diff options
author | Anton Altaparmakov <aia21@cantab.net> | 2005-06-30 09:52:20 +0100 |
---|---|---|
committer | Anton Altaparmakov <aia21@cantab.net> | 2005-06-30 09:52:20 +0100 |
commit | c2d9b8387bce8b4a0fd402fab7dc1319d11a418d (patch) | |
tree | 082cf7dd287f61635198011e61c3de1be130cc42 /Documentation | |
parent | 2a322e4c08be4e7cb0c04b427ddaaa679fd88863 (diff) | |
parent | 9b4311eedb17fa88f02e4876cd6aa9a08e383cd6 (diff) | |
download | kernel_samsung_tuna-c2d9b8387bce8b4a0fd402fab7dc1319d11a418d.zip kernel_samsung_tuna-c2d9b8387bce8b4a0fd402fab7dc1319d11a418d.tar.gz kernel_samsung_tuna-c2d9b8387bce8b4a0fd402fab7dc1319d11a418d.tar.bz2 |
Automerge with /usr/src/ntfs-2.6.git.
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/Changes | 24 | ||||
-rw-r--r-- | Documentation/DocBook/libata.tmpl | 96 | ||||
-rw-r--r-- | Documentation/SubmittingDrivers | 14 | ||||
-rw-r--r-- | Documentation/SubmittingPatches | 44 | ||||
-rw-r--r-- | Documentation/block/ioprio.txt | 176 | ||||
-rw-r--r-- | Documentation/cciss.txt | 1 | ||||
-rw-r--r-- | Documentation/kernel-parameters.txt | 17 | ||||
-rw-r--r-- | Documentation/networking/dmfe.txt | 82 | ||||
-rw-r--r-- | Documentation/pcmcia/devicetable.txt | 64 | ||||
-rw-r--r-- | Documentation/pcmcia/driver-changes.txt | 51 | ||||
-rw-r--r-- | Documentation/serial/driver | 4 | ||||
-rw-r--r-- | Documentation/video4linux/API.html | 415 | ||||
-rw-r--r-- | Documentation/video4linux/CARDLIST.cx88 | 8 | ||||
-rw-r--r-- | Documentation/video4linux/CARDLIST.saa7134 | 6 | ||||
-rw-r--r-- | Documentation/video4linux/CARDLIST.tuner | 3 | ||||
-rw-r--r-- | Documentation/video4linux/README.saa7134 | 9 |
16 files changed, 540 insertions, 474 deletions
diff --git a/Documentation/Changes b/Documentation/Changes index b376007..afebdbc 100644 --- a/Documentation/Changes +++ b/Documentation/Changes @@ -44,9 +44,9 @@ running, the suggested command should tell you. Again, keep in mind that this list assumes you are already functionally running a Linux 2.4 kernel. Also, not all tools are -necessary on all systems; obviously, if you don't have any PCMCIA (PC -Card) hardware, for example, you probably needn't concern yourself -with pcmcia-cs. +necessary on all systems; obviously, if you don't have any ISDN +hardware, for example, you probably needn't concern yourself with +isdn4k-utils. o Gnu C 2.95.3 # gcc --version o Gnu make 3.79.1 # make --version @@ -57,6 +57,7 @@ o e2fsprogs 1.29 # tune2fs o jfsutils 1.1.3 # fsck.jfs -V o reiserfsprogs 3.6.3 # reiserfsck -V 2>&1|grep reiserfsprogs o xfsprogs 2.6.0 # xfs_db -V +o pcmciautils 001 o pcmcia-cs 3.1.21 # cardmgr -V o quota-tools 3.09 # quota -V o PPP 2.4.0 # pppd --version @@ -186,13 +187,20 @@ architecture independent and any version from 2.0.0 onward should work correctly with this version of the XFS kernel code (2.6.0 or later is recommended, due to some significant improvements). +PCMCIAutils +----------- + +PCMCIAutils replaces pcmcia-cs (see below). It properly sets up +PCMCIA sockets at system startup and loads the appropriate modules +for 16-bit PCMCIA devices if the kernel is modularized and the hotplug +subsystem is used. Pcmcia-cs --------- PCMCIA (PC Card) support is now partially implemented in the main -kernel source. Pay attention when you recompile your kernel ;-). -Also, be sure to upgrade to the latest pcmcia-cs release. +kernel source. The "pcmciautils" package (see above) replaces pcmcia-cs +for newest kernels. Quota-tools ----------- @@ -349,9 +357,13 @@ Xfsprogs -------- o <ftp://oss.sgi.com/projects/xfs/download/> +Pcmciautils +----------- +o <ftp://ftp.kernel.org/pub/linux/utils/kernel/pcmcia/> + Pcmcia-cs --------- -o <ftp://pcmcia-cs.sourceforge.net/pub/pcmcia-cs/pcmcia-cs-3.1.21.tar.gz> +o <http://pcmcia-cs.sourceforge.net/> Quota-tools ---------- diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 6df1dfd..375ae76 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -84,6 +84,14 @@ void (*port_disable) (struct ata_port *); Called from ata_bus_probe() and ata_bus_reset() error paths, as well as when unregistering from the SCSI module (rmmod, hot unplug). + This function should do whatever needs to be done to take the + port out of use. In most cases, ata_port_disable() can be used + as this hook. + </para> + <para> + Called from ata_bus_probe() on a failed probe. + Called from ata_bus_reset() on a failed bus reset. + Called from ata_scsi_release(). </para> </sect2> @@ -98,6 +106,13 @@ void (*dev_config) (struct ata_port *, struct ata_device *); found. Typically used to apply device-specific fixups prior to issue of SET FEATURES - XFER MODE, and prior to operation. </para> + <para> + Called by ata_device_add() after ata_dev_identify() determines + a device is present. + </para> + <para> + This entry may be specified as NULL in ata_port_operations. + </para> </sect2> @@ -135,6 +150,8 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); registers / DMA buffers. ->tf_read() is called to read the hardware registers / DMA buffers, to obtain the current set of taskfile register values. + Most drivers for taskfile-based hardware (PIO or MMIO) use + ata_tf_load() and ata_tf_read() for these hooks. </para> </sect2> @@ -147,6 +164,8 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); <para> causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. + Most drivers for taskfile-based hardware use ata_exec_command() + for this hook. </para> </sect2> @@ -161,6 +180,10 @@ Allow low-level driver to filter ATA PACKET commands, returning a status indicating whether or not it is OK to use DMA for the supplied PACKET command. </para> + <para> + This hook may be specified as NULL, in which case libata will + assume that atapi dma can be supported. + </para> </sect2> @@ -175,6 +198,14 @@ u8 (*check_err)(struct ata_port *ap); Reads the Status/AltStatus/Error ATA shadow register from hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. + Most drivers for taskfile-based hardware use + ata_check_status() for this hook. + </para> + <para> + Note that because this is called from ata_device_add(), at + least a dummy function that clears device interrupts must be + provided for all drivers, even if the controller doesn't + actually have a taskfile status register. </para> </sect2> @@ -188,7 +219,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Issues the low-level hardware command(s) that causes one of N hardware devices to be considered 'selected' (active and available for use) on the ATA bus. This generally has no -meaning on FIS-based devices. + meaning on FIS-based devices. + </para> + <para> + Most drivers for taskfile-based hardware use + ata_std_dev_select() for this hook. Controllers which do not + support second drives on a port (such as SATA contollers) will + use ata_noop_dev_select(). </para> </sect2> @@ -204,6 +241,8 @@ void (*phy_reset) (struct ata_port *ap); for device presence (PATA and SATA), typically a soft reset (SRST) will be performed. Drivers typically use the helper functions ata_bus_reset() or sata_phy_reset() for this hook. + Many SATA drivers use sata_phy_reset() or call it from within + their own phy_reset() functions. </para> </sect2> @@ -227,6 +266,25 @@ PCI IDE DMA Status register. These hooks are typically either no-ops, or simply not implemented, in FIS-based drivers. </para> + <para> +Most legacy IDE drivers use ata_bmdma_setup() for the bmdma_setup() +hook. ata_bmdma_setup() will write the pointer to the PRD table to +the IDE PRD Table Address register, enable DMA in the DMA Command +register, and call exec_command() to begin the transfer. + </para> + <para> +Most legacy IDE drivers use ata_bmdma_start() for the bmdma_start() +hook. ata_bmdma_start() will write the ATA_DMA_START flag to the DMA +Command register. + </para> + <para> +Many legacy IDE drivers use ata_bmdma_stop() for the bmdma_stop() +hook. ata_bmdma_stop() clears the ATA_DMA_START flag in the DMA +command register. + </para> + <para> +Many legacy IDE drivers use ata_bmdma_status() as the bmdma_status() hook. + </para> </sect2> @@ -250,6 +308,10 @@ int (*qc_issue) (struct ata_queued_cmd *qc); helper function ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced drivers implement their own ->qc_issue. </para> + <para> + ata_qc_issue_prot() calls ->tf_load(), ->bmdma_setup(), and + ->bmdma_start() as necessary to initiate a transfer. + </para> </sect2> @@ -279,6 +341,21 @@ void (*irq_clear) (struct ata_port *); before the interrupt handler is registered, to be sure hardware is quiet. </para> + <para> + The second argument, dev_instance, should be cast to a pointer + to struct ata_host_set. + </para> + <para> + Most legacy IDE drivers use ata_interrupt() for the + irq_handler hook, which scans all ports in the host_set, + determines which queued command was active (if any), and calls + ata_host_intr(ap,qc). + </para> + <para> + Most legacy IDE drivers use ata_bmdma_irq_clear() for the + irq_clear() hook, which simply clears the interrupt and error + flags in the DMA status register. + </para> </sect2> @@ -292,6 +369,7 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, <para> Read and write standard SATA phy registers. Currently only used if ->phy_reset hook called the sata_phy_reset() helper function. + sc_reg is one of SCR_STATUS, SCR_CONTROL, SCR_ERROR, or SCR_ACTIVE. </para> </sect2> @@ -307,17 +385,29 @@ void (*host_stop) (struct ata_host_set *host_set); ->port_start() is called just after the data structures for each port are initialized. Typically this is used to alloc per-port DMA buffers / tables / rings, enable DMA engines, and similar - tasks. + tasks. Some drivers also use this entry point as a chance to + allocate driver-private memory for ap->private_data. + </para> + <para> + Many drivers use ata_port_start() as this hook or call + it from their own port_start() hooks. ata_port_start() + allocates space for a legacy IDE PRD table and returns. </para> <para> ->port_stop() is called after ->host_stop(). It's sole function is to release DMA/memory resources, now that they are no longer - actively being used. + actively being used. Many drivers also free driver-private + data from port at this time. + </para> + <para> + Many drivers use ata_port_stop() as this hook, which frees the + PRD table. </para> <para> ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. + This hook may be specified as NULL, in which case it is not called. </para> </sect2> diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers index de3b252..c3cca92 100644 --- a/Documentation/SubmittingDrivers +++ b/Documentation/SubmittingDrivers @@ -13,13 +13,14 @@ Allocating Device Numbers ------------------------- Major and minor numbers for block and character devices are allocated -by the Linux assigned name and number authority (currently better -known as H Peter Anvin). The site is http://www.lanana.org/. This +by the Linux assigned name and number authority (currently this is +Torben Mathiasen). The site is http://www.lanana.org/. This also deals with allocating numbers for devices that are not going to be submitted to the mainstream kernel. +See Documentation/devices.txt for more information on this. -If you don't use assigned numbers then when you device is submitted it will -get given an assigned number even if that is different from values you may +If you don't use assigned numbers then when your device is submitted it will +be given an assigned number even if that is different from values you may have shipped to customers before. Who To Submit Drivers To @@ -32,7 +33,8 @@ Linux 2.2: If the code area has a general maintainer then please submit it to the maintainer listed in MAINTAINERS in the kernel file. If the maintainer does not respond or you cannot find the appropriate - maintainer then please contact Alan Cox <alan@lxorguk.ukuu.org.uk> + maintainer then please contact the 2.2 kernel maintainer: + Marc-Christian Petersen <m.c.p@wolk-project.de>. Linux 2.4: The same rules apply as 2.2. The final contact point for Linux 2.4 @@ -48,7 +50,7 @@ What Criteria Determine Acceptance Licensing: The code must be released to us under the GNU General Public License. We don't insist on any kind - of exclusively GPL licensing, and if you wish the driver + of exclusive GPL licensing, and if you wish the driver to be useful to other communities such as BSD you may well wish to release under multiple licenses. diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 4d1f41b..6761a7b 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -35,7 +35,7 @@ not in any lower subdirectory. To create a patch for a single file, it is often sufficient to do: - SRCTREE= linux-2.4 + SRCTREE= linux-2.6 MYFILE= drivers/net/mydriver.c cd $SRCTREE @@ -48,17 +48,18 @@ To create a patch for multiple files, you should unpack a "vanilla", or unmodified kernel source tree, and generate a diff against your own source tree. For example: - MYSRC= /devel/linux-2.4 + MYSRC= /devel/linux-2.6 - tar xvfz linux-2.4.0-test11.tar.gz - mv linux linux-vanilla - wget http://www.moses.uklinux.net/patches/dontdiff - diff -uprN -X dontdiff linux-vanilla $MYSRC > /tmp/patch - rm -f dontdiff + tar xvfz linux-2.6.12.tar.gz + mv linux-2.6.12 linux-2.6.12-vanilla + diff -uprN -X linux-2.6.12-vanilla/Documentation/dontdiff \ + linux-2.6.12-vanilla $MYSRC > /tmp/patch "dontdiff" is a list of files which are generated by the kernel during the build process, and should be ignored in any diff(1)-generated -patch. dontdiff is maintained by Tigran Aivazian <tigran@veritas.com> +patch. The "dontdiff" file is included in the kernel tree in +2.6.12 and later. For earlier kernel versions, you can get it +from <http://www.xenotime.net/linux/doc/dontdiff>. Make sure your patch does not include any extra files which do not belong in a patch submission. Make sure to review your patch -after- @@ -66,18 +67,20 @@ generated it with diff(1), to ensure accuracy. If your changes produce a lot of deltas, you may want to look into splitting them into individual patches which modify things in -logical stages, this will facilitate easier reviewing by other +logical stages. This will facilitate easier reviewing by other kernel developers, very important if you want your patch accepted. -There are a number of scripts which can aid in this; +There are a number of scripts which can aid in this: Quilt: http://savannah.nongnu.org/projects/quilt Randy Dunlap's patch scripts: -http://developer.osdl.org/rddunlap/scripts/patching-scripts.tgz +http://www.xenotime.net/linux/scripts/patching-scripts-002.tar.gz Andrew Morton's patch scripts: -http://www.zip.com.au/~akpm/linux/patches/patch-scripts-0.16 +http://www.zip.com.au/~akpm/linux/patches/patch-scripts-0.20 + + 2) Describe your changes. @@ -163,6 +166,8 @@ patches. Trivial patches must qualify for one of the following rules: since people copy, as long as it's trivial) Any fix by the author/maintainer of the file. (ie. patch monkey in re-transmission mode) +URL: <http://www.kernel.org/pub/linux/kernel/people/rusty/trivial/> + @@ -291,6 +296,17 @@ now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. + +12) More references for submitting patches + +Andrew Morton, "The perfect patch" (tpp). + <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt> + +Jeff Garzik, "Linux kernel patch submission format." + <http://linux.yyz.us/patch-format.html> + + + ----------------------------------- SECTION 2 - HINTS, TIPS, AND TRICKS ----------------------------------- @@ -359,7 +375,5 @@ and 'extern __inline__'. 4) Don't over-design. Don't try to anticipate nebulous future cases which may or may not -be useful: "Make it as simple as you can, and no simpler" - - +be useful: "Make it as simple as you can, and no simpler." diff --git a/Documentation/block/ioprio.txt b/Documentation/block/ioprio.txt new file mode 100644 index 0000000..96ccf68 --- /dev/null +++ b/Documentation/block/ioprio.txt @@ -0,0 +1,176 @@ +Block io priorities +=================== + + +Intro +----- + +With the introduction of cfq v3 (aka cfq-ts or time sliced cfq), basic io +priorities is supported for reads on files. This enables users to io nice +processes or process groups, similar to what has been possible to cpu +scheduling for ages. This document mainly details the current possibilites +with cfq, other io schedulers do not support io priorities so far. + +Scheduling classes +------------------ + +CFQ implements three generic scheduling classes that determine how io is +served for a process. + +IOPRIO_CLASS_RT: This is the realtime io class. This scheduling class is given +higher priority than any other in the system, processes from this class are +given first access to the disk every time. Thus it needs to be used with some +care, one io RT process can starve the entire system. Within the RT class, +there are 8 levels of class data that determine exactly how much time this +process needs the disk for on each service. In the future this might change +to be more directly mappable to performance, by passing in a wanted data +rate instead. + +IOPRIO_CLASS_BE: This is the best-effort scheduling class, which is the default +for any process that hasn't set a specific io priority. The class data +determines how much io bandwidth the process will get, it's directly mappable +to the cpu nice levels just more coarsely implemented. 0 is the highest +BE prio level, 7 is the lowest. The mapping between cpu nice level and io +nice level is determined as: io_nice = (cpu_nice + 20) / 5. + +IOPRIO_CLASS_IDLE: This is the idle scheduling class, processes running at this +level only get io time when no one else needs the disk. The idle class has no +class data, since it doesn't really apply here. + +Tools +----- + +See below for a sample ionice tool. Usage: + +# ionice -c<class> -n<level> -p<pid> + +If pid isn't given, the current process is assumed. IO priority settings +are inherited on fork, so you can use ionice to start the process at a given +level: + +# ionice -c2 -n0 /bin/ls + +will run ls at the best-effort scheduling class at the highest priority. +For a running process, you can give the pid instead: + +# ionice -c1 -n2 -p100 + +will change pid 100 to run at the realtime scheduling class, at priority 2. + +---> snip ionice.c tool <--- + +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <getopt.h> +#include <unistd.h> +#include <sys/ptrace.h> +#include <asm/unistd.h> + +extern int sys_ioprio_set(int, int, int); +extern int sys_ioprio_get(int, int); + +#if defined(__i386__) +#define __NR_ioprio_set 289 +#define __NR_ioprio_get 290 +#elif defined(__ppc__) +#define __NR_ioprio_set 273 +#define __NR_ioprio_get 274 +#elif defined(__x86_64__) +#define __NR_ioprio_set 251 +#define __NR_ioprio_get 252 +#elif defined(__ia64__) +#define __NR_ioprio_set 1274 +#define __NR_ioprio_get 1275 +#else +#error "Unsupported arch" +#endif + +_syscall3(int, ioprio_set, int, which, int, who, int, ioprio); +_syscall2(int, ioprio_get, int, which, int, who); + +enum { + IOPRIO_CLASS_NONE, + IOPRIO_CLASS_RT, + IOPRIO_CLASS_BE, + IOPRIO_CLASS_IDLE, +}; + +enum { + IOPRIO_WHO_PROCESS = 1, + IOPRIO_WHO_PGRP, + IOPRIO_WHO_USER, +}; + +#define IOPRIO_CLASS_SHIFT 13 + +const char *to_prio[] = { "none", "realtime", "best-effort", "idle", }; + +int main(int argc, char *argv[]) +{ + int ioprio = 4, set = 0, ioprio_class = IOPRIO_CLASS_BE; + int c, pid = 0; + + while ((c = getopt(argc, argv, "+n:c:p:")) != EOF) { + switch (c) { + case 'n': + ioprio = strtol(optarg, NULL, 10); + set = 1; + break; + case 'c': + ioprio_class = strtol(optarg, NULL, 10); + set = 1; + break; + case 'p': + pid = strtol(optarg, NULL, 10); + break; + } + } + + switch (ioprio_class) { + case IOPRIO_CLASS_NONE: + ioprio_class = IOPRIO_CLASS_BE; + break; + case IOPRIO_CLASS_RT: + case IOPRIO_CLASS_BE: + break; + case IOPRIO_CLASS_IDLE: + ioprio = 7; + break; + default: + printf("bad prio class %d\n", ioprio_class); + return 1; + } + + if (!set) { + if (!pid && argv[optind]) + pid = strtol(argv[optind], NULL, 10); + + ioprio = ioprio_get(IOPRIO_WHO_PROCESS, pid); + + printf("pid=%d, %d\n", pid, ioprio); + + if (ioprio == -1) + perror("ioprio_get"); + else { + ioprio_class = ioprio >> IOPRIO_CLASS_SHIFT; + ioprio = ioprio & 0xff; + printf("%s: prio %d\n", to_prio[ioprio_class], ioprio); + } + } else { + if (ioprio_set(IOPRIO_WHO_PROCESS, pid, ioprio | ioprio_class << IOPRIO_CLASS_SHIFT) == -1) { + perror("ioprio_set"); + return 1; + } + + if (argv[optind]) + execvp(argv[optind], &argv[optind]); + } + + return 0; +} + +---> snip ionice.c tool <--- + + +March 11 2005, Jens Axboe <axboe@suse.de> diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index d599beb..c8f9a73 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -17,6 +17,7 @@ This driver is known to work with the following cards: * SA P600 * SA P800 * SA E400 + * SA E300 If nodes are not already created in the /dev/cciss directory, run as root: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index f44bb55..4ec75c0 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -622,6 +622,17 @@ running once the system is up. ips= [HW,SCSI] Adaptec / IBM ServeRAID controller See header of drivers/scsi/ips.c. + irqfixup [HW] + When an interrupt is not handled search all handlers + for it. Intended to get systems with badly broken + firmware running. + + irqpoll [HW] + When an interrupt is not handled search all handlers + for it. Also check all handlers each timer + interrupt. Intended to get systems with badly broken + firmware running. + isapnp= [ISAPNP] Format: <RDP>, <reset>, <pci_scan>, <verbosity> @@ -1030,6 +1041,10 @@ running once the system is up. irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be assigned automatically to PCI devices. You can make the kernel exclude IRQs of your ISA cards this way. + pirqaddr=0xAAAAA [IA-32] Specify the physical address + of the PIRQ table (normally generated + by the BIOS) if it is outside the + F0000h-100000h range. lastbus=N [IA-32] Scan all buses till bus #N. Can be useful if the kernel is unable to find your secondary buses and you want to tell it explicitly which ones they are. @@ -1115,7 +1130,7 @@ running once the system is up. See Documentation/ramdisk.txt. psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to - probe for (bare|imps|exps). + probe for (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports per second. psmouse.resetafter= diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt index c0e8398..0463635 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/dmfe.txt @@ -1,59 +1,65 @@ - dmfe.c: Version 1.28 01/18/2000 +Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. - A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. - Copyright (C) 1997 Sten Wang +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version 2 - of the License, or (at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. +This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET +10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you +didn't compile this driver as a module, it will automatically load itself on boot and print a +line similar to : - A. Compiler command: + dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) - A-1: For normal single or multiple processor kernel - "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall - -Wstrict-prototypes -O6 -c dmfe.c" +If you compiled this driver as a module, you have to load it on boot.You can load it with command : - A-2: For single or multiple processor with kernel module version function - "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet - -Wall -Wstrict-prototypes -O6 -c dmfe.c" + insmod dmfe +This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass +a mode= setting to module while loading, like : - B. The following steps teach you how to activate a DM9102 board: + insmod dmfe mode=0 # Force 10M Half Duplex + insmod dmfe mode=1 # Force 100M Half Duplex + insmod dmfe mode=4 # Force 10M Full Duplex + insmod dmfe mode=5 # Force 100M Full Duplex - 1. Used the upper compiler command to compile dmfe.c +Next you should configure your network interface with a command similar to : - 2. Insert dmfe module into kernel - "insmod dmfe" ;;Auto Detection Mode (Suggest) - "insmod dmfe mode=0" ;;Force 10M Half Duplex - "insmod dmfe mode=1" ;;Force 100M Half Duplex - "insmod dmfe mode=4" ;;Force 10M Full Duplex - "insmod dmfe mode=5" ;;Force 100M Full Duplex + ifconfig eth0 172.22.3.18 + ^^^^^^^^^^^ + Your IP Adress - 3. Config a dm9102 network interface - "ifconfig eth0 172.22.3.18" - ^^^^^^^^^^^ Your IP address +Then you may have to modify the default routing table with command : - 4. Activate the IP routing table. For some distributions, it is not - necessary. You can type "route" to check. + route add default eth0 - "route add default eth0" +Now your ethernet card should be up and running. - 5. Well done. Your DM9102 adapter is now activated. +TODO: - C. Object files description: - 1. dmfe_rh61.o: For Redhat 6.1 +Implement pci_driver::suspend() and pci_driver::resume() power management methods. +Check on 64 bit boxes. +Check and fix on big endian boxes. +Test and make sure PCI latency is now correct for all cases. - If you can make sure your kernel version, you can rename - to dmfe.o and directly use it without re-compiling. +Authors: - Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw +Sten Wang <sten_wang@davicom.com.tw > : Original Author +Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer + +Contributors: + +Marcelo Tosatti <marcelo@conectiva.com.br> +Alan Cox <alan@redhat.com> +Jeff Garzik <jgarzik@pobox.com> +Vojtech Pavlik <vojtech@suse.cz> diff --git a/Documentation/pcmcia/devicetable.txt b/Documentation/pcmcia/devicetable.txt new file mode 100644 index 0000000..045511a --- /dev/null +++ b/Documentation/pcmcia/devicetable.txt @@ -0,0 +1,64 @@ +Matching of PCMCIA devices to drivers is done using one or more of the +following criteria: + +- manufactor ID +- card ID +- product ID strings _and_ hashes of these strings +- function ID +- device function (actual and pseudo) + +You should use the helpers in include/pcmcia/device_id.h for generating the +struct pcmcia_device_id[] entries which match devices to drivers. + +If you want to match product ID strings, you also need to pass the crc32 +hashes of the string to the macro, e.g. if you want to match the product ID +string 1, you need to use + +PCMCIA_DEVICE_PROD_ID1("some_string", 0x(hash_of_some_string)), + +If the hash is incorrect, the kernel will inform you about this in "dmesg" +upon module initialization, and tell you of the correct hash. + +You can determine the hash of the product ID strings by running +"pcmcia-modalias %n.%m" [%n being replaced with the socket number and %m being +replaced with the device function] from pcmciautils. It generates a string +in the following form: +pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000 + +The hex value after "pa" is the hash of product ID string 1, after "pb" for +string 2 and so on. + +Alternatively, you can use this small tool to determine the crc32 hash. +simply pass the string you want to evaluate as argument to this program, +e.g. +$ ./crc32hash "Dual Speed" + +------------------------------------------------------------------------- +/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */ +#include <string.h> +#include <stdio.h> +#include <ctype.h> +#include <stdlib.h> + +unsigned int crc32(unsigned char const *p, unsigned int len) +{ + int i; + unsigned int crc = 0; + while (len--) { + crc ^= *p++; + for (i = 0; i < 8; i++) + crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0); + } + return crc; +} + +int main(int argc, char **argv) { + unsigned int result; + if (argc != 2) { + printf("no string passed as argument\n"); + return -1; + } + result = crc32(argv[1], strlen(argv[1])); + printf("0x%x\n", result); + return 0; +} diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt new file mode 100644 index 0000000..9c315ab --- /dev/null +++ b/Documentation/pcmcia/driver-changes.txt @@ -0,0 +1,51 @@ +This file details changes in 2.6 which affect PCMCIA card driver authors: + +* in-kernel device<->driver matching + PCMCIA devices and their correct drivers can now be matched in + kernelspace. See 'devicetable.txt' for details. + +* Device model integration (as of 2.6.11) + A struct pcmcia_device is registered with the device model core, + and can be used (e.g. for SET_NETDEV_DEV) by using + handle_to_dev(client_handle_t * handle). + +* Convert internal I/O port addresses to unsigned long (as of 2.6.11) + ioaddr_t should be replaced by kio_addr_t in PCMCIA card drivers. + +* irq_mask and irq_list parameters (as of 2.6.11) + The irq_mask and irq_list parameters should no longer be used in + PCMCIA card drivers. Instead, it is the job of the PCMCIA core to + determine which IRQ should be used. Therefore, link->irq.IRQInfo2 + is ignored. + +* client->PendingEvents is gone (as of 2.6.11) + client->PendingEvents is no longer available. + +* client->Attributes are gone (as of 2.6.11) + client->Attributes is unused, therefore it is removed from all + PCMCIA card drivers + +* core functions no longer available (as of 2.6.11) + The following functions have been removed from the kernel source + because they are unused by all in-kernel drivers, and no external + driver was reported to rely on them: + pcmcia_get_first_region() + pcmcia_get_next_region() + pcmcia_modify_window() + pcmcia_set_event_mask() + pcmcia_get_first_window() + pcmcia_get_next_window() + +* device list iteration upon module removal (as of 2.6.10) + It is no longer necessary to iterate on the driver's internal + client list and call the ->detach() function upon module removal. + +* Resource management. (as of 2.6.8) + Although the PCMCIA subsystem will allocate resources for cards, + it no longer marks these resources busy. This means that driver + authors are now responsible for claiming your resources as per + other drivers in Linux. You should use request_region() to mark + your IO regions in-use, and request_mem_region() to mark your + memory regions in-use. The name argument should be a pointer to + your driver name. Eg, for pcnet_cs, name should point to the + string "pcnet_cs". diff --git a/Documentation/serial/driver b/Documentation/serial/driver index e9c0178..ac7eabb 100644 --- a/Documentation/serial/driver +++ b/Documentation/serial/driver @@ -107,8 +107,8 @@ hardware. indicate that the signal is permanently active. If RI is not available, the signal should not be indicated as active. - Locking: none. - Interrupts: caller dependent. + Locking: port->lock taken. + Interrupts: locally disabled. This call must not sleep stop_tx(port,tty_stop) diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html index 4b3d8f6..441407b 100644 --- a/Documentation/video4linux/API.html +++ b/Documentation/video4linux/API.html @@ -1,399 +1,16 @@ -<HTML><HEAD> -<TITLE>Video4Linux Kernel API Reference v0.1:19990430</TITLE> -</HEAD> -<! Revision History: > -<! 4/30/1999 - Fred Gleason (fredg@wava.com)> -<! Documented extensions for the Radio Data System (RDS) extensions > -<BODY bgcolor="#ffffff"> -<H3>Devices</H3> -Video4Linux provides the following sets of device files. These live on the -character device formerly known as "/dev/bttv". /dev/bttv should be a -symlink to /dev/video0 for most people. -<P> -<TABLE> -<TR><TH>Device Name</TH><TH>Minor Range</TH><TH>Function</TH> -<TR><TD>/dev/video</TD><TD>0-63</TD><TD>Video Capture Interface</TD> -<TR><TD>/dev/radio</TD><TD>64-127</TD><TD>AM/FM Radio Devices</TD> -<TR><TD>/dev/vtx</TD><TD>192-223</TD><TD>Teletext Interface Chips</TD> -<TR><TD>/dev/vbi</TD><TD>224-239</TD><TD>Raw VBI Data (Intercast/teletext)</TD> -</TABLE> -<P> -Video4Linux programs open and scan the devices to find what they are looking -for. Capability queries define what each interface supports. The -described API is only defined for video capture cards. The relevant subset -applies to radio cards. Teletext interfaces talk the existing VTX API. -<P> -<H3>Capability Query Ioctl</H3> -The <B>VIDIOCGCAP</B> ioctl call is used to obtain the capability -information for a video device. The <b>struct video_capability</b> object -passed to the ioctl is completed and returned. It contains the following -information -<P> -<TABLE> -<TR><TD><b>name[32]</b><TD>Canonical name for this interface</TD> -<TR><TD><b>type</b><TD>Type of interface</TD> -<TR><TD><b>channels</b><TD>Number of radio/tv channels if appropriate</TD> -<TR><TD><b>audios</b><TD>Number of audio devices if appropriate</TD> -<TR><TD><b>maxwidth</b><TD>Maximum capture width in pixels</TD> -<TR><TD><b>maxheight</b><TD>Maximum capture height in pixels</TD> -<TR><TD><b>minwidth</b><TD>Minimum capture width in pixels</TD> -<TR><TD><b>minheight</b><TD>Minimum capture height in pixels</TD> -</TABLE> -<P> -The type field lists the capability flags for the device. These are -as follows -<P> -<TABLE> -<TR><TH>Name</TH><TH>Description</TH> -<TR><TD><b>VID_TYPE_CAPTURE</b><TD>Can capture to memory</TD> -<TR><TD><b>VID_TYPE_TUNER</b><TD>Has a tuner of some form</TD> -<TR><TD><b>VID_TYPE_TELETEXT</b><TD>Has teletext capability</TD> -<TR><TD><b>VID_TYPE_OVERLAY</b><TD>Can overlay its image onto the frame buffer</TD> -<TR><TD><b>VID_TYPE_CHROMAKEY</b><TD>Overlay is Chromakeyed</TD> -<TR><TD><b>VID_TYPE_CLIPPING</b><TD>Overlay clipping is supported</TD> -<TR><TD><b>VID_TYPE_FRAMERAM</b><TD>Overlay overwrites frame buffer memory</TD> -<TR><TD><b>VID_TYPE_SCALES</b><TD>The hardware supports image scaling</TD> -<TR><TD><b>VID_TYPE_MONOCHROME</b><TD>Image capture is grey scale only</TD> -<TR><TD><b>VID_TYPE_SUBCAPTURE</b><TD>Capture can be of only part of the image</TD> -</TABLE> -<P> -The minimum and maximum sizes listed for a capture device do not imply all -that all height/width ratios or sizes within the range are possible. A -request to set a size will be honoured by the largest available capture -size whose capture is no large than the requested rectangle in either -direction. For example the quickcam has 3 fixed settings. -<P> -<H3>Frame Buffer</H3> -Capture cards that drop data directly onto the frame buffer must be told the -base address of the frame buffer, its size and organisation. This is a -privileged ioctl and one that eventually X itself should set. -<P> -The <b>VIDIOCSFBUF</b> ioctl sets the frame buffer parameters for a capture -card. If the card does not do direct writes to the frame buffer then this -ioctl will be unsupported. The <b>VIDIOCGFBUF</b> ioctl returns the -currently used parameters. The structure used in both cases is a -<b>struct video_buffer</b>. -<P> -<TABLE> -<TR><TD><b>void *base</b></TD><TD>Base physical address of the buffer</TD> -<TR><TD><b>int height</b></TD><TD>Height of the frame buffer</TD> -<TR><TD><b>int width</b></TD><TD>Width of the frame buffer</TD> -<TR><TD><b>int depth</b></TD><TD>Depth of the frame buffer</TD> -<TR><TD><b>int bytesperline</b></TD><TD>Number of bytes of memory between the start of two adjacent lines</TD> -</TABLE> -<P> -Note that these values reflect the physical layout of the frame buffer. -The visible area may be smaller. In fact under XFree86 this is commonly the -case. XFree86 DGA can provide the parameters required to set up this ioctl. -Setting the base address to NULL indicates there is no physical frame buffer -access. -<P> -<H3>Capture Windows</H3> -The capture area is described by a <b>struct video_window</b>. This defines -a capture area and the clipping information if relevant. The -<b>VIDIOCGWIN</b> ioctl recovers the current settings and the -<b>VIDIOCSWIN</b> sets new values. A successful call to <b>VIDIOCSWIN</b> -indicates that a suitable set of parameters have been chosen. They do not -indicate that exactly what was requested was granted. The program should -call <b>VIDIOCGWIN</b> to check if the nearest match was suitable. The -<b>struct video_window</b> contains the following fields. -<P> -<TABLE> -<TR><TD><b>x</b><TD>The X co-ordinate specified in X windows format.</TD> -<TR><TD><b>y</b><TD>The Y co-ordinate specified in X windows format.</TD> -<TR><TD><b>width</b><TD>The width of the image capture.</TD> -<TR><TD><b>height</b><TD>The height of the image capture.</TD> -<TR><TD><b>chromakey</b><TD>A host order RGB32 value for the chroma key.</TD> -<TR><TD><b>flags</b><TD>Additional capture flags.</TD> -<TR><TD><b>clips</b><TD>A list of clipping rectangles. <em>(Set only)</em></TD> -<TR><TD><b>clipcount</b><TD>The number of clipping rectangles. <em>(Set only)</em></TD> -</TABLE> -<P> -Clipping rectangles are passed as an array. Each clip consists of the following -fields available to the user. -<P> -<TABLE> -<TR><TD><b>x</b></TD><TD>X co-ordinate of rectangle to skip</TD> -<TR><TD><b>y</b></TD><TD>Y co-ordinate of rectangle to skip</TD> -<TR><TD><b>width</b></TD><TD>Width of rectangle to skip</TD> -<TR><TD><b>height</b></TD><TD>Height of rectangle to skip</TD> -</TABLE> -<P> -Merely setting the window does not enable capturing. Overlay capturing -(i.e. PCI-PCI transfer to the frame buffer of the video card) -is activated by passing the <b>VIDIOCCAPTURE</b> ioctl a value of 1, and -disabled by passing it a value of 0. -<P> -Some capture devices can capture a subfield of the image they actually see. -This is indicated when VIDEO_TYPE_SUBCAPTURE is defined. -The video_capture describes the time and special subfields to capture. -The video_capture structure contains the following fields. -<P> -<TABLE> -<TR><TD><b>x</b></TD><TD>X co-ordinate of source rectangle to grab</TD> -<TR><TD><b>y</b></TD><TD>Y co-ordinate of source rectangle to grab</TD> -<TR><TD><b>width</b></TD><TD>Width of source rectangle to grab</TD> -<TR><TD><b>height</b></TD><TD>Height of source rectangle to grab</TD> -<TR><TD><b>decimation</b></TD><TD>Decimation to apply</TD> -<TR><TD><b>flags</b></TD><TD>Flag settings for grabbing</TD> -</TABLE> -The available flags are -<P> -<TABLE> -<TR><TH>Name</TH><TH>Description</TH> -<TR><TD><b>VIDEO_CAPTURE_ODD</b><TD>Capture only odd frames</TD> -<TR><TD><b>VIDEO_CAPTURE_EVEN</b><TD>Capture only even frames</TD> -</TABLE> -<P> -<H3>Video Sources</H3> -Each video4linux video or audio device captures from one or more -source <b>channels</b>. Each channel can be queries with the -<b>VDIOCGCHAN</b> ioctl call. Before invoking this function the caller -must set the channel field to the channel that is being queried. On return -the <b>struct video_channel</b> is filled in with information about the -nature of the channel itself. -<P> -The <b>VIDIOCSCHAN</b> ioctl takes an integer argument and switches the -capture to this input. It is not defined whether parameters such as colour -settings or tuning are maintained across a channel switch. The caller should -maintain settings as desired for each channel. (This is reasonable as -different video inputs may have different properties). -<P> -The <b>struct video_channel</b> consists of the following -<P> -<TABLE> -<TR><TD><b>channel</b></TD><TD>The channel number</TD> -<TR><TD><b>name</b></TD><TD>The input name - preferably reflecting the label -on the card input itself</TD> -<TR><TD><b>tuners</b></TD><TD>Number of tuners for this input</TD> -<TR><TD><b>flags</b></TD><TD>Properties the tuner has</TD> -<TR><TD><b>type</b></TD><TD>Input type (if known)</TD> -<TR><TD><b>norm</b><TD>The norm for this channel</TD> -</TABLE> -<P> -The flags defined are -<P> -<TABLE> -<TR><TD><b>VIDEO_VC_TUNER</b><TD>Channel has tuners.</TD> -<TR><TD><b>VIDEO_VC_AUDIO</b><TD>Channel has audio.</TD> -<TR><TD><b>VIDEO_VC_NORM</b><TD>Channel has norm setting.</TD> -</TABLE> -<P> -The types defined are -<P> -<TABLE> -<TR><TD><b>VIDEO_TYPE_TV</b><TD>The input is a TV input.</TD> -<TR><TD><b>VIDEO_TYPE_CAMERA</b><TD>The input is a camera.</TD> -</TABLE> -<P> -<H3>Image Properties</H3> -The image properties of the picture can be queried with the <b>VIDIOCGPICT</b> -ioctl which fills in a <b>struct video_picture</b>. The <b>VIDIOCSPICT</b> -ioctl allows values to be changed. All values except for the palette type -are scaled between 0-65535. -<P> -The <b>struct video_picture</b> consists of the following fields -<P> -<TABLE> -<TR><TD><b>brightness</b><TD>Picture brightness</TD> -<TR><TD><b>hue</b><TD>Picture hue (colour only)</TD> -<TR><TD><b>colour</b><TD>Picture colour (colour only)</TD> -<TR><TD><b>contrast</b><TD>Picture contrast</TD> -<TR><TD><b>whiteness</b><TD>The whiteness (greyscale only)</TD> -<TR><TD><b>depth</b><TD>The capture depth (may need to match the frame buffer depth)</TD> -<TR><TD><b>palette</b><TD>Reports the palette that should be used for this image</TD> -</TABLE> -<P> -The following palettes are defined -<P> -<TABLE> -<TR><TD><b>VIDEO_PALETTE_GREY</b><TD>Linear intensity grey scale (255 is brightest).</TD> -<TR><TD><b>VIDEO_PALETTE_HI240</b><TD>The BT848 8bit colour cube.</TD> -<TR><TD><b>VIDEO_PALETTE_RGB565</b><TD>RGB565 packed into 16 bit words.</TD> -<TR><TD><b>VIDEO_PALETTE_RGB555</b><TD>RGV555 packed into 16 bit words, top bit undefined.</TD> -<TR><TD><b>VIDEO_PALETTE_RGB24</b><TD>RGB888 packed into 24bit words.</TD> -<TR><TD><b>VIDEO_PALETTE_RGB32</b><TD>RGB888 packed into the low 3 bytes of 32bit words. The top 8bits are undefined.</TD> -<TR><TD><b>VIDEO_PALETTE_YUV422</b><TD>Video style YUV422 - 8bits packed 4bits Y 2bits U 2bits V</TD> -<TR><TD><b>VIDEO_PALETTE_YUYV</b><TD>Describe me</TD> -<TR><TD><b>VIDEO_PALETTE_UYVY</b><TD>Describe me</TD> -<TR><TD><b>VIDEO_PALETTE_YUV420</b><TD>YUV420 capture</TD> -<TR><TD><b>VIDEO_PALETTE_YUV411</b><TD>YUV411 capture</TD> -<TR><TD><b>VIDEO_PALETTE_RAW</b><TD>RAW capture (BT848)</TD> -<TR><TD><b>VIDEO_PALETTE_YUV422P</b><TD>YUV 4:2:2 Planar</TD> -<TR><TD><b>VIDEO_PALETTE_YUV411P</b><TD>YUV 4:1:1 Planar</TD> -</TABLE> -<P> -<H3>Tuning</H3> -Each video input channel can have one or more tuners associated with it. Many -devices will not have tuners. TV cards and radio cards will have one or more -tuners attached. -<P> -Tuners are described by a <b>struct video_tuner</b> which can be obtained by -the <b>VIDIOCGTUNER</b> ioctl. Fill in the tuner number in the structure -then pass the structure to the ioctl to have the data filled in. The -tuner can be switched using <b>VIDIOCSTUNER</b> which takes an integer argument -giving the tuner to use. A struct tuner has the following fields -<P> -<TABLE> -<TR><TD><b>tuner</b><TD>Number of the tuner</TD> -<TR><TD><b>name</b><TD>Canonical name for this tuner (eg FM/AM/TV)</TD> -<TR><TD><b>rangelow</b><TD>Lowest tunable frequency</TD> -<TR><TD><b>rangehigh</b><TD>Highest tunable frequency</TD> -<TR><TD><b>flags</b><TD>Flags describing the tuner</TD> -<TR><TD><b>mode</b><TD>The video signal mode if relevant</TD> -<TR><TD><b>signal</b><TD>Signal strength if known - between 0-65535</TD> -</TABLE> -<P> -The following flags exist -<P> -<TABLE> -<TR><TD><b>VIDEO_TUNER_PAL</b><TD>PAL tuning is supported</TD> -<TR><TD><b>VIDEO_TUNER_NTSC</b><TD>NTSC tuning is supported</TD> -<TR><TD><b>VIDEO_TUNER_SECAM</b><TD>SECAM tuning is supported</TD> -<TR><TD><b>VIDEO_TUNER_LOW</b><TD>Frequency is in a lower range</TD> -<TR><TD><b>VIDEO_TUNER_NORM</b><TD>The norm for this tuner is settable</TD> -<TR><TD><b>VIDEO_TUNER_STEREO_ON</b><TD>The tuner is seeing stereo audio</TD> -<TR><TD><b>VIDEO_TUNER_RDS_ON</b><TD>The tuner is seeing a RDS datastream</TD> -<TR><TD><b>VIDEO_TUNER_MBS_ON</b><TD>The tuner is seeing a MBS datastream</TD> -</TABLE> -<P> -The following modes are defined -<P> -<TABLE> -<TR><TD><b>VIDEO_MODE_PAL</b><TD>The tuner is in PAL mode</TD> -<TR><TD><b>VIDEO_MODE_NTSC</b><TD>The tuner is in NTSC mode</TD> -<TR><TD><b>VIDEO_MODE_SECAM</b><TD>The tuner is in SECAM mode</TD> -<TR><TD><b>VIDEO_MODE_AUTO</b><TD>The tuner auto switches, or mode does not apply</TD> -</TABLE> -<P> -Tuning frequencies are an unsigned 32bit value in 1/16th MHz or if the -<b>VIDEO_TUNER_LOW</b> flag is set they are in 1/16th KHz. The current -frequency is obtained as an unsigned long via the <b>VIDIOCGFREQ</b> ioctl and -set by the <b>VIDIOCSFREQ</b> ioctl. -<P> -<H3>Audio</H3> -TV and Radio devices have one or more audio inputs that may be selected. -The audio properties are queried by passing a <b>struct video_audio</b> to <b>VIDIOCGAUDIO</b> ioctl. The -<b>VIDIOCSAUDIO</b> ioctl sets audio properties. -<P> -The structure contains the following fields -<P> -<TABLE> -<TR><TD><b>audio</b><TD>The channel number</TD> -<TR><TD><b>volume</b><TD>The volume level</TD> -<TR><TD><b>bass</b><TD>The bass level</TD> -<TR><TD><b>treble</b><TD>The treble level</TD> -<TR><TD><b>flags</b><TD>Flags describing the audio channel</TD> -<TR><TD><b>name</b><TD>Canonical name for the audio input</TD> -<TR><TD><b>mode</b><TD>The mode the audio input is in</TD> -<TR><TD><b>balance</b><TD>The left/right balance</TD> -<TR><TD><b>step</b><TD>Actual step used by the hardware</TD> -</TABLE> -<P> -The following flags are defined -<P> -<TABLE> -<TR><TD><b>VIDEO_AUDIO_MUTE</b><TD>The audio is muted</TD> -<TR><TD><b>VIDEO_AUDIO_MUTABLE</b><TD>Audio muting is supported</TD> -<TR><TD><b>VIDEO_AUDIO_VOLUME</b><TD>The volume is controllable</TD> -<TR><TD><b>VIDEO_AUDIO_BASS</b><TD>The bass is controllable</TD> -<TR><TD><b>VIDEO_AUDIO_TREBLE</b><TD>The treble is controllable</TD> -<TR><TD><b>VIDEO_AUDIO_BALANCE</b><TD>The balance is controllable</TD> -</TABLE> -<P> -The following decoding modes are defined -<P> -<TABLE> -<TR><TD><b>VIDEO_SOUND_MONO</b><TD>Mono signal</TD> -<TR><TD><b>VIDEO_SOUND_STEREO</b><TD>Stereo signal (NICAM for TV)</TD> -<TR><TD><b>VIDEO_SOUND_LANG1</b><TD>European TV alternate language 1</TD> -<TR><TD><b>VIDEO_SOUND_LANG2</b><TD>European TV alternate language 2</TD> -</TABLE> -<P> -<H3>Reading Images</H3> -Each call to the <b>read</b> syscall returns the next available image -from the device. It is up to the caller to set format and size (using -the VIDIOCSPICT and VIDIOCSWIN ioctls) and then to pass a suitable -size buffer and length to the function. Not all devices will support -read operations. -<P> -A second way to handle image capture is via the mmap interface if supported. -To use the mmap interface a user first sets the desired image size and depth -properties. Next the VIDIOCGMBUF ioctl is issued. This reports the size -of buffer to mmap and the offset within the buffer for each frame. The -number of frames supported is device dependent and may only be one. -<P> -The video_mbuf structure contains the following fields -<P> -<TABLE> -<TR><TD><b>size</b><TD>The number of bytes to map</TD> -<TR><TD><b>frames</b><TD>The number of frames</TD> -<TR><TD><b>offsets</b><TD>The offset of each frame</TD> -</TABLE> -<P> -Once the mmap has been made the VIDIOCMCAPTURE ioctl starts the -capture to a frame using the format and image size specified in the -video_mmap (which should match or be below the initial query size). -When the VIDIOCMCAPTURE ioctl returns the frame is <em>not</em> -captured yet, the driver just instructed the hardware to start the -capture. The application has to use the VIDIOCSYNC ioctl to wait -until the capture of a frame is finished. VIDIOCSYNC takes the frame -number you want to wait for as argument. -<p> -It is allowed to call VIDIOCMCAPTURE multiple times (with different -frame numbers in video_mmap->frame of course) and thus have multiple -outstanding capture requests. A simple way do to double-buffering -using this feature looks like this: -<pre> -/* setup everything */ -VIDIOCMCAPTURE(0) -while (whatever) { - VIDIOCMCAPTURE(1) - VIDIOCSYNC(0) - /* process frame 0 while the hardware captures frame 1 */ - VIDIOCMCAPTURE(0) - VIDIOCSYNC(1) - /* process frame 1 while the hardware captures frame 0 */ -} -</pre> -Note that you are <em>not</em> limited to only two frames. The API -allows up to 32 frames, the VIDIOCGMBUF ioctl returns the number of -frames the driver granted. Thus it is possible to build deeper queues -to avoid loosing frames on load peaks. -<p> -While capturing to memory the driver will make a "best effort" attempt -to capture to screen as well if requested. This normally means all -frames that "miss" memory mapped capture will go to the display. -<P> -A final ioctl exists to allow a device to obtain related devices if a -driver has multiple components (for example video0 may not be associated -with vbi0 which would cause an intercast display program to make a bad -mistake). The VIDIOCGUNIT ioctl reports the unit numbers of the associated -devices if any exist. The video_unit structure has the following fields. -<P> -<TABLE> -<TR><TD><b>video</b><TD>Video capture device</TD> -<TR><TD><b>vbi</b><TD>VBI capture device</TD> -<TR><TD><b>radio</b><TD>Radio device</TD> -<TR><TD><b>audio</b><TD>Audio mixer</TD> -<TR><TD><b>teletext</b><TD>Teletext device</TD> -</TABLE> -<P> -<H3>RDS Datastreams</H3> -For radio devices that support it, it is possible to receive Radio Data -System (RDS) data by means of a read() on the device. The data is packed in -groups of three, as follows: -<TABLE> -<TR><TD>First Octet</TD><TD>Least Significant Byte of RDS Block</TD></TR> -<TR><TD>Second Octet</TD><TD>Most Significant Byte of RDS Block -<TR><TD>Third Octet</TD><TD>Bit 7:</TD><TD>Error bit. Indicates that -an uncorrectable error occurred during reception of this block.</TD></TR> -<TR><TD> </TD><TD>Bit 6:</TD><TD>Corrected bit. Indicates that -an error was corrected for this data block.</TD></TR> -<TR><TD> </TD><TD>Bits 5-3:</TD><TD>Received Offset. Indicates the -offset received by the sync system.</TD></TR> -<TR><TD> </TD><TD>Bits 2-0:</TD><TD>Offset Name. Indicates the -offset applied to this data.</TD></TR> -</TABLE> -</BODY> -</HTML> +<TITLE>V4L API</TITLE> +<H1>Video For Linux APIs</H1> +<table border=0> +<tr> +<td> +<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L1_API.html> +V4L original API</a> +</td><td> +Obsoleted by V4L2 API +</td></tr><tr><td> +<A HREF=http://www.linuxtv.org/downloads/video4linux/API/V4L2_API.html> +V4L2 API</a> +</td><td> +Should be used for new projects +</td></tr> +</table> diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 216f705..4377aa1 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -13,17 +13,17 @@ card=11 - Prolink PlayTV PVR card=12 - ASUS PVR-416 card=13 - MSI TV-@nywhere card=14 - KWorld/VStream XPert DVB-T -card=15 - DVICO FusionHDTV DVB-T1 +card=15 - DViCO FusionHDTV DVB-T1 card=16 - KWorld LTV883RF -card=17 - DViCO - FusionHDTV 3 Gold +card=17 - DViCO FusionHDTV 3 Gold-Q card=18 - Hauppauge Nova-T DVB-T card=19 - Conexant DVB-T reference design card=20 - Provideo PV259 -card=21 - DVICO FusionHDTV DVB-T Plus +card=21 - DViCO FusionHDTV DVB-T Plus card=22 - digitalnow DNTV Live! DVB-T card=23 - pcHDTV HD3000 HDTV card=24 - Hauppauge WinTV 28xxx (Roslyn) models card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC) card=26 - IODATA GV/BCTV7E card=27 - PixelView PlayTV Ultra Pro (Stereo) -card=28 - DViCO - FusionHDTV 3 Gold-T +card=28 - DViCO FusionHDTV 3 Gold-T diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index d5ed95d..735e8ba 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -54,3 +54,9 @@ 55 -> LifeView FlyDVB-T DUO [5168:0306] 56 -> Avermedia AVerTV 307 [1461:a70a] 57 -> Avermedia AVerTV GO 007 FM [1461:f31f] + 58 -> ADS Tech Instant TV (saa7135) [1421:0350,1421:0370] + 59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 + 60 -> Typhoon DVB-T Duo Digital/Analog Cardbus + 61 -> Philips TOUGH DVB-T reference design + 62 -> Compro VideoMate TV Gold+II + 63 -> Kworld Xpert TV PVR7134 diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner index aeb8df8..e78020f 100644 --- a/Documentation/video4linux/CARDLIST.tuner +++ b/Documentation/video4linux/CARDLIST.tuner @@ -59,3 +59,6 @@ tuner=57 - Philips FQ1236A MK4 tuner=58 - Ymec TVision TVF-8531MF tuner=59 - Ymec TVision TVF-5533MF tuner=60 - Thomson DDT 7611 (ATSC/NTSC) +tuner=61 - Tena TNF9533-D/IF +tuner=62 - Philips TEA5767HN FM Radio +tuner=63 - Philips FMD1216ME MK3 Hybrid Tuner diff --git a/Documentation/video4linux/README.saa7134 b/Documentation/video4linux/README.saa7134 index 1a446c6..1f788e4 100644 --- a/Documentation/video4linux/README.saa7134 +++ b/Documentation/video4linux/README.saa7134 @@ -57,6 +57,15 @@ Cards can use either of these two crystals (xtal): - 24.576MHz -> .audio_clock=0x200000 (xtal * .audio_clock = 51539600) +Some details about 30/34/35: + + - saa7130 - low-price chip, doesn't have mute, that is why all those + cards should have .mute field defined in their tuner structure. + + - saa7134 - usual chip + + - saa7133/35 - saa7135 is probably a marketing decision, since all those + chips identifies itself as 33 on pci. Credits ======= |