diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 173 |
1 files changed, 170 insertions, 3 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 9337e13..078f2a1 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1,6 +1,6 @@ /* * QLogic Fibre Channel HBA Driver - * Copyright (c) 2003-2005 QLogic Corporation + * Copyright (c) 2003-2008 QLogic Corporation * * See LICENSE.qla2xxx for copyright and licensing details. */ @@ -719,7 +719,7 @@ struct tsk_mgmt_entry { uint16_t timeout; /* Command timeout. */ - uint8_t lun[8]; /* FCP LUN (BE). */ + struct scsi_lun lun; /* FCP LUN (BE). */ uint32_t control_flags; /* Control Flags. */ #define TCF_NOTMCMD_TO_TARGET BIT_31 @@ -793,7 +793,19 @@ struct device_reg_24xx { #define FA_VPD_NVRAM_ADDR 0x48000 #define FA_FEATURE_ADDR 0x4C000 #define FA_FLASH_DESCR_ADDR 0x50000 -#define FA_HW_EVENT_ADDR 0x54000 +#define FA_HW_EVENT0_ADDR 0x54000 +#define FA_HW_EVENT1_ADDR 0x54200 +#define FA_HW_EVENT_SIZE 0x200 +#define FA_HW_EVENT_ENTRY_SIZE 4 +/* + * Flash Error Log Event Codes. + */ +#define HW_EVENT_RESET_ERR 0xF00B +#define HW_EVENT_ISP_ERR 0xF020 +#define HW_EVENT_PARITY_ERR 0xF022 +#define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 +#define HW_EVENT_FLASH_FW_ERR 0xF024 + #define FA_BOOT_LOG_ADDR 0x58000 #define FA_FW_DUMP0_ADDR 0x60000 #define FA_FW_DUMP1_ADDR 0x70000 @@ -1174,4 +1186,159 @@ struct vf_evfp_entry_24xx { }; /* END MID Support ***********************************************************/ + +/* Flash Description Table ***************************************************/ + +struct qla_fdt_layout { + uint8_t sig[4]; + uint16_t version; + uint16_t len; + uint16_t checksum; + uint8_t unused1[2]; + uint8_t model[16]; + uint16_t man_id; + uint16_t id; + uint8_t flags; + uint8_t erase_cmd; + uint8_t alt_erase_cmd; + uint8_t wrt_enable_cmd; + uint8_t wrt_enable_bits; + uint8_t wrt_sts_reg_cmd; + uint8_t unprotect_sec_cmd; + uint8_t read_man_id_cmd; + uint32_t block_size; + uint32_t alt_block_size; + uint32_t flash_size; + uint32_t wrt_enable_data; + uint8_t read_id_addr_len; + uint8_t wrt_disable_bits; + uint8_t read_dev_id_len; + uint8_t chip_erase_cmd; + uint16_t read_timeout; + uint8_t protect_sec_cmd; + uint8_t unused2[65]; +}; + +/* 84XX Support **************************************************************/ + +#define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ +#define A84_PANIC_RECOVERY 0x1 +#define A84_OP_LOGIN_COMPLETE 0x2 +#define A84_DIAG_LOGIN_COMPLETE 0x3 +#define A84_GOLD_LOGIN_COMPLETE 0x4 + +#define MBC_ISP84XX_RESET 0x3a /* Reset. */ + +#define FSTATE_REMOTE_FC_DOWN BIT_0 +#define FSTATE_NSL_LINK_DOWN BIT_1 +#define FSTATE_IS_DIAG_FW BIT_2 +#define FSTATE_LOGGED_IN BIT_3 +#define FSTATE_WAITING_FOR_VERIFY BIT_4 + +#define VERIFY_CHIP_IOCB_TYPE 0x1B +struct verify_chip_entry_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + uint16_t options; +#define VCO_DONT_UPDATE_FW BIT_0 +#define VCO_FORCE_UPDATE BIT_1 +#define VCO_DONT_RESET_UPDATE BIT_2 +#define VCO_DIAG_FW BIT_3 +#define VCO_END_OF_DATA BIT_14 +#define VCO_ENABLE_DSD BIT_15 + + uint16_t reserved_1; + + uint16_t data_seg_cnt; + uint16_t reserved_2[3]; + + uint32_t fw_ver; + uint32_t exchange_address; + + uint32_t reserved_3[3]; + uint32_t fw_size; + uint32_t fw_seq_size; + uint32_t relative_offset; + + uint32_t dseg_address[2]; + uint32_t dseg_length; +}; + +struct verify_chip_rsp_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + uint16_t comp_status; +#define CS_VCS_CHIP_FAILURE 0x3 +#define CS_VCS_BAD_EXCHANGE 0x8 +#define CS_VCS_SEQ_COMPLETEi 0x40 + + uint16_t failure_code; +#define VFC_CHECKSUM_ERROR 0x1 +#define VFC_INVALID_LEN 0x2 +#define VFC_ALREADY_IN_PROGRESS 0x8 + + uint16_t reserved_1[4]; + + uint32_t fw_ver; + uint32_t exchange_address; + + uint32_t reserved_2[6]; +}; + +#define ACCESS_CHIP_IOCB_TYPE 0x2B +struct access_chip_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + uint16_t options; +#define ACO_DUMP_MEMORY 0x0 +#define ACO_LOAD_MEMORY 0x1 +#define ACO_CHANGE_CONFIG_PARAM 0x2 +#define ACO_REQUEST_INFO 0x3 + + uint16_t reserved1; + + uint16_t dseg_count; + uint16_t reserved2[3]; + + uint32_t parameter1; + uint32_t parameter2; + uint32_t parameter3; + + uint32_t reserved3[3]; + uint32_t total_byte_cnt; + uint32_t reserved4; + + uint32_t dseg_address[2]; + uint32_t dseg_length; +}; + +struct access_chip_rsp_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + uint16_t comp_status; + uint16_t failure_code; + uint32_t residual_count; + + uint32_t reserved[12]; +}; #endif |