diff options
Diffstat (limited to 'arch/arm/mach-mxs/mach-mx28evk.c')
| -rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 89 |
1 files changed, 89 insertions, 0 deletions
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 08002d0..bb329b9 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -34,6 +34,11 @@ #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) +#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) +#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) +#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) +#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29) + static const iomux_cfg_t mx28evk_pads[] __initconst = { /* duart */ MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, @@ -115,6 +120,65 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, /* backlight control */ MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_SSP1_SCK__GPIO_2_12 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM3__GPIO_3_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* mmc1 */ + MX28_PAD_GPMI_D00__SSP1_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D01__SSP1_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D02__SSP1_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D03__SSP1_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D04__SSP1_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D05__SSP1_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D06__SSP1_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_D07__SSP1_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY1__SSP1_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_GPMI_WRN__SSP1_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* write protect */ + MX28_PAD_GPMI_RESETN__GPIO_0_28 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* slot power enable */ + MX28_PAD_PWM4__GPIO_3_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; /* fec */ @@ -258,6 +322,18 @@ static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { .ld_intf_width = STMLCDIF_24BIT, }; +static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { + { + /* mmc0 */ + .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, { + /* mmc1 */ + .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, + .flags = SLOTF_8_BIT_CAPABLE, + }, +}; + static void __init mx28evk_init(void) { int ret; @@ -297,6 +373,19 @@ static void __init mx28evk_init(void) gpio_set_value(MX28EVK_BL_ENABLE, 1); mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + + /* power on mmc slot by writing 0 to the gpio */ + ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_DIR_OUT, + "mmc0-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + + ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_DIR_OUT, + "mmc1-slot-power"); + if (ret) + pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); } static void __init mx28evk_timer_init(void) |