1 files changed, 0 insertions, 121 deletions
diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c
deleted file mode 100644
index cce8c24..0000000
--- a/arch/arm/mach-s5p6442/dev-spi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* linux/arch/arm/mach-s5p6442/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- *	Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
-	[S5P6442_SPI_SRCCLK_PCLK] = "pclk",
-	[S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
-{
-	switch (pdev->id) {
-	case 0:
-		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
-				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "Invalid SPI Controller number!");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct resource s5p6442_spi0_resource[] = {
-	[0] = {
-		.start = S5P6442_PA_SPI,
-		.end   = S5P6442_PA_SPI + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DMACH_SPI0_TX,
-		.end   = DMACH_SPI0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = DMACH_SPI0_RX,
-		.end   = DMACH_SPI0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-	[3] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
-	.cfg_gpio = s5p6442_spi_cfg_gpio,
-	.fifo_lvl_mask = 0x1ff,
-	.rx_lvl_offset = 15,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p6442_device_spi = {
-	.name		  = "s3c64xx-spi",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s5p6442_spi0_resource),
-	.resource	  = s5p6442_spi0_resource,
-	.dev = {
-		.dma_mask		= &spi_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data = &s5p6442_spi0_pdata,
-	},
-};
-
-void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
-	struct s3c64xx_spi_info *pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0
-			|| src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
-		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	switch (cntrlr) {
-	case 0:
-		pd = &s5p6442_spi0_pdata;
-		break;
-	default:
-		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
-							__func__, cntrlr);
-		return;
-	}
-
-	pd->num_cs = num_cs;
-	pd->src_clk_nr = src_clk_nr;
-	pd->src_clk_name = spi_src_clks[src_clk_nr];
-}