diff options
Diffstat (limited to 'drivers/hwmon/lm87.c')
| -rw-r--r-- | drivers/hwmon/lm87.c | 828 |
1 files changed, 828 insertions, 0 deletions
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c new file mode 100644 index 0000000..1921ed1 --- /dev/null +++ b/drivers/hwmon/lm87.c @@ -0,0 +1,828 @@ +/* + * lm87.c + * + * Copyright (C) 2000 Frodo Looijaard <frodol@dds.nl> + * Philip Edelbrock <phil@netroedge.com> + * Stephen Rousset <stephen.rousset@rocketlogix.com> + * Dan Eaton <dan.eaton@rocketlogix.com> + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * Original port to Linux 2.6 by Jeff Oliver. + * + * The LM87 is a sensor chip made by National Semiconductor. It monitors up + * to 8 voltages (including its own power source), up to three temperatures + * (its own plus up to two external ones) and up to two fans. The default + * configuration is 6 voltages, two temperatures and two fans (see below). + * Voltages are scaled internally with ratios such that the nominal value of + * each voltage correspond to a register value of 192 (which means a + * resolution of about 0.5% of the nominal value). Temperature values are + * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete + * datasheet can be obtained from National's website at: + * http://www.national.com/pf/LM/LM87.html + * + * Some functions share pins, so not all functions are available at the same + * time. Which are depends on the hardware setup. This driver assumes that + * the BIOS configured the chip correctly. In that respect, it differs from + * the original driver (from lm_sensors for Linux 2.4), which would force the + * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual + * chipset wiring. + * For reference, here is the list of exclusive functions: + * - in0+in5 (default) or temp3 + * - fan1 (default) or in6 + * - fan2 (default) or in7 + * - VID lines (default) or IRQ lines (not handled by this driver) + * + * The LM87 additionally features an analog output, supposedly usable to + * control the speed of a fan. All new chips use pulse width modulation + * instead. The LM87 is the only hardware monitoring chipset I know of + * which uses amplitude modulation. Be careful when using this feature. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/i2c.h> +#include <linux/i2c-sensor.h> +#include <linux/i2c-vid.h> + +/* + * Addresses to scan + * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e. + */ + +static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; +static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; + +/* + * Insmod parameters + */ + +SENSORS_INSMOD_1(lm87); + +/* + * The LM87 registers + */ + +/* nr in 0..5 */ +#define LM87_REG_IN(nr) (0x20 + (nr)) +#define LM87_REG_IN_MAX(nr) (0x2B + (nr) * 2) +#define LM87_REG_IN_MIN(nr) (0x2C + (nr) * 2) +/* nr in 0..1 */ +#define LM87_REG_AIN(nr) (0x28 + (nr)) +#define LM87_REG_AIN_MIN(nr) (0x1A + (nr)) +#define LM87_REG_AIN_MAX(nr) (0x3B + (nr)) + +static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 }; +static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B }; +static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; + +#define LM87_REG_TEMP_HW_INT_LOCK 0x13 +#define LM87_REG_TEMP_HW_EXT_LOCK 0x14 +#define LM87_REG_TEMP_HW_INT 0x17 +#define LM87_REG_TEMP_HW_EXT 0x18 + +/* nr in 0..1 */ +#define LM87_REG_FAN(nr) (0x28 + (nr)) +#define LM87_REG_FAN_MIN(nr) (0x3B + (nr)) +#define LM87_REG_AOUT 0x19 + +#define LM87_REG_CONFIG 0x40 +#define LM87_REG_CHANNEL_MODE 0x16 +#define LM87_REG_VID_FAN_DIV 0x47 +#define LM87_REG_VID4 0x49 + +#define LM87_REG_ALARMS1 0x41 +#define LM87_REG_ALARMS2 0x42 + +#define LM87_REG_COMPANY_ID 0x3E +#define LM87_REG_REVISION 0x3F + +/* + * Conversions and various macros + * The LM87 uses signed 8-bit values for temperatures. + */ + +#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) +#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ + (val) * 192 >= (scale) * 255 ? 255 : \ + ((val) * 192 + (scale)/2) / (scale)) + +#define TEMP_FROM_REG(reg) ((reg) * 1000) +#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ + (val) >= 126500 ? 127 : \ + (((val) < 0 ? (val)-500 : (val)+500) / 1000)) + +#define FAN_FROM_REG(reg,div) ((reg) == 255 || (reg) == 0 ? 0 : \ + 1350000 + (reg)*(div) / 2) / ((reg)*(div)) +#define FAN_TO_REG(val,div) ((val)*(div) * 255 <= 1350000 ? 255 : \ + (1350000 + (val)*(div) / 2) / ((val)*(div))) + +#define FAN_DIV_FROM_REG(reg) (1 << (reg)) + +/* analog out is 9.80mV/LSB */ +#define AOUT_FROM_REG(reg) (((reg) * 98 + 5) / 10) +#define AOUT_TO_REG(val) ((val) <= 0 ? 0 : \ + (val) >= 2500 ? 255 : \ + ((val) * 10 + 49) / 98) + +/* nr in 0..1 */ +#define CHAN_NO_FAN(nr) (1 << (nr)) +#define CHAN_TEMP3 (1 << 2) +#define CHAN_VCC_5V (1 << 3) +#define CHAN_NO_VID (1 << 8) + +/* + * Functions declaration + */ + +static int lm87_attach_adapter(struct i2c_adapter *adapter); +static int lm87_detect(struct i2c_adapter *adapter, int address, int kind); +static void lm87_init_client(struct i2c_client *client); +static int lm87_detach_client(struct i2c_client *client); +static struct lm87_data *lm87_update_device(struct device *dev); + +/* + * Driver data (common to all clients) + */ + +static struct i2c_driver lm87_driver = { + .owner = THIS_MODULE, + .name = "lm87", + .id = I2C_DRIVERID_LM87, + .flags = I2C_DF_NOTIFY, + .attach_adapter = lm87_attach_adapter, + .detach_client = lm87_detach_client, +}; + +/* + * Client data (each client gets its own) + */ + +struct lm87_data { + struct i2c_client client; + struct semaphore update_lock; + char valid; /* zero until following fields are valid */ + unsigned long last_updated; /* In jiffies */ + + u8 channel; /* register value */ + + u8 in[8]; /* register value */ + u8 in_max[8]; /* register value */ + u8 in_min[8]; /* register value */ + u16 in_scale[8]; + + s8 temp[3]; /* register value */ + s8 temp_high[3]; /* register value */ + s8 temp_low[3]; /* register value */ + s8 temp_crit_int; /* min of two register values */ + s8 temp_crit_ext; /* min of two register values */ + + u8 fan[2]; /* register value */ + u8 fan_min[2]; /* register value */ + u8 fan_div[2]; /* register value, shifted right */ + u8 aout; /* register value */ + + u16 alarms; /* register values, combined */ + u8 vid; /* register values, combined */ + u8 vrm; +}; + +/* + * Sysfs stuff + */ + +static inline int lm87_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +#define show_in(offset) \ +static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ + data->in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ + data->in_scale[offset])); \ +} \ +static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ + data->in_scale[offset])); \ +} \ +static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ + show_in##offset##_input, NULL); +show_in(0); +show_in(1); +show_in(2); +show_in(3); +show_in(4); +show_in(5); +show_in(6); +show_in(7); + +static void set_in_min(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]); + lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) : + LM87_REG_AIN_MIN(nr-6), data->in_min[nr]); + up(&data->update_lock); +} + +static void set_in_max(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]); + lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) : + LM87_REG_AIN_MAX(nr-6), data->in_max[nr]); + up(&data->update_lock); +} + +#define set_in(offset) \ +static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + set_in_min(dev, buf, offset); \ + return count; \ +} \ +static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + set_in_max(dev, buf, offset); \ + return count; \ +} \ +static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ + show_in##offset##_min, set_in##offset##_min); \ +static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ + show_in##offset##_max, set_in##offset##_max); +set_in(0); +set_in(1); +set_in(2); +set_in(3); +set_in(4); +set_in(5); +set_in(6); +set_in(7); + +#define show_temp(offset) \ +static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ +} \ +static ssize_t show_temp##offset##_low(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \ +} \ +static ssize_t show_temp##offset##_high(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \ +}\ +static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ + show_temp##offset##_input, NULL); +show_temp(1); +show_temp(2); +show_temp(3); + +static void set_temp_low(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_low[nr] = TEMP_TO_REG(val); + lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]); + up(&data->update_lock); +} + +static void set_temp_high(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->temp_high[nr] = TEMP_TO_REG(val); + lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]); + up(&data->update_lock); +} + +#define set_temp(offset) \ +static ssize_t set_temp##offset##_low(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + set_temp_low(dev, buf, offset-1); \ + return count; \ +} \ +static ssize_t set_temp##offset##_high(struct device *dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + set_temp_high(dev, buf, offset-1); \ + return count; \ +} \ +static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ + show_temp##offset##_high, set_temp##offset##_high); \ +static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ + show_temp##offset##_low, set_temp##offset##_low); +set_temp(1); +set_temp(2); +set_temp(3); + +static ssize_t show_temp_crit_int(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int)); +} + +static ssize_t show_temp_crit_ext(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext)); +} + +static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL); +static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL); +static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL); + +#define show_fan(offset) \ +static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \ + FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \ + FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ +} \ +static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct lm87_data *data = lm87_update_device(dev); \ + return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \ +} \ +static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ + show_fan##offset##_input, NULL); +show_fan(1); +show_fan(2); + +static void set_fan_min(struct device *dev, const char *buf, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->fan_min[nr] = FAN_TO_REG(val, + FAN_DIV_FROM_REG(data->fan_div[nr])); + lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]); + up(&data->update_lock); +} + +/* Note: we save and restore the fan minimum here, because its value is + determined in part by the fan clock divider. This follows the principle + of least suprise; the user doesn't expect the fan minimum to change just + because the divider changed. */ +static ssize_t set_fan_div(struct device *dev, const char *buf, + size_t count, int nr) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + unsigned long min; + u8 reg; + + down(&data->update_lock); + min = FAN_FROM_REG(data->fan_min[nr], + FAN_DIV_FROM_REG(data->fan_div[nr])); + + switch (val) { + case 1: data->fan_div[nr] = 0; break; + case 2: data->fan_div[nr] = 1; break; + case 4: data->fan_div[nr] = 2; break; + case 8: data->fan_div[nr] = 3; break; + default: + up(&data->update_lock); + return -EINVAL; + } + + reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV); + switch (nr) { + case 0: + reg = (reg & 0xCF) | (data->fan_div[0] << 4); + break; + case 1: + reg = (reg & 0x3F) | (data->fan_div[1] << 6); + break; + } + lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg); + + data->fan_min[nr] = FAN_TO_REG(min, val); + lm87_write_value(client, LM87_REG_FAN_MIN(nr), + data->fan_min[nr]); + up(&data->update_lock); + + return count; +} + +#define set_fan(offset) \ +static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ + size_t count) \ +{ \ + set_fan_min(dev, buf, offset-1); \ + return count; \ +} \ +static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \ + size_t count) \ +{ \ + return set_fan_div(dev, buf, count, offset-1); \ +} \ +static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ + show_fan##offset##_min, set_fan##offset##_min); \ +static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ + show_fan##offset##_div, set_fan##offset##_div); +set_fan(1); +set_fan(2); + +static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", data->alarms); +} +static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); + +static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); +} +static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); + +static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", data->vrm); +} +static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + data->vrm = simple_strtoul(buf, NULL, 10); + return count; +} +static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); + +static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct lm87_data *data = lm87_update_device(dev); + return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); +} +static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + long val = simple_strtol(buf, NULL, 10); + + down(&data->update_lock); + data->aout = AOUT_TO_REG(val); + lm87_write_value(client, LM87_REG_AOUT, data->aout); + up(&data->update_lock); + return count; +} +static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); + +/* + * Real code + */ + +static int lm87_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_detect(adapter, &addr_data, lm87_detect); +} + +/* + * The following function does more than just detection. If detection + * succeeds, it also registers the new chip. + */ +static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) +{ + struct i2c_client *new_client; + struct lm87_data *data; + int err = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + goto exit; + + if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct lm87_data)); + + /* The common I2C client data is placed right before the + LM87-specific data. */ + new_client = &data->client; + i2c_set_clientdata(new_client, data); + new_client->addr = address; + new_client->adapter = adapter; + new_client->driver = &lm87_driver; + new_client->flags = 0; + + /* Default to an LM87 if forced */ + if (kind == 0) + kind = lm87; + + /* Now, we do the remaining detection. */ + if (kind < 0) { + u8 rev = lm87_read_value(new_client, LM87_REG_REVISION); + + if (rev < 0x01 || rev > 0x08 + || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80) + || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) { + dev_dbg(&adapter->dev, + "LM87 detection failed at 0x%02x.\n", + address); + goto exit_free; + } + } + + /* We can fill in the remaining client fields */ + strlcpy(new_client->name, "lm87", I2C_NAME_SIZE); + data->valid = 0; + init_MUTEX(&data->update_lock); + + /* Tell the I2C layer a new client has arrived */ + if ((err = i2c_attach_client(new_client))) + goto exit_free; + + /* Initialize the LM87 chip */ + lm87_init_client(new_client); + + data->in_scale[0] = 2500; + data->in_scale[1] = 2700; + data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300; + data->in_scale[3] = 5000; + data->in_scale[4] = 12000; + data->in_scale[5] = 2700; + data->in_scale[6] = 1875; + data->in_scale[7] = 1875; + + /* Register sysfs hooks */ + device_create_file(&new_client->dev, &dev_attr_in1_input); + device_create_file(&new_client->dev, &dev_attr_in1_min); + device_create_file(&new_client->dev, &dev_attr_in1_max); + device_create_file(&new_client->dev, &dev_attr_in2_input); + device_create_file(&new_client->dev, &dev_attr_in2_min); + device_create_file(&new_client->dev, &dev_attr_in2_max); + device_create_file(&new_client->dev, &dev_attr_in3_input); + device_create_file(&new_client->dev, &dev_attr_in3_min); + device_create_file(&new_client->dev, &dev_attr_in3_max); + device_create_file(&new_client->dev, &dev_attr_in4_input); + device_create_file(&new_client->dev, &dev_attr_in4_min); + device_create_file(&new_client->dev, &dev_attr_in4_max); + + if (data->channel & CHAN_NO_FAN(0)) { + device_create_file(&new_client->dev, &dev_attr_in6_input); + device_create_file(&new_client->dev, &dev_attr_in6_min); + device_create_file(&new_client->dev, &dev_attr_in6_max); + } else { + device_create_file(&new_client->dev, &dev_attr_fan1_input); + device_create_file(&new_client->dev, &dev_attr_fan1_min); + device_create_file(&new_client->dev, &dev_attr_fan1_div); + } + if (data->channel & CHAN_NO_FAN(1)) { + device_create_file(&new_client->dev, &dev_attr_in7_input); + device_create_file(&new_client->dev, &dev_attr_in7_min); + device_create_file(&new_client->dev, &dev_attr_in7_max); + } else { + device_create_file(&new_client->dev, &dev_attr_fan2_input); + device_create_file(&new_client->dev, &dev_attr_fan2_min); + device_create_file(&new_client->dev, &dev_attr_fan2_div); + } + + device_create_file(&new_client->dev, &dev_attr_temp1_input); + device_create_file(&new_client->dev, &dev_attr_temp1_max); + device_create_file(&new_client->dev, &dev_attr_temp1_min); + device_create_file(&new_client->dev, &dev_attr_temp1_crit); + device_create_file(&new_client->dev, &dev_attr_temp2_input); + device_create_file(&new_client->dev, &dev_attr_temp2_max); + device_create_file(&new_client->dev, &dev_attr_temp2_min); + device_create_file(&new_client->dev, &dev_attr_temp2_crit); + + if (data->channel & CHAN_TEMP3) { + device_create_file(&new_client->dev, &dev_attr_temp3_input); + device_create_file(&new_client->dev, &dev_attr_temp3_max); + device_create_file(&new_client->dev, &dev_attr_temp3_min); + device_create_file(&new_client->dev, &dev_attr_temp3_crit); + } else { + device_create_file(&new_client->dev, &dev_attr_in0_input); + device_create_file(&new_client->dev, &dev_attr_in0_min); + device_create_file(&new_client->dev, &dev_attr_in0_max); + device_create_file(&new_client->dev, &dev_attr_in5_input); + device_create_file(&new_client->dev, &dev_attr_in5_min); + device_create_file(&new_client->dev, &dev_attr_in5_max); + } + + if (!(data->channel & CHAN_NO_VID)) { + device_create_file(&new_client->dev, &dev_attr_cpu0_vid); + device_create_file(&new_client->dev, &dev_attr_vrm); + } + + device_create_file(&new_client->dev, &dev_attr_alarms); + device_create_file(&new_client->dev, &dev_attr_aout_output); + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static void lm87_init_client(struct i2c_client *client) +{ + struct lm87_data *data = i2c_get_clientdata(client); + u8 config; + + data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); + data->vrm = i2c_which_vrm(); + + config = lm87_read_value(client, LM87_REG_CONFIG); + if (!(config & 0x01)) { + int i; + + /* Limits are left uninitialized after power-up */ + for (i = 1; i < 6; i++) { + lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00); + lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF); + } + for (i = 0; i < 2; i++) { + lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F); + lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00); + lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00); + lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF); + } + if (data->channel & CHAN_TEMP3) { + lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F); + lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00); + } else { + lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00); + lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF); + } + } + if ((config & 0x81) != 0x01) { + /* Start monitoring */ + lm87_write_value(client, LM87_REG_CONFIG, + (config & 0xF7) | 0x01); + } +} + +static int lm87_detach_client(struct i2c_client *client) +{ + int err; + + if ((err = i2c_detach_client(client))) { + dev_err(&client->dev, "Client deregistration failed, " + "client not detached.\n"); + return err; + } + + kfree(i2c_get_clientdata(client)); + return 0; +} + +static struct lm87_data *lm87_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct lm87_data *data = i2c_get_clientdata(client); + + down(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i, j; + + dev_dbg(&client->dev, "Updating data.\n"); + + i = (data->channel & CHAN_TEMP3) ? 1 : 0; + j = (data->channel & CHAN_TEMP3) ? 5 : 6; + for (; i < j; i++) { + data->in[i] = lm87_read_value(client, + LM87_REG_IN(i)); + data->in_min[i] = lm87_read_value(client, + LM87_REG_IN_MIN(i)); + data->in_max[i] = lm87_read_value(client, + LM87_REG_IN_MAX(i)); + } + + for (i = 0; i < 2; i++) { + if (data->channel & CHAN_NO_FAN(i)) { + data->in[6+i] = lm87_read_value(client, + LM87_REG_AIN(i)); + data->in_max[6+i] = lm87_read_value(client, + LM87_REG_AIN_MAX(i)); + data->in_min[6+i] = lm87_read_value(client, + LM87_REG_AIN_MIN(i)); + + } else { + data->fan[i] = lm87_read_value(client, + LM87_REG_FAN(i)); + data->fan_min[i] = lm87_read_value(client, + LM87_REG_FAN_MIN(i)); + } + } + + j = (data->channel & CHAN_TEMP3) ? 3 : 2; + for (i = 0 ; i < j; i++) { + data->temp[i] = lm87_read_value(client, + LM87_REG_TEMP[i]); + data->temp_high[i] = lm87_read_value(client, + LM87_REG_TEMP_HIGH[i]); + data->temp_low[i] = lm87_read_value(client, + LM87_REG_TEMP_LOW[i]); + } + + i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK); + j = lm87_read_value(client, LM87_REG_TEMP_HW_INT); + data->temp_crit_int = min(i, j); + + i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK); + j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT); + data->temp_crit_ext = min(i, j); + + i = lm87_read_value(client, LM87_REG_VID_FAN_DIV); + data->fan_div[0] = (i >> 4) & 0x03; + data->fan_div[1] = (i >> 6) & 0x03; + data->vid = (i & 0x0F) + | (lm87_read_value(client, LM87_REG_VID4) & 0x01) + << 4; + + data->alarms = lm87_read_value(client, LM87_REG_ALARMS1) + | (lm87_read_value(client, LM87_REG_ALARMS2) + << 8); + data->aout = lm87_read_value(client, LM87_REG_AOUT); + + data->last_updated = jiffies; + data->valid = 1; + } + + up(&data->update_lock); + + return data; +} + +static int __init sensors_lm87_init(void) +{ + return i2c_add_driver(&lm87_driver); +} + +static void __exit sensors_lm87_exit(void) +{ + i2c_del_driver(&lm87_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others"); +MODULE_DESCRIPTION("LM87 driver"); +MODULE_LICENSE("GPL"); + +module_init(sensors_lm87_init); +module_exit(sensors_lm87_exit); |