diff options
45 files changed, 1596 insertions, 1365 deletions
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx index 6bb916d..68a4fe3 100644 --- a/Documentation/spi/pxa2xx +++ b/Documentation/spi/pxa2xx @@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers ----------------------------------- Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a "platform device". The master configuration is passed to the driver via a table -found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h: +found in include/linux/spi/pxa2xx_spi.h: struct pxa2xx_spi_master { enum pxa_ssp_type ssp_type; @@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See Each slave device attached to the PXA must provide slave specific configuration information via the structure "pxa2xx_spi_chip" found in -"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver +"include/linux/spi/pxa2xx_spi.h". The pxa2xx_spi master controller driver will uses the configuration whenever the driver communicates with the slave device. All fields are optional. diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 2652af1..a5f8a80 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -412,12 +412,7 @@ static struct resource dm355_spi0_resources[] = { static struct davinci_spi_platform_data dm355_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, - .clk_internal = 1, - .cs_hold = 1, - .intr_level = 0, - .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */ - .c2tdelay = 0, - .t2cdelay = 0, + .cshold_bug = true, }; static struct platform_device dm355_spi0_device = { .name = "spi_davinci", diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c466d71..02d2cc3 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -625,12 +625,6 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32); static struct davinci_spi_platform_data dm365_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, - .clk_internal = 1, - .cs_hold = 1, - .intr_level = 0, - .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */ - .c2tdelay = 0, - .t2cdelay = 0, }; static struct resource dm365_spi0_resources[] = { diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h index 910efbf..38f4da5 100644 --- a/arch/arm/mach-davinci/include/mach/spi.h +++ b/arch/arm/mach-davinci/include/mach/spi.h @@ -19,26 +19,66 @@ #ifndef __ARCH_ARM_DAVINCI_SPI_H #define __ARCH_ARM_DAVINCI_SPI_H +#define SPI_INTERN_CS 0xFF + enum { SPI_VERSION_1, /* For DM355/DM365/DM6467 */ SPI_VERSION_2, /* For DA8xx */ }; +/** + * davinci_spi_platform_data - Platform data for SPI master device on DaVinci + * + * @version: version of the SPI IP. Different DaVinci devices have slightly + * varying versions of the same IP. + * @num_chipselect: number of chipselects supported by this SPI master + * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt + * controller withn the SoC. Possible values are 0 and 1. + * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. + * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary + * to populate if all chip-selects are internal. + * @cshold_bug: set this to true if the SPI controller on your chip requires + * a write to CSHOLD bit in between transfers (like in DM355). + */ struct davinci_spi_platform_data { u8 version; u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; +}; + +/** + * davinci_spi_config - Per-chip-select configuration for SPI slave devices + * + * @wdelay: amount of delay between transmissions. Measured in number of + * SPI module clocks. + * @odd_parity: polarity of parity flag at the end of transmit data stream. + * 0 - odd parity, 1 - even parity. + * @parity_enable: enable transmission of parity at end of each transmit + * data stream. + * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. + * @timer_disable: disable chip-select timers (setup and hold) + * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. + * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. + * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured + * in number of SPI clocks. + * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in + * number of SPI clocks. + */ +struct davinci_spi_config { u8 wdelay; u8 odd_parity; u8 parity_enable; - u8 wait_enable; +#define SPI_IO_TYPE_INTR 0 +#define SPI_IO_TYPE_POLL 1 +#define SPI_IO_TYPE_DMA 2 + u8 io_type; u8 timer_disable; - u8 clk_internal; - u8 cs_hold; - u8 intr_level; - u8 poll_mode; - u8 use_dma; u8 c2tdelay; u8 t2cdelay; + u8 t2edelay; + u8 c2edelay; }; #endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c index f1a7703..93f59f8 100644 --- a/arch/arm/mach-pxa/cm-x255.c +++ b/arch/arm/mach-pxa/cm-x255.c @@ -17,13 +17,13 @@ #include <linux/mtd/nand-gpio.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <asm/mach/map.h> #include <mach/pxa25x.h> -#include <mach/pxa2xx_spi.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index a9926bb..b88d601 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -19,12 +19,12 @@ #include <video/mbxfb.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/spi/libertas_spi.h> #include <mach/pxa27x.h> #include <mach/ohci.h> #include <mach/mmc.h> -#include <mach/pxa2xx_spi.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 9f3e5af..a5452a3 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -28,6 +28,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> #include <video/w100fb.h> @@ -48,7 +49,6 @@ #include <mach/irda.h> #include <mach/mmc.h> #include <mach/udc.h> -#include <mach/pxa2xx_spi.h> #include <mach/corgi.h> #include <mach/sharpsl_pm.h> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 022c2fa..4c766e3 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -3,6 +3,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/spi/pxa2xx_spi.h> #include <asm/pmu.h> #include <mach/udc.h> @@ -12,7 +13,6 @@ #include <mach/irda.h> #include <mach/ohci.h> #include <plat/pxa27x_keypad.h> -#include <mach/pxa2xx_spi.h> #include <mach/camera.h> #include <mach/audio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 4cefd1d..a78bb30 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -26,6 +26,7 @@ #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> #include <linux/spi/libertas_spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> #include <linux/i2c.h> @@ -46,7 +47,6 @@ #include <plat/pxa27x_keypad.h> #include <plat/i2c.h> #include <mach/camera.h> -#include <mach/pxa2xx_spi.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index cacb21b..a908e0a 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -33,6 +33,7 @@ #include <linux/regulator/max1586.h> #include <linux/spi/ads7846.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> @@ -43,7 +44,6 @@ #include <mach/hx4700.h> #include <plat/i2c.h> #include <mach/irda.h> -#include <mach/pxa2xx_spi.h> #include <video/platform_lcd.h> #include <video/w100fb.h> diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index ac6ee12..6cedc81 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -24,7 +24,7 @@ #include <mach/mxm8x10.h> #include <linux/spi/spi.h> -#include <mach/pxa2xx_spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/can/platform/mcp251x.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h deleted file mode 100644 index b87cecd..0000000 --- a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef PXA2XX_SPI_H_ -#define PXA2XX_SPI_H_ - -#define PXA2XX_CS_ASSERT (0x01) -#define PXA2XX_CS_DEASSERT (0x02) - -/* device.platform_data for SSP controller devices */ -struct pxa2xx_spi_master { - u32 clock_enable; - u16 num_chipselect; - u8 enable_dma; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct pxa2xx_spi_chip { - u8 tx_threshold; - u8 rx_threshold; - u8 dma_burst_size; - u32 timeout; - u8 enable_loopback; - int gpio_cs; - void (*cs_control)(u32 command); -}; - -extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); - -#endif /*PXA2XX_SPI_H_*/ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 719c260..ccb7bfa 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/smc91x.h> #include <linux/i2c.h> #include <linux/leds.h> @@ -42,7 +43,6 @@ #include <mach/pxa300.h> #include <mach/pxafb.h> #include <mach/mmc.h> -#include <mach/pxa2xx_spi.h> #include <plat/pxa27x_keypad.h> #include <mach/littleton.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index d337548..3072dbe 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -25,7 +25,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <mach/pxa2xx_spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <asm/setup.h> #include <asm/memory.h> diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 8547c9a..1fc8a66 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -25,12 +25,12 @@ #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/max7301.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/pxa27x.h> -#include <mach/pxa2xx_spi.h> #include <mach/pcm027.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 8451790..4f0ff1a 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -25,6 +25,7 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <mach/hardware.h> @@ -43,7 +44,6 @@ #include <mach/irda.h> #include <mach/poodle.h> #include <mach/pxafb.h> -#include <mach/pxa2xx_spi.h> #include <plat/i2c.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 0499a69..0bc9387 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -23,7 +23,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> -#include <linux/mtd/physmap.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/input/matrix_keypad.h> #include <linux/regulator/machine.h> @@ -42,7 +42,6 @@ #include <mach/mmc.h> #include <mach/ohci.h> #include <mach/pxafb.h> -#include <mach/pxa2xx_spi.h> #include <mach/spitz.h> #include <mach/sharpsl_pm.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 3498a14..9a14fdb 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -46,11 +46,11 @@ #include <plat/i2c.h> #include <mach/mmc.h> #include <mach/udc.h> -#include <mach/pxa2xx_spi.h> #include <mach/pxa27x-udc.h> #include <mach/smemc.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/mfd/da903x.h> #include <linux/sht15.h> diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 57d61ee..af152e7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -32,6 +32,7 @@ #include <linux/gpio.h> #include <linux/pda_power.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/input/matrix_keypad.h> #include <asm/setup.h> @@ -44,7 +45,6 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> -#include <mach/pxa2xx_spi.h> #include <mach/audio.h> #include <mach/smemc.h> diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 43fc9ca..423261d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -40,7 +40,6 @@ #include <asm/mach/flash.h> #include <mach/pxa27x.h> -#include <mach/pxa2xx_spi.h> #include <mach/trizeps4.h> #include <mach/audio.h> #include <mach/pxafb.h> diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 527c2a1..a323e07 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -20,6 +20,7 @@ #include <linux/z2_battery.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/spi/libertas_spi.h> #include <linux/spi/lms283gf05.h> #include <linux/power_supply.h> @@ -38,7 +39,6 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> -#include <mach/pxa2xx_spi.h> #include <plat/i2c.h> diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index c87f2b3..bf034c7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -20,6 +20,7 @@ #include <linux/dm9000.h> #include <linux/mmc/host.h> #include <linux/spi/spi.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> @@ -41,7 +42,6 @@ #include <mach/pxa27x-udc.h> #include <mach/udc.h> #include <mach/pxafb.h> -#include <mach/pxa2xx_spi.h> #include <mach/mfp-pxa27x.h> #include <mach/pm.h> #include <mach/audio.h> diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index c6357e5..58b7980 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -28,11 +28,11 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/io.h> #include <asm/irq.h> #include <mach/hardware.h> -#include <plat/ssp.h> static DEFINE_MUTEX(ssp_lock); static LIST_HEAD(ssp_list); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 78f9fd0..1906840 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -111,11 +111,14 @@ config SPI_COLDFIRE_QSPI will be called coldfire_qspi. config SPI_DAVINCI - tristate "SPI controller driver for DaVinci/DA8xx SoC's" + tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" depends on SPI_MASTER && ARCH_DAVINCI select SPI_BITBANG help - SPI master controller for DaVinci and DA8xx SPI modules. + SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. + + This driver can also be built as a module. The module will be called + davinci_spi. config SPI_EP93XX tristate "Cirrus Logic EP93xx SPI controller" @@ -267,12 +270,15 @@ config SPI_PPC4xx config SPI_PXA2XX tristate "PXA2xx SSP SPI master" - depends on ARCH_PXA && EXPERIMENTAL - select PXA_SSP + depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL + select PXA_SSP if ARCH_PXA help - This enables using a PXA2xx SSP port as a SPI master controller. - The driver can be configured to use any SSP port and additional - documentation can be found a Documentation/spi/pxa2xx. + This enables using a PXA2xx or Sodaville SSP port as a SPI master + controller. The driver can be configured to use any SSP port and + additional documentation can be found a Documentation/spi/pxa2xx. + +config SPI_PXA2XX_PCI + def_bool SPI_PXA2XX && X86_32 && PCI config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" @@ -353,7 +359,6 @@ config SPI_XILINX tristate "Xilinx SPI controller common module" depends on HAS_IOMEM && EXPERIMENTAL select SPI_BITBANG - select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE) help This exposes the SPI controller IP from the Xilinx EDK. @@ -362,19 +367,6 @@ config SPI_XILINX Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" -config SPI_XILINX_OF - tristate "Xilinx SPI controller OF device" - depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE) - help - This is the OF driver for the SPI controller IP from the Xilinx EDK. - -config SPI_XILINX_PLTFM - tristate "Xilinx SPI controller platform device" - depends on SPI_XILINX - help - This is the platform driver for the SPI controller IP - from the Xilinx EDK. - config SPI_NUC900 tristate "Nuvoton NUC900 series SPI" depends on ARCH_W90X900 && EXPERIMENTAL @@ -396,6 +388,10 @@ config SPI_DW_PCI tristate "PCI interface driver for DW SPI core" depends on SPI_DESIGNWARE && PCI +config SPI_DW_MID_DMA + bool "DMA support for DW SPI controller on Intel Moorestown platform" + depends on SPI_DW_PCI && INTEL_MID_DMAC + config SPI_DW_MMIO tristate "Memory-mapped io interface driver for DW SPI core" depends on SPI_DESIGNWARE && HAVE_CLK diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 8bc1a5a..3a42463 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -17,13 +17,15 @@ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o -obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o +obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o +dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o +obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o @@ -43,8 +45,6 @@ obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o -obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o -obj-$(CONFIG_SPI_XILINX_PLTFM) += xilinx_spi_pltfm.o obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index fb3d1b3..a2a5921 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -253,11 +253,6 @@ #define STATE_ERROR ((void *) -1) /* - * Queue State - */ -#define QUEUE_RUNNING (0) -#define QUEUE_STOPPED (1) -/* * SSP State - Whether Enabled or Disabled */ #define SSP_DISABLED (0) @@ -344,7 +339,7 @@ struct vendor_data { * @lock: spinlock to syncronise access to driver data * @workqueue: a workqueue on which any spi_message request is queued * @busy: workqueue is busy - * @run: workqueue is running + * @running: workqueue is running * @pump_transfers: Tasklet used in Interrupt Transfer mode * @cur_msg: Pointer to current spi_message being processed * @cur_transfer: Pointer to current spi_transfer @@ -369,8 +364,8 @@ struct pl022 { struct work_struct pump_messages; spinlock_t queue_lock; struct list_head queue; - int busy; - int run; + bool busy; + bool running; /* Message transfer pump */ struct tasklet_struct pump_transfers; struct spi_message *cur_msg; @@ -782,9 +777,9 @@ static void *next_transfer(struct pl022 *pl022) static void unmap_free_dma_scatter(struct pl022 *pl022) { /* Unmap and free the SG tables */ - dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); - dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); sg_free_table(&pl022->sgt_rx); sg_free_table(&pl022->sgt_tx); @@ -917,7 +912,7 @@ static int configure_dma(struct pl022 *pl022) }; unsigned int pages; int ret; - int sglen; + int rx_sglen, tx_sglen; struct dma_chan *rxchan = pl022->dma_rx_channel; struct dma_chan *txchan = pl022->dma_tx_channel; struct dma_async_tx_descriptor *rxdesc; @@ -956,7 +951,7 @@ static int configure_dma(struct pl022 *pl022) tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; break; case WRITING_U32: - tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;; + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; break; } @@ -991,20 +986,20 @@ static int configure_dma(struct pl022 *pl022) pl022->cur_transfer->len, &pl022->sgt_tx); /* Map DMA buffers */ - sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl, pl022->sgt_rx.nents, DMA_FROM_DEVICE); - if (!sglen) + if (!rx_sglen) goto err_rx_sgmap; - sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); - if (!sglen) + if (!tx_sglen) goto err_tx_sgmap; /* Send both scatterlists */ rxdesc = rxchan->device->device_prep_slave_sg(rxchan, pl022->sgt_rx.sgl, - pl022->sgt_rx.nents, + rx_sglen, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!rxdesc) @@ -1012,7 +1007,7 @@ static int configure_dma(struct pl022 *pl022) txdesc = txchan->device->device_prep_slave_sg(txchan, pl022->sgt_tx.sgl, - pl022->sgt_tx.nents, + tx_sglen, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!txdesc) @@ -1040,10 +1035,10 @@ err_txdesc: txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); err_rxdesc: rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); - dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl, pl022->sgt_tx.nents, DMA_TO_DEVICE); err_tx_sgmap: - dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl, pl022->sgt_tx.nents, DMA_FROM_DEVICE); err_rx_sgmap: sg_free_table(&pl022->sgt_tx); @@ -1460,8 +1455,8 @@ static void pump_messages(struct work_struct *work) /* Lock queue and check for queue work */ spin_lock_irqsave(&pl022->queue_lock, flags); - if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) { - pl022->busy = 0; + if (list_empty(&pl022->queue) || !pl022->running) { + pl022->busy = false; spin_unlock_irqrestore(&pl022->queue_lock, flags); return; } @@ -1475,7 +1470,7 @@ static void pump_messages(struct work_struct *work) list_entry(pl022->queue.next, struct spi_message, queue); list_del_init(&pl022->cur_msg->queue); - pl022->busy = 1; + pl022->busy = true; spin_unlock_irqrestore(&pl022->queue_lock, flags); /* Initial message state */ @@ -1507,8 +1502,8 @@ static int __init init_queue(struct pl022 *pl022) INIT_LIST_HEAD(&pl022->queue); spin_lock_init(&pl022->queue_lock); - pl022->run = QUEUE_STOPPED; - pl022->busy = 0; + pl022->running = false; + pl022->busy = false; tasklet_init(&pl022->pump_transfers, pump_transfers, (unsigned long)pl022); @@ -1529,12 +1524,12 @@ static int start_queue(struct pl022 *pl022) spin_lock_irqsave(&pl022->queue_lock, flags); - if (pl022->run == QUEUE_RUNNING || pl022->busy) { + if (pl022->running || pl022->busy) { spin_unlock_irqrestore(&pl022->queue_lock, flags); return -EBUSY; } - pl022->run = QUEUE_RUNNING; + pl022->running = true; pl022->cur_msg = NULL; pl022->cur_transfer = NULL; pl022->cur_chip = NULL; @@ -1566,7 +1561,8 @@ static int stop_queue(struct pl022 *pl022) if (!list_empty(&pl022->queue) || pl022->busy) status = -EBUSY; - else pl022->run = QUEUE_STOPPED; + else + pl022->running = false; spin_unlock_irqrestore(&pl022->queue_lock, flags); @@ -1684,7 +1680,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) spin_lock_irqsave(&pl022->queue_lock, flags); - if (pl022->run == QUEUE_STOPPED) { + if (!pl022->running) { spin_unlock_irqrestore(&pl022->queue_lock, flags); return -ESHUTDOWN; } @@ -1693,7 +1689,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) msg->state = STATE_START; list_add_tail(&msg->queue, &pl022->queue); - if (pl022->run == QUEUE_RUNNING && !pl022->busy) + if (pl022->running && !pl022->busy) queue_work(pl022->workqueue, &pl022->pump_messages); spin_unlock_irqrestore(&pl022->queue_lock, flags); diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index b85090c..6beab99 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2009 Texas Instruments. + * Copyright (C) 2010 EF Johnson Technologies * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -38,11 +39,6 @@ #define CS_DEFAULT 0xFF -#define SPI_BUFSIZ (SMP_CACHE_BYTES + 1) -#define DAVINCI_DMA_DATA_TYPE_S8 0x01 -#define DAVINCI_DMA_DATA_TYPE_S16 0x02 -#define DAVINCI_DMA_DATA_TYPE_S32 0x04 - #define SPIFMT_PHASE_MASK BIT(16) #define SPIFMT_POLARITY_MASK BIT(17) #define SPIFMT_DISTIMER_MASK BIT(18) @@ -52,34 +48,43 @@ #define SPIFMT_ODD_PARITY_MASK BIT(23) #define SPIFMT_WDELAY_MASK 0x3f000000u #define SPIFMT_WDELAY_SHIFT 24 -#define SPIFMT_CHARLEN_MASK 0x0000001Fu - -/* SPIGCR1 */ -#define SPIGCR1_SPIENA_MASK 0x01000000u +#define SPIFMT_PRESCALE_SHIFT 8 /* SPIPC0 */ #define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ #define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ #define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ #define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ -#define SPIPC0_EN1FUN_MASK BIT(1) -#define SPIPC0_EN0FUN_MASK BIT(0) #define SPIINT_MASKALL 0x0101035F -#define SPI_INTLVL_1 0x000001FFu -#define SPI_INTLVL_0 0x00000000u +#define SPIINT_MASKINT 0x0000015F +#define SPI_INTLVL_1 0x000001FF +#define SPI_INTLVL_0 0x00000000 -/* SPIDAT1 */ -#define SPIDAT1_CSHOLD_SHIFT 28 -#define SPIDAT1_CSNR_SHIFT 16 +/* SPIDAT1 (upper 16 bit defines) */ +#define SPIDAT1_CSHOLD_MASK BIT(12) + +/* SPIGCR1 */ #define SPIGCR1_CLKMOD_MASK BIT(1) #define SPIGCR1_MASTER_MASK BIT(0) +#define SPIGCR1_POWERDOWN_MASK BIT(8) #define SPIGCR1_LOOPBACK_MASK BIT(16) +#define SPIGCR1_SPIENA_MASK BIT(24) /* SPIBUF */ #define SPIBUF_TXFULL_MASK BIT(29) #define SPIBUF_RXEMPTY_MASK BIT(31) +/* SPIDELAY */ +#define SPIDELAY_C2TDELAY_SHIFT 24 +#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT) +#define SPIDELAY_T2CDELAY_SHIFT 16 +#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT) +#define SPIDELAY_T2EDELAY_SHIFT 8 +#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT) +#define SPIDELAY_C2EDELAY_SHIFT 0 +#define SPIDELAY_C2EDELAY_MASK 0xFF + /* Error Masks */ #define SPIFLG_DLEN_ERR_MASK BIT(0) #define SPIFLG_TIMEOUT_MASK BIT(1) @@ -87,29 +92,13 @@ #define SPIFLG_DESYNC_MASK BIT(3) #define SPIFLG_BITERR_MASK BIT(4) #define SPIFLG_OVRRUN_MASK BIT(6) -#define SPIFLG_RX_INTR_MASK BIT(8) -#define SPIFLG_TX_INTR_MASK BIT(9) #define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) -#define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \ +#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \ | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ - | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \ - | SPIFLG_TX_INTR_MASK \ - | SPIFLG_BUF_INIT_ACTIVE_MASK) - -#define SPIINT_DLEN_ERR_INTR BIT(0) -#define SPIINT_TIMEOUT_INTR BIT(1) -#define SPIINT_PARERR_INTR BIT(2) -#define SPIINT_DESYNC_INTR BIT(3) -#define SPIINT_BITERR_INTR BIT(4) -#define SPIINT_OVRRUN_INTR BIT(6) -#define SPIINT_RX_INTR BIT(8) -#define SPIINT_TX_INTR BIT(9) -#define SPIINT_DMA_REQ_EN BIT(16) -#define SPIINT_ENABLE_HIGHZ BIT(24) + | SPIFLG_OVRRUN_MASK) -#define SPI_T2CDELAY_SHIFT 16 -#define SPI_C2TDELAY_SHIFT 24 +#define SPIINT_DMA_REQ_EN BIT(16) /* SPI Controller registers */ #define SPIGCR0 0x00 @@ -118,44 +107,18 @@ #define SPILVL 0x0c #define SPIFLG 0x10 #define SPIPC0 0x14 -#define SPIPC1 0x18 -#define SPIPC2 0x1c -#define SPIPC3 0x20 -#define SPIPC4 0x24 -#define SPIPC5 0x28 -#define SPIPC6 0x2c -#define SPIPC7 0x30 -#define SPIPC8 0x34 -#define SPIDAT0 0x38 #define SPIDAT1 0x3c #define SPIBUF 0x40 -#define SPIEMU 0x44 #define SPIDELAY 0x48 #define SPIDEF 0x4c #define SPIFMT0 0x50 -#define SPIFMT1 0x54 -#define SPIFMT2 0x58 -#define SPIFMT3 0x5c -#define TGINTVEC0 0x60 -#define TGINTVEC1 0x64 - -struct davinci_spi_slave { - u32 cmd_to_write; - u32 clk_ctrl_to_write; - u32 bytes_per_word; - u8 active_cs; -}; /* We have 2 DMA channels per CS, one for RX and one for TX */ struct davinci_spi_dma { - int dma_tx_channel; - int dma_rx_channel; - int dma_tx_sync_dev; - int dma_rx_sync_dev; + int tx_channel; + int rx_channel; + int dummy_param_slot; enum dma_event_q eventq; - - struct completion dma_tx_completion; - struct completion dma_rx_completion; }; /* SPI Controller driver's private data. */ @@ -166,58 +129,63 @@ struct davinci_spi { u8 version; resource_size_t pbase; void __iomem *base; - size_t region_size; u32 irq; struct completion done; const void *tx; void *rx; - u8 *tmp_buf; - int count; - struct davinci_spi_dma *dma_channels; - struct davinci_spi_platform_data *pdata; +#define SPI_TMP_BUFSZ (SMP_CACHE_BYTES + 1) + u8 rx_tmp_buf[SPI_TMP_BUFSZ]; + int rcount; + int wcount; + struct davinci_spi_dma dma; + struct davinci_spi_platform_data *pdata; void (*get_rx)(u32 rx_data, struct davinci_spi *); u32 (*get_tx)(struct davinci_spi *); - struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT]; + u8 bytes_per_word[SPI_MAX_CHIPSELECT]; }; -static unsigned use_dma; +static struct davinci_spi_config davinci_spi_default_cfg; -static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi) +static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi) { - u8 *rx = davinci_spi->rx; - - *rx++ = (u8)data; - davinci_spi->rx = rx; + if (dspi->rx) { + u8 *rx = dspi->rx; + *rx++ = (u8)data; + dspi->rx = rx; + } } -static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi) +static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi) { - u16 *rx = davinci_spi->rx; - - *rx++ = (u16)data; - davinci_spi->rx = rx; + if (dspi->rx) { + u16 *rx = dspi->rx; + *rx++ = (u16)data; + dspi->rx = rx; + } } -static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi) +static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi) { - u32 data; - const u8 *tx = davinci_spi->tx; - - data = *tx++; - davinci_spi->tx = tx; + u32 data = 0; + if (dspi->tx) { + const u8 *tx = dspi->tx; + data = *tx++; + dspi->tx = tx; + } return data; } -static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi) +static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi) { - u32 data; - const u16 *tx = davinci_spi->tx; - - data = *tx++; - davinci_spi->tx = tx; + u32 data = 0; + if (dspi->tx) { + const u16 *tx = dspi->tx; + data = *tx++; + dspi->tx = tx; + } return data; } @@ -237,55 +205,67 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits) iowrite32(v, addr); } -static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num) -{ - set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); -} - -static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num) -{ - clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); -} - -static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) -{ - struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); - - if (enable) - set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); - else - clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); -} - /* * Interface to control the chip select signal */ static void davinci_spi_chipselect(struct spi_device *spi, int value) { - struct davinci_spi *davinci_spi; + struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; - u32 data1_reg_val = 0; + u8 chip_sel = spi->chip_select; + u16 spidat1 = CS_DEFAULT; + bool gpio_chipsel = false; - davinci_spi = spi_master_get_devdata(spi->master); - pdata = davinci_spi->pdata; + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; + + if (pdata->chip_sel && chip_sel < pdata->num_chipselect && + pdata->chip_sel[chip_sel] != SPI_INTERN_CS) + gpio_chipsel = true; /* * Board specific chip select logic decides the polarity and cs * line for the controller */ - if (value == BITBANG_CS_INACTIVE) { - set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT); - - data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT; - iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + if (gpio_chipsel) { + if (value == BITBANG_CS_ACTIVE) + gpio_set_value(pdata->chip_sel[chip_sel], 0); + else + gpio_set_value(pdata->chip_sel[chip_sel], 1); + } else { + if (value == BITBANG_CS_ACTIVE) { + spidat1 |= SPIDAT1_CSHOLD_MASK; + spidat1 &= ~(0x1 << chip_sel); + } - while ((ioread32(davinci_spi->base + SPIBUF) - & SPIBUF_RXEMPTY_MASK) == 0) - cpu_relax(); + iowrite16(spidat1, dspi->base + SPIDAT1 + 2); } } /** + * davinci_spi_get_prescale - Calculates the correct prescale value + * @maxspeed_hz: the maximum rate the SPI clock can run at + * + * This function calculates the prescale value that generates a clock rate + * less than or equal to the specified maximum. + * + * Returns: calculated prescale - 1 for easy programming into SPI registers + * or negative error number if valid prescalar cannot be updated. + */ +static inline int davinci_spi_get_prescale(struct davinci_spi *dspi, + u32 max_speed_hz) +{ + int ret; + + ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz); + + if (ret < 3 || ret > 256) + return -EINVAL; + + return ret - 1; +} + +/** * davinci_spi_setup_transfer - This functions will determine transfer method * @spi: spi device on which data transfer to be done * @t: spi transfer in which transfer info is filled @@ -298,13 +278,15 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { - struct davinci_spi *davinci_spi; - struct davinci_spi_platform_data *pdata; + struct davinci_spi *dspi; + struct davinci_spi_config *spicfg; u8 bits_per_word = 0; - u32 hz = 0, prescale = 0, clkspeed; + u32 hz = 0, spifmt = 0, prescale = 0; - davinci_spi = spi_master_get_devdata(spi->master); - pdata = davinci_spi->pdata; + dspi = spi_master_get_devdata(spi->master); + spicfg = (struct davinci_spi_config *)spi->controller_data; + if (!spicfg) + spicfg = &davinci_spi_default_cfg; if (t) { bits_per_word = t->bits_per_word; @@ -320,111 +302,83 @@ static int davinci_spi_setup_transfer(struct spi_device *spi, * 8bit, 16bit or 32bit transfer */ if (bits_per_word <= 8 && bits_per_word >= 2) { - davinci_spi->get_rx = davinci_spi_rx_buf_u8; - davinci_spi->get_tx = davinci_spi_tx_buf_u8; - davinci_spi->slave[spi->chip_select].bytes_per_word = 1; + dspi->get_rx = davinci_spi_rx_buf_u8; + dspi->get_tx = davinci_spi_tx_buf_u8; + dspi->bytes_per_word[spi->chip_select] = 1; } else if (bits_per_word <= 16 && bits_per_word >= 2) { - davinci_spi->get_rx = davinci_spi_rx_buf_u16; - davinci_spi->get_tx = davinci_spi_tx_buf_u16; - davinci_spi->slave[spi->chip_select].bytes_per_word = 2; + dspi->get_rx = davinci_spi_rx_buf_u16; + dspi->get_tx = davinci_spi_tx_buf_u16; + dspi->bytes_per_word[spi->chip_select] = 2; } else return -EINVAL; if (!hz) hz = spi->max_speed_hz; - clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK, - spi->chip_select); - set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f, - spi->chip_select); + /* Set up SPIFMTn register, unique to this chipselect. */ - clkspeed = clk_get_rate(davinci_spi->clk); - if (hz > clkspeed / 2) - prescale = 1 << 8; - if (hz < clkspeed / 256) - prescale = 255 << 8; - if (!prescale) - prescale = ((clkspeed / hz - 1) << 8) & 0x0000ff00; + prescale = davinci_spi_get_prescale(dspi, hz); + if (prescale < 0) + return prescale; - clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select); - set_fmt_bits(davinci_spi->base, prescale, spi->chip_select); + spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f); - return 0; -} + if (spi->mode & SPI_LSB_FIRST) + spifmt |= SPIFMT_SHIFTDIR_MASK; -static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) -{ - struct spi_device *spi = (struct spi_device *)data; - struct davinci_spi *davinci_spi; - struct davinci_spi_dma *davinci_spi_dma; - struct davinci_spi_platform_data *pdata; + if (spi->mode & SPI_CPOL) + spifmt |= SPIFMT_POLARITY_MASK; - davinci_spi = spi_master_get_devdata(spi->master); - davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); - pdata = davinci_spi->pdata; + if (!(spi->mode & SPI_CPHA)) + spifmt |= SPIFMT_PHASE_MASK; - if (ch_status == DMA_COMPLETE) - edma_stop(davinci_spi_dma->dma_rx_channel); - else - edma_clean_channel(davinci_spi_dma->dma_rx_channel); + /* + * Version 1 hardware supports two basic SPI modes: + * - Standard SPI mode uses 4 pins, with chipselect + * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) + * (distinct from SPI_3WIRE, with just one data wire; + * or similar variants without MOSI or without MISO) + * + * Version 2 hardware supports an optional handshaking signal, + * so it can support two more modes: + * - 5 pin SPI variant is standard SPI plus SPI_READY + * - 4 pin with enable is (SPI_READY | SPI_NO_CS) + */ - complete(&davinci_spi_dma->dma_rx_completion); - /* We must disable the DMA RX request */ - davinci_spi_set_dma_req(spi, 0); -} + if (dspi->version == SPI_VERSION_2) { -static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) -{ - struct spi_device *spi = (struct spi_device *)data; - struct davinci_spi *davinci_spi; - struct davinci_spi_dma *davinci_spi_dma; - struct davinci_spi_platform_data *pdata; + u32 delay = 0; - davinci_spi = spi_master_get_devdata(spi->master); - davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); - pdata = davinci_spi->pdata; + spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK); - if (ch_status == DMA_COMPLETE) - edma_stop(davinci_spi_dma->dma_tx_channel); - else - edma_clean_channel(davinci_spi_dma->dma_tx_channel); + if (spicfg->odd_parity) + spifmt |= SPIFMT_ODD_PARITY_MASK; - complete(&davinci_spi_dma->dma_tx_completion); - /* We must disable the DMA TX request */ - davinci_spi_set_dma_req(spi, 0); -} + if (spicfg->parity_enable) + spifmt |= SPIFMT_PARITYENA_MASK; -static int davinci_spi_request_dma(struct spi_device *spi) -{ - struct davinci_spi *davinci_spi; - struct davinci_spi_dma *davinci_spi_dma; - struct davinci_spi_platform_data *pdata; - struct device *sdev; - int r; + if (spicfg->timer_disable) { + spifmt |= SPIFMT_DISTIMER_MASK; + } else { + delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT) + & SPIDELAY_C2TDELAY_MASK; + delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT) + & SPIDELAY_T2CDELAY_MASK; + } - davinci_spi = spi_master_get_devdata(spi->master); - davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; - pdata = davinci_spi->pdata; - sdev = davinci_spi->bitbang.master->dev.parent; + if (spi->mode & SPI_READY) { + spifmt |= SPIFMT_WAITENA_MASK; + delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT) + & SPIDELAY_T2EDELAY_MASK; + delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT) + & SPIDELAY_C2EDELAY_MASK; + } - r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev, - davinci_spi_dma_rx_callback, spi, - davinci_spi_dma->eventq); - if (r < 0) { - dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n"); - return -EAGAIN; + iowrite32(delay, dspi->base + SPIDELAY); } - davinci_spi_dma->dma_rx_channel = r; - r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev, - davinci_spi_dma_tx_callback, spi, - davinci_spi_dma->eventq); - if (r < 0) { - edma_free_channel(davinci_spi_dma->dma_rx_channel); - davinci_spi_dma->dma_rx_channel = -1; - dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n"); - return -EAGAIN; - } - davinci_spi_dma->dma_tx_channel = r; + + iowrite32(spifmt, dspi->base + SPIFMT0); return 0; } @@ -435,190 +389,40 @@ static int davinci_spi_request_dma(struct spi_device *spi) * * This functions sets the default transfer method. */ - static int davinci_spi_setup(struct spi_device *spi) { - int retval; - struct davinci_spi *davinci_spi; - struct davinci_spi_dma *davinci_spi_dma; - struct device *sdev; + int retval = 0; + struct davinci_spi *dspi; + struct davinci_spi_platform_data *pdata; - davinci_spi = spi_master_get_devdata(spi->master); - sdev = davinci_spi->bitbang.master->dev.parent; + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; /* if bits per word length is zero then set it default 8 */ if (!spi->bits_per_word) spi->bits_per_word = 8; - davinci_spi->slave[spi->chip_select].cmd_to_write = 0; - - if (use_dma && davinci_spi->dma_channels) { - davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; - - if ((davinci_spi_dma->dma_rx_channel == -1) - || (davinci_spi_dma->dma_tx_channel == -1)) { - retval = davinci_spi_request_dma(spi); - if (retval < 0) - return retval; - } - } - - /* - * SPI in DaVinci and DA8xx operate between - * 600 KHz and 50 MHz - */ - if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) { - dev_dbg(sdev, "Operating frequency is not in acceptable " - "range\n"); - return -EINVAL; - } - - /* - * Set up SPIFMTn register, unique to this chipselect. - * - * NOTE: we could do all of these with one write. Also, some - * of the "version 2" features are found in chips that don't - * support all of them... - */ - if (spi->mode & SPI_LSB_FIRST) - set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, - spi->chip_select); - - if (spi->mode & SPI_CPOL) - set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, - spi->chip_select); + if (!(spi->mode & SPI_NO_CS)) { + if ((pdata->chip_sel == NULL) || + (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS)) + set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select); - if (!(spi->mode & SPI_CPHA)) - set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, - spi->chip_select); - - /* - * Version 1 hardware supports two basic SPI modes: - * - Standard SPI mode uses 4 pins, with chipselect - * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) - * (distinct from SPI_3WIRE, with just one data wire; - * or similar variants without MOSI or without MISO) - * - * Version 2 hardware supports an optional handshaking signal, - * so it can support two more modes: - * - 5 pin SPI variant is standard SPI plus SPI_READY - * - 4 pin with enable is (SPI_READY | SPI_NO_CS) - */ - - if (davinci_spi->version == SPI_VERSION_2) { - clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK, - spi->chip_select); - set_fmt_bits(davinci_spi->base, - (davinci_spi->pdata->wdelay - << SPIFMT_WDELAY_SHIFT) - & SPIFMT_WDELAY_MASK, - spi->chip_select); - - if (davinci_spi->pdata->odd_parity) - set_fmt_bits(davinci_spi->base, - SPIFMT_ODD_PARITY_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, - SPIFMT_ODD_PARITY_MASK, - spi->chip_select); - - if (davinci_spi->pdata->parity_enable) - set_fmt_bits(davinci_spi->base, - SPIFMT_PARITYENA_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, - SPIFMT_PARITYENA_MASK, - spi->chip_select); - - if (davinci_spi->pdata->wait_enable) - set_fmt_bits(davinci_spi->base, - SPIFMT_WAITENA_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, - SPIFMT_WAITENA_MASK, - spi->chip_select); - - if (davinci_spi->pdata->timer_disable) - set_fmt_bits(davinci_spi->base, - SPIFMT_DISTIMER_MASK, - spi->chip_select); - else - clear_fmt_bits(davinci_spi->base, - SPIFMT_DISTIMER_MASK, - spi->chip_select); } - retval = davinci_spi_setup_transfer(spi, NULL); - - return retval; -} - -static void davinci_spi_cleanup(struct spi_device *spi) -{ - struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); - struct davinci_spi_dma *davinci_spi_dma; - - davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; - - if (use_dma && davinci_spi->dma_channels) { - davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; - - if ((davinci_spi_dma->dma_rx_channel != -1) - && (davinci_spi_dma->dma_tx_channel != -1)) { - edma_free_channel(davinci_spi_dma->dma_tx_channel); - edma_free_channel(davinci_spi_dma->dma_rx_channel); - } - } -} - -static int davinci_spi_bufs_prep(struct spi_device *spi, - struct davinci_spi *davinci_spi) -{ - int op_mode = 0; - - /* - * REVISIT unless devices disagree about SPI_LOOP or - * SPI_READY (SPI_NO_CS only allows one device!), this - * should not need to be done before each message... - * optimize for both flags staying cleared. - */ - - op_mode = SPIPC0_DIFUN_MASK - | SPIPC0_DOFUN_MASK - | SPIPC0_CLKFUN_MASK; - if (!(spi->mode & SPI_NO_CS)) - op_mode |= 1 << spi->chip_select; if (spi->mode & SPI_READY) - op_mode |= SPIPC0_SPIENA_MASK; - - iowrite32(op_mode, davinci_spi->base + SPIPC0); + set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK); if (spi->mode & SPI_LOOP) - set_io_bits(davinci_spi->base + SPIGCR1, - SPIGCR1_LOOPBACK_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); else - clear_io_bits(davinci_spi->base + SPIGCR1, - SPIGCR1_LOOPBACK_MASK); + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK); - return 0; + return retval; } -static int davinci_spi_check_error(struct davinci_spi *davinci_spi, - int int_status) +static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status) { - struct device *sdev = davinci_spi->bitbang.master->dev.parent; + struct device *sdev = dspi->bitbang.master->dev.parent; if (int_status & SPIFLG_TIMEOUT_MASK) { dev_dbg(sdev, "SPI Time-out Error\n"); @@ -633,7 +437,7 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi, return -EIO; } - if (davinci_spi->version == SPI_VERSION_2) { + if (dspi->version == SPI_VERSION_2) { if (int_status & SPIFLG_DLEN_ERR_MASK) { dev_dbg(sdev, "SPI Data Length Error\n"); return -EIO; @@ -646,10 +450,6 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi, dev_dbg(sdev, "SPI Data Overrun error\n"); return -EIO; } - if (int_status & SPIFLG_TX_INTR_MASK) { - dev_dbg(sdev, "SPI TX intr bit set\n"); - return -EIO; - } if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { dev_dbg(sdev, "SPI Buffer Init Active\n"); return -EBUSY; @@ -660,366 +460,339 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi, } /** - * davinci_spi_bufs - functions which will handle transfer data - * @spi: spi device on which data transfer to be done - * @t: spi transfer in which transfer info is filled + * davinci_spi_process_events - check for and handle any SPI controller events + * @dspi: the controller data * - * This function will put data to be transferred into data register - * of SPI controller and then wait until the completion will be marked - * by the IRQ Handler. + * This function will check the SPIFLG register and handle any events that are + * detected there */ -static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t) +static int davinci_spi_process_events(struct davinci_spi *dspi) { - struct davinci_spi *davinci_spi; - int int_status, count, ret; - u8 conv, tmp; - u32 tx_data, data1_reg_val; - u32 buf_val, flg_val; - struct davinci_spi_platform_data *pdata; - - davinci_spi = spi_master_get_devdata(spi->master); - pdata = davinci_spi->pdata; - - davinci_spi->tx = t->tx_buf; - davinci_spi->rx = t->rx_buf; - - /* convert len to words based on bits_per_word */ - conv = davinci_spi->slave[spi->chip_select].bytes_per_word; - davinci_spi->count = t->len / conv; - - INIT_COMPLETION(davinci_spi->done); - - ret = davinci_spi_bufs_prep(spi, davinci_spi); - if (ret) - return ret; - - /* Enable SPI */ - set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - - iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | - (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), - davinci_spi->base + SPIDELAY); - - count = davinci_spi->count; - data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; - tmp = ~(0x1 << spi->chip_select); - - clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); - - data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; + u32 buf, status, errors = 0, spidat1; - while ((ioread32(davinci_spi->base + SPIBUF) - & SPIBUF_RXEMPTY_MASK) == 0) - cpu_relax(); + buf = ioread32(dspi->base + SPIBUF); - /* Determine the command to execute READ or WRITE */ - if (t->tx_buf) { - clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); + if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) { + dspi->get_rx(buf & 0xFFFF, dspi); + dspi->rcount--; + } - while (1) { - tx_data = davinci_spi->get_tx(davinci_spi); + status = ioread32(dspi->base + SPIFLG); - data1_reg_val &= ~(0xFFFF); - data1_reg_val |= (0xFFFF & tx_data); + if (unlikely(status & SPIFLG_ERROR_MASK)) { + errors = status & SPIFLG_ERROR_MASK; + goto out; + } - buf_val = ioread32(davinci_spi->base + SPIBUF); - if ((buf_val & SPIBUF_TXFULL_MASK) == 0) { - iowrite32(data1_reg_val, - davinci_spi->base + SPIDAT1); + if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) { + spidat1 = ioread32(dspi->base + SPIDAT1); + dspi->wcount--; + spidat1 &= ~0xFFFF; + spidat1 |= 0xFFFF & dspi->get_tx(dspi); + iowrite32(spidat1, dspi->base + SPIDAT1); + } - count--; - } - while (ioread32(davinci_spi->base + SPIBUF) - & SPIBUF_RXEMPTY_MASK) - cpu_relax(); - - /* getting the returned byte */ - if (t->rx_buf) { - buf_val = ioread32(davinci_spi->base + SPIBUF); - davinci_spi->get_rx(buf_val, davinci_spi); - } - if (count <= 0) - break; - } - } else { - if (pdata->poll_mode) { - while (1) { - /* keeps the serial clock going */ - if ((ioread32(davinci_spi->base + SPIBUF) - & SPIBUF_TXFULL_MASK) == 0) - iowrite32(data1_reg_val, - davinci_spi->base + SPIDAT1); - - while (ioread32(davinci_spi->base + SPIBUF) & - SPIBUF_RXEMPTY_MASK) - cpu_relax(); - - flg_val = ioread32(davinci_spi->base + SPIFLG); - buf_val = ioread32(davinci_spi->base + SPIBUF); - - davinci_spi->get_rx(buf_val, davinci_spi); - - count--; - if (count <= 0) - break; - } - } else { /* Receive in Interrupt mode */ - int i; +out: + return errors; +} - for (i = 0; i < davinci_spi->count; i++) { - set_io_bits(davinci_spi->base + SPIINT, - SPIINT_BITERR_INTR - | SPIINT_OVRRUN_INTR - | SPIINT_RX_INTR); +static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data) +{ + struct davinci_spi *dspi = data; + struct davinci_spi_dma *dma = &dspi->dma; - iowrite32(data1_reg_val, - davinci_spi->base + SPIDAT1); + edma_stop(lch); - while (ioread32(davinci_spi->base + SPIINT) & - SPIINT_RX_INTR) - cpu_relax(); - } - iowrite32((data1_reg_val & 0x0ffcffff), - davinci_spi->base + SPIDAT1); - } + if (status == DMA_COMPLETE) { + if (lch == dma->rx_channel) + dspi->rcount = 0; + if (lch == dma->tx_channel) + dspi->wcount = 0; } - /* - * Check for bit error, desync error,parity error,timeout error and - * receive overflow errors - */ - int_status = ioread32(davinci_spi->base + SPIFLG); - - ret = davinci_spi_check_error(davinci_spi, int_status); - if (ret != 0) - return ret; - - /* SPI Framework maintains the count only in bytes so convert back */ - davinci_spi->count *= conv; - - return t->len; + if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE)) + complete(&dspi->done); } -#define DAVINCI_DMA_DATA_TYPE_S8 0x01 -#define DAVINCI_DMA_DATA_TYPE_S16 0x02 -#define DAVINCI_DMA_DATA_TYPE_S32 0x04 - -static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) +/** + * davinci_spi_bufs - functions which will handle transfer data + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function will put data to be transferred into data register + * of SPI controller and then wait until the completion will be marked + * by the IRQ Handler. + */ +static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t) { - struct davinci_spi *davinci_spi; - int int_status = 0; - int count, temp_count; - u8 conv = 1; - u8 tmp; - u32 data1_reg_val; - struct davinci_spi_dma *davinci_spi_dma; - int word_len, data_type, ret; - unsigned long tx_reg, rx_reg; + struct davinci_spi *dspi; + int data_type, ret; + u32 tx_data, spidat1; + u32 errors = 0; + struct davinci_spi_config *spicfg; struct davinci_spi_platform_data *pdata; + unsigned uninitialized_var(rx_buf_count); struct device *sdev; - davinci_spi = spi_master_get_devdata(spi->master); - pdata = davinci_spi->pdata; - sdev = davinci_spi->bitbang.master->dev.parent; - - davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; - - tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1; - rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF; - - davinci_spi->tx = t->tx_buf; - davinci_spi->rx = t->rx_buf; + dspi = spi_master_get_devdata(spi->master); + pdata = dspi->pdata; + spicfg = (struct davinci_spi_config *)spi->controller_data; + if (!spicfg) + spicfg = &davinci_spi_default_cfg; + sdev = dspi->bitbang.master->dev.parent; /* convert len to words based on bits_per_word */ - conv = davinci_spi->slave[spi->chip_select].bytes_per_word; - davinci_spi->count = t->len / conv; - - INIT_COMPLETION(davinci_spi->done); + data_type = dspi->bytes_per_word[spi->chip_select]; - init_completion(&davinci_spi_dma->dma_rx_completion); - init_completion(&davinci_spi_dma->dma_tx_completion); + dspi->tx = t->tx_buf; + dspi->rx = t->rx_buf; + dspi->wcount = t->len / data_type; + dspi->rcount = dspi->wcount; - word_len = conv * 8; - - if (word_len <= 8) - data_type = DAVINCI_DMA_DATA_TYPE_S8; - else if (word_len <= 16) - data_type = DAVINCI_DMA_DATA_TYPE_S16; - else if (word_len <= 32) - data_type = DAVINCI_DMA_DATA_TYPE_S32; - else - return -EINVAL; - - ret = davinci_spi_bufs_prep(spi, davinci_spi); - if (ret) - return ret; + spidat1 = ioread32(dspi->base + SPIDAT1); - /* Put delay val if required */ - iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | - (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), - davinci_spi->base + SPIDELAY); + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - count = davinci_spi->count; /* the number of elements */ - data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; + INIT_COMPLETION(dspi->done); - /* CS default = 0xFF */ - tmp = ~(0x1 << spi->chip_select); + if (spicfg->io_type == SPI_IO_TYPE_INTR) + set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); - clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); - - data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; - - /* disable all interrupts for dma transfers */ - clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); - /* Disable SPI to write configuration bits in SPIDAT */ - clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); - /* Enable SPI */ - set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); - - while ((ioread32(davinci_spi->base + SPIBUF) - & SPIBUF_RXEMPTY_MASK) == 0) - cpu_relax(); - - - if (t->tx_buf) { - t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count, - DMA_TO_DEVICE); - if (dma_mapping_error(&spi->dev, t->tx_dma)) { - dev_dbg(sdev, "Unable to DMA map a %d bytes" - " TX buffer\n", count); - return -ENOMEM; - } - temp_count = count; + if (spicfg->io_type != SPI_IO_TYPE_DMA) { + /* start the transfer */ + dspi->wcount--; + tx_data = dspi->get_tx(dspi); + spidat1 &= 0xFFFF0000; + spidat1 |= tx_data & 0xFFFF; + iowrite32(spidat1, dspi->base + SPIDAT1); } else { - /* We need TX clocking for RX transaction */ - t->tx_dma = dma_map_single(&spi->dev, - (void *)davinci_spi->tmp_buf, count + 1, - DMA_TO_DEVICE); - if (dma_mapping_error(&spi->dev, t->tx_dma)) { - dev_dbg(sdev, "Unable to DMA map a %d bytes" - " TX tmp buffer\n", count); - return -ENOMEM; + struct davinci_spi_dma *dma; + unsigned long tx_reg, rx_reg; + struct edmacc_param param; + void *rx_buf; + + dma = &dspi->dma; + + tx_reg = (unsigned long)dspi->pbase + SPIDAT1; + rx_reg = (unsigned long)dspi->pbase + SPIBUF; + + /* + * Transmit DMA setup + * + * If there is transmit data, map the transmit buffer, set it + * as the source of data and set the source B index to data + * size. If there is no transmit data, set the transmit register + * as the source of data, and set the source B index to zero. + * + * The destination is always the transmit register itself. And + * the destination never increments. + */ + + if (t->tx_buf) { + t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, + dspi->wcount, DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map %d bytes" + "TX buffer\n", dspi->wcount); + return -ENOMEM; + } } - temp_count = count + 1; - } - edma_set_transfer_params(davinci_spi_dma->dma_tx_channel, - data_type, temp_count, 1, 0, ASYNC); - edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT); - edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT); - edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0); - edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0); - - if (t->rx_buf) { - /* initiate transaction */ - iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + param.opt = TCINTEN | EDMA_TCC(dma->tx_channel); + param.src = t->tx_buf ? t->tx_dma : tx_reg; + param.a_b_cnt = dspi->wcount << 16 | data_type; + param.dst = tx_reg; + param.src_dst_bidx = t->tx_buf ? data_type : 0; + param.link_bcntrld = 0xffff; + param.src_dst_cidx = 0; + param.ccnt = 1; + edma_write_slot(dma->tx_channel, ¶m); + edma_link(dma->tx_channel, dma->dummy_param_slot); + + /* + * Receive DMA setup + * + * If there is receive buffer, use it to receive data. If there + * is none provided, use a temporary receive buffer. Set the + * destination B index to 0 so effectively only one byte is used + * in the temporary buffer (address does not increment). + * + * The source of receive data is the receive data register. The + * source address never increments. + */ + + if (t->rx_buf) { + rx_buf = t->rx_buf; + rx_buf_count = dspi->rcount; + } else { + rx_buf = dspi->rx_tmp_buf; + rx_buf_count = sizeof(dspi->rx_tmp_buf); + } - t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count, - DMA_FROM_DEVICE); + t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count, + DMA_FROM_DEVICE); if (dma_mapping_error(&spi->dev, t->rx_dma)) { dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", - count); - if (t->tx_buf != NULL) - dma_unmap_single(NULL, t->tx_dma, - count, DMA_TO_DEVICE); + rx_buf_count); + if (t->tx_buf) + dma_unmap_single(NULL, t->tx_dma, dspi->wcount, + DMA_TO_DEVICE); return -ENOMEM; } - edma_set_transfer_params(davinci_spi_dma->dma_rx_channel, - data_type, count, 1, 0, ASYNC); - edma_set_src(davinci_spi_dma->dma_rx_channel, - rx_reg, INCR, W8BIT); - edma_set_dest(davinci_spi_dma->dma_rx_channel, - t->rx_dma, INCR, W8BIT); - edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0); - edma_set_dest_index(davinci_spi_dma->dma_rx_channel, - data_type, 0); - } - if ((t->tx_buf) || (t->rx_buf)) - edma_start(davinci_spi_dma->dma_tx_channel); + param.opt = TCINTEN | EDMA_TCC(dma->rx_channel); + param.src = rx_reg; + param.a_b_cnt = dspi->rcount << 16 | data_type; + param.dst = t->rx_dma; + param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16; + param.link_bcntrld = 0xffff; + param.src_dst_cidx = 0; + param.ccnt = 1; + edma_write_slot(dma->rx_channel, ¶m); + + if (pdata->cshold_bug) + iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2); + + edma_start(dma->rx_channel); + edma_start(dma->tx_channel); + set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); + } - if (t->rx_buf) - edma_start(davinci_spi_dma->dma_rx_channel); + /* Wait for the transfer to complete */ + if (spicfg->io_type != SPI_IO_TYPE_POLL) { + wait_for_completion_interruptible(&(dspi->done)); + } else { + while (dspi->rcount > 0 || dspi->wcount > 0) { + errors = davinci_spi_process_events(dspi); + if (errors) + break; + cpu_relax(); + } + } - if ((t->rx_buf) || (t->tx_buf)) - davinci_spi_set_dma_req(spi, 1); + clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL); + if (spicfg->io_type == SPI_IO_TYPE_DMA) { - if (t->tx_buf) - wait_for_completion_interruptible( - &davinci_spi_dma->dma_tx_completion); + if (t->tx_buf) + dma_unmap_single(NULL, t->tx_dma, dspi->wcount, + DMA_TO_DEVICE); - if (t->rx_buf) - wait_for_completion_interruptible( - &davinci_spi_dma->dma_rx_completion); + dma_unmap_single(NULL, t->rx_dma, rx_buf_count, + DMA_FROM_DEVICE); - dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE); + clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN); + } - if (t->rx_buf) - dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE); + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); /* * Check for bit error, desync error,parity error,timeout error and * receive overflow errors */ - int_status = ioread32(davinci_spi->base + SPIFLG); - - ret = davinci_spi_check_error(davinci_spi, int_status); - if (ret != 0) + if (errors) { + ret = davinci_spi_check_error(dspi, errors); + WARN(!ret, "%s: error reported but no error found!\n", + dev_name(&spi->dev)); return ret; + } - /* SPI Framework maintains the count only in bytes so convert back */ - davinci_spi->count *= conv; + if (dspi->rcount != 0 || dspi->wcount != 0) { + dev_err(sdev, "SPI data transfer error\n"); + return -EIO; + } return t->len; } /** - * davinci_spi_irq - IRQ handler for DaVinci SPI + * davinci_spi_irq - Interrupt handler for SPI Master Controller * @irq: IRQ number for this SPI Master * @context_data: structure for SPI Master controller davinci_spi + * + * ISR will determine that interrupt arrives either for READ or WRITE command. + * According to command it will do the appropriate action. It will check + * transfer length and if it is not zero then dispatch transfer command again. + * If transfer length is zero then it will indicate the COMPLETION so that + * davinci_spi_bufs function can go ahead. */ -static irqreturn_t davinci_spi_irq(s32 irq, void *context_data) +static irqreturn_t davinci_spi_irq(s32 irq, void *data) { - struct davinci_spi *davinci_spi = context_data; - u32 int_status, rx_data = 0; - irqreturn_t ret = IRQ_NONE; + struct davinci_spi *dspi = data; + int status; - int_status = ioread32(davinci_spi->base + SPIFLG); + status = davinci_spi_process_events(dspi); + if (unlikely(status != 0)) + clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT); - while ((int_status & SPIFLG_RX_INTR_MASK)) { - if (likely(int_status & SPIFLG_RX_INTR_MASK)) { - ret = IRQ_HANDLED; + if ((!dspi->rcount && !dspi->wcount) || status) + complete(&dspi->done); - rx_data = ioread32(davinci_spi->base + SPIBUF); - davinci_spi->get_rx(rx_data, davinci_spi); + return IRQ_HANDLED; +} - /* Disable Receive Interrupt */ - iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR), - davinci_spi->base + SPIINT); - } else - (void)davinci_spi_check_error(davinci_spi, int_status); +static int davinci_spi_request_dma(struct davinci_spi *dspi) +{ + int r; + struct davinci_spi_dma *dma = &dspi->dma; - int_status = ioread32(davinci_spi->base + SPIFLG); + r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi, + dma->eventq); + if (r < 0) { + pr_err("Unable to request DMA channel for SPI RX\n"); + r = -EAGAIN; + goto rx_dma_failed; } - return ret; + r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi, + dma->eventq); + if (r < 0) { + pr_err("Unable to request DMA channel for SPI TX\n"); + r = -EAGAIN; + goto tx_dma_failed; + } + + r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY); + if (r < 0) { + pr_err("Unable to request SPI TX DMA param slot\n"); + r = -EAGAIN; + goto param_failed; + } + dma->dummy_param_slot = r; + edma_link(dma->dummy_param_slot, dma->dummy_param_slot); + + return 0; +param_failed: + edma_free_channel(dma->tx_channel); +tx_dma_failed: + edma_free_channel(dma->rx_channel); +rx_dma_failed: + return r; } /** * davinci_spi_probe - probe function for SPI Master Controller * @pdev: platform_device structure which contains plateform specific data + * + * According to Linux Device Model this function will be invoked by Linux + * with platform_device struct which contains the device specific info. + * This function will map the SPI controller's memory, register IRQ, + * Reset SPI controller and setting its registers to default value. + * It will invoke spi_bitbang_start to create work queue so that client driver + * can register transfer method to work queue. */ static int davinci_spi_probe(struct platform_device *pdev) { struct spi_master *master; - struct davinci_spi *davinci_spi; + struct davinci_spi *dspi; struct davinci_spi_platform_data *pdata; struct resource *r, *mem; resource_size_t dma_rx_chan = SPI_NO_RESOURCE; resource_size_t dma_tx_chan = SPI_NO_RESOURCE; resource_size_t dma_eventq = SPI_NO_RESOURCE; int i = 0, ret = 0; + u32 spipc0; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -1035,8 +808,8 @@ static int davinci_spi_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, master); - davinci_spi = spi_master_get_devdata(master); - if (davinci_spi == NULL) { + dspi = spi_master_get_devdata(master); + if (dspi == NULL) { ret = -ENOENT; goto free_master; } @@ -1047,164 +820,143 @@ static int davinci_spi_probe(struct platform_device *pdev) goto free_master; } - davinci_spi->pbase = r->start; - davinci_spi->region_size = resource_size(r); - davinci_spi->pdata = pdata; + dspi->pbase = r->start; + dspi->pdata = pdata; - mem = request_mem_region(r->start, davinci_spi->region_size, - pdev->name); + mem = request_mem_region(r->start, resource_size(r), pdev->name); if (mem == NULL) { ret = -EBUSY; goto free_master; } - davinci_spi->base = (struct davinci_spi_reg __iomem *) - ioremap(r->start, davinci_spi->region_size); - if (davinci_spi->base == NULL) { + dspi->base = ioremap(r->start, resource_size(r)); + if (dspi->base == NULL) { ret = -ENOMEM; goto release_region; } - davinci_spi->irq = platform_get_irq(pdev, 0); - if (davinci_spi->irq <= 0) { + dspi->irq = platform_get_irq(pdev, 0); + if (dspi->irq <= 0) { ret = -EINVAL; goto unmap_io; } - ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED, - dev_name(&pdev->dev), davinci_spi); + ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev), + dspi); if (ret) goto unmap_io; - /* Allocate tmp_buf for tx_buf */ - davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL); - if (davinci_spi->tmp_buf == NULL) { - ret = -ENOMEM; - goto irq_free; - } - - davinci_spi->bitbang.master = spi_master_get(master); - if (davinci_spi->bitbang.master == NULL) { + dspi->bitbang.master = spi_master_get(master); + if (dspi->bitbang.master == NULL) { ret = -ENODEV; - goto free_tmp_buf; + goto irq_free; } - davinci_spi->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(davinci_spi->clk)) { + dspi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(dspi->clk)) { ret = -ENODEV; goto put_master; } - clk_enable(davinci_spi->clk); - + clk_enable(dspi->clk); master->bus_num = pdev->id; master->num_chipselect = pdata->num_chipselect; master->setup = davinci_spi_setup; - master->cleanup = davinci_spi_cleanup; - - davinci_spi->bitbang.chipselect = davinci_spi_chipselect; - davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer; - - davinci_spi->version = pdata->version; - use_dma = pdata->use_dma; - - davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; - if (davinci_spi->version == SPI_VERSION_2) - davinci_spi->bitbang.flags |= SPI_READY; - - if (use_dma) { - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (r) - dma_rx_chan = r->start; - r = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (r) - dma_tx_chan = r->start; - r = platform_get_resource(pdev, IORESOURCE_DMA, 2); - if (r) - dma_eventq = r->start; - } - if (!use_dma || - dma_rx_chan == SPI_NO_RESOURCE || - dma_tx_chan == SPI_NO_RESOURCE || - dma_eventq == SPI_NO_RESOURCE) { - davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio; - use_dma = 0; - } else { - davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma; - davinci_spi->dma_channels = kzalloc(master->num_chipselect - * sizeof(struct davinci_spi_dma), GFP_KERNEL); - if (davinci_spi->dma_channels == NULL) { - ret = -ENOMEM; + dspi->bitbang.chipselect = davinci_spi_chipselect; + dspi->bitbang.setup_transfer = davinci_spi_setup_transfer; + + dspi->version = pdata->version; + + dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; + if (dspi->version == SPI_VERSION_2) + dspi->bitbang.flags |= SPI_READY; + + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) + dma_rx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) + dma_tx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 2); + if (r) + dma_eventq = r->start; + + dspi->bitbang.txrx_bufs = davinci_spi_bufs; + if (dma_rx_chan != SPI_NO_RESOURCE && + dma_tx_chan != SPI_NO_RESOURCE && + dma_eventq != SPI_NO_RESOURCE) { + dspi->dma.rx_channel = dma_rx_chan; + dspi->dma.tx_channel = dma_tx_chan; + dspi->dma.eventq = dma_eventq; + + ret = davinci_spi_request_dma(dspi); + if (ret) goto free_clk; - } - for (i = 0; i < master->num_chipselect; i++) { - davinci_spi->dma_channels[i].dma_rx_channel = -1; - davinci_spi->dma_channels[i].dma_rx_sync_dev = - dma_rx_chan; - davinci_spi->dma_channels[i].dma_tx_channel = -1; - davinci_spi->dma_channels[i].dma_tx_sync_dev = - dma_tx_chan; - davinci_spi->dma_channels[i].eventq = dma_eventq; - } - dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n" - "Using RX channel = %d , TX channel = %d and " - "event queue = %d", dma_rx_chan, dma_tx_chan, + dev_info(&pdev->dev, "DMA: supported\n"); + dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, " + "event queue: %d\n", dma_rx_chan, dma_tx_chan, dma_eventq); } - davinci_spi->get_rx = davinci_spi_rx_buf_u8; - davinci_spi->get_tx = davinci_spi_tx_buf_u8; + dspi->get_rx = davinci_spi_rx_buf_u8; + dspi->get_tx = davinci_spi_tx_buf_u8; - init_completion(&davinci_spi->done); + init_completion(&dspi->done); /* Reset In/OUT SPI module */ - iowrite32(0, davinci_spi->base + SPIGCR0); + iowrite32(0, dspi->base + SPIGCR0); udelay(100); - iowrite32(1, davinci_spi->base + SPIGCR0); + iowrite32(1, dspi->base + SPIGCR0); - /* Clock internal */ - if (davinci_spi->pdata->clk_internal) - set_io_bits(davinci_spi->base + SPIGCR1, - SPIGCR1_CLKMOD_MASK); - else - clear_io_bits(davinci_spi->base + SPIGCR1, - SPIGCR1_CLKMOD_MASK); + /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */ + spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK; + iowrite32(spipc0, dspi->base + SPIPC0); - /* master mode default */ - set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK); + /* initialize chip selects */ + if (pdata->chip_sel) { + for (i = 0; i < pdata->num_chipselect; i++) { + if (pdata->chip_sel[i] != SPI_INTERN_CS) + gpio_direction_output(pdata->chip_sel[i], 1); + } + } - if (davinci_spi->pdata->intr_level) - iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL); + if (pdata->intr_line) + iowrite32(SPI_INTLVL_1, dspi->base + SPILVL); else - iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL); + iowrite32(SPI_INTLVL_0, dspi->base + SPILVL); - ret = spi_bitbang_start(&davinci_spi->bitbang); - if (ret) - goto free_clk; + iowrite32(CS_DEFAULT, dspi->base + SPIDEF); - dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base); + /* master mode default */ + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK); + set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + + ret = spi_bitbang_start(&dspi->bitbang); + if (ret) + goto free_dma; - if (!pdata->poll_mode) - dev_info(&pdev->dev, "Operating in interrupt mode" - " using IRQ %d\n", davinci_spi->irq); + dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base); return ret; +free_dma: + edma_free_channel(dspi->dma.tx_channel); + edma_free_channel(dspi->dma.rx_channel); + edma_free_slot(dspi->dma.dummy_param_slot); free_clk: - clk_disable(davinci_spi->clk); - clk_put(davinci_spi->clk); + clk_disable(dspi->clk); + clk_put(dspi->clk); put_master: spi_master_put(master); -free_tmp_buf: - kfree(davinci_spi->tmp_buf); irq_free: - free_irq(davinci_spi->irq, davinci_spi); + free_irq(dspi->irq, dspi); unmap_io: - iounmap(davinci_spi->base); + iounmap(dspi->base); release_region: - release_mem_region(davinci_spi->pbase, davinci_spi->region_size); + release_mem_region(dspi->pbase, resource_size(r)); free_master: kfree(master); err: @@ -1222,27 +974,31 @@ err: */ static int __exit davinci_spi_remove(struct platform_device *pdev) { - struct davinci_spi *davinci_spi; + struct davinci_spi *dspi; struct spi_master *master; + struct resource *r; master = dev_get_drvdata(&pdev->dev); - davinci_spi = spi_master_get_devdata(master); + dspi = spi_master_get_devdata(master); - spi_bitbang_stop(&davinci_spi->bitbang); + spi_bitbang_stop(&dspi->bitbang); - clk_disable(davinci_spi->clk); - clk_put(davinci_spi->clk); + clk_disable(dspi->clk); + clk_put(dspi->clk); spi_master_put(master); - kfree(davinci_spi->tmp_buf); - free_irq(davinci_spi->irq, davinci_spi); - iounmap(davinci_spi->base); - release_mem_region(davinci_spi->pbase, davinci_spi->region_size); + free_irq(dspi->irq, dspi); + iounmap(dspi->base); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(dspi->pbase, resource_size(r)); return 0; } static struct platform_driver davinci_spi_driver = { - .driver.name = "spi_davinci", + .driver = { + .name = "spi_davinci", + .owner = THIS_MODULE, + }, .remove = __exit_p(davinci_spi_remove), }; diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 0838c79..22af77f 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -164,20 +164,23 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) static void wait_till_not_busy(struct dw_spi *dws) { - unsigned long end = jiffies + 1 + usecs_to_jiffies(1000); + unsigned long end = jiffies + 1 + usecs_to_jiffies(5000); while (time_before(jiffies, end)) { if (!(dw_readw(dws, sr) & SR_BUSY)) return; + cpu_relax(); } dev_err(&dws->master->dev, - "DW SPI: Status keeps busy for 1000us after a read/write!\n"); + "DW SPI: Status keeps busy for 5000us after a read/write!\n"); } static void flush(struct dw_spi *dws) { - while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) + while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) { dw_readw(dws, dr); + cpu_relax(); + } wait_till_not_busy(dws); } @@ -285,8 +288,10 @@ static void *next_transfer(struct dw_spi *dws) */ static int map_dma_buffers(struct dw_spi *dws) { - if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited - || !dws->cur_chip->enable_dma) + if (!dws->cur_msg->is_dma_mapped + || !dws->dma_inited + || !dws->cur_chip->enable_dma + || !dws->dma_ops) return 0; if (dws->cur_transfer->tx_dma) @@ -338,7 +343,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg) tasklet_schedule(&dws->pump_transfers); } -static void transfer_complete(struct dw_spi *dws) +void dw_spi_xfer_done(struct dw_spi *dws) { /* Update total byte transfered return count actual bytes read */ dws->cur_msg->actual_length += dws->len; @@ -353,6 +358,7 @@ static void transfer_complete(struct dw_spi *dws) } else tasklet_schedule(&dws->pump_transfers); } +EXPORT_SYMBOL_GPL(dw_spi_xfer_done); static irqreturn_t interrupt_transfer(struct dw_spi *dws) { @@ -384,7 +390,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) if (dws->tx_end > dws->tx) spi_umask_intr(dws, SPI_INT_TXEI); else - transfer_complete(dws); + dw_spi_xfer_done(dws); } return IRQ_HANDLED; @@ -419,11 +425,7 @@ static void poll_transfer(struct dw_spi *dws) */ dws->read(dws); - transfer_complete(dws); -} - -static void dma_transfer(struct dw_spi *dws, int cs_change) -{ + dw_spi_xfer_done(dws); } static void pump_transfers(unsigned long data) @@ -592,7 +594,7 @@ static void pump_transfers(unsigned long data) spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); spi_chip_sel(dws, spi->chip_select); - /* Set the interrupt mask, for poll mode just diable all int */ + /* Set the interrupt mask, for poll mode just disable all int */ spi_mask_intr(dws, 0xff); if (imask) spi_umask_intr(dws, imask); @@ -605,7 +607,7 @@ static void pump_transfers(unsigned long data) } if (dws->dma_mapped) - dma_transfer(dws, cs_change); + dws->dma_ops->dma_transfer(dws, cs_change); if (chip->poll_mode) poll_transfer(dws); @@ -901,11 +903,17 @@ int __devinit dw_spi_add_host(struct dw_spi *dws) master->setup = dw_spi_setup; master->transfer = dw_spi_transfer; - dws->dma_inited = 0; - /* Basic HW init */ spi_hw_init(dws); + if (dws->dma_ops && dws->dma_ops->dma_init) { + ret = dws->dma_ops->dma_init(dws); + if (ret) { + dev_warn(&master->dev, "DMA init failed\n"); + dws->dma_inited = 0; + } + } + /* Initial and start queue */ ret = init_queue(dws); if (ret) { @@ -930,6 +938,8 @@ int __devinit dw_spi_add_host(struct dw_spi *dws) err_queue_alloc: destroy_queue(dws); + if (dws->dma_ops && dws->dma_ops->dma_exit) + dws->dma_ops->dma_exit(dws); err_diable_hw: spi_enable_chip(dws, 0); free_irq(dws->irq, dws); @@ -938,7 +948,7 @@ err_free_master: exit: return ret; } -EXPORT_SYMBOL(dw_spi_add_host); +EXPORT_SYMBOL_GPL(dw_spi_add_host); void __devexit dw_spi_remove_host(struct dw_spi *dws) { @@ -954,6 +964,8 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws) dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not " "complete, message memory not freed\n"); + if (dws->dma_ops && dws->dma_ops->dma_exit) + dws->dma_ops->dma_exit(dws); spi_enable_chip(dws, 0); /* Disable clk */ spi_set_clk(dws, 0); @@ -962,7 +974,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws) /* Disconnect from the SPI framework */ spi_unregister_master(dws->master); } -EXPORT_SYMBOL(dw_spi_remove_host); +EXPORT_SYMBOL_GPL(dw_spi_remove_host); int dw_spi_suspend_host(struct dw_spi *dws) { @@ -975,7 +987,7 @@ int dw_spi_suspend_host(struct dw_spi *dws) spi_set_clk(dws, 0); return ret; } -EXPORT_SYMBOL(dw_spi_suspend_host); +EXPORT_SYMBOL_GPL(dw_spi_suspend_host); int dw_spi_resume_host(struct dw_spi *dws) { @@ -987,7 +999,7 @@ int dw_spi_resume_host(struct dw_spi *dws) dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret); return ret; } -EXPORT_SYMBOL(dw_spi_resume_host); +EXPORT_SYMBOL_GPL(dw_spi_resume_host); MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>"); MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/dw_spi_mid.c new file mode 100644 index 0000000..c91c966 --- /dev/null +++ b/drivers/spi/dw_spi_mid.c @@ -0,0 +1,223 @@ +/* + * dw_spi_mid.c - special handling for DW core on Intel MID platform + * + * Copyright (c) 2009, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, + * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spi/dw_spi.h> + +#ifdef CONFIG_SPI_DW_MID_DMA +#include <linux/intel_mid_dma.h> +#include <linux/pci.h> + +struct mid_dma { + struct intel_mid_dma_slave dmas_tx; + struct intel_mid_dma_slave dmas_rx; +}; + +static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param) +{ + struct dw_spi *dws = param; + + return dws->dmac && (&dws->dmac->dev == chan->device->dev); +} + +static int mid_spi_dma_init(struct dw_spi *dws) +{ + struct mid_dma *dw_dma = dws->dma_priv; + struct intel_mid_dma_slave *rxs, *txs; + dma_cap_mask_t mask; + + /* + * Get pci device for DMA controller, currently it could only + * be the DMA controller of either Moorestown or Medfield + */ + dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL); + if (!dws->dmac) + dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL); + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* 1. Init rx channel */ + dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + if (!dws->rxchan) + goto err_exit; + rxs = &dw_dma->dmas_rx; + rxs->hs_mode = LNW_DMA_HW_HS; + rxs->cfg_mode = LNW_DMA_PER_TO_MEM; + dws->rxchan->private = rxs; + + /* 2. Init tx channel */ + dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws); + if (!dws->txchan) + goto free_rxchan; + txs = &dw_dma->dmas_tx; + txs->hs_mode = LNW_DMA_HW_HS; + txs->cfg_mode = LNW_DMA_MEM_TO_PER; + dws->txchan->private = txs; + + dws->dma_inited = 1; + return 0; + +free_rxchan: + dma_release_channel(dws->rxchan); +err_exit: + return -1; + +} + +static void mid_spi_dma_exit(struct dw_spi *dws) +{ + dma_release_channel(dws->txchan); + dma_release_channel(dws->rxchan); +} + +/* + * dws->dma_chan_done is cleared before the dma transfer starts, + * callback for rx/tx channel will each increment it by 1. + * Reaching 2 means the whole spi transaction is done. + */ +static void dw_spi_dma_done(void *arg) +{ + struct dw_spi *dws = arg; + + if (++dws->dma_chan_done != 2) + return; + dw_spi_xfer_done(dws); +} + +static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change) +{ + struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL; + struct dma_chan *txchan, *rxchan; + struct dma_slave_config txconf, rxconf; + u16 dma_ctrl = 0; + + /* 1. setup DMA related registers */ + if (cs_change) { + spi_enable_chip(dws, 0); + dw_writew(dws, dmardlr, 0xf); + dw_writew(dws, dmatdlr, 0x10); + if (dws->tx_dma) + dma_ctrl |= 0x2; + if (dws->rx_dma) + dma_ctrl |= 0x1; + dw_writew(dws, dmacr, dma_ctrl); + spi_enable_chip(dws, 1); + } + + dws->dma_chan_done = 0; + txchan = dws->txchan; + rxchan = dws->rxchan; + + /* 2. Prepare the TX dma transfer */ + txconf.direction = DMA_TO_DEVICE; + txconf.dst_addr = dws->dma_addr; + txconf.dst_maxburst = LNW_DMA_MSIZE_16; + txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + + txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, + (unsigned long) &txconf); + + memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl)); + dws->tx_sgl.dma_address = dws->tx_dma; + dws->tx_sgl.length = dws->len; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + &dws->tx_sgl, + 1, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); + txdesc->callback = dw_spi_dma_done; + txdesc->callback_param = dws; + + /* 3. Prepare the RX dma transfer */ + rxconf.direction = DMA_FROM_DEVICE; + rxconf.src_addr = dws->dma_addr; + rxconf.src_maxburst = LNW_DMA_MSIZE_16; + rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + + rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, + (unsigned long) &rxconf); + + memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl)); + dws->rx_sgl.dma_address = dws->rx_dma; + dws->rx_sgl.length = dws->len; + + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + &dws->rx_sgl, + 1, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP); + rxdesc->callback = dw_spi_dma_done; + rxdesc->callback_param = dws; + + /* rx must be started before tx due to spi instinct */ + rxdesc->tx_submit(rxdesc); + txdesc->tx_submit(txdesc); + return 0; +} + +static struct dw_spi_dma_ops mid_dma_ops = { + .dma_init = mid_spi_dma_init, + .dma_exit = mid_spi_dma_exit, + .dma_transfer = mid_spi_dma_transfer, +}; +#endif + +/* Some specific info for SPI0 controller on Moorestown */ + +/* HW info for MRST CLk Control Unit, one 32b reg */ +#define MRST_SPI_CLK_BASE 100000000 /* 100m */ +#define MRST_CLK_SPI0_REG 0xff11d86c +#define CLK_SPI_BDIV_OFFSET 0 +#define CLK_SPI_BDIV_MASK 0x00000007 +#define CLK_SPI_CDIV_OFFSET 9 +#define CLK_SPI_CDIV_MASK 0x00000e00 +#define CLK_SPI_DISABLE_OFFSET 8 + +int dw_spi_mid_init(struct dw_spi *dws) +{ + u32 *clk_reg, clk_cdiv; + + clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16); + if (!clk_reg) + return -ENOMEM; + + /* get SPI controller operating freq info */ + clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET; + dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1); + iounmap(clk_reg); + + dws->num_cs = 16; + dws->fifo_len = 40; /* FIFO has 40 words buffer */ + +#ifdef CONFIG_SPI_DW_MID_DMA + dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL); + if (!dws->dma_priv) + return -ENOMEM; + dws->dma_ops = &mid_dma_ops; +#endif + return 0; +} diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c index 1f52755..49ec3aa 100644 --- a/drivers/spi/dw_spi_pci.c +++ b/drivers/spi/dw_spi_pci.c @@ -1,5 +1,5 @@ /* - * mrst_spi_pci.c - PCI interface driver for DW SPI Core + * dw_spi_pci.c - PCI interface driver for DW SPI Core * * Copyright (c) 2009, Intel Corporation. * @@ -26,8 +26,8 @@ #define DRIVER_NAME "dw_spi_pci" struct dw_spi_pci { - struct pci_dev *pdev; - struct dw_spi dws; + struct pci_dev *pdev; + struct dw_spi dws; }; static int __devinit spi_pci_probe(struct pci_dev *pdev, @@ -72,9 +72,17 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev, dws->parent_dev = &pdev->dev; dws->bus_num = 0; dws->num_cs = 4; - dws->max_freq = 25000000; /* for Moorestwon */ dws->irq = pdev->irq; - dws->fifo_len = 40; /* FIFO has 40 words buffer */ + + /* + * Specific handling for Intel MID paltforms, like dma setup, + * clock rate, FIFO depth. + */ + if (pdev->device == 0x0800) { + ret = dw_spi_mid_init(dws); + if (ret) + goto err_unmap; + } ret = dw_spi_add_host(dws); if (ret) @@ -140,7 +148,7 @@ static int spi_resume(struct pci_dev *pdev) #endif static const struct pci_device_id pci_ids[] __devinitdata = { - /* Intel Moorestown platform SPI controller 0 */ + /* Intel MID platform SPI controller 0 */ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, {}, }; diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 983fbbf..8a904c1 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -363,7 +363,7 @@ static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id) } /* bus_num is used only for the case dev->platform_data == NULL */ -static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, +static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, u32 size, unsigned int irq, s16 bus_num) { struct fsl_spi_platform_data *pdata = dev->platform_data; @@ -450,22 +450,7 @@ free_master: return ret; } -static int __exit mpc52xx_psc_spi_do_remove(struct device *dev) -{ - struct spi_master *master = dev_get_drvdata(dev); - struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master); - - flush_workqueue(mps->workqueue); - destroy_workqueue(mps->workqueue); - spi_unregister_master(master); - free_irq(mps->irq, mps); - if (mps->psc) - iounmap(mps->psc); - - return 0; -} - -static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op, +static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op, const struct of_device_id *match) { const u32 *regaddr_p; @@ -495,9 +480,19 @@ static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op, irq_of_parse_and_map(op->dev.of_node, 0), id); } -static int __exit mpc52xx_psc_spi_of_remove(struct platform_device *op) +static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op) { - return mpc52xx_psc_spi_do_remove(&op->dev); + struct spi_master *master = dev_get_drvdata(&op->dev); + struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master); + + flush_workqueue(mps->workqueue); + destroy_workqueue(mps->workqueue); + spi_unregister_master(master); + free_irq(mps->irq, mps); + if (mps->psc) + iounmap(mps->psc); + + return 0; } static const struct of_device_id mpc52xx_psc_spi_of_match[] = { @@ -510,7 +505,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match); static struct of_platform_driver mpc52xx_psc_spi_of_driver = { .probe = mpc52xx_psc_spi_of_probe, - .remove = __exit_p(mpc52xx_psc_spi_of_remove), + .remove = __devexit_p(mpc52xx_psc_spi_of_remove), .driver = { .name = "mpc52xx-psc-spi", .owner = THIS_MODULE, diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 951a160f..abb1ffb 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -397,7 +397,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); - dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); + dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE); /* for TX_ONLY mode, be sure all words have shifted out */ if (rx == NULL) { @@ -412,7 +412,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (rx != NULL) { wait_for_completion(&mcspi_dma->dma_rx_completion); - dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE); + dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); omap2_mcspi_set_enable(spi, 0); if (l & OMAP2_MCSPI_CHCONF_TURBO) { @@ -1025,11 +1025,6 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) if (m->is_dma_mapped || len < DMA_MIN_BYTES) continue; - /* Do DMA mapping "early" for better error reporting and - * dcache use. Note that if dma_unmap_single() ever starts - * to do real work on ARM, we'd need to clean up mappings - * for previous transfers on *ALL* exits of this loop... - */ if (tx_buf != NULL) { t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf, len, DMA_TO_DEVICE); @@ -1046,7 +1041,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) dev_dbg(&spi->dev, "dma %cX %d bytes error\n", 'R', len); if (tx_buf != NULL) - dma_unmap_single(NULL, t->tx_dma, + dma_unmap_single(&spi->dev, t->tx_dma, len, DMA_TO_DEVICE); return -EINVAL; } diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index e76b1af..9592883 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -23,11 +23,11 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/spi/pxa2xx_spi.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> #include <linux/workqueue.h> #include <linux/delay.h> -#include <linux/clk.h> #include <linux/gpio.h> #include <linux/slab.h> @@ -35,9 +35,6 @@ #include <asm/irq.h> #include <asm/delay.h> -#include <mach/dma.h> -#include <plat/ssp.h> -#include <mach/pxa2xx_spi.h> MODULE_AUTHOR("Stephen Street"); MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); @@ -46,8 +43,6 @@ MODULE_ALIAS("platform:pxa2xx-spi"); #define MAX_BUSES 3 -#define RX_THRESH_DFLT 8 -#define TX_THRESH_DFLT 8 #define TIMOUT_DFLT 1000 #define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR) @@ -168,7 +163,10 @@ struct chip_data { u8 enable_dma; u8 bits_per_word; u32 speed_hz; - int gpio_cs; + union { + int gpio_cs; + unsigned int frm; + }; int gpio_cs_inverted; int (*write)(struct driver_data *drv_data); int (*read)(struct driver_data *drv_data); @@ -181,6 +179,11 @@ static void cs_assert(struct driver_data *drv_data) { struct chip_data *chip = drv_data->cur_chip; + if (drv_data->ssp_type == CE4100_SSP) { + write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr); + return; + } + if (chip->cs_control) { chip->cs_control(PXA2XX_CS_ASSERT); return; @@ -194,6 +197,9 @@ static void cs_deassert(struct driver_data *drv_data) { struct chip_data *chip = drv_data->cur_chip; + if (drv_data->ssp_type == CE4100_SSP) + return; + if (chip->cs_control) { chip->cs_control(PXA2XX_CS_DEASSERT); return; @@ -203,6 +209,25 @@ static void cs_deassert(struct driver_data *drv_data) gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted); } +static void write_SSSR_CS(struct driver_data *drv_data, u32 val) +{ + void __iomem *reg = drv_data->ioaddr; + + if (drv_data->ssp_type == CE4100_SSP) + val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK; + + write_SSSR(val, reg); +} + +static int pxa25x_ssp_comp(struct driver_data *drv_data) +{ + if (drv_data->ssp_type == PXA25x_SSP) + return 1; + if (drv_data->ssp_type == CE4100_SSP) + return 1; + return 0; +} + static int flush(struct driver_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -214,7 +239,7 @@ static int flush(struct driver_data *drv_data) read_SSDR(reg); } } while ((read_SSSR(reg) & SSSR_BSY) && --limit); - write_SSSR(SSSR_ROR, reg); + write_SSSR_CS(drv_data, SSSR_ROR); return limit; } @@ -224,7 +249,7 @@ static int null_writer(struct driver_data *drv_data) void __iomem *reg = drv_data->ioaddr; u8 n_bytes = drv_data->n_bytes; - if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00) + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -252,7 +277,7 @@ static int u8_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00) + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -279,7 +304,7 @@ static int u16_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00) + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -306,7 +331,7 @@ static int u32_writer(struct driver_data *drv_data) { void __iomem *reg = drv_data->ioaddr; - if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00) + if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK) || (drv_data->tx == drv_data->tx_end)) return 0; @@ -507,9 +532,9 @@ static void dma_error_stop(struct driver_data *drv_data, const char *msg) /* Stop and reset */ DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; - write_SSSR(drv_data->clear_sr, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); flush(drv_data); write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); @@ -529,7 +554,7 @@ static void dma_transfer_complete(struct driver_data *drv_data) /* Clear and disable interrupts on SSP and DMA channels*/ write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg); - write_SSSR(drv_data->clear_sr, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL; DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL; @@ -622,7 +647,7 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data) /* Clear and disable timeout interrupt, do the rest in * dma_transfer_complete */ - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); /* finish this transfer, start the next */ @@ -635,14 +660,26 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data) return IRQ_NONE; } +static void reset_sccr1(struct driver_data *drv_data) +{ + void __iomem *reg = drv_data->ioaddr; + struct chip_data *chip = drv_data->cur_chip; + u32 sccr1_reg; + + sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1; + sccr1_reg &= ~SSCR1_RFT; + sccr1_reg |= chip->threshold; + write_SSCR1(sccr1_reg, reg); +} + static void int_error_stop(struct driver_data *drv_data, const char* msg) { void __iomem *reg = drv_data->ioaddr; /* Stop and reset SSP */ - write_SSSR(drv_data->clear_sr, reg); - write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); - if (drv_data->ssp_type != PXA25x_SSP) + write_SSSR_CS(drv_data, drv_data->clear_sr); + reset_sccr1(drv_data); + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); flush(drv_data); write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); @@ -658,9 +695,9 @@ static void int_transfer_complete(struct driver_data *drv_data) void __iomem *reg = drv_data->ioaddr; /* Stop SSP */ - write_SSSR(drv_data->clear_sr, reg); - write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); - if (drv_data->ssp_type != PXA25x_SSP) + write_SSSR_CS(drv_data, drv_data->clear_sr); + reset_sccr1(drv_data); + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); /* Update total byte transfered return count actual bytes read */ @@ -714,24 +751,34 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data) } if (drv_data->tx == drv_data->tx_end) { - write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg); - /* PXA25x_SSP has no timeout, read trailing bytes */ - if (drv_data->ssp_type == PXA25x_SSP) { - if (!wait_ssp_rx_stall(reg)) - { - int_error_stop(drv_data, "interrupt_transfer: " - "rx stall failed"); - return IRQ_HANDLED; - } - if (!drv_data->read(drv_data)) - { - int_error_stop(drv_data, - "interrupt_transfer: " - "trailing byte read failed"); - return IRQ_HANDLED; + u32 bytes_left; + u32 sccr1_reg; + + sccr1_reg = read_SSCR1(reg); + sccr1_reg &= ~SSCR1_TIE; + + /* + * PXA25x_SSP has no timeout, set up rx threshould for the + * remaing RX bytes. + */ + if (pxa25x_ssp_comp(drv_data)) { + + sccr1_reg &= ~SSCR1_RFT; + + bytes_left = drv_data->rx_end - drv_data->rx; + switch (drv_data->n_bytes) { + case 4: + bytes_left >>= 1; + case 2: + bytes_left >>= 1; } - int_transfer_complete(drv_data); + + if (bytes_left > RX_THRESH_DFLT) + bytes_left = RX_THRESH_DFLT; + + sccr1_reg |= SSCR1_RxTresh(bytes_left); } + write_SSCR1(sccr1_reg, reg); } /* We did something */ @@ -742,14 +789,26 @@ static irqreturn_t ssp_int(int irq, void *dev_id) { struct driver_data *drv_data = dev_id; void __iomem *reg = drv_data->ioaddr; + u32 sccr1_reg = read_SSCR1(reg); + u32 mask = drv_data->mask_sr; + u32 status; + + status = read_SSSR(reg); + + /* Ignore possible writes if we don't need to write */ + if (!(sccr1_reg & SSCR1_TIE)) + mask &= ~SSSR_TFS; + + if (!(status & mask)) + return IRQ_NONE; if (!drv_data->cur_msg) { write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg); write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg); - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, reg); - write_SSSR(drv_data->clear_sr, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); dev_err(&drv_data->pdev->dev, "bad message state " "in interrupt handler\n"); @@ -862,7 +921,7 @@ static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate) { unsigned long ssp_clk = clk_get_rate(ssp->clk); - if (ssp->type == PXA25x_SSP) + if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8; else return ((ssp_clk / rate - 1) & 0xfff) << 8; @@ -1088,7 +1147,7 @@ static void pump_transfers(unsigned long data) /* Clear status */ cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1; - write_SSSR(drv_data->clear_sr, reg); + write_SSSR_CS(drv_data, drv_data->clear_sr); } /* see if we need to reload the config registers */ @@ -1098,7 +1157,7 @@ static void pump_transfers(unsigned long data) /* stop the SSP, and update the other bits */ write_SSCR0(cr0 & ~SSCR0_SSE, reg); - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(chip->timeout, reg); /* first set CR1 without interrupt and service enables */ write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg); @@ -1106,7 +1165,7 @@ static void pump_transfers(unsigned long data) write_SSCR0(cr0, reg); } else { - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(chip->timeout, reg); } @@ -1233,14 +1292,13 @@ static int setup(struct spi_device *spi) uint tx_thres = TX_THRESH_DFLT; uint rx_thres = RX_THRESH_DFLT; - if (drv_data->ssp_type != PXA25x_SSP + if (!pxa25x_ssp_comp(drv_data) && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " "b/w not 4-32 for type non-PXA25x_SSP\n", drv_data->ssp_type, spi->bits_per_word); return -EINVAL; - } - else if (drv_data->ssp_type == PXA25x_SSP + } else if (pxa25x_ssp_comp(drv_data) && (spi->bits_per_word < 4 || spi->bits_per_word > 16)) { dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " @@ -1259,7 +1317,17 @@ static int setup(struct spi_device *spi) return -ENOMEM; } - chip->gpio_cs = -1; + if (drv_data->ssp_type == CE4100_SSP) { + if (spi->chip_select > 4) { + dev_err(&spi->dev, "failed setup: " + "cs number must not be > 4.\n"); + kfree(chip); + return -EINVAL; + } + + chip->frm = spi->chip_select; + } else + chip->gpio_cs = -1; chip->enable_dma = 0; chip->timeout = TIMOUT_DFLT; chip->dma_burst_size = drv_data->master_info->enable_dma ? @@ -1315,7 +1383,7 @@ static int setup(struct spi_device *spi) | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); /* NOTE: PXA25x_SSP _could_ use external clocking ... */ - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) dev_dbg(&spi->dev, "%ld Hz actual, %s\n", clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)), @@ -1350,23 +1418,27 @@ static int setup(struct spi_device *spi) spi_set_ctldata(spi, chip); + if (drv_data->ssp_type == CE4100_SSP) + return 0; + return setup_cs(spi, chip, chip_info); } static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); + struct driver_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; - if (gpio_is_valid(chip->gpio_cs)) + if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs)) gpio_free(chip->gpio_cs); kfree(chip); } -static int __init init_queue(struct driver_data *drv_data) +static int __devinit init_queue(struct driver_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); @@ -1454,7 +1526,7 @@ static int destroy_queue(struct driver_data *drv_data) return 0; } -static int __init pxa2xx_spi_probe(struct platform_device *pdev) +static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct pxa2xx_spi_master *platform_info; @@ -1484,6 +1556,10 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->pdev = pdev; drv_data->ssp = ssp; + master->dev.parent = &pdev->dev; +#ifdef CONFIG_OF + master->dev.of_node = pdev->dev.of_node; +#endif /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; @@ -1500,7 +1576,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->ioaddr = ssp->mmio_base; drv_data->ssdr_physical = ssp->phys_base + SSDR; - if (ssp->type == PXA25x_SSP) { + if (pxa25x_ssp_comp(drv_data)) { drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; drv_data->dma_cr1 = 0; drv_data->clear_sr = SSSR_ROR; @@ -1512,7 +1588,8 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR; } - status = request_irq(ssp->irq, ssp_int, 0, dev_name(dev), drv_data); + status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev), + drv_data); if (status < 0) { dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq); goto out_error_master_alloc; @@ -1561,7 +1638,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev) | SSCR0_Motorola | SSCR0_DataSize(8), drv_data->ioaddr); - if (drv_data->ssp_type != PXA25x_SSP) + if (!pxa25x_ssp_comp(drv_data)) write_SSTO(0, drv_data->ioaddr); write_SSPSP(0, drv_data->ioaddr); @@ -1723,13 +1800,14 @@ static struct platform_driver driver = { .pm = &pxa2xx_spi_pm_ops, #endif }, + .probe = pxa2xx_spi_probe, .remove = pxa2xx_spi_remove, .shutdown = pxa2xx_spi_shutdown, }; static int __init pxa2xx_spi_init(void) { - return platform_driver_probe(&driver, pxa2xx_spi_probe); + return platform_driver_register(&driver); } subsys_initcall(pxa2xx_spi_init); diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c new file mode 100644 index 0000000..351d8a3 --- /dev/null +++ b/drivers/spi/pxa2xx_spi_pci.c @@ -0,0 +1,201 @@ +/* + * CE4100's SPI device is more or less the same one as found on PXA + * + */ +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/spi/pxa2xx_spi.h> + +struct awesome_struct { + struct ssp_device ssp; + struct platform_device spi_pdev; + struct pxa2xx_spi_master spi_pdata; +}; + +static DEFINE_MUTEX(ssp_lock); +static LIST_HEAD(ssp_list); + +struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + struct ssp_device *ssp = NULL; + + mutex_lock(&ssp_lock); + + list_for_each_entry(ssp, &ssp_list, node) { + if (ssp->port_id == port && ssp->use_count == 0) { + ssp->use_count++; + ssp->label = label; + break; + } + } + + mutex_unlock(&ssp_lock); + + if (&ssp->node == &ssp_list) + return NULL; + + return ssp; +} +EXPORT_SYMBOL_GPL(pxa_ssp_request); + +void pxa_ssp_free(struct ssp_device *ssp) +{ + mutex_lock(&ssp_lock); + if (ssp->use_count) { + ssp->use_count--; + ssp->label = NULL; + } else + dev_err(&ssp->pdev->dev, "device already free\n"); + mutex_unlock(&ssp_lock); +} +EXPORT_SYMBOL_GPL(pxa_ssp_free); + +static void plat_dev_release(struct device *dev) +{ + struct awesome_struct *as = container_of(dev, + struct awesome_struct, spi_pdev.dev); + + of_device_node_put(&as->spi_pdev.dev); +} + +static int __devinit ce4100_spi_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int ret; + resource_size_t phys_beg; + resource_size_t phys_len; + struct awesome_struct *spi_info; + struct platform_device *pdev; + struct pxa2xx_spi_master *spi_pdata; + struct ssp_device *ssp; + + ret = pci_enable_device(dev); + if (ret) + return ret; + + phys_beg = pci_resource_start(dev, 0); + phys_len = pci_resource_len(dev, 0); + + if (!request_mem_region(phys_beg, phys_len, + "CE4100 SPI")) { + dev_err(&dev->dev, "Can't request register space.\n"); + ret = -EBUSY; + return ret; + } + + spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL); + if (!spi_info) { + ret = -ENOMEM; + goto err_kz; + } + ssp = &spi_info->ssp; + pdev = &spi_info->spi_pdev; + spi_pdata = &spi_info->spi_pdata; + + pdev->name = "pxa2xx-spi"; + pdev->id = dev->devfn; + pdev->dev.parent = &dev->dev; + pdev->dev.platform_data = &spi_info->spi_pdata; + +#ifdef CONFIG_OF + pdev->dev.of_node = dev->dev.of_node; +#endif + pdev->dev.release = plat_dev_release; + + spi_pdata->num_chipselect = dev->devfn; + + ssp->phys_base = pci_resource_start(dev, 0); + ssp->mmio_base = ioremap(phys_beg, phys_len); + if (!ssp->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -EIO; + goto err_remap; + } + ssp->irq = dev->irq; + ssp->port_id = pdev->id; + ssp->type = PXA25x_SSP; + + mutex_lock(&ssp_lock); + list_add(&ssp->node, &ssp_list); + mutex_unlock(&ssp_lock); + + pci_set_drvdata(dev, spi_info); + + ret = platform_device_register(pdev); + if (ret) + goto err_dev_add; + + return ret; + +err_dev_add: + pci_set_drvdata(dev, NULL); + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + iounmap(ssp->mmio_base); + +err_remap: + kfree(spi_info); + +err_kz: + release_mem_region(phys_beg, phys_len); + + return ret; +} + +static void __devexit ce4100_spi_remove(struct pci_dev *dev) +{ + struct awesome_struct *spi_info; + struct platform_device *pdev; + struct ssp_device *ssp; + + spi_info = pci_get_drvdata(dev); + + ssp = &spi_info->ssp; + pdev = &spi_info->spi_pdev; + + platform_device_unregister(pdev); + + iounmap(ssp->mmio_base); + release_mem_region(pci_resource_start(dev, 0), + pci_resource_len(dev, 0)); + + mutex_lock(&ssp_lock); + list_del(&ssp->node); + mutex_unlock(&ssp_lock); + + pci_set_drvdata(dev, NULL); + pci_disable_device(dev); + kfree(spi_info); +} + +static struct pci_device_id ce4100_spi_devices[] __devinitdata = { + + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, ce4100_spi_devices); + +static struct pci_driver ce4100_spi_driver = { + .name = "ce4100_spi", + .id_table = ce4100_spi_devices, + .probe = ce4100_spi_probe, + .remove = __devexit_p(ce4100_spi_remove), +}; + +static int __init ce4100_spi_init(void) +{ + return pci_register_driver(&ce4100_spi_driver); +} +module_init(ce4100_spi_init); + +static void __exit ce4100_spi_exit(void) +{ + pci_unregister_driver(&ce4100_spi_driver); +} +module_exit(ce4100_spi_exit); + +MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 55a38e2..9469564 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -66,7 +66,6 @@ enum spi_imx_devtype { SPI_IMX_VER_0_5, SPI_IMX_VER_0_7, SPI_IMX_VER_2_3, - SPI_IMX_VER_AUTODETECT, }; struct spi_imx_data; @@ -720,9 +719,6 @@ static void spi_imx_cleanup(struct spi_device *spi) static struct platform_device_id spi_imx_devtype[] = { { - .name = DRIVER_NAME, - .driver_data = SPI_IMX_VER_AUTODETECT, - }, { .name = "imx1-cspi", .driver_data = SPI_IMX_VER_IMX1, }, { @@ -802,30 +798,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) init_completion(&spi_imx->xfer_done); - if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) { - if (cpu_is_mx25() || cpu_is_mx35()) - spi_imx->devtype_data = - spi_imx_devtype_data[SPI_IMX_VER_0_7]; - else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) - spi_imx->devtype_data = - spi_imx_devtype_data[SPI_IMX_VER_0_4]; - else if (cpu_is_mx27() || cpu_is_mx21()) - spi_imx->devtype_data = - spi_imx_devtype_data[SPI_IMX_VER_0_0]; - else if (cpu_is_mx1()) - spi_imx->devtype_data = - spi_imx_devtype_data[SPI_IMX_VER_IMX1]; - else - BUG(); - } else - spi_imx->devtype_data = - spi_imx_devtype_data[pdev->id_entry->driver_data]; - - if (!spi_imx->devtype_data.intctrl) { - dev_err(&pdev->dev, "no support for this device compiled in\n"); - ret = -ENODEV; - goto out_gpio_free; - } + spi_imx->devtype_data = + spi_imx_devtype_data[pdev->id_entry->driver_data]; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -847,7 +821,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) } spi_imx->irq = platform_get_irq(pdev, 0); - if (spi_imx->irq <= 0) { + if (spi_imx->irq < 0) { ret = -EINVAL; goto out_iounmap; } diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c index dff63be..d5be18b 100644 --- a/drivers/spi/spi_nuc900.c +++ b/drivers/spi/spi_nuc900.c @@ -449,7 +449,7 @@ err_iomap: release_mem_region(hw->res->start, resource_size(hw->res)); kfree(hw->ioarea); err_pdata: - spi_master_put(hw->master);; + spi_master_put(hw->master); err_nomem: return err; diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c index 58e187f..79e48d4 100644 --- a/drivers/spi/spi_topcliff_pch.c +++ b/drivers/spi/spi_topcliff_pch.c @@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, if (reg_spsr_val & SPSR_FI_BIT) { /* disable FI & RFI interrupts */ pch_spi_setclr_reg(data->master, PCH_SPCR, 0, - SPCR_FIE_BIT | SPCR_TFIE_BIT); + SPCR_FIE_BIT | SPCR_RFIE_BIT); /* transfer is completed;inform pch_spi_process_messages */ data->transfer_complete = true; @@ -677,15 +677,15 @@ static void pch_spi_set_ir(struct pch_spi_data *data) { /* enable interrupts */ if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { - /* set receive threhold to PCH_RX_THOLD */ + /* set receive threshold to PCH_RX_THOLD */ pch_spi_setclr_reg(data->master, PCH_SPCR, - PCH_RX_THOLD << SPCR_TFIC_FIELD, - ~MASK_TFIC_SPCR_BITS); + PCH_RX_THOLD << SPCR_RFIC_FIELD, + ~MASK_RFIC_SPCR_BITS); /* enable FI and RFI interrupts */ pch_spi_setclr_reg(data->master, PCH_SPCR, - SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0); + SPCR_RFIE_BIT | SPCR_FIE_BIT, 0); } else { - /* set receive threhold to maximum */ + /* set receive threshold to maximum */ pch_spi_setclr_reg(data->master, PCH_SPCR, PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, ~MASK_TFIC_SPCR_BITS); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 80f2db5..7adaef6 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -1,26 +1,27 @@ /* - * xilinx_spi.c - * * Xilinx SPI controller driver (master mode only) * * Author: MontaVista Software, Inc. * source@mvista.com * - * 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. + * Copyright (c) 2010 Secret Lab Technologies, Ltd. + * Copyright (c) 2009 Intel Corporation + * 2002-2007 (c) MontaVista Software, Inc. + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. */ #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> - +#include <linux/of.h> +#include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> -#include <linux/io.h> - -#include "xilinx_spi.h" #include <linux/spi/xilinx_spi.h> +#include <linux/io.h> #define XILINX_SPI_NAME "xilinx_spi" @@ -350,19 +351,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static const struct of_device_id xilinx_spi_of_match[] = { + { .compatible = "xlnx,xps-spi-2.00.a", }, + { .compatible = "xlnx,xps-spi-2.00.b", }, + {} +}; +MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); +#endif + struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, - u32 irq, s16 bus_num) + u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) { struct spi_master *master; struct xilinx_spi *xspi; - struct xspi_platform_data *pdata = dev->platform_data; int ret; - if (!pdata) { - dev_err(dev, "No platform data attached\n"); - return NULL; - } - master = spi_alloc_master(dev, sizeof(struct xilinx_spi)); if (!master) return NULL; @@ -389,21 +393,21 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, } master->bus_num = bus_num; - master->num_chipselect = pdata->num_chipselect; + master->num_chipselect = num_cs; #ifdef CONFIG_OF master->dev.of_node = dev->of_node; #endif xspi->mem = *mem; xspi->irq = irq; - if (pdata->little_endian) { + if (little_endian) { xspi->read_fn = xspi_read32; xspi->write_fn = xspi_write32; } else { xspi->read_fn = xspi_read32_be; xspi->write_fn = xspi_write32_be; } - xspi->bits_per_word = pdata->bits_per_word; + xspi->bits_per_word = bits_per_word; if (xspi->bits_per_word == 8) { xspi->tx_fn = xspi_tx8; xspi->rx_fn = xspi_rx8; @@ -462,6 +466,97 @@ void xilinx_spi_deinit(struct spi_master *master) } EXPORT_SYMBOL(xilinx_spi_deinit); +static int __devinit xilinx_spi_probe(struct platform_device *dev) +{ + struct xspi_platform_data *pdata; + struct resource *r; + int irq, num_cs = 0, little_endian = 0, bits_per_word = 8; + struct spi_master *master; + u8 i; + + pdata = dev->dev.platform_data; + if (pdata) { + num_cs = pdata->num_chipselect; + little_endian = pdata->little_endian; + bits_per_word = pdata->bits_per_word; + } + +#ifdef CONFIG_OF + if (dev->dev.of_node) { + const __be32 *prop; + int len; + + /* number of slave select bits is required */ + prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits", + &len); + if (prop && len >= sizeof(*prop)) + num_cs = __be32_to_cpup(prop); + } +#endif + + if (!num_cs) { + dev_err(&dev->dev, "Missing slave select configuration data\n"); + return -EINVAL; + } + + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) + return -ENODEV; + + irq = platform_get_irq(dev, 0); + if (irq < 0) + return -ENXIO; + + master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs, + little_endian, bits_per_word); + if (!master) + return -ENODEV; + + if (pdata) { + for (i = 0; i < pdata->num_devices; i++) + spi_new_device(master, pdata->devices + i); + } + + platform_set_drvdata(dev, master); + return 0; +} + +static int __devexit xilinx_spi_remove(struct platform_device *dev) +{ + xilinx_spi_deinit(platform_get_drvdata(dev)); + platform_set_drvdata(dev, 0); + + return 0; +} + +/* work with hotplug and coldplug */ +MODULE_ALIAS("platform:" XILINX_SPI_NAME); + +static struct platform_driver xilinx_spi_driver = { + .probe = xilinx_spi_probe, + .remove = __devexit_p(xilinx_spi_remove), + .driver = { + .name = XILINX_SPI_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_OF + .of_match_table = xilinx_spi_of_match, +#endif + }, +}; + +static int __init xilinx_spi_pltfm_init(void) +{ + return platform_driver_register(&xilinx_spi_driver); +} +module_init(xilinx_spi_pltfm_init); + +static void __exit xilinx_spi_pltfm_exit(void) +{ + platform_driver_unregister(&xilinx_spi_driver); +} +module_exit(xilinx_spi_pltfm_exit); + MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>"); MODULE_DESCRIPTION("Xilinx SPI driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/spi/xilinx_spi.h b/drivers/spi/xilinx_spi.h deleted file mode 100644 index d211acc..0000000 --- a/drivers/spi/xilinx_spi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Xilinx SPI device driver API and platform data header file - * - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _XILINX_SPI_H_ -#define _XILINX_SPI_H_ - -#include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> - -#define XILINX_SPI_NAME "xilinx_spi" - -struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, - u32 irq, s16 bus_num); - -void xilinx_spi_deinit(struct spi_master *master); -#endif diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c deleted file mode 100644 index b66c2db..0000000 --- a/drivers/spi/xilinx_spi_of.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Xilinx SPI OF device driver - * - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Xilinx SPI devices as OF devices - * - * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/of_device.h> -#include <linux/of_spi.h> - -#include <linux/spi/xilinx_spi.h> -#include "xilinx_spi.h" - - -static int __devinit xilinx_spi_of_probe(struct platform_device *ofdev, - const struct of_device_id *match) -{ - struct spi_master *master; - struct xspi_platform_data *pdata; - struct resource r_mem; - struct resource r_irq; - int rc = 0; - const u32 *prop; - int len; - - rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem); - if (rc) { - dev_warn(&ofdev->dev, "invalid address\n"); - return rc; - } - - rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq); - if (rc == NO_IRQ) { - dev_warn(&ofdev->dev, "no IRQ found\n"); - return -ENODEV; - } - - ofdev->dev.platform_data = - kzalloc(sizeof(struct xspi_platform_data), GFP_KERNEL); - pdata = ofdev->dev.platform_data; - if (!pdata) - return -ENOMEM; - - /* number of slave select bits is required */ - prop = of_get_property(ofdev->dev.of_node, "xlnx,num-ss-bits", &len); - if (!prop || len < sizeof(*prop)) { - dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n"); - return -EINVAL; - } - pdata->num_chipselect = *prop; - pdata->bits_per_word = 8; - master = xilinx_spi_init(&ofdev->dev, &r_mem, r_irq.start, -1); - if (!master) - return -ENODEV; - - dev_set_drvdata(&ofdev->dev, master); - - return 0; -} - -static int __devexit xilinx_spi_remove(struct platform_device *ofdev) -{ - xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev)); - dev_set_drvdata(&ofdev->dev, 0); - kfree(ofdev->dev.platform_data); - ofdev->dev.platform_data = NULL; - return 0; -} - -static int __exit xilinx_spi_of_remove(struct platform_device *op) -{ - return xilinx_spi_remove(op); -} - -static const struct of_device_id xilinx_spi_of_match[] = { - { .compatible = "xlnx,xps-spi-2.00.a", }, - { .compatible = "xlnx,xps-spi-2.00.b", }, - {} -}; - -MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); - -static struct of_platform_driver xilinx_spi_of_driver = { - .probe = xilinx_spi_of_probe, - .remove = __exit_p(xilinx_spi_of_remove), - .driver = { - .name = "xilinx-xps-spi", - .owner = THIS_MODULE, - .of_match_table = xilinx_spi_of_match, - }, -}; - -static int __init xilinx_spi_of_init(void) -{ - return of_register_platform_driver(&xilinx_spi_of_driver); -} -module_init(xilinx_spi_of_init); - -static void __exit xilinx_spi_of_exit(void) -{ - of_unregister_platform_driver(&xilinx_spi_of_driver); -} -module_exit(xilinx_spi_of_exit); - -MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); -MODULE_DESCRIPTION("Xilinx SPI platform driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/xilinx_spi_pltfm.c b/drivers/spi/xilinx_spi_pltfm.c deleted file mode 100644 index 24debac..0000000 --- a/drivers/spi/xilinx_spi_pltfm.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Support for Xilinx SPI platform devices - * Copyright (c) 2009 Intel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Xilinx SPI devices as platform devices - * - * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> -#include <linux/spi/xilinx_spi.h> - -#include "xilinx_spi.h" - -static int __devinit xilinx_spi_probe(struct platform_device *dev) -{ - struct xspi_platform_data *pdata; - struct resource *r; - int irq; - struct spi_master *master; - u8 i; - - pdata = dev->dev.platform_data; - if (!pdata) - return -ENODEV; - - r = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!r) - return -ENODEV; - - irq = platform_get_irq(dev, 0); - if (irq < 0) - return -ENXIO; - - master = xilinx_spi_init(&dev->dev, r, irq, dev->id); - if (!master) - return -ENODEV; - - for (i = 0; i < pdata->num_devices; i++) - spi_new_device(master, pdata->devices + i); - - platform_set_drvdata(dev, master); - return 0; -} - -static int __devexit xilinx_spi_remove(struct platform_device *dev) -{ - xilinx_spi_deinit(platform_get_drvdata(dev)); - platform_set_drvdata(dev, 0); - - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:" XILINX_SPI_NAME); - -static struct platform_driver xilinx_spi_driver = { - .probe = xilinx_spi_probe, - .remove = __devexit_p(xilinx_spi_remove), - .driver = { - .name = XILINX_SPI_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init xilinx_spi_pltfm_init(void) -{ - return platform_driver_register(&xilinx_spi_driver); -} -module_init(xilinx_spi_pltfm_init); - -static void __exit xilinx_spi_pltfm_exit(void) -{ - platform_driver_unregister(&xilinx_spi_driver); -} -module_exit(xilinx_spi_pltfm_exit); - -MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>"); -MODULE_DESCRIPTION("Xilinx SPI platform driver"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/include/linux/pxa2xx_ssp.h index fe43150..2f691e4 100644 --- a/arch/arm/plat-pxa/include/plat/ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -1,5 +1,5 @@ /* - * ssp.h + * pxa2xx_ssp.h * * Copyright (C) 2003 Russell King, All Rights Reserved. * @@ -16,8 +16,8 @@ * PXA3xx SSP1, SSP2, SSP3, SSP4 */ -#ifndef __ASM_ARCH_SSP_H -#define __ASM_ARCH_SSP_H +#ifndef __LINUX_SSP_H +#define __LINUX_SSP_H #include <linux/list.h> #include <linux/io.h> @@ -71,11 +71,8 @@ #define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */ #define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */ #define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */ -#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ -#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ -#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ -#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ +#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */ #define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */ #define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */ #define SSSR_BSY (1 << 4) /* SSP Busy */ @@ -83,6 +80,31 @@ #define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */ #define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */ +#ifdef CONFIG_ARCH_PXA +#define RX_THRESH_DFLT 8 +#define TX_THRESH_DFLT 8 + +#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */ + +#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */ +#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */ + +#else + +#define RX_THRESH_DFLT 2 +#define TX_THRESH_DFLT 2 + +#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */ +#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */ + +#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */ +#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */ +#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */ +#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */ +#endif /* extra bits in PXA255, PXA26x and PXA27x SSP ports */ #define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */ @@ -139,6 +161,7 @@ enum pxa_ssp_type { PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */ PXA27x_SSP, PXA168_SSP, + CE4100_SSP, }; struct ssp_device { @@ -183,4 +206,4 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) struct ssp_device *pxa_ssp_request(int port, const char *label); void pxa_ssp_free(struct ssp_device *); -#endif /* __ASM_ARCH_SSP_H */ +#endif diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h index c91302f..6cd10f6 100644 --- a/include/linux/spi/dw_spi.h +++ b/include/linux/spi/dw_spi.h @@ -1,5 +1,6 @@ #ifndef DW_SPI_HEADER_H #define DW_SPI_HEADER_H + #include <linux/io.h> /* Bit fields in CTRLR0 */ @@ -82,6 +83,13 @@ struct dw_spi_reg { though only low 16 bits matters */ } __packed; +struct dw_spi; +struct dw_spi_dma_ops { + int (*dma_init)(struct dw_spi *dws); + void (*dma_exit)(struct dw_spi *dws); + int (*dma_transfer)(struct dw_spi *dws, int cs_change); +}; + struct dw_spi { struct spi_master *master; struct spi_device *cur_dev; @@ -136,13 +144,15 @@ struct dw_spi { /* Dma info */ int dma_inited; struct dma_chan *txchan; + struct scatterlist tx_sgl; struct dma_chan *rxchan; - int txdma_done; - int rxdma_done; - u64 tx_param; - u64 rx_param; + struct scatterlist rx_sgl; + int dma_chan_done; struct device *dma_dev; - dma_addr_t dma_addr; + dma_addr_t dma_addr; /* phy address of the Data register */ + struct dw_spi_dma_ops *dma_ops; + void *dma_priv; /* platform relate info */ + struct pci_dev *dmac; /* Bus interface info */ void *priv; @@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); +extern void dw_spi_xfer_done(struct dw_spi *dws); + +/* platform related setup */ +extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */ #endif /* DW_SPI_HEADER_H */ diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h new file mode 100644 index 0000000..d3e1075 --- /dev/null +++ b/include/linux/spi/pxa2xx_spi.h @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __linux_pxa2xx_spi_h +#define __linux_pxa2xx_spi_h + +#include <linux/pxa2xx_ssp.h> + +#define PXA2XX_CS_ASSERT (0x01) +#define PXA2XX_CS_DEASSERT (0x02) + +/* device.platform_data for SSP controller devices */ +struct pxa2xx_spi_master { + u32 clock_enable; + u16 num_chipselect; + u8 enable_dma; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct pxa2xx_spi_chip { + u8 tx_threshold; + u8 rx_threshold; + u8 dma_burst_size; + u32 timeout; + u8 enable_loopback; + int gpio_cs; + void (*cs_control)(u32 command); +}; + +#ifdef CONFIG_ARCH_PXA + +#include <linux/clk.h> +#include <mach/dma.h> + +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + +#else +/* + * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or + * plat/ include path. + * The CE4100 does not provide DMA support. This bits are here to let the driver + * compile and will never be used. Maybe we get DMA support at a later point in + * time. + */ + +#define DCSR(n) (n) +#define DSADR(n) (n) +#define DTADR(n) (n) +#define DCMD(n) (n) +#define DRCMR(n) (n) + +#define DCSR_RUN (1 << 31) /* Run Bit */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */ + +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */ + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */ +#define DDADR_STOP (1 << 0) /* Stop */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* + * Descriptor structure for PXA's DMA engine + * Note: this structure must always be aligned to a 16-byte boundary. + */ + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +} pxa_dma_prio; + +/* + * DMA registration + */ + +static inline int pxa_request_dma(char *name, + pxa_dma_prio prio, + void (*irq_handler)(int, void *), + void *data) +{ + return -ENODEV; +} + +static inline void pxa_free_dma(int dma_ch) +{ +} + +/* + * The CE4100 does not have the clk framework implemented and SPI clock can + * not be switched on/off or the divider changed. + */ +static inline void clk_disable(struct clk *clk) +{ +} + +static inline int clk_enable(struct clk *clk) +{ + return 0; +} + +static inline unsigned long clk_get_rate(struct clk *clk) +{ + return 3686400; +} + +#endif +#endif diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index b439eee..8ad93ee 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/pxa2xx_ssp.h> #include <asm/irq.h> @@ -33,7 +34,6 @@ #include <mach/hardware.h> #include <mach/dma.h> #include <mach/audio.h> -#include <plat/ssp.h> #include "../../arm/pxa2xx-pcm.h" #include "pxa-ssp.h" |