diff options
| author | Kashyap, Desai <kashyap.desai@lsi.com> | 2009-09-23 17:26:58 +0530 |
|---|---|---|
| committer | James Bottomley <James.Bottomley@suse.de> | 2009-10-29 13:03:10 -0400 |
| commit | fa7f31673583a6e0876f8bb420735cdd8a3ffa57 (patch) | |
| tree | 5b547d903081571bc2cc5950de513beba4895ed0 /drivers/scsi/mpt2sas/mpt2sas_base.h | |
| parent | 9fec5f9fc2fbe7c6e39db01ae296528d9a20a5b1 (diff) | |
| download | kernel_samsung_smdk4412-fa7f31673583a6e0876f8bb420735cdd8a3ffa57.zip kernel_samsung_smdk4412-fa7f31673583a6e0876f8bb420735cdd8a3ffa57.tar.gz kernel_samsung_smdk4412-fa7f31673583a6e0876f8bb420735cdd8a3ffa57.tar.bz2 | |
[SCSI] mpt2sas: Support for stopping driver when Firmware encounters
Added command line option and shost sysfs attribute called
mpt2sas_fwfault_debug. When enduser writes a "1" to this parameter, this
will enable support in the driver for debugging firmware timeout related
issues. This handling was added in three areas (a) scsi error handling
callback called task_abort, (b) IOCTL interface, and (c) other timeouts that
result in diag resets, such as manufacturing config pages. When this
support is enabled, the driver will provide dump_stack to console, halt
controller firmware, and panic driver. The end user probably would want to
setup serial console redirection so the dump stack can be seen.
Here are the three methods for enable this support:
(a) # insmod mpt2sas.ko mpt2sas_fwfault_debug=1
(b) # echo 1 > /sys/module/mpt2sas/parameters/mpt2sas_fwfault_debug
(c) # echo 1 > /sys/class/scsi_host/host#/fwfault_debug (where # is
the host number)
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: Eric Moore <Eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_base.h')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_base.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index fa99ff2..0c75c0e 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -466,6 +466,7 @@ typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr); * @chip_phys: physical addrss prior to mapping * @pio_chip: I/O mapped register space * @logging_level: see mpt2sas_debug.h + * @fwfault_debug: debuging FW timeouts * @ir_firmware: IR firmware present * @bars: bitmask of BAR's that must be configured * @mask_interrupts: ignore interrupt @@ -587,6 +588,7 @@ struct MPT2SAS_ADAPTER { unsigned long chip_phys; unsigned long pio_chip; int logging_level; + int fwfault_debug; u8 ir_firmware; int bars; u8 mask_interrupts; @@ -803,6 +805,8 @@ int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc, Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request); void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type); +void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc); + /* scsih shared API */ u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); |