diff options
Diffstat (limited to 'arch/arm/mach-omap/board-h2.c')
| -rw-r--r-- | arch/arm/mach-omap/board-h2.c | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap/board-h2.c new file mode 100644 index 0000000..1f06783 --- /dev/null +++ b/arch/arm/mach-omap/board-h2.c @@ -0,0 +1,187 @@ +/* + * linux/arch/arm/mach-omap/board-h2.c + * + * Board specific inits for OMAP-1610 H2 + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: Greg Lonnon <glonnon@ridgerun.com> + * + * Copyright (C) 2002 MontaVista Software, Inc. + * + * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6 + * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com> + * + * H2 specific changes and cleanup + * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/map.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/tc.h> +#include <asm/arch/usb.h> + +#include "common.h" + +extern int omap_gpio_init(void); + +static int __initdata h2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1}; + +static struct mtd_partition h2_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data h2_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = h2_partitions, + .nr_parts = ARRAY_SIZE(h2_partitions), +}; + +static struct resource h2_flash_resource = { + .start = OMAP_CS2B_PHYS, + .end = OMAP_CS2B_PHYS + OMAP_CS2B_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device h2_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &h2_flash_data, + }, + .num_resources = 1, + .resource = &h2_flash_resource, +}; + +static struct resource h2_smc91x_resources[] = { + [0] = { + .start = OMAP1610_ETHR_START, /* Physical */ + .end = OMAP1610_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(0), + .end = OMAP_GPIO_IRQ(0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device h2_smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(h2_smc91x_resources), + .resource = h2_smc91x_resources, +}; + +static struct platform_device *h2_devices[] __initdata = { + &h2_flash_device, + &h2_smc91x_device, +}; + +static void __init h2_init_smc91x(void) +{ + if ((omap_request_gpio(0)) < 0) { + printk("Error requesting gpio 0 for smc91x irq\n"); + return; + } + omap_set_gpio_edge_ctrl(0, OMAP_GPIO_FALLING_EDGE); +} + +void h2_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + h2_init_smc91x(); +} + +static struct omap_usb_config h2_usb_config __initdata = { + /* usb1 has a Mini-AB port and external isp1301 transceiver */ + .otg = 2, + +#ifdef CONFIG_USB_GADGET_OMAP + .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled + // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) +#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) + /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ + .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled +#endif + + .pins[1] = 3, +}; + +static struct omap_mmc_config h2_mmc_config __initdata = { + .mmc_blocks = 1, + .mmc1_power_pin = -1, /* tps65010 gpio3 */ + .mmc1_switch_pin = OMAP_MPUIO(1), +}; + +static struct omap_board_config_kernel h2_config[] = { + { OMAP_TAG_USB, &h2_usb_config }, + { OMAP_TAG_MMC, &h2_mmc_config }, +}; + +static void __init h2_init(void) +{ + platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); + omap_board_config = h2_config; + omap_board_config_size = ARRAY_SIZE(h2_config); +} + +static void __init h2_map_io(void) +{ + omap_map_io(); + omap_serial_init(h2_serial_ports); +} + +MACHINE_START(OMAP_H2, "TI-H2") + MAINTAINER("Imre Deak <imre.deak@nokia.com>") + BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) + BOOT_PARAMS(0x10000100) + MAPIO(h2_map_io) + INITIRQ(h2_init_irq) + INIT_MACHINE(h2_init) + .timer = &omap_timer, +MACHINE_END |