diff options
author | Ingo Molnar <mingo@elte.hu> | 2010-10-07 09:43:38 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2010-10-07 09:43:45 +0200 |
commit | 556ef63255f1a6f82910a637c4164dbf7d3d1af2 (patch) | |
tree | ae209fe4959e0837bf4eb72abc6e02c8a82179a1 /drivers/usb | |
parent | d4f8f217b8a5d5bd02af979650418dca4caec472 (diff) | |
parent | cb655d0f3d57c23db51b981648e452988c0223f9 (diff) | |
download | kernel_samsung_smdk4412-556ef63255f1a6f82910a637c4164dbf7d3d1af2.zip kernel_samsung_smdk4412-556ef63255f1a6f82910a637c4164dbf7d3d1af2.tar.gz kernel_samsung_smdk4412-556ef63255f1a6f82910a637c4164dbf7d3d1af2.tar.bz2 |
Merge commit 'v2.6.36-rc7' into core/rcu
Merge reason: Update from -rc3 to -rc7.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/core/Kconfig | 6 | ||||
-rw-r--r-- | drivers/usb/core/file.c | 35 | ||||
-rw-r--r-- | drivers/usb/core/message.c | 1 | ||||
-rw-r--r-- | drivers/usb/host/ehci-pci.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb/cppi_dma.c | 1 | ||||
-rw-r--r-- | drivers/usb/musb/musb_debugfs.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 75 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.h | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget_ep0.c | 9 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 6 | ||||
-rw-r--r-- | drivers/usb/otg/twl4030-usb.c | 78 | ||||
-rw-r--r-- | drivers/usb/serial/mos7720.c | 3 | ||||
-rw-r--r-- | drivers/usb/serial/mos7840.c | 3 |
13 files changed, 141 insertions, 88 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 7e59444..9eed5b5 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -91,12 +91,12 @@ config USB_DYNAMIC_MINORS If you are unsure about this, say N here. config USB_SUSPEND - bool "USB runtime power management (suspend/resume and wakeup)" + bool "USB runtime power management (autosuspend) and wakeup" depends on USB && PM_RUNTIME help If you say Y here, you can use driver calls or the sysfs - "power/level" file to suspend or resume individual USB - peripherals and to enable or disable autosuspend (see + "power/control" file to enable or disable autosuspend for + individual USB peripherals (see Documentation/usb/power-management.txt for more details). Also, USB "remote wakeup" signaling is supported, whereby some diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index f06f5db..1e6ccef 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -159,9 +159,9 @@ void usb_major_cleanup(void) int usb_register_dev(struct usb_interface *intf, struct usb_class_driver *class_driver) { - int retval = -EINVAL; + int retval; int minor_base = class_driver->minor_base; - int minor = 0; + int minor; char name[20]; char *temp; @@ -173,12 +173,17 @@ int usb_register_dev(struct usb_interface *intf, */ minor_base = 0; #endif - intf->minor = -1; - - dbg ("looking for a minor, starting at %d", minor_base); if (class_driver->fops == NULL) - goto exit; + return -EINVAL; + if (intf->minor >= 0) + return -EADDRINUSE; + + retval = init_usb_class(); + if (retval) + return retval; + + dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base); down_write(&minor_rwsem); for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) { @@ -186,20 +191,12 @@ int usb_register_dev(struct usb_interface *intf, continue; usb_minors[minor] = class_driver->fops; - - retval = 0; + intf->minor = minor; break; } up_write(&minor_rwsem); - - if (retval) - goto exit; - - retval = init_usb_class(); - if (retval) - goto exit; - - intf->minor = minor; + if (intf->minor < 0) + return -EXFULL; /* create a usb class device for this usb interface */ snprintf(name, sizeof(name), class_driver->name, minor - minor_base); @@ -213,11 +210,11 @@ int usb_register_dev(struct usb_interface *intf, "%s", temp); if (IS_ERR(intf->usb_dev)) { down_write(&minor_rwsem); - usb_minors[intf->minor] = NULL; + usb_minors[minor] = NULL; + intf->minor = -1; up_write(&minor_rwsem); retval = PTR_ERR(intf->usb_dev); } -exit: return retval; } EXPORT_SYMBOL_GPL(usb_register_dev); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 844683e..9f0ce7d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1802,6 +1802,7 @@ free_interfaces: intf->dev.groups = usb_interface_groups; intf->dev.dma_mask = dev->dev.dma_mask; INIT_WORK(&intf->reset_ws, __usb_queue_reset_device); + intf->minor = -1; device_initialize(&intf->dev); dev_set_name(&intf->dev, "%d-%s:%d.%d", dev->bus->busnum, dev->devpath, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 58b72d7..a1e8d27 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -119,6 +119,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd) ehci->broken_periodic = 1; ehci_info(ehci, "using broken periodic workaround\n"); } + if (pdev->device == 0x0806 || pdev->device == 0x0811 + || pdev->device == 0x0829) { + ehci_info(ehci, "disable lpm for langwell/penwell\n"); + ehci->has_lpm = 0; + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 59dc3d3..5ab5bb8 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -322,6 +322,7 @@ cppi_channel_allocate(struct dma_controller *c, index, transmit ? 'T' : 'R', cppi_ch); cppi_ch->hw_ep = ep; cppi_ch->channel.status = MUSB_DMA_STATUS_FREE; + cppi_ch->channel.max_len = 0x7fffffff; DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R'); return &cppi_ch->channel; diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index c79a5e3..9e8639d 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -195,15 +195,14 @@ static const struct file_operations musb_regdump_fops = { static int musb_test_mode_open(struct inode *inode, struct file *file) { - file->private_data = inode->i_private; - return single_open(file, musb_test_mode_show, inode->i_private); } static ssize_t musb_test_mode_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) { - struct musb *musb = file->private_data; + struct seq_file *s = file->private_data; + struct musb *musb = s->private; u8 test = 0; char buf[18]; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6fca870..d065e23 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -300,6 +300,11 @@ static void txstate(struct musb *musb, struct musb_request *req) #ifndef CONFIG_MUSB_PIO_ONLY if (is_dma_capable() && musb_ep->dma) { struct dma_controller *c = musb->dma_controller; + size_t request_size; + + /* setup DMA, then program endpoint CSR */ + request_size = min_t(size_t, request->length - request->actual, + musb_ep->dma->max_len); use_dma = (request->dma != DMA_ADDR_INVALID); @@ -307,11 +312,6 @@ static void txstate(struct musb *musb, struct musb_request *req) #ifdef CONFIG_USB_INVENTRA_DMA { - size_t request_size; - - /* setup DMA, then program endpoint CSR */ - request_size = min_t(size_t, request->length, - musb_ep->dma->max_len); if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; else @@ -373,8 +373,8 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, 0, - request->dma, - request->length); + request->dma + request->actual, + request_size); if (!use_dma) { c->channel_release(musb_ep->dma); musb_ep->dma = NULL; @@ -386,8 +386,8 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, request->zero, - request->dma, - request->length); + request->dma + request->actual, + request_size); #endif } #endif @@ -501,26 +501,14 @@ void musb_g_tx(struct musb *musb, u8 epnum) request->zero = 0; } - /* ... or if not, then complete it. */ - musb_g_giveback(musb_ep, request, 0); - - /* - * Kickstart next transfer if appropriate; - * the packet that just completed might not - * be transmitted for hours or days. - * REVISIT for double buffering... - * FIXME revisit for stalls too... - */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - return; - - request = musb_ep->desc ? next_request(musb_ep) : NULL; - if (!request) { - DBG(4, "%s idle now\n", - musb_ep->end_point.name); - return; + if (request->actual == request->length) { + musb_g_giveback(musb_ep, request, 0); + request = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!request) { + DBG(4, "%s idle now\n", + musb_ep->end_point.name); + return; + } } } @@ -568,11 +556,19 @@ static void rxstate(struct musb *musb, struct musb_request *req) { const u8 epnum = req->epnum; struct usb_request *request = &req->request; - struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; + struct musb_ep *musb_ep; void __iomem *epio = musb->endpoints[epnum].regs; unsigned fifo_count = 0; - u16 len = musb_ep->packet_sz; + u16 len; u16 csr = musb_readw(epio, MUSB_RXCSR); + struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; + + if (hw_ep->is_shared_fifo) + musb_ep = &hw_ep->ep_in; + else + musb_ep = &hw_ep->ep_out; + + len = musb_ep->packet_sz; /* We shouldn't get here while DMA is active, but we do... */ if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { @@ -647,8 +643,8 @@ static void rxstate(struct musb *musb, struct musb_request *req) */ csr |= MUSB_RXCSR_DMAENAB; -#ifdef USE_MODE1 csr |= MUSB_RXCSR_AUTOCLEAR; +#ifdef USE_MODE1 /* csr |= MUSB_RXCSR_DMAMODE; */ /* this special sequence (enabling and then @@ -663,10 +659,11 @@ static void rxstate(struct musb *musb, struct musb_request *req) if (request->actual < request->length) { int transfer_size = 0; #ifdef USE_MODE1 - transfer_size = min(request->length, + transfer_size = min(request->length - request->actual, channel->max_len); #else - transfer_size = len; + transfer_size = min(request->length - request->actual, + (unsigned)len); #endif if (transfer_size <= musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; @@ -740,9 +737,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) u16 csr; struct usb_request *request; void __iomem *mbase = musb->mregs; - struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; + struct musb_ep *musb_ep; void __iomem *epio = musb->endpoints[epnum].regs; struct dma_channel *dma; + struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; + + if (hw_ep->is_shared_fifo) + musb_ep = &hw_ep->ep_in; + else + musb_ep = &hw_ep->ep_out; musb_ep_select(mbase, epnum); @@ -1081,7 +1084,7 @@ struct free_record { /* * Context: controller locked, IRQs blocked. */ -static void musb_ep_restart(struct musb *musb, struct musb_request *req) +void musb_ep_restart(struct musb *musb, struct musb_request *req) { DBG(3, "<== %s request %p len %u on hw_ep%d\n", req->tx ? "TX/IN" : "RX/OUT", diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index c8b1403..572b1da 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -105,4 +105,6 @@ extern void musb_gadget_cleanup(struct musb *); extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int); +extern void musb_ep_restart(struct musb *, struct musb_request *); + #endif /* __MUSB_GADGET_H */ diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 59bef8f..6dd03f4 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -261,6 +261,7 @@ __acquires(musb->lock) ctrlrequest->wIndex & 0x0f; struct musb_ep *musb_ep; struct musb_hw_ep *ep; + struct musb_request *request; void __iomem *regs; int is_in; u16 csr; @@ -302,6 +303,14 @@ __acquires(musb->lock) musb_writew(regs, MUSB_RXCSR, csr); } + /* Maybe start the first request in the queue */ + request = to_musb_request( + next_request(musb_ep)); + if (!musb_ep->busy && request) { + DBG(3, "restarting the request\n"); + musb_ep_restart(musb, request); + } + /* select ep0 again */ musb_ep_select(mbase, 0); } break; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 877d20b..9e65c47 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -660,6 +660,12 @@ static bool musb_tx_dma_program(struct dma_controller *dma, qh->segsize = length; + /* + * Ensure the data reaches to main memory before starting + * DMA transfer + */ + wmb(); + if (!dma->channel_program(channel, pkt_size, mode, urb->transfer_dma + offset, length)) { dma->channel_release(channel); diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 05aaac1..0bc9769 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on) } } -static void twl4030_phy_power(struct twl4030_usb *twl, int on) +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) { - u8 pwr; + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ if (on) { regulator_enable(twl->usb3v1); regulator_enable(twl->usb1v8); @@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); regulator_enable(twl->usb1v5); - pwr &= ~PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) | (PHY_CLK_CTRL_CLOCKGATING_EN | PHY_CLK_CTRL_CLK32K_EN)); - } else { - pwr |= PHY_PWR_PHYPWD; - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + } else { + __twl4030_phy_power(twl, 0); regulator_disable(twl->usb1v5); regulator_disable(twl->usb1v8); regulator_disable(twl->usb3v1); @@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) twl4030_phy_power(twl, 0); twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); } -static void twl4030_phy_resume(struct twl4030_usb *twl) +static void __twl4030_phy_resume(struct twl4030_usb *twl) { - if (!twl->asleep) - return; - twl4030_phy_power(twl, 1); twl4030_i2c_access(twl, 1); twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + __twl4030_phy_resume(twl); twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); } static int twl4030_usb_ldo_init(struct twl4030_usb *twl) @@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl) twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY); - /* put VUSB3V1 LDO in active state */ - twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); @@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl4030_usb_phy_init(struct twl4030_usb *twl) +{ + int status; + + status = twl4030_usb_linkstat(twl); + if (status >= 0) { + if (status == USB_EVENT_NONE) { + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + } else { + __twl4030_phy_resume(twl); + twl->asleep = 0; + } + + blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->otg.gadget); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); +} + static int twl4030_set_suspend(struct otg_transceiver *x, int suspend) { struct twl4030_usb *twl = xceiv_to_twl(x); @@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; int status, err; - u8 pwr; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) twl->otg.set_peripheral = twl4030_set_peripheral; twl->otg.set_suspend = twl4030_set_suspend; twl->usb_mode = pdata->usb_mode; - - pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - twl->asleep = (pwr & PHY_PWR_PHYPWD); + twl->asleep = 1; /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) return status; } - /* The IRQ handler just handles changes from the previous states - * of the ID and VBUS pins ... in probe() we must initialize that - * previous state. The easy way: fake an IRQ. - * - * REVISIT: a real IRQ might have happened already, if PREEMPT is - * enabled. Else the IRQ may not yet be configured or enabled, - * because of scheduling delays. + /* Power down phy or make it work according to + * current link state. */ - twl4030_usb_irq(twl->irq, twl); + twl4030_usb_phy_init(twl); dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); return 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 30922a7..aa66581 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2024,6 +2024,9 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file, case TIOCGICOUNT: cnow = mos7720_port->icount; + + memset(&icount, 0, sizeof(struct serial_icounter_struct)); + icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 1c9b6e9..1a42bc2 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2285,6 +2285,9 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file, case TIOCGICOUNT: cnow = mos7840_port->icount; smp_rmb(); + + memset(&icount, 0, sizeof(struct serial_icounter_struct)); + icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; |