sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501

This patch replaces all instances of CONFIG_VOYAGERGX with
CONFIG_MFD_SM501. While at it we make sure the r2d code compiles
both with and without SM501.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

4 files changed, 25 insertions, 31 deletions

diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 37cf636..6c73a5b 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -136,7 +136,7 @@ endif
 
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
-core-$(CONFIG_VOYAGERGX)	+= arch/sh/cchips/voyagergx/
+core-$(CONFIG_MFD_SM501)	+= arch/sh/cchips/voyagergx/
 
 cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
 cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c
index e899329..8788521 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/renesas/rts7751r2d/irq.c
@@ -153,5 +153,7 @@ void __init init_rts7751r2d_IRQ(void)
 	}
 
 	register_intc_controller(d);
+#ifdef CONFIG_MFD_SM501
 	setup_voyagergx_irq();
+#endif
 }
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 90703d5..bea9848 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -73,6 +73,22 @@ static struct platform_device cf_ide_device  = {
 	},
 };
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OUTPORT,
+		.end	= PA_OUTPORT + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+#ifdef CONFIG_MFD_SM501
 static struct plat_serial8250_port uart_platform_data[] = {
 	{
 		.membase	= (void __iomem *)VOYAGER_UART_BASE,
@@ -94,21 +110,6 @@ static struct platform_device uart_device = {
 	},
 };
 
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_OUTPORT,
-		.end	= PA_OUTPORT + 8 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
 static struct resource sm501_resources[] = {
 	[0]	= {
 		.start	= 0x10000000,
@@ -133,10 +134,14 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+#endif /* CONFIG_MFD_SM501 */
+
 static struct platform_device *rts7751r2d_devices[] __initdata = {
+#ifdef CONFIG_MFD_SM501
 	&uart_device,
-	&heartbeat_device,
 	&sm501_device,
+#endif
+	&heartbeat_device,
 };
 
 static int __init rts7751r2d_devices_setup(void)
@@ -187,7 +192,7 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_init_irq		= init_rts7751r2d_IRQ,
 	.mv_irq_demux		= rts7751r2d_irq_demux,
 
-#ifdef CONFIG_USB_SM501
+#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD)
 	.mv_consistent_alloc	= voyagergx_consistent_alloc,
 	.mv_consistent_free	= voyagergx_consistent_free,
 #endif
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
index 2e516e9..7892361 100644
--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -1,18 +1,5 @@
 menu "Companion Chips"
 
-config VOYAGERGX
-	bool "VoyagerGX chip support"
-	depends on SH_RTS7751R2D
-	help
-	  Selecting this option will support Silicon Motion, Inc. SM501.
-	  Designed to complement needs for the embedded industry, it
-	  provides video and 2D capability. To reduce system cost a
-	  wide variety of include I/O is supported, including analog RGB
-	  and digital LCD Panel interface, 8-bit parallel interface, USB,
-	  UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There
-	  are additional GPIO bits that can be used to interface to
-	  external as well.
-
 config HD6446X_SERIES
 	bool