diff options
-rw-r--r-- | Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 29 | ||||
-rw-r--r-- | include/sound/mpu401.h | 14 | ||||
-rw-r--r-- | sound/drivers/mpu401/mpu401_uart.c | 96 | ||||
-rw-r--r-- | sound/isa/sscape.c | 3 | ||||
-rw-r--r-- | sound/pci/als4000.c | 4 | ||||
-rw-r--r-- | sound/pci/au88x0/au88x0_mpu401.c | 3 | ||||
-rw-r--r-- | sound/pci/azt3328.c | 4 | ||||
-rw-r--r-- | sound/pci/cmipci.c | 4 | ||||
-rw-r--r-- | sound/pci/cs5535audio/cs5535audio.c | 21 | ||||
-rw-r--r-- | sound/pci/es1938.c | 3 | ||||
-rw-r--r-- | sound/pci/es1968.c | 3 | ||||
-rw-r--r-- | sound/pci/fm801.c | 3 | ||||
-rw-r--r-- | sound/pci/ice1712/ice1712.c | 6 | ||||
-rw-r--r-- | sound/pci/ice1712/ice1724.c | 3 | ||||
-rw-r--r-- | sound/pci/maestro3.c | 3 | ||||
-rw-r--r-- | sound/pci/sonicvibes.c | 2 | ||||
-rw-r--r-- | sound/pci/trident/trident.c | 3 | ||||
-rw-r--r-- | sound/pci/via82xx.c | 2 | ||||
-rw-r--r-- | sound/pci/ymfpci/ymfpci.c | 3 |
19 files changed, 147 insertions, 62 deletions
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index 23c6c7c..635cbb9 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -4215,7 +4215,7 @@ struct _snd_pcm_runtime { <programlisting> <![CDATA[ struct snd_rawmidi *rmidi; - snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, integrated, + snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags, irq, irq_flags, &rmidi); ]]> </programlisting> @@ -4242,15 +4242,36 @@ struct _snd_pcm_runtime { </para> <para> + The 5th argument is bitflags for additional information. When the i/o port address above is a part of the PCI i/o region, the MPU401 i/o port might have been already allocated - (reserved) by the driver itself. In such a case, pass non-zero - to the 5th argument - (<parameter>integrated</parameter>). Otherwise, pass 0 to it, + (reserved) by the driver itself. In such a case, pass a bit flag + <constant>MPU401_INFO_INTEGRATED</constant>, and the mpu401-uart layer will allocate the i/o ports by itself. </para> + <para> + When the controller supports only the input or output MIDI stream, + pass <constant>MPU401_INFO_INPUT</constant> or + <constant>MPU401_INFO_OUTPUT</constant> bitflag, respectively. + Then the rawmidi instance is created as a single stream. + </para> + + <para> + <constant>MPU401_INFO_MMIO</constant> bitflag is used to change + the access method to MMIO (via readb and writeb) instead of + iob and outb. In this case, you have to pass the iomapped address + to <function>snd_mpu401_uart_new()</function>. + </para> + + <para> + When <constant>MPU401_INFO_TX_IRQ</constant> is set, the output + stream isn't checked in the default interrupt handler. The driver + needs to call <function>snd_mpu401_uart_interrupt_tx()</function> + by itself to start processing the output stream in irq handler. + </para> + <para> Usually, the port address corresponds to the command port and port + 1 corresponds to the data port. If not, you may change diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h index 8e97ace..ac50432 100644 --- a/include/sound/mpu401.h +++ b/include/sound/mpu401.h @@ -45,6 +45,12 @@ #define MPU401_HW_PC98II 18 /* Roland PC98II */ #define MPU401_HW_AUREAL 19 /* Aureal Vortex */ +#define MPU401_INFO_INPUT (1 << 0) /* input stream */ +#define MPU401_INFO_OUTPUT (1 << 1) /* output stream */ +#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */ +#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */ +#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */ + #define MPU401_MODE_BIT_INPUT 0 #define MPU401_MODE_BIT_OUTPUT 1 #define MPU401_MODE_BIT_INPUT_TRIGGER 2 @@ -62,6 +68,7 @@ struct snd_mpu401 { struct snd_rawmidi *rmidi; unsigned short hardware; /* MPU401_HW_XXXX */ + unsigned int info_flags; /* MPU401_INFO_XXX */ unsigned long port; /* base port of MPU-401 chip */ unsigned long cport; /* port + 1 (usually) */ struct resource *res; /* port resource */ @@ -99,13 +106,16 @@ struct snd_mpu401 { */ -irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, struct pt_regs *regs); +irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, + struct pt_regs *regs); +irqreturn_t snd_mpu401_uart_interrupt_tx(int irq, void *dev_id, + struct pt_regs *regs); int snd_mpu401_uart_new(struct snd_card *card, int device, unsigned short hardware, unsigned long port, - int integrated, + unsigned int info_flags, int irq, int irq_flags, struct snd_rawmidi ** rrawmidi); diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c index cd64d3e..4bf07ca 100644 --- a/sound/drivers/mpu401/mpu401_uart.c +++ b/sound/drivers/mpu401/mpu401_uart.c @@ -95,17 +95,8 @@ static void snd_mpu401_uart_clear_rx(struct snd_mpu401 *mpu) #endif } -static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu) +static void uart_interrupt_tx(struct snd_mpu401 *mpu) { - spin_lock(&mpu->input_lock); - if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) - snd_mpu401_uart_input_read(mpu); - else - snd_mpu401_uart_clear_rx(mpu); - spin_unlock(&mpu->input_lock); - /* ok. for better Tx performance try do some output when - * input is done - */ if (test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode) && test_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode)) { spin_lock(&mpu->output_lock); @@ -114,6 +105,22 @@ static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu) } } +static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu) +{ + if (mpu->info_flags & MPU401_INFO_INPUT) { + spin_lock(&mpu->input_lock); + if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) + snd_mpu401_uart_input_read(mpu); + else + snd_mpu401_uart_clear_rx(mpu); + spin_unlock(&mpu->input_lock); + } + if (! (mpu->info_flags & MPU401_INFO_TX_IRQ)) + /* ok. for better Tx performance try do some output + when input is done */ + uart_interrupt_tx(mpu); +} + /** * snd_mpu401_uart_interrupt - generic MPU401-UART interrupt handler * @irq: the irq number @@ -135,6 +142,27 @@ irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, EXPORT_SYMBOL(snd_mpu401_uart_interrupt); +/** + * snd_mpu401_uart_interrupt_tx - generic MPU401-UART transmit irq handler + * @irq: the irq number + * @dev_id: mpu401 instance + * @regs: the reigster + * + * Processes the interrupt for MPU401-UART output. + */ +irqreturn_t snd_mpu401_uart_interrupt_tx(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct snd_mpu401 *mpu = dev_id; + + if (mpu == NULL) + return IRQ_NONE; + uart_interrupt_tx(mpu); + return IRQ_HANDLED; +} + +EXPORT_SYMBOL(snd_mpu401_uart_interrupt_tx); + /* * timer callback * reprogram the timer and call the interrupt job @@ -430,14 +458,16 @@ snd_mpu401_uart_output_trigger(struct snd_rawmidi_substream *substream, int up) * since the output timer might have been removed in * snd_mpu401_uart_output_write(). */ - snd_mpu401_uart_add_timer(mpu, 0); + if (! (mpu->info_flags & MPU401_INFO_TX_IRQ)) + snd_mpu401_uart_add_timer(mpu, 0); /* output pending data */ spin_lock_irqsave(&mpu->output_lock, flags); snd_mpu401_uart_output_write(mpu); spin_unlock_irqrestore(&mpu->output_lock, flags); } else { - snd_mpu401_uart_remove_timer(mpu, 0); + if (! (mpu->info_flags & MPU401_INFO_TX_IRQ)) + snd_mpu401_uart_remove_timer(mpu, 0); clear_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode); } } @@ -475,7 +505,7 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi) * @device: the device index, zero-based * @hardware: the hardware type, MPU401_HW_XXXX * @port: the base address of MPU401 port - * @integrated: non-zero if the port was already reserved by the chip + * @info_flags: bitflags MPU401_INFO_XXX * @irq: the irq number, -1 if no interrupt for mpu * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved. * @rrawmidi: the pointer to store the new rawmidi instance @@ -490,17 +520,24 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi) */ int snd_mpu401_uart_new(struct snd_card *card, int device, unsigned short hardware, - unsigned long port, int integrated, + unsigned long port, + unsigned int info_flags, int irq, int irq_flags, struct snd_rawmidi ** rrawmidi) { struct snd_mpu401 *mpu; struct snd_rawmidi *rmidi; + int in_enable, out_enable; int err; if (rrawmidi) *rrawmidi = NULL; - if ((err = snd_rawmidi_new(card, "MPU-401U", device, 1, 1, &rmidi)) < 0) + if (! (info_flags & (MPU401_INFO_INPUT | MPU401_INFO_OUTPUT))) + info_flags |= MPU401_INFO_INPUT | MPU401_INFO_OUTPUT; + in_enable = (info_flags & MPU401_INFO_INPUT) ? 1 : 0; + out_enable = (info_flags & MPU401_INFO_OUTPUT) ? 1 : 0; + if ((err = snd_rawmidi_new(card, "MPU-401U", device, + out_enable, in_enable, &rmidi)) < 0) return err; mpu = kzalloc(sizeof(*mpu), GFP_KERNEL); if (mpu == NULL) { @@ -514,7 +551,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, spin_lock_init(&mpu->output_lock); spin_lock_init(&mpu->timer_lock); mpu->hardware = hardware; - if (!integrated) { + if (! (info_flags & MPU401_INFO_INTEGRATED)) { int res_size = hardware == MPU401_HW_PC98II ? 4 : 2; mpu->res = request_region(port, res_size, "MPU401 UART"); if (mpu->res == NULL) { @@ -525,15 +562,12 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, return -EBUSY; } } - switch (hardware) { - case MPU401_HW_AUREAL: + if (info_flags & MPU401_INFO_MMIO) { mpu->write = mpu401_write_mmio; mpu->read = mpu401_read_mmio; - break; - default: + } else { mpu->write = mpu401_write_port; mpu->read = mpu401_read_port; - break; } mpu->port = port; if (hardware == MPU401_HW_PC98II) @@ -549,6 +583,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, return -EBUSY; } } + mpu->info_flags = info_flags; mpu->irq = irq; mpu->irq_flags = irq_flags; if (card->shortname[0]) @@ -556,13 +591,18 @@ int snd_mpu401_uart_new(struct snd_card *card, int device, card->shortname); else sprintf(rmidi->name, "MPU-401 MIDI %d-%d",card->number, device); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, - &snd_mpu401_uart_output); - snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, - &snd_mpu401_uart_input); - rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT | - SNDRV_RAWMIDI_INFO_INPUT | - SNDRV_RAWMIDI_INFO_DUPLEX; + if (out_enable) { + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, + &snd_mpu401_uart_output); + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT; + } + if (in_enable) { + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &snd_mpu401_uart_input); + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT; + if (out_enable) + rmidi->info_flags |= SNDRV_RAWMIDI_INFO_DUPLEX; + } mpu->rmidi = rmidi; if (rrawmidi) *rrawmidi = rmidi; diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index d2a856f..27271c9 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -897,10 +897,9 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l struct snd_rawmidi *rawmidi; int err; -#define MPU401_SHARE_HARDWARE 1 if ((err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, - port, MPU401_SHARE_HARDWARE, + port, MPU401_INFO_INTEGRATED, irq, SA_INTERRUPT, &rawmidi)) == 0) { struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data; diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c index 60423b1..a9f0806 100644 --- a/sound/pci/als4000.c +++ b/sound/pci/als4000.c @@ -746,8 +746,8 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci, card->shortname, chip->alt_port, chip->irq); if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000, - gcr+0x30, 1, pci->irq, 0, - &chip->rmidi)) < 0) { + gcr+0x30, MPU401_INFO_INTEGRATED, + pci->irq, 0, &chip->rmidi)) < 0) { printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n", gcr+0x30); goto out_err; } diff --git a/sound/pci/au88x0/au88x0_mpu401.c b/sound/pci/au88x0/au88x0_mpu401.c index 1e128a3..5a0c535 100644 --- a/sound/pci/au88x0/au88x0_mpu401.c +++ b/sound/pci/au88x0/au88x0_mpu401.c @@ -95,7 +95,8 @@ static int __devinit snd_vortex_midi(vortex_t * vortex) port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA); if ((temp = snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port, - 1, 0, 0, &rmidi)) != 0) { + MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO, + 0, 0, &rmidi)) != 0) { hwwrite(vortex->mmio, VORTEX_CTRL, (hwread(vortex->mmio, VORTEX_CTRL) & ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN); diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index e68056c..6e62daf 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -1806,8 +1806,8 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) card->private_data = chip; if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401, - chip->mpu_port, 1, pci->irq, 0, - &chip->rmidi)) < 0) { + chip->mpu_port, MPU401_INFO_INTEGRATED, + pci->irq, 0, &chip->rmidi)) < 0) { snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); goto out_err; } diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c index cb475ad..79bc60a 100644 --- a/sound/pci/cmipci.c +++ b/sound/pci/cmipci.c @@ -2981,7 +2981,9 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc if (iomidi > 0) { if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI, - iomidi, integrated_midi, + iomidi, + (integrated_midi ? + MPU401_INFO_INTEGRATED : 0), cm->irq, 0, &cm->rmidi)) < 0) { printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi); } diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c index 8f46190..f61c4fa 100644 --- a/sound/pci/cs5535audio/cs5535audio.c +++ b/sound/pci/cs5535audio/cs5535audio.c @@ -56,17 +56,16 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { {} }; -static int index = SNDRV_DEFAULT_IDX1; -static char *id = SNDRV_DEFAULT_STR1; -/* for backward compatibility */ -static int enable; +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; -module_param(index, int, 0444); +module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for " DRIVER_NAME); -module_param(id, charp, 0444); +module_param_array(id, charp, NULL, 0444); MODULE_PARM_DESC(id, "ID string for " DRIVER_NAME); -module_param(enable, bool, 0444); -MODULE_PARM_DESC(enable, "Enable for " DRIVER_NAME); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " DRIVER_NAME); static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = { { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO) }, @@ -358,8 +357,12 @@ static int __devinit snd_cs5535audio_probe(struct pci_dev *pci, if (dev >= SNDRV_CARDS) return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } - card = snd_card_new(index, id, THIS_MODULE, 0); + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); if (card == NULL) return -ENOMEM; diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c index 6f9094c..ca6603f 100644 --- a/sound/pci/es1938.c +++ b/sound/pci/es1938.c @@ -1756,7 +1756,8 @@ static int __devinit snd_es1938_probe(struct pci_dev *pci, } } if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, - chip->mpu_port, 1, chip->irq, 0, &chip->rmidi) < 0) { + chip->mpu_port, MPU401_INFO_INTEGRATED, + chip->irq, 0, &chip->rmidi) < 0) { printk(KERN_ERR "es1938: unable to initialize MPU-401\n"); } else { // this line is vital for MIDI interrupt handling on ess-solo1 diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c index f43bd38..bfa0876 100644 --- a/sound/pci/es1968.c +++ b/sound/pci/es1968.c @@ -2727,7 +2727,8 @@ static int __devinit snd_es1968_probe(struct pci_dev *pci, } if (enable_mpu[dev]) { if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, - chip->io_port + ESM_MPU401_PORT, 1, + chip->io_port + ESM_MPU401_PORT, + MPU401_INFO_INTEGRATED, chip->irq, 0, &chip->rmidi)) < 0) { printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n"); } diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index 0ec90f3..0afa573 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -1448,7 +1448,8 @@ static int __devinit snd_card_fm801_probe(struct pci_dev *pci, return err; } if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801, - FM801_REG(chip, MPU401_DATA), 1, + FM801_REG(chip, MPU401_DATA), + MPU401_INFO_INTEGRATED, chip->irq, 0, &chip->rmidi)) < 0) { snd_card_free(card); return err; diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c index 52de85e..00e565e 100644 --- a/sound/pci/ice1712/ice1712.c +++ b/sound/pci/ice1712/ice1712.c @@ -2737,7 +2737,8 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci, if (! c->no_mpu401) { if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712, - ICEREG(ice, MPU1_CTRL), 1, + ICEREG(ice, MPU1_CTRL), + MPU401_INFO_INTEGRATED, ice->irq, 0, &ice->rmidi[0])) < 0) { snd_card_free(card); @@ -2752,7 +2753,8 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci, if (ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_2xMPU401) { /* 2nd port used */ if ((err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712, - ICEREG(ice, MPU2_CTRL), 1, + ICEREG(ice, MPU2_CTRL), + MPU401_INFO_INTEGRATED, ice->irq, 0, &ice->rmidi[1])) < 0) { snd_card_free(card); diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 1031bcb..34a58c6 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -2388,7 +2388,8 @@ static int __devinit snd_vt1724_probe(struct pci_dev *pci, if (! c->no_mpu401) { if (ice->eeprom.data[ICE_EEP2_SYSCONF] & VT1724_CFG_MPU401) { if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712, - ICEREG1724(ice, MPU_CTRL), 1, + ICEREG1724(ice, MPU_CTRL), + MPU401_INFO_INTEGRATED, ice->irq, 0, &ice->rmidi[0])) < 0) { snd_card_free(card); diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c index 1928e06..1c344fb 100644 --- a/sound/pci/maestro3.c +++ b/sound/pci/maestro3.c @@ -2861,7 +2861,8 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) #if 0 /* TODO: not supported yet */ /* TODO enable MIDI IRQ and I/O */ err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401, - chip->iobase + MPU401_DATA_PORT, 1, + chip->iobase + MPU401_DATA_PORT, + MPU401_INFO_INTEGRATED, chip->irq, 0, &chip->rmidi); if (err < 0) printk(KERN_WARNING "maestro3: no MIDI support.\n"); diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c index 5177570..dcf4029 100644 --- a/sound/pci/sonicvibes.c +++ b/sound/pci/sonicvibes.c @@ -1456,7 +1456,7 @@ static int __devinit snd_sonic_probe(struct pci_dev *pci, return err; } if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES, - sonic->midi_port, 1, + sonic->midi_port, MPU401_INFO_INTEGRATED, sonic->irq, 0, &midi_uart)) < 0) { snd_card_free(card); diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c index 9624a5f..5629b7e 100644 --- a/sound/pci/trident/trident.c +++ b/sound/pci/trident/trident.c @@ -148,7 +148,8 @@ static int __devinit snd_trident_probe(struct pci_dev *pci, } if (trident->device != TRIDENT_DEVICE_ID_SI7018 && (err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE, - trident->midi_port, 1, + trident->midi_port, + MPU401_INFO_INTEGRATED, trident->irq, 0, &trident->rmidi)) < 0) { snd_card_free(card); return err; diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index a1b777e..12ce22e 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -1973,7 +1973,7 @@ static int __devinit snd_via686_init_misc(struct via82xx *chip) pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg); if (chip->mpu_res) { if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A, - mpu_port, 1, + mpu_port, MPU401_INFO_INTEGRATED, chip->irq, 0, &chip->rmidi) < 0) { printk(KERN_WARNING "unable to initialize MPU-401" " at 0x%lx, skipping\n", mpu_port); diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index 65ebf5f..26aa775 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -308,7 +308,8 @@ static int __devinit snd_card_ymfpci_probe(struct pci_dev *pci, } if (chip->mpu_res) { if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI, - mpu_port[dev], 1, + mpu_port[dev], + MPU401_INFO_INTEGRATED, pci->irq, 0, &chip->rawmidi)) < 0) { printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]); legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */ |