diff options
-rw-r--r-- | arch/ppc/8xx_io/enet.c | 52 | ||||
-rw-r--r-- | arch/ppc/Kconfig | 22 | ||||
-rw-r--r-- | arch/ppc/configs/mpc86x_ads_defconfig | 633 | ||||
-rw-r--r-- | arch/ppc/configs/mpc885ads_defconfig | 622 | ||||
-rw-r--r-- | arch/ppc/platforms/fads.h | 109 | ||||
-rw-r--r-- | arch/ppc/platforms/mpc885ads.h | 92 | ||||
-rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.c | 32 | ||||
-rw-r--r-- | include/asm-ppc/mpc8xx.h | 4 |
8 files changed, 1550 insertions, 16 deletions
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index 4ea7158..ece6a9f 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -714,16 +714,24 @@ static int __init scc_enet_init(void) immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ #endif /* PC_ENET_LBK */ - /* Configure port C pins to enable CLSN and RENA. +#ifdef PE_ENET_TCLK + /* Configure port E for TCLK and RCLK. */ - immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); - + cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK); +#else /* Configure port A for TCLK and RCLK. */ immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); +#endif + + /* Configure port C pins to enable CLSN and RENA. + */ + immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); /* Configure Serial Interface clock routing. * First, clear all SCC bits to zero, then set the ones we want. @@ -896,14 +904,18 @@ static int __init scc_enet_init(void) /* It is now OK to enable the Ethernet transmitter. * Unfortunately, there are board implementation differences here. */ -#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA)) +#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) immap->im_ioport.iop_pcpar |= PC_ENET_TENA; immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA)) +#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) cp->cp_pbpar |= PB_ENET_TENA; cp->cp_pbdir |= PB_ENET_TENA; +#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA)) + cp->cp_pepar |= PE_ENET_TENA; + cp->cp_pedir &= ~PE_ENET_TENA; + cp->cp_peso |= PE_ENET_TENA; #else -#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA +#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA #endif #if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) @@ -936,6 +948,29 @@ static int __init scc_enet_init(void) *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; #endif +#ifdef CONFIG_MPC885ADS + + /* Deassert PHY reset and enable the PHY. + */ + { + volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); + uint tmp; + + tmp = in_be32(bcsr + 1 /* BCSR1 */); + tmp |= BCSR1_ETHEN; + out_be32(bcsr + 1, tmp); + tmp = in_be32(bcsr + 4 /* BCSR4 */); + tmp |= BCSR4_ETH10_RST; + out_be32(bcsr + 4, tmp); + iounmap(bcsr); + } + + /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode + * upon reset. SCC is set to half duplex by default. So this + * inconsistency should be better fixed by the software. + */ +#endif + dev->base_addr = (unsigned long)ep; #if 0 dev->name = "CPM_ENET"; @@ -969,3 +1004,4 @@ static int __init scc_enet_init(void) } module_init(scc_enet_init); + diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index a7835cd..23b0d2f 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -284,6 +284,9 @@ endmenu menu "Platform options" +config FADS + bool + choice prompt "8xx Machine Type" depends on 8xx @@ -399,8 +402,25 @@ config BSEIP 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video controller, and two RS232 ports. -config FADS +config MPC8XXFADS bool "FADS" + select FADS + +config MPC86XADS + bool "MPC86XADS" + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + select FADS + +config MPC885ADS + bool "MPC885ADS" + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. config TQM823L bool "TQM823L" diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig new file mode 100644 index 0000000..f63c6f5 --- /dev/null +++ b/arch/ppc/configs/mpc86x_ads_defconfig @@ -0,0 +1,633 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue Jun 14 13:36:35 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_SHMEM is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +CONFIG_FADS=y +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_MPC8XXFADS is not set +CONFIG_MPC86XADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +CONFIG_SCC1_ENET=y +# CONFIG_SCC2_ENET is not set +# CONFIG_SCC3_ENET is not set +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +# CONFIG_8xx_COPYBACK is not set +# CONFIG_8xx_CPU6 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig new file mode 100644 index 0000000..016f94d --- /dev/null +++ b/arch/ppc/configs/mpc885ads_defconfig @@ -0,0 +1,622 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc6 +# Thu Jun 9 21:17:29 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_FADS is not set +CONFIG_MPC885ADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +# CONFIG_SCC1_ENET is not set +# CONFIG_SCC2_ENET is not set +CONFIG_SCC3_ENET=y +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +CONFIG_8xx_CPU6=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index 632b817..b60c564 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -3,7 +3,18 @@ * the Motorola 860T FADS board. Copied from the MBX stuff. * * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) + * + * Added MPC86XADS support. + * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS + * for SW point of view". This is 99% correct. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. */ + #ifdef __KERNEL__ #ifndef __ASM_FADS_H__ #define __ASM_FADS_H__ @@ -12,18 +23,45 @@ #include <asm/ppcboot.h> +#if defined(CONFIG_MPC86XADS) + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) + +/* MPC86XADS has one more CPLD and an additional BCSR. + */ +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* There is no PHY link change interrupt */ +#define PHY_INTERRUPT (-1) + +#else /* FADS */ + /* Memory map is configured by the PROM startup. * I tried to follow the FADS manual, although the startup PROM * dictates this and we simply have to move some of the physical * addresses for Linux. */ #define BCSR_ADDR ((uint)0xff010000) + +/* PHY link change interrupt */ +#define PHY_INTERRUPT SIU_IRQ2 + +#endif /* CONFIG_MPC86XADS */ + #define BCSR_SIZE ((uint)(64 * 1024)) -#define BCSR0 ((uint)0xff010000) -#define BCSR1 ((uint)0xff010004) -#define BCSR2 ((uint)0xff010008) -#define BCSR3 ((uint)0xff01000c) -#define BCSR4 ((uint)0xff010010) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) #define IMAP_ADDR ((uint)0xff000000) #define IMAP_SIZE ((uint)(64 * 1024)) @@ -34,8 +72,17 @@ /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) #define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) #define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + #define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ #define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ #define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ @@ -44,14 +91,64 @@ #define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ #define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ +/* IO_BASE definition for pcmcia. + */ +#define _IO_BASE 0x80000000 +#define _IO_BASE_SIZE 0x1000 + +#ifdef CONFIG_IDE +#define MAX_HWIFS 1 +#endif + /* Interrupt level assignments. */ #define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ -#define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */ /* We don't use the 8259. */ #define NR_8259_INTS 0 +/* CPM Ethernet through SCC1 or SCC2 */ + +#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00001000) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) +#endif /* CONFIG_SCC1_ENET */ + +#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0400) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* Control bits in the SICR to route TCLK and RCLK to + * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002e00) +#endif /* CONFIG_SCC2_ENET */ + #endif /* __ASM_FADS_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h new file mode 100644 index 0000000..eb38663 --- /dev/null +++ b/arch/ppc/platforms/mpc885ads.h @@ -0,0 +1,92 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include <linux/config.h> + +#include <asm/ppcboot.h> + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) +#define BCSR_SIZE ((uint)32) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) + +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define IMAP_ADDR ((uint)0xff000000) +#define IMAP_SIZE ((uint)(64 * 1024)) + +#define PCMCIA_MEM_ADDR ((uint)0xff020000) +#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* Interrupt level assignments */ +#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ +#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ +#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ +#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ + +/* We don't use the 8259 */ +#define NR_8259_INTS 0 + +/* CPM Ethernet through SCC3 */ +#define PA_ENET_RXD ((ushort)0x0040) +#define PA_ENET_TXD ((ushort)0x0080) +#define PE_ENET_TCLK ((uint)0x00004000) +#define PE_ENET_RCLK ((uint)0x00008000) +#define PE_ENET_TENA ((uint)0x00000010) +#define PC_ENET_CLSN ((ushort)0x0400) +#define PC_ENET_RENA ((ushort)0x0800) + +/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ +#define SICR_ENET_MASK ((uint)0x00ff0000) +#define SICR_ENET_CLKRT ((uint)0x002c0000) + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index de26cf7..7911912 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -94,12 +94,42 @@ void smc1_lineif(struct uart_cpm_port *pinfo) ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; } +#ifdef CONFIG_MPC885ADS + /* Enable SMC1 transceivers */ + { + volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4); + uint tmp; + + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_1; + out_be32(bcsr1, tmp); + iounmap(bcsr1); + } +#endif + pinfo->brg = 1; } void smc2_lineif(struct uart_cpm_port *pinfo) { - /* XXX SMC2: insert port configuration here */ +#ifdef CONFIG_MPC885ADS + volatile cpm8xx_t *cp = cpmp; + volatile uint __iomem *bcsr1; + uint tmp; + + cp->cp_pepar |= 0x00000c00; + cp->cp_pedir &= ~0x00000c00; + cp->cp_peso &= ~0x00000400; + cp->cp_peso |= 0x00000800; + + /* Enable SMC2 transceivers */ + bcsr1 = ioremap(BCSR1, 4); + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_2; + out_be32(bcsr1, tmp); + iounmap(bcsr1); +#endif + pinfo->brg = 2; } diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index 714d69c..7c31f2d 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -68,6 +68,10 @@ #include <platforms/lantec.h> #endif +#if defined(CONFIG_MPC885ADS) +#include <platforms/mpc885ads.h> +#endif + /* Currently, all 8xx boards that support a processor to PCI/ISA bridge * use the same memory map. */ |