[ARM] 4133/1: Add ISB after changes to CP15 registers

According to ARM ARM, changes to the CP15 registers are only
guaranteed to be visible after an Instruction Synchronization Barrier
(ISB). This patch adds the ISB at the end of set_cr and
set_copro_access functions and also moves them further down in the
file, below the isb macro definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 36 insertions, 34 deletions

diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index e5aa372..f438690 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -140,6 +140,40 @@ static inline int cpu_is_xsc3(void)
 #define	cpu_is_xscale()	1
 #endif
 
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+#define mb() dmb()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
 extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
@@ -154,6 +188,7 @@ static inline void set_cr(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
 #ifndef CONFIG_SMP
@@ -176,42 +211,9 @@ static inline void set_copro_access(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-				    : : "r" (0) : "memory")
-#else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-#define mb() dmb()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
 /*
  * switch_mm() may do a full cache flush over the context switch,
  * so enable interrupts over the context switch to avoid high