Add boards from p-android-omap-3.0

Just to keep up with omapzoom.

1 files changed, 847 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
new file mode 100755
index 0000000..9b78cc5
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -0,0 +1,847 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/omapfb.h>
+#include <linux/usb/otg.h>
+#include <linux/hwspinlock.h>
+#include <linux/i2c/twl.h>
+#include <linux/reboot.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
+#include <linux/memblock.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <mach/emif.h>
+#include <mach/lpddr2-elpida.h>
+#include <mach/dmm.h>
+#include <mach/omap4_ion.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <video/omapdss.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include <plat/omap_apps_brd_id.h>
+#include <plat/remoteproc.h>
+#include <plat/vram.h>
+#include <video/omap-panel-generic-dpi.h>
+#include "timer-gp.h"
+
+#include "board-panda.h"
+#include "omap_ram_console.h"
+#include "hsmmc.h"
+#include "control.h"
+#include "mux.h"
+#include "pm.h"
+#include "common-board-devices.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+#define GPIO_HUB_POWER		1
+#define GPIO_HUB_NRESET		62
+#define GPIO_WIFI_PMENA		43
+#define GPIO_WIFI_IRQ		53
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
+#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD  63 /* Hotplug detect */
+#define TPS62361_GPIO   7 /* VCORE1 power control */
+
+/* wl127x BT, FM, GPS connectivity chip */
+static int wl1271_gpios[] = {46, -1, -1};
+static struct platform_device wl1271_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wl1271_gpios,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "pandaboard::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= 7,
+	},
+	{
+		.name			= "pandaboard::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= 8,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct platform_device *panda_devices[] __initdata = {
+	&leds_gpio,
+	&wl1271_device,
+};
+
+static void __init omap4_panda_init_early(void)
+{
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
+}
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.phy_reset  = false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static struct gpio panda_ehci_gpios[] __initdata = {
+	{ GPIO_HUB_POWER,	GPIOF_OUT_INIT_LOW,  "hub_power"  },
+	{ GPIO_HUB_NRESET,	GPIOF_OUT_INIT_LOW,  "hub_nreset" },
+};
+
+static void __init omap4_ehci_init(void)
+{
+	int ret;
+	struct clk *phy_ref_clk;
+
+	/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+	phy_ref_clk = clk_get(NULL, "auxclk3_ck");
+	if (IS_ERR(phy_ref_clk)) {
+		pr_err("Cannot request auxclk3\n");
+		return;
+	}
+	clk_set_rate(phy_ref_clk, 19200000);
+	clk_enable(phy_ref_clk);
+
+	/* disable the power to the usb hub prior to init and reset phy+hub */
+	ret = gpio_request_array(panda_ehci_gpios,
+				 ARRAY_SIZE(panda_ehci_gpios));
+	if (ret) {
+		pr_err("Unable to initialize EHCI power/reset\n");
+		return;
+	}
+
+	gpio_export(GPIO_HUB_POWER, 0);
+	gpio_export(GPIO_HUB_NRESET, 0);
+	gpio_set_value(GPIO_HUB_NRESET, 1);
+
+	usbhs_init(&usbhs_bdata);
+
+	/* enable power to hub */
+	gpio_set_value(GPIO_HUB_POWER, 1);
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+	.mode			= MUSB_PERIPHERAL,
+#else
+	.mode			= MUSB_OTG,
+#endif
+	.power			= 100,
+};
+
+static struct twl4030_usb_data omap4_usbphy_data = {
+	.phy_init	= omap4430_phy_init,
+	.phy_exit	= omap4430_phy_exit,
+	.phy_power	= omap4430_phy_power,
+	.phy_suspend	= omap4430_phy_suspend,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+	},
+	{
+		.name		= "wl1271",
+		.mmc		= 5,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
+		.ocr_mask	= MMC_VDD_165_195,
+		.nonremovable	= true,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "omap_hsmmc.0",
+	},
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
+	.supply = "vmmc",
+	.dev_name = "omap_hsmmc.4",
+};
+
+static struct regulator_init_data panda_vmmc5 = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies = 1,
+	.consumer_supplies = &omap4_panda_vmmc5_supply,
+};
+
+static struct fixed_voltage_config panda_vwlan = {
+	.supply_name = "vwl1271",
+	.microvolts = 1800000, /* 1.8V */
+	.gpio = GPIO_WIFI_PMENA,
+	.startup_delay = 70000, /* 70msec */
+	.enable_high = 1,
+	.enabled_at_boot = 0,
+	.init_data = &panda_vmmc5,
+};
+
+static struct platform_device omap_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &panda_vwlan,
+	},
+};
+
+struct wl12xx_platform_data omap_panda_wlan_data  __initdata = {
+	.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
+	/* PANDA ref clock is 38.4 MHz */
+	.board_ref_clock = 2,
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	if (!pdata) {
+		dev_err(dev, "%s: NULL platform data\n", __func__);
+		return -EINVAL;
+	}
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0) {
+		ret = twl6030_mmc_card_detect_config();
+		 if (ret)
+			dev_err(dev, "%s: Error card detect config(%d)\n",
+				__func__, ret);
+		 else
+			pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+	}
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata;
+
+	/* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+	if (!dev) {
+		pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+		return;
+	}
+	pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_consumer_supply sdp4430_vaux2_supply[] = {
+	REGULATOR_SUPPLY("av-switch", "soc-audio"),
+};
+
+static struct regulator_init_data omap4_panda_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= sdp4430_vaux2_supply,
+};
+
+static struct regulator_init_data omap4_panda_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_panda_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = omap4_panda_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_panda_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_consumer_supply panda_vdac_supply[] = {
+	{
+		.supply = "hdmi_vref",
+	},
+};
+
+static struct regulator_init_data omap4_panda_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(panda_vdac_supply),
+	.consumer_supplies      = panda_vdac_supply,
+};
+
+static struct regulator_init_data omap4_panda_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_clk32kg = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+		.always_on		= true,
+	},
+};
+
+static void omap4_audio_conf(void)
+{
+	/* twl6040 naudint */
+	omap_mux_init_signal("sys_nirq2.sys_nirq2", \
+		OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
+}
+
+static struct twl4030_codec_audio_data twl6040_audio = {
+	/* single-step ramp for headset and handsfree */
+	.hs_left_step	= 0x0f,
+	.hs_right_step	= 0x0f,
+	.hf_left_step	= 0x1d,
+	.hf_right_step	= 0x1d,
+};
+
+static struct twl4030_codec_data twl6040_codec = {
+	.audio		= &twl6040_audio,
+	.audpwron_gpio	= 127,
+	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
+	.irq_base	= TWL6040_CODEC_IRQ_BASE,
+};
+
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &omap4_panda_vmmc,
+	.vpp		= &omap4_panda_vpp,
+	.vana		= &omap4_panda_vana,
+	.vcxio		= &omap4_panda_vcxio,
+	.vdac		= &omap4_panda_vdac,
+	.vusb		= &omap4_panda_vusb,
+	.vaux2		= &omap4_panda_vaux2,
+	.vaux3		= &omap4_panda_vaux3,
+	.clk32kg	= &omap4_panda_clk32kg,
+	.usb		= &omap4_usbphy_data,
+
+	/* children */
+	.codec		= &twl6040_codec,
+};
+
+/*
+ * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
+ * is connected as I2C slave device, and can be accessed at address 0x50
+ */
+static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
+static void __init omap_i2c_hwspinlock_init(int bus_id, int spinlock_id,
+                                struct omap_i2c_bus_board_data *pdata)
+{
+	/* spinlock_id should be -1 for a generic lock request */
+	if (spinlock_id < 0)
+		pdata->handle = hwspin_lock_request();
+	else
+		pdata->handle = hwspin_lock_request_specific(spinlock_id);
+
+	if (pdata->handle != NULL) {
+		pdata->hwspin_lock_timeout = hwspin_lock_timeout;
+		pdata->hwspin_unlock = hwspin_unlock;
+	} else {
+		pr_err("I2C hwspinlock request failed for bus %d\n", \
+								bus_id);
+	}
+}
+
+static struct omap_i2c_bus_board_data __initdata panda_i2c_1_bus_pdata;
+static struct omap_i2c_bus_board_data __initdata panda_i2c_2_bus_pdata;
+static struct omap_i2c_bus_board_data __initdata panda_i2c_3_bus_pdata;
+static struct omap_i2c_bus_board_data __initdata panda_i2c_4_bus_pdata;
+
+
+static int __init omap4_panda_i2c_init(void)
+{
+	omap_i2c_hwspinlock_init(1, 0, &panda_i2c_1_bus_pdata);
+	omap_i2c_hwspinlock_init(2, 1, &panda_i2c_2_bus_pdata);
+	omap_i2c_hwspinlock_init(3, 2, &panda_i2c_3_bus_pdata);
+	omap_i2c_hwspinlock_init(4, 3, &panda_i2c_4_bus_pdata);
+
+	omap_register_i2c_bus_board_data(1, &panda_i2c_1_bus_pdata);
+	omap_register_i2c_bus_board_data(2, &panda_i2c_2_bus_pdata);
+	omap_register_i2c_bus_board_data(3, &panda_i2c_3_bus_pdata);
+	omap_register_i2c_bus_board_data(4, &panda_i2c_4_bus_pdata);
+
+
+	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
+					ARRAY_SIZE(panda_i2c_eeprom));
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 53 */
+	OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	/* WLAN POWER ENABLE - GPIO 43 */
+	OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC5 CMD */
+	OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 CLK */
+	OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC5 DAT[0-3] */
+	OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+	/* gpio 0 - TFP410 PD */
+	OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
+	/* dispc2_data23 */
+	OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data22 */
+	OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data21 */
+	OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data20 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data19 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data18 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data15 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data14 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data13 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data12 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data11 */
+	OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data10 */
+	OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data9 */
+	OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data16 */
+	OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data17 */
+	OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_hsync */
+	OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_pclk */
+	OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_vsync */
+	OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_de */
+	OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data8 */
+	OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data7 */
+	OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data6 */
+	OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data5 */
+	OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data4 */
+	OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data3 */
+	OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data2 */
+	OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data1 */
+	OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	/* dispc2_data0 */
+	OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static inline void __init board_serial_init(void)
+{
+	omap_serial_init();
+}
+#else
+#define board_mux	NULL
+
+static inline void __init board_serial_init(void)
+{
+	omap_serial_init();
+}
+#endif
+
+/* Display DVI */
+#define PANDA_DVI_TFP410_POWER_DOWN_GPIO	0
+
+static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+/* Using generic display panel */
+static struct panel_generic_dpi_data omap4_dvi_panel = {
+	.name			= "generic_720p",
+	.platform_enable	= omap4_panda_enable_dvi,
+	.platform_disable	= omap4_panda_disable_dvi,
+};
+
+struct omap_dss_device omap4_panda_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &omap4_dvi_panel,
+	.phy.dpi.data_lines	= 24,
+	.reset_gpio		= PANDA_DVI_TFP410_POWER_DOWN_GPIO,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+int __init omap4_panda_dvi_init(void)
+{
+	int r;
+
+	/* Requesting TFP410 DVI GPIO and disabling it, at bootup */
+	r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
+				GPIOF_OUT_INIT_LOW, "DVI PD");
+	if (r)
+		pr_err("Failed to get DVI powerdown GPIO\n");
+
+	return r;
+}
+
+static struct gpio panda_hdmi_gpios[] = {
+	{ HDMI_GPIO_CT_CP_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
+	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+};
+
+static void omap4_panda_hdmi_mux_init(void)
+{
+	u32 r;
+	int status;
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd.hdmi_hpd",
+				OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("gpmc_wait2.gpio_100",
+			OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_signal("hdmi_cec.hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl.hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda.hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+
+	/* strong pullup on DDC lines using unpublished register */
+	r = ((1 << 24) | (1 << 28)) ;
+	omap4_ctrl_pad_writel(r, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1);
+
+	gpio_request(HDMI_GPIO_HPD, NULL);
+	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT | OMAP_PULL_ENA);
+	gpio_direction_input(HDMI_GPIO_HPD);
+
+	status = gpio_request_array(panda_hdmi_gpios,
+			ARRAY_SIZE(panda_hdmi_gpios));
+	if (status)
+		pr_err("%s: Cannot request HDMI GPIOs %x \n", __func__, status);
+}
+
+static struct omap_dss_device  omap4_panda_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.clocks	= {
+		.dispc	= {
+			.dispc_fclk_src	= OMAP_DSS_CLK_SRC_FCK,
+		},
+		.hdmi	= {
+			.regn	= 15,
+			.regm2	= 1,
+		},
+	},
+	.hpd_gpio = HDMI_GPIO_HPD,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+};
+
+static struct omap_dss_device *omap4_panda_dss_devices[] = {
+	&omap4_panda_dvi_device,
+	&omap4_panda_hdmi_device,
+};
+
+static struct omap_dss_board_info omap4_panda_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap4_panda_dss_devices),
+	.devices	= omap4_panda_dss_devices,
+	.default_device	= &omap4_panda_dvi_device,
+};
+
+/*
+ * LPDDR2 Configeration Data:
+ * The memory organisation is as below :
+ *	EMIF1 - CS0 -	2 Gb
+ *		CS1 -	2 Gb
+ *	EMIF2 - CS0 -	2 Gb
+ *		CS1 -	2 Gb
+ *	--------------------
+ *	TOTAL -		8 Gb
+ *
+ * Same devices installed on EMIF1 and EMIF2
+ */
+static __initdata struct emif_device_details emif_devices = {
+	.cs0_device = &lpddr2_elpida_2G_S4_dev,
+	.cs1_device = &lpddr2_elpida_2G_S4_dev
+};
+
+void omap4_panda_display_init(void)
+{
+	int r;
+
+	r = omap4_panda_dvi_init();
+	if (r)
+		pr_err("error initializing panda DVI\n");
+
+	omap4_panda_hdmi_mux_init();
+	omap_display_init(&omap4_panda_dss_data);
+}
+
+
+#define PANDA_FB_RAM_SIZE                SZ_16M /* 1920×1080*4 * 2 */
+static struct omapfb_platform_data panda_fb_pdata = {
+	.mem_desc = {
+		.region_cnt = 1,
+		.region = {
+			[0] = {
+				.size = PANDA_FB_RAM_SIZE,
+			},
+		},
+	},
+};
+
+extern void __init omap4_panda_android_init(void);
+
+static void __init omap4_panda_init(void)
+{
+	int status;
+	int package = OMAP_PACKAGE_CBS;
+
+	omap_emif_setup_device_details(&emif_devices, &emif_devices);
+
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		package = OMAP_PACKAGE_CBL;
+	omap4_mux_init(board_mux, NULL, package);
+
+	omap_init_board_version(OMAP4_PANDA);
+	omap4_create_board_props();
+
+	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
+		pr_err("error setting wl12xx data\n");
+
+	omap4_panda_i2c_init();
+	omap4_register_ion();
+	omap4_audio_conf();
+	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
+	platform_device_register(&omap_vwlan_device);
+	board_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	omap4_ehci_init();
+	usb_musb_init(&musb_board_data);
+
+	omap_dmm_init();
+	omap_vram_set_sdram_vram(PANDA_FB_RAM_SIZE, 0);
+	omapfb_set_platform_data(&panda_fb_pdata);
+	omap4_panda_display_init();
+
+	if (cpu_is_omap446x()) {
+		/* Vsel0 = gpio, vsel1 = gnd */
+		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
+					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
+		if (status)
+			pr_err("TPS62361 initialization failed: %d\n", status);
+	}
+	omap_enable_smartreflex_on_init();
+	/*
+	 * 7X-38.400MBB-T oscillator uses:
+	 * Up time = startup time(max 10ms) + enable time (max 100ns: round 1us)
+	 * Down time = disable time (max 100ns: round 1us)
+	 */
+	omap_pm_set_osc_lp_time(11000, 1);
+}
+
+static void __init omap4_panda_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
+
+static void __init omap4_panda_reserve(void)
+{
+	omap_init_ram_size();
+
+#ifdef CONFIG_ION_OMAP
+	omap_ion_init();
+#endif
+
+	omap_ram_console_init(OMAP_RAM_CONSOLE_START_DEFAULT,
+			OMAP_RAM_CONSOLE_SIZE_DEFAULT);
+
+	/* do the static reservations first */
+	memblock_remove(PHYS_ADDR_SMC_MEM, PHYS_ADDR_SMC_SIZE);
+	memblock_remove(PHYS_ADDR_DUCATI_MEM, PHYS_ADDR_DUCATI_SIZE);
+	/* ipu needs to recognize secure input buffer area as well */
+	omap_ipu_set_static_mempool(PHYS_ADDR_DUCATI_MEM, PHYS_ADDR_DUCATI_SIZE +
+					OMAP4_ION_HEAP_SECURE_INPUT_SIZE +
+					OMAP4_ION_HEAP_SECURE_OUTPUT_WFDHDCP_SIZE);
+
+	omap_reserve();
+}
+
+MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
+	/* Maintainer: David Anders - Texas Instruments Inc */
+	.boot_params	= 0x80000100,
+	.reserve	= omap4_panda_reserve,
+	.map_io		= omap4_panda_map_io,
+	.init_early	= omap4_panda_init_early,
+	.init_irq	= gic_init_irq,
+	.init_machine	= omap4_panda_init,
+	.timer		= &omap_timer,
+MACHINE_END