diff options
author | Imre Deak <imre.deak@solidboot.com> | 2007-03-06 03:16:36 -0800 |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2007-05-09 10:39:14 +0100 |
commit | b7cc6d46b4f8157bfc58a6ed143ffa83575e236a (patch) | |
tree | 107a080740734d99d32ee92372fd7a9c6de538f6 /arch/arm/plat-omap/fb.c | |
parent | b01d96d653b1387ee0a91094ee54a8c523c3be09 (diff) | |
download | kernel_samsung_tuna-b7cc6d46b4f8157bfc58a6ed143ffa83575e236a.zip kernel_samsung_tuna-b7cc6d46b4f8157bfc58a6ed143ffa83575e236a.tar.gz kernel_samsung_tuna-b7cc6d46b4f8157bfc58a6ed143ffa83575e236a.tar.bz2 |
ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)
- in addition to fixed FB regions - as passed by the bootloader -
allow dynamic allocations
- do some more checking against overlapping / reserved regions
- move the FB specific parts out from sram.c to fb.c
Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/plat-omap/fb.c')
-rw-r--r-- | arch/arm/plat-omap/fb.c | 277 |
1 files changed, 247 insertions, 30 deletions
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index a302d91..469f580 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -39,6 +39,8 @@ #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) static struct omapfb_platform_data omapfb_config; +static int config_invalid; +static int configured_regions; static u64 omap_fb_dma_mask = ~(u32)0; @@ -53,46 +55,246 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; -/* called from map_io */ -void omapfb_reserve_mem(void) +static inline int ranges_overlap(unsigned long start1, unsigned long size1, + unsigned long start2, unsigned long size2) { - const struct omap_fbmem_config *fbmem_conf; - unsigned long total_size; + return (start1 >= start2 && start1 < start2 + size2) || + (start2 >= start1 && start2 < start1 + size1); +} + +static inline int range_included(unsigned long start1, unsigned long size1, + unsigned long start2, unsigned long size2) +{ + return start1 >= start2 && start1 + size1 <= start2 + size2; +} + + +/* Check if there is an overlapping region. */ +static int fbmem_region_reserved(unsigned long start, size_t size) +{ + struct omapfb_mem_region *rg; int i; - if (!omap_fb_sram_valid) { - /* FBMEM SRAM configuration was already found to be invalid. - * Ignore the whole configuration block. */ - omapfb_config.mem_desc.region_cnt = 0; - return; + rg = &omapfb_config.mem_desc.region[0]; + for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) { + if (!rg->paddr) + /* Empty slot. */ + continue; + if (ranges_overlap(start, size, rg->paddr, rg->size)) + return 1; } + return 0; +} - i = 0; - total_size = 0; - while ((fbmem_conf = omap_get_nr_config(OMAP_TAG_FBMEM, - struct omap_fbmem_config, i)) != NULL) { - unsigned long start; - unsigned long size; +/* + * Get the region_idx`th region from board config/ATAG and convert it to + * our internal format. + */ +static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg) +{ + const struct omap_fbmem_config *conf; + u32 paddr; - if (i == OMAPFB_PLANE_NUM) { - printk(KERN_ERR "ignoring extra plane info\n"); + conf = omap_get_nr_config(OMAP_TAG_FBMEM, + struct omap_fbmem_config, region_idx); + if (conf == NULL) + return -ENOENT; + + paddr = conf->start; + /* + * Low bits encode the page allocation mode, if high bits + * are zero. Otherwise we need a page aligned fixed + * address. + */ + memset(rg, 0, sizeof(*rg)); + rg->type = paddr & ~PAGE_MASK; + rg->paddr = paddr & PAGE_MASK; + rg->size = PAGE_ALIGN(conf->size); + return 0; +} + +static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type, + unsigned long mem_start, + unsigned long mem_size) +{ + /* + * Check if the configuration specifies the type explicitly. + * type = 0 && paddr = 0, a default don't care case maps to + * the SDRAM type. + */ + if (rg->type || (!rg->type && !rg->paddr)) + return 0; + if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) { + rg->type = mem_type; + return 0; + } + /* Can't determine it. */ + return -1; +} + +static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, + unsigned long start_avail, unsigned size_avail) +{ + unsigned long paddr = rg->paddr; + size_t size = rg->size; + + if (rg->type > OMAPFB_MEMTYPE_MAX) { + printk(KERN_ERR + "Invalid start address for FB region %d\n", region_idx); + return -EINVAL; + } + + if (!rg->size) { + printk(KERN_ERR "Zero size for FB region %d\n", region_idx); + return -EINVAL; + } + + if (!paddr) + /* Allocate this dynamically, leave paddr 0 for now. */ + return 0; + + /* + * Fixed region for the given RAM range. Check if it's already + * reserved by the FB code or someone else. + */ + if (fbmem_region_reserved(paddr, size) || + !range_included(paddr, size, start_avail, size_avail)) { + printk(KERN_ERR "Trying to use reserved memory " + "for FB region %d\n", region_idx); + return -EINVAL; + } + + return 0; +} + +/* + * Called from map_io. We need to call to this early enough so that we + * can reserve the fixed SDRAM regions before VM could get hold of them. + */ +void omapfb_reserve_sdram(void) +{ + struct bootmem_data *bdata; + unsigned long sdram_start, sdram_size; + unsigned long reserved; + int i; + + if (config_invalid) + return; + + bdata = NODE_DATA(0)->bdata; + sdram_start = bdata->node_boot_start; + sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; + reserved = 0; + for (i = 0; ; i++) { + struct omapfb_mem_region rg; + + if (get_fbmem_region(i, &rg) < 0) break; + if (i == OMAPFB_PLANE_NUM) { + printk(KERN_ERR + "Extraneous FB mem configuration entries\n"); + config_invalid = 1; + return; } - start = fbmem_conf->start; - size = fbmem_conf->size; - omapfb_config.mem_desc.region[i].paddr = start; - omapfb_config.mem_desc.region[i].size = size; - if (omap_fb_sram_plane != i && start) { - reserve_bootmem(start, size); - total_size += size; + /* Check if it's our memory type. */ + if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM, + sdram_start, sdram_size) < 0 || + (rg.type != OMAPFB_MEMTYPE_SDRAM)) + continue; + BUG_ON(omapfb_config.mem_desc.region[i].size); + if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) { + config_invalid = 1; + return; } - i++; + if (rg.paddr) + reserve_bootmem(rg.paddr, rg.size); + reserved += rg.size; + omapfb_config.mem_desc.region[i] = rg; + configured_regions++; } omapfb_config.mem_desc.region_cnt = i; - if (total_size) + if (reserved) pr_info("Reserving %lu bytes SDRAM for frame buffer\n", - total_size); + reserved); +} + +/* + * Called at sram init time, before anything is pushed to the SRAM stack. + * Because of the stack scheme, we will allocate everything from the + * start of the lowest address region to the end of SRAM. This will also + * include padding for page alignment and possible holes between regions. + * + * As opposed to the SDRAM case, we'll also do any dynamic allocations at + * this point, since the driver built as a module would have problem with + * freeing / reallocating the regions. + */ +unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail) +{ + struct omapfb_mem_region rg; + unsigned long pend_avail; + unsigned long reserved; + int i; + + if (config_invalid) + return 0; + + reserved = 0; + pend_avail = pstart_avail + size_avail; + for (i = 0; ; i++) { + if (get_fbmem_region(i, &rg) < 0) + break; + if (i == OMAPFB_PLANE_NUM) { + printk(KERN_ERR + "Extraneous FB mem configuration entries\n"); + config_invalid = 1; + return 0; + } + /* Check if it's our memory type. */ + if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM, + sram_pstart, sram_size) < 0 || + (rg.type != OMAPFB_MEMTYPE_SRAM)) + continue; + BUG_ON(omapfb_config.mem_desc.region[i].size); + + if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) { + config_invalid = 1; + return 0; + } + + if (!rg.paddr) { + /* Dynamic allocation */ + if ((size_avail & PAGE_MASK) < rg.size) { + printk("Not enough SRAM for FB region %d\n", + i); + config_invalid = 1; + return 0; + } + size_avail = (size_avail - rg.size) & PAGE_MASK; + rg.paddr = pstart_avail + size_avail; + } + /* Reserve everything above the start of the region. */ + if (pend_avail - rg.paddr > reserved) + reserved = pend_avail - rg.paddr; + size_avail = pend_avail - reserved - pstart_avail; + + /* + * We have a kernel mapping for this already, so the + * driver won't have to make one. + */ + rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart); + omapfb_config.mem_desc.region[i] = rg; + configured_regions++; + } + omapfb_config.mem_desc.region_cnt = i; + if (reserved) + pr_info("Reserving %lu bytes SRAM for frame buffer\n", + reserved); + return reserved; } void omapfb_set_ctrl_platform_data(void *data) @@ -104,10 +306,19 @@ static inline int omap_init_fb(void) { const struct omap_lcd_config *conf; + if (config_invalid) + return 0; + if (configured_regions != omapfb_config.mem_desc.region_cnt) { + printk(KERN_ERR "Invalid FB mem configuration entries\n"); + return 0; + } conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); - if (conf == NULL) + if (conf == NULL) { + if (configured_regions) + /* FB mem config, but no LCD config? */ + printk(KERN_ERR "Missing LCD configuration\n"); return 0; - + } omapfb_config.lcd = *conf; return platform_device_register(&omap_fb_device); @@ -117,7 +328,13 @@ arch_initcall(omap_init_fb); #else -void omapfb_reserve_mem(void) {} +void omapfb_reserve_sdram(void) {} +unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long start_avail, + unsigned long size_avail) {} + #endif |