diff options
Diffstat (limited to 'sound/pci')
| -rw-r--r-- | sound/pci/hda/patch_realtek.c | 20 |
1 files changed, 15 insertions, 5 deletions
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ea4200a..b34d244 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2414,8 +2414,8 @@ static struct hda_input_mux alc260_capture_source = { }, }; -/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack - * and the internal CD lines. +/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack, + * headphone jack and the internal CD lines. */ static struct hda_input_mux alc260_fujitsu_capture_source = { .num_items = 3, @@ -2790,16 +2790,26 @@ static hda_nid_t alc260_test_dac_nids[1] = { static hda_nid_t alc260_test_adc_nids[2] = { 0x04, 0x05, }; +/* This is a bit messy since the two input muxes in the ALC260 have slight + * variations in their signal assignments. The ideal way to deal with this + * is to extend alc_spec.input_mux to allow a different input MUX for each + * ADC. For the purposes of the test model it's sufficient to just list + * both options for affected signal indices. The separate input mux + * functionality only needs to be considered if a model comes along which + * actually uses signals 0x5, 0x6 and 0x7 for something which makes sense to + * record. + */ static struct hda_input_mux alc260_test_capture_source = { - .num_items = 7, + .num_items = 8, .items = { { "MIC1 pin", 0x0 }, { "MIC2 pin", 0x1 }, { "LINE1 pin", 0x2 }, { "LINE2 pin", 0x3 }, { "CD pin", 0x4 }, - { "LINE-OUT pin", 0x5 }, - { "HP-OUT pin", 0x6 }, + { "LINE-OUT pin (cap1), Mixer (cap2)", 0x5 }, + { "HP-OUT pin (cap1), LINE-OUT pin (cap2)", 0x6 }, + { "HP-OUT pin (cap2 only)", 0x7 }, }, }; static struct snd_kcontrol_new alc260_test_mixer[] = { |