Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 133 insertions, 0 deletions

diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
new file mode 100644
index 0000000..5640491
--- /dev/null
+++ b/Documentation/i2c/porting-clients
@@ -0,0 +1,133 @@
+Revision 4, 2004-03-30
+Jean Delvare <khali@linux-fr.org>
+Greg KH <greg@kroah.com>
+
+This is a guide on how to convert I2C chip drivers from Linux 2.4 to
+Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
+Then I converted a driver myself (lm83) and updated this document.
+
+There are two sets of points below. The first set concerns technical
+changes. The second set concerns coding policy. Both are mandatory.
+
+Although reading this guide will help you porting drivers, I suggest
+you keep an eye on an already ported driver while porting your own
+driver. This will help you a lot understanding what this guide
+exactly means. Choose the chip driver that is the more similar to
+yours for best results.
+
+Technical changes:
+
+* [Includes] Get rid of "version.h". Replace <linux/i2c-proc.h> with
+  <linux/i2c-sensor.h>. Includes typically look like that:
+  #include <linux/module.h>
+  #include <linux/init.h>
+  #include <linux/slab.h>
+  #include <linux/i2c.h>
+  #include <linux/i2c-sensor.h>
+  #include <linux/i2c-vid.h>	/* if you need VRM support */
+  #include <asm/io.h>		/* if you have I/O operations */
+  Please respect this inclusion order. Some extra headers may be
+  required for a given driver (e.g. "lm75.h").
+
+* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, SENSORS_ISA_END
+  becomes I2C_CLIENT_ISA_END.
+
+* [Client data] Get rid of sysctl_id. Try using standard names for
+  register values (for example, temp_os becomes temp_max). You're
+  still relatively free here, but you *have* to follow the standard
+  names for sysfs files (see the Sysctl section below).
+
+* [Function prototypes] The detect functions loses its flags
+  parameter. Sysctl (e.g. lm75_temp) and miscellaneous functions
+  are off the list of prototypes. This usually leaves five
+  prototypes:
+  static int lm75_attach_adapter(struct i2c_adapter *adapter);
+  static int lm75_detect(struct i2c_adapter *adapter, int address,
+      int kind);
+  static void lm75_init_client(struct i2c_client *client);
+  static int lm75_detach_client(struct i2c_client *client);
+  static void lm75_update_client(struct i2c_client *client);
+
+* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
+  and functions). Instead, you have to define show and set functions for
+  each sysfs file. Only define set for writable values. Take a look at an
+  existing 2.6 driver for details (lm78 for example). Don't forget
+  to define the attributes for each file (this is that step that
+  links callback functions). Use the file names specified in
+  Documentation/i2c/sysfs-interface for the individual files. Also
+  convert the units these files read and write to the specified ones.
+  If you need to add a new type of file, please discuss it on the
+  sensors mailing list <sensors@stimpy.netroedge.com> by providing a
+  patch to the Documentation/i2c/sysfs-interface file.
+
+* [Attach] For I2C drivers, the attach function should make sure
+  that the adapter's class has I2C_CLASS_HWMON, using the
+  following construct:
+  if (!(adapter->class & I2C_CLASS_HWMON))
+          return 0;
+  ISA-only drivers of course don't need this.
+
+* [Detect] As mentioned earlier, the flags parameter is gone.
+  The type_name and client_name strings are replaced by a single
+  name string, which will be filled with a lowercase, short string
+  (typically the driver name, e.g. "lm75").
+  In i2c-only drivers, drop the i2c_is_isa_adapter check, it's
+  useless.
+  The errorN labels are reduced to the number needed. If that number
+  is 2 (i2c-only drivers), it is advised that the labels are named
+  exit and exit_free. For i2c+isa drivers, labels should be named
+  ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
+  jumping to error labels. By the way, labels should be left-aligned.
+  Use memset to fill the client and data area with 0x00.
+  Use i2c_set_clientdata to set the client data (as opposed to
+  a direct access to client->data).
+  Use strlcpy instead of strcpy to copy the client name.
+  Replace the sysctl directory registration by calls to
+  device_create_file. Move the driver initialization before any
+  sysfs file creation.
+  Drop client->id.
+
+* [Init] Limits must not be set by the driver (can be done later in
+  user-space). Chip should not be reset default (although a module
+  parameter may be used to force is), and initialization should be
+  limited to the strictly necessary steps.
+
+* [Detach] Get rid of data, remove the call to
+  i2c_deregister_entry.
+
+* [Update] Don't access client->data directly, use
+  i2c_get_clientdata(client) instead.
+
+* [Interface] Init function should not print anything. Make sure
+  there is a MODULE_LICENSE() line, at the bottom of the file
+  (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this order).
+
+Coding policy:
+
+* [Copyright] Use (C), not (c), for copyright.
+
+* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
+  can. Calls to printk/pr_debug for debugging purposes are replaced
+  by calls to dev_dbg. Here is an example on how to call it (taken
+  from lm75_detect):
+  dev_dbg(&client->dev, "Starting lm75 update\n");
+  Replace other printk calls with the dev_info, dev_err or dev_warn
+  function, as appropriate.
+
+* [Constants] Constants defines (registers, conversions, initial
+  values) should be aligned. This greatly improves readability.
+  Same goes for variables declarations. Alignments are achieved by the
+  means of tabs, not spaces. Remember that tabs are set to 8 in the
+  Linux kernel code.
+
+* [Structure definition] The name field should be standardized. All
+  lowercase and as simple as the driver name itself (e.g. "lm75").
+
+* [Layout] Avoid extra empty lines between comments and what they
+  comment. Respect the coding style (see Documentation/CodingStyle),
+  in particular when it comes to placing curly braces.
+
+* [Comments] Make sure that no comment refers to a file that isn't
+  part of the Linux source tree (typically doc/chips/<chip name>),
+  and that remaining comments still match the code. Merging comment
+  lines when possible is encouraged.