diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/spinlocks.txt | |
download | kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_tuna-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/spinlocks.txt')
-rw-r--r-- | Documentation/spinlocks.txt | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt new file mode 100644 index 0000000..c212299 --- /dev/null +++ b/Documentation/spinlocks.txt @@ -0,0 +1,212 @@ +UPDATE March 21 2005 Amit Gud <gud@eth.net> + +Macros SPIN_LOCK_UNLOCKED and RW_LOCK_UNLOCKED are deprecated and will be +removed soon. So for any new code dynamic initialization should be used: + + spinlock_t xxx_lock; + rwlock_t xxx_rw_lock; + + static int __init xxx_init(void) + { + spin_lock_init(&xxx_lock); + rw_lock_init(&xxx_rw_lock); + ... + } + + module_init(xxx_init); + +Reasons for deprecation + - it hurts automatic lock validators + - it becomes intrusive for the realtime preemption patches + +Following discussion is still valid, however, with the dynamic initialization +of spinlocks instead of static. + +----------------------- + +On Fri, 2 Jan 1998, Doug Ledford wrote: +> +> I'm working on making the aic7xxx driver more SMP friendly (as well as +> importing the latest FreeBSD sequencer code to have 7895 support) and wanted +> to get some info from you. The goal here is to make the various routines +> SMP safe as well as UP safe during interrupts and other manipulating +> routines. So far, I've added a spin_lock variable to things like my queue +> structs. Now, from what I recall, there are some spin lock functions I can +> use to lock these spin locks from other use as opposed to a (nasty) +> save_flags(); cli(); stuff; restore_flags(); construct. Where do I find +> these routines and go about making use of them? Do they only lock on a +> per-processor basis or can they also lock say an interrupt routine from +> mucking with a queue if the queue routine was manipulating it when the +> interrupt occurred, or should I still use a cli(); based construct on that +> one? + +See <asm/spinlock.h>. The basic version is: + + spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED; + + + unsigned long flags; + + spin_lock_irqsave(&xxx_lock, flags); + ... critical section here .. + spin_unlock_irqrestore(&xxx_lock, flags); + +and the above is always safe. It will disable interrupts _locally_, but the +spinlock itself will guarantee the global lock, so it will guarantee that +there is only one thread-of-control within the region(s) protected by that +lock. + +Note that it works well even under UP - the above sequence under UP +essentially is just the same as doing a + + unsigned long flags; + + save_flags(flags); cli(); + ... critical section ... + restore_flags(flags); + +so the code does _not_ need to worry about UP vs SMP issues: the spinlocks +work correctly under both (and spinlocks are actually more efficient on +architectures that allow doing the "save_flags + cli" in one go because I +don't export that interface normally). + +NOTE NOTE NOTE! The reason the spinlock is so much faster than a global +interrupt lock under SMP is exactly because it disables interrupts only on +the local CPU. The spin-lock is safe only when you _also_ use the lock +itself to do locking across CPU's, which implies that EVERYTHING that +touches a shared variable has to agree about the spinlock they want to +use. + +The above is usually pretty simple (you usually need and want only one +spinlock for most things - using more than one spinlock can make things a +lot more complex and even slower and is usually worth it only for +sequences that you _know_ need to be split up: avoid it at all cost if you +aren't sure). HOWEVER, it _does_ mean that if you have some code that does + + cli(); + .. critical section .. + sti(); + +and another sequence that does + + spin_lock_irqsave(flags); + .. critical section .. + spin_unlock_irqrestore(flags); + +then they are NOT mutually exclusive, and the critical regions can happen +at the same time on two different CPU's. That's fine per se, but the +critical regions had better be critical for different things (ie they +can't stomp on each other). + +The above is a problem mainly if you end up mixing code - for example the +routines in ll_rw_block() tend to use cli/sti to protect the atomicity of +their actions, and if a driver uses spinlocks instead then you should +think about issues like the above.. + +This is really the only really hard part about spinlocks: once you start +using spinlocks they tend to expand to areas you might not have noticed +before, because you have to make sure the spinlocks correctly protect the +shared data structures _everywhere_ they are used. The spinlocks are most +easily added to places that are completely independent of other code (ie +internal driver data structures that nobody else ever touches, for +example). + +---- + +Lesson 2: reader-writer spinlocks. + +If your data accesses have a very natural pattern where you usually tend +to mostly read from the shared variables, the reader-writer locks +(rw_lock) versions of the spinlocks are often nicer. They allow multiple +readers to be in the same critical region at once, but if somebody wants +to change the variables it has to get an exclusive write lock. The +routines look the same as above: + + rwlock_t xxx_lock = RW_LOCK_UNLOCKED; + + + unsigned long flags; + + read_lock_irqsave(&xxx_lock, flags); + .. critical section that only reads the info ... + read_unlock_irqrestore(&xxx_lock, flags); + + write_lock_irqsave(&xxx_lock, flags); + .. read and write exclusive access to the info ... + write_unlock_irqrestore(&xxx_lock, flags); + +The above kind of lock is useful for complex data structures like linked +lists etc, especially when you know that most of the work is to just +traverse the list searching for entries without changing the list itself, +for example. Then you can use the read lock for that kind of list +traversal, which allows many concurrent readers. Anything that _changes_ +the list will have to get the write lock. + +Note: you cannot "upgrade" a read-lock to a write-lock, so if you at _any_ +time need to do any changes (even if you don't do it every time), you have +to get the write-lock at the very beginning. I could fairly easily add a +primitive to create a "upgradeable" read-lock, but it hasn't been an issue +yet. Tell me if you'd want one. + +---- + +Lesson 3: spinlocks revisited. + +The single spin-lock primitives above are by no means the only ones. They +are the most safe ones, and the ones that work under all circumstances, +but partly _because_ they are safe they are also fairly slow. They are +much faster than a generic global cli/sti pair, but slower than they'd +need to be, because they do have to disable interrupts (which is just a +single instruction on a x86, but it's an expensive one - and on other +architectures it can be worse). + +If you have a case where you have to protect a data structure across +several CPU's and you want to use spinlocks you can potentially use +cheaper versions of the spinlocks. IFF you know that the spinlocks are +never used in interrupt handlers, you can use the non-irq versions: + + spin_lock(&lock); + ... + spin_unlock(&lock); + +(and the equivalent read-write versions too, of course). The spinlock will +guarantee the same kind of exclusive access, and it will be much faster. +This is useful if you know that the data in question is only ever +manipulated from a "process context", ie no interrupts involved. + +The reasons you mustn't use these versions if you have interrupts that +play with the spinlock is that you can get deadlocks: + + spin_lock(&lock); + ... + <- interrupt comes in: + spin_lock(&lock); + +where an interrupt tries to lock an already locked variable. This is ok if +the other interrupt happens on another CPU, but it is _not_ ok if the +interrupt happens on the same CPU that already holds the lock, because the +lock will obviously never be released (because the interrupt is waiting +for the lock, and the lock-holder is interrupted by the interrupt and will +not continue until the interrupt has been processed). + +(This is also the reason why the irq-versions of the spinlocks only need +to disable the _local_ interrupts - it's ok to use spinlocks in interrupts +on other CPU's, because an interrupt on another CPU doesn't interrupt the +CPU that holds the lock, so the lock-holder can continue and eventually +releases the lock). + +Note that you can be clever with read-write locks and interrupts. For +example, if you know that the interrupt only ever gets a read-lock, then +you can use a non-irq version of read locks everywhere - because they +don't block on each other (and thus there is no dead-lock wrt interrupts. +But when you do the write-lock, you have to use the irq-safe version. + +For an example of being clever with rw-locks, see the "waitqueue_lock" +handling in kernel/sched.c - nothing ever _changes_ a wait-queue from +within an interrupt, they only read the queue in order to know whom to +wake up. So read-locks are safe (which is good: they are very common +indeed), while write-locks need to protect themselves against interrupts. + + Linus + + |