[POWERPC] Update mpc7448hpc2 board irq support using device tree

The patch rewrites mpc7448hpc2 board irq support according to the new
mpic device tree interface.

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 18 insertions, 13 deletions

diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc8..f303846 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
 			goto err;
 
 		r[1].name = "tx";
-		r[1].start = np->intrs[0].line;
-		r[1].end = np->intrs[0].line;
+		r[1].start = irq_of_parse_and_map(np, 0);
+		r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
+		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
+			__FUNCTION__,r[1].name, r[1].start, r[1].end);
 
 		tsi_eth_dev =
 		    platform_device_register_simple("tsi-ethernet", i, &r[0],
-						    np->n_intrs + 1);
+						    1);
 
 		if (IS_ERR(tsi_eth_dev)) {
 			ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
 		tsi_eth_data.regs = r[0].start;
 		tsi_eth_data.phyregs = res.start;
 		tsi_eth_data.phy = *phy_id;
-		tsi_eth_data.irq_num = np->intrs[0].line;
+		tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
 		of_node_put(phy);
 		ret =
 		    platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 3265d54..2ab06ed 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
-
 #include <asm/byteorder.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
 
 	(hose)->ops = &tsi108_direct_pci_ops;
 
-	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. "
+	printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
 	       "Firmware bus number: %d->%d\n",
 	       rsrc.start, hose->first_busno, hose->last_busno);
 
@@ -278,7 +277,7 @@ static void init_pci_source(void)
 	mb();
 }
 
-static inline int get_pci_source(void)
+static inline unsigned int get_pci_source(void)
 {
 	u_int temp = 0;
 	int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
  * Interrupt controller descriptor for cascaded PCI interrupt controller.
  */
 
-struct hw_interrupt_type tsi108_pci_irq = {
+static struct irq_chip tsi108_pci_irq = {
 	.typename = "tsi108_PCI_int",
-	.enable = tsi108_pci_irq_enable,
-	.disable = tsi108_pci_irq_disable,
+	.mask = tsi108_pci_irq_disable,
 	.ack = tsi108_pci_irq_ack,
 	.end = tsi108_pci_irq_end,
+	.unmask = tsi108_pci_irq_enable,
 };
 
 /*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
 	for (i = 0; i < NUM_PCI_IRQS; i++) {
-		irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq;
+		irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
 		irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
 	}
 
 	init_pci_source();
 }
 
-int tsi108_irq_cascade(struct pt_regs *regs, void *unused)
+void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
+			    struct pt_regs *regs)
 {
-	return get_pci_source();
+	unsigned int cascade_irq = get_pci_source();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq, regs);
+	desc->chip->eoi(irq);
 }