSI] ipr: Rate limit DMA mapping errors
  [SCSI] hpsa: add P2000 to list of shared SAS devices
  [SCSI] hpsa: do not attempt PCI power management reset method if we know it won't work.
  [SCSI] hpsa: remove superfluous sleeps around reset code
  ...

1 files changed, 8 insertions, 11 deletions

diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 4a9641e..d5f8362 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -372,8 +372,7 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 	cp->status = USED;	/* claim free slot */
 
 	DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
-		"eata_pio_queue pid %ld, y %d\n",
-		cmd->serial_number, y));
+		"eata_pio_queue 0x%p, y %d\n", cmd, y));
 
 	cmd->scsi_done = (void *) done;
 
@@ -417,8 +416,8 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 	if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
 		cmd->result = DID_BUS_BUSY << 16;
 		scmd_printk(KERN_NOTICE, cmd,
-			"eata_pio_queue pid %ld, HBA busy, "
-			"returning DID_BUS_BUSY, done.\n", cmd->serial_number);
+			"eata_pio_queue pid 0x%p, HBA busy, "
+			"returning DID_BUS_BUSY, done.\n", cmd);
 		done(cmd);
 		cp->status = FREE;
 		return 0;
@@ -432,8 +431,8 @@ static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 		outw(0, base + HA_RDATA);
 
 	DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
-		"Queued base %#.4lx pid: %ld "
-		"slot %d irq %d\n", sh->base, cmd->serial_number, y, sh->irq));
+		"Queued base %#.4lx cmd: 0x%p "
+		"slot %d irq %d\n", sh->base, cmd, y, sh->irq));
 
 	return 0;
 }
@@ -445,8 +444,7 @@ static int eata_pio_abort(struct scsi_cmnd *cmd)
 	unsigned int loop = 100;
 
 	DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
-		"eata_pio_abort called pid: %ld\n",
-		cmd->serial_number));
+		"eata_pio_abort called pid: 0x%p\n", cmd));
 
 	while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
 		if (--loop == 0) {
@@ -481,8 +479,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 	struct Scsi_Host *host = cmd->device->host;
 
 	DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
-		"eata_pio_reset called pid:%ld\n",
-		cmd->serial_number));
+		"eata_pio_reset called\n"));
 
 	spin_lock_irq(host->host_lock);
 
@@ -501,7 +498,7 @@ static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 
 		sp = HD(cmd)->ccb[x].cmd;
 		HD(cmd)->ccb[x].status = RESET;
-		printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->serial_number);
+		printk(KERN_WARNING "eata_pio_reset: slot %d in reset.\n", x);
 
 		if (sp == NULL)
 			panic("eata_pio_reset: slot %d, sp==NULL.\n", x);