aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-cd.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide-cd.c')
-rw-r--r--drivers/ide/ide-cd.c118
1 files changed, 8 insertions, 110 deletions
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 1a7410f..cae6937 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -239,7 +239,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
static void cdrom_end_request(ide_drive_t *drive, int uptodate)
{
- struct request *rq = HWGROUP(drive)->rq;
+ struct request *rq = drive->hwif->rq;
int nsectors = rq->hard_cur_sectors;
ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
@@ -306,8 +306,7 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 st)
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
ide_hwif_t *hwif = drive->hwif;
- ide_hwgroup_t *hwgroup = hwif->hwgroup;
- struct request *rq = hwgroup->rq;
+ struct request *rq = hwif->rq;
int stat, err, sense_key;
/* check for errors */
@@ -502,7 +501,7 @@ end_request:
blkdev_dequeue_request(rq);
spin_unlock_irqrestore(q->queue_lock, flags);
- hwgroup->rq = NULL;
+ hwif->rq = NULL;
cdrom_queue_request_sense(drive, rq->sense, rq);
} else
@@ -511,106 +510,6 @@ end_request:
return 1;
}
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *);
-static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-
-/*
- * Set up the device registers for transferring a packet command on DEV,
- * expecting to later transfer XFERLEN bytes. HANDLER is the routine
- * which actually transfers the command to the drive. If this is a
- * drq_interrupt device, this routine will arrange for HANDLER to be
- * called when the interrupt from the drive arrives. Otherwise, HANDLER
- * will be called immediately after the drive is prepared for the transfer.
- */
-static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->hwgroup->rq;
- int xferlen;
-
- xferlen = ide_cd_get_xferlen(rq);
-
- ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
-
- /* FIXME: for Virtual DMA we must check harder */
- if (drive->dma)
- drive->dma = !hwif->dma_ops->dma_setup(drive);
-
- /* set up the controller registers */
- ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
- xferlen, drive->dma);
-
- if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- /* waiting for CDB interrupt, not DMA yet. */
- if (drive->dma)
- drive->waiting_for_dma = 0;
-
- /* packet command */
- ide_execute_command(drive, ATA_CMD_PACKET,
- cdrom_transfer_packet_command,
- ATAPI_WAIT_PC, ide_cd_expiry);
- return ide_started;
- } else {
- ide_execute_pkt_cmd(drive);
-
- return cdrom_transfer_packet_command(drive);
- }
-}
-
-/*
- * Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device
- * registers must have already been prepared by cdrom_start_packet_command.
- * HANDLER is the interrupt handler to call when the command completes or
- * there's data ready.
- */
-#define ATAPI_MIN_CDB_BYTES 12
-static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->hwgroup->rq;
- int cmd_len;
- ide_startstop_t startstop;
-
- ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
-
- if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- /*
- * Here we should have been called after receiving an interrupt
- * from the device. DRQ should how be set.
- */
-
- /* check for errors */
- if (cdrom_decode_status(drive, ATA_DRQ, NULL))
- return ide_stopped;
-
- /* ok, next interrupt will be DMA interrupt */
- if (drive->dma)
- drive->waiting_for_dma = 1;
- } else {
- /* otherwise, we must wait for DRQ to get set */
- if (ide_wait_stat(&startstop, drive, ATA_DRQ,
- ATA_BUSY, WAIT_READY))
- return startstop;
- }
-
- /* arm the interrupt handler */
- ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, ide_cd_expiry);
-
- /* ATAPI commands get padded out to 12 bytes minimum */
- cmd_len = COMMAND_SIZE(rq->cmd[0]);
- if (cmd_len < ATAPI_MIN_CDB_BYTES)
- cmd_len = ATAPI_MIN_CDB_BYTES;
-
- /* send the command to the device */
- hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
-
- /* start the DMA if need be */
- if (drive->dma)
- hwif->dma_ops->dma_start(drive);
-
- return ide_started;
-}
-
/*
* Check the contents of the interrupt reason register from the cdrom
* and attempt to recover if there are problems. Returns 0 if everything's
@@ -854,8 +753,7 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- ide_hwgroup_t *hwgroup = hwif->hwgroup;
- struct request *rq = hwgroup->rq;
+ struct request *rq = hwif->rq;
xfer_func_t *xferfunc;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, stat, thislen, uptodate = 0;
@@ -1061,7 +959,7 @@ end_request:
if (blk_end_request(rq, 0, dlen))
BUG();
- hwgroup->rq = NULL;
+ hwif->rq = NULL;
} else {
if (!uptodate)
rq->cmd_flags |= REQ_FAILED;
@@ -1183,7 +1081,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
return ide_stopped;
}
- return cdrom_start_packet_command(drive);
+ return ide_issue_pc(drive);
}
/*
@@ -1916,7 +1814,7 @@ static void ide_cd_release(struct kref *kref)
static int ide_cd_probe(ide_drive_t *);
-static ide_driver_t ide_cdrom_driver = {
+static struct ide_driver ide_cdrom_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-cdrom",
@@ -1927,7 +1825,6 @@ static ide_driver_t ide_cdrom_driver = {
.version = IDECD_VERSION,
.do_request = ide_cd_do_request,
.end_request = ide_end_request,
- .error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc_entries = ide_cd_proc_entries,
.proc_devsets = ide_cd_proc_devsets,
@@ -2082,6 +1979,7 @@ static int ide_cd_probe(ide_drive_t *drive)
}
drive->debug_mask = debug_mask;
+ drive->irq_handler = cdrom_newpc_intr;
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {