1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
/*
* drivers/video/geode/video_cs5530.c
* -- CS5530 video device
*
* Copyright (C) 2005 Arcom Control Systems Ltd.
*
* Based on AMD's original 2.4 driver:
* Copyright (C) 2004 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/delay.h>
#include "geodefb.h"
#include "video_cs5530.h"
/*
* CS5530 PLL table. This maps pixclocks to the appropriate PLL register
* value.
*/
struct cs5530_pll_entry {
long pixclock; /* ps */
u32 pll_value;
};
static const struct cs5530_pll_entry cs5530_pll_table[] = {
{ 39721, 0x31C45801, }, /* 25.1750 MHz */
{ 35308, 0x20E36802, }, /* 28.3220 */
{ 31746, 0x33915801, }, /* 31.5000 */
{ 27777, 0x31EC4801, }, /* 36.0000 */
{ 26666, 0x21E22801, }, /* 37.5000 */
{ 25000, 0x33088801, }, /* 40.0000 */
{ 22271, 0x33E22801, }, /* 44.9000 */
{ 20202, 0x336C4801, }, /* 49.5000 */
{ 20000, 0x23088801, }, /* 50.0000 */
{ 19860, 0x23088801, }, /* 50.3500 */
{ 18518, 0x3708A801, }, /* 54.0000 */
{ 17777, 0x23E36802, }, /* 56.2500 */
{ 17733, 0x23E36802, }, /* 56.3916 */
{ 17653, 0x23E36802, }, /* 56.6444 */
{ 16949, 0x37C45801, }, /* 59.0000 */
{ 15873, 0x23EC4801, }, /* 63.0000 */
{ 15384, 0x37911801, }, /* 65.0000 */
{ 14814, 0x37963803, }, /* 67.5000 */
{ 14124, 0x37058803, }, /* 70.8000 */
{ 13888, 0x3710C805, }, /* 72.0000 */
{ 13333, 0x37E22801, }, /* 75.0000 */
{ 12698, 0x27915801, }, /* 78.7500 */
{ 12500, 0x37D8D802, }, /* 80.0000 */
{ 11135, 0x27588802, }, /* 89.8000 */
{ 10582, 0x27EC4802, }, /* 94.5000 */
{ 10101, 0x27AC6803, }, /* 99.0000 */
{ 10000, 0x27088801, }, /* 100.0000 */
{ 9259, 0x2710C805, }, /* 108.0000 */
{ 8888, 0x27E36802, }, /* 112.5000 */
{ 7692, 0x27C58803, }, /* 130.0000 */
{ 7407, 0x27316803, }, /* 135.0000 */
{ 6349, 0x2F915801, }, /* 157.5000 */
{ 6172, 0x2F08A801, }, /* 162.0000 */
{ 5714, 0x2FB11802, }, /* 175.0000 */
{ 5291, 0x2FEC4802, }, /* 189.0000 */
{ 4950, 0x2F963803, }, /* 202.0000 */
{ 4310, 0x2FB1B802, }, /* 232.0000 */
};
static void cs5530_set_dclk_frequency(struct fb_info *info)
{
struct geodefb_par *par = info->par;
int i;
u32 value;
long min, diff;
/* Search the table for the closest pixclock. */
value = cs5530_pll_table[0].pll_value;
min = cs5530_pll_table[0].pixclock - info->var.pixclock;
if (min < 0) min = -min;
for (i = 1; i < ARRAY_SIZE(cs5530_pll_table); i++) {
diff = cs5530_pll_table[i].pixclock - info->var.pixclock;
if (diff < 0L) diff = -diff;
if (diff < min) {
min = diff;
value = cs5530_pll_table[i].pll_value;
}
}
writel(value, par->vid_regs + CS5530_DOT_CLK_CONFIG);
writel(value | 0x80000100, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* set reset and bypass */
udelay(500); /* wait for PLL to settle */
writel(value & 0x7FFFFFFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear reset */
writel(value & 0x7FFFFEFF, par->vid_regs + CS5530_DOT_CLK_CONFIG); /* clear bypass */
}
static void cs5530_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 dcfg;
dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG);
/* Clear bits from existing mode. */
dcfg &= ~(CS5530_DCFG_CRT_SYNC_SKW_MASK | CS5530_DCFG_PWR_SEQ_DLY_MASK
| CS5530_DCFG_CRT_HSYNC_POL | CS5530_DCFG_CRT_VSYNC_POL
| CS5530_DCFG_FP_PWR_EN | CS5530_DCFG_FP_DATA_EN
| CS5530_DCFG_DAC_PWR_EN | CS5530_DCFG_VSYNC_EN
| CS5530_DCFG_HSYNC_EN);
/* Set default sync skew and power sequence delays. */
dcfg |= (CS5530_DCFG_CRT_SYNC_SKW_INIT | CS5530_DCFG_PWR_SEQ_DLY_INIT
| CS5530_DCFG_GV_PAL_BYP);
/* Enable DACs, hsync and vsync for CRTs */
if (par->enable_crt) {
dcfg |= CS5530_DCFG_DAC_PWR_EN;
dcfg |= CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN;
}
/* Enable panel power and data if using a flat panel. */
if (par->panel_x > 0) {
dcfg |= CS5530_DCFG_FP_PWR_EN;
dcfg |= CS5530_DCFG_FP_DATA_EN;
}
/* Sync polarities. */
if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
dcfg |= CS5530_DCFG_CRT_HSYNC_POL;
if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
dcfg |= CS5530_DCFG_CRT_VSYNC_POL;
writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG);
}
static int cs5530_blank_display(struct fb_info *info, int blank_mode)
{
struct geodefb_par *par = info->par;
u32 dcfg;
int blank, hsync, vsync;
switch (blank_mode) {
case FB_BLANK_UNBLANK:
blank = 0; hsync = 1; vsync = 1;
break;
case FB_BLANK_NORMAL:
blank = 1; hsync = 1; vsync = 1;
break;
case FB_BLANK_VSYNC_SUSPEND:
blank = 1; hsync = 1; vsync = 0;
break;
case FB_BLANK_HSYNC_SUSPEND:
blank = 1; hsync = 0; vsync = 1;
break;
case FB_BLANK_POWERDOWN:
blank = 1; hsync = 0; vsync = 0;
break;
default:
return -EINVAL;
}
dcfg = readl(par->vid_regs + CS5530_DISPLAY_CONFIG);
dcfg &= ~(CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN
| CS5530_DCFG_HSYNC_EN | CS5530_DCFG_VSYNC_EN
| CS5530_DCFG_FP_DATA_EN | CS5530_DCFG_FP_PWR_EN);
if (par->enable_crt) {
if (!blank)
dcfg |= CS5530_DCFG_DAC_BL_EN | CS5530_DCFG_DAC_PWR_EN;
if (hsync)
dcfg |= CS5530_DCFG_HSYNC_EN;
if (vsync)
dcfg |= CS5530_DCFG_VSYNC_EN;
}
if (par->panel_x > 0) {
if (!blank)
dcfg |= CS5530_DCFG_FP_DATA_EN;
if (hsync && vsync)
dcfg |= CS5530_DCFG_FP_PWR_EN;
}
writel(dcfg, par->vid_regs + CS5530_DISPLAY_CONFIG);
return 0;
}
struct geode_vid_ops cs5530_vid_ops = {
.set_dclk = cs5530_set_dclk_frequency,
.configure_display = cs5530_configure_display,
.blank_display = cs5530_blank_display,
};
|
