aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOndrej Zary <linux@rainbow-software.org>2009-06-27 16:26:35 +0200
committerTakashi Iwai <tiwai@suse.de>2009-06-29 08:06:57 +0200
commit74a0094cd9d030d7a684e6ce1cbd1658eb63bd7d (patch)
tree8a57c4baf526995554a37625c10537d41a9536f7
parentc2a30d711852e4f39c8a79135b3caa701f7a8e02 (diff)
downloadkernel_samsung_tuna-74a0094cd9d030d7a684e6ce1cbd1658eb63bd7d.zip
kernel_samsung_tuna-74a0094cd9d030d7a684e6ce1cbd1658eb63bd7d.tar.gz
kernel_samsung_tuna-74a0094cd9d030d7a684e6ce1cbd1658eb63bd7d.tar.bz2
ALSA: cmi8330: revert comments about AD1848 back
In ALSA 1.0.20, the comments were changed to say CMI8330 instead of AD1848. The CMI8330 chip includes two codecs - AD1848 and SB16, so the comments were correct and are misleading now. Revert them back. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-rw-r--r--sound/isa/cmi8330.c8
1 files changed, 4 insertions, 4 deletions
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index 3ee0269..d510c76 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -35,7 +35,7 @@
*
* This card has two mixers and two PCM devices. I've cheesed it such
* that recording and playback can be done through the same device.
- * The driver "magically" routes the capturing to the CMI8330 codec,
+ * The driver "magically" routes the capturing to the AD1848 codec,
* and playback to the SB16 codec. This allows for full-duplex mode
* to some extent.
* The utilities in alsa-utils are aware of both devices, so passing
@@ -345,7 +345,7 @@ static int __devinit snd_cmi8330_pnp(int dev, struct snd_cmi8330 *acard,
err = pnp_activate_dev(pdev);
if (err < 0) {
- snd_printk(KERN_ERR "CMI8330/C3D PnP configure failure\n");
+ snd_printk(KERN_ERR "CMI8330/C3D (AD1848) PnP configure failure\n");
return -EBUSY;
}
wssport[dev] = pnp_port_start(pdev, 0);
@@ -527,11 +527,11 @@ static int __devinit snd_cmi8330_probe(struct snd_card *card, int dev)
wssdma[dev], -1,
WSS_HW_DETECT, 0, &acard->wss);
if (err < 0) {
- snd_printk(KERN_ERR PFX "(CMI8330) device busy??\n");
+ snd_printk(KERN_ERR PFX "(AD1848) device busy??\n");
return err;
}
if (acard->wss->hardware != WSS_HW_CMI8330) {
- snd_printk(KERN_ERR PFX "(CMI8330) not found during probe\n");
+ snd_printk(KERN_ERR PFX "(AD1848) not found during probe\n");
return -ENODEV;
}