Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4278/1: configure pxa27x I2C SCL as "input"
  [ARM] 4272/1: Missing symbol h1940_pm_return fix
  [ARM] 4235/1: ns9xxx: declare the clock functions as "const"
  [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms)
  [ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs

5 files changed, 60 insertions, 9 deletions

diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index c072d94..9dd49cf 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -4,6 +4,9 @@ menu "IOP32x Implementation Options"
 
 comment "IOP32x Platform Types"
 
+config MACH_EP80219
+	bool
+
 config MACH_GLANTANK
 	bool "Enable support for the IO-Data GLAN Tank"
 	help
@@ -19,6 +22,7 @@ config ARCH_IQ80321
 
 config ARCH_IQ31244
 	bool "Enable support for EP80219/IQ31244"
+	select MACH_EP80219
 	help
 	  Say Y here if you want to run your kernel on the Intel EP80219
 	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 571ac35..60e7430 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -39,22 +39,35 @@
 #include <asm/arch/time.h>
 
 /*
- * The EP80219 and IQ31244 use the same machine ID.  To find out
- * which of the two we're running on, we look at the processor ID.
+ * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
+ * same machine id, and the processor type was used to select board type.
+ * However this assumption breaks for an iq80219 board which is an iop219
+ * processor on an iq31244 board.  The force_ep80219 flag has been added
+ * for old boot loaders using the iq31244 machine id for an ep80219 platform.
  */
+static int force_ep80219;
+
 static int is_80219(void)
 {
 	extern int processor_id;
 	return !!((processor_id & 0xffffffe0) == 0x69052e20);
 }
 
+static int is_ep80219(void)
+{
+	if (machine_is_ep80219() || force_ep80219)
+		return 1;
+	else
+		return 0;
+}
+
 
 /*
  * EP80219/IQ31244 timer tick configuration.
  */
 static void __init iq31244_timer_init(void)
 {
-	if (is_80219()) {
+	if (is_ep80219()) {
 		/* 33.333 MHz crystal.  */
 		iop_init_time(200000000);
 	} else {
@@ -165,12 +178,18 @@ static struct hw_pci iq31244_pci __initdata = {
 
 static int __init iq31244_pci_init(void)
 {
-	if (machine_is_iq31244()) {
+	if (is_ep80219())
+		pci_common_init(&ep80219_pci);
+	else if (machine_is_iq31244()) {
 		if (is_80219()) {
-			pci_common_init(&ep80219_pci);
-		} else {
-			pci_common_init(&iq31244_pci);
+			printk("note: iq31244 board type has been selected\n");
+			printk("note: to select ep80219 operation:\n");
+			printk("\t1/ specify \"force_ep80219\" on the kernel"
+				" command line\n");
+			printk("\t2/ update boot loader to pass"
+				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
 		}
+		pci_common_init(&iq31244_pci);
 	}
 
 	return 0;
@@ -277,10 +296,18 @@ static void __init iq31244_init_machine(void)
 	platform_device_register(&iq31244_flash_device);
 	platform_device_register(&iq31244_serial_device);
 
-	if (is_80219())
+	if (is_ep80219())
 		pm_power_off = ep80219_power_off;
 }
 
+static int __init force_ep80219_setup(char *str)
+{
+	force_ep80219 = 1;
+	return 1;
+}
+
+__setup("force_ep80219", force_ep80219_setup);
+
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
 	.phys_io	= IQ31244_UART,
@@ -291,3 +318,19 @@ MACHINE_START(IQ31244, "Intel IQ31244")
 	.timer		= &iq31244_timer,
 	.init_machine	= iq31244_init_machine,
 MACHINE_END
+
+/* There should have been an ep80219 machine identifier from the beginning.
+ * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
+ * "force_ep80219" on the kernel command line, otherwise iq31244 operation
+ * will be selected.
+ */
+MACHINE_START(EP80219, "Intel EP80219")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ31244_UART,
+	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop32x_init_irq,
+	.timer		= &iq31244_timer,
+	.init_machine	= iq31244_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 01c60d0..d052ab2 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -202,7 +202,9 @@ static void __init h1940_map_io(void)
 
 	/* setup PM */
 
+#ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
 	s3c2410_pm_init();
 }
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 480ccde..ae1d0a8 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -224,7 +224,9 @@ static void __init rx3715_init_irq(void)
 
 static void __init rx3715_init_machine(void)
 {
+#ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
+#endif
 	s3c2410_pm_init();
 
 	s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 7a45b6d..7565735 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -137,7 +137,7 @@ static struct irq_chip s3c2443_irq_lcd = {
 
 static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6);
+	s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
 }
 
 #define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))