aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/net/Kconfig13
-rw-r--r--drivers/usb/net/Makefile1
-rw-r--r--drivers/usb/net/asix.c948
-rw-r--r--drivers/usb/net/usbnet.c936
-rw-r--r--drivers/usb/net/usbnet.h8
5 files changed, 1010 insertions, 896 deletions
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 6399b43..4fb51b9 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -202,23 +202,22 @@ config USB_CDCETHER
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
-comment "USB Network Adapters"
- depends on USB_USBNET
+comment "Drivers built using the usbnet core"
-config USB_AX8817X
- boolean "ASIX AX88xxx Based USB 2.0 Ethernet Devices"
+config USB_NET_AX8817X
+ tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
select MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
- 10/100 Ethernet devices.
+ 10/100 Ethernet adapters.
This driver should work with at least the following devices:
* Aten UC210T
* ASIX AX88172
- * Billionton Systems, USB2AR
+ * Billionton Systems, USB2AR
* Buffalo LUA-U2-KTX
* Corega FEther USB2-TX
* D-Link DUB-E100
@@ -231,7 +230,7 @@ config USB_AX8817X
* TrendNet TU2-ET100
This driver creates an interface named "ethX", where X depends on
- what other networking devices you have in use.
+ what other networking devices you have in use.
config USB_NET_CDC_SUBSET
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile
index 23608cc..60dc91e 100644
--- a/drivers/usb/net/Makefile
+++ b/drivers/usb/net/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
obj-$(CONFIG_USB_RTL8150) += rtl8150.o
+obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDC_SUBSET) += cdc_subset.o
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
new file mode 100644
index 0000000..861f00a
--- /dev/null
+++ b/drivers/usb/net/asix.c
@@ -0,0 +1,948 @@
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+// #define DEBUG // error path messages, extra info
+// #define VERBOSE // more; success messages
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+# define DEBUG
+#endif
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+
+#include "usbnet.h"
+
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII 0x06
+#define AX_CMD_READ_MII_REG 0x07
+#define AX_CMD_WRITE_MII_REG 0x08
+#define AX_CMD_SET_HW_MII 0x0a
+#define AX_CMD_READ_EEPROM 0x0b
+#define AX_CMD_WRITE_EEPROM 0x0c
+#define AX_CMD_WRITE_ENABLE 0x0d
+#define AX_CMD_WRITE_DISABLE 0x0e
+#define AX_CMD_WRITE_RX_CTL 0x10
+#define AX_CMD_READ_IPG012 0x11
+#define AX_CMD_WRITE_IPG0 0x12
+#define AX_CMD_WRITE_IPG1 0x13
+#define AX_CMD_WRITE_IPG2 0x14
+#define AX_CMD_WRITE_MULTI_FILTER 0x16
+#define AX_CMD_READ_NODE_ID 0x17
+#define AX_CMD_READ_PHY_ID 0x19
+#define AX_CMD_READ_MEDIUM_STATUS 0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
+#define AX_CMD_READ_MONITOR_MODE 0x1c
+#define AX_CMD_WRITE_MONITOR_MODE 0x1d
+#define AX_CMD_WRITE_GPIOS 0x1f
+#define AX_CMD_SW_RESET 0x20
+#define AX_CMD_SW_PHY_STATUS 0x21
+#define AX_CMD_SW_PHY_SELECT 0x22
+#define AX88772_CMD_READ_NODE_ID 0x13
+
+#define AX_MONITOR_MODE 0x01
+#define AX_MONITOR_LINK 0x02
+#define AX_MONITOR_MAGIC 0x04
+#define AX_MONITOR_HSFS 0x10
+
+/* AX88172 Medium Status Register values */
+#define AX_MEDIUM_FULL_DUPLEX 0x02
+#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
+#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
+
+#define AX_MCAST_FILTER_SIZE 8
+#define AX_MAX_MCAST 64
+
+#define AX_EEPROM_LEN 0x40
+
+#define AX_SWRESET_CLEAR 0x00
+#define AX_SWRESET_RR 0x01
+#define AX_SWRESET_RT 0x02
+#define AX_SWRESET_PRTE 0x04
+#define AX_SWRESET_PRL 0x08
+#define AX_SWRESET_BZ 0x10
+#define AX_SWRESET_IPRL 0x20
+#define AX_SWRESET_IPPD 0x40
+
+#define AX88772_IPG0_DEFAULT 0x15
+#define AX88772_IPG1_DEFAULT 0x0c
+#define AX88772_IPG2_DEFAULT 0x12
+
+#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
+#define AX88772_MEDIUM_RESERVED 0x0004
+#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
+#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
+#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
+#define AX88772_MEDIUM_RX_ENABLE 0x0100
+#define AX88772_MEDIUM_100MB 0x0200
+#define AX88772_MEDIUM_DEFAULT \
+ (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
+ AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
+ AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
+
+#define AX_EEPROM_MAGIC 0xdeadbeef
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct ax8817x_data {
+ u8 multi_filter[AX_MCAST_FILTER_SIZE];
+};
+
+struct ax88172_int_data {
+ u16 res1;
+ u8 link;
+ u16 res2;
+ u8 status;
+ u16 res3;
+} __attribute__ ((packed));
+
+static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_GET_TIMEOUT);
+}
+
+static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ return usb_control_msg(
+ dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ cmd,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ data,
+ size,
+ USB_CTRL_SET_TIMEOUT);
+}
+
+static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+
+ if (urb->status < 0)
+ printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+ urb->status);
+
+ kfree(req);
+ usb_free_urb(urb);
+}
+
+static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+{
+ struct ax88172_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ if (link) {
+ netif_carrier_on(dev->net);
+ usbnet_defer_kevent (dev, EVENT_LINK_RESET );
+ } else
+ netif_carrier_off(dev->net);
+ devdbg(dev, "ax8817x - Link Status is: %d", link);
+ }
+}
+
+static void
+ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ struct usb_ctrlrequest *req;
+ int status;
+ struct urb *urb;
+
+ if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
+ devdbg(dev, "Error allocating URB in write_cmd_async!");
+ return;
+ }
+
+ if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
+ deverr(dev, "Failed to allocate memory for control request");
+ usb_free_urb(urb);
+ return;
+ }
+
+ req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ req->bRequest = cmd;
+ req->wValue = cpu_to_le16(value);
+ req->wIndex = cpu_to_le16(index);
+ req->wLength = cpu_to_le16(size);
+
+ usb_fill_control_urb(urb, dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ (void *)req, data, size,
+ ax8817x_async_cmd_callback, req);
+
+ if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+ deverr(dev, "Error submitting the control message: status=%d",
+ status);
+ kfree(req);
+ usb_free_urb(urb);
+ }
+}
+
+static void ax8817x_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+ u8 rx_ctl = 0x8c;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= 0x01;
+ } else if (net->flags & IFF_ALLMULTI
+ || net->mc_count > AX_MAX_MCAST) {
+ rx_ctl |= 0x02;
+ } else if (net->mc_count == 0) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later */
+ struct dev_mc_list *mc_list = net->mc_list;
+ u32 crc_bits;
+ int i;
+
+ memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ for (i = 0; i < net->mc_count; i++) {
+ crc_bits =
+ ether_crc(ETH_ALEN,
+ mc_list->dmi_addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ mc_list = mc_list->next;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= 0x10;
+ }
+
+ ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+
+ return res & 0xffff;
+}
+
+/* same as above, but converts resulting value to cpu byte order */
+static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+{
+ return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+}
+
+static void
+ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(netdev);
+ u16 res = val;
+ u8 buf[1];
+
+ ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+ (__u16)loc, 2, (u16 *)&res);
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+}
+
+/* same as above, but converts new value to le16 byte order before writing */
+static void
+ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+{
+ ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u8 mode;
+
+ mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+ if (res & LPA_DUPLEX)
+ mode |= AX_MEDIUM_FULL_DUPLEX;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static void
+ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & AX_MONITOR_MODE) {
+ if (opt & AX_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & AX_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+ }
+}
+
+static int
+ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+ u8 buf[1];
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= AX_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= AX_MONITOR_MAGIC;
+ if (opt != 0)
+ opt |= AX_MONITOR_MODE;
+
+ if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, &buf) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ax8817x_get_eeprom_len(struct net_device *net)
+{
+ return AX_EEPROM_LEN;
+}
+
+static int ax8817x_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u16 *ebuf = (u16 *)data;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = AX_EEPROM_MAGIC;
+
+ /* ax8817x returns 2 bytes from eeprom on read */
+ for (i=0; i < eeprom->len / 2; i++) {
+ if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+ eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void ax8817x_get_drvinfo (struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ info->eedump_len = 0x3e;
+}
+
+static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_gset(&dev->mii,cmd);
+}
+
+static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_ethtool_sset(&dev->mii,cmd);
+}
+
+/* We need to override some ethtool_ops so we require our
+ own structure so we don't interfere with other usbnet
+ devices that may be connected at the same time. */
+static struct ethtool_ops ax8817x_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret = 0;
+ void *buf;
+ int i;
+ unsigned long gpio_bits = dev->driver_info->data;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(ETH_ALEN, GFP_KERNEL);
+ if(!buf) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Toggle the GPIOs in a manufacturer/model specific way */
+ for (i = 2; i >= 0; i--) {
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ (gpio_bits >> (i * 8)) & 0xff, 0, 0,
+ buf)) < 0)
+ goto out2;
+ msleep(5);
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x80, 0, 0, buf)) < 0) {
+ dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ 0, 0, 6, buf)) < 0) {
+ dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0x3f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = *((u8 *)buf + 1);
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+ mii_nway_restart(&dev->mii);
+
+ return 0;
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static struct ethtool_ops ax88772_ethtool_ops = {
+ .get_drvinfo = ax8817x_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = ax8817x_get_wol,
+ .set_wol = ax8817x_set_wol,
+ .get_eeprom_len = ax8817x_get_eeprom_len,
+ .get_eeprom = ax8817x_get_eeprom,
+ .get_settings = ax8817x_get_settings,
+ .set_settings = ax8817x_set_settings,
+};
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+ void *buf;
+
+ usbnet_get_endpoints(dev,intf);
+
+ buf = kmalloc(6, GFP_KERNEL);
+ if(!buf) {
+ dbg ("Cannot allocate memory for buffer");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ 0x00B0, 0, 0, buf)) < 0)
+ goto out2;
+
+ msleep(5);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+ 0x0001, 0, 0, buf)) < 0) {
+ dbg("Select PHY #1 failed: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to power down internal PHY: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to perform software reset: %d", ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Failed to set Internal/External PHY reset control: %d",
+ ret);
+ goto out2;
+ }
+
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
+ 0x0000, 0, 0, buf)) < 0) {
+ dbg("Failed to reset RX_CTL: %d", ret);
+ goto out2;
+ }
+
+ /* Get the MAC address */
+ memset(buf, 0, ETH_ALEN);
+ if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+ 0, 0, ETH_ALEN, buf)) < 0) {
+ dbg("Failed to read MAC address: %d", ret);
+ goto out2;
+ }
+ memcpy(dev->net->dev_addr, buf, ETH_ALEN);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
+ 0, 0, 0, buf)) < 0) {
+ dbg("Enabling software MII failed: %d", ret);
+ goto out2;
+ }
+
+ if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+ 0x0010, 2, 2, buf)) < 0)
+ || (*((u16 *)buf) != 0x003b)) {
+ dbg("Read PHY register 2 must be 0x3b00: %d", ret);
+ goto out2;
+ }
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = ax8817x_mdio_read;
+ dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.phy_id_mask = 0xff;
+ dev->mii.reg_num_mask = 0xff;
+ dev->net->do_ioctl = ax8817x_ioctl;
+
+ /* Get the PHY id */
+ if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 0) {
+ dbg("Error reading PHY ID: %02x", ret);
+ goto out2;
+ } else if (ret < 2) {
+ /* this should always return 2 bytes */
+ dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
+ ret);
+ ret = -EIO;
+ goto out2;
+ }
+ dev->mii.phy_id = *((u8 *)buf + 1);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set external PHY reset pin level: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
+ AX_SWRESET_IPRL | AX_SWRESET_PRL,
+ 0, 0, buf)) < 0) {
+ dbg("Set Internal/External PHY reset control: %d", ret);
+ goto out2;
+ }
+ msleep(150);
+
+
+ dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->ethtool_ops = &ax88772_ethtool_ops;
+
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+ AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
+ dbg("Write medium mode register: %d", ret);
+ goto out2;
+ }
+
+ if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+ AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
+ dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
+ goto out2;
+ }
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
+ dbg("Failed to set hardware MII: %02x", ret);
+ goto out2;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ if ((ret =
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
+ buf)) < 0) {
+ dbg("Reset RX_CTL failed: %d", ret);
+ goto out2;
+ }
+
+ kfree(buf);
+
+ /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+ if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+ /* hard_mtu is still the default - the device does not support
+ jumbo eth frames */
+ dev->rx_urb_size = 2048;
+ }
+
+ return 0;
+
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ u8 *head;
+ u32 header;
+ char *packet;
+ struct sk_buff *ax_skb;
+ u16 size;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+
+ skb_pull(skb, 4);
+
+ while (skb->len > 0) {
+ if ((short)(header & 0x0000ffff) !=
+ ~((short)((header & 0xffff0000) >> 16))) {
+ devdbg(dev,"header length data is error");
+ }
+ /* get the packet length */
+ size = (u16) (header & 0x0000ffff);
+
+ if ((skb->len) - ((size + 1) & 0xfffe) == 0)
+ return 2;
+ if (size > ETH_FRAME_LEN) {
+ devdbg(dev,"invalid rx length %d", size);
+ return 0;
+ }
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (ax_skb) {
+ ax_skb->len = size;
+ ax_skb->data = packet;
+ ax_skb->tail = packet + size;
+ usbnet_skb_return(dev, ax_skb);
+ } else {
+ return 0;
+ }
+
+ skb_pull(skb, (size + 1) & 0xfffe);
+
+ if (skb->len == 0)
+ break;
+
+ head = (u8 *) skb->data;
+ memcpy(&header, head, sizeof(header));
+ le32_to_cpus(&header);
+ packet = head + sizeof(header);
+ skb_pull(skb, 4);
+ }
+
+ if (skb->len < 0) {
+ devdbg(dev,"invalid rx length %d", skb->len);
+ return 0;
+ }
+ return 1;
+}
+
+static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ unsigned flags)
+{
+ int padlen;
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 packet_len;
+ u32 padbytes = 0xffff0000;
+
+ padlen = ((skb->len + 4) % 512) ? 0 : 4;
+
+ if ((!skb_cloned(skb))
+ && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data, skb->len);
+ skb->tail = skb->data + skb->len;
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ memcpy(skb->data, &packet_len, sizeof(packet_len));
+
+ if ((skb->len % 512) == 0) {
+ memcpy( skb->tail, &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+ return skb;
+}
+
+static int ax88772_link_reset(struct usbnet *dev)
+{
+ u16 lpa;
+ u16 adv;
+ u16 res;
+ u16 mode;
+
+ mode = AX88772_MEDIUM_DEFAULT;
+ lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ res = mii_nway_result(lpa|adv);
+
+ if ((res & LPA_DUPLEX) == 0)
+ mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
+ if ((res & LPA_100) == 0)
+ mode &= ~AX88772_MEDIUM_100MB;
+ ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+
+ return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+ .description = "ASIX AX8817x USB 2.0 Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+ .description = "DLink DUB-E100 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+ .description = "Netgear FA-120 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+ .description = "Hawking UF200 USB Ethernet",
+ .bind = ax8817x_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88172_link_reset,
+ .reset = ax88172_link_reset,
+ .flags = FLAG_ETHER,
+ .data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+ .description = "ASIX AX88772 USB 2.0 Ethernet",
+ .bind = ax88772_bind,
+ .status = ax8817x_status,
+ .link_reset = ax88772_link_reset,
+ .reset = ax88772_link_reset,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88772_rx_fixup,
+ .tx_fixup = ax88772_tx_fixup,
+ .data = 0x00130103,
+};
+
+static const struct usb_device_id products [] = {
+{
+ // Linksys USB200M
+ USB_DEVICE (0x077b, 0x2226),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Netgear FA120
+ USB_DEVICE (0x0846, 0x1040),
+ .driver_info = (unsigned long) &netgear_fa120_info,
+}, {
+ // DLink DUB-E100
+ USB_DEVICE (0x2001, 0x1a00),
+ .driver_info = (unsigned long) &dlink_dub_e100_info,
+}, {
+ // Intellinet, ST Lab USB Ethernet
+ USB_DEVICE (0x0b95, 0x1720),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Hawking UF200, TrendNet TU2-ET100
+ USB_DEVICE (0x07b8, 0x420a),
+ .driver_info = (unsigned long) &hawking_uf200_info,
+}, {
+ // Billionton Systems, USB2AR
+ USB_DEVICE (0x08dd, 0x90ff),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ATEN UC210T
+ USB_DEVICE (0x0557, 0x2009),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Buffalo LUA-U2-KTX
+ USB_DEVICE (0x0411, 0x003d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+ USB_DEVICE (0x6189, 0x182d),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // corega FEther USB2-TX
+ USB_DEVICE (0x07aa, 0x0017),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // Surecom EP-1427X-2
+ USB_DEVICE (0x1189, 0x0893),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // goodway corp usb gwusb2e
+ USB_DEVICE (0x1631, 0x6200),
+ .driver_info = (unsigned long) &ax8817x_info,
+}, {
+ // ASIX AX88772 10/100
+ USB_DEVICE (0x0b95, 0x7720),
+ .driver_info = (unsigned long) &ax88772_info,
+},
+ { }, // END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+ .owner = THIS_MODULE,
+ .name = "asix",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+};
+
+static int __init asix_init(void)
+{
+ return usb_register(&asix_driver);
+}
+module_init(asix_init);
+
+static void __exit asix_exit(void)
+{
+ usb_deregister(&asix_driver);
+}
+module_exit(asix_exit);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 57b41fb..99a4881 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -3,8 +3,6 @@
* Copyright (C) 2000-2005 by David Brownell
* Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
- * Copyright (c) 2002-2003 TiVo Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -156,9 +154,6 @@
#define RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
#define TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? 60 : 4)
-/* packets are always ethernet, sometimes wrapped in other framing */
-#define MIN_PACKET sizeof(struct ethhdr)
-
// reawaken network queue this soon after stopping; else watchdog barks
#define TX_TIMEOUT_JIFFIES (5*HZ)
@@ -186,11 +181,7 @@ MODULE_PARM_DESC (msg_level, "Override default message level");
/*-------------------------------------------------------------------------*/
-static void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
static u32 usbnet_get_link (struct net_device *);
-static u32 usbnet_get_msglevel (struct net_device *);
-static void usbnet_set_msglevel (struct net_device *, u32);
-static void defer_kevent (struct usbnet *, int);
/* mostly for PDA style devices, which are always connected if present */
static int always_connected (struct usbnet *dev)
@@ -199,8 +190,7 @@ static int always_connected (struct usbnet *dev)
}
/* handles CDC Ethernet and many other network "bulk data" interfaces */
-static int
-get_endpoints (struct usbnet *dev, struct usb_interface *intf)
+int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
{
int tmp;
struct usb_host_interface *alt = NULL;
@@ -264,6 +254,7 @@ get_endpoints (struct usbnet *dev, struct usb_interface *intf)
dev->status = status;
return 0;
}
+EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
static void intr_complete (struct urb *urb, struct pt_regs *regs);
@@ -303,7 +294,11 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf)
return 0;
}
-static void skb_return (struct usbnet *dev, struct sk_buff *skb)
+/* Passes this packet up the stack, updating its accounting.
+ * Some link protocols batch packets, so their rx_fixup paths
+ * can return clones as well as just modify the original skb.
+ */
+void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
{
int status;
@@ -320,784 +315,7 @@ static void skb_return (struct usbnet *dev, struct sk_buff *skb)
if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
devdbg (dev, "netif_rx status %d", status);
}
-
-
-#ifdef CONFIG_USB_AX8817X
-/* ASIX AX8817X based USB 2.0 Ethernet Devices */
-
-#define HAVE_HARDWARE
-#define NEED_MII
-
-#include <linux/crc32.h>
-
-#define AX_CMD_SET_SW_MII 0x06
-#define AX_CMD_READ_MII_REG 0x07
-#define AX_CMD_WRITE_MII_REG 0x08
-#define AX_CMD_SET_HW_MII 0x0a
-#define AX_CMD_READ_EEPROM 0x0b
-#define AX_CMD_WRITE_EEPROM 0x0c
-#define AX_CMD_WRITE_ENABLE 0x0d
-#define AX_CMD_WRITE_DISABLE 0x0e
-#define AX_CMD_WRITE_RX_CTL 0x10
-#define AX_CMD_READ_IPG012 0x11
-#define AX_CMD_WRITE_IPG0 0x12
-#define AX_CMD_WRITE_IPG1 0x13
-#define AX_CMD_WRITE_IPG2 0x14
-#define AX_CMD_WRITE_MULTI_FILTER 0x16
-#define AX_CMD_READ_NODE_ID 0x17
-#define AX_CMD_READ_PHY_ID 0x19
-#define AX_CMD_READ_MEDIUM_STATUS 0x1a
-#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
-#define AX_CMD_READ_MONITOR_MODE 0x1c
-#define AX_CMD_WRITE_MONITOR_MODE 0x1d
-#define AX_CMD_WRITE_GPIOS 0x1f
-#define AX_CMD_SW_RESET 0x20
-#define AX_CMD_SW_PHY_STATUS 0x21
-#define AX_CMD_SW_PHY_SELECT 0x22
-#define AX88772_CMD_READ_NODE_ID 0x13
-
-#define AX_MONITOR_MODE 0x01
-#define AX_MONITOR_LINK 0x02
-#define AX_MONITOR_MAGIC 0x04
-#define AX_MONITOR_HSFS 0x10
-
-/* AX88172 Medium Status Register values */
-#define AX_MEDIUM_FULL_DUPLEX 0x02
-#define AX_MEDIUM_TX_ABORT_ALLOW 0x04
-#define AX_MEDIUM_FLOW_CONTROL_EN 0x10
-
-#define AX_MCAST_FILTER_SIZE 8
-#define AX_MAX_MCAST 64
-
-#define AX_EEPROM_LEN 0x40
-
-#define AX_SWRESET_CLEAR 0x00
-#define AX_SWRESET_RR 0x01
-#define AX_SWRESET_RT 0x02
-#define AX_SWRESET_PRTE 0x04
-#define AX_SWRESET_PRL 0x08
-#define AX_SWRESET_BZ 0x10
-#define AX_SWRESET_IPRL 0x20
-#define AX_SWRESET_IPPD 0x40
-
-#define AX88772_IPG0_DEFAULT 0x15
-#define AX88772_IPG1_DEFAULT 0x0c
-#define AX88772_IPG2_DEFAULT 0x12
-
-#define AX88772_MEDIUM_FULL_DUPLEX 0x0002
-#define AX88772_MEDIUM_RESERVED 0x0004
-#define AX88772_MEDIUM_RX_FC_ENABLE 0x0010
-#define AX88772_MEDIUM_TX_FC_ENABLE 0x0020
-#define AX88772_MEDIUM_PAUSE_FORMAT 0x0080
-#define AX88772_MEDIUM_RX_ENABLE 0x0100
-#define AX88772_MEDIUM_100MB 0x0200
-#define AX88772_MEDIUM_DEFAULT \
- (AX88772_MEDIUM_FULL_DUPLEX | AX88772_MEDIUM_RX_FC_ENABLE | \
- AX88772_MEDIUM_TX_FC_ENABLE | AX88772_MEDIUM_100MB | \
- AX88772_MEDIUM_RESERVED | AX88772_MEDIUM_RX_ENABLE )
-
-#define AX_EEPROM_MAGIC 0xdeadbeef
-
-/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct ax8817x_data {
- u8 multi_filter[AX_MCAST_FILTER_SIZE];
-};
-
-struct ax88172_int_data {
- u16 res1;
- u8 link;
- u16 res2;
- u8 status;
- u16 res3;
-} __attribute__ ((packed));
-
-static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- return usb_control_msg(
- dev->udev,
- usb_rcvctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- data,
- size,
- CONTROL_TIMEOUT_MS);
-}
-
-static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- return usb_control_msg(
- dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- data,
- size,
- CONTROL_TIMEOUT_MS);
-}
-
-static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
-{
- struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-
- if (urb->status < 0)
- printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
- urb->status);
-
- kfree(req);
- usb_free_urb(urb);
-}
-
-static void ax8817x_status(struct usbnet *dev, struct urb *urb)
-{
- struct ax88172_int_data *event;
- int link;
-
- if (urb->actual_length < 8)
- return;
-
- event = urb->transfer_buffer;
- link = event->link & 0x01;
- if (netif_carrier_ok(dev->net) != link) {
- if (link) {
- netif_carrier_on(dev->net);
- defer_kevent (dev, EVENT_LINK_RESET );
- } else
- netif_carrier_off(dev->net);
- devdbg(dev, "ax8817x - Link Status is: %d", link);
- }
-}
-
-static void ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- struct usb_ctrlrequest *req;
- int status;
- struct urb *urb;
-
- if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
- devdbg(dev, "Error allocating URB in write_cmd_async!");
- return;
- }
-
- if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
- deverr(dev, "Failed to allocate memory for control request");
- usb_free_urb(urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- req->bRequest = cmd;
- req->wValue = cpu_to_le16(value);
- req->wIndex = cpu_to_le16(index);
- req->wLength = cpu_to_le16(size);
-
- usb_fill_control_urb(urb, dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- (void *)req, data, size,
- ax8817x_async_cmd_callback, req);
-
- if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
- deverr(dev, "Error submitting the control message: status=%d", status);
- kfree(req);
- usb_free_urb(urb);
- }
-}
-
-static void ax8817x_set_multicast(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
- struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
- u8 rx_ctl = 0x8c;
-
- if (net->flags & IFF_PROMISC) {
- rx_ctl |= 0x01;
- } else if (net->flags & IFF_ALLMULTI
- || net->mc_count > AX_MAX_MCAST) {
- rx_ctl |= 0x02;
- } else if (net->mc_count == 0) {
- /* just broadcast and directed */
- } else {
- /* We use the 20 byte dev->data
- * for our 8 byte filter buffer
- * to avoid allocating memory that
- * is tricky to free later */
- struct dev_mc_list *mc_list = net->mc_list;
- u32 crc_bits;
- int i;
-
- memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
- /* Build the multicast hash filter. */
- for (i = 0; i < net->mc_count; i++) {
- crc_bits =
- ether_crc(ETH_ALEN,
- mc_list->dmi_addr) >> 26;
- data->multi_filter[crc_bits >> 3] |=
- 1 << (crc_bits & 7);
- mc_list = mc_list->next;
- }
-
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
- AX_MCAST_FILTER_SIZE, data->multi_filter);
-
- rx_ctl |= 0x10;
- }
-
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
- struct usbnet *dev = netdev_priv(netdev);
- u16 res;
- u8 buf[1];
-
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
-
- return res & 0xffff;
-}
-
-static void ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- u16 res = val;
- u8 buf[1];
-
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
-}
-
-static int ax88172_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u8 mode;
-
- mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
- lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
- if (lpa & LPA_DUPLEX)
- mode |= AX_MEDIUM_FULL_DUPLEX;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-
- return 0;
-}
-
-static void ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt;
-
- if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
- wolinfo->supported = 0;
- wolinfo->wolopts = 0;
- return;
- }
- wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
- wolinfo->wolopts = 0;
- if (opt & AX_MONITOR_MODE) {
- if (opt & AX_MONITOR_LINK)
- wolinfo->wolopts |= WAKE_PHY;
- if (opt & AX_MONITOR_MAGIC)
- wolinfo->wolopts |= WAKE_MAGIC;
- }
-}
-
-static int ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt = 0;
- u8 buf[1];
-
- if (wolinfo->wolopts & WAKE_PHY)
- opt |= AX_MONITOR_LINK;
- if (wolinfo->wolopts & WAKE_MAGIC)
- opt |= AX_MONITOR_MAGIC;
- if (opt != 0)
- opt |= AX_MONITOR_MODE;
-
- if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
- opt, 0, 0, &buf) < 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int ax8817x_get_eeprom_len(struct net_device *net)
-{
- return AX_EEPROM_LEN;
-}
-
-static int ax8817x_get_eeprom(struct net_device *net,
- struct ethtool_eeprom *eeprom, u8 *data)
-{
- struct usbnet *dev = netdev_priv(net);
- u16 *ebuf = (u16 *)data;
- int i;
-
- /* Crude hack to ensure that we don't overwrite memory
- * if an odd length is supplied
- */
- if (eeprom->len % 2)
- return -EINVAL;
-
- eeprom->magic = AX_EEPROM_MAGIC;
-
- /* ax8817x returns 2 bytes from eeprom on read */
- for (i=0; i < eeprom->len / 2; i++) {
- if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
- eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
- return -EINVAL;
- }
- return 0;
-}
-
-static void ax8817x_get_drvinfo (struct net_device *net,
- struct ethtool_drvinfo *info)
-{
- /* Inherit standard device info */
- usbnet_get_drvinfo(net, info);
- info->eedump_len = 0x3e;
-}
-
-static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
- struct usbnet *dev = netdev_priv(net);
-
- return mii_ethtool_gset(&dev->mii,cmd);
-}
-
-static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
-{
- struct usbnet *dev = netdev_priv(net);
-
- return mii_ethtool_sset(&dev->mii,cmd);
-}
-
-/* We need to override some ethtool_ops so we require our
- own structure so we don't interfere with other usbnet
- devices that may be connected at the same time. */
-static struct ethtool_ops ax8817x_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
-};
-
-static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int ret = 0;
- void *buf;
- int i;
- unsigned long gpio_bits = dev->driver_info->data;
-
- get_endpoints(dev,intf);
-
- buf = kmalloc(ETH_ALEN, GFP_KERNEL);
- if(!buf) {
- ret = -ENOMEM;
- goto out1;
- }
-
- /* Toggle the GPIOs in a manufacturer/model specific way */
- for (i = 2; i >= 0; i--) {
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
- (gpio_bits >> (i * 8)) & 0xff, 0, 0,
- buf)) < 0)
- goto out2;
- msleep(5);
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf)) < 0) {
- dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
- goto out2;
- }
-
- /* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, 6, buf)) < 0) {
- dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
- goto out2;
- }
- memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
- dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
- goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x", ret);
- ret = -EIO;
- goto out2;
- }
-
- /* Initialize MII structure */
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
- dev->mii.phy_id_mask = 0x3f;
- dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = *((u8 *)buf + 1);
-
- dev->net->set_multicast_list = ax8817x_set_multicast;
- dev->net->ethtool_ops = &ax8817x_ethtool_ops;
-
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
- mii_nway_restart(&dev->mii);
-
- if (dev->driver_info->flags & FLAG_FRAMING_AX) {
- /* REVISIT: adjust hard_header_len too */
- dev->hard_mtu = 2048;
- }
-
- return 0;
-out2:
- kfree(buf);
-out1:
- return ret;
-}
-
-static struct ethtool_ops ax88772_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
-};
-
-static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
-{
- int ret;
- void *buf;
-
- get_endpoints(dev,intf);
-
- buf = kmalloc(6, GFP_KERNEL);
- if(!buf) {
- dbg ("Cannot allocate memory for buffer");
- ret = -ENOMEM;
- goto out1;
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
- 0x00B0, 0, 0, buf)) < 0)
- goto out2;
-
- msleep(5);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0x0001, 0, 0, buf)) < 0) {
- dbg("Select PHY #1 failed: %d", ret);
- goto out2;
- }
-
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD, 0, 0, buf)) < 0) {
- dbg("Failed to power down internal PHY: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR, 0, 0, buf)) < 0) {
- dbg("Failed to perform software reset: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Failed to set Internal/External PHY reset control: %d", ret);
- goto out2;
- }
-
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0000, 0, 0,
- buf)) < 0) {
- dbg("Failed to reset RX_CTL: %d", ret);
- goto out2;
- }
-
- /* Get the MAC address */
- memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)) < 0) {
- dbg("Failed to read MAC address: %d", ret);
- goto out2;
- }
- memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, buf)) < 0) {
- dbg("Enabling software MII failed: %d", ret);
- goto out2;
- }
-
- if (((ret =
- ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, 0x0010, 2, 2, buf)) < 0)
- || (*((u16 *)buf) != 0x003b)) {
- dbg("Read PHY register 2 must be 0x3b00: %d", ret);
- goto out2;
- }
-
- /* Initialize MII structure */
- dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
- dev->mii.phy_id_mask = 0xff;
- dev->mii.reg_num_mask = 0xff;
-
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf)) < 0) {
- dbg("Error reading PHY ID: %02x", ret);
- goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
- ret);
- ret = -EIO;
- goto out2;
- }
- dev->mii.phy_id = *((u8 *)buf + 1);
-
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Set external PHY reset pin level: %d", ret);
- goto out2;
- }
- msleep(150);
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPRL | AX_SWRESET_PRL, 0, 0, buf)) < 0) {
- dbg("Set Internal/External PHY reset control: %d", ret);
- goto out2;
- }
- msleep(150);
-
-
- dev->net->set_multicast_list = ax8817x_set_multicast;
- dev->net->ethtool_ops = &ax88772_ethtool_ops;
-
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_CSMA);
- mii_nway_restart(&dev->mii);
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
- dbg("Write medium mode register: %d", ret);
- goto out2;
- }
-
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
- dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
- goto out2;
- }
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
- dbg("Failed to set hardware MII: %02x", ret);
- goto out2;
- }
-
- /* Set RX_CTL to default values with 2k buffer, and enable cactus */
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
- buf)) < 0) {
- dbg("Reset RX_CTL failed: %d", ret);
- goto out2;
- }
-
- kfree(buf);
-
- return 0;
-
-out2:
- kfree(buf);
-out1:
- return ret;
-}
-
-static int ax88772_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
- u32 *header;
- char *packet;
- struct sk_buff *ax_skb;
- u16 size;
-
- header = (u32 *) skb->data;
- le32_to_cpus(header);
- packet = (char *)(header + 1);
-
- skb_pull(skb, 4);
-
- while (skb->len > 0) {
- if ((short)(*header & 0x0000ffff) !=
- ~((short)((*header & 0xffff0000) >> 16))) {
- devdbg(dev,"header length data is error");
- }
- /* get the packet length */
- size = (u16) (*header & 0x0000ffff);
-
- if ((skb->len) - ((size + 1) & 0xfffe) == 0)
- return 2;
- if (size > ETH_FRAME_LEN) {
- devdbg(dev,"invalid rx length %d", size);
- return 0;
- }
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (ax_skb) {
- ax_skb->len = size;
- ax_skb->data = packet;
- ax_skb->tail = packet + size;
- skb_return(dev, ax_skb);
- } else {
- return 0;
- }
-
- skb_pull(skb, (size + 1) & 0xfffe);
-
- if (skb->len == 0)
- break;
-
- header = (u32 *) skb->data;
- le32_to_cpus(header);
- packet = (char *)(header + 1);
- skb_pull(skb, 4);
- }
-
- if (skb->len < 0) {
- devdbg(dev,"invalid rx length %d", skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *ax88772_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
- unsigned flags)
-{
- int padlen;
- int headroom = skb_headroom(skb);
- int tailroom = skb_tailroom(skb);
- u32 *packet_len;
- u32 *padbytes_ptr;
-
- padlen = ((skb->len + 4) % 512) ? 0 : 4;
-
- if ((!skb_cloned(skb))
- && ((headroom + tailroom) >= (4 + padlen))) {
- if ((headroom < 4) || (tailroom < padlen)) {
- skb->data = memmove(skb->head + 4, skb->data, skb->len);
- skb->tail = skb->data + skb->len;
- }
- } else {
- struct sk_buff *skb2;
- skb2 = skb_copy_expand(skb, 4, padlen, flags);
- dev_kfree_skb_any(skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- packet_len = (u32 *) skb_push(skb, 4);
-
- packet_len = (u32 *) skb->data;
- *packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
-
- if ((skb->len % 512) == 0) {
- padbytes_ptr = (u32 *) skb->tail;
- *padbytes_ptr = 0xffff0000;
- skb_put(skb, padlen);
- }
- return skb;
-}
-
-static int ax88772_link_reset(struct usbnet *dev)
-{
- u16 lpa;
- u16 mode;
-
- mode = AX88772_MEDIUM_DEFAULT;
- lpa = ax8817x_mdio_read(dev->net, dev->mii.phy_id, MII_LPA);
-
- if ((lpa & LPA_DUPLEX) == 0)
- mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
- if ((lpa & LPA_100) == 0)
- mode &= ~AX88772_MEDIUM_100MB;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-
- return 0;
-}
-
-static const struct driver_info ax8817x_info = {
- .description = "ASIX AX8817x USB 2.0 Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x00130103,
-};
-
-static const struct driver_info dlink_dub_e100_info = {
- .description = "DLink DUB-E100 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x009f9d9f,
-};
-
-static const struct driver_info netgear_fa120_info = {
- .description = "Netgear FA-120 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x00130103,
-};
-
-static const struct driver_info hawking_uf200_info = {
- .description = "Hawking UF200 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
- .link_reset = ax88172_link_reset,
- .reset = ax88172_link_reset,
- .flags = FLAG_ETHER,
- .data = 0x001f1d1f,
-};
-
-static const struct driver_info ax88772_info = {
- .description = "ASIX AX88772 USB 2.0 Ethernet",
- .bind = ax88772_bind,
- .status = ax8817x_status,
- .link_reset = ax88772_link_reset,
- .reset = ax88772_link_reset,
- .flags = FLAG_ETHER | FLAG_FRAMING_AX,
- .rx_fixup = ax88772_rx_fixup,
- .tx_fixup = ax88772_tx_fixup,
- .data = 0x00130103,
-};
-
-#endif /* CONFIG_USB_AX8817X */
-
+EXPORT_SYMBOL_GPL(usbnet_skb_return);
/*-------------------------------------------------------------------------
@@ -1284,7 +502,7 @@ next_desc:
status = usb_driver_claim_interface (&usbnet_driver, info->data, dev);
if (status < 0)
return status;
- status = get_endpoints (dev, info->data);
+ status = usbnet_get_endpoints (dev, info->data);
if (status < 0) {
/* ensure immediate exit from usbnet_disconnect */
usb_set_intfdata(info->data, NULL);
@@ -1721,7 +939,7 @@ static int genelink_rx_fixup (struct usbnet *dev, struct sk_buff *skb)
// copy the packet data to the new skb
memcpy(skb_put(gl_skb, size), packet->packet_data, size);
- skb_return (dev, gl_skb);
+ usbnet_skb_return (dev, gl_skb);
}
// advance to the next packet
@@ -2616,7 +1834,7 @@ next_desc:
* bother to make it unique. Likewise there's no point in tracking
* of the CDC event notifications.
*/
- return get_endpoints (dev, intf);
+ return usbnet_get_endpoints (dev, intf);
bad_desc:
dev_info (&dev->udev->dev, "unsupported MDLM descriptors\n");
@@ -2694,7 +1912,7 @@ static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_hea
* NOTE: annoying asymmetry: if it's active, schedule_work() fails,
* but tasklet_schedule() doesn't. hope the failure is rare.
*/
-static void defer_kevent (struct usbnet *dev, int work)
+void usbnet_defer_kevent (struct usbnet *dev, int work)
{
set_bit (work, &dev->flags);
if (!schedule_work (&dev->kevent))
@@ -2702,6 +1920,7 @@ static void defer_kevent (struct usbnet *dev, int work)
else
devdbg (dev, "kevent %d scheduled", work);
}
+EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
/*-------------------------------------------------------------------------*/
@@ -2713,14 +1932,12 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags)
struct skb_data *entry;
int retval = 0;
unsigned long lockflags;
- size_t size;
+ size_t size = dev->rx_urb_size;
- size = max(dev->net->hard_header_len + dev->net->mtu,
- (unsigned)ETH_FRAME_LEN);
if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
if (netif_msg_rx_err (dev))
devdbg (dev, "no rx skb");
- defer_kevent (dev, EVENT_RX_MEMORY);
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
usb_free_urb (urb);
return;
}
@@ -2742,10 +1959,10 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, unsigned flags)
&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
case -EPIPE:
- defer_kevent (dev, EVENT_RX_HALT);
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
break;
case -ENOMEM:
- defer_kevent (dev, EVENT_RX_MEMORY);
+ usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
break;
case -ENODEV:
if (netif_msg_ifdown (dev))
@@ -2783,7 +2000,7 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
// else network stack removes extra byte if we forced a short packet
if (skb->len)
- skb_return (dev, skb);
+ usbnet_skb_return (dev, skb);
else {
if (netif_msg_rx_err (dev))
devdbg (dev, "drop");
@@ -2824,7 +2041,7 @@ static void rx_complete (struct urb *urb, struct pt_regs *regs)
// storm, recovering as needed.
case -EPIPE:
dev->stats.rx_errors++;
- defer_kevent (dev, EVENT_RX_HALT);
+ usbnet_defer_kevent (dev, EVENT_RX_HALT);
// FALLTHROUGH
// software-driven interface shutdown
@@ -3066,16 +2283,22 @@ done:
/*-------------------------------------------------------------------------*/
-static void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+/* ethtool methods; minidrivers may need to add some more, but
+ * they'll probably want to use this base set.
+ */
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
struct usbnet *dev = netdev_priv(net);
+ /* REVISIT don't always return "usbnet" */
strncpy (info->driver, driver_name, sizeof info->driver);
strncpy (info->version, DRIVER_VERSION, sizeof info->version);
strncpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
static u32 usbnet_get_link (struct net_device *net)
{
@@ -3089,32 +2312,29 @@ static u32 usbnet_get_link (struct net_device *net)
return 1;
}
-static u32 usbnet_get_msglevel (struct net_device *net)
+u32 usbnet_get_msglevel (struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
return dev->msg_enable;
}
+EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
-static void usbnet_set_msglevel (struct net_device *net, u32 level)
+void usbnet_set_msglevel (struct net_device *net, u32 level)
{
struct usbnet *dev = netdev_priv(net);
dev->msg_enable = level;
}
+EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
-{
-#ifdef NEED_MII
- {
- struct usbnet *dev = netdev_priv(net);
-
- if (dev->mii.mdio_read != NULL && dev->mii.mdio_write != NULL)
- return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
- }
-#endif
- return -EOPNOTSUPP;
-}
+/* drivers may override default ethtool_ops in their bind() routine */
+static struct ethtool_ops usbnet_ethtool_ops = {
+ .get_drvinfo = usbnet_get_drvinfo,
+ .get_link = usbnet_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+};
/*-------------------------------------------------------------------------*/
@@ -3209,7 +2429,7 @@ static void tx_complete (struct urb *urb, struct pt_regs *regs)
switch (urb->status) {
case -EPIPE:
- defer_kevent (dev, EVENT_TX_HALT);
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
break;
/* software-driven interface shutdown */
@@ -3339,7 +2559,7 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
case -EPIPE:
netif_stop_queue (net);
- defer_kevent (dev, EVENT_TX_HALT);
+ usbnet_defer_kevent (dev, EVENT_TX_HALT);
break;
default:
if (netif_msg_tx_err (dev))
@@ -3478,8 +2698,6 @@ EXPORT_SYMBOL_GPL(usbnet_disconnect);
/*-------------------------------------------------------------------------*/
-static struct ethtool_ops usbnet_ethtool_ops;
-
// precondition: never called in_interrupt
int
@@ -3530,8 +2748,11 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
dev->net = net;
strcpy (net->name, "usb%d");
memcpy (net->dev_addr, node_id, sizeof node_id);
- dev->hard_mtu = net->mtu + net->hard_header_len;
+ /* rx and tx sides can use different message sizes;
+ * bind() should set rx_urb_size in that case.
+ */
+ dev->hard_mtu = net->mtu + net->hard_header_len;
#if 0
// dma_supported() is deeply broken on almost all architectures
// possible with some EHCI controllers
@@ -3546,7 +2767,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
net->stop = usbnet_stop;
net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
net->tx_timeout = usbnet_tx_timeout;
- net->do_ioctl = usbnet_ioctl;
net->ethtool_ops = &usbnet_ethtool_ops;
// allow device-specific bind/init procedures
@@ -3563,8 +2783,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
/* maybe the remote can't receive an Ethernet MTU */
if (net->mtu > (dev->hard_mtu - net->hard_header_len))
net->mtu = dev->hard_mtu - net->hard_header_len;
- } else if (!info->in || info->out)
- status = get_endpoints (dev, udev);
+ } else if (!info->in || !info->out)
+ status = usbnet_get_endpoints (dev, udev);
else {
dev->in = usb_rcvbulkpipe (xdev, info->in);
dev->out = usb_sndbulkpipe (xdev, info->out);
@@ -3581,6 +2801,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
if (status < 0)
goto out1;
+ if (!dev->rx_urb_size)
+ dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
SET_NETDEV_DEV(net, &udev->dev);
@@ -3662,62 +2884,6 @@ EXPORT_SYMBOL_GPL(usbnet_resume);
static const struct usb_device_id products [] = {
-#ifdef CONFIG_USB_AX8817X
-{
- // Linksys USB200M
- USB_DEVICE (0x077b, 0x2226),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Netgear FA120
- USB_DEVICE (0x0846, 0x1040),
- .driver_info = (unsigned long) &netgear_fa120_info,
-}, {
- // DLink DUB-E100
- USB_DEVICE (0x2001, 0x1a00),
- .driver_info = (unsigned long) &dlink_dub_e100_info,
-}, {
- // Intellinet, ST Lab USB Ethernet
- USB_DEVICE (0x0b95, 0x1720),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Hawking UF200, TrendNet TU2-ET100
- USB_DEVICE (0x07b8, 0x420a),
- .driver_info = (unsigned long) &hawking_uf200_info,
-}, {
- // Billionton Systems, USB2AR
- USB_DEVICE (0x08dd, 0x90ff),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // ATEN UC210T
- USB_DEVICE (0x0557, 0x2009),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Buffalo LUA-U2-KTX
- USB_DEVICE (0x0411, 0x003d),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
- USB_DEVICE (0x6189, 0x182d),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // corega FEther USB2-TX
- USB_DEVICE (0x07aa, 0x0017),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // Surecom EP-1427X-2
- USB_DEVICE (0x1189, 0x0893),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // goodway corp usb gwusb2e
- USB_DEVICE (0x1631, 0x6200),
- .driver_info = (unsigned long) &ax8817x_info,
-}, {
- // ASIX AX88772 10/100
- USB_DEVICE (0x0b95, 0x7720),
- .driver_info = (unsigned long) &ax88772_info,
-},
-#endif
-
#ifdef CONFIG_USB_GENESYS
{
USB_DEVICE (0x05e3, 0x0502), // GL620USB-A
@@ -3881,14 +3047,6 @@ static struct usb_driver usbnet_driver = {
.resume = usbnet_resume,
};
-/* Default ethtool_ops assigned. Devices can override in their bind() routine */
-static struct ethtool_ops usbnet_ethtool_ops = {
- .get_drvinfo = usbnet_get_drvinfo,
- .get_link = usbnet_get_link,
- .get_msglevel = usbnet_get_msglevel,
- .set_msglevel = usbnet_set_msglevel,
-};
-
/*-------------------------------------------------------------------------*/
static int __init usbnet_init(void)
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index d903b46..21b5feb 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -44,6 +44,7 @@ struct usbnet {
unsigned long data [5];
u32 xid;
u32 hard_mtu; /* count any extra framing */
+ size_t rx_urb_size; /* size for rx urbs */
struct mii_if_info mii;
/* various kinds of pending driver work */
@@ -140,6 +141,13 @@ struct skb_data { /* skb->cb is one of these */
};
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern void usbnet_defer_kevent (struct usbnet *, int);
+extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
+
+extern u32 usbnet_get_msglevel (struct net_device *);
+extern void usbnet_set_msglevel (struct net_device *, u32);
+extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
/* messaging support includes the interface name, so it must not be
* used before it has one ... notably, in minidriver bind() calls.