Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2023 insertions, 0 deletions

diff --git a/Documentation/scsi/ChangeLog.1992-1997 b/Documentation/scsi/ChangeLog.1992-1997
new file mode 100644
index 0000000..dc88ee2
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.1992-1997
@@ -0,0 +1,2023 @@
+Sat Jan 18 15:51:45 1997  Richard Henderson  <rth@tamu.edu>
+
+	* Don't play with usage_count directly, instead hand around
+	the module header and use the module macros.
+
+Fri May 17 00:00:00 1996  Leonard N. Zubkoff <lnz@dandelion.com>
+
+	* BusLogic Driver Version 2.0.3 Released.
+
+Tue Apr 16 21:00:00 1996  Leonard N. Zubkoff <lnz@dandelion.com>
+
+	* BusLogic Driver Version 1.3.2 Released.
+
+Sun Dec 31 23:26:00 1995  Leonard N. Zubkoff <lnz@dandelion.com>
+
+	* BusLogic Driver Version 1.3.1 Released.
+
+Fri Nov 10 15:29:49 1995  Leonard N. Zubkoff <lnz@dandelion.com>
+
+	* Released new BusLogic driver.
+
+Wed Aug  9 22:37:04 1995  Andries Brouwer  <aeb@cwi.nl>
+
+	As a preparation for new device code, separated the various
+	functions the request->dev field had into the device proper,
+	request->rq_dev and a status field request->rq_status.
+
+	The 2nd argument of bios_param is now a kdev_t.
+
+Wed Jul 19 10:43:15 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+        * scsi.c (scsi_proc_info): /proc/scsi/scsi now also lists all
+	attached devices.
+
+	* scsi_proc.c (proc_print_scsidevice): Added. Used by scsi.c and
+	eata_dma_proc.c to produce some device info for /proc/scsi.
+
+	* eata_dma.c (eata_queue)(eata_int_handler)(eata_scsi_done):
+	Changed handling of internal SCSI commands send to the HBA.
+
+
+Wed Jul 19 10:09:17 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.11 released.
+
+	* eata_dma.c (eata_queue)(eata_int_handler): Added code to do
+	command latency measurements if requested by root through
+	/proc/scsi interface.
+	Throughout Use HZ constant for time references.
+
+	* eata_pio.c: Use HZ constant for time references.
+
+	* aic7xxx.c, aic7xxx.h, aic7xxx_asm.c: Changed copyright from BSD
+	to GNU style.
+
+	* scsi.h: Added READ_12 command opcode constant
+
+Wed Jul 19 09:25:30 1995  Michael Neuffer <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.10 released.
+
+	* scsi_proc.c (dispatch_scsi_info): Removed unused variable.
+
+Wed Jul 19 09:25:30 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.9 released.
+
+	* scsi.c Blacklist concept expanded to 'support' more device
+	deficiencies. blacklist[] renamed to device_list[]
+	(scan_scsis): Code cleanup.
+
+	* scsi_debug.c (scsi_debug_proc_info): Added support to control
+	device lockup simulation via /proc/scsi interface.
+
+
+Wed Jul 19 09:22:34 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.7 released.
+
+	* scsi_proc.c: Fixed a number of bugs in directory handling
+
+Wed Jul 19 09:18:28 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.5 released.
+
+	* Native wide, multichannel and /proc/scsi support now in official
+	kernel distribution.
+
+        * scsi.c/h, hosts.c/h et al reindented to increase readability
+	(especially on 80 column wide terminals).
+
+	* scsi.c, scsi_proc.c, ../../fs/proc/inode.c: Added
+	/proc/scsi/scsi which allows root to scan for hotplugged devices.
+
+	* scsi.c (scsi_proc_info): Added, to support /proc/scsi/scsi.
+	(scan_scsis): Added some 'spaghetti' code to allow scanning for
+	single devices.
+	
+
+Thu Jun 20 15:20:27 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+        * proc.c: Renamed to scsi_proc.c
+
+Mon Jun 12 20:32:45 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* Linux 1.3.0 released.
+
+Mon May 15 19:33:14 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* scsi.c: Added native multichannel and wide scsi support.
+
+	* proc.c (dispatch_scsi_info) (build_proc_dir_hba_entries):
+	Updated /proc/scsi interface.
+
+Thu May  4 17:58:48 1995  Michael Neuffer  <neuffer@goofy.zdv.uni-mainz.de>
+
+	* sd.c (requeue_sd_request): Zero out the scatterlist only if
+	scsi_malloc returned memory for it.
+
+	* eata_dma.c (register_HBA) (eata_queue): Add support for
+	large scatter/gather tables and set use_clustering accordingly
+
+	* hosts.c: Make use_clustering changeable in the Scsi_Host structure.
+
+Wed Apr 12 15:25:52 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.2.5 released.
+
+	* buslogic.c: Update to version 1.15 (From Leonard N. Zubkoff).
+	Fixed interrupt routine to avoid races when handling multiple
+	complete commands per interrupt.  Seems to come up with faster
+	cards.
+
+	* eata_dma.c: Update to 2.3.5r. Modularize. Improved error handling
+        throughout and fixed bug interrupt routine which resulted in shifted
+        status bytes. Added blink LED state checks for ISA and EISA HBAs.
+        Memory management bug seems to have disappeared ==> increasing
+        C_P_L_CURRENT_MAX to 16 for now. Decreasing C_P_L_DIV to 3 for
+        performance reasons.
+
+	* scsi.c: If we get a FMK, EOM, or ILI when attempting to scan
+	the bus, assume that it was just noise on the bus, and ignore
+	the device.
+
+	* scsi.h: Update and add a bunch of missing commands which we
+	were never using.
+
+	* sd.c: Use restore_flags in do_sd_request - this may result in
+	latency conditions, but it gets rid of races and crashes.
+	Do not save flags again when searching for a second command to
+	queue.
+
+	* st.c: Use bytes, not STP->buffer->buffer_size when reading
+	from tape.
+
+
+Tue Apr  4 09:42:08 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.2.4 released.
+
+	* st.c: Fix typo - restoring wrong flags.
+
+Wed Mar 29 06:55:12 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.2.3 released.
+
+	* st.c: Perform some waiting operations with interrupts off.
+	Is this correct???
+
+Wed Mar 22 10:34:26 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.2.2 released.
+
+	* aha152x.c: Modularize.  Add support for PCMCIA.
+
+	* eata.c: Update to version 2.0.  Fixed bug preventing media
+	detection.  If scsi_register_host returns NULL, fail gracefully.
+
+	* scsi.c: Detect as NEC (for photo-cd purposes) for the 84
+	and 25 models as "NEC_OLDCDR".
+
+	* scsi.h: Add define for NEC_OLDCDR
+
+	* sr.c: Add handling for NEC_OLDCDR.  Treat as unknown.
+
+	* u14-34f.c: Update to version 2.0.  Fixed same bug as in
+	eata.c.
+
+
+Mon Mar  6 11:11:20 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.2.0 released.  Yeah!!!
+
+	* Minor spelling/punctuation changes throughout.  Nothing
+	substantive.
+
+Mon Feb 20 21:33:03 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.95 released.
+
+	* qlogic.c: Update to version 0.41.
+
+	* seagate.c: Change some message to be more descriptive about what
+	we detected.
+
+	* sr.c: spelling/whitespace changes.
+
+Mon Feb 20 21:33:03 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.94 released.
+
+Mon Feb 20 08:57:17 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.93 released.
+
+	* hosts.h: Change io_port to long int from short.
+
+ 	* 53c7,8xx.c: crash on AEN fixed, SCSI reset is no longer a NOP,
+ 	  NULL pointer panic on odd UDCs fixed, two bugs in diagnostic output
+ 	  fixed, should initialize correctly if left running, now loadable,
+  	  new memory allocation, extraneous diagnostic output suppressed,
+ 	  splx() replaced with save/restore flags. [ Drew ]
+
+	* hosts.c, hosts.h, scsi_ioctl.c, sd.c, sd_ioctl.c, sg.c, sr.c,
+	sr_ioctl.c: Add special junk at end that Emacs will use for
+	formatting the file.
+
+	* qlogic.c: Update to v0.40a.  Improve parity handling.
+
+	* scsi.c: Add Hitachi DK312C to blacklist.  Change "};" to "}" in
+	many places.  Use scsi_init_malloc to get command block - may
+	need this to be dma compatible for some host adapters.
+	Restore interrupts after unregistering a host.
+
+	* sd.c: Use sti instead of restore flags - causes latency problems.
+
+	* seagate.c: Use controller_type to determine string used when
+	registering irq.
+
+	* sr.c: More photo-cd hacks to make sure we get the xa stuff right.
+	* sr.h, sr.c: Change is_xa to xa_flags field.
+
+	* st.c: Disable retries for write operations.
+
+Wed Feb 15 10:52:56 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.92 released.
+
+	* eata.c: Update to 1.17.
+
+	* eata_dma.c: Update to 2.31a. Add more support for /proc/scsi.
+        Continuing modularization. Less crashes because of the bug in the
+        memory management ==> increase C_P_L_CURRENT_MAX to 10
+        and decrease C_P_L_DIV to 4.
+
+	* hosts.c: If we remove last host registered, reuse host number.
+	When freeing memory from host being deregistered, free extra_bytes
+	too.
+
+	* scsi.c (scan_scsis): memset(SDpnt, 0) and set SCmd.device to SDpnt.
+	Change memory allocation to work around bugs in __get_dma_pages.
+	Do not free host if usage count is not zero (for modules).
+
+	* sr_ioctl.c: Increase IOCTL_TIMEOUT to 3000.
+
+	* st.c: Allow for ST_EXTRA_DEVS in st data structures.
+
+	* u14-34f.c: Update to 1.17.
+
+Thu Feb  9 10:11:16 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.91 released.
+
+	* eata.c: Update to 1.16.  Use wish_block instead of host->block.
+
+	* hosts.c: Initialize wish_block to 0.
+
+	* hosts.h: Add wish_block.
+
+	* scsi.c: Use wish_block as indicator that the host should be added
+	to block list.
+
+	* sg.c: Add SG_EXTRA_DEVS to number of slots.
+
+	* u14-34f.c: Use wish_block.
+
+Tue Feb  7 11:46:04 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.90 released.
+
+	* eata.c: Change naming from eata_* to eata2x_*.  Now at vers 1.15.
+	Update interrupt handler to take pt_regs as arg.  Allow blocking
+	even if loaded as module.  Initialize target_time_out array.
+	Do not put sti(); in timing loop.
+
+	* hosts.c: Do not reuse host numbers.
+	Use scsi_make_blocked_list to generate blocking list.
+
+	* script_asm.pl:  Beats me.  Don't know perl.  Something to do with
+	phase index.
+
+	* scsi.c (scsi_make_blocked_list): New function - code copied from
+	hosts.c.
+
+	* scsi.c: Update code to disable photo CD for Toshiba cdroms.
+	Use just manufacturer name, not model number.
+
+	* sr.c: Fix setting density for Toshiba drives.
+
+	* u14-34f.c: Clear target_time_out array during reset.
+
+Wed Feb  1 09:20:45 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.89 released.
+
+	* Makefile, u14-34f.c: Modularize.
+
+	* Makefile, eata.c: Modularize.  Now version 1.14
+
+	* NCR5380.c: Update interrupt handler with new arglist.  Minor
+	cleanups.
+
+	* eata_dma.c: Begin to modularize.  Add hooks for /proc/scsi.
+	New version 2.3.0a. Add code in interrupt handler to allow
+        certain CDROM drivers to be detected which return a
+        CHECK_CONDITION during SCSI bus scan. Add opcode check to get
+        all DATA IN and DATA OUT phases right. Utilize HBA_interpret flag.
+	Improvements in HBA identification. Various other minor stuff.
+
+	* hosts.c: Initialize ->dma_channel and ->io_port when registering
+	a new host.
+
+	* qlogic.c: Modularize and add PCMCIA support.
+
+	* scsi.c: Add Hitachi to blacklist.
+
+	* scsi.c: Change default to no lun scan (too many problem devices).
+
+	* scsi.h: Define QUEUE_FULL condition.
+
+	* sd.c: Do not check for non-existent partition until after
+	new media check.
+
+	* sg.c: Undo previous change which was wrong.
+
+	* sr_ioctl.c: Increase IOCTL_TIMEOUT to 2000.
+
+	* st.c: Patches from Kai - improve filemark handling.
+
+Tue Jan 31 17:32:12 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.88 released.
+
+	* Throughout - spelling/grammar fixups.
+
+	* scsi.c: Make sure that all buffers are 16 byte aligned - some
+	drivers (buslogic) need this.
+
+	* scsi.c (scan_scsis): Remove message printed.
+
+	* scsi.c (scsi_init): Move message here.
+
+Mon Jan 30 06:40:25 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.87 released.
+
+	* sr.c: Photo-cd related changes. (Gerd Knorr??).
+
+	* st.c: Changes from Kai related to EOM detection.
+
+Mon Jan 23 23:53:10 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.86 released.
+
+	* 53c7,8xx.h: Change SG size to 127.
+
+	* eata_dma: Update to version 2.10i. Remove bug in the registration
+        of multiple HBAs and channels. Minor other improvements and stylistic
+        changes.
+
+	* scsi.c: Test for Toshiba XM-3401TA and exclude from detection
+	as toshiba drive - photo cd does not work with this drive.
+
+	* sr.c:  Update photocd code.
+
+Mon Jan 23 23:53:10 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.85 released.
+
+	* st.c, st_ioctl.c, sg.c, sd_ioctl.c, scsi_ioctl.c, hosts.c:
+	include linux/mm.h
+
+	* qlogic.c, buslogic.c, aha1542.c: Include linux/module.h.
+
+Sun Jan 22 22:08:46 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.84 released.
+
+	* Makefile: Support for loadable QLOGIC boards.
+
+	* aha152x.c: Update to version 1.8 from Juergen.
+
+	* eata_dma.c: Update from Michael Neuffer.
+        Remove hard limit of 2 commands per lun and make it better
+        configurable. Improvements in HBA identification.
+
+	* in2000.c: Fix biosparam to support large disks.
+
+	* qlogic.c: Minor changes (change sti -> restore_flags).
+
+Wed Jan 18 23:33:09 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.83 released.
+
+	* aha1542.c(aha1542_intr_handle): Use arguments handed down to find
+	which irq.
+
+	* buslogic.c: Likewise.
+
+	* eata_dma.c: Use min of 2 cmd_per_lun for OCS_enabled boards.
+
+	* scsi.c: Make RECOVERED_ERROR a SUGGEST_IS_OK.
+
+	* sd.c: Fail if we are opening a non-existent partition.
+
+	* sr.c: Bump SR_TIMEOUT to 15000.
+	Do not probe for media size at boot time(hard on changers).
+	Flag device as needing sector size instead.
+
+	* sr_ioctl.c: Remove CDROMMULTISESSION_SYS ioctl.
+
+	* ultrastor.c: Fix bug in call to ultrastor_interrupt (wrong #args).
+
+Mon Jan 16 07:18:23 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.82 released.
+
+	Throughout.
+	- Change all interrupt handlers to accept new calling convention.
+	In particular, we now receive the irq number as one of the arguments.
+
+	* More minor spelling corrections in some of the new files.
+
+	* aha1542.c, buslogic.c: Clean up interrupt handler a little now
+	that we receive the irq as an arg.
+
+	* aha274x.c: s/snarf_region/request_region/
+
+	* eata.c: Update to version 1.12.   Fix some comments and display a
+	message if we cannot reserve the port addresses.
+
+	* u14-34f.c: Update to version 1.13.   Fix some comments and display a
+	message if we cannot reserve the port addresses.
+
+	* eata_dma.c: Define get_board_data function (send INQUIRY command).
+	Use to improve detection of variants of different DPT boards.  Change
+	version subnumber to "0g".
+
+	* fdomain.c:  Update to version 5.26.  Improve detection of some boards
+	repackaged by IBM.
+
+	* scsi.c (scsi_register_host): Change "name" to const char *.
+
+	* sr.c: Fix problem in set mode command for Toshiba drives.
+
+	* sr.c: Fix typo from patch 81.
+
+Fri Jan 13 12:54:46 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.81 released.  Codefreeze for 1.2 release announced.
+
+	Big changes here.
+
+	* eata_dma.*: New files from Michael Neuffer.
+	(neuffer@goofy.zdv.uni-mainz.de).  Should support
+	all eata/dpt cards.
+
+	* hosts.c, Makefile: Add eata_dma.
+
+	* README.st: Document MTEOM.
+
+	Patches from me (ERY) to finish support for low-level loadable scsi.
+	It now works, and is actually useful.
+
+	* Throughout - add new argument to scsi_init_malloc that takes an
+	additional parameter.  This is used as a priority to kmalloc,
+	and you can specify the GFP_DMA flag if you need DMA-able memory.
+
+	* Makefile: For source files that are loadable, always add name
+	to SCSI_SRCS.  Fill in modules: target.
+
+	* hosts.c:  Change next_host to next_scsi_host, and make global.
+	Print hosts after we have identified all of them.  Use info()
+	function if present, otherwise use name field.
+
+	* hosts.h: Change attach function to return int, not void.
+	Define number of device slots to allow for loadable devices.
+	Define tags to tell scsi module code what type of module we
+	are loading.
+
+	* scsi.c: Fix scan_scsis so that it can be run by a user process.
+	Do not use waiting loops - use up and down mechanism as long
+	as current != task[0].
+
+	* scsi.c(scan_scsis): Do not use stack variables for I/O - this
+	could be > 16Mb if we are loading a module at runtime (i.e. use
+	scsi_init_malloc to get some memory we know will be safe).
+
+	* scsi.c: Change dma freelist to be a set of pages.  This allows
+	us to dynamically adjust the size of the list by adding more pages
+	to the pagelist.  Fix scsi_malloc and scsi_free accordingly.
+
+	* scsi_module.c: Fix include.
+
+	* sd.c: Declare detach function.  Increment/decrement module usage
+	count as required.  Fix init functions to allow loaded devices.
+	Revalidate all new disks so we get the partition tables.  Define
+	detach function.
+
+	* sr.c: Likewise.
+
+	* sg.c: Declare detach function.  Allow attachment of devices on
+	loaded drivers.
+
+	* st.c: Declare detach function.  Increment/decrement module usage
+	count as required.
+
+Tue Jan 10 10:09:58 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.79 released.
+
+	Patch from some undetermined individual who needs to get a life :-).
+
+	* sr.c: Attacked by spelling bee...
+
+	Patches from Gerd Knorr:
+
+	* sr.c: make printk messages for photoCD a little more informative.
+
+	* sr_ioctl.c: Fix CDROMMULTISESSION_SYS ioctl.
+
+Mon Jan  9 10:01:37 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.78 released.
+
+	* Makefile: Add empty modules: target.
+
+	* Wheee.  Now change register_iomem to request_region.
+
+	* in2000.c: Bugfix - apparently this is the fix that we have
+	all been waiting for.  It fixes a problem whereby the driver
+	is not stable under heavy load.  Race condition and all that.
+	Patch from Peter Lu.
+
+Wed Jan  4 21:17:40 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.77 released.
+
+	* 53c7,8xx.c: Fix from Linus - emulate splx.
+
+	Throughout:
+
+		Change "snarf_region" with "register_iomem".
+
+	* scsi_module.c: New file.  Contains support for low-level loadable
+	  scsi drivers. [ERY].
+
+	* sd.c: More s/int/long/ changes.
+
+	* seagate.c: Explicitly include linux/config.h
+
+	* sg.c: Increment/decrement module usage count on open/close.
+
+	* sg.c: Be a bit more careful about the user not supplying enough
+	  information for a valid command.  Pass correct size down to
+	  scsi_do_cmd.
+
+	* sr.c:  More changes for Photo-CD.  This apparently breaks NEC drives.
+
+	* sr_ioctl.c:  Support CDROMMULTISESSION ioctl.
+
+
+Sun Jan  1 19:55:21 1995  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.76 released.
+
+	* constants.c: Add type cast in switch statement.
+
+	* scsi.c (scsi_free): Change datatype of "offset" to long.
+	  (scsi_malloc): Change a few more variables to long.  Who
+	  did this and why was it important?  64 bit machines?
+
+
+	Lots of changes to use save_state/restore_state instead of cli/sti.
+	Files changed include:
+
+	* aha1542.c:
+	* aha1740.c:
+	* buslogic.c:
+	* in2000.c:
+	* scsi.c:
+	* scsi_debug.c:
+	* sd.c:
+	* sr.c:
+	* st.c:
+
+Wed Dec 28 16:38:29 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.75 released.
+
+	* buslogic.c: Spelling fix.
+
+	* scsi.c: Add HP C1790A and C2500A scanjet to blacklist.
+
+	* scsi.c: Spelling fixup.
+
+	* sd.c: Add support for sd_hardsizes (hard sector sizes).
+
+	* ultrastor.c: Use save_flags/restore_flags instead of cli/sti.
+
+Fri Dec 23 13:36:25 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.74 released.
+
+	* README.st: Update from Kai Makisara.
+
+	* eata.c: New version from Dario - version 1.11.
+	  use scsicam bios_param routine.  Add support for 2011
+	  and 2021 boards.
+
+	* hosts.c: Add support for blocking.  Linked list automatically
+	  generated when shpnt->block is set.
+
+	* scsi.c: Add sankyo & HP scanjet to blacklist.  Add support for
+	  kicking things loose when we deadlock.
+
+	* scsi.c: Recognize scanners and processors in scan_scsis.
+
+	* scsi_ioctl.h: Increase timeout to 9 seconds.
+
+	* st.c: New version from Kai - add better support for backspace.
+
+	* u14-34f.c: New version from Dario.  Supports blocking.
+
+Wed Dec 14 14:46:30 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.73 released.
+
+	* buslogic.c: Update from Dave Gentzel.  Version 1.14.
+	  Add module related stuff.   More fault tolerant if out of
+	  DMA memory.
+
+	* fdomain.c: New version from Rik Faith - version 5.22.  Add support
+	  for ISA-200S SCSI adapter.
+
+	* hosts.c: Spelling.
+
+	* qlogic.c: Update to version 0.38a.  Add more support for PCMCIA.
+
+	* scsi.c: Mask device type with 0x1f during scan_scsis.
+	  Add support for deadlocking, err, make that getting out of
+	  deadlock situations that are created when we allow the user
+	  to limit requests to one host adapter at a time.
+
+	* scsi.c: Bugfix - pass pid, not SCpnt as second arg to
+	  scsi_times_out.
+
+	* scsi.c: Restore interrupt state to previous value instead of using
+	  cli/sti pairs.
+
+	* scsi.c: Add a bunch of module stuff (all commented out for now).
+
+	* scsi.c: Clean up scsi_dump_status.
+
+Tue Dec  6 12:34:20 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.72 released.
+
+	* sg.c: Bugfix - always use sg_free, since we might have big buff.
+
+Fri Dec  2 11:24:53 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.71 released.
+
+	* sg.c: Clear buff field when not in use.  Only call scsi_free if
+	non-null.
+
+	* scsi.h: Call wake_up(&wait_for_request) when done with a
+	command.
+
+	* scsi.c (scsi_times_out): Pass pid down so that we can protect
+	against race conditions.
+
+	* scsi.c (scsi_abort): Zero timeout field if we get the
+	NOT_RUNNING message back from low-level driver.
+
+
+	* scsi.c (scsi_done): Restore cmd_len, use_sg here.
+
+	* scsi.c (request_sense): Not here.
+
+	* hosts.h: Add new forbidden_addr, forbidden_size fields.  Who
+	added these and why????
+
+	* hosts.c (scsi_mem_init): Mark pages as reserved if they fall in
+	the forbidden regions.  I am not sure - I think this is so that
+	we can deal with boards that do incomplete decoding of their
+	address lines for the bios chips, but I am not entirely sure.
+
+	* buslogic.c: Set forbidden_addr stuff if using a buggy board.
+
+	* aha1740.c: Test for NULL pointer in SCtmp.  This should not
+	occur, but a nice message is better than a kernel segfault.
+
+	* 53c7,8xx.c: Add new PCI chip ID for 815.
+
+Fri Dec  2 11:24:53 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.70 released.
+
+	* ChangeLog, st.c: Spelling.
+
+Tue Nov 29 18:48:42 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.69 released.
+
+	* u14-34f.h: Non-functional change.  [Dario].
+
+	* u14-34f.c: Use block field in Scsi_Host to prevent commands from
+	being queued to more than one host at the same time (used when
+	motherboard does not deal with multiple bus-masters very well).
+	Only when SINGLE_HOST_OPERATIONS is defined.
+	Use new cmd_per_lun field.  [Dario]
+
+	* eata.c: Likewise.
+
+	* st.c: More changes from Kai.  Add ready flag to indicate drive
+	status.
+
+	* README.st: Document this.
+
+	* sr.c: Bugfix (do not subtract CD_BLOCK_OFFSET) for photo-cd
+	code.
+
+	* sg.c: Bugfix - fix problem where opcode is not correctly set up.
+
+	* seagate.[c,h]: Use #defines to set driver name.
+
+	* scsi_ioctl.c: Zero buffer before executing command.
+
+	* scsi.c: Use new cmd_per_lun field in Scsi_Hosts as appropriate.
+	Add Sony CDU55S to blacklist.
+
+	* hosts.h: Add new cmd_per_lun field to Scsi_Hosts.
+
+	* hosts.c: Initialize cmd_per_lun in Scsi_Hosts from template.
+
+	* buslogic.c: Use cmd_per_lun field - initialize to different
+	values depending upon bus type (i.e. use 1 if ISA, so we do not
+	hog memory).  Use other patches which got lost from 1.1.68.
+
+	* aha1542.c: Spelling.
+
+Tue Nov 29 15:43:50 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.68 released.
+
+	Add support for 12 byte vendor specific commands in scsi-generics,
+	more (i.e. the last mandatory) low-level changes to support
+	loadable modules, plus a few other changes people have requested
+	lately.  Changes by me (ERY) unless otherwise noted.  Spelling
+	changes appear from some unknown corner of the universe.
+
+	* Throughout: Change COMMAND_SIZE() to use SCpnt->cmd_len.
+
+	* Throughout: Change info() low level function to take a Scsi_Host
+	pointer.  This way the info function can return specific
+	information about the host in question, if desired.
+
+	* All low-level drivers: Add NULL in initializer for the
+	usage_count field added to Scsi_Host_Template.
+
+	* aha152x.[c,h]: Remove redundant info() function.
+
+	* aha1542.[c,h]: Likewise.
+
+	* aha1740.[c,h]: Likewise.
+
+	* aha274x.[c,h]: Likewise.
+
+	* eata.[c,h]: Likewise.
+
+	* pas16.[c,h]: Likewise.
+
+	* scsi_debug.[c,h]: Likewise.
+
+	* t128.[c,h]: Likewise.
+
+	* u14-34f.[c,h]: Likewise.
+
+	* ultrastor.[c,h]: Likewise.
+
+	* wd7000.[c,h]: Likewise.
+
+	* aha1542.c: Add support for command line options with lilo to set
+	DMA parameters, I/O port.  From Matt Aarnio.
+
+	* buslogic.[c,h]: New version (1.13) from Dave Gentzel.
+
+	* hosts.h: Add new field to Scsi_Hosts "block" to allow blocking
+	all I/O to certain other cards.  Helps prevent problems with some
+	ISA motherboards.
+
+	* hosts.h: Add usage_count to Scsi_Host_Template.
+
+	* hosts.h: Add n_io_port to Scsi_Host (used when releasing module).
+
+	* hosts.c: Initialize block field.
+
+	* in2000.c: Remove "static" declarations from exported functions.
+
+	* in2000.h: Likewise.
+
+	* scsi.c: Correctly set cmd_len field as required.  Save and
+	change setting when doing a request_sense, restore when done.
+	Move abort timeout message.  Fix panic in request_queueable to
+	print correct function name.
+
+	* scsi.c: When incrementing usage count, walk block linked list
+	for host, and or in SCSI_HOST_BLOCK bit.  When decrementing usage
+	count to 0, clear this bit to allow usage to continue, wake up
+	processes waiting.
+
+
+	* scsi_ioctl.c: If we have an info() function, call it, otherwise
+	if we have a "name" field, use it, else do nothing.
+
+	* sd.c, sr.c: Clear cmd_len field prior to each command we
+	generate.
+
+	* sd.h: Add "has_part_table" bit to rscsi_disks.
+
+	* sg.[c,h]: Add support for vendor specific 12 byte commands (i.e.
+	override command length in COMMAND_SIZE).
+
+	* sr.c: Bugfix from Gerd in photocd code.
+
+	* sr.c: Bugfix in get_sectorsize - always use scsi_malloc buffer -
+	we cannot guarantee that the stack is < 16Mb.
+
+Tue Nov 22 15:40:46 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.67 released.
+
+	* sr.c: Change spelling of manufactor to manufacturer.
+
+	* scsi.h: Likewise.
+
+	* scsi.c: Likewise.
+
+	* qlogic.c: Spelling corrections.
+
+	* in2000.h: Spelling corrections.
+
+	* in2000.c: Update from Bill Earnest, change from
+	jshiffle@netcom.com.  Support new bios versions.
+
+	* README.qlogic: Spelling correction.
+
+Tue Nov 22 15:40:46 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.66 released.
+
+	* u14-34f.c: Spelling corrections.
+
+	* sr.[h,c]: Add support for multi-session CDs from Gerd Knorr.
+
+	* scsi.h: Add manufactor field for keeping track of device
+	manufacturer.
+
+	* scsi.c: More spelling corrections.
+
+	* qlogic.h, qlogic.c, README.qlogic: New driver from Tom Zerucha.
+
+	* in2000.c, in2000.h: New driver from Brad McLean/Bill Earnest.
+
+	* fdomain.c: Spelling correction.
+
+	* eata.c: Spelling correction.
+
+Fri Nov 18 15:22:44 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.65 released.
+
+	* eata.h: Update version string to 1.08.00.
+
+	* eata.c: Set sg_tablesize correctly for DPT PM2012 boards.
+
+	* aha274x.seq: Spell checking.
+
+	* README.st: Likewise.
+
+	* README.aha274x: Likewise.
+
+	* ChangeLog: Likewise.
+
+Tue Nov 15 15:35:08 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.64 released.
+
+	* u14-34f.h: Update version number to 1.10.01.
+
+	* u14-34f.c: Use Scsi_Host can_queue variable instead of one from template.
+
+	* eata.[c,h]: New driver for DPT boards from Dario Ballabio.
+
+	* buslogic.c: Use can_queue field.
+
+Wed Nov 30 12:09:09 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.63 released.
+
+	* sd.c: Give I/O error if we attempt 512 byte I/O to a disk with
+	1024 byte sectors.
+
+	* scsicam.c: Make sure we do read from whole disk (mask off
+	partition).
+
+	* scsi.c: Use can_queue in Scsi_Host structure.
+	Fix panic message about invalid host.
+
+	* hosts.c: Initialize can_queue from template.
+
+	* hosts.h: Add can_queue to Scsi_Host structure.
+
+	* aha1740.c: Print out warning about NULL ecbptr.
+
+Fri Nov  4 12:40:30 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.62 released.
+
+	* fdomain.c: Update to version 5.20. (From Rik Faith).  Support
+	BIOS version 3.5.
+
+	* st.h: Add ST_EOD symbol.
+
+	* st.c: Patches from Kai Makisara - support additional densities,
+	add support for MTFSS, MTBSS, MTWSM commands.
+
+	* README.st: Update to document new commands.
+
+	* scsi.c: Add Mediavision CDR-H93MV to blacklist.
+
+Sat Oct 29 20:57:36 1994  Eric Youngdale  (eric@andante.aib.com)
+
+	* Linux 1.1.60 released.
+
+	* u14-34f.[c,h]: New driver from Dario Ballabio.
+
+	* aic7770.c, aha274x_seq.h, aha274x.seq, aha274x.h, aha274x.c,
+	README.aha274x: New files, new driver from John Aycock.
+
+
+Tue Oct 11 08:47:39 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.54 released.
+
+	* Add third PCI chip id.  [Drew]
+
+	* buslogic.c: Set BUSLOGIC_CMDLUN back to 1 [Eric].
+
+	* ultrastor.c: Fix asm directives for new GCC.
+
+	* sr.c, sd.c: Use new end_scsi_request function.
+
+	* scsi.h(end_scsi_request): Return pointer to block if still
+	active, else return NULL if inactive.  Fixes race condition.
+
+Sun Oct  9 20:23:14 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.53 released.
+
+	* scsi.c: Do not allocate dma bounce buffers if we have exactly
+	16Mb.
+
+Fri Sep  9 05:35:30 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.51 released.
+
+	* aha152x.c: Add support for disabling the parity check.  Update
+	to version 1.4. [Juergen].
+
+	* seagate.c: Tweak debugging message.
+
+Wed Aug 31 10:15:55 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.50 released.
+
+	* aha152x.c: Add eb800 for Vtech Platinum SMP boards. [Juergen].
+
+	* scsi.c: Add Quantum PD1225S to blacklist.
+
+Fri Aug 26 09:38:45 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.49 released.
+
+	* sd.c: Fix bug when we were deleting the wrong entry if we
+	get an unsupported sector size device.
+
+	* sr.c: Another spelling patch.
+
+Thu Aug 25 09:15:27 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.48 released.
+
+	* Throughout: Use new semantics for request_dma, as appropriate.
+
+	* sr.c: Print correct device number.
+
+Sun Aug 21 17:49:23 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.47 released.
+
+	* NCR5380.c: Add support for LIMIT_TRANSFERSIZE.
+
+	* constants.h: Add prototype for print_Scsi_Cmnd.
+
+	* pas16.c: Some more minor tweaks.  Test for Mediavision board.
+	Allow for disks > 1Gb.  [Drew??]
+
+	* sr.c: Set SCpnt->transfersize.
+
+Tue Aug 16 17:29:35 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.46 released.
+
+	* Throughout: More spelling fixups.
+
+	* buslogic.c: Add a few more fixups from Dave.  Disk translation
+	mainly.
+
+	* pas16.c: Add a few patches (Drew?).
+
+
+Thu Aug 11 20:45:15 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.44 released.
+
+	* hosts.c: Add type casts for scsi_init_malloc.
+
+	* scsicam.c: Add type cast.
+
+Wed Aug 10 19:23:01 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.43 released.
+
+	* Throughout: Spelling cleanups. [??]
+
+	* aha152x.c, NCR53*.c, fdomain.c, g_NCR5380.c, pas16.c, seagate.c,
+	 t128.c: Use request_irq, not irqaction. [??]
+
+	* aha1542.c: Move test for shost before we start to use shost.
+
+	* aha1542.c, aha1740.c, ultrastor.c, wd7000.c: Use new
+	calling sequence for request_irq.
+
+	* buslogic.c: Update from Dave Gentzel.
+
+Tue Aug  9 09:32:59 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.42 released.
+
+	* NCR5380.c: Change NCR5380_print_status to static.
+
+	* seagate.c: A few more bugfixes.  Only Drew knows what they are
+	for.
+
+	* ultrastor.c: Tweak some __asm__ directives so that it works
+	with newer compilers. [??]
+
+Sat Aug  6 21:29:36 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.40 released.
+
+	* NCR5380.c: Return SCSI_RESET_WAKEUP from reset function.
+
+	* aha1542.c: Reset mailbox status after a bus device reset.
+
+	* constants.c: Fix typo (;;).
+
+	* g_NCR5380.c:
+	* pas16.c:  Correct usage of NCR5380_init.
+
+	* scsi.c: Remove redundant (and unused variables).
+
+	* sd.c: Use memset to clear all of rscsi_disks before we use it.
+
+	* sg.c: Ditto, except for scsi_generics.
+
+	* sr.c: Ditto, except for scsi_CDs.
+
+	* st.c: Initialize STp->device.
+
+	* seagate.c: Fix bug. [Drew]
+
+Thu Aug  4 08:47:27 1994  Eric Youngdale  (eric@andante)
+
+	* Linux 1.1.39 released.
+
+	* Makefile: Fix typo in NCR53C7xx.
+
+	* st.c: Print correct number for device.
+
+Tue Aug  2 11:29:14 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.38 released.
+
+	Lots of changes in 1.1.38.  All from Drew unless otherwise noted.
+
+	* 53c7,8xx.c: New file from Drew.  PCI driver.
+
+	* 53c7,8xx.h: Likewise.
+
+	* 53c7,8xx.scr: Likewise.
+
+	* 53c8xx_d.h, 53c8xx_u.h, script_asm.pl: Likewise.
+
+	* scsicam.c: New file from Drew.  Read block 0 on the disk and
+	read the partition table.  Attempt to deduce the geometry from
+	the partition table if possible.  Only used by 53c[7,8]xx right
+	now, but could be used by any device for which we have no way
+	of identifying the geometry.
+
+	* sd.c: Use device letters instead of sd%d in a lot of messages.
+
+	* seagate.c: Fix bug that resulted in lockups with some devices.
+
+	* sr.c (sr_open): Return -EROFS, not -EACCES if we attempt to open
+	device for write.
+
+	* hosts.c, Makefile: Update for new driver.
+
+	* NCR5380.c, NCR5380.h, g_NCR5380.h: Update from Drew to support
+	53C400 chip.
+
+	* constants.c: Define CONST_CMND and CONST_MSG.  Other minor
+	cleanups along the way.  Improve handling of CONST_MSG.
+
+	* fdomain.c, fdomain.h: New version from Rik Faith.  Update to
+	5.18.  Should now support TMC-3260 PCI card with 18C30 chip.
+
+	* pas16.c: Update with new irq initialization.
+
+	* t128.c: Update with minor cleanups.
+
+	* scsi.c (scsi_pid): New variable - gives each command a unique
+	id. Add Quantum LPS5235S to blacklist.  Change in_scan to
+	in_scan_scsis and make global.
+
+	* scsi.h: Add some defines for extended message handling,
+	INITIATE/RELEASE_RECOVERY.  Add a few new fields to support sync
+	transfers.
+
+	* scsi_ioctl.h: Add ioctl to request synchronous transfers.
+
+
+Tue Jul 26 21:36:58 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.37 released.
+
+	* aha1542.c: Always call aha1542_mbenable, use new udelay
+	mechanism so we do not wait a long time if the board does not
+	implement this command.
+
+	* g_NCR5380.c: Remove #include <linux/config.h> and #if
+	defined(CONFIG_SCSI_*).
+
+	* seagate.c: Likewise.
+
+	Next round of changes to support loadable modules.  Getting closer
+	now, still not possible to do anything remotely usable.
+
+	hosts.c: Create a linked list of detected high level devices.
+	(scsi_register_device): New function to insert into this list.
+	(scsi_init): Call scsi_register_device for each of the known high
+	level drivers.
+
+	hosts.h: Add prototype for linked list header.  Add structure
+	definition for device template structure which defines the linked
+	list.
+
+	scsi.c: (scan_scsis): Use linked list instead of knowledge about
+	existing high level device drivers.
+	(scsi_dev_init): Use init functions for drivers on linked list
+	instead of explicit list to initialize and attach devices to high
+	level drivers.
+
+	scsi.h: Add new field "attached" to scsi_device - count of number
+	of high level devices attached.
+
+	sd.c, sr.c, sg.c, st.c: Adjust init/attach functions to use new
+	scheme.
+
+Sat Jul 23 13:03:17 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.35 released.
+
+	* ultrastor.c: Change constraint on asm() operand so that it works
+	with gcc 2.6.0.
+
+Thu Jul 21 10:37:39 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.33 released.
+
+	* sr.c(sr_open): Do not allow opens with write access.
+
+Mon Jul 18 09:51:22 1994 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.31 released.
+
+	* sd.c: Increase SD_TIMEOUT from 300 to 600.
+
+	* sr.c: Remove stray task_struct* variable that was no longer
+	used.
+
+	* sr_ioctl.c: Fix typo in up() call.
+
+Sun Jul 17 16:25:29 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.30 released.
+
+	* scsi.c (scan_scsis): Fix detection of some Toshiba CDROM drives
+	that report themselves as disk drives.
+
+	* (Throughout): Use request.sem instead of request.waiting.
+	Should fix swap problem with fdomain.
+
+Thu Jul 14 10:51:42 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.29 released.
+
+	* scsi.c (scan_scsis): Add new devices to end of linked list, not
+	to the beginning.
+
+	* scsi.h (SCSI_SLEEP): Remove brain dead hack to try to save
+	the task state before sleeping.
+
+Sat Jul  9 15:01:03 1994  Eric Youngdale  (eric@esp22)
+
+	More changes to eventually support loadable modules.  Mainly
+	we want to use linked lists instead of arrays because it is easier
+	to dynamically add and remove things this way.
+
+	Quite a bit more work is needed before loadable modules are
+	possible (and usable) with scsi, but this is most of the grunge
+	work.
+
+	* Linux 1.1.28 released.
+
+	* scsi.c, scsi.h (allocate_device, request_queueable): Change
+	argument from index into scsi_devices to a pointer to the
+	Scsi_Device struct.
+
+	* Throughout: Change all calls to allocate_device,
+	request_queueable to use new calling sequence.
+
+	* Throughout: Use SCpnt->device instead of
+	scsi_devices[SCpnt->index].  Ugh - the pointer was there all along
+	- much cleaner this way.
+
+	* scsi.c (scsi_init_malloc, scsi_free_malloc): New functions -
+	allow us to pretend that we have a working malloc when we
+	initialize.  Use this instead of passing memory_start, memory_end
+	around all over the place.
+
+	* scsi.h, st.c, sr.c, sd.c, sg.c: Change *_init1 functions to use
+	scsi_init_malloc, remove all arguments, no return value.
+
+	* scsi.h: Remove index field from Scsi_Device and Scsi_Cmnd
+	structs.
+
+	* scsi.c (scsi_dev_init): Set up for scsi_init_malloc.
+	(scan_scsis): Get SDpnt from scsi_init_malloc, and refresh
+	when we discover a device.  Free pointer before returning.
+	Change scsi_devices into a linked list.
+
+	* scsi.c (scan_scsis): Change to only scan one host.
+	(scsi_dev_init): Loop over all detected hosts, and scan them.
+
+	* hosts.c  (scsi_init_free): Change so that  number of extra bytes
+	is stored in struct, and we do not have to pass it each time.
+
+	* hosts.h: Change Scsi_Host_Template struct to include "next" and
+	"release" functions.  Initialize to NULL in all low level
+	adapters.
+
+	* hosts.c: Rename scsi_hosts to builtin_scsi_hosts, create linked
+	list scsi_hosts, linked together with the new "next" field.
+
+Wed Jul  6 05:45:02 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.25 released.
+
+	* aha152x.c: Changes from Juergen - cleanups and updates.
+
+	* sd.c, sr.c: Use new check_media_change and revalidate
+	file_operations fields.
+
+	* st.c, st.h: Add changes from Kai Makisara, dated Jun 22.
+
+	* hosts.h: Change SG_ALL back to 0xff.  Apparently soft error
+	in /dev/brain resulted in having this bumped up.
+	Change first parameter in bios_param function to be Disk * instead
+	of index into rscsi_disks.
+
+	* sd_ioctl.c: Pass pointer to rscsi_disks element instead of index
+	to array.
+
+	* sd.h: Add struct name "scsi_disk" to typedef for Scsi_Disk.
+
+	* scsi.c: Remove redundant Maxtor XT8760S from blacklist.
+	In scsi_reset, add printk when DEBUG defined.
+
+	* All low level drivers: Modify definitions of bios_param in
+	appropriate way.
+
+Thu Jun 16 10:31:59 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.20 released.
+
+	* scsi_ioctl.c: Only pass down the actual number of characters
+	required to scsi_do_cmd, not the one rounded up to a even number
+	of sectors.
+
+	* ultrastor.c: Changes from Caleb Epstein for 24f cards.  Support
+	larger SG lists.
+
+	* ultrastor.c: Changes from me - use scsi_register to register
+	host.  Add some consistency checking,
+
+Wed Jun  1 21:12:13 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.19 released.
+
+	* scsi.h: Add new return code for reset() function:
+	SCSI_RESET_PUNT.
+
+	* scsi.c: Make SCSI_RESET_PUNT the same as SCSI_RESET_WAKEUP for
+	now.
+
+	* aha1542.c: If the command responsible for the reset is not
+	pending, return SCSI_RESET_PUNT.
+
+	* aha1740.c, buslogic.c, wd7000.c, ultrastor.c: Return
+	SCSI_RESET_PUNT instead of SCSI_RESET_SNOOZE.
+
+Tue May 31 19:36:01 1994  Eric Youngdale  (eric@esp22)
+
+	* buslogic.c: Do not print out message about "must be Adaptec"
+	if we have detected a buslogic card.  Print out a warning message
+	if we are configuring for >16Mb, since the 445S at board level
+	D or earlier does not work right.  The "D" level board can be made
+	to work by flipping an undocumented switch, but this is too subtle.
+
+    Changes based upon patches in Yggdrasil distribution.
+
+	* sg.c, sg.h: Return sense data to user.
+
+	* aha1542.c, aha1740.c, buslogic.c: Do not panic if
+	sense buffer is wrong size.
+
+	* hosts.c: Test for ultrastor card before any of the others.
+
+	* scsi.c: Allow boot-time option for max_scsi_luns=? so that
+	buggy firmware has an easy work-around.
+
+Sun May 15 20:24:34 1994  Eric Youngdale  (eric@esp22)
+
+	* Linux 1.1.15 released.
+
+	Post-codefreeze thaw...
+
+	* buslogic.[c,h]: New driver from David Gentzel.
+
+	* hosts.h: Add use_clustering field to explicitly say whether
+	clustering should be used for devices attached to this host
+	adapter.  The buslogic board apparently supports large SG lists,
+	but it is apparently faster if sd.c condenses this into a smaller
+	list.
+
+	* sd.c: Use this field instead of heuristic.
+
+	* All host adapter include files: Add appropriate initializer for
+	use_clustering field.
+
+	* scsi.h: Add #defines for return codes for the abort and reset
+	functions.  There are now a specific set of return codes to fully
+	specify all of the possible things that the low-level adapter
+	could do.
+
+	* scsi.c: Act based upon return codes from abort/reset functions.
+
+	* All host adapter abort/reset functions: Return new return code.
+
+	* Add code in scsi.c to help debug timeouts.  Use #define
+	DEBUG_TIMEOUT to enable this.
+
+	* scsi.c: If the host->irq field is set, use
+	disable_irq/enable_irq before calling queuecommand if we
+	are not already in an interrupt.  Reduce races, and we
+	can be sloppier about cli/sti in the interrupt routines now
+	(reduce interrupt latency).
+
+	* constants.c: Fix some things to eliminate warnings.  Add some
+	sense descriptions that were omitted before.
+
+	* aha1542.c: Watch for SCRD from host adapter - if we see it, set
+	a flag.  Currently we only print out the number of pending
+	commands that might need to be restarted.
+
+	* aha1542.c (aha1542_abort): Look for lost interrupts, OGMB still
+	full, and attempt to recover.  Otherwise give up.
+
+	* aha1542.c (aha1542_reset): Try BUS DEVICE RESET, and then pass
+	DID_RESET back up to the upper level code for all commands running
+	on this target (even on different LUNs).
+
+Sat May  7 14:54:01 1994
+
+	* Linux 1.1.12 released.
+
+	* st.c, st.h: New version from Kai.  Supports boot time
+	specification of number of buffers.
+
+	* wd7000.[c,h]: Updated driver from John Boyd.  Now supports
+	more than one wd7000 board in machine at one time, among other things.
+
+Wed Apr 20 22:20:35 1994
+
+	* Linux 1.1.8 released.
+
+	* sd.c: Add a few type casts where scsi_malloc is called.
+
+Wed Apr 13 12:53:29 1994
+
+	* Linux 1.1.4 released.
+
+	* scsi.c: Clean up a few printks (use %p to print pointers).
+
+Wed Apr 13 11:33:02 1994
+
+	* Linux 1.1.3 released.
+
+	* fdomain.c: Update to version 5.16 (Handle different FIFO sizes
+	better).
+
+Fri Apr  8 08:57:19 1994
+
+	* Linux 1.1.2 released.
+
+	* Throughout: SCSI portion of cluster diffs added.
+
+Tue Apr  5 07:41:50 1994
+
+	* Linux 1.1 development tree initiated.
+
+	* The linux 1.0 development tree is now effectively frozen except
+	for obvious bugfixes.
+
+******************************************************************
+******************************************************************
+******************************************************************
+******************************************************************
+
+Sun Apr 17 00:17:39 1994
+
+	* Linux 1.0, patchlevel 9 released.
+
+	* fdomain.c: Update to version 5.16 (Handle different FIFO sizes
+	better).
+
+Thu Apr  7 08:36:20 1994
+
+	* Linux 1.0, patchlevel8 released.
+
+	* fdomain.c: Update to version 5.15 from 5.9.  Handles 3.4 bios.
+
+Sun Apr  3 14:43:03 1994
+
+	* Linux 1.0, patchlevel6 released.
+
+	* wd7000.c: Make stab at fixing race condition.
+
+Sat Mar 26 14:14:50 1994
+
+	* Linux 1.0, patchlevel5 released.
+
+	* aha152x.c, Makefile: Fix a few bugs (too much data message).
+	Add a few more bios signatures. (Patches from Juergen).
+
+	* aha1542.c: Fix race condition in aha1542_out.
+
+Mon Mar 21 16:36:20 1994
+
+	* Linux 1.0, patchlevel3 released.
+
+	* sd.c, st.c, sr.c, sg.c: Return -ENXIO, not -ENODEV if we attempt
+	to open a non-existent device.
+
+	* scsi.c: Add Chinon cdrom to blacklist.
+
+	* sr_ioctl.c: Check return status of verify_area.
+
+Sat Mar  6 16:06:19 1994
+
+	* Linux 1.0 released (technically a pre-release).
+
+	* scsi.c: Add IMS CDD521, Maxtor XT-8760S to blacklist.
+
+Tue Feb 15 10:58:20 1994
+
+        * pl15e released.
+
+        * aha1542.c: For 1542C, allow dynamic device scan with >1Gb turned
+	off.
+
+	* constants.c: Fix typo in definition of CONSTANTS.
+
+        * pl15d released.
+
+Fri Feb 11 10:10:16 1994
+
+        * pl15c released.
+
+	* scsi.c: Add Maxtor XT-3280 and Rodime RO3000S to blacklist.
+
+	* scsi.c: Allow tagged queueing for scsi 3 devices as well.
+	Some really old devices report a version number of 0.  Disallow
+	LUN != 0 for these.
+
+Thu Feb 10 09:48:57 1994
+
+        * pl15b released.
+
+Sun Feb  6 12:19:46 1994
+
+        * pl15a released.
+
+Fri Feb  4 09:02:17 1994
+
+        * scsi.c: Add Teac cdrom to blacklist.
+
+Thu Feb  3 14:16:43 1994
+
+	* pl15 released.
+
+Tue Feb  1 15:47:43 1994
+
+	* pl14w released.
+
+	* wd7000.c (wd_bases): Fix typo in last change.
+
+Mon Jan 24 17:37:23 1994
+
+	* pl14u released.
+
+	* aha1542.c: Support 1542CF/extended bios.  Different from 1542C
+
+	* wd7000.c: Allow bios at 0xd8000 as well.
+
+	* ultrastor.c: Do not truncate cylinders to 1024.
+
+	* fdomain.c: Update to version 5.9 (add new bios signature).
+
+	* NCR5380.c: Update from Drew - should work a lot better now.
+
+Sat Jan  8 15:13:10 1994
+
+	* pl14o released.
+
+	* sr_ioctl.c: Zero reserved field before trying to set audio volume.
+
+Wed Jan  5 13:21:10 1994
+
+	* pl14m released.
+
+	* fdomain.c: Update to version 5.8.  No functional difference???
+
+Tue Jan  4 14:26:13 1994
+
+	* pl14l released.
+
+	* ultrastor.c: Remove outl, inl functions (now provided elsewhere).
+
+Mon Jan  3 12:27:25 1994
+
+	* pl14k released.
+
+	* aha152x.c: Remove insw and outsw functions.
+
+	* fdomain.c: Ditto.
+
+Wed Dec 29 09:47:20 1993
+
+	* pl14i released.
+
+	* scsi.c: Support RECOVERED_ERROR for tape drives.
+
+	* st.c: Update of tape driver from Kai.
+
+Tue Dec 21 09:18:30 1993
+
+	* pl14g released.
+
+	* aha1542.[c,h]: Support extended BIOS stuff.
+
+	* scsi.c: Clean up messages about disks, so they are displayed as
+	sda, sdb, etc instead of sd0, sd1, etc.
+
+	* sr.c:  Force reread of capacity if disk was changed.
+	Clear buffer before asking for capacity/sectorsize (some drives
+	do not report this properly).  Set needs_sector_size flag if
+	drive did not return sensible sector size.
+
+Mon Dec 13 12:13:47 1993
+
+	* aha152x.c: Update to version .101 from Juergen.
+
+Mon Nov 29 03:03:00 1993
+
+        * linux 0.99.14 released.
+
+	* All scsi stuff moved from kernel/blk_drv/scsi to drivers/scsi.
+
+	* Throughout: Grammatical corrections to various comments.
+
+	* Makefile: fix so that we do not need to compile things we are
+	not going to use.
+
+	* NCR5380.c, NCR5380.h, g_NCR5380.c, g_NCR5380.h, pas16.c,
+	pas16.h, t128.c, t128.h:  New files from Drew.
+
+	* aha152x.c, aha152x.h: New files from Juergen Fischer.
+
+	* aha1542.c: Support for more than one 1542 in the machine
+	at the same time.  Make functions static that do not need
+	visibility.
+
+	* aha1740.c: Set NEEDS_JUMPSTART flag in reset function, so we
+	know to restart the command.  Change prototype of aha1740_reset
+	to take a command pointer.
+
+	* constants.c: Clean up a few things.
+
+	* fdomain.c: Update to version 5.6.  Move snarf_region.  Allow
+	board to be set at different SCSI ids.  Remove support for
+	reselection (did not work well).  Set JUMPSTART flag in reset
+	code.
+
+	* hosts.c: Support new low-level adapters.  Allow for more than
+	one adapter of a given type.
+
+	* hosts.h: Allow for more than one adapter of a given type.
+
+	* scsi.c:  Add scsi_device_types array, if NEEDS_JUMPSTART is set
+	after a low-level reset, start the command again.  Sort blacklist,
+	and add Maxtor MXT-1240S, XT-4170S, NEC CDROM 84, Seagate ST157N.
+
+	* scsi.h: Add constants for tagged queueing.
+
+	* Throughout: Use constants from major.h instead of hardcoded
+	numbers for major numbers.
+
+	* scsi_ioctl.c: Fix bug in buffer length in ioctl_command.  Use
+	verify_area in GET_IDLUN ioctl.  Add new ioctls for
+	TAGGED_QUEUE_ENABLE, DISABLE.  Only allow IOCTL_SEND_COMMAND by
+	superuser.
+
+	* sd.c: Only pay attention to UNIT_ATTENTION for removable disks.
+	Fix bug where sometimes portions of blocks would get lost
+	resulting in processes hanging.  Add messages when we spin up a
+	disk, and fix a bug in the timing.  Increase read-ahead for disks
+	that are on a scatter-gather capable host adapter.
+
+	* seagate.c: Fix so that some parameters can be set from the lilo
+	prompt.  Supply jumpstart flag if we are resetting and need the
+	command restarted.   Fix so that we return 1 if we detect a card
+	so that multiple card detection works correctly.  Add yet another
+	signature for FD cards (950).  Add another signature for ST0x.
+
+	* sg.c, sg.h: New files from Lawrence Foard for generic scsi
+	access.
+
+	* sr.c:  Add type casts for (void*) so that we can do pointer
+	arithmetic.  Works with GCC without this, but it is not strictly
+	correct.  Same bugfix as was in sd.c.  Increase read-ahead a la
+	disk driver.
+
+	* sr_ioctl.c: Use scsi_malloc buffer instead of buffer from stack
+	since we cannot guarantee that the stack is < 16Mb.
+
+	ultrastor.c: Update to support 24f properly (JFC's driver).
+
+	wd7000.c: Supply jumpstart flag for reset.  Do not round up
+	number of cylinders in biosparam function.
+
+Sat Sep  4 20:49:56 1993
+
+    * 0.99pl13 released.
+
+    * Throughout:  Use check_region/snarf_region for all low-level
+    drivers.
+
+    * aha1542.c: Do hard reset instead of soft (some ethercard probes
+    screw us up).
+
+    * scsi.c: Add new flag ASKED_FOR_SENSE so that we can tell if we are
+    in a loop whereby the device returns null sense data.
+
+    * sd.c: Add code to spin up a drive if it is not already spinning.
+    Do this one at a time to make it easier on power supplies.
+
+    * sd_ioctl.c: Use sync_dev instead of fsync_dev in BLKFLSBUF ioctl.
+
+    * seagate.c: Switch around DATA/CONTROL lines.
+
+    * st.c: Change sense to unsigned.
+
+Thu Aug  5 11:59:18 1993
+
+    * 0.99pl12 released.
+
+    * constants.c, constants.h: New files with ascii descriptions of
+    various conditions.
+
+    * Makefile: Do not try to count the number of low-level drivers,
+    just generate the list of .o files.
+
+    * aha1542.c: Replace 16 with sizeof(SCpnt->sense_buffer).  Add tests
+    for addresses > 16Mb, panic if we find one.
+
+    * aha1740.c: Ditto with sizeof().
+
+    * fdomain.c: Update to version 3.18.  Add new signature, register IRQ
+    with irqaction.  Use ID 7 for new board.  Be more intelligent about
+    obtaining the h/s/c numbers for biosparam.
+
+    * hosts.c: Do not depend upon Makefile generated count of the number
+    of low-level host adapters.
+
+    * scsi.c: Use array for scsi_command_size instead of a function.  Add
+    Texel cdrom and Maxtor XT-4380S to blacklist.  Allow compile time
+    option for no-multi lun scan.  Add semaphore for possible problems
+    with handshaking, assume device is faulty until we know it not to be
+    the case.  Add DEBUG_INIT symbol to dump info as we scan for devices.
+    Zero sense buffer so we can tell if we need to request it.  When
+    examining sense information, request sense if buffer is all zero.
+    If RESET, request sense information to see what to do next.
+
+    * scsi_debug.c: Change some constants to use symbols like INT_MAX.
+
+    * scsi_ioctl.c (kernel_scsi_ioctl): New function -for making ioctl
+    calls from kernel space.
+
+    * sd.c: Increase timeout to 300.  Use functions in constants.h to
+    display info.  Use scsi_malloc buffer for READ_CAPACITY, since
+    we cannot guarantee that a stack based buffer is < 16Mb.
+
+    * sd_ioctl.c: Add BLKFLSBUF ioctl.
+
+    * seagate.c: Add new compile time options for ARBITRATE,
+    SLOW_HANDSHAKE, and SLOW_RATE.  Update assembly loops for transferring
+    data.  Use kernel_scsi_ioctl to request mode page with geometry.
+
+    * sr.c: Use functions in constants.c to display messages.
+
+    * st.c: Support for variable block size.
+
+    * ultrastor.c: Do not use cache for tape drives.  Set
+    unchecked_isa_dma flag, even though this may not be needed (gets set
+    later).
+
+Sat Jul 17 18:32:44 1993
+
+    * 0.99pl11 released.  C++ compilable.
+
+    * Throughout: Add type casts all over the place, and use "ip" instead
+    of "info" in the various biosparam functions.
+
+    * Makefile: Compile seagate.c with C++ compiler.
+
+    * aha1542.c: Always set ccb pointer as this gets trashed somehow on
+    some systems.  Add a few type casts.  Update biosparam function a little.
+
+    * aha1740.c: Add a few type casts.
+
+    * fdomain.c: Update to version 3.17 from 3.6.  Now works with
+    TMC-18C50.
+
+    * scsi.c: Minor changes here and there with datatypes.  Save use_sg
+    when requesting sense information so that this can properly be
+    restored if we retry the command.  Set aside dma buffers assuming each
+    block is 1 page, not 1Kb minix block.
+
+    * scsi_ioctl.c: Add a few type casts.  Other minor changes.
+
+    * sd.c:  Correctly  free all scsi_malloc'd memory if we run out of
+    dma_pool. Store blocksize information for each partition.
+
+    * seagate.c: Minor cleanups here and there.
+
+    * sr.c: Set up blocksize array for all discs.  Fix bug in freeing
+    buffers if we run out of dma pool.
+
+Thu Jun  2 17:58:11 1993
+
+    * 0.99pl10 released.
+
+    * aha1542.c: Support for BT 445S (VL-bus board with no dma channel).
+
+    * fdomain.c: Upgrade to version 3.6. Preliminary support for TNC-18C50.
+
+    * scsi.c: First attempt to fix problem with old_use_sg.  Change
+    NOT_READY to a SUGGEST_ABORT.  Fix timeout race where time might
+    get decremented past zero.
+
+    * sd.c: Add block_fsync function to dispatch table.
+
+    * sr.c: Increase timeout to 500 from 250.  Add entry for sync in
+    dispatch table (supply NULL).  If we do not have a sectorsize,
+    try to get it in the sd_open function.  Add new function just to
+    obtain sectorsize.
+
+    * sr.h: Add needs_sector_size semaphore.
+
+    * st.c: Add NULL for fsync in dispatch table.
+
+    * wd7000.c: Allow another condition for power on that are normal
+    and do not require a panic.
+
+Thu Apr 22 23:10:11 1993
+
+    * 0.99pl9 released.
+
+    * aha1542.c: Use (void) instead of () in setup_mailboxes.
+
+    * scsi.c: Initialize transfersize and underflow fields in SCmd to 0.
+    Do not panic for unsupported message bytes.
+
+    * scsi.h: Allocate 12 bytes instead of 10 for commands.  Add
+    transfersize and underflow fields.
+
+    * scsi_ioctl.c: Further bugfix to ioctl_probe.
+
+    * sd.c: Use long instead of int for last parameter in sd_ioctl.
+    Initialize transfersize and underflow fields.
+
+    * sd_ioctl.c: Ditto for sd_ioctl(,,,,);
+
+    * seagate.c: New version from Drew.  Includes new signatures for FD
+    cards.  Support for 0ws jumper. Correctly initialize
+    scsi_hosts[hostnum].this_id.  Improved handing of
+    disconnect/reconnect, and support command linking.  Use
+    transfersize and underflow fields.  Support scatter-gather.
+
+    * sr.c, sr_ioctl.c: Use long instead of int for last parameter in sr_ioctl.
+    Use buffer and buflength in do_ioctl.  Patches from Chris Newbold for
+    scsi-2 audio commands.
+
+    * ultrastor.c: Comment out in_byte (compiler warning).
+
+    * wd7000.c: Change () to (void) in wd7000_enable_dma.
+
+Wed Mar 31 16:36:25 1993
+
+    * 0.99pl8 released.
+
+    * aha1542.c: Handle mailboxes better for 1542C.
+        Do not truncate number of cylinders at 1024 for biosparam call.
+
+    * aha1740.c: Fix a few minor bugs for multiple devices.
+        Same as above for biosparam.
+
+    * scsi.c: Add lockable semaphore for removable devices that can have
+    media removal prevented.  Add another signature for flopticals.
+    (allocate_device): Fix race condition.  Allow more space in dma pool
+    for blocksizes of up to 4Kb.
+
+    * scsi.h: Define COMMAND_SIZE.  Define a SCSI specific version of
+    INIT_REQUEST that can run with interrupts off.
+
+    * scsi_ioctl.c: Make ioctl_probe function more idiot-proof.  If
+    a removable device says ILLEGAL REQUEST to a door-locking command,
+    clear lockable flag.  Add SCSI_IOCTL_GET_IDLUN ioctl.  Do not attempt
+    to lock door for devices that do not have lockable semaphore set.
+
+    * sd.c: Fix race condition for multiple disks.  Use INIT_SCSI_REQUEST
+    instead of INIT_REQUEST.  Allow sector sizes of 1024 and 256.  For
+    removable disks that are not ready, mark them as having a media change
+    (some drives do not report this later).
+
+    * seagate.c: Use volatile keyword for memory-mapped register pointers.
+
+    * sr.c: Fix race condition, a la sd.c.  Increase the number of retries
+    to 1.  Use INIT_SCSI_REQUEST.  Allow 512 byte sector sizes.  Do a
+    read_capacity when we init the device so we know the size and
+    sectorsize.
+
+    * st.c: If ioctl not found in st.c, try scsi_ioctl for others.
+
+    * ultrastor.c: Do not truncate number of cylinders at 1024 for
+    biosparam call.
+
+    * wd7000.c: Ditto.
+    Throughout: Use COMMAND_SIZE macro to determine length of scsi
+    command.
+
+
+
+Sat Mar 13 17:31:29 1993
+
+    * 0.99pl7 released.
+
+    Throughout: Improve punctuation in some messages, and use new
+    verify_area syntax.
+
+    * aha1542.c: Handle unexpected interrupts better.
+
+    * scsi.c: Ditto.  Handle reset conditions a bit better, asking for
+    sense information and retrying if required.
+
+    * scsi_ioctl.c: Allow for 12 byte scsi commands.
+
+    * ultrastor.c: Update to use scatter-gather.
+
+Sat Feb 20 17:57:15 1993
+
+    * 0.99pl6 released.
+
+    * fdomain.c: Update to version 3.5.  Handle spurious interrupts
+    better.
+
+    * sd.c: Use register_blkdev function.
+
+    * sr.c: Ditto.
+
+    * st.c: Use register_chrdev function.
+
+    * wd7000.c: Undo previous change.
+
+Sat Feb  6 11:20:43 1993
+
+    * 0.99pl5 released.
+
+    * scsi.c: Fix bug in testing for UNIT_ATTENTION.
+
+    * wd7000.c: Check at more addresses for bios.  Fix bug in biosparam
+    (heads & sectors turned around).
+
+Wed Jan 20 18:13:59 1993
+
+    * 0.99pl4 released.
+
+    * scsi.c: Ignore leading spaces when looking for blacklisted devices.
+
+    * seagate.c: Add a few new signatures for FD cards.  Another patch
+    with SCint to fix race condition.  Use recursion_depth to keep track
+    of how many times we have been recursively called, and do not start
+    another command unless we are on the outer level.  Fixes bug
+    with Syquest cartridge drives (used to crash kernel), because
+    they do not disconnect with large data transfers.
+
+Tue Jan 12 14:33:36 1993
+
+    * 0.99pl3 released.
+
+    * fdomain.c: Update to version 3.3 (a few new signatures).
+
+    * scsi.c: Add CDU-541, Denon DRD-25X to blacklist.
+    (allocate_request, request_queueable): Init request.waiting to NULL if
+    non-buffer type of request.
+
+    * seagate.c:  Allow controller to be overridden with CONTROLLER symbol.
+    Set SCint=NULL when we are done, to remove race condition.
+
+    * st.c: Changes from Kai.
+
+Wed Dec 30 20:03:47 1992
+
+    * 0.99pl2 released.
+
+    * scsi.c: Blacklist back in.  Remove Newbury drive as other bugfix
+    eliminates need for it here.
+
+    * sd.c: Return ENODEV instead of EACCES if no such device available.
+    (sd_init) Init blkdev_fops earlier so that sd_open is available sooner.
+
+    * sr.c: Same as above for sd.c.
+
+    * st.c: Return ENODEV instead of ENXIO if no device.  Init chrdev_fops
+    sooner, so that it is always there even if no tapes.
+
+    * seagate.c (controller_type): New variable to keep track of ST0x or
+    FD.  Modify signatures list to indicate controller type, and init
+    controller_type once we find a match.
+
+    * wd7000.c (wd7000_set_sync): Remove redundant function.
+
+Sun Dec 20 16:26:24 1992
+
+    * 0.99pl1 released.
+
+    * scsi_ioctl.c: Bugfix - check dev->index, not dev->id against
+    NR_SCSI_DEVICES.
+
+    * sr_ioctl.c: Verify that device exists before allowing an ioctl.
+
+    * st.c: Patches from Kai - change timeout values, improve end of tape
+    handling.
+
+Sun Dec 13 18:15:23 1992
+
+    * 0.99 kernel released.  Baseline for this ChangeLog.