diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 93 |
1 files changed, 54 insertions, 39 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 40cc5da..9792285 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1013,8 +1013,8 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) DRM_DEBUG_KMS("vblank wait timed out\n"); } -/** - * intel_wait_for_vblank_off - wait for vblank after disabling a pipe +/* + * intel_wait_for_pipe_off - wait for pipe to turn off * @dev: drm device * @pipe: pipe to wait for * @@ -1022,25 +1022,39 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) * spinning on the vblank interrupt status bit, since we won't actually * see an interrupt when the pipe is disabled. * - * So this function waits for the display line value to settle (it - * usually ends up stopping at the start of the next frame). + * On Gen4 and above: + * wait for the pipe register state bit to turn off + * + * Otherwise: + * wait for the display line value to settle (it usually + * ends up stopping at the start of the next frame). + * */ -void intel_wait_for_vblank_off(struct drm_device *dev, int pipe) +static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; - int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); - unsigned long timeout = jiffies + msecs_to_jiffies(100); - u32 last_line; - - /* Wait for the display line to settle */ - do { - last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; - mdelay(5); - } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && - time_after(timeout, jiffies)); - - if (time_after(jiffies, timeout)) - DRM_DEBUG_KMS("vblank wait timed out\n"); + + if (INTEL_INFO(dev)->gen >= 4) { + int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF); + + /* Wait for the Pipe State to go off */ + if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0, + 100, 0)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } else { + u32 last_line; + int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL); + unsigned long timeout = jiffies + msecs_to_jiffies(100); + + /* Wait for the display line to settle */ + do { + last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK; + mdelay(5); + } while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) && + time_after(timeout, jiffies)); + if (time_after(jiffies, timeout)) + DRM_DEBUG_KMS("pipe_off wait timed out\n"); + } } /* Parameters have changed, update FBC info */ @@ -2328,13 +2342,13 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(dspbase_reg); } - /* Wait for vblank for the disable to take effect */ - intel_wait_for_vblank_off(dev, pipe); - /* Don't disable pipe A or pipe A PLLs if needed */ if (pipeconf_reg == PIPEACONF && - (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + (dev_priv->quirks & QUIRK_PIPEA_FORCE)) { + /* Wait for vblank for the disable to take effect */ + intel_wait_for_vblank(dev, pipe); goto skip_pipe_off; + } /* Next, disable display pipes */ temp = I915_READ(pipeconf_reg); @@ -2343,8 +2357,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) I915_READ(pipeconf_reg); } - /* Wait for vblank for the disable to take effect. */ - intel_wait_for_vblank_off(dev, pipe); + /* Wait for the pipe to turn off */ + intel_wait_for_pipe_off(dev, pipe); temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) != 0) { @@ -2463,11 +2477,19 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = crtc->dev; + if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4) return false; } + + /* XXX some encoders set the crtcinfo, others don't. + * Obviously we need some form of conflict resolution here... + */ + if (adjusted_mode->crtc_htotal == 0) + drm_mode_set_crtcinfo(adjusted_mode, 0); + return true; } @@ -2767,14 +2789,8 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, /* Don't promote wm_size to unsigned... */ if (wm_size > (long)wm->max_wm) wm_size = wm->max_wm; - if (wm_size <= 0) { + if (wm_size <= 0) wm_size = wm->default_wm; - DRM_ERROR("Insufficient FIFO for plane, expect flickering:" - " entries required = %ld, available = %lu.\n", - entries_required + wm->guard_size, - wm->fifo_size); - } - return wm_size; } @@ -3388,8 +3404,7 @@ static void ironlake_update_wm(struct drm_device *dev, int planea_clock, reg_value = I915_READ(WM1_LP_ILK); reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK | WM1_LP_CURSOR_MASK); - reg_value |= WM1_LP_SR_EN | - (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | + reg_value |= (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) | (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm; I915_WRITE(WM1_LP_ILK, reg_value); @@ -5675,6 +5690,9 @@ void intel_init_clock_gating(struct drm_device *dev) I915_WRITE(DISP_ARB_CTL, (I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS)); + I915_WRITE(WM3_LP_ILK, 0); + I915_WRITE(WM2_LP_ILK, 0); + I915_WRITE(WM1_LP_ILK, 0); } /* * Based on the document from hardware guys the following bits @@ -5696,8 +5714,7 @@ void intel_init_clock_gating(struct drm_device *dev) ILK_DPFC_DIS2 | ILK_CLK_FBC); } - if (IS_GEN6(dev)) - return; + return; } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); @@ -5758,11 +5775,9 @@ void intel_init_clock_gating(struct drm_device *dev) OUT_RING(MI_FLUSH); ADVANCE_LP_RING(); } - } else { + } else DRM_DEBUG_KMS("Failed to allocate render context." - "Disable RC6\n"); - return; - } + "Disable RC6\n"); } if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) { |