diff options
Diffstat (limited to 'drivers/hwmon/pmbus_core.c')
| -rw-r--r-- | drivers/hwmon/pmbus_core.c | 1658 |
1 files changed, 1658 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c new file mode 100644 index 0000000..6474512 --- /dev/null +++ b/drivers/hwmon/pmbus_core.c @@ -0,0 +1,1658 @@ +/* + * Hardware monitoring driver for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/delay.h> +#include <linux/i2c/pmbus.h> +#include "pmbus.h" + +/* + * Constants needed to determine number of sensors, booleans, and labels. + */ +#define PMBUS_MAX_INPUT_SENSORS 11 /* 6*volt, 3*curr, 2*power */ +#define PMBUS_VOUT_SENSORS_PER_PAGE 5 /* input, min, max, lcrit, + crit */ +#define PMBUS_IOUT_SENSORS_PER_PAGE 4 /* input, min, max, crit */ +#define PMBUS_POUT_SENSORS_PER_PAGE 4 /* input, cap, max, crit */ +#define PMBUS_MAX_SENSORS_PER_FAN 1 /* input */ +#define PMBUS_MAX_SENSORS_PER_TEMP 5 /* input, min, max, lcrit, + crit */ + +#define PMBUS_MAX_INPUT_BOOLEANS 7 /* v: min_alarm, max_alarm, + lcrit_alarm, crit_alarm; + c: alarm, crit_alarm; + p: crit_alarm */ +#define PMBUS_VOUT_BOOLEANS_PER_PAGE 4 /* min_alarm, max_alarm, + lcrit_alarm, crit_alarm */ +#define PMBUS_IOUT_BOOLEANS_PER_PAGE 3 /* alarm, lcrit_alarm, + crit_alarm */ +#define PMBUS_POUT_BOOLEANS_PER_PAGE 2 /* alarm, crit_alarm */ +#define PMBUS_MAX_BOOLEANS_PER_FAN 2 /* alarm, fault */ +#define PMBUS_MAX_BOOLEANS_PER_TEMP 4 /* min_alarm, max_alarm, + lcrit_alarm, crit_alarm */ + +#define PMBUS_MAX_INPUT_LABELS 4 /* vin, vcap, iin, pin */ + +/* + * status, status_vout, status_iout, status_fans, status_fan34, and status_temp + * are paged. status_input is unpaged. + */ +#define PB_NUM_STATUS_REG (PMBUS_PAGES * 6 + 1) + +/* + * Index into status register array, per status register group + */ +#define PB_STATUS_BASE 0 +#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) +#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) +#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) +#define PB_STATUS_TEMP_BASE (PB_STATUS_INPUT_BASE + 1) + +struct pmbus_sensor { + char name[I2C_NAME_SIZE]; /* sysfs sensor name */ + struct sensor_device_attribute attribute; + u8 page; /* page number */ + u8 reg; /* register */ + enum pmbus_sensor_classes class; /* sensor class */ + bool update; /* runtime sensor update needed */ + int data; /* Sensor data. + Negative if there was a read error */ +}; + +struct pmbus_boolean { + char name[I2C_NAME_SIZE]; /* sysfs boolean name */ + struct sensor_device_attribute attribute; +}; + +struct pmbus_label { + char name[I2C_NAME_SIZE]; /* sysfs label name */ + struct sensor_device_attribute attribute; + char label[I2C_NAME_SIZE]; /* label */ +}; + +struct pmbus_data { + struct device *hwmon_dev; + + u32 flags; /* from platform data */ + + int exponent; /* linear mode: exponent for output voltages */ + + const struct pmbus_driver_info *info; + + int max_attributes; + int num_attributes; + struct attribute **attributes; + struct attribute_group group; + + /* + * Sensors cover both sensor and limit registers. + */ + int max_sensors; + int num_sensors; + struct pmbus_sensor *sensors; + /* + * Booleans are used for alarms. + * Values are determined from status registers. + */ + int max_booleans; + int num_booleans; + struct pmbus_boolean *booleans; + /* + * Labels are used to map generic names (e.g., "in1") + * to PMBus specific names (e.g., "vin" or "vout1"). + */ + int max_labels; + int num_labels; + struct pmbus_label *labels; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* + * A single status register covers multiple attributes, + * so we keep them all together. + */ + u8 status_bits; + u8 status[PB_NUM_STATUS_REG]; + + u8 currpage; +}; + +int pmbus_set_page(struct i2c_client *client, u8 page) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int rv = 0; + int newpage; + + if (page != data->currpage) { + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); + if (newpage != page) + rv = -EINVAL; + else + data->currpage = page; + } + return rv; +} +EXPORT_SYMBOL_GPL(pmbus_set_page); + +static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_write_byte(client, value); +} + +static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, + u16 word) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_write_word_data(client, reg, word); +} + +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_read_word_data(client, reg); +} +EXPORT_SYMBOL_GPL(pmbus_read_word_data); + +static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_read_byte_data(client, reg); +} + +static void pmbus_clear_fault_page(struct i2c_client *client, int page) +{ + pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); +} + +void pmbus_clear_faults(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < data->info->pages; i++) + pmbus_clear_fault_page(client, i); +} +EXPORT_SYMBOL_GPL(pmbus_clear_faults); + +static int pmbus_check_status_cml(struct i2c_client *client, int page) +{ + int status, status2; + + status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE); + if (status < 0 || (status & PB_STATUS_CML)) { + status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML); + if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) + return -EINVAL; + } + return 0; +} + +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + rv = pmbus_read_byte_data(client, page, reg); + if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) + rv = pmbus_check_status_cml(client, page); + pmbus_clear_fault_page(client, page); + return rv >= 0; +} +EXPORT_SYMBOL_GPL(pmbus_check_byte_register); + +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + rv = pmbus_read_word_data(client, page, reg); + if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) + rv = pmbus_check_status_cml(client, page); + pmbus_clear_fault_page(client, page); + return rv >= 0; +} +EXPORT_SYMBOL_GPL(pmbus_check_word_register); + +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + + return data->info; +} +EXPORT_SYMBOL_GPL(pmbus_get_driver_info); + +static int pmbus_get_status(struct i2c_client *client, int page, int reg) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->get_status) { + status = info->get_status(client, page, reg); + if (status != -ENODATA) + return status; + } + return pmbus_read_byte_data(client, page, reg); +} + +static struct pmbus_data *pmbus_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + + mutex_lock(&data->update_lock); + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i; + + for (i = 0; i < info->pages; i++) + data->status[PB_STATUS_BASE + i] + = pmbus_read_byte_data(client, i, + PMBUS_STATUS_BYTE); + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT)) + continue; + data->status[PB_STATUS_VOUT_BASE + i] + = pmbus_get_status(client, i, PMBUS_STATUS_VOUT); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT)) + continue; + data->status[PB_STATUS_IOUT_BASE + i] + = pmbus_get_status(client, i, PMBUS_STATUS_IOUT); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP)) + continue; + data->status[PB_STATUS_TEMP_BASE + i] + = pmbus_get_status(client, i, + PMBUS_STATUS_TEMPERATURE); + } + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12)) + continue; + data->status[PB_STATUS_FAN_BASE + i] + = pmbus_get_status(client, i, PMBUS_STATUS_FAN_12); + } + + for (i = 0; i < info->pages; i++) { + if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34)) + continue; + data->status[PB_STATUS_FAN34_BASE + i] + = pmbus_get_status(client, i, PMBUS_STATUS_FAN_34); + } + + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + data->status[PB_STATUS_INPUT_BASE] + = pmbus_get_status(client, 0, PMBUS_STATUS_INPUT); + + for (i = 0; i < data->num_sensors; i++) { + struct pmbus_sensor *sensor = &data->sensors[i]; + + if (!data->valid || sensor->update) + sensor->data + = pmbus_read_word_data(client, sensor->page, + sensor->reg); + } + pmbus_clear_faults(client); + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Convert linear sensor values to milli- or micro-units + * depending on sensor type. + */ +static int pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + s16 exponent; + s32 mantissa; + long val; + + if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */ + exponent = data->exponent; + mantissa = (u16) sensor->data; + } else { /* LINEAR11 */ + exponent = (sensor->data >> 11) & 0x001f; + mantissa = sensor->data & 0x07ff; + + if (exponent > 0x0f) + exponent |= 0xffe0; /* sign extend exponent */ + if (mantissa > 0x03ff) + mantissa |= 0xfffff800; /* sign extend mantissa */ + } + + val = mantissa; + + /* scale result to milli-units for all sensors except fans */ + if (sensor->class != PSC_FAN) + val = val * 1000L; + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return (int)val; +} + +/* + * Convert direct sensor values to milli- or micro-units + * depending on sensor type. + */ +static int pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = (s16) sensor->data; + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + if (m == 0) + return 0; + + /* X = 1/m * (Y * 10^-R - b) */ + R = -R; + /* scale result to milli-units for everything but fans */ + if (sensor->class != PSC_FAN) { + R += 3; + b *= 1000; + } + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) { + R += 3; + b *= 1000; + } + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return (int)((val - b) / m); +} + +static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +{ + int val; + + if (data->info->direct[sensor->class]) + val = pmbus_reg2data_direct(data, sensor); + else + val = pmbus_reg2data_linear(data, sensor); + + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 pmbus_data2reg_linear(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + if (class == PSC_VOLTAGE_OUT) { + /* LINEAR16 does not support negative voltages */ + if (val < 0) + return 0; + + /* + * For a static exponents, we don't have a choice + * but to adjust the value to it. + */ + if (data->exponent < 0) + val <<= -data->exponent; + else + val >>= data->exponent; + val = DIV_ROUND_CLOSEST(val, 1000); + return val & 0xffff; + } + + if (val < 0) { + negative = true; + val = -val; + } + + /* Power is in uW. Convert to mW before converting. */ + if (class == PSC_POWER) + val = DIV_ROUND_CLOSEST(val, 1000L); + + /* + * For simplicity, convert fan data to milli-units + * before calculating the exponent. + */ + if (class == PSC_FAN) + val = val * 1000; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + +static u16 pmbus_data2reg_direct(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + long m, b, R; + + m = data->info->m[class]; + b = data->info->b[class]; + R = data->info->R[class]; + + /* Power is in uW. Adjust R and b. */ + if (class == PSC_POWER) { + R -= 3; + b *= 1000; + } + + /* Calculate Y = (m * X + b) * 10^R */ + if (class != PSC_FAN) { + R -= 3; /* Adjust R and b for data in milli-units */ + b *= 1000; + } + val = val * m + b; + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return val; +} + +static u16 pmbus_data2reg(struct pmbus_data *data, + enum pmbus_sensor_classes class, long val) +{ + u16 regval; + + if (data->info->direct[class]) + regval = pmbus_data2reg_direct(data, class, val); + else + regval = pmbus_data2reg_linear(data, class, val); + + return regval; +} + +/* + * Return boolean calculated from converted data. + * <index> defines a status register index and mask, and optionally + * two sensor indexes. + * The upper half-word references the two sensors, + * two sensor indices. + * The upper half-word references the two optional sensors, + * the lower half word references status register and mask. + * The function returns true if (status[reg] & mask) is true and, + * if specified, if v1 >= v2. + * To determine if an object exceeds upper limits, specify <v, limit>. + * To determine if an object exceeds lower limits, specify <limit, v>. + * + * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of + * index are set. s1 and s2 (the sensor index values) are zero in this case. + * The function returns true if (status[reg] & mask) is true. + * + * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against + * a specified limit has to be performed to determine the boolean result. + * In this case, the function returns true if v1 >= v2 (where v1 and v2 are + * sensor values referenced by sensor indices s1 and s2). + * + * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>. + * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>. + * + * If a negative value is stored in any of the referenced registers, this value + * reflects an error code which will be returned. + */ +static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val) +{ + u8 s1 = (index >> 24) & 0xff; + u8 s2 = (index >> 16) & 0xff; + u8 reg = (index >> 8) & 0xff; + u8 mask = index & 0xff; + int status; + u8 regval; + + status = data->status[reg]; + if (status < 0) + return status; + + regval = status & mask; + if (!s1 && !s2) + *val = !!regval; + else { + int v1, v2; + struct pmbus_sensor *sensor1, *sensor2; + + sensor1 = &data->sensors[s1]; + if (sensor1->data < 0) + return sensor1->data; + sensor2 = &data->sensors[s2]; + if (sensor2->data < 0) + return sensor2->data; + + v1 = pmbus_reg2data(data, sensor1); + v2 = pmbus_reg2data(data, sensor2); + *val = !!(regval && v1 >= v2); + } + return 0; +} + +static ssize_t pmbus_show_boolean(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_data *data = pmbus_update_device(dev); + int val; + int err; + + err = pmbus_get_boolean(data, attr->index, &val); + if (err) + return err; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t pmbus_show_sensor(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_data *data = pmbus_update_device(dev); + struct pmbus_sensor *sensor; + + sensor = &data->sensors[attr->index]; + if (sensor->data < 0) + return sensor->data; + + return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor)); +} + +static ssize_t pmbus_set_sensor(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + struct pmbus_sensor *sensor = &data->sensors[attr->index]; + ssize_t rv = count; + long val = 0; + int ret; + u16 regval; + + if (strict_strtol(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + regval = pmbus_data2reg(data, sensor->class, val); + ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval); + if (ret < 0) + rv = ret; + else + data->sensors[attr->index].data = regval; + mutex_unlock(&data->update_lock); + return rv; +} + +static ssize_t pmbus_show_label(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct pmbus_data *data = i2c_get_clientdata(client); + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + + return snprintf(buf, PAGE_SIZE, "%s\n", + data->labels[attr->index].label); +} + +#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set) \ +do { \ + struct sensor_device_attribute *a \ + = &data->_type##s[data->num_##_type##s].attribute; \ + BUG_ON(data->num_attributes >= data->max_attributes); \ + a->dev_attr.attr.name = _name; \ + a->dev_attr.attr.mode = _mode; \ + a->dev_attr.show = _show; \ + a->dev_attr.store = _set; \ + a->index = _idx; \ + data->attributes[data->num_attributes] = &a->dev_attr.attr; \ + data->num_attributes++; \ +} while (0) + +#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx) \ + PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type, \ + pmbus_show_##_type, NULL) + +#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx) \ + PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type, \ + pmbus_show_##_type, pmbus_set_##_type) + +static void pmbus_add_boolean(struct pmbus_data *data, + const char *name, const char *type, int seq, + int idx) +{ + struct pmbus_boolean *boolean; + + BUG_ON(data->num_booleans >= data->max_booleans); + + boolean = &data->booleans[data->num_booleans]; + + snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s", + name, seq, type); + PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx); + data->num_booleans++; +} + +static void pmbus_add_boolean_reg(struct pmbus_data *data, + const char *name, const char *type, + int seq, int reg, int bit) +{ + pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit); +} + +static void pmbus_add_boolean_cmp(struct pmbus_data *data, + const char *name, const char *type, + int seq, int i1, int i2, int reg, int mask) +{ + pmbus_add_boolean(data, name, type, seq, + (i1 << 24) | (i2 << 16) | (reg << 8) | mask); +} + +static void pmbus_add_sensor(struct pmbus_data *data, + const char *name, const char *type, int seq, + int page, int reg, enum pmbus_sensor_classes class, + bool update) +{ + struct pmbus_sensor *sensor; + + BUG_ON(data->num_sensors >= data->max_sensors); + + sensor = &data->sensors[data->num_sensors]; + snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", + name, seq, type); + sensor->page = page; + sensor->reg = reg; + sensor->class = class; + sensor->update = update; + if (update) + PMBUS_ADD_GET_ATTR(data, sensor->name, sensor, + data->num_sensors); + else + PMBUS_ADD_SET_ATTR(data, sensor->name, sensor, + data->num_sensors); + data->num_sensors++; +} + +static void pmbus_add_label(struct pmbus_data *data, + const char *name, int seq, + const char *lstring, int index) +{ + struct pmbus_label *label; + + BUG_ON(data->num_labels >= data->max_labels); + + label = &data->labels[data->num_labels]; + snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq); + if (!index) + strncpy(label->label, lstring, sizeof(label->label) - 1); + else + snprintf(label->label, sizeof(label->label), "%s%d", lstring, + index); + + PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels); + data->num_labels++; +} + +static const int pmbus_temp_registers[] = { + PMBUS_READ_TEMPERATURE_1, + PMBUS_READ_TEMPERATURE_2, + PMBUS_READ_TEMPERATURE_3 +}; + +static const int pmbus_temp_flags[] = { + PMBUS_HAVE_TEMP, + PMBUS_HAVE_TEMP2, + PMBUS_HAVE_TEMP3 +}; + +static const int pmbus_fan_registers[] = { + PMBUS_READ_FAN_SPEED_1, + PMBUS_READ_FAN_SPEED_2, + PMBUS_READ_FAN_SPEED_3, + PMBUS_READ_FAN_SPEED_4 +}; + +static const int pmbus_fan_config_registers[] = { + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_34, + PMBUS_FAN_CONFIG_34 +}; + +static const int pmbus_fan_status_registers[] = { + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_34, + PMBUS_STATUS_FAN_34 +}; + +static const u32 pmbus_fan_flags[] = { + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN34, + PMBUS_HAVE_FAN34 +}; + +static const u32 pmbus_fan_status_flags[] = { + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN34, + PMBUS_HAVE_STATUS_FAN34 +}; + +/* + * Determine maximum number of sensors, booleans, and labels. + * To keep things simple, only make a rough high estimate. + */ +static void pmbus_find_max_attr(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int page, max_sensors, max_booleans, max_labels; + + max_sensors = PMBUS_MAX_INPUT_SENSORS; + max_booleans = PMBUS_MAX_INPUT_BOOLEANS; + max_labels = PMBUS_MAX_INPUT_LABELS; + + for (page = 0; page < info->pages; page++) { + if (info->func[page] & PMBUS_HAVE_VOUT) { + max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_IOUT) { + max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_POUT) { + max_sensors += PMBUS_POUT_SENSORS_PER_PAGE; + max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE; + max_labels++; + } + if (info->func[page] & PMBUS_HAVE_FAN12) { + max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; + max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; + } + if (info->func[page] & PMBUS_HAVE_FAN34) { + max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN; + max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN; + } + if (info->func[page] & PMBUS_HAVE_TEMP) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + if (info->func[page] & PMBUS_HAVE_TEMP2) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + if (info->func[page] & PMBUS_HAVE_TEMP3) { + max_sensors += PMBUS_MAX_SENSORS_PER_TEMP; + max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP; + } + } + data->max_sensors = max_sensors; + data->max_booleans = max_booleans; + data->max_labels = max_labels; + data->max_attributes = max_sensors + max_booleans + max_labels; +} + +/* + * Search for attributes. Allocate sensors, booleans, and labels as needed. + */ +static void pmbus_find_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int page, i0, i1, in_index; + + /* + * Input voltage sensors + */ + in_index = 1; + if (info->func[0] & PMBUS_HAVE_VIN) { + bool have_alarm = false; + + i0 = data->num_sensors; + pmbus_add_label(data, "in", in_index, "vin", 0); + pmbus_add_sensor(data, "in", "input", in_index, + 0, PMBUS_READ_VIN, PSC_VOLTAGE_IN, true); + if (pmbus_check_word_register(client, 0, + PMBUS_VIN_UV_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "min", in_index, + 0, PMBUS_VIN_UV_WARN_LIMIT, + PSC_VOLTAGE_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) { + pmbus_add_boolean_reg(data, "in", "min_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_VOLTAGE_UV_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, 0, + PMBUS_VIN_UV_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "lcrit", in_index, + 0, PMBUS_VIN_UV_FAULT_LIMIT, + PSC_VOLTAGE_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) { + pmbus_add_boolean_reg(data, "in", "lcrit_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_VOLTAGE_UV_FAULT); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, 0, + PMBUS_VIN_OV_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "max", in_index, + 0, PMBUS_VIN_OV_WARN_LIMIT, + PSC_VOLTAGE_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) { + pmbus_add_boolean_reg(data, "in", "max_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_VOLTAGE_OV_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, 0, + PMBUS_VIN_OV_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "crit", in_index, + 0, PMBUS_VIN_OV_FAULT_LIMIT, + PSC_VOLTAGE_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) { + pmbus_add_boolean_reg(data, "in", "crit_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_VOLTAGE_OV_FAULT); + have_alarm = true; + } + } + /* + * Add generic alarm attribute only if there are no individual + * attributes. + */ + if (!have_alarm) + pmbus_add_boolean_reg(data, "in", "alarm", + in_index, + PB_STATUS_BASE, + PB_STATUS_VIN_UV); + in_index++; + } + if (info->func[0] & PMBUS_HAVE_VCAP) { + pmbus_add_label(data, "in", in_index, "vcap", 0); + pmbus_add_sensor(data, "in", "input", in_index, 0, + PMBUS_READ_VCAP, PSC_VOLTAGE_IN, true); + in_index++; + } + + /* + * Output voltage sensors + */ + for (page = 0; page < info->pages; page++) { + bool have_alarm = false; + + if (!(info->func[page] & PMBUS_HAVE_VOUT)) + continue; + + i0 = data->num_sensors; + pmbus_add_label(data, "in", in_index, "vout", page + 1); + pmbus_add_sensor(data, "in", "input", in_index, page, + PMBUS_READ_VOUT, PSC_VOLTAGE_OUT, true); + if (pmbus_check_word_register(client, page, + PMBUS_VOUT_UV_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "min", in_index, page, + PMBUS_VOUT_UV_WARN_LIMIT, + PSC_VOLTAGE_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) { + pmbus_add_boolean_reg(data, "in", "min_alarm", + in_index, + PB_STATUS_VOUT_BASE + + page, + PB_VOLTAGE_UV_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_VOUT_UV_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "lcrit", in_index, page, + PMBUS_VOUT_UV_FAULT_LIMIT, + PSC_VOLTAGE_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) { + pmbus_add_boolean_reg(data, "in", "lcrit_alarm", + in_index, + PB_STATUS_VOUT_BASE + + page, + PB_VOLTAGE_UV_FAULT); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_VOUT_OV_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "max", in_index, page, + PMBUS_VOUT_OV_WARN_LIMIT, + PSC_VOLTAGE_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) { + pmbus_add_boolean_reg(data, "in", "max_alarm", + in_index, + PB_STATUS_VOUT_BASE + + page, + PB_VOLTAGE_OV_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_VOUT_OV_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "in", "crit", in_index, page, + PMBUS_VOUT_OV_FAULT_LIMIT, + PSC_VOLTAGE_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) { + pmbus_add_boolean_reg(data, "in", "crit_alarm", + in_index, + PB_STATUS_VOUT_BASE + + page, + PB_VOLTAGE_OV_FAULT); + have_alarm = true; + } + } + /* + * Add generic alarm attribute only if there are no individual + * attributes. + */ + if (!have_alarm) + pmbus_add_boolean_reg(data, "in", "alarm", + in_index, + PB_STATUS_BASE + page, + PB_STATUS_VOUT_OV); + in_index++; + } + + /* + * Current sensors + */ + + /* + * Input current sensors + */ + in_index = 1; + if (info->func[0] & PMBUS_HAVE_IIN) { + i0 = data->num_sensors; + pmbus_add_label(data, "curr", in_index, "iin", 0); + pmbus_add_sensor(data, "curr", "input", in_index, + 0, PMBUS_READ_IIN, PSC_CURRENT_IN, true); + if (pmbus_check_word_register(client, 0, + PMBUS_IIN_OC_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "curr", "max", in_index, + 0, PMBUS_IIN_OC_WARN_LIMIT, + PSC_CURRENT_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) { + pmbus_add_boolean_reg(data, "curr", "max_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_IIN_OC_WARNING); + } + } + if (pmbus_check_word_register(client, 0, + PMBUS_IIN_OC_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "curr", "crit", in_index, + 0, PMBUS_IIN_OC_FAULT_LIMIT, + PSC_CURRENT_IN, false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + pmbus_add_boolean_reg(data, "curr", + "crit_alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_IIN_OC_FAULT); + } + in_index++; + } + + /* + * Output current sensors + */ + for (page = 0; page < info->pages; page++) { + bool have_alarm = false; + + if (!(info->func[page] & PMBUS_HAVE_IOUT)) + continue; + + i0 = data->num_sensors; + pmbus_add_label(data, "curr", in_index, "iout", page + 1); + pmbus_add_sensor(data, "curr", "input", in_index, page, + PMBUS_READ_IOUT, PSC_CURRENT_OUT, true); + if (pmbus_check_word_register(client, page, + PMBUS_IOUT_OC_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "curr", "max", in_index, page, + PMBUS_IOUT_OC_WARN_LIMIT, + PSC_CURRENT_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) { + pmbus_add_boolean_reg(data, "curr", "max_alarm", + in_index, + PB_STATUS_IOUT_BASE + + page, PB_IOUT_OC_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_IOUT_UC_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "curr", "lcrit", in_index, page, + PMBUS_IOUT_UC_FAULT_LIMIT, + PSC_CURRENT_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) { + pmbus_add_boolean_reg(data, "curr", + "lcrit_alarm", + in_index, + PB_STATUS_IOUT_BASE + + page, PB_IOUT_UC_FAULT); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_IOUT_OC_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "curr", "crit", in_index, page, + PMBUS_IOUT_OC_FAULT_LIMIT, + PSC_CURRENT_OUT, false); + if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) { + pmbus_add_boolean_reg(data, "curr", + "crit_alarm", + in_index, + PB_STATUS_IOUT_BASE + + page, PB_IOUT_OC_FAULT); + have_alarm = true; + } + } + /* + * Add generic alarm attribute only if there are no individual + * attributes. + */ + if (!have_alarm) + pmbus_add_boolean_reg(data, "curr", "alarm", + in_index, + PB_STATUS_BASE + page, + PB_STATUS_IOUT_OC); + in_index++; + } + + /* + * Power sensors + */ + /* + * Input Power sensors + */ + in_index = 1; + if (info->func[0] & PMBUS_HAVE_PIN) { + i0 = data->num_sensors; + pmbus_add_label(data, "power", in_index, "pin", 0); + pmbus_add_sensor(data, "power", "input", in_index, + 0, PMBUS_READ_PIN, PSC_POWER, true); + if (pmbus_check_word_register(client, 0, + PMBUS_PIN_OP_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "power", "max", in_index, + 0, PMBUS_PIN_OP_WARN_LIMIT, PSC_POWER, + false); + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + pmbus_add_boolean_reg(data, "power", + "alarm", + in_index, + PB_STATUS_INPUT_BASE, + PB_PIN_OP_WARNING); + } + in_index++; + } + + /* + * Output Power sensors + */ + for (page = 0; page < info->pages; page++) { + bool need_alarm = false; + + if (!(info->func[page] & PMBUS_HAVE_POUT)) + continue; + + i0 = data->num_sensors; + pmbus_add_label(data, "power", in_index, "pout", page + 1); + pmbus_add_sensor(data, "power", "input", in_index, page, + PMBUS_READ_POUT, PSC_POWER, true); + /* + * Per hwmon sysfs API, power_cap is to be used to limit output + * power. + * We have two registers related to maximum output power, + * PMBUS_POUT_MAX and PMBUS_POUT_OP_WARN_LIMIT. + * PMBUS_POUT_MAX matches the powerX_cap attribute definition. + * There is no attribute in the API to match + * PMBUS_POUT_OP_WARN_LIMIT. We use powerX_max for now. + */ + if (pmbus_check_word_register(client, page, PMBUS_POUT_MAX)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "power", "cap", in_index, page, + PMBUS_POUT_MAX, PSC_POWER, false); + need_alarm = true; + } + if (pmbus_check_word_register(client, page, + PMBUS_POUT_OP_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "power", "max", in_index, page, + PMBUS_POUT_OP_WARN_LIMIT, PSC_POWER, + false); + need_alarm = true; + } + if (need_alarm && (info->func[page] & PMBUS_HAVE_STATUS_IOUT)) + pmbus_add_boolean_reg(data, "power", "alarm", + in_index, + PB_STATUS_IOUT_BASE + page, + PB_POUT_OP_WARNING + | PB_POWER_LIMITING); + + if (pmbus_check_word_register(client, page, + PMBUS_POUT_OP_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "power", "crit", in_index, page, + PMBUS_POUT_OP_FAULT_LIMIT, PSC_POWER, + false); + if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) + pmbus_add_boolean_reg(data, "power", + "crit_alarm", + in_index, + PB_STATUS_IOUT_BASE + + page, + PB_POUT_OP_FAULT); + } + in_index++; + } + + /* + * Temperature sensors + */ + in_index = 1; + for (page = 0; page < info->pages; page++) { + int t; + + for (t = 0; t < ARRAY_SIZE(pmbus_temp_registers); t++) { + bool have_alarm = false; + + /* + * A PMBus chip may support any combination of + * temperature registers on any page. So we can not + * abort after a failure to detect a register, but have + * to continue checking for all registers on all pages. + */ + if (!(info->func[page] & pmbus_temp_flags[t])) + continue; + + if (!pmbus_check_word_register + (client, page, pmbus_temp_registers[t])) + continue; + + i0 = data->num_sensors; + pmbus_add_sensor(data, "temp", "input", in_index, page, + pmbus_temp_registers[t], + PSC_TEMPERATURE, true); + + /* + * PMBus provides only one status register for TEMP1-3. + * Thus, we can not use the status register to determine + * which of the three sensors actually caused an alarm. + * Always compare current temperature against the limit + * registers to determine alarm conditions for a + * specific sensor. + * + * Since there is only one set of limit registers for + * up to three temperature sensors, we need to update + * all limit registers after the limit was changed for + * one of the sensors. This ensures that correct limits + * are reported for all temperature sensors. + */ + if (pmbus_check_word_register + (client, page, PMBUS_UT_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "temp", "min", in_index, + page, PMBUS_UT_WARN_LIMIT, + PSC_TEMPERATURE, true); + if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) { + pmbus_add_boolean_cmp(data, "temp", + "min_alarm", in_index, i1, i0, + PB_STATUS_TEMP_BASE + page, + PB_TEMP_UT_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_UT_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "temp", "lcrit", + in_index, page, + PMBUS_UT_FAULT_LIMIT, + PSC_TEMPERATURE, true); + if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) { + pmbus_add_boolean_cmp(data, "temp", + "lcrit_alarm", in_index, i1, i0, + PB_STATUS_TEMP_BASE + page, + PB_TEMP_UT_FAULT); + have_alarm = true; + } + } + if (pmbus_check_word_register + (client, page, PMBUS_OT_WARN_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "temp", "max", in_index, + page, PMBUS_OT_WARN_LIMIT, + PSC_TEMPERATURE, true); + if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) { + pmbus_add_boolean_cmp(data, "temp", + "max_alarm", in_index, i0, i1, + PB_STATUS_TEMP_BASE + page, + PB_TEMP_OT_WARNING); + have_alarm = true; + } + } + if (pmbus_check_word_register(client, page, + PMBUS_OT_FAULT_LIMIT)) { + i1 = data->num_sensors; + pmbus_add_sensor(data, "temp", "crit", in_index, + page, PMBUS_OT_FAULT_LIMIT, + PSC_TEMPERATURE, true); + if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) { + pmbus_add_boolean_cmp(data, "temp", + "crit_alarm", in_index, i0, i1, + PB_STATUS_TEMP_BASE + page, + PB_TEMP_OT_FAULT); + have_alarm = true; + } + } + /* + * Last resort - we were not able to create any alarm + * registers. Report alarm for all sensors using the + * status register temperature alarm bit. + */ + if (!have_alarm) + pmbus_add_boolean_reg(data, "temp", "alarm", + in_index, + PB_STATUS_BASE + page, + PB_STATUS_TEMPERATURE); + in_index++; + } + } + + /* + * Fans + */ + in_index = 1; + for (page = 0; page < info->pages; page++) { + int f; + + for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) { + int regval; + + if (!(info->func[page] & pmbus_fan_flags[f])) + break; + + if (!pmbus_check_word_register(client, page, + pmbus_fan_registers[f]) + || !pmbus_check_byte_register(client, page, + pmbus_fan_config_registers[f])) + break; + + /* + * Skip fan if not installed. + * Each fan configuration register covers multiple fans, + * so we have to do some magic. + */ + regval = pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[f]); + if (regval < 0 || + (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4))))) + continue; + + i0 = data->num_sensors; + pmbus_add_sensor(data, "fan", "input", in_index, page, + pmbus_fan_registers[f], PSC_FAN, true); + + /* + * Each fan status register covers multiple fans, + * so we have to do some magic. + */ + if ((info->func[page] & pmbus_fan_status_flags[f]) && + pmbus_check_byte_register(client, + page, pmbus_fan_status_registers[f])) { + int base; + + if (f > 1) /* fan 3, 4 */ + base = PB_STATUS_FAN34_BASE + page; + else + base = PB_STATUS_FAN_BASE + page; + pmbus_add_boolean_reg(data, "fan", "alarm", + in_index, base, + PB_FAN_FAN1_WARNING >> (f & 1)); + pmbus_add_boolean_reg(data, "fan", "fault", + in_index, base, + PB_FAN_FAN1_FAULT >> (f & 1)); + } + in_index++; + } + } +} + +/* + * Identify chip parameters. + * This function is called for all chips. + */ +static int pmbus_identify_common(struct i2c_client *client, + struct pmbus_data *data) +{ + int vout_mode = -1, exponent; + + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + /* + * Not all chips support the VOUT_MODE command, + * so a failure to read it is not an error. + */ + switch (vout_mode >> 5) { + case 0: /* linear mode */ + if (data->info->direct[PSC_VOLTAGE_OUT]) + return -ENODEV; + + exponent = vout_mode & 0x1f; + /* and sign-extend it */ + if (exponent & 0x10) + exponent |= ~0x1f; + data->exponent = exponent; + break; + case 2: /* direct mode */ + if (!data->info->direct[PSC_VOLTAGE_OUT]) + return -ENODEV; + break; + default: + return -ENODEV; + } + } + + /* Determine maximum number of sensors, booleans, and labels */ + pmbus_find_max_attr(client, data); + pmbus_clear_fault_page(client, 0); + return 0; +} + +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info) +{ + const struct pmbus_platform_data *pdata = client->dev.platform_data; + struct pmbus_data *data; + int ret; + + if (!info) { + dev_err(&client->dev, "Missing chip information"); + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&client->dev, "No memory to allocate driver data\n"); + return -ENOMEM; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* + * Bail out if status register or PMBus revision register + * does not exist. + */ + if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0 + || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) { + dev_err(&client->dev, + "Status or revision register not found\n"); + ret = -ENODEV; + goto out_data; + } + + if (pdata) + data->flags = pdata->flags; + data->info = info; + + pmbus_clear_faults(client); + + if (info->identify) { + ret = (*info->identify)(client, info); + if (ret < 0) { + dev_err(&client->dev, "Chip identification failed\n"); + goto out_data; + } + } + + if (info->pages <= 0 || info->pages > PMBUS_PAGES) { + dev_err(&client->dev, "Bad number of PMBus pages: %d\n", + info->pages); + ret = -EINVAL; + goto out_data; + } + /* + * Bail out if more than one page was configured, but we can not + * select the highest page. This is an indication that the wrong + * chip type was selected. Better bail out now than keep + * returning errors later on. + */ + if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) { + dev_err(&client->dev, "Failed to select page %d\n", + info->pages - 1); + ret = -EINVAL; + goto out_data; + } + + ret = pmbus_identify_common(client, data); + if (ret < 0) { + dev_err(&client->dev, "Failed to identify chip capabilities\n"); + goto out_data; + } + + ret = -ENOMEM; + data->sensors = kzalloc(sizeof(struct pmbus_sensor) * data->max_sensors, + GFP_KERNEL); + if (!data->sensors) { + dev_err(&client->dev, "No memory to allocate sensor data\n"); + goto out_data; + } + + data->booleans = kzalloc(sizeof(struct pmbus_boolean) + * data->max_booleans, GFP_KERNEL); + if (!data->booleans) { + dev_err(&client->dev, "No memory to allocate boolean data\n"); + goto out_sensors; + } + + data->labels = kzalloc(sizeof(struct pmbus_label) * data->max_labels, + GFP_KERNEL); + if (!data->labels) { + dev_err(&client->dev, "No memory to allocate label data\n"); + goto out_booleans; + } + + data->attributes = kzalloc(sizeof(struct attribute *) + * data->max_attributes, GFP_KERNEL); + if (!data->attributes) { + dev_err(&client->dev, "No memory to allocate attribute data\n"); + goto out_labels; + } + + pmbus_find_attributes(client, data); + + /* + * If there are no attributes, something is wrong. + * Bail out instead of trying to register nothing. + */ + if (!data->num_attributes) { + dev_err(&client->dev, "No attributes found\n"); + ret = -ENODEV; + goto out_attributes; + } + + /* Register sysfs hooks */ + data->group.attrs = data->attributes; + ret = sysfs_create_group(&client->dev.kobj, &data->group); + if (ret) { + dev_err(&client->dev, "Failed to create sysfs entries\n"); + goto out_attributes; + } + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + dev_err(&client->dev, "Failed to register hwmon device\n"); + goto out_hwmon_device_register; + } + return 0; + +out_hwmon_device_register: + sysfs_remove_group(&client->dev.kobj, &data->group); +out_attributes: + kfree(data->attributes); +out_labels: + kfree(data->labels); +out_booleans: + kfree(data->booleans); +out_sensors: + kfree(data->sensors); +out_data: + kfree(data); + return ret; +} +EXPORT_SYMBOL_GPL(pmbus_do_probe); + +int pmbus_do_remove(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->group); + kfree(data->attributes); + kfree(data->labels); + kfree(data->booleans); + kfree(data->sensors); + kfree(data); + return 0; +} +EXPORT_SYMBOL_GPL(pmbus_do_remove); + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus core driver"); +MODULE_LICENSE("GPL"); |