diff options
Diffstat (limited to 'drivers/media/dvb/frontends/bcm3510.c')
-rw-r--r-- | drivers/media/dvb/frontends/bcm3510.c | 853 |
1 files changed, 853 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c new file mode 100644 index 0000000..f5fdc5c --- /dev/null +++ b/drivers/media/dvb/frontends/bcm3510.c @@ -0,0 +1,853 @@ +/* + * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC) + * + * Copyright (C) 2001-5, B2C2 inc. + * + * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de> + * + * This driver is "hard-coded" to be used with the 1st generation of + * Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming + * (Panasonic CT10S) is located here, which is actually wrong. Unless there is + * another device with a BCM3510, this is no problem. + * + * The driver works also with QAM64 DVB-C, but had an unreasonable high + * UNC. (Tested with the Air2PC ATSC 1st generation) + * + * You'll need a firmware for this driver in order to get it running. It is + * called "dvb-fe-bcm3510-01.fw". + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 675 Mass + * Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/firmware.h> + +#include "dvb_frontend.h" +#include "bcm3510.h" +#include "bcm3510_priv.h" + +struct bcm3510_state { + + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + const struct bcm3510_config* config; + struct dvb_frontend frontend; + + /* demodulator private data */ + struct semaphore hab_sem; + u8 firmware_loaded:1; + + unsigned long next_status_check; + unsigned long status_check_interval; + struct bcm3510_hab_cmd_status1 status1; + struct bcm3510_hab_cmd_status2 status2; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able))."); + +#define dprintk(level,x...) if (level & debug) printk(x) +#define dbufout(b,l,m) {\ + int i; \ + for (i = 0; i < l; i++) \ + m("%02x ",b[i]); \ +} +#define deb_info(args...) dprintk(0x01,args) +#define deb_i2c(args...) dprintk(0x02,args) +#define deb_hab(args...) dprintk(0x04,args) + +/* transfer functions */ +static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + u8 b[256]; + int err; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 }; + + b[0] = reg; + memcpy(&b[1],buf,len); + + deb_i2c("i2c wr %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + + deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + + return 0; +} + +static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len) +{ + struct i2c_msg msg[] = { + { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } + }; + int err; + + memset(buf,0,len); + + if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) { + deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n", + __FUNCTION__, state->config->demod_address, reg, err); + return -EREMOTEIO; + } + deb_i2c("i2c rd %02x: ",reg); + dbufout(buf,len,deb_i2c); + deb_i2c("\n"); + + return 0; +} + +static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v) +{ + return bcm3510_writebytes(state,reg,&v.raw,1); +} + +static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v) +{ + return bcm3510_readbytes(state,reg,&v->raw,1); +} + +/* Host Access Buffer transfers */ +static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v; + int ret,i; + + v.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,v)) < 0) + return ret; + + for (i = 0; i < len; i++) { + if ((ret = bcm3510_readB(st,0xa7,&v)) < 0) + return ret; + buf[i] = v.HABDATA_a7; + } + return 0; +} + +static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len) +{ + bcm3510_register_value v,hab; + int ret,i; + unsigned long t; + +/* Check if any previous HAB request still needs to be serviced by the + * Aquisition Processor before sending new request */ + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + if (v.HABSTAT_a8.HABR) { + deb_info("HAB is running already - clearing it.\n"); + v.HABSTAT_a8.HABR = 0; + bcm3510_writeB(st,0xa8,v); +// return -EBUSY; + } + +/* Send the start HAB Address (automatically incremented after write of + * HABDATA) and write the HAB Data */ + hab.HABADR_a6.HABADR = 0; + if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0) + return ret; + + for (i = 0; i < len; i++) { + hab.HABDATA_a7 = buf[i]; + if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0) + return ret; + } + +/* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to + * be written) */ + v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1; + if ((ret = bcm3510_writeB(st,0xa8,v)) < 0) + return ret; + +/* Polling method: Wait until the AP finishes processing the HAB request */ + t = jiffies + 1*HZ; + while (time_before(jiffies, t)) { + deb_info("waiting for HAB to complete\n"); + msleep(10); + if ((ret = bcm3510_readB(st,0xa8,&v)) < 0) + return ret; + + if (!v.HABSTAT_a8.HABR) + return 0; + } + + deb_info("send_request execution timed out.\n"); + return -ETIMEDOUT; +} + +static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen) +{ + u8 ob[olen+2],ib[ilen+2]; + int ret = 0; + + ob[0] = cmd; + ob[1] = msgid; + memcpy(&ob[2],obuf,olen); + + deb_hab("hab snd: "); + dbufout(ob,olen+2,deb_hab); + deb_hab("\n"); + + if (down_interruptible(&st->hab_sem) < 0) + return -EAGAIN; + + if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 || + (ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0) + goto error; + + deb_hab("hab get: "); + dbufout(ib,ilen+2,deb_hab); + deb_hab("\n"); + + memcpy(ibuf,&ib[2],ilen); +error: + up(&st->hab_sem); + return ret; +} + +#if 0 +/* not needed, we use a semaphore to prevent HAB races */ +static int bcm3510_is_ap_ready(struct bcm3510_state *st) +{ + bcm3510_register_value ap,hab; + int ret; + + if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 || + (ret = bcm3510_readB(st,0xa2,&ap) < 0)) + return ret; + + if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) { + deb_info("AP is busy\n"); + return -EBUSY; + } + + return 0; +} +#endif + +static int bcm3510_bert_reset(struct bcm3510_state *st) +{ + bcm3510_register_value b; + int ret; + + if ((ret < bcm3510_readB(st,0xfa,&b)) < 0) + return ret; + + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b); + b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b); + + /* clear residual bit counter TODO */ + return 0; +} + +static int bcm3510_refresh_state(struct bcm3510_state *st) +{ + if (time_after(jiffies,st->next_status_check)) { + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1)); + bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2)); + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static int bcm3510_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *status = 0; + if (st->status1.STATUS1.RECEIVER_LOCK) + *status |= FE_HAS_LOCK | FE_HAS_SYNC; + + if (st->status1.STATUS1.FEC_LOCK) + *status |= FE_HAS_VITERBI; + + if (st->status1.STATUS1.OUT_PLL_LOCK) + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1500; + else /* more frequently checks if no lock has been achieved yet */ + st->status_check_interval = 500; + + deb_info("real_status: %02x\n",*status); + return 0; +} + +static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2; + return 0; +} + +static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + *unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1; + return 0; +} + +static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct bcm3510_state* st = fe->demodulator_priv; + s32 t; + + bcm3510_refresh_state(st); + t = st->status2.SIGNAL; + + if (t > 190) + t = 190; + if (t < 90) + t = 90; + + t -= 90; + t = t * 0xff / 100; + /* normalize if necessary */ + *strength = (t << 8) | t; + return 0; +} + +static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_refresh_state(st); + + *snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8); + return 0; +} + +/* tuner frontend programming */ +static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a) +{ + struct bcm3510_hab_cmd_tune c; + memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune)); + +/* I2C Mode disabled, set 16 control / Data pairs */ + c.length = 0x10; + c.clock_width = 0; +/* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to + * logic high (as Configuration) */ + c.misc = 0x10; +/* Set duration of the initial state of TUNCTL = 3.34 micro Sec */ + c.TUNCTL_state = 0x40; + +/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[0].ctrl.size = BITS_8; + c.ctl_dat[0].data = 0x80 | bc; + +/* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[1].ctrl.size = BITS_8; + c.ctl_dat[1].data = 4; + +/* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[2].ctrl.size = BITS_3; + c.ctl_dat[2].data = 0x20; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[3].ctrl.size = BITS_3; + c.ctl_dat[3].ctrl.clk_off = 1; + c.ctl_dat[3].ctrl.cs0 = 1; + c.ctl_dat[3].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[4].ctrl.size = BITS_8; + c.ctl_dat[4].data = n >> 3; + +/* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */ + c.ctl_dat[5].ctrl.size = BITS_8; + c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2); + +/* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */ + c.ctl_dat[6].ctrl.size = BITS_3; + c.ctl_dat[6].data = (a << 6) & 0xdf; + +/* control CS0 pin, pulse byte ? */ + c.ctl_dat[7].ctrl.size = BITS_3; + c.ctl_dat[7].ctrl.clk_off = 1; + c.ctl_dat[7].ctrl.cs0 = 1; + c.ctl_dat[7].data = 0x40; + +/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */ + c.ctl_dat[8].ctrl.size = BITS_8; + c.ctl_dat[8].data = 0x80; + +/* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */ + c.ctl_dat[9].ctrl.size = BITS_8; + c.ctl_dat[9].data = 0x10; + +/* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */ + c.ctl_dat[10].ctrl.size = BITS_3; + c.ctl_dat[10].data = 0x20; + +/* pulse byte */ + c.ctl_dat[11].ctrl.size = BITS_3; + c.ctl_dat[11].ctrl.clk_off = 1; + c.ctl_dat[11].ctrl.cs1 = 1; + c.ctl_dat[11].data = 0x40; + +/* PGM_S18 to PGM_S11 */ + c.ctl_dat[12].ctrl.size = BITS_8; + c.ctl_dat[12].data = 0x2a; + +/* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */ + c.ctl_dat[13].ctrl.size = BITS_8; + c.ctl_dat[13].data = 0x8e; + +/* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */ + c.ctl_dat[14].ctrl.size = BITS_3; + c.ctl_dat[14].data = 0; + +/* Pulse Byte */ + c.ctl_dat[15].ctrl.size = BITS_3; + c.ctl_dat[15].ctrl.clk_off = 1; + c.ctl_dat[15].ctrl.cs1 = 1; + c.ctl_dat[15].data = 0x40; + + return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0); +} + +static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq) +{ + u8 bc,a; + u16 n; + s32 YIntercept,Tfvco1; + + freq /= 1000; + + deb_info("%dkHz:",freq); + /* set Band Switch */ + if (freq <= 168000) + bc = 0x1c; + else if (freq <= 378000) + bc = 0x2c; + else + bc = 0x30; + + if (freq >= 470000) { + freq -= 470001; + YIntercept = 18805; + } else if (freq >= 90000) { + freq -= 90001; + YIntercept = 15005; + } else if (freq >= 76000){ + freq -= 76001; + YIntercept = 14865; + } else { + freq -= 54001; + YIntercept = 14645; + } + + Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10; + + n = Tfvco1 >> 6; + a = Tfvco1 & 0x3f; + + deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a); + if (n >= 16 && n <= 2047) + return bcm3510_tuner_cmd(st,bc,n,a); + + return -EINVAL; +} + +static int bcm3510_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *p) +{ + struct bcm3510_state* st = fe->demodulator_priv; + struct bcm3510_hab_cmd_ext_acquire cmd; + struct bcm3510_hab_cmd_bert_control bert; + int ret; + + memset(&cmd,0,sizeof(cmd)); + switch (p->u.vsb.modulation) { + case QAM_256: + cmd.ACQUIRE0.MODE = 0x1; + cmd.ACQUIRE1.SYM_RATE = 0x1; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x2; + cmd.ACQUIRE1.SYM_RATE = 0x2; + cmd.ACQUIRE1.IF_FREQ = 0x1; + break; +/* case QAM_256: + cmd.ACQUIRE0.MODE = 0x3; + break; + case QAM_128: + cmd.ACQUIRE0.MODE = 0x4; + break; + case QAM_64: + cmd.ACQUIRE0.MODE = 0x5; + break; + case QAM_32: + cmd.ACQUIRE0.MODE = 0x6; + break; + case QAM_16: + cmd.ACQUIRE0.MODE = 0x7; + break;*/ + case VSB_8: + cmd.ACQUIRE0.MODE = 0x8; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + break; + case VSB_16: + cmd.ACQUIRE0.MODE = 0x9; + cmd.ACQUIRE1.SYM_RATE = 0x0; + cmd.ACQUIRE1.IF_FREQ = 0x0; + default: + return -EINVAL; + }; + cmd.ACQUIRE0.OFFSET = 0; + cmd.ACQUIRE0.NTSCSWEEP = 1; + cmd.ACQUIRE0.FA = 1; + cmd.ACQUIRE0.BW = 0; + +/* if (enableOffset) { + cmd.IF_OFFSET0 = xx; + cmd.IF_OFFSET1 = xx; + + cmd.SYM_OFFSET0 = xx; + cmd.SYM_OFFSET1 = xx; + if (enableNtscSweep) { + cmd.NTSC_OFFSET0; + cmd.NTSC_OFFSET1; + } + } */ + bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0); + +/* doing it with different MSGIDs, data book and source differs */ + bert.BE = 0; + bert.unused = 0; + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0); + bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0); + + bcm3510_bert_reset(st); + + if ((ret = bcm3510_set_freq(st,p->frequency)) < 0) + return ret; + + memset(&st->status1,0,sizeof(st->status1)); + memset(&st->status2,0,sizeof(st->status2)); + st->status_check_interval = 500; + +/* Give the AP some time */ + msleep(200); + + return 0; +} + +static int bcm3510_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s) +{ + s->min_delay_ms = 1000; + s->step_size = 0; + s->max_drift = 0; + return 0; +} + +static void bcm3510_release(struct dvb_frontend* fe) +{ + struct bcm3510_state* state = fe->demodulator_priv; + kfree(state); +} + +/* firmware download: + * firmware file is build up like this: + * 16bit addr, 16bit length, 8byte of length + */ +#define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw" + +static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, u8 *b, u16 len) +{ + int ret = 0,i; + bcm3510_register_value vH, vL,vD; + + vH.MADRH_a9 = addr >> 8; + vL.MADRL_aa = addr; + if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret; + if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret; + + for (i = 0; i < len; i++) { + vD.MDATA_ab = b[i]; + if ((ret = bcm3510_writeB(st,0xab,vD)) < 0) + return ret; + } + + return 0; +} + +static int bcm3510_download_firmware(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + const struct firmware *fw; + u16 addr,len; + u8 *b; + int ret,i; + + deb_info("requesting firmware\n"); + if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) { + err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret); + return ret; + } + deb_info("got firmware: %d\n",fw->size); + + b = fw->data; + for (i = 0; i < fw->size;) { + addr = le16_to_cpu( *( (u16 *)&b[i] ) ); + len = le16_to_cpu( *( (u16 *)&b[i+2] ) ); + deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04x\n",addr,len,fw->size); + if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) { + err("firmware download failed: %d\n",ret); + return ret; + } + i += 4 + len; + } + release_firmware(fw); + deb_info("firmware download successfully completed\n"); + return 0; +} + +static int bcm3510_check_firmware_version(struct bcm3510_state *st) +{ + struct bcm3510_hab_cmd_get_version_info ver; + bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver)); + + deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n", + ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version); + + if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION && + ver.config_version == BCM3510_DEF_CONFIG_VERSION && + ver.demod_version == BCM3510_DEF_DEMOD_VERSION) + return 0; + + deb_info("version check failed\n"); + return -ENODEV; +} + +/* (un)resetting the AP */ +static int bcm3510_reset(struct bcm3510_state *st) +{ + int ret; + unsigned long t; + bcm3510_register_value v; + + bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + if (v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_clear_reset(struct bcm3510_state *st) +{ + bcm3510_register_value v; + int ret; + unsigned long t; + + v.raw = 0; + if ((ret = bcm3510_writeB(st,0xa0,v)) < 0) + return ret; + + t = jiffies + 3*HZ; + while (time_before(jiffies, t)) { + msleep(10); + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + + /* verify that reset is cleared */ + if (!v.APSTAT1_a2.RESET) + return 0; + } + deb_info("reset clear timed out\n"); + return -ETIMEDOUT; +} + +static int bcm3510_init_cold(struct bcm3510_state *st) +{ + int ret; + bcm3510_register_value v; + + /* read Acquisation Processor status register and check it is not in RUN mode */ + if ((ret = bcm3510_readB(st,0xa2,&v)) < 0) + return ret; + if (v.APSTAT1_a2.RUN) { + deb_info("AP is already running - firmware already loaded.\n"); + return 0; + } + + deb_info("reset?\n"); + if ((ret = bcm3510_reset(st)) < 0) + return ret; + + deb_info("tristate?\n"); + /* tri-state */ + v.TSTCTL_2e.CTL = 0; + if ((ret = bcm3510_writeB(st,0x2e,v)) < 0) + return ret; + + deb_info("firmware?\n"); + if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 || + (ret = bcm3510_clear_reset(st)) < 0) + return ret; + + /* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */ + + return 0; +} + +static int bcm3510_init(struct dvb_frontend* fe) +{ + struct bcm3510_state* st = fe->demodulator_priv; + bcm3510_register_value j; + struct bcm3510_hab_cmd_set_agc c; + int ret; + + if ((ret = bcm3510_readB(st,0xca,&j)) < 0) + return ret; + + deb_info("JDEC: %02x\n",j.raw); + + switch (j.JDEC_ca.JDEC) { + case JDEC_WAIT_AT_RAM: + deb_info("attempting to download firmware\n"); + if ((ret = bcm3510_init_cold(st)) < 0) + return ret; + case JDEC_EEPROM_LOAD_WAIT: /* fall-through is wanted */ + deb_info("firmware is loaded\n"); + bcm3510_check_firmware_version(st); + break; + default: + return -ENODEV; + } + + memset(&c,0,1); + c.SEL = 1; + bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0); + + return 0; +} + + +static struct dvb_frontend_ops bcm3510_ops; + +struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config, + struct i2c_adapter *i2c) +{ + struct bcm3510_state* state = NULL; + int ret; + bcm3510_register_value v; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct bcm3510_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(struct bcm3510_state)); + + /* setup the state */ + + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops)); + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + + sema_init(&state->hab_sem, 1); + + if ((ret = bcm3510_readB(state,0xe0,&v)) < 0) + goto error; + + deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER); + + if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */ + (v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */ + goto error; + + info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER); + + bcm3510_reset(state); + + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(bcm3510_attach); + +static struct dvb_frontend_ops bcm3510_ops = { + + .info = { + .name = "Broadcom BCM3510 VSB/QAM frontend", + .type = FE_ATSC, + .frequency_min = 54000000, + .frequency_max = 803000000, + /* stepsize is just a guess */ + .frequency_stepsize = 0, + .caps = + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_8VSB | FE_CAN_16VSB | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256 + }, + + .release = bcm3510_release, + + .init = bcm3510_init, + .sleep = bcm3510_sleep, + + .set_frontend = bcm3510_set_frontend, + .get_tune_settings = bcm3510_get_tune_settings, + + .read_status = bcm3510_read_status, + .read_ber = bcm3510_read_ber, + .read_signal_strength = bcm3510_read_signal_strength, + .read_snr = bcm3510_read_snr, + .read_ucblocks = bcm3510_read_unc, +}; + +MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver"); +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_LICENSE("GPL"); |