diff options
Diffstat (limited to 'drivers/net/wireless/wl1251/rx.h')
-rw-r--r-- | drivers/net/wireless/wl1251/rx.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl1251/rx.h b/drivers/net/wireless/wl1251/rx.h new file mode 100644 index 0000000..4448f63 --- /dev/null +++ b/drivers/net/wireless/wl1251/rx.h @@ -0,0 +1,122 @@ +/* + * This file is part of wl1251 + * + * Copyright (c) 1998-2007 Texas Instruments Incorporated + * Copyright (C) 2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __WL1251_RX_H__ +#define __WL1251_RX_H__ + +#include <linux/bitops.h> + +#include "wl1251.h" + +/* + * RX PATH + * + * The Rx path uses a double buffer and an rx_contro structure, each located + * at a fixed address in the device memory. The host keeps track of which + * buffer is available and alternates between them on a per packet basis. + * The size of each of the two buffers is large enough to hold the longest + * 802.3 packet. + * The RX path goes like that: + * 1) The target generates an interrupt each time a new packet is received. + * There are 2 RX interrupts, one for each buffer. + * 2) The host reads the received packet from one of the double buffers. + * 3) The host triggers a target interrupt. + * 4) The target prepares the next RX packet. + */ + +#define WL1251_RX_MAX_RSSI -30 +#define WL1251_RX_MIN_RSSI -95 + +#define WL1251_RX_ALIGN_TO 4 +#define WL1251_RX_ALIGN(len) (((len) + WL1251_RX_ALIGN_TO - 1) & \ + ~(WL1251_RX_ALIGN_TO - 1)) + +#define SHORT_PREAMBLE_BIT BIT(0) +#define OFDM_RATE_BIT BIT(6) +#define PBCC_RATE_BIT BIT(7) + +#define PLCP_HEADER_LENGTH 8 +#define RX_DESC_PACKETID_SHIFT 11 +#define RX_MAX_PACKET_ID 3 + +#define RX_DESC_VALID_FCS 0x0001 +#define RX_DESC_MATCH_RXADDR1 0x0002 +#define RX_DESC_MCAST 0x0004 +#define RX_DESC_STAINTIM 0x0008 +#define RX_DESC_VIRTUAL_BM 0x0010 +#define RX_DESC_BCAST 0x0020 +#define RX_DESC_MATCH_SSID 0x0040 +#define RX_DESC_MATCH_BSSID 0x0080 +#define RX_DESC_ENCRYPTION_MASK 0x0300 +#define RX_DESC_MEASURMENT 0x0400 +#define RX_DESC_SEQNUM_MASK 0x1800 +#define RX_DESC_MIC_FAIL 0x2000 +#define RX_DESC_DECRYPT_FAIL 0x4000 + +struct wl1251_rx_descriptor { + u32 timestamp; /* In microseconds */ + u16 length; /* Paylod length, including headers */ + u16 flags; + + /* + * 0 - 802.11 + * 1 - 802.3 + * 2 - IP + * 3 - Raw Codec + */ + u8 type; + + /* + * Received Rate: + * 0x0A - 1MBPS + * 0x14 - 2MBPS + * 0x37 - 5_5MBPS + * 0x0B - 6MBPS + * 0x0F - 9MBPS + * 0x6E - 11MBPS + * 0x0A - 12MBPS + * 0x0E - 18MBPS + * 0xDC - 22MBPS + * 0x09 - 24MBPS + * 0x0D - 36MBPS + * 0x08 - 48MBPS + * 0x0C - 54MBPS + */ + u8 rate; + + u8 mod_pre; /* Modulation and preamble */ + u8 channel; + + /* + * 0 - 2.4 Ghz + * 1 - 5 Ghz + */ + u8 band; + + s8 rssi; /* in dB */ + u8 rcpi; /* in dB */ + u8 snr; /* in dB */ +} __packed; + +void wl1251_rx(struct wl1251 *wl); + +#endif |