powerpc: rename immap_86xx.h to fsl_guts.h, and add 85xx support

The immap_86xx.h header file only defines one data structure: the "global
utilities" register set found on Freescale PowerPC SOCs.  Rename this file
to fsl_guts.h to reflect its true purpose, and extend it to cover the "GUTS"
register set on 85xx chips.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

1 files changed, 76 insertions, 35 deletions

diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/fsl_guts.h
index 0f165e5..bebd124 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -1,5 +1,5 @@
 /**
- * MPC86xx Internal Memory Map
+ * Freecale 85xx and 86xx Global Utilties register set
  *
  * Authors: Jeff Brown
  *          Timur Tabi <timur@freescale.com>
@@ -10,73 +10,112 @@
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
- *
- * This header file defines structures for various 86xx SOC devices that are
- * used by multiple source files.
  */
 
-#ifndef __ASM_POWERPC_IMMAP_86XX_H__
-#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifndef __ASM_POWERPC_FSL_GUTS_H__
+#define __ASM_POWERPC_FSL_GUTS_H__
 #ifdef __KERNEL__
 
-/* Global Utility Registers */
-struct ccsr_guts {
+/*
+ * These #ifdefs are safe because it's not possible to build a kernel that
+ * runs on e500 and e600 cores.
+ */
+
+#if !defined(CONFIG_PPC_85xx) && !defined(CONFIG_PPC_86xx)
+#error Only 85xx and 86xx SOCs are supported
+#endif
+
+/**
+ * Global Utility Registers.
+ *
+ * Not all registers defined in this structure are available on all chips, so
+ * you are expected to know whether a given register actually exists on your
+ * chip before you access it.
+ *
+ * Also, some registers are similar on different chips but have slightly
+ * different names.  In these cases, one name is chosen to avoid extraneous
+ * #ifdefs.
+ */
+#ifdef CONFIG_PPC_85xx
+struct ccsr_guts_85xx {
+#else
+struct ccsr_guts_86xx {
+#endif
 	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
 	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
 	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
 	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
 	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
-	u8	res1[0x20 - 0x14];
+	__be32	pordevsr2;	/* 0x.0014 - POR device status register 2 */
+	u8	res018[0x20 - 0x18];
 	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
-	u8	res2[0x30 - 0x24];
+	u8	res024[0x30 - 0x24];
 	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
-	u8	res3[0x40 - 0x34];
+	u8	res034[0x40 - 0x34];
 	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
-	u8	res4[0x50 - 0x44];
+	u8	res044[0x50 - 0x44];
 	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
-	u8	res5[0x60 - 0x54];
+	u8	res054[0x60 - 0x54];
 	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
-	u8	res6[0x70 - 0x64];
+        __be32  pmuxcr2;	/* 0x.0064 - Alternate function signal multiplex control 2 */
+        __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
+        u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
-	u8	res7[0x80 - 0x78];
+	u8	res078[0x7c - 0x78];
+	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
 	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
-	u8	res8[0x90 - 0x84];
+	__be32  pmrccr;		/* 0x.0084 - Power Management Reset Counter Configuration Register */
+	__be32  pmpdccr;	/* 0x.0088 - Power Management Power Down Counter Configuration Register */
+	__be32  pmcdr;		/* 0x.008c - 4Power management clock disable register */
 	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
 	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
-	u8	res9[0xA0 - 0x98];
+	__be32  ectrstcr;	/* 0x.0098 - Exception reset control register */
+	__be32  autorstsr;	/* 0x.009c - Automatic reset status register */
 	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
 	__be32	svr;		/* 0x.00a4 - System Version Register */
-	u8	res10[0xB0 - 0xA8];
+	u8	res0a8[0xb0 - 0xa8];
 	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
-	u8	res11[0xC0 - 0xB4];
+	u8	res0b4[0xc0 - 0xb4];
+#ifdef CONFIG_PPC_85xx
+	__be32  iovselsr;	/* 0x.00c0 - I/O voltage select status register */
+#else
 	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
-	u8	res12[0x800 - 0xC4];
+#endif
+	u8	res0c4[0x224 - 0xc4];
+	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
+	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
+	u8	res22c[0x800 - 0x22c];
 	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
-	u8	res13[0x900 - 0x804];
+	u8	res804[0x900 - 0x804];
 	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
-	u8	res14[0x908 - 0x904];
+	u8	res904[0x908 - 0x904];
 	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
-	u8	res15[0x914 - 0x90C];
+	u8	res90c[0x914 - 0x90c];
 	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
-	u8	res16[0xB20 - 0x918];
+	u8	res918[0xb20 - 0x918];
 	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
 	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
 	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
-	u8	res17[0xE00 - 0xB2C];
+	u8	resb2c[0xe00 - 0xb2c];
 	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
-	u8	res18[0xE10 - 0xE04];
+	u8	rese04[0xe10 - 0xe04];
 	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
-	u8	res19[0xE20 - 0xE14];
+	u8	rese14[0xe20 - 0xe14];
 	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
-	u8	res20[0xF04 - 0xE24];
+	__be32  cpfor;		/* 0x.0e24 - L2 charge pump fuse override register */
+	u8	rese28[0xf04 - 0xe28];
 	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
 	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
-	u8	res21[0xF40 - 0xF0C];
-	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
-	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
+	u8	resf0c[0xf2c - 0xf0c];
+	__be32  itcr;		/* 0x.0f2c - Internal transaction control register */
+	u8	resf30[0xf40 - 0xf30];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes2 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes2 Control Register 0 */
 } __attribute__ ((packed));
 
+#ifdef CONFIG_PPC_86xx
+
 #define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
 #define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
 
@@ -93,7 +132,7 @@ struct ccsr_guts {
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
  */
-static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+static inline void guts_set_dmacr(struct ccsr_guts_86xx __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int device)
 {
 	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
@@ -129,7 +168,7 @@ static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
  * ch: The channel on the DMA controller (0, 1, 2, or 3)
  * value: the new value for the bit (0 or 1)
  */
-static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts_86xx __iomem *guts,
 	unsigned int co, unsigned int ch, unsigned int value)
 {
 	if ((ch == 0) || (ch == 3)) {
@@ -152,5 +191,7 @@ static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
 #define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
 #define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
 
-#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
-#endif /* __KERNEL__ */
+#endif
+
+#endif
+#endif