diff options
author | Pavel Machek <pavel@suse.cz> | 2008-10-01 14:36:56 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2008-10-10 15:31:09 -0700 |
commit | 66101de10957e07a6fd0365d5af9adf650246d14 (patch) | |
tree | 3a13f4d2ca1d5075523a7c82f8b53b0fc5d1b971 /drivers/staging/winbond/linux/wbusb.c | |
parent | 4d7b5c7f8ad49b7f01fb8aed83c560ac43cfbda8 (diff) | |
download | kernel_samsung_smdk4412-66101de10957e07a6fd0365d5af9adf650246d14.zip kernel_samsung_smdk4412-66101de10957e07a6fd0365d5af9adf650246d14.tar.gz kernel_samsung_smdk4412-66101de10957e07a6fd0365d5af9adf650246d14.tar.bz2 |
Staging: add w35und wifi driver
This is driver for w35und usb wifi -- also in kohjinsha
subnotebook. It should work well enough to associate and ping, but it
obviously needs to be rewritten two more times...
OTOH worst horrors (like embedded wifi stack) should have been fixed
already...
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/winbond/linux/wbusb.c')
-rw-r--r-- | drivers/staging/winbond/linux/wbusb.c | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c new file mode 100644 index 0000000..cbad5fb --- /dev/null +++ b/drivers/staging/winbond/linux/wbusb.c @@ -0,0 +1,404 @@ +/* + * Copyright 2008 Pavel Machek <pavel@suse.cz> + * + * Distribute under GPLv2. + */ +#include "sysdef.h" +#include <net/mac80211.h> + + +MODULE_AUTHOR( DRIVER_AUTHOR ); +MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1"); + + +//============================================================ +// vendor ID and product ID can into here for others +//============================================================ +static struct usb_device_id Id_Table[] = +{ + {USB_DEVICE( 0x0416, 0x0035 )}, + {USB_DEVICE( 0x18E8, 0x6201 )}, + {USB_DEVICE( 0x18E8, 0x6206 )}, + {USB_DEVICE( 0x18E8, 0x6217 )}, + {USB_DEVICE( 0x18E8, 0x6230 )}, + {USB_DEVICE( 0x18E8, 0x6233 )}, + {USB_DEVICE( 0x1131, 0x2035 )}, + { } +}; + +MODULE_DEVICE_TABLE(usb, Id_Table); + +static struct usb_driver wb35_driver = { + .name = "w35und", + .probe = wb35_probe, + .disconnect = wb35_disconnect, + .id_table = Id_Table, +}; + +static const struct ieee80211_rate wbsoft_rates[] = { + { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, +}; + +static const struct ieee80211_channel wbsoft_channels[] = { + { .center_freq = 2412}, +}; + +int wbsoft_enabled; +struct ieee80211_hw *my_dev; +PADAPTER my_adapter; + +static int wbsoft_add_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + printk("wbsoft_add interface called\n"); + return 0; +} + +static void wbsoft_remove_interface(struct ieee80211_hw *dev, + struct ieee80211_if_init_conf *conf) +{ + printk("wbsoft_remove interface called\n"); +} + +static int wbsoft_nop(void) +{ + printk("wbsoft_nop called\n"); + return 0; +} + +static void wbsoft_configure_filter(struct ieee80211_hw *dev, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, struct dev_mc_list *mclist) +{ + unsigned int bit_nr, new_flags; + u32 mc_filter[2]; + int i; + + new_flags = 0; + + if (*total_flags & FIF_PROMISC_IN_BSS) { + new_flags |= FIF_PROMISC_IN_BSS; + mc_filter[1] = mc_filter[0] = ~0; + } else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32)) { + new_flags |= FIF_ALLMULTI; + mc_filter[1] = mc_filter[0] = ~0; + } else { + mc_filter[1] = mc_filter[0] = 0; + for (i = 0; i < mc_count; i++) { + if (!mclist) + break; + printk("Should call ether_crc here\n"); + //bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; + bit_nr = 0; + + bit_nr &= 0x3F; + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + mclist = mclist->next; + } + } + + dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS; + + *total_flags = new_flags; +} + +static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb, + struct ieee80211_tx_control *control) +{ + char *buffer = kmalloc(skb->len, GFP_ATOMIC); + printk("Sending frame %d bytes\n", skb->len); + memcpy(buffer, skb->data, skb->len); + if (1 == MLMESendFrame(my_adapter, buffer, skb->len, FRAME_TYPE_802_11_MANAGEMENT)) + printk("frame sent ok (%d bytes)?\n", skb->len); + return NETDEV_TX_OK; +} + + +static int wbsoft_start(struct ieee80211_hw *dev) +{ + wbsoft_enabled = 1; + printk("wbsoft_start called\n"); + return 0; +} + +static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) +{ + ChanInfo ch; + printk("wbsoft_config called\n"); + + ch.band = 1; + ch.ChanNo = 1; /* Should use channel_num, or something, as that is already pre-translated */ + + + hal_set_current_channel(&my_adapter->sHwData, ch); + hal_set_beacon_period(&my_adapter->sHwData, conf->beacon_int); +// hal_set_cap_info(&my_adapter->sHwData, ?? ); +// hal_set_ssid(phw_data_t pHwData, PUCHAR pssid, u8 ssid_len); ?? + hal_set_accept_broadcast(&my_adapter->sHwData, 1); + hal_set_accept_promiscuous(&my_adapter->sHwData, 1); + hal_set_accept_multicast(&my_adapter->sHwData, 1); + hal_set_accept_beacon(&my_adapter->sHwData, 1); + hal_set_radio_mode(&my_adapter->sHwData, 0); + //hal_set_antenna_number( phw_data_t pHwData, u8 number ) + //hal_set_rf_power(phw_data_t pHwData, u8 PowerIndex) + + +// hal_start_bss(&my_adapter->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE); ?? + +//void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, +// u8 length, unsigned char basic_rate_set) + + return 0; +} + +static int wbsoft_config_interface(struct ieee80211_hw *dev, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + printk("wbsoft_config_interface called\n"); + return 0; +} + +static u64 wbsoft_get_tsf(struct ieee80211_hw *dev) +{ + printk("wbsoft_get_tsf called\n"); + return 0; +} + +static const struct ieee80211_ops wbsoft_ops = { + .tx = wbsoft_tx, + .start = wbsoft_start, /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */ + .stop = wbsoft_nop, + .add_interface = wbsoft_add_interface, + .remove_interface = wbsoft_remove_interface, + .config = wbsoft_config, + .config_interface = wbsoft_config_interface, + .configure_filter = wbsoft_configure_filter, + .get_stats = wbsoft_nop, + .get_tx_stats = wbsoft_nop, + .get_tsf = wbsoft_get_tsf, +// conf_tx: hal_set_cwmin()/hal_set_cwmax; +}; + +struct wbsoft_priv { +}; + + +int __init wb35_init(void) +{ + printk("[w35und]driver init\n"); + return usb_register(&wb35_driver); +} + +void __exit wb35_exit(void) +{ + printk("[w35und]driver exit\n"); + usb_deregister( &wb35_driver ); +} + +module_init(wb35_init); +module_exit(wb35_exit); + +// Usb kernel subsystem will call this function when a new device is plugged into. +int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) +{ + PADAPTER Adapter; + PWBLINUX pWbLinux; + PWBUSB pWbUsb; + struct usb_host_interface *interface; + struct usb_endpoint_descriptor *endpoint; + int i, ret = -1; + u32 ltmp; + struct usb_device *udev = interface_to_usbdev(intf); + + usb_get_dev(udev); + + printk("[w35und]wb35_probe ->\n"); + + do { + for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) { + if ((udev->descriptor.idVendor == Id_Table[i].idVendor) && + (udev->descriptor.idProduct == Id_Table[i].idProduct)) { + printk("[w35und]Found supported hardware\n"); + break; + } + } + if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) { + #ifdef _PE_USB_INI_DUMP_ + WBDEBUG(("[w35und] This is not the one we are interested about\n")); + #endif + return -ENODEV; + } + + // 20060630.2 Check the device if it already be opened + ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), + 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, + 0x0, 0x400, <mp, 4, HZ*100 ); + if( ret < 0 ) + break; + + ltmp = cpu_to_le32(ltmp); + if (ltmp) // Is already initialized? + break; + + + Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); + + my_adapter = Adapter; + pWbLinux = &Adapter->WbLinux; + pWbUsb = &Adapter->sHwData.WbUsb; + pWbUsb->udev = udev; + + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; + + if (endpoint[2].wMaxPacketSize == 512) { + printk("[w35und] Working on USB 2.0\n"); + pWbUsb->IsUsb20 = 1; + } + + if (!WbWLanInitialize(Adapter)) { + printk("[w35und]WbWLanInitialize fail\n"); + break; + } + + { + struct wbsoft_priv *priv; + struct ieee80211_hw *dev; + int res; + + dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); + + if (!dev) { + printk("w35und: ieee80211 alloc failed\n" ); + BUG(); + } + + my_dev = dev; + + SET_IEEE80211_DEV(dev, &udev->dev); + { + phw_data_t pHwData = &Adapter->sHwData; + unsigned char dev_addr[MAX_ADDR_LEN]; + hal_get_permanent_address(pHwData, dev_addr); + SET_IEEE80211_PERM_ADDR(dev, dev_addr); + } + + + dev->extra_tx_headroom = 12; /* FIXME */ + dev->flags = 0; + + dev->channel_change_time = 1000; +// dev->max_rssi = 100; + + dev->queues = 1; + + static struct ieee80211_supported_band band; + + band.channels = wbsoft_channels; + band.n_channels = ARRAY_SIZE(wbsoft_channels); + band.bitrates = wbsoft_rates; + band.n_bitrates = ARRAY_SIZE(wbsoft_rates); + + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; +#if 0 + wbsoft_modes[0].num_channels = 1; + wbsoft_modes[0].channels = wbsoft_channels; + wbsoft_modes[0].mode = MODE_IEEE80211B; + wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); + wbsoft_modes[0].rates = wbsoft_rates; + + res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); + BUG_ON(res); +#endif + + res = ieee80211_register_hw(dev); + BUG_ON(res); + } + + usb_set_intfdata( intf, Adapter ); + + printk("[w35und] _probe OK\n"); + return 0; + + } while(FALSE); + + return -ENOMEM; +} + +void packet_came(char *pRxBufferAddress, int PacketSize) +{ + struct sk_buff *skb; + struct ieee80211_rx_status rx_status = {0}; + + if (!wbsoft_enabled) + return; + + skb = dev_alloc_skb(PacketSize); + if (!skb) { + printk("Not enough memory for packet, FIXME\n"); + return; + } + + memcpy(skb_put(skb, PacketSize), + pRxBufferAddress, + PacketSize); + +/* + rx_status.rate = 10; + rx_status.channel = 1; + rx_status.freq = 12345; + rx_status.phymode = MODE_IEEE80211B; +*/ + + ieee80211_rx_irqsafe(my_dev, skb, &rx_status); +} + +unsigned char +WbUsb_initial(phw_data_t pHwData) +{ + return 1; +} + + +void +WbUsb_destroy(phw_data_t pHwData) +{ +} + +int wb35_open(struct net_device *netdev) +{ + PADAPTER Adapter = (PADAPTER)netdev->priv; + phw_data_t pHwData = &Adapter->sHwData; + + netif_start_queue(netdev); + + //TODO : put here temporarily + hal_set_accept_broadcast(pHwData, 1); // open accept broadcast + + return 0; +} + +int wb35_close(struct net_device *netdev) +{ + netif_stop_queue(netdev); + return 0; +} + +void wb35_disconnect(struct usb_interface *intf) +{ + PWBLINUX pWbLinux; + PADAPTER Adapter = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + + pWbLinux = &Adapter->WbLinux; + + // Card remove + WbWlanHalt(Adapter); + +} + + |