diff options
Diffstat (limited to 'drivers/video/geode/display_gx.c')
| -rw-r--r-- | drivers/video/geode/display_gx.c | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c new file mode 100644 index 0000000..825c340 --- /dev/null +++ b/drivers/video/geode/display_gx.c @@ -0,0 +1,156 @@ +/* + * Geode GX display controller. + * + * Copyright (C) 2005 Arcom Control Systems Ltd. + * + * Portions from AMD's original 2.4 driver: + * Copyright (C) 2004 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by * the + * Free Software Foundation; either version 2 of the License, or * (at your + * option) any later version. + */ +#include <linux/spinlock.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <asm/io.h> +#include <asm/div64.h> +#include <asm/delay.h> + +#include "geodefb.h" +#include "display_gx.h" + +int gx_frame_buffer_size(void) +{ + /* Assuming 16 MiB. */ + return 16*1024*1024; +} + +int gx_line_delta(int xres, int bpp) +{ + /* Must be a multiple of 8 bytes. */ + return (xres * (bpp >> 3) + 7) & ~0x7; +} + +static void gx_set_mode(struct fb_info *info) +{ + struct geodefb_par *par = info->par; + u32 gcfg, dcfg; + int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal; + int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; + + /* Unlock the display controller registers. */ + readl(par->dc_regs + DC_UNLOCK); + writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK); + + gcfg = readl(par->dc_regs + DC_GENERAL_CFG); + dcfg = readl(par->dc_regs + DC_DISPLAY_CFG); + + /* Disable the timing generator. */ + dcfg &= ~(DC_DCFG_TGEN); + writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); + + /* Wait for pending memory requests before disabling the FIFO load. */ + udelay(100); + + /* Disable FIFO load and compression. */ + gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE); + writel(gcfg, par->dc_regs + DC_GENERAL_CFG); + + /* Setup DCLK and its divisor. */ + par->vid_ops->set_dclk(info); + + /* + * Setup new mode. + */ + + /* Clear all unused feature bits. */ + gcfg &= DC_GCFG_YUVM | DC_GCFG_VDSE; + dcfg = 0; + + /* Set FIFO priority (default 6/5) and enable. */ + /* FIXME: increase fifo priority for 1280x1024 and higher modes? */ + gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE; + + /* Framebuffer start offset. */ + writel(0, par->dc_regs + DC_FB_ST_OFFSET); + + /* Line delta and line buffer length. */ + writel(info->fix.line_length >> 3, par->dc_regs + DC_GFX_PITCH); + writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2, + par->dc_regs + DC_LINE_SIZE); + + /* Enable graphics and video data and unmask address lines. */ + dcfg |= DC_DCFG_GDEN | DC_DCFG_VDEN | DC_DCFG_A20M | DC_DCFG_A18M; + + /* Set pixel format. */ + switch (info->var.bits_per_pixel) { + case 8: + dcfg |= DC_DCFG_DISP_MODE_8BPP; + break; + case 16: + dcfg |= DC_DCFG_DISP_MODE_16BPP; + dcfg |= DC_DCFG_16BPP_MODE_565; + break; + case 32: + dcfg |= DC_DCFG_DISP_MODE_24BPP; + dcfg |= DC_DCFG_PALB; + break; + } + + /* Enable timing generator. */ + dcfg |= DC_DCFG_TGEN; + + /* Horizontal and vertical timings. */ + hactive = info->var.xres; + hblankstart = hactive; + hsyncstart = hblankstart + info->var.right_margin; + hsyncend = hsyncstart + info->var.hsync_len; + hblankend = hsyncend + info->var.left_margin; + htotal = hblankend; + + vactive = info->var.yres; + vblankstart = vactive; + vsyncstart = vblankstart + info->var.lower_margin; + vsyncend = vsyncstart + info->var.vsync_len; + vblankend = vsyncend + info->var.upper_margin; + vtotal = vblankend; + + writel((hactive - 1) | ((htotal - 1) << 16), par->dc_regs + DC_H_ACTIVE_TIMING); + writel((hblankstart - 1) | ((hblankend - 1) << 16), par->dc_regs + DC_H_BLANK_TIMING); + writel((hsyncstart - 1) | ((hsyncend - 1) << 16), par->dc_regs + DC_H_SYNC_TIMING); + + writel((vactive - 1) | ((vtotal - 1) << 16), par->dc_regs + DC_V_ACTIVE_TIMING); + writel((vblankstart - 1) | ((vblankend - 1) << 16), par->dc_regs + DC_V_BLANK_TIMING); + writel((vsyncstart - 1) | ((vsyncend - 1) << 16), par->dc_regs + DC_V_SYNC_TIMING); + + /* Write final register values. */ + writel(dcfg, par->dc_regs + DC_DISPLAY_CFG); + writel(gcfg, par->dc_regs + DC_GENERAL_CFG); + + par->vid_ops->configure_display(info); + + /* Relock display controller registers */ + writel(0, par->dc_regs + DC_UNLOCK); +} + +static void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno, + unsigned red, unsigned green, unsigned blue) +{ + struct geodefb_par *par = info->par; + int val; + + /* Hardware palette is in RGB 8-8-8 format. */ + val = (red << 8) & 0xff0000; + val |= (green) & 0x00ff00; + val |= (blue >> 8) & 0x0000ff; + + writel(regno, par->dc_regs + DC_PAL_ADDRESS); + writel(val, par->dc_regs + DC_PAL_DATA); +} + +struct geode_dc_ops gx_dc_ops = { + .set_mode = gx_set_mode, + .set_palette_reg = gx_set_hw_palette_reg, +}; |