Merge branch 'linux-2.6' into for-2.6.24

174 files changed, 4013 insertions, 6752 deletions

diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8fc0edb..2feeef8 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -23,24 +23,24 @@
 #include "generic.h"
 
 #ifdef CONFIG_PCI
-static int __init micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return KS8695_IRQ_EXTERN0;
 }
 
-static struct ks8695_pci_cfg micrel_pci = {
+static struct ks8695_pci_cfg __initdata micrel_pci = {
 	.mode		= KS8695_MODE_MINIPCI,
 	.map_irq	= micrel_pci_map_irq,
 };
 #endif
 
 
-static void micrel_init(void)
+static void __init micrel_init(void)
 {
 	printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
 
 #ifdef CONFIG_PCI
-	ks8695_init_pci(&micrel_pci);
+//	ks8695_init_pci(&micrel_pci);
 #endif
 
 	/* Add devices */
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 88d5fd3..26d131a 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -6,7 +6,7 @@
 
 config CPU_S3C2442
 	bool
-	depends on ARCH_S3C2420
+	depends on ARCH_S3C2410
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select S3C2410_PM if PM
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 2edcecd..ef80156 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -9,6 +9,7 @@
  */
 #include <linux/clk.h>
 #include <linux/etherdevice.h>
+#include <linux/i2c-gpio.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/platform_device.h>
@@ -123,6 +124,19 @@ static struct platform_device ngw_gpio_leds = {
 	}
 };
 
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin	= GPIO_PIN_PA(6),
+	.scl_pin	= GPIO_PIN_PA(7),
+};
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+
 static int __init atngw100_init(void)
 {
 	unsigned	i;
@@ -147,6 +161,10 @@ static int __init atngw100_init(void)
 	}
 	platform_device_register(&ngw_gpio_leds);
 
+	at32_select_gpio(i2c_gpio_data.sda_pin, 0);
+	at32_select_gpio(i2c_gpio_data.scl_pin, 0);
+	platform_device_register(&i2c_gpio_device);
+
 	return 0;
 }
 postcore_initcall(atngw100_init);
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index 71bc7d3..718578f 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -50,4 +50,30 @@ config BOARD_ATSTK1002_SPI1
 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
 	  here to configure that SPI controller.
 
+config BOARD_ATSTK1002_J2_LED
+	bool
+	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
+
+choice
+	prompt "LEDs connected to J2:"
+	depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
+	optional
+	help
+	  Select this if you have jumpered the J2 jumper block to the
+	  LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
+	  IDC cable.  A default "heartbeat" trigger is provided, but
+	  you can of course override this.
+
+config BOARD_ATSTK1002_J2_LED8
+	bool "LED0..LED7"
+	help
+	  Select this if J2 is jumpered to LED0..LED7 amber leds.
+
+config BOARD_ATSTK1002_J2_RGB
+	bool "RGB leds"
+	help
+	  Select this if J2 is jumpered to the RGB leds.
+
+endchoice
+
 endif	# stk 1002
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index cb93eab..c9981b7 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -11,6 +11,7 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -120,6 +121,65 @@ static void __init set_hw_addr(struct platform_device *pdev)
 	clk_put(pclk);
 }
 
+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
+
+static struct gpio_led stk_j2_led[] = {
+#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
+#define LEDSTRING "J2 jumpered to LED8"
+	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+			.default_trigger = "heartbeat", },
+#else	/* RGB */
+#define LEDSTRING "J2 jumpered to RGB LEDs"
+	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+
+	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+			.default_trigger = "heartbeat", },
+	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+			.default_trigger = "heartbeat", },
+	/* PB16, PB30 unused */
+#endif
+};
+
+static struct gpio_led_platform_data stk_j2_led_data = {
+	.num_leds	= ARRAY_SIZE(stk_j2_led),
+	.leds		= stk_j2_led,
+};
+
+static struct platform_device stk_j2_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 2,	/* gpio block J2 */
+	.dev		= {
+		.platform_data	= &stk_j2_led_data,
+	},
+};
+
+static void setup_j2_leds(void)
+{
+	unsigned	i;
+
+	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
+		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+
+	printk("STK1002: " LEDSTRING "\n");
+	platform_device_register(&stk_j2_led_dev);
+}
+
+#else
+static void setup_j2_leds(void)
+{
+}
+#endif
+
 void __init setup_board(void)
 {
 #ifdef	CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
@@ -185,6 +245,8 @@ static int __init atstk1002_init(void)
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
 #endif
 
+	setup_j2_leds();
+
 	return 0;
 }
 postcore_initcall(atstk1002_init);
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index e7e724bc..03e2e68 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -548,6 +548,7 @@ config ETRAX_IDE
 	select BLK_DEV_IDEDISK
 	select BLK_DEV_IDECD
 	select BLK_DEV_IDEDMA
+	select IDE_GENERIC
 	help
 	  Enable this to get support for ATA/IDE.
 	  You can't use parallel ports or SCSI ports
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 1d859c1..cc6ba54 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -592,6 +592,7 @@ config ETRAX_IDE
 	select BLK_DEV_IDEDISK
 	select BLK_DEV_IDECD
 	select BLK_DEV_IDEDMA
+	select IDE_GENERIC
 	help
 	  Enables the ETRAX IDE driver.
 
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index e061b63a..dfbe7ab 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -37,6 +37,7 @@
 #include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c
index de7688c..ddc6272 100644
--- a/arch/h8300/kernel/sys_h8300.c
+++ b/arch/h8300/kernel/sys_h8300.c
@@ -18,6 +18,7 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
+#include <linux/fs.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index f952493..97b64d7 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -614,10 +614,14 @@ config X86_PAE
 
 # Common NUMA Features
 config NUMA
-	bool "Numa Memory Allocation and Scheduler Support"
-	depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI)
+	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
+	depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL
 	default n if X86_PC
 	default y if (X86_NUMAQ || X86_SUMMIT)
+	help
+	  NUMA support for i386. This is currently high experimental
+	  and should be only used for kernel development. It might also
+	  cause boot failures.
 
 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 	depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
@@ -1228,6 +1232,11 @@ menuconfig INSTRUMENTATION
 	bool "Instrumentation Support"
 	depends on EXPERIMENTAL
 	default y
+	---help---
+	  Say Y here to get to see options related to performance measurement,
+	  debugging, and testing. This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
 
 if INSTRUMENTATION
 
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 01f0ff0..52b9324 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -51,8 +51,8 @@ cflags-y += -maccumulate-outgoing-args
 CFLAGS				+= $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;)
 
 # do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
 
 # is .cfi_signal_frame supported too?
 cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
diff --git a/arch/i386/boot/boot.h b/arch/i386/boot/boot.h
index dec70c9..20bab94 100644
--- a/arch/i386/boot/boot.h
+++ b/arch/i386/boot/boot.h
@@ -87,7 +87,7 @@ static inline void set_fs(u16 seg)
 static inline u16 fs(void)
 {
 	u16 seg;
-	asm("movw %%fs,%0" : "=rm" (seg));
+	asm volatile("movw %%fs,%0" : "=rm" (seg));
 	return seg;
 }
 
@@ -98,7 +98,7 @@ static inline void set_gs(u16 seg)
 static inline u16 gs(void)
 {
 	u16 seg;
-	asm("movw %%gs,%0" : "=rm" (seg));
+	asm volatile("movw %%gs,%0" : "=rm" (seg));
 	return seg;
 }
 
@@ -107,19 +107,19 @@ typedef unsigned int addr_t;
 static inline u8 rdfs8(addr_t addr)
 {
 	u8 v;
-	asm("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	asm volatile("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
 	return v;
 }
 static inline u16 rdfs16(addr_t addr)
 {
 	u16 v;
-	asm("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+	asm volatile("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
 	return v;
 }
 static inline u32 rdfs32(addr_t addr)
 {
 	u32 v;
-	asm("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+	asm volatile("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
 	return v;
 }
 
@@ -139,19 +139,19 @@ static inline void wrfs32(u32 v, addr_t addr)
 static inline u8 rdgs8(addr_t addr)
 {
 	u8 v;
-	asm("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	asm volatile("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
 	return v;
 }
 static inline u16 rdgs16(addr_t addr)
 {
 	u16 v;
-	asm("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+	asm volatile("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
 	return v;
 }
 static inline u32 rdgs32(addr_t addr)
 {
 	u32 v;
-	asm("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+	asm volatile("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
 	return v;
 }
 
@@ -180,15 +180,15 @@ static inline int memcmp(const void *s1, const void *s2, size_t len)
 static inline int memcmp_fs(const void *s1, addr_t s2, size_t len)
 {
 	u8 diff;
-	asm("fs; repe; cmpsb; setnz %0"
-	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	asm volatile("fs; repe; cmpsb; setnz %0"
+		     : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
 	return diff;
 }
 static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
 {
 	u8 diff;
-	asm("gs; repe; cmpsb; setnz %0"
-	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	asm volatile("gs; repe; cmpsb; setnz %0"
+		     : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
 	return diff;
 }
 
diff --git a/arch/i386/boot/cpucheck.c b/arch/i386/boot/cpucheck.c
index 991e8ce..e655a89 100644
--- a/arch/i386/boot/cpucheck.c
+++ b/arch/i386/boot/cpucheck.c
@@ -96,7 +96,8 @@ static int has_fpu(void)
 		asm volatile("movl %0,%%cr0" : : "r" (cr0));
 	}
 
-	asm("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw));
+	asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
+		     : "+m" (fsw), "+m" (fcw));
 
 	return fsw == 0 && (fcw & 0x103f) == 0x003f;
 }
diff --git a/arch/i386/boot/edd.c b/arch/i386/boot/edd.c
index 658834d..bd138e4 100644
--- a/arch/i386/boot/edd.c
+++ b/arch/i386/boot/edd.c
@@ -19,57 +19,28 @@
 
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 
-struct edd_dapa {
-	u8	pkt_size;
-	u8	rsvd;
-	u16	sector_cnt;
-	u16	buf_off, buf_seg;
-	u64	lba;
-	u64	buf_lin_addr;
-};
-
 /*
  * Read the MBR (first sector) from a specific device.
  */
 static int read_mbr(u8 devno, void *buf)
 {
-	struct edd_dapa dapa;
-	u16 ax, bx, cx, dx, si;
-
-	memset(&dapa, 0, sizeof dapa);
-	dapa.pkt_size = sizeof(dapa);
-	dapa.sector_cnt = 1;
-	dapa.buf_off = (size_t)buf;
-	dapa.buf_seg = ds();
-	/* dapa.lba = 0; */
-
-	ax = 0x4200;		/* Extended Read */
-	si = (size_t)&dapa;
-	dx = devno;
-	asm("pushfl; stc; int $0x13; setc %%al; popfl"
-	    : "+a" (ax), "+S" (si), "+d" (dx)
-	    : "m" (dapa)
-	    : "ebx", "ecx", "edi", "memory");
-
-	if (!(u8)ax)
-		return 0;	/* OK */
+	u16 ax, bx, cx, dx;
 
 	ax = 0x0201;		/* Legacy Read, one sector */
 	cx = 0x0001;		/* Sector 0-0-1 */
 	dx = devno;
 	bx = (size_t)buf;
-	asm("pushfl; stc; int $0x13; setc %%al; popfl"
-	    : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
-	    : : "esi", "edi", "memory");
+	asm volatile("pushfl; stc; int $0x13; setc %%al; popfl"
+		     : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
+		     : : "esi", "edi", "memory");
 
 	return -(u8)ax;		/* 0 or -1 */
 }
 
-static u32 read_mbr_sig(u8 devno, struct edd_info *ei)
+static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
 {
 	int sector_size;
 	char *mbrbuf_ptr, *mbrbuf_end;
-	u32 mbrsig;
 	u32 buf_base, mbr_base;
 	extern char _end[];
 
@@ -85,15 +56,15 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei)
 
 	/* Make sure we actually have space on the heap... */
 	if (!(boot_params.hdr.loadflags & CAN_USE_HEAP))
-		return 0;
+		return -1;
 	if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
-		return 0;
+		return -1;
 
 	if (read_mbr(devno, mbrbuf_ptr))
-		return 0;
+		return -1;
 
-	mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
-	return mbrsig;
+	*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
+	return 0;
 }
 
 static int get_edd_info(u8 devno, struct edd_info *ei)
@@ -160,6 +131,7 @@ void query_edd(void)
 	int do_edd = 1;
 	int devno;
 	struct edd_info ei, *edp;
+	u32 *mbrptr;
 
 	if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) {
 		if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip"))
@@ -168,7 +140,8 @@ void query_edd(void)
 			do_edd = 0;
 	}
 
-	edp = (struct edd_info *)boot_params.eddbuf;
+	edp    = boot_params.eddbuf;
+	mbrptr = boot_params.edd_mbr_sig_buffer;
 
 	if (!do_edd)
 		return;
@@ -186,11 +159,8 @@ void query_edd(void)
 			boot_params.eddbuf_entries++;
 		}
 
-		if (do_mbr) {
-			u32 mbr_sig;
-			mbr_sig = read_mbr_sig(devno, &ei);
-			boot_params.edd_mbr_sig_buffer[devno-0x80] = mbr_sig;
-		}
+		if (do_mbr && !read_mbr_sig(devno, &ei, mbrptr++))
+			boot_params.edd_mbr_sig_buf_entries = devno-0x80+1;
 	}
 }
 
diff --git a/arch/i386/boot/tty.c b/arch/i386/boot/tty.c
index 9c668aa..f3f14bd 100644
--- a/arch/i386/boot/tty.c
+++ b/arch/i386/boot/tty.c
@@ -54,9 +54,9 @@ static u8 gettime(void)
 	u16 ax = 0x0200;
 	u16 cx, dx;
 
-	asm("int $0x1a"
-	    : "+a" (ax), "=c" (cx), "=d" (dx)
-	    : : "ebx", "esi", "edi");
+	asm volatile("int $0x1a"
+		     : "+a" (ax), "=c" (cx), "=d" (dx)
+		     : : "ebx", "esi", "edi");
 
 	return dx >> 8;
 }
@@ -67,7 +67,7 @@ static u8 gettime(void)
 int getchar(void)
 {
 	u16 ax = 0;
-	asm("int $0x16" : "+a" (ax));
+	asm volatile("int $0x16" : "+a" (ax));
 
 	return ax & 0xff;
 }
@@ -75,9 +75,9 @@ int getchar(void)
 static int kbd_pending(void)
 {
 	u8 pending;
-	asm("int $0x16; setnz %0"
-	    : "=rm" (pending)
-	    : "a" (0x0100));
+	asm volatile("int $0x16; setnz %0"
+		     : "=rm" (pending)
+		     : "a" (0x0100));
 	return pending;
 }
 
diff --git a/arch/i386/boot/video-vga.c b/arch/i386/boot/video-vga.c
index 700d09a..aef02f9 100644
--- a/arch/i386/boot/video-vga.c
+++ b/arch/i386/boot/video-vga.c
@@ -47,16 +47,16 @@ static u8 vga_set_basic_mode(void)
 
 #ifdef CONFIG_VIDEO_400_HACK
 	if (adapter >= ADAPTER_VGA) {
-		asm(INT10
-		    : : "a" (0x1202), "b" (0x0030)
-		    : "ecx", "edx", "esi", "edi");
+		asm volatile(INT10
+			     : : "a" (0x1202), "b" (0x0030)
+			     : "ecx", "edx", "esi", "edi");
 	}
 #endif
 
 	ax = 0x0f00;
-	asm(INT10
-	    : "+a" (ax)
-	    : : "ebx", "ecx", "edx", "esi", "edi");
+	asm volatile(INT10
+		     : "+a" (ax)
+		     : : "ebx", "ecx", "edx", "esi", "edi");
 
 	mode = (u8)ax;
 
@@ -73,9 +73,10 @@ static u8 vga_set_basic_mode(void)
 		mode = 3;
 
 	/* Set the mode */
+	ax = mode;
 	asm volatile(INT10
-		     : : "a" (mode)
-		     : "ebx", "ecx", "edx", "esi", "edi");
+		     : "+a" (ax)
+		     : : "ebx", "ecx", "edx", "esi", "edi");
 	do_restore = 1;
 	return mode;
 }
diff --git a/arch/i386/boot/video.c b/arch/i386/boot/video.c
index 958130e..693f20d 100644
--- a/arch/i386/boot/video.c
+++ b/arch/i386/boot/video.c
@@ -61,7 +61,7 @@ static void store_video_mode(void)
 
 	/* Not all BIOSes are clean with respect to the top bit */
 	boot_params.screen_info.orig_video_mode = ax & 0x7f;
-	boot_params.screen_info.orig_video_page = page;
+	boot_params.screen_info.orig_video_page = page >> 8;
 }
 
 /*
diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c
index 1b66d5c..9f4ac8b 100644
--- a/arch/i386/kernel/alternative.c
+++ b/arch/i386/kernel/alternative.c
@@ -366,6 +366,8 @@ void apply_paravirt(struct paravirt_patch_site *start,
 		unsigned int used;
 
 		BUG_ON(p->len > MAX_PATCH_LEN);
+		/* prep the buffer with the original instructions */
+		memcpy(insnbuf, p->instr, p->len);
 		used = paravirt_ops.patch(p->instrtype, p->clobbers, insnbuf,
 					  (unsigned long)p->instr, p->len);
 
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index f9fff29..3d67ae1 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1085,7 +1085,7 @@ static int __init detect_init_APIC (void)
 	if (l & MSR_IA32_APICBASE_ENABLE)
 		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
 
-	if (nmi_watchdog != NMI_NONE)
+	if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED)
 		nmi_watchdog = NMI_LOCAL_APIC;
 
 	printk(KERN_INFO "Found and enabled local APIC!\n");
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index 4b8a8da4..e2f4a1c 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -754,14 +754,6 @@ static int pirq_entries [MAX_PIRQS];
 static int pirqs_enabled;
 int skip_ioapic_setup;
 
-static int __init ioapic_setup(char *str)
-{
-	skip_ioapic_setup = 1;
-	return 1;
-}
-
-__setup("noapic", ioapic_setup);
-
 static int __init ioapic_pirq_setup(char *str)
 {
 	int i, max;
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 99beac7..8c1c965 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -77,7 +77,7 @@ static int __init check_nmi_watchdog(void)
 	unsigned int *prev_nmi_count;
 	int cpu;
 
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
+	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED))
 		return 0;
 
 	if (!atomic_read(&nmi_active))
@@ -424,7 +424,7 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
 	if (!!old_state == !!nmi_watchdog_enabled)
 		return 0;
 
-	if (atomic_read(&nmi_active) < 0) {
+	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
 		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
 		return -EIO;
 	}
diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c
index debd7db..a39280b 100644
--- a/arch/i386/kernel/tsc.c
+++ b/arch/i386/kernel/tsc.c
@@ -292,7 +292,6 @@ static struct clocksource clocksource_tsc = {
 
 void mark_tsc_unstable(char *reason)
 {
-	sched_clock_unstable_event();
 	if (!tsc_unstable) {
 		tsc_unstable = 1;
 		tsc_enabled = 0;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index 01ffdd4..fcb38e7 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -249,9 +249,10 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
 	pmd_k = pmd_offset(pud_k, address);
 	if (!pmd_present(*pmd_k))
 		return NULL;
-	if (!pmd_present(*pmd))
+	if (!pmd_present(*pmd)) {
 		set_pmd(pmd, *pmd_k);
-	else
+		arch_flush_lazy_mmu_mode();
+	} else
 		BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
 	return pmd_k;
 }
diff --git a/arch/i386/xen/xen-head.S b/arch/i386/xen/xen-head.S
index bc71f3b..f8d6937 100644
--- a/arch/i386/xen/xen-head.S
+++ b/arch/i386/xen/xen-head.S
@@ -7,20 +7,20 @@
 #include <asm/boot.h>
 #include <xen/interface/elfnote.h>
 
-	.section .init.text
+.pushsection .init.text
 ENTRY(startup_xen)
 	movl %esi,xen_start_info
 	cld
 	movl $(init_thread_union+THREAD_SIZE),%esp
 	jmp xen_start_kernel
+.popsection
 
-.pushsection ".bss.page_aligned"
+.pushsection .bss.page_aligned
 	.align PAGE_SIZE_asm
 ENTRY(hypercall_page)
 	.skip 0x1000
 .popsection
 
-	.section .text
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
 	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 21aa4fc..8c39913 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -327,17 +327,7 @@ config FORCE_CPEI_RETARGET
 	This option it useful to enable this feature on older BIOS's as well.
 	You can also enable this by using boot command line option force_cpei=1.
 
-config PREEMPT
-	bool "Preemptible Kernel"
-        help
-          This option reduces the latency of the kernel when reacting to
-          real-time or interactive events by allowing a low priority process to
-          be preempted even if it is in kernel mode executing a system call.
-          This allows applications to run more reliably even when the system is
-          under load.
-
-          Say Y here if you are building a kernel for a desktop, embedded
-          or real-time system.  Say N if you are unsure.
+source "kernel/Kconfig.preempt"
 
 source "mm/Kconfig"
 
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 9eb48c0..6dd8655 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -42,7 +42,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 3a9ed95..e86fbd3 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -43,7 +43,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index c420d9f..546a772 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -43,7 +43,7 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 4c9ffc4..9aecfce 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -46,7 +46,7 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 3dbb398..797acf9 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -53,7 +53,7 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 4a060fc..0a06b13 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -48,7 +48,7 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_SLUB=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 03172dc..0210545 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -53,8 +53,7 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S
index a9bd71a..8808565 100644
--- a/arch/ia64/hp/sim/boot/boot_head.S
+++ b/arch/ia64/hp/sim/boot/boot_head.S
@@ -26,6 +26,7 @@ GLOBAL_ENTRY(_start)
 	movl sp = stack_mem+16384-16
 	bsw.1
 	br.call.sptk.many rp=start_bootloader
+0:	nop 0		  /* dummy nop to make unwinding work */
 END(_start)
 
 /*
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index 15c08d5..8c6ec70 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -113,10 +113,8 @@ processor_get_freq (
 
 	saved_mask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
-	if (smp_processor_id() != cpu) {
-		ret = -EAGAIN;
+	if (smp_processor_id() != cpu)
 		goto migrate_end;
-	}
 
 	/* processor_get_pstate gets the instantaneous frequency */
 	ret = processor_get_pstate(&value);
@@ -125,7 +123,7 @@ processor_get_freq (
 		set_cpus_allowed(current, saved_mask);
 		printk(KERN_WARNING "get performance failed with error %d\n",
 		       ret);
-		ret = -EAGAIN;
+		ret = 0;
 		goto migrate_end;
 	}
 	clock_freq = extract_clock(data, value, cpu);
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index cc3ee4e..44be1c95 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -33,6 +33,11 @@ void ack_bad_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_IA64_GENERIC
+ia64_vector __ia64_irq_to_vector(int irq)
+{
+	return irq_cfg[irq].vector;
+}
+
 unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
 {
 	return __get_cpu_var(vector_irq)[vec];
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index ff28620..63b73f3 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -2018,22 +2018,26 @@ ia64_mca_late_init(void)
 
 		if (cpe_vector >= 0) {
 			/* If platform supports CPEI, enable the irq. */
-			cpe_poll_enabled = 0;
-			for (irq = 0; irq < NR_IRQS; ++irq)
-				if (irq_to_vector(irq) == cpe_vector) {
-					desc = irq_desc + irq;
-					desc->status |= IRQ_PER_CPU;
-					setup_irq(irq, &mca_cpe_irqaction);
-					ia64_cpe_irq = irq;
-				}
-			ia64_mca_register_cpev(cpe_vector);
-			IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n", __FUNCTION__);
-		} else {
-			/* If platform doesn't support CPEI, get the timer going. */
-			if (cpe_poll_enabled) {
-				ia64_mca_cpe_poll(0UL);
-				IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
+			irq = local_vector_to_irq(cpe_vector);
+			if (irq > 0) {
+				cpe_poll_enabled = 0;
+				desc = irq_desc + irq;
+				desc->status |= IRQ_PER_CPU;
+				setup_irq(irq, &mca_cpe_irqaction);
+				ia64_cpe_irq = irq;
+				ia64_mca_register_cpev(cpe_vector);
+				IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n",
+					__FUNCTION__);
+				return 0;
 			}
+			printk(KERN_ERR "%s: Failed to find irq for CPE "
+					"interrupt handler, vector %d\n",
+					__FUNCTION__, cpe_vector);
+		}
+		/* If platform doesn't support CPEI, get the timer going. */
+		if (cpe_poll_enabled) {
+			ia64_mca_cpe_poll(0UL);
+			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
 		}
 	}
 #endif
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 4158906..c613fc0 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -198,9 +198,13 @@ default_idle (void)
 {
 	local_irq_enable();
 	while (!need_resched()) {
-		if (can_do_pal_halt)
-			safe_halt();
-		else
+		if (can_do_pal_halt) {
+			local_irq_disable();
+			if (!need_resched()) {
+				safe_halt();
+			}
+			local_irq_enable();
+		} else
 			cpu_relax();
 	}
 }
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 00f8032..122444a 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -951,10 +951,14 @@ access_uarea (struct task_struct *child, unsigned long addr,
 			return 0;
 
 		      case PT_CR_IPSR:
-			if (write_access)
-				pt->cr_ipsr = ((*data & IPSR_MASK)
+			if (write_access) {
+				unsigned long tmp = *data;
+				/* psr.ri==3 is a reserved value: SDM 2:25 */
+				if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
+					tmp &= ~IA64_PSR_RI;
+				pt->cr_ipsr = ((tmp & IPSR_MASK)
 					       | (pt->cr_ipsr & ~IPSR_MASK));
-			else
+			} else
 				*data = (pt->cr_ipsr & IPSR_MASK);
 			return 0;
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index cd9a37a..407efea 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -389,6 +389,13 @@ early_console_setup (char *cmdline)
 	if (!efi_setup_pcdp_console(cmdline))
 		earlycons++;
 #endif
+#ifdef CONFIG_HP_SIMSERIAL_CONSOLE
+	{
+		extern struct console hpsim_cons;
+		register_console(&hpsim_cons);
+		earlycons++;
+	}
+#endif
 
 	return (earlycons) ? 0 : -1;
 }
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 83e8067..00232b4 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -20,6 +20,8 @@ PHDRS {
   code   PT_LOAD;
   percpu PT_LOAD;
   data   PT_LOAD;
+  note   PT_NOTE;
+  unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */
 }
 SECTIONS
 {
@@ -62,6 +64,9 @@ SECTIONS
 
   /* Read-only data */
 
+  NOTES :code :note		/* put .notes in text and mark in PT_NOTE  */
+  code_continues : {} :code	/* switch back to regular program...  */
+
   /* Exception table */
   . = ALIGN(16);
   __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET)
@@ -99,7 +104,8 @@ SECTIONS
 	  __start_unwind = .;
 	  *(.IA_64.unwind*)
 	  __end_unwind = .;
-	}
+	} :code :unwind
+  code_continues2 : {} : code
 
   RODATA
 
@@ -276,10 +282,6 @@ SECTIONS
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
   /* These must appear regardless of  .  */
-  /* Discard them for now since Intel SoftSDV cannot handle them.
-  .comment 0 : { *(.comment) }
-  .note 0 : { *(.note) }
-  */
   /DISCARD/ : { *(.comment) }
   /DISCARD/ : { *(.note) }
 }
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 73ccb60..9150ffa 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -112,11 +112,17 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 	down_read(&mm->mmap_sem);
 
 	vma = find_vma_prev(mm, address, &prev_vma);
-	if (!vma)
+	if (!vma && !prev_vma )
 		goto bad_area;
 
-	/* find_vma_prev() returns vma such that address < vma->vm_end or NULL */
-	if (address < vma->vm_start)
+        /*
+         * find_vma_prev() returns vma such that address < vma->vm_end or NULL
+         *
+         * May find no vma, but could be that the last vm area is the
+         * register backing store that needs to expand upwards, in
+         * this case vma will be null, but prev_vma will ne non-null
+         */
+        if (( !vma && prev_vma ) || (address < vma->vm_start) )
 		goto check_expansion;
 
   good_area:
@@ -172,6 +178,8 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re
 
   check_expansion:
 	if (!(prev_vma && (prev_vma->vm_flags & VM_GROWSUP) && (address == prev_vma->vm_end))) {
+		if (!vma)
+			goto bad_area;
 		if (!(vma->vm_flags & VM_GROWSDOWN))
 			goto bad_area;
 		if (REGION_NUMBER(address) != REGION_NUMBER(vma->vm_start)
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 7f6d236..3600473 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -256,6 +256,13 @@ struct irq_chip irq_type_sn = {
 	.set_affinity	= sn_set_affinity_irq
 };
 
+ia64_vector sn_irq_to_vector(int irq)
+{
+	if (irq >= IA64_NUM_VECTORS)
+		return 0;
+	return (ia64_vector)irq;
+}
+
 unsigned int sn_local_vector_to_irq(u8 vector)
 {
 	return (CPU_VECTOR_TO_IRQ(smp_processor_id(), vector));
@@ -398,7 +405,10 @@ sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info)
 	struct sn_pcibus_provider *pci_provider;
 
 	pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
-	if (pci_provider && pci_provider->force_interrupt)
+
+	/* Don't force an interrupt if the irq has been disabled */
+	if (!(irq_desc[sn_irq_info->irq_irq].status & IRQ_DISABLED) &&
+	    pci_provider && pci_provider->force_interrupt)
 		(*pci_provider->force_interrupt)(sn_irq_info);
 }
 
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 7e6d5fb..ed3a4ca 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -62,7 +62,6 @@ EXPORT_SYMBOL(m68k_num_memory);
 int m68k_realnum_memory;
 EXPORT_SYMBOL(m68k_realnum_memory);
 unsigned long m68k_memoffset;
-EXPORT_SYMBOL(m68k_memoffset);
 struct mem_info m68k_memory[NUM_MEMINFO];
 EXPORT_SYMBOL(m68k_memory);
 
@@ -200,7 +199,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 		       (m68k_num_memory - 1));
 		m68k_num_memory = 1;
 	}
-	m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
 #endif
 }
 
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index c422457..59fe285 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -19,6 +19,8 @@ SECTIONS
 	*(.gnu.warning)
 	} :text = 0x4e75
 
+  _etext = .;			/* End of text section */
+
   . = ALIGN(16);		/* Exception table */
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
@@ -26,8 +28,6 @@ SECTIONS
 
   RODATA
 
-  _etext = .;			/* End of text section */
-
   .data : {			/* Data */
 	DATA_DATA
 	CONSTRUCTORS
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 7d571a2..30d34f2 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -210,11 +210,7 @@ void __init paging_init(void)
 	int i;
 
 #ifdef DEBUG
-	{
-		extern unsigned long availmem;
-		printk ("start of paging_init (%p, %lx)\n",
-			kernel_pg_dir, availmem);
-	}
+	printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem);
 #endif
 
 	/* Fix the cache mode in the page descriptors for the 680[46]0.  */
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 846f975..47502d5 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -28,6 +28,7 @@
 #include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
+#include <linux/fs.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c
index 48e6b33..15d62c5 100644
--- a/arch/m68knommu/kernel/sys_m68k.c
+++ b/arch/m68knommu/kernel/sys_m68k.c
@@ -18,6 +18,7 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
+#include <linux/fs.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3b404b7..04797b2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -28,7 +28,6 @@ config BASLER_EXCITE
 	select MIPS_RM9122
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	help
@@ -126,6 +125,7 @@ config LEMOTE_FULONG
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
 	help
 	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
@@ -192,8 +192,7 @@ config MIPS_MALTA
 	  board.
 
 config MIPS_SEAD
-	bool "MIPS SEAD board (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "MIPS SEAD board"
 	select IRQ_CPU
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
@@ -528,6 +527,7 @@ config TOSHIBA_JMR3927
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_TX3927
+	select IRQ_TXX9
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_TX39XX
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -540,7 +540,9 @@ config TOSHIBA_RBTX4927
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select I8259
+	select IRQ_CPU
+	select IRQ_TXX9
+	select I8259 if TOSHIBA_FPCIB0
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_TX49XX
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -555,12 +557,11 @@ config TOSHIBA_RBTX4927
 
 config TOSHIBA_RBTX4938
 	bool "Toshiba RBTX4938 board"
-	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
-	select GENERIC_ISA_DMA
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select I8259
+	select IRQ_CPU
+	select IRQ_TXX9
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_TX49XX
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -604,7 +605,6 @@ source "arch/mips/sibyte/Kconfig"
 source "arch/mips/tx4927/Kconfig"
 source "arch/mips/tx4938/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
-source "arch/mips/philips/pnx8550/common/Kconfig"
 
 endmenu
 
@@ -693,9 +693,9 @@ config EARLY_PRINTK
 config SYS_HAS_EARLY_PRINTK
 	bool
 
-config GENERIC_ISA_DMA
+config HOTPLUG_CPU
 	bool
-	select ZONE_DMA
+	default n
 
 config I8259
 	bool
@@ -712,9 +712,13 @@ config MIPS_DISABLE_OBSOLETE_IDE
 config NO_IOPORT
 	def_bool n
 
+config GENERIC_ISA_DMA
+	bool
+	select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
+
 config GENERIC_ISA_DMA_SUPPORT_BROKEN
 	bool
-	select ZONE_DMA
+	select GENERIC_ISA_DMA
 
 config GENERIC_GPIO
 	bool
@@ -768,6 +772,9 @@ config IRQ_MSP_SLP
 config IRQ_MSP_CIC
 	bool
 
+config IRQ_TXX9
+	bool
+
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1427,8 +1434,7 @@ config SB1_PASS_2_1_WORKAROUNDS
 	default y
 
 config 64BIT_PHYS_ADDR
-	bool "Support for 64-bit physical address space"
-	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
+	bool
 
 config CPU_HAS_LLSC
 	bool
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index abea880..29c95d9 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -136,6 +136,7 @@ config SOC_AU1200
 
 config SOC_AU1X00
 	bool
+	select 64BIT_PHYS_ADDR
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 7abe420..8527856 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -131,12 +131,12 @@ int au1xxx_gpio_direction_input(unsigned gpio)
 {
 	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
-		;
+		return -ENODEV;
 #else
 		return au1xxx_gpio2_direction_input(gpio);
 #endif
-	else
-		return au1xxx_gpio1_direction_input(gpio);
+
+	return au1xxx_gpio1_direction_input(gpio);
 }
 
 EXPORT_SYMBOL(au1xxx_gpio_direction_input);
@@ -145,12 +145,12 @@ int au1xxx_gpio_direction_output(unsigned gpio, int value)
 {
 	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
-		;
+		return -ENODEV;
 #else
 		return au1xxx_gpio2_direction_output(gpio, value);
 #endif
-	else
-		return au1xxx_gpio1_direction_output(gpio, value);
+
+	return au1xxx_gpio1_direction_output(gpio, value);
 }
 
 EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 67a80f4..700a3a2 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -663,8 +663,8 @@ CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-CONFIG_SIBYTE_SB1250_DUART=y
-CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 
 #
 # Serial drivers
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 4dc3197..8ecbbb2 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.23-rc2
+# Wed Aug  8 10:23:16 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
@@ -73,6 +60,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -82,6 +71,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -103,7 +93,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -119,7 +108,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,48 +121,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -187,32 +174,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -232,16 +217,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -254,10 +236,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -267,7 +246,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -309,20 +287,13 @@ CONFIG_TCP_MD5SIG=y
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -348,7 +319,17 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -361,30 +342,10 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -397,19 +358,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
@@ -424,15 +375,16 @@ CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -440,16 +392,9 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -460,30 +405,17 @@ CONFIG_IDE_GENERIC=y
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -497,22 +429,16 @@ CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -521,6 +447,7 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
@@ -539,50 +466,15 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -592,15 +484,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -608,6 +492,7 @@ CONFIG_NETXEN_NIC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -624,6 +509,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -658,34 +544,17 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -693,32 +562,33 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -726,65 +596,16 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -798,18 +619,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
 
 #
-# RTC drivers
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_VR41XX=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_VR41XX=y
+
+#
 # DMA Engine support
 #
 # CONFIG_DMA_ENGINE is not set
@@ -823,12 +655,9 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -836,8 +665,14 @@ CONFIG_RTC_DRV_VR41XX=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
@@ -852,7 +687,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -879,7 +714,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -905,14 +740,12 @@ CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
+# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -920,7 +753,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -936,10 +768,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -957,7 +786,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 
@@ -966,10 +794,6 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
@@ -990,6 +814,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -1008,10 +833,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
@@ -1019,10 +841,13 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 6d6a01b..ebcb7ad 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc2
-# Fri May 25 11:17:29 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug  7 22:12:54 2007
 #
 CONFIG_MIPS=y
 
@@ -13,33 +13,35 @@ CONFIG_MIPS=y
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -54,6 +56,7 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -64,6 +67,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -101,7 +105,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -117,43 +120,40 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -185,19 +185,17 @@ CONFIG_SLAB=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -236,10 +234,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -286,20 +281,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -335,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -347,12 +331,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -430,20 +409,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -453,17 +420,11 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -471,6 +432,7 @@ CONFIG_BLK_DEV_LOOP=y
 #
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -492,6 +454,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -499,45 +462,8 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
@@ -593,10 +519,6 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -612,41 +534,24 @@ CONFIG_PATA_VIA=y
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=y
 CONFIG_TULIP=y
@@ -661,10 +566,6 @@ CONFIG_TULIP=y
 # CONFIG_NET_PCI is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Token Ring devices
-#
 # CONFIG_TR is not set
 
 #
@@ -672,6 +573,16 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -682,15 +593,7 @@ CONFIG_TULIP=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -698,6 +601,7 @@ CONFIG_TULIP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
 
 #
 # Userland interfaces
@@ -705,7 +609,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -725,7 +629,6 @@ CONFIG_INPUT_COBALT_BTNS=y
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_POLLDEV=y
 
 #
 # Hardware I/O ports
@@ -761,24 +664,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
@@ -788,11 +682,8 @@ CONFIG_DEVPORT=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 
 #
@@ -817,6 +708,7 @@ CONFIG_DEVPORT=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -829,55 +721,131 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-# CONFIG_HID is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
-# LED devices
+# USB Imaging devices
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
 
 #
-# LED drivers
+# USB port drivers
 #
 
 #
-# LED Triggers
+# USB Serial Converter support
 #
+# CONFIG_USB_SERIAL is not set
 
 #
-# InfiniBand support
+# USB Miscellaneous drivers
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB DSL modem support
 #
 
 #
-# Real Time Clock
+# USB Gadget Support
 #
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -894,10 +862,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 
@@ -906,8 +870,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_CMOS=y
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -928,6 +894,11 @@ CONFIG_RTC_DRV_CMOS=y
 #
 
 #
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1032,7 +1003,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1074,10 +1044,6 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 # CONFIG_CRYPTO is not set
 
 #
@@ -1088,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 5467d75..d0d07fa 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:28 2007
+# Linux kernel version: 2.6.23-rc2
+# Wed Aug  8 10:36:25 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_CASIO_E55=y
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
@@ -72,6 +59,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -81,6 +70,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -102,7 +92,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -118,7 +107,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -132,45 +120,44 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -183,32 +170,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -226,6 +211,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -234,10 +220,6 @@ CONFIG_MMU=y
 #
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -247,10 +229,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -267,46 +246,18 @@ CONFIG_PM=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
@@ -321,15 +272,16 @@ CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -337,43 +289,10 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -381,14 +300,12 @@ CONFIG_IDE_GENERIC=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -400,6 +317,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -433,45 +351,16 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
+# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -479,31 +368,32 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -512,65 +402,49 @@ CONFIG_GPIO_VR41XX=y
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# LED Triggers
+# SPI RTC drivers
 #
 
 #
-# InfiniBand support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# on-CPU RTC drivers
 #
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_VR41XX=y
 
 #
 # DMA Engine support
@@ -586,12 +460,9 @@ CONFIG_HID=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -599,8 +470,14 @@ CONFIG_HID=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
@@ -614,7 +491,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -687,7 +564,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 
@@ -696,10 +572,6 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 # CONFIG_CRYPTO is not set
 
 #
@@ -707,8 +579,11 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
 #
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 934d8a0..670039b 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:32 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug  7 12:39:49 2007
 #
 CONFIG_MIPS=y
 
@@ -9,52 +9,40 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -67,6 +55,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -82,6 +73,7 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -122,8 +114,6 @@ CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -139,6 +129,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -152,35 +144,33 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -193,32 +183,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -237,6 +225,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_EISA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_EISA is not set
 CONFIG_MMU=y
 
@@ -245,10 +234,6 @@ CONFIG_MMU=y
 #
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -261,7 +246,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_SUSPEND is not set
 
 #
 # Networking
@@ -271,7 +256,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -308,10 +292,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
 CONFIG_IP_VS=m
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
@@ -346,10 +326,11 @@ CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
@@ -371,8 +352,6 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -380,6 +359,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -398,11 +378,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -423,6 +405,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -490,25 +473,13 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -527,9 +498,6 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -538,6 +506,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -562,10 +531,16 @@ CONFIG_NET_CLS_U32=m
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_CLS_POLICE=y
 # CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -574,14 +549,26 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -593,47 +580,19 @@ CONFIG_FIB_RULES=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -641,6 +600,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -663,6 +623,7 @@ CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -670,51 +631,21 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -728,36 +659,25 @@ CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_DM9000 is not set
 CONFIG_SGISEEQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -765,15 +685,7 @@ CONFIG_SGISEEQ=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -781,6 +693,7 @@ CONFIG_SGISEEQ=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -806,9 +719,16 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2_ALPS is not set
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -844,15 +764,7 @@ CONFIG_SERIAL_CORE=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -864,20 +776,10 @@ CONFIG_INDYDOG=m
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_SGI_DS1286=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -885,32 +787,33 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -920,31 +823,20 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_SGI_NEWPORT_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -957,36 +849,8 @@ CONFIG_HID=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1003,12 +867,9 @@ CONFIG_HID=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1121,6 +982,7 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1136,7 +998,6 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1158,6 +1019,7 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
 
 #
 # Native Language Support
@@ -1207,8 +1069,6 @@ CONFIG_NLS_UTF8=m
 # Distributed Lock Manager
 #
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
@@ -1227,7 +1087,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1237,12 +1096,9 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ABLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
@@ -1261,6 +1117,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -1279,10 +1136,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
@@ -1290,7 +1144,9 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
@@ -1301,3 +1157,4 @@ CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index eb35f75..49bcc58 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,66 +1,52 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:32 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug  7 13:04:24 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 CONFIG_SGI_IP27=y
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_SGI_SN_M_MODE=y
 # CONFIG_SGI_SN_N_MODE is not set
 # CONFIG_MAPPED_KERNEL is not set
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
-CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -72,6 +58,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
@@ -82,6 +71,7 @@ CONFIG_BOOT_ELF64=y
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -119,7 +109,6 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -141,7 +130,8 @@ CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_64=y
@@ -161,36 +151,34 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_BKL=y
 # CONFIG_MIPS_INSANE_LARGE is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CPUSETS=y
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -203,18 +191,19 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -222,12 +211,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -248,16 +234,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -279,7 +262,6 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -289,7 +271,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -331,20 +312,13 @@ CONFIG_TCP_MD5SIG=y
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -363,9 +337,6 @@ CONFIG_NETWORK_SECMARK=y
 #
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -374,6 +345,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -398,10 +370,15 @@ CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
 CONFIG_NET_CLS_POLICE=y
 # CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -410,13 +387,24 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_RFKILL=m
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -429,30 +417,10 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -463,21 +431,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -485,6 +443,7 @@ CONFIG_SGI_IOC4=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
@@ -507,6 +466,7 @@ CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -517,10 +477,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -551,15 +508,7 @@ CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=m
@@ -578,6 +527,8 @@ CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+# CONFIG_DM_DELAY is not set
 
 #
 # Fusion MPT device support
@@ -590,30 +541,18 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -627,30 +566,21 @@ CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
+CONFIG_ICPLUS_PHY=m
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_AX88796=m
 CONFIG_SGI_IOC3_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
@@ -661,35 +591,57 @@ CONFIG_SGI_IOC3_ETH=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+CONFIG_VIA_VELOCITY=m
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_QLA3XXX=m
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+CONFIG_IPW2100_DEBUG=y
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+CONFIG_IPW2200_DEBUG=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_PIO=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -700,15 +652,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -756,34 +700,17 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_RTC is not set
 CONFIG_SGI_IP27_RTC=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -791,43 +718,40 @@ CONFIG_SGI_IP27_RTC=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -841,37 +765,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -888,12 +784,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+CONFIG_UIO=y
+# CONFIG_UIO_CIF is not set
 
 #
 # File systems
@@ -992,6 +886,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -999,7 +894,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1021,6 +915,7 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
 
 #
 # Native Language Support
@@ -1031,8 +926,6 @@ CONFIG_SGI_PARTITION=y
 # Distributed Lock Manager
 #
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
@@ -1051,7 +944,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 CONFIG_SYS_SUPPORTS_KGDB=y
@@ -1062,12 +954,13 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ABLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
@@ -1086,6 +979,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -1104,21 +998,21 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 95a72d2..eb96791 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 15 00:40:40 2007
+# Linux kernel version: 2.6.23-rc1
+# Thu Aug  2 23:07:36 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 CONFIG_TOSHIBA_JMR3927=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -66,10 +53,12 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_TXX9=y
 CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -77,6 +66,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -112,21 +102,17 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -139,37 +125,30 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPERIMENTAL is not set
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -181,23 +160,20 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -221,6 +197,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
@@ -228,10 +205,6 @@ CONFIG_MMU=y
 #
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -251,7 +224,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -266,7 +238,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -280,38 +251,17 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 
 #
 # QoS and/or fair queueing
@@ -325,7 +275,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -337,34 +294,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -372,16 +308,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -389,16 +316,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -409,46 +329,28 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
 #
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -464,76 +366,28 @@ CONFIG_TC35815=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -541,6 +395,7 @@ CONFIG_TC35815=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -557,6 +412,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -607,33 +463,15 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -641,17 +479,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
 # Multifunction device drivers
@@ -662,75 +492,31 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -744,17 +530,28 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
 
 #
-# RTC drivers
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+
+#
 # DMA Engine support
 #
 # CONFIG_DMA_ENGINE is not set
@@ -768,24 +565,19 @@ CONFIG_RTC_DRV_DS1742=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -820,18 +612,11 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
 #
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -844,21 +629,16 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -872,16 +652,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -892,7 +662,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -901,10 +670,6 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 # CONFIG_CRYPTO is not set
 
 #
@@ -913,8 +678,11 @@ CONFIG_CMDLINE=""
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index fbfa568..fbd2d80 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:55 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug  7 12:59:29 2007
 #
 CONFIG_MIPS=y
 
@@ -9,52 +9,40 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -67,25 +55,28 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_I8259=y
 CONFIG_MIPS_BONITO64=y
 CONFIG_MIPS_MSC=y
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_GT64120=y
+CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 CONFIG_CPU_MIPS32_R2=y
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -131,14 +122,14 @@ CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT_DISABLED is not set
 CONFIG_MIPS_MT_SMP=y
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_MIPS_MT=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_MIPS_MT_FPAFF=y
-# CONFIG_64BIT_PHYS_ADDR is not set
+# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 # CONFIG_CPU_HAS_SMARTMIPS is not set
 CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
 CONFIG_CPU_MIPSR2_SRS=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -157,8 +148,11 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS_DEFAULT_2=y
 CONFIG_NR_CPUS=2
 # CONFIG_HZ_48 is not set
 CONFIG_HZ_100=y
@@ -174,35 +168,33 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_PREEMPT_BKL=y
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CPUSETS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -215,18 +207,19 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -234,14 +227,11 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -261,16 +251,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -286,7 +273,6 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -296,7 +282,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -314,7 +299,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
@@ -342,10 +326,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
 CONFIG_IP_VS=m
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
@@ -380,6 +360,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -405,8 +386,6 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -414,6 +393,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -432,11 +412,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -458,6 +440,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -549,25 +532,13 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=m
@@ -591,9 +562,6 @@ CONFIG_IPDDP_DECAP=y
 #
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -602,6 +570,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -626,10 +595,16 @@ CONFIG_NET_CLS_U32=m
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_CLS_POLICE=y
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -638,14 +613,26 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -658,15 +645,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -710,7 +689,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -737,30 +715,23 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# UBI - Unsorted block images
 #
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
 
 #
-# Block devices
+# UBI debugging options
 #
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=m
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
@@ -775,21 +746,11 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
@@ -805,6 +766,7 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
@@ -812,12 +774,12 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
@@ -846,7 +808,6 @@ CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -854,6 +815,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
@@ -876,6 +838,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -883,12 +846,8 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
@@ -925,15 +884,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -952,6 +903,8 @@ CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+# CONFIG_DM_DELAY is not set
 
 #
 # Fusion MPT device support
@@ -964,30 +917,18 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -1000,23 +941,17 @@ CONFIG_LXT_PHY=m
 CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_AX88796=m
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -1026,6 +961,7 @@ CONFIG_PCNET32=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
+CONFIG_TC35815=m
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
@@ -1040,10 +976,7 @@ CONFIG_PCNET32=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
@@ -1054,36 +987,58 @@ CONFIG_PCNET32=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_MLX4_CORE is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# Wireless LAN
+#
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_HERMES=m
+CONFIG_PLX_HERMES=m
+CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
+CONFIG_PCI_HERMES=m
+CONFIG_ATMEL=m
+CONFIG_PCI_ATMEL=m
+CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_PIO=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -1094,15 +1049,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -1110,6 +1057,7 @@ CONFIG_NETXEN_NIC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -1129,6 +1077,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -1171,32 +1120,16 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
 CONFIG_RTC=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -1204,32 +1137,33 @@ CONFIG_RTC=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -1237,22 +1171,15 @@ CONFIG_RTC=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1266,37 +1193,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1313,12 +1212,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
 
 #
 # File systems
@@ -1451,6 +1348,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1458,7 +1356,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1531,7 +1428,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1540,12 +1436,13 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ABLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
@@ -1564,6 +1461,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -1582,10 +1480,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1593,7 +1488,9 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
@@ -1604,3 +1501,4 @@ CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 239810b..8334350 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:35 2007
+# Linux kernel version: 2.6.23-rc2
+# Wed Aug  8 15:09:51 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
@@ -73,6 +60,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -82,6 +71,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -103,7 +93,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -119,7 +108,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,48 +121,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -187,32 +174,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -232,29 +217,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-# CONFIG_CARDBUS is not set
-
-#
-# PC-card bridges
-#
-# CONFIG_YENTA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_PCMCIA_VRC4173 is not set
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -267,10 +236,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -280,7 +246,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -313,26 +278,17 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -358,14 +314,17 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -378,30 +337,10 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -412,19 +351,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
@@ -435,20 +364,20 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -456,16 +385,9 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -476,135 +398,38 @@ CONFIG_IDE_GENERIC=y
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
 # CONFIG_NET_ETHERNET is not set
 CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -614,15 +439,7 @@ CONFIG_PCMCIA_AXNET=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -630,14 +447,12 @@ CONFIG_PCMCIA_AXNET=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -649,18 +464,14 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -680,46 +491,25 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_VR41XX is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_GPIO_VR41XX is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -727,33 +517,33 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -761,22 +551,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -787,8 +568,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -802,6 +583,7 @@ CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -819,43 +601,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
 #
@@ -887,6 +635,7 @@ CONFIG_USB_PEGASUS=m
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -897,38 +646,43 @@ CONFIG_USB_PEGASUS=m
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
-#
-
-#
-# LED Triggers
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# InfiniBand support
+# SPI RTC drivers
 #
-# CONFIG_INFINIBAND is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Real Time Clock
+# on-CPU RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_VR41XX=y
 
 #
 # DMA Engine support
@@ -944,12 +698,9 @@ CONFIG_USB_PEGASUS=m
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -973,7 +724,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1005,7 +756,6 @@ CONFIG_CONFIGFS_FS=m
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1029,6 +779,7 @@ CONFIG_NFS_FS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1036,7 +787,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1052,10 +802,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -1073,73 +820,26 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
-CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
index 9913980..9383a59 100644
--- a/arch/mips/configs/rbhma4200_defconfig
+++ b/arch/mips/configs/rbhma4200_defconfig
@@ -1,58 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Wed May  9 23:44:19 2007
+# Linux kernel version: 2.6.23-rc1
+# Thu Aug  2 22:55:57 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 CONFIG_TOSHIBA_RBTX4927=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_TOSHIBA_FPCIB0 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -65,17 +54,20 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_TXX9=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -114,22 +106,18 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,31 +130,24 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPERIMENTAL is not set
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -175,7 +156,6 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -187,7 +167,11 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
@@ -195,19 +179,11 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -273,7 +249,6 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -288,38 +263,17 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 
 #
 # QoS and/or fair queueing
@@ -333,14 +287,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 
 #
 # Wireless
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -354,30 +306,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -389,18 +324,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -408,16 +332,9 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -428,83 +345,34 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
 #
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
@@ -512,28 +380,13 @@ CONFIG_NE2000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -577,29 +430,14 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
@@ -608,11 +446,8 @@ CONFIG_DEVPORT=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 
 #
@@ -624,11 +459,8 @@ CONFIG_DEVPORT=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -640,56 +472,17 @@ CONFIG_DEVPORT=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -706,19 +499,18 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -739,24 +531,19 @@ CONFIG_RTC_DRV_DS1742=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -793,18 +580,11 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
 #
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -818,7 +598,6 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
@@ -826,15 +605,10 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -848,16 +622,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -877,10 +641,6 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 # CONFIG_CRYPTO is not set
 
 #
@@ -889,7 +649,9 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index 40453cd..d1b56cc 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -1,48 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc5
-# Fri Jun 22 21:39:45 2007
+# Linux kernel version: 2.6.23-rc1
+# Thu Aug  2 22:59:53 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 CONFIG_TOSHIBA_RBTX4938=y
+# CONFIG_WR_PPMC is not set
 
 #
 # Multiplex Pin Select
@@ -61,17 +60,16 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_I8259=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_TXX9=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
 
 #
 # CPU selection
@@ -114,22 +112,18 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -142,31 +136,24 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
-CONFIG_EXPERIMENTAL=y
+# CONFIG_EXPERIMENTAL is not set
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -175,7 +162,6 @@ CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -199,19 +185,11 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
@@ -277,7 +255,6 @@ CONFIG_IP_PNP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -292,26 +269,17 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 
 #
 # QoS and/or fair queueing
@@ -325,14 +293,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 
 #
 # Wireless
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -346,30 +312,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -381,14 +330,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -396,12 +338,9 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -412,39 +351,28 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
 #
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NE2000=y
@@ -461,14 +389,12 @@ CONFIG_TC35815=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -480,22 +406,11 @@ CONFIG_TC35815=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -534,24 +449,14 @@ CONFIG_SERIAL_TXX9_STDSERIAL=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
@@ -564,19 +469,15 @@ CONFIG_SPI_MASTER=y
 #
 # SPI Master Controller Drivers
 #
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_TXX9=y
 
 #
 # SPI Protocol Masters
 #
 CONFIG_SPI_AT25=y
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 
 #
@@ -601,56 +502,17 @@ CONFIG_SPI_AT25=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -667,10 +529,6 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 CONFIG_RTC_DRV_RS5C348=y
@@ -681,8 +539,10 @@ CONFIG_RTC_DRV_RS5C348=y
 #
 # CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -703,16 +563,19 @@ CONFIG_RTC_DRV_RS5C348=y
 #
 
 #
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -749,18 +612,11 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
 #
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -774,7 +630,6 @@ CONFIG_RAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
@@ -782,15 +637,10 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -804,16 +654,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 
 #
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
@@ -833,10 +673,6 @@ CONFIG_SYS_SUPPORTS_KGDB=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 # CONFIG_CRYPTO is not set
 
 #
@@ -847,6 +683,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index e72fdf3..93f9e83 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -655,8 +655,8 @@ CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-CONFIG_SIBYTE_SB1250_DUART=y
-CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 
 #
 # Serial drivers
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index e9f2cef..326aa7a 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc6
-# Sun Apr 15 01:06:01 2007
+# Linux kernel version: 2.6.23-rc2
+# Wed Aug  8 16:11:47 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
@@ -76,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -85,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -106,7 +96,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -122,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -136,46 +124,44 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -191,32 +177,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -236,16 +220,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -258,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -271,14 +249,9 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -288,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
@@ -305,34 +277,25 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -358,10 +321,20 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
@@ -372,30 +345,10 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -412,16 +365,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -429,16 +373,9 @@ CONFIG_SGI_IOC4=m
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -449,30 +386,17 @@ CONFIG_SGI_IOC4=m
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -486,29 +410,46 @@ CONFIG_CICADA_PHY=m
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
@@ -520,35 +461,29 @@ CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+CONFIG_VIA_VELOCITY=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
+# CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -558,15 +493,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -574,6 +501,7 @@ CONFIG_NETXEN_NIC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -590,6 +518,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -624,35 +553,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 CONFIG_GPIO_TB0219=y
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -660,17 +572,9 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
 # Multifunction device drivers
@@ -681,17 +585,20 @@ CONFIG_GPIO_VR41XX=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -704,16 +611,8 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -724,8 +623,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -735,7 +634,6 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -743,6 +641,7 @@ CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -760,43 +659,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -840,37 +705,9 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -884,18 +721,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
 
 #
-# RTC drivers
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_VR41XX=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_VR41XX=y
+
+#
 # DMA Engine support
 #
 # CONFIG_DMA_ENGINE is not set
@@ -909,12 +757,9 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -922,8 +767,14 @@ CONFIG_RTC_DRV_VR41XX=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
@@ -938,7 +789,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -965,7 +816,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1003,6 +854,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1010,7 +862,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1026,10 +877,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -1047,7 +895,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
@@ -1056,63 +903,20 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index aea6756..9fd0fae 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,68 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:41 2007
+# Linux kernel version: 2.6.23-rc2
+# Thu Aug  9 11:16:55 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
 CONFIG_TANBAC_TB022X=y
-CONFIG_TANBAC_TB0226=y
-# CONFIG_TANBAC_TB0287 is not set
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_TANBAC_TB0219 is not set
+CONFIG_TANBAC_TB0226=y
+# CONFIG_TANBAC_TB0287 is not set
 CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -75,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -84,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -105,7 +96,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -121,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -135,48 +124,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -189,32 +177,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -234,16 +220,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -256,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -269,14 +249,9 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -286,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
@@ -302,34 +276,25 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -355,10 +320,20 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
@@ -369,30 +344,10 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -407,19 +362,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -427,6 +372,7 @@ CONFIG_SGI_IOC4=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -448,6 +394,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -458,51 +405,8 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -516,59 +420,26 @@ CONFIG_SCSI_AIC94XX=m
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -577,6 +448,7 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
@@ -591,50 +463,25 @@ CONFIG_E100=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -645,15 +492,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -661,6 +500,7 @@ CONFIG_NETXEN_NIC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -677,6 +517,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -711,35 +552,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_TANBAC_TB0219 is not set
+# CONFIG_GPIO_TB0219 is not set
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -747,33 +571,33 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -781,22 +605,13 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -807,8 +622,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -818,7 +633,6 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -826,11 +640,12 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_ACM is not set
+CONFIG_USB_ACM=y
 # CONFIG_USB_PRINTER is not set
 
 #
@@ -854,44 +669,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
 #
@@ -924,6 +705,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -934,37 +716,9 @@ CONFIG_USB_STORAGE=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -978,18 +732,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
 
 #
-# RTC drivers
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_VR41XX=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_VR41XX=y
+
+#
 # DMA Engine support
 #
 # CONFIG_DMA_ENGINE is not set
@@ -1003,12 +768,9 @@ CONFIG_RTC_DRV_VR41XX=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1032,7 +794,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -1059,7 +821,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1097,6 +859,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1104,7 +867,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1120,10 +882,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -1141,7 +900,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 
@@ -1150,62 +908,20 @@ CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
-CONFIG_LIBCRC32C=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 66383ec..499b6bd 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -1,68 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc1
-# Thu Feb 22 10:38:09 2007
+# Linux kernel version: 2.6.23-rc2
+# Thu Aug  9 14:03:54 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
 # CONFIG_NEC_CMBVR4133 is not set
 CONFIG_TANBAC_TB022X=y
-# CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
+# CONFIG_TANBAC_TB0219 is not set
+# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
 CONFIG_PCI_VR41XX=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
@@ -75,6 +63,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -84,6 +74,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -105,7 +96,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -121,7 +111,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -135,86 +124,83 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -234,15 +220,14 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
@@ -254,10 +239,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -267,14 +249,9 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -284,7 +261,6 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
@@ -301,9 +277,9 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
@@ -317,6 +293,8 @@ CONFIG_TCP_CONG_HTCP=m
 # CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_TCP_CONG_LP is not set
 # CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
 CONFIG_DEFAULT_BIC=y
 # CONFIG_DEFAULT_CUBIC is not set
 # CONFIG_DEFAULT_HTCP is not set
@@ -324,26 +302,14 @@ CONFIG_DEFAULT_BIC=y
 # CONFIG_DEFAULT_WESTWOOD is not set
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="bic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -369,10 +335,20 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
@@ -381,31 +357,12 @@ CONFIG_FIB_RULES=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -420,19 +377,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -440,6 +387,7 @@ CONFIG_SGI_IOC4=m
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -461,6 +409,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -468,48 +417,8 @@ CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
@@ -532,6 +441,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -564,10 +474,6 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
 
 #
@@ -581,17 +487,16 @@ CONFIG_PATA_SIL680=y
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 CONFIG_IEEE1394=m
 
 #
 # Subsystem Options
 #
 # CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
 
 #
-# Device Drivers
+# Controllers
 #
 
 #
@@ -600,59 +505,63 @@ CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
 CONFIG_IEEE1394_OHCI1394=m
 
 #
-# Protocol Drivers
+# Protocols
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE_NAPI is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
@@ -664,35 +573,29 @@ CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
+CONFIG_VIA_VELOCITY=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -703,15 +606,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -719,11 +614,15 @@ CONFIG_NETXEN_NIC=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -735,6 +634,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -769,35 +669,18 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_TANBAC_TB0219 is not set
+# CONFIG_GPIO_TB0219 is not set
 # CONFIG_DRM is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -805,17 +688,9 @@ CONFIG_GPIO_VR41XX=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
 # Multifunction device drivers
@@ -826,23 +701,31 @@ CONFIG_MFD_SM501=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -850,7 +733,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TILEBLITTING is not set
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
@@ -871,8 +754,10 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 
@@ -881,27 +766,44 @@ CONFIG_FB_SM501=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -912,8 +814,8 @@ CONFIG_USB=m
 # Miscellaneous USB options
 #
 # CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -923,7 +825,6 @@ CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -931,6 +832,7 @@ CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -959,47 +861,10 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -1032,6 +897,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 
 #
 # USB DSL modem support
@@ -1041,37 +907,9 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1088,12 +926,9 @@ CONFIG_USB_MON=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1111,7 +946,7 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=y
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
@@ -1125,10 +960,11 @@ CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1151,10 +987,10 @@ CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1181,12 +1017,18 @@ CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1194,7 +1036,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1210,10 +1051,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -1231,7 +1069,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
@@ -1240,63 +1077,20 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index db6fd4f..b52256c 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,60 +1,47 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:42 2007
+# Linux kernel version: 2.6.23-rc2
+# Thu Aug  9 14:33:57 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+CONFIG_MACH_VR41XX=y
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 # CONFIG_CASIO_E55 is not set
 CONFIG_IBM_WORKPAD=y
 # CONFIG_NEC_CMBVR4133 is not set
@@ -72,6 +59,8 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -81,6 +70,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -102,7 +92,6 @@ CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_SB1 is not set
 CONFIG_SYS_HAS_CPU_VR41XX=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
@@ -118,7 +107,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -132,48 +120,47 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
 # CONFIG_HZ_1024 is not set
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
+CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -186,32 +173,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -229,6 +214,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -250,10 +236,6 @@ CONFIG_PCMCIA_PROBE=y
 CONFIG_PCMCIA_VRC4171=y
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -263,10 +245,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_PM is not set
 
 #
 # Networking
@@ -276,7 +255,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -301,34 +279,25 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -354,8 +323,17 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -368,31 +346,11 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
 # CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -400,17 +358,9 @@ CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
@@ -426,15 +376,16 @@ CONFIG_BLK_DEV_IDECS=m
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_IDE_ARM is not set
 # CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -442,135 +393,38 @@ CONFIG_IDE_GENERIC=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
+# CONFIG_NET_ETHERNET is not set
 CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
+# CONFIG_LIBERTAS is not set
 CONFIG_HERMES=m
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 CONFIG_PCMCIA_HERMES=m
 # CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -580,10 +434,6 @@ CONFIG_PCMCIA_NMCLAN=m
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 CONFIG_PCMCIA_AXNET=m
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -591,15 +441,7 @@ CONFIG_PCMCIA_AXNET=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -607,6 +449,7 @@ CONFIG_PCMCIA_AXNET=m
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -623,6 +466,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -656,19 +500,10 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -678,17 +513,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-# CONFIG_GPIO_VR41XX is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -696,32 +524,33 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -730,65 +559,51 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# LED drivers
-#
-
-#
-# LED Triggers
+# RTC interfaces
 #
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# InfiniBand support
+# SPI RTC drivers
 #
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Real Time Clock
+# on-CPU RTC drivers
 #
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_VR41XX=y
 
 #
 # DMA Engine support
@@ -804,23 +619,25 @@ CONFIG_HID=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -836,7 +653,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -863,7 +680,7 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -885,17 +702,22 @@ CONFIG_CONFIGFS_FS=m
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -903,7 +725,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -919,10 +740,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -940,7 +758,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
 
@@ -949,52 +766,7 @@ CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
@@ -1002,10 +774,11 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index d3d81fb..670039b 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:14 2007
+# Linux kernel version: 2.6.23-rc2
+# Tue Aug  7 12:39:49 2007
 #
 CONFIG_MIPS=y
 
@@ -9,52 +9,40 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
 CONFIG_SGI_IP22=y
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
 # CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -67,6 +55,9 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
@@ -82,6 +73,7 @@ CONFIG_ARC_PROMLIB=y
 #
 # CPU selection
 #
+# CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -122,8 +114,6 @@ CONFIG_IP22_CPU_SCACHE=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -139,6 +129,8 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -152,35 +144,33 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -193,32 +183,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -237,6 +225,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_EISA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_EISA is not set
 CONFIG_MMU=y
 
@@ -245,10 +234,6 @@ CONFIG_MMU=y
 #
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -261,7 +246,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+# CONFIG_SUSPEND is not set
 
 #
 # Networking
@@ -271,7 +256,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -308,10 +292,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
 CONFIG_IP_VS=m
 # CONFIG_IP_VS_DEBUG is not set
 CONFIG_IP_VS_TAB_BITS=12
@@ -346,10 +326,11 @@ CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
@@ -371,8 +352,6 @@ CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -380,6 +359,7 @@ CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
@@ -398,11 +378,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -423,6 +405,7 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -490,25 +473,13 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -527,9 +498,6 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -538,6 +506,7 @@ CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -562,10 +531,16 @@ CONFIG_NET_CLS_U32=m
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_CLS_POLICE=y
 # CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -574,14 +549,26 @@ CONFIG_NET_ESTIMATOR=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_IEEE80211_SOFTMAC=m
 # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=m
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -593,47 +580,19 @@ CONFIG_FIB_RULES=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
 # CONFIG_IDE is not set
 
 #
@@ -641,6 +600,7 @@ CONFIG_ATA_OVER_ETH=m
 #
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -663,6 +623,7 @@ CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -670,51 +631,21 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=m
 
 #
@@ -728,36 +659,25 @@ CONFIG_CICADA_PHY=m
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_DM9000 is not set
 CONFIG_SGISEEQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+CONFIG_WLAN_PRE80211=y
+CONFIG_STRIP=m
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -765,15 +685,7 @@ CONFIG_SGISEEQ=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -781,6 +693,7 @@ CONFIG_SGISEEQ=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -806,9 +719,16 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2_ALPS is not set
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_LIFEBOOK is not set
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -844,15 +764,7 @@ CONFIG_SERIAL_CORE=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -864,20 +776,10 @@ CONFIG_INDYDOG=m
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 CONFIG_SGI_DS1286=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -885,32 +787,33 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 
 #
@@ -920,31 +823,20 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_SGI_NEWPORT_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SGI_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -957,36 +849,8 @@ CONFIG_HID=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1003,12 +867,9 @@ CONFIG_HID=y
 #
 
 #
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1121,6 +982,7 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1136,7 +998,6 @@ CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1158,6 +1019,7 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
 
 #
 # Native Language Support
@@ -1207,8 +1069,6 @@ CONFIG_NLS_UTF8=m
 # Distributed Lock Manager
 #
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
@@ -1227,7 +1087,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
@@ -1237,12 +1096,9 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ABLKCIPHER=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
@@ -1261,6 +1117,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
@@ -1279,10 +1136,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
@@ -1290,7 +1144,9 @@ CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_BITREVERSE=m
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
@@ -1301,3 +1157,4 @@ CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index 1187b44..d9efe69 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -45,9 +45,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-#define irc_dlevel	0
-#define irc_elevel	1
-
 static unsigned char irc_level[TX3927_NUM_IR] = {
 	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
 	7, 7,			/* SIO */
@@ -80,34 +77,6 @@ static void unmask_irq_ioc(unsigned int irq)
 	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
 }
 
-static void mask_irq_irc(unsigned int irq)
-{
-	unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
-	volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
-	if (irq_nr & 1)
-		*ilrp = (*ilrp & 0x00ff) | (irc_dlevel << 8);
-	else
-		*ilrp = (*ilrp & 0xff00) | irc_dlevel;
-	/* update IRCSR */
-	tx3927_ircptr->imr = 0;
-	tx3927_ircptr->imr = irc_elevel;
-	/* flush write buffer */
-	(void)tx3927_ircptr->ssr;
-}
-
-static void unmask_irq_irc(unsigned int irq)
-{
-	unsigned int irq_nr = irq - JMR3927_IRQ_IRC;
-	volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2];
-	if (irq_nr & 1)
-		*ilrp = (*ilrp & 0x00ff) | (irc_level[irq_nr] << 8);
-	else
-		*ilrp = (*ilrp & 0xff00) | irc_level[irq_nr];
-	/* update IRCSR */
-	tx3927_ircptr->imr = 0;
-	tx3927_ircptr->imr = irc_elevel;
-}
-
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned long cp0_cause = read_c0_cause();
@@ -168,10 +137,6 @@ void __init arch_init_irq(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	/* enable interrupt control */
-	tx3927_ircptr->cer = TX3927_IRCER_ICE;
-	tx3927_ircptr->imr = irc_elevel;
-
 	jmr3927_irq_init();
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
@@ -193,20 +158,13 @@ static struct irq_chip jmr3927_irq_ioc = {
 	.unmask = unmask_irq_ioc,
 };
 
-static struct irq_chip jmr3927_irq_irc = {
-	.name = "jmr3927_irc",
-	.ack = mask_irq_irc,
-	.mask = mask_irq_irc,
-	.mask_ack = mask_irq_irc,
-	.unmask = unmask_irq_irc,
-};
-
 static void __init jmr3927_irq_init(void)
 {
 	u32 i;
 
-	for (i = JMR3927_IRQ_IRC; i < JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_irc, handle_level_irq);
+	txx9_irq_init(TX3927_IRC_REG);
+	for (i = 0; i < TXx9_MAX_IR; i++)
+		txx9_irq_set_pri(i, irc_level[i]);
 	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
 		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
index 8303001..fde56e8 100644
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ b/arch/mips/jmr3927/rbhma3100/setup.c
@@ -290,19 +290,6 @@ static void __init tx3927_setup(void)
 	       tx3927_ccfgptr->crir,
 	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
 
-	/* IRC */
-	/* disable interrupt control */
-	tx3927_ircptr->cer = 0;
-	/* mask all IRC interrupts */
-	tx3927_ircptr->imr = 0;
-	for (i = 0; i < TX3927_NUM_IR / 2; i++) {
-		tx3927_ircptr->ilr[i] = 0;
-	}
-	/* setup IRC interrupt mode (Low Active) */
-	for (i = 0; i < TX3927_NUM_IR / 8; i++) {
-		tx3927_ircptr->cr[i] = 0;
-	}
-
 	/* TMR */
 	/* disable all timers */
 	for (i = 0; i < TX3927_NR_TMR; i++) {
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 07344cb..2fd96d95 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
 obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
+obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 0133272..ca13629 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -232,6 +232,10 @@ void output_mm_defines(void)
 	constant("#define _PMD_T_LOG2    ", PMD_T_LOG2);
 	constant("#define _PTE_T_LOG2    ", PTE_T_LOG2);
 	linefeed;
+	constant("#define _PGD_ORDER     ", PGD_ORDER);
+	constant("#define _PMD_ORDER     ", PMD_ORDER);
+	constant("#define _PTE_ORDER     ", PTE_ORDER);
+	linefeed;
 	constant("#define _PMD_SHIFT     ", PMD_SHIFT);
 	constant("#define _PGDIR_SHIFT   ", PGDIR_SHIFT);
 	linefeed;
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index c09337b..ac04f0a 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -29,7 +29,7 @@ static inline void align_mod(const int align, const int mod)
 		".endr\n\t"
 		".set	pop"
 		:
-		: "n" (align), "n" (mod));
+		: "rn" (align), "rn" (mod));
 }
 
 static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
index 6980deb..28b2a8f 100644
--- a/arch/mips/kernel/irixsig.c
+++ b/arch/mips/kernel/irixsig.c
@@ -725,7 +725,7 @@ asmlinkage int irix_getcontext(struct pt_regs *regs)
 	       current->comm, current->pid, ctx);
 #endif
 
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)));
+	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
 		return -EFAULT;
 
 	error = __put_user(current->thread.irix_oldctx, &ctx->link);
diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c
new file mode 100644
index 0000000..a4d1462
--- /dev/null
+++ b/arch/mips/kernel/irq_txx9.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/mips/kernel/irq_txx9.c
+ *
+ * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c,
+ *          linux/arch/mips/tx4927/common/tx4927_irq.c,
+ *          linux/arch/mips/tx4938/common/irq.c
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         ahennessy@mvista.com
+ *         source@mvista.com
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <asm/txx9irq.h>
+
+struct txx9_irc_reg {
+	u32 cer;
+	u32 cr[2];
+	u32 unused0;
+	u32 ilr[8];
+	u32 unused1[4];
+	u32 imr;
+	u32 unused2[7];
+	u32 scr;
+	u32 unused3[7];
+	u32 ssr;
+	u32 unused4[7];
+	u32 csr;
+};
+
+/* IRCER : Int. Control Enable */
+#define TXx9_IRCER_ICE	0x00000001
+
+/* IRCR : Int. Control */
+#define TXx9_IRCR_LOW	0x00000000
+#define TXx9_IRCR_HIGH	0x00000001
+#define TXx9_IRCR_DOWN	0x00000002
+#define TXx9_IRCR_UP	0x00000003
+#define TXx9_IRCR_EDGE(cr)	((cr) & 0x00000002)
+
+/* IRSCR : Int. Status Control */
+#define TXx9_IRSCR_EIClrE	0x00000100
+#define TXx9_IRSCR_EIClr_MASK	0x0000000f
+
+/* IRCSR : Int. Current Status */
+#define TXx9_IRCSR_IF	0x00010000
+#define TXx9_IRCSR_ILV_MASK	0x00000700
+#define TXx9_IRCSR_IVL_MASK	0x0000001f
+
+#define irc_dlevel	0
+#define irc_elevel	1
+
+static struct txx9_irc_reg __iomem *txx9_ircptr __read_mostly;
+
+static struct {
+	unsigned char level;
+	unsigned char mode;
+} txx9irq[TXx9_MAX_IR] __read_mostly;
+
+static void txx9_irq_unmask(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16 ) / 2];
+	int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8;
+
+	__raw_writel((__raw_readl(ilrp) & ~(0xff << ofs))
+		     | (txx9irq[irq_nr].level << ofs),
+		     ilrp);
+#ifdef CONFIG_CPU_TX39XX
+	/* update IRCSR */
+	__raw_writel(0, &txx9_ircptr->imr);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+#endif
+}
+
+static inline void txx9_irq_mask(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16) / 2];
+	int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8;
+
+	__raw_writel((__raw_readl(ilrp) & ~(0xff << ofs))
+		     | (irc_dlevel << ofs),
+		     ilrp);
+#ifdef CONFIG_CPU_TX39XX
+	/* update IRCSR */
+	__raw_writel(0, &txx9_ircptr->imr);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+	/* flush write buffer */
+	__raw_readl(&txx9_ircptr->ssr);
+#else
+	mmiowb();
+#endif
+}
+
+static void txx9_irq_mask_ack(unsigned int irq)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+
+	txx9_irq_mask(irq);
+	/* clear edge detection */
+	if (unlikely(TXx9_IRCR_EDGE(txx9irq[irq_nr].mode)))
+		__raw_writel(TXx9_IRSCR_EIClrE | irq_nr, &txx9_ircptr->scr);
+}
+
+static int txx9_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned int irq_nr = irq - TXX9_IRQ_BASE;
+	u32 cr;
+	u32 __iomem *crp;
+	int ofs;
+	int mode;
+
+	if (flow_type & IRQF_TRIGGER_PROBE)
+		return 0;
+	switch (flow_type & IRQF_TRIGGER_MASK) {
+	case IRQF_TRIGGER_RISING:	mode = TXx9_IRCR_UP;	break;
+	case IRQF_TRIGGER_FALLING:	mode = TXx9_IRCR_DOWN;	break;
+	case IRQF_TRIGGER_HIGH:	mode = TXx9_IRCR_HIGH;	break;
+	case IRQF_TRIGGER_LOW:	mode = TXx9_IRCR_LOW;	break;
+	default:
+		return -EINVAL;
+	}
+	crp = &txx9_ircptr->cr[(unsigned int)irq_nr / 8];
+	cr = __raw_readl(crp);
+	ofs = (irq_nr & (8 - 1)) * 2;
+	cr &= ~(0x3 << ofs);
+	cr |= (mode & 0x3) << ofs;
+	__raw_writel(cr, crp);
+	txx9irq[irq_nr].mode = mode;
+	return 0;
+}
+
+static struct irq_chip txx9_irq_chip = {
+	.name		= "TXX9",
+	.ack		= txx9_irq_mask_ack,
+	.mask		= txx9_irq_mask,
+	.mask_ack	= txx9_irq_mask_ack,
+	.unmask		= txx9_irq_unmask,
+	.set_type	= txx9_irq_set_type,
+};
+
+void __init txx9_irq_init(unsigned long baseaddr)
+{
+	int i;
+
+	txx9_ircptr = ioremap(baseaddr, sizeof(struct txx9_irc_reg));
+	for (i = 0; i < TXx9_MAX_IR; i++) {
+		txx9irq[i].level = 4; /* middle level */
+		txx9irq[i].mode = TXx9_IRCR_LOW;
+		set_irq_chip_and_handler(TXX9_IRQ_BASE + i,
+					 &txx9_irq_chip, handle_level_irq);
+	}
+
+	/* mask all IRC interrupts */
+	__raw_writel(0, &txx9_ircptr->imr);
+	for (i = 0; i < 8; i++)
+		__raw_writel(0, &txx9_ircptr->ilr[i]);
+	/* setup IRC interrupt mode (Low Active) */
+	for (i = 0; i < 2; i++)
+		__raw_writel(0, &txx9_ircptr->cr[i]);
+	/* enable interrupt control */
+	__raw_writel(TXx9_IRCER_ICE, &txx9_ircptr->cer);
+	__raw_writel(irc_elevel, &txx9_ircptr->imr);
+}
+
+int __init txx9_irq_set_pri(int irc_irq, int new_pri)
+{
+	int old_pri;
+
+	if ((unsigned int)irc_irq >= TXx9_MAX_IR)
+		return 0;
+	old_pri = txx9irq[irc_irq].level;
+	txx9irq[irc_irq].level = new_pri;
+	return old_pri;
+}
+
+int txx9_irq(void)
+{
+	u32 csr = __raw_readl(&txx9_ircptr->csr);
+
+	if (likely(!(csr & TXx9_IRCSR_IF)))
+		return TXX9_IRQ_BASE + (csr & (TXx9_MAX_IR - 1));
+	return -1;
+}
diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c
index 22960d6..85beb9b 100644
--- a/arch/mips/kernel/machine_kexec.c
+++ b/arch/mips/kernel/machine_kexec.c
@@ -78,11 +78,8 @@ machine_kexec(struct kimage *image)
 	 */
 	local_irq_disable();
 
-	flush_icache_range(reboot_code_buffer,
-			   reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
-
 	printk("Will call new kernel at %08lx\n", image->start);
 	printk("Bye ...\n");
-	flush_cache_all();
+	__flush_cache_all();
 	((noretfun_t) reboot_code_buffer)();
 }
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 7169a4d..56750b0 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -84,8 +85,9 @@ void mips_mt_regdump(unsigned long mvpctl)
 				       read_vpe_c0_vpeconf0());
 				printk("   VPE%d.Status : %08lx\n",
 				       i, read_vpe_c0_status());
-				printk("   VPE%d.EPC : %08lx\n",
+				printk("   VPE%d.EPC : %08lx ",
 				       i, read_vpe_c0_epc());
+				print_symbol("%s\n", read_vpe_c0_epc());
 				printk("   VPE%d.Cause : %08lx\n",
 				       i, read_vpe_c0_cause());
 				printk("   VPE%d.Config7 : %08lx\n",
@@ -110,7 +112,8 @@ void mips_mt_regdump(unsigned long mvpctl)
 		}
 		printk("   TCStatus : %08lx\n", tcstatval);
 		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
-		printk("   TCRestart : %08lx\n", read_tc_c0_tcrestart());
+		printk("   TCRestart : %08lx ", read_tc_c0_tcrestart());
+		print_symbol("%s\n", read_tc_c0_tcrestart());
 		printk("   TCHalt : %08lx\n", haltval);
 		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
 		if (!haltval)
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 19b30d6..05dcce4 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -287,7 +287,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * (unsigned long)idle->thread_info the gp
  * assumes a 1:1 mapping of TC => VPE
  */
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	struct thread_info *gp = task_thread_info(idle);
 	dvpe();
@@ -321,7 +321,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 	evpe(EVPE_ENABLE);
 }
 
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
 	/* Enable per-cpu interrupts */
 
@@ -330,7 +330,7 @@ void prom_init_secondary(void)
 	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
 }
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 16aa5d3..43826c1 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -28,8 +28,6 @@
  * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
  */
 
-#define MIPS_CPU_IPI_IRQ	1
-
 #define LOCK_MT_PRA() \
 	local_irq_save(flags); \
 	mtflags = dmt()
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index c8e291c..6379003 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -606,6 +606,8 @@ asmlinkage void do_ov(struct pt_regs *regs)
  */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
+	siginfo_t info;
+
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -641,9 +643,22 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 			force_sig(sig, current);
 
 		return;
-	}
-
-	force_sig(SIGFPE, current);
+	} else if (fcr31 & FPU_CSR_INV_X)
+		info.si_code = FPE_FLTINV;
+	else if (fcr31 & FPU_CSR_DIV_X)
+		info.si_code = FPE_FLTDIV;
+	else if (fcr31 & FPU_CSR_OVF_X)
+		info.si_code = FPE_FLTOVF;
+	else if (fcr31 & FPU_CSR_UDF_X)
+		info.si_code = FPE_FLTUND;
+	else if (fcr31 & FPU_CSR_INE_X)
+		info.si_code = FPE_FLTRES;
+	else
+		info.si_code = __SI_FAULT;
+	info.si_signo = SIGFPE;
+	info.si_errno = 0;
+	info.si_addr = (void __user *) regs->cp0_epc;
+	force_sig_info(SIGFPE, &info, current);
 }
 
 asmlinkage void do_bp(struct pt_regs *regs)
@@ -1035,19 +1050,11 @@ void ejtag_exception_handler(struct pt_regs *regs)
 /*
  * NMI exception handler.
  */
-void nmi_exception_handler(struct pt_regs *regs)
+NORET_TYPE void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long dvpret = dvpe();
-	bust_spinlocks(1);
-	printk("NMI taken!!!!\n");
-	mips_mt_regdump(dvpret);
-#else
 	bust_spinlocks(1);
 	printk("NMI taken!!!!\n");
-#endif /* CONFIG_MIPS_MT_SMTC */
 	die("NMI", regs);
-	while(1) ;
 }
 
 #define VECTORSPACING 0x100	/* for EI/VI mode */
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index bc9bae2..60bbaec 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -142,15 +142,16 @@ SECTIONS
         *(.exitcall.exit)
 
 	/* ABI crap starts here */
-	*(.comment)
 	*(.MIPS.options)
-	*(.note)
 	*(.options)
 	*(.pdr)
 	*(.reginfo)
-	*(.mdebug*)
   }
 
+  /* These mark the ABI of the kernel for debuggers.  */
+  .mdebug.abi32 : { KEEP(*(.mdebug.abi32)) }
+  .mdebug.abi64 : { KEEP(*(.mdebug.abi64)) }
+
   /* This is the MIPS specific mdebug section.  */
   .mdebug : { *(.mdebug) }
 
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 91ed1eb..8810dfb 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -28,4 +28,4 @@ obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
-obj-y += ashldi3.o ashrdi3.o lshrdi3.o ucmpdi2.o
+obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/lib/cmpdi2.c b/arch/mips/lib/cmpdi2.c
new file mode 100644
index 0000000..8c13064
--- /dev/null
+++ b/arch/mips/lib/cmpdi2.c
@@ -0,0 +1,27 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c
index 0fb4c26..ae05d05 100644
--- a/arch/mips/mips-boards/malta/malta_smtc.c
+++ b/arch/mips/mips-boards/malta/malta_smtc.c
@@ -1,6 +1,7 @@
 /*
  * Malta Platform-specific hooks for SMP operation
  */
+#include <linux/irq.h>
 #include <linux/init.h>
 
 #include <asm/mipsregs.h>
@@ -24,7 +25,7 @@ void core_send_ipi(int cpu, unsigned int action)
  * Platform "CPU" startup hook
  */
 
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	smtc_boot_secondary(cpu, idle);
 }
@@ -33,7 +34,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
  * Post-config but pre-boot cleanup entry point
  */
 
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
         void smtc_init_secondary(void);
 	int myvpe;
@@ -42,10 +43,11 @@ void prom_init_secondary(void)
 	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
 	if (myvpe != 0) {
 		/* Ideally, this should be done only once per VPE, but... */
-		clear_c0_status(STATUSF_IP2);
-		set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3
-				| STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6
-				| STATUSF_IP7);
+		clear_c0_status(ST0_IM);
+		set_c0_status((0x100 << cp0_compare_irq)
+				| (0x100 << MIPS_CPU_IPI_IRQ));
+		if (cp0_perfcount_irq >= 0)
+			set_c0_status(0x100 << cp0_perfcount_irq);
 	}
 
         smtc_init_secondary();
@@ -74,7 +76,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * SMP initialization finalization entry point
  */
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 	smtc_smp_finish();
 }
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
deleted file mode 100644
index 766e015..0000000
--- a/arch/mips/mips-boards/sim/sim_int.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) 1999, 2005 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <asm/mips-boards/simint.h>
-#include <asm/irq_cpu.h>
-
-static inline int clz(unsigned long x)
-{
-	__asm__ (
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq > 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
diff --git a/arch/mips/mipssim/sim_smp.c b/arch/mips/mipssim/sim_smp.c
index 38fa807..ccbbcca 100644
--- a/arch/mips/mipssim/sim_smp.c
+++ b/arch/mips/mipssim/sim_smp.c
@@ -53,7 +53,7 @@ void core_send_ipi(int cpu, unsigned int action)
  * Platform "CPU" startup hook
  */
 
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	smtc_boot_secondary(cpu, idle);
@@ -64,7 +64,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
  * Post-config but pre-boot cleanup entry point
  */
 
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	void smtc_init_secondary(void);
@@ -103,7 +103,7 @@ void plat_prepare_cpus(unsigned int max_cpus)
  * SMP initialization finalization entry point
  */
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
 	smtc_smp_finish();
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index b8cb0dd..09d9150 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -26,6 +26,7 @@
 #include <linux/proc_fs.h>
 #include <linux/pfn.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/bootinfo.h>
 #include <asm/cachectl.h>
 #include <asm/cpu.h>
@@ -498,7 +499,13 @@ unsigned long pgd_current[NR_CPUS];
  * different layout ...
  */
 #define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE<<order)))
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
+
+/*
+ * gcc 3.3 and older have trouble determining that PTRS_PER_PGD and PGD_ORDER
+ * are constants.  So we use the variants from asm-offset.h until that gcc
+ * will officially be retired.
+ */
+pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER);
 #ifdef CONFIG_64BIT
 #ifdef MODULE_START
 pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 99d8f4f..6c5c684 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -75,7 +75,7 @@ pcibios_align_resource(void *data, struct resource *res,
 	res->start = start;
 }
 
-void __init register_pci_controller(struct pci_controller *hose)
+void __devinit register_pci_controller(struct pci_controller *hose)
 {
 	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
 		goto out;
@@ -230,7 +230,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	return pcibios_plat_dev_init(dev);
 }
 
-static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
+static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	struct pci_bus *bus)
 {
 	/* Update device resources.  */
@@ -251,7 +251,7 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev,
 	}
 }
 
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
@@ -282,8 +282,7 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {
 	struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
diff --git a/arch/mips/philips/pnx8550/common/Kconfig b/arch/mips/philips/pnx8550/common/Kconfig
deleted file mode 100644
index 072572d..0000000
--- a/arch/mips/philips/pnx8550/common/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-# Place holder
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 1c852d6..b0f12cd 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -77,7 +77,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * stack so the first thing we do is throw away that stuff and load useful
  * values into the registers ...
  */
-void __init prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	unsigned long gp = (unsigned long) task_thread_info(idle);
 	unsigned long sp = __KSTK_TOS(idle);
@@ -97,12 +97,12 @@ void prom_cpus_done(void)
  *  After we've done initial boot, this function is called to allow the
  *  board code to clean up state, if needed
  */
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
 	set_c0_status(ST0_CO | ST0_IE | ST0_IM);
 }
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 }
 
diff --git a/arch/mips/qemu/q-smp.c b/arch/mips/qemu/q-smp.c
index 786bbfa..4b0178d 100644
--- a/arch/mips/qemu/q-smp.c
+++ b/arch/mips/qemu/q-smp.c
@@ -22,11 +22,11 @@ void core_send_ipi(int cpu, unsigned int action)
  *  After we've done initial boot, this function is called to allow the
  *  board code to clean up state, if needed
  */
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
 }
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 }
 
@@ -43,7 +43,7 @@ void __init prom_prepare_cpus(unsigned int max_cpus)
 /*
  * Firmware CPU startup hook
  */
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 }
 
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index ddb6506..01a805d 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -47,7 +47,7 @@ struct mem {
 /*
  * Detect installed memory, do some sanity checks and notify kernel about it
  */
-static void probe_memory(void)
+static void __init probe_memory(void)
 {
 	int i, j, found, cnt = 0;
 	struct mem bank[4];
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 25097ec..e7ce798 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -29,6 +29,7 @@
 #include <asm/sgi/ip22.h>
 
 unsigned long sgi_gfxaddr;
+EXPORT_SYMBOL_GPL(sgi_gfxaddr);
 
 /*
  * Stop-A is originally a Sun thing that isn't standard on IP22 so to avoid
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index ba8e079..856649c 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -207,11 +207,9 @@ static int intr_connect_level(int cpu, int bit)
 {
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
 	struct slice_data *si = cpu_data[cpu].data;
-	unsigned long flags;
 
 	set_bit(bit, si->irq_enable_mask);
 
-	local_irq_save(flags);
 	if (!cputoslice(cpu)) {
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
@@ -219,7 +217,6 @@ static int intr_connect_level(int cpu, int bit)
 		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
 		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
 	}
-	local_irq_restore(flags);
 
 	return 0;
 }
@@ -285,6 +282,8 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 
         bridge->b_wid_tflush;
 
+	intr_connect_level(cpu, swlevel);
+
         return 0;       /* Never anything pending.  */
 }
 
@@ -292,7 +291,6 @@ static unsigned int startup_bridge_irq(unsigned int irq)
 static void shutdown_bridge_irq(unsigned int irq)
 {
 	struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
-	struct hub_data *hub = hub_data(cpu_to_node(bc->irq_cpu));
 	bridge_t *bridge = bc->base;
 	int pin, swlevel;
 	cpuid_t cpu;
@@ -307,8 +305,6 @@ static void shutdown_bridge_irq(unsigned int irq)
 	swlevel = find_level(&cpu, irq);
 	intr_disconnect_level(cpu, swlevel);
 
-	__clear_bit(swlevel, hub->irq_alloc_mask);
-
 	bridge->b_int_enable &= ~(1 << pin);
 	bridge->b_wid_tflush;
 }
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 08e7914..fbb2772 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -171,7 +171,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * set sp to the kernel stack of the newly created idle process, gp to the proc
  * struct so that current_thread_info() will work.
  */
-void __init prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	unsigned long gp = (unsigned long)task_thread_info(idle);
 	unsigned long sp = __KSTK_TOS(idle);
@@ -191,7 +191,7 @@ void __init prom_cpus_done(void)
 {
 }
 
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 }
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ba0c4b7..79ae6ef 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -76,7 +76,7 @@ __setup("nokgdb", nokgdb);
 
 /* Default to UART1 */
 int kgdb_port = 1;
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SERIAL_SB1250_DUART
 extern char sb1250_duart_present[];
 #endif
 #endif
@@ -404,7 +404,7 @@ void __init arch_init_irq(void)
 	if (kgdb_flag) {
 		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
 
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SERIAL_SB1250_DUART
 		sb1250_duart_present[kgdb_port] = 0;
 #endif
 		/* Setup uart 1 settings, mapper */
diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c
index c6ec748..4cec9d7 100644
--- a/arch/mips/sibyte/cfe/console.c
+++ b/arch/mips/sibyte/cfe/console.c
@@ -46,7 +46,7 @@ static int cfe_console_setup(struct console *cons, char *str)
 	/* XXXKW think about interaction with 'console=' cmdline arg */
 	/* If none of the console options are configured, the build will break. */
 	if (cfe_getenv("BOOT_CONSOLE", consdev, 32) >= 0) {
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SERIAL_SB1250_DUART
 		if (!strcmp(consdev, "uart0")) {
 			setleds("u0cn");
 		} else if (!strcmp(consdev, "uart1")) {
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index eab20e2..5de4cff 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -58,7 +58,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * Setup the PC, SP, and GP of a secondary processor and start it
  * running!
  */
-void prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 	int retval;
 
@@ -72,7 +72,7 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 /*
  * Code to run on secondary just after probing the CPU
  */
-void prom_init_secondary(void)
+void __cpuinit prom_init_secondary(void)
 {
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
 	extern void bcm1480_smp_init(void);
@@ -89,7 +89,7 @@ void prom_init_secondary(void)
  * Do any tidying up before marking online and running the idle
  * loop
  */
-void prom_smp_finish(void)
+void __cpuinit prom_smp_finish(void)
 {
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
 	extern void bcm1480_smp_finish(void);
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 0e6a13c..ad593a6 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -61,7 +61,7 @@ static int kgdb_irq;
 
 /* Default to UART1 */
 int kgdb_port = 1;
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SERIAL_SB1250_DUART
 extern char sb1250_duart_present[];
 #endif
 #endif
@@ -359,7 +359,7 @@ void __init arch_init_irq(void)
 	if (kgdb_flag) {
 		kgdb_irq = K_INT_UART_0 + kgdb_port;
 
-#ifdef CONFIG_SIBYTE_SB1250_DUART
+#ifdef CONFIG_SERIAL_SB1250_DUART
 		sb1250_duart_present[kgdb_port] = 0;
 #endif
 		/* Setup uart 1 settings, mapper */
diff --git a/arch/mips/sni/pcimt_scache.c b/arch/mips/sni/pcimt_scache.c
deleted file mode 100644
index a59d457..0000000
--- a/arch/mips/sni/pcimt_scache.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/mips/sni/pcimt_scache.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1997, 1998 by Ralf Baechle
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/bcache.h>
-#include <asm/sni.h>
-
-#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
-#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
-
-void __init sni_pcimt_sc_init(void)
-{
-	unsigned int scsiz, sc_size;
-
-	scsiz = cacheconf & 7;
-	if (scsiz == 0) {
-		printk("Second level cache is deactived.\n");
-		return;
-	}
-	if (scsiz >= 6) {
-		printk("Invalid second level cache size configured, "
-		       "deactivating second level cache.\n");
-		cacheconf = 0;
-		return;
-	}
-
-	sc_size = 128 << scsiz;
-	printk("%dkb second level cache detected, deactivating.\n", sc_size);
-	cacheconf = 0;
-}
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index 2eada8a..38b6a97 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -40,10 +40,6 @@ void sni_machine_restart(char *command)
 	}
 }
 
-void sni_machine_halt(void)
-{
-}
-
 void sni_machine_power_off(void)
 {
 	*(volatile unsigned char *)PCIMT_CSWCSM = 0xfd;
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 4fedfbd..6edbb30 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -26,7 +26,6 @@
 unsigned int sni_brd_type;
 
 extern void sni_machine_restart(char *command);
-extern void sni_machine_halt(void);
 extern void sni_machine_power_off(void);
 
 static void __init sni_display_setup(void)
@@ -87,7 +86,6 @@ void __init plat_mem_setup(void)
 	}
 
 	_machine_restart = sni_machine_restart;
-	_machine_halt = sni_machine_halt;
 	pm_power_off = sni_machine_power_off;
 
 	sni_display_setup();
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile
index 9cb9535..1837578 100644
--- a/arch/mips/tx4927/common/Makefile
+++ b/arch/mips/tx4927/common/Makefile
@@ -10,3 +10,5 @@ obj-y	+= tx4927_prom.o tx4927_setup.o tx4927_irq.o
 
 obj-$(CONFIG_TOSHIBA_FPCIB0)	   += smsc_fdc37m81x.o
 obj-$(CONFIG_KGDB)                 += tx4927_dbgio.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c
index 00b0b97..0aabd57 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/tx4927/common/tx4927_irq.c
@@ -23,398 +23,20 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
 #include <asm/tx4927/tx4927.h>
 #ifdef CONFIG_TOSHIBA_RBTX4927
 #include <asm/tx4927/toshiba_rbtx4927.h>
 #endif
 
-/*
- * DEBUG
- */
-
-#undef TX4927_IRQ_DEBUG
-
-#ifdef TX4927_IRQ_DEBUG
-#define TX4927_IRQ_NONE        0x00000000
-
-#define TX4927_IRQ_INFO        ( 1 <<  0 )
-#define TX4927_IRQ_WARN        ( 1 <<  1 )
-#define TX4927_IRQ_EROR        ( 1 <<  2 )
-
-#define TX4927_IRQ_INIT        ( 1 <<  5 )
-#define TX4927_IRQ_NEST1       ( 1 <<  6 )
-#define TX4927_IRQ_NEST2       ( 1 <<  7 )
-#define TX4927_IRQ_NEST3       ( 1 <<  8 )
-#define TX4927_IRQ_NEST4       ( 1 <<  9 )
-
-#define TX4927_IRQ_CP0_INIT     ( 1 << 10 )
-#define TX4927_IRQ_CP0_ENABLE   ( 1 << 13 )
-#define TX4927_IRQ_CP0_DISABLE  ( 1 << 14 )
-
-#define TX4927_IRQ_PIC_INIT     ( 1 << 20 )
-#define TX4927_IRQ_PIC_ENABLE   ( 1 << 23 )
-#define TX4927_IRQ_PIC_DISABLE  ( 1 << 24 )
-
-#define TX4927_IRQ_ALL         0xffffffff
-#endif
-
-#ifdef TX4927_IRQ_DEBUG
-static const u32 tx4927_irq_debug_flag = (TX4927_IRQ_NONE
-					  | TX4927_IRQ_INFO
-					  | TX4927_IRQ_WARN | TX4927_IRQ_EROR
-//                                       | TX4927_IRQ_CP0_INIT
-//                                       | TX4927_IRQ_CP0_ENABLE
-//                                       | TX4927_IRQ_CP0_ENDIRQ
-//                                       | TX4927_IRQ_PIC_INIT
-//                                       | TX4927_IRQ_PIC_ENABLE
-//                                       | TX4927_IRQ_PIC_DISABLE
-//                                       | TX4927_IRQ_INIT
-//                                       | TX4927_IRQ_NEST1
-//                                       | TX4927_IRQ_NEST2
-//                                       | TX4927_IRQ_NEST3
-//                                       | TX4927_IRQ_NEST4
-    );
-#endif
-
-#ifdef TX4927_IRQ_DEBUG
-#define TX4927_IRQ_DPRINTK(flag,str...) \
-        if ( (tx4927_irq_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __FUNCTION__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TX4927_IRQ_DPRINTK(flag,str...)
-#endif
-
-/*
- * Forwad definitions for all pic's
- */
-
-static void tx4927_irq_cp0_enable(unsigned int irq);
-static void tx4927_irq_cp0_disable(unsigned int irq);
-
-static void tx4927_irq_pic_enable(unsigned int irq);
-static void tx4927_irq_pic_disable(unsigned int irq);
-
-/*
- * Kernel structs for all pic's
- */
-
-#define TX4927_CP0_NAME "TX4927-CP0"
-static struct irq_chip tx4927_irq_cp0_type = {
-	.name		= TX4927_CP0_NAME,
-	.ack		= tx4927_irq_cp0_disable,
-	.mask		= tx4927_irq_cp0_disable,
-	.mask_ack	= tx4927_irq_cp0_disable,
-	.unmask		= tx4927_irq_cp0_enable,
-};
-
-#define TX4927_PIC_NAME "TX4927-PIC"
-static struct irq_chip tx4927_irq_pic_type = {
-	.name		= TX4927_PIC_NAME,
-	.ack		= tx4927_irq_pic_disable,
-	.mask		= tx4927_irq_pic_disable,
-	.mask_ack	= tx4927_irq_pic_disable,
-	.unmask		= tx4927_irq_pic_enable,
-};
-
-#define TX4927_PIC_ACTION(s) { no_action, 0, CPU_MASK_NONE, s, NULL, NULL }
-static struct irqaction tx4927_irq_pic_action =
-TX4927_PIC_ACTION(TX4927_PIC_NAME);
-
-#define CCP0_STATUS 12
-#define CCP0_CAUSE 13
-
-/*
- * Functions for cp0
- */
-
-#define tx4927_irq_cp0_mask(irq) ( 1 << ( irq-TX4927_IRQ_CP0_BEG+8 ) )
-
-static void
-tx4927_irq_cp0_modify(unsigned cp0_reg, unsigned clr_bits, unsigned set_bits)
-{
-	unsigned long val = 0;
-
-	switch (cp0_reg) {
-	case CCP0_STATUS:
-		val = read_c0_status();
-		break;
-
-	case CCP0_CAUSE:
-		val = read_c0_cause();
-		break;
-
-	}
-
-	val &= (~clr_bits);
-	val |= (set_bits);
-
-	switch (cp0_reg) {
-	case CCP0_STATUS:{
-			write_c0_status(val);
-			break;
-		}
-	case CCP0_CAUSE:{
-			write_c0_cause(val);
-			break;
-		}
-	}
-}
-
-static void __init tx4927_irq_cp0_init(void)
-{
-	int i;
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_INIT, "beg=%d end=%d\n",
-			   TX4927_IRQ_CP0_BEG, TX4927_IRQ_CP0_END);
-
-	for (i = TX4927_IRQ_CP0_BEG; i <= TX4927_IRQ_CP0_END; i++)
-		set_irq_chip_and_handler(i, &tx4927_irq_cp0_type,
-					 handle_level_irq);
-}
-
-static void tx4927_irq_cp0_enable(unsigned int irq)
-{
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_ENABLE, "irq=%d \n", irq);
-
-	tx4927_irq_cp0_modify(CCP0_STATUS, 0, tx4927_irq_cp0_mask(irq));
-}
-
-static void tx4927_irq_cp0_disable(unsigned int irq)
-{
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_CP0_DISABLE, "irq=%d \n", irq);
-
-	tx4927_irq_cp0_modify(CCP0_STATUS, tx4927_irq_cp0_mask(irq), 0);
-}
-
-/*
- * Functions for pic
- */
-u32 tx4927_irq_pic_addr(int irq)
-{
-	/* MVMCP -- need to formulize this */
-	irq -= TX4927_IRQ_PIC_BEG;
-	switch (irq) {
-	case 17:
-	case 16:
-	case 1:
-	case 0:
-		return (0xff1ff610);
-
-	case 19:
-	case 18:
-	case 3:
-	case 2:
-		return (0xff1ff614);
-
-	case 21:
-	case 20:
-	case 5:
-	case 4:
-		return (0xff1ff618);
-
-	case 23:
-	case 22:
-	case 7:
-	case 6:
-		return (0xff1ff61c);
-
-	case 25:
-	case 24:
-	case 9:
-	case 8:
-		return (0xff1ff620);
-
-	case 27:
-	case 26:
-	case 11:
-	case 10:
-		return (0xff1ff624);
-
-	case 29:
-	case 28:
-	case 13:
-	case 12:
-		return (0xff1ff628);
-
-	case 31:
-	case 30:
-	case 15:
-	case 14:
-		return (0xff1ff62c);
-
-	}
-	return (0);
-}
-
-u32 tx4927_irq_pic_mask(int irq)
-{
-	/* MVMCP -- need to formulize this */
-	irq -= TX4927_IRQ_PIC_BEG;
-	switch (irq) {
-	case 31:
-	case 29:
-	case 27:
-	case 25:
-	case 23:
-	case 21:
-	case 19:
-	case 17:{
-			return (0x07000000);
-		}
-	case 30:
-	case 28:
-	case 26:
-	case 24:
-	case 22:
-	case 20:
-	case 18:
-	case 16:{
-			return (0x00070000);
-		}
-	case 15:
-	case 13:
-	case 11:
-	case 9:
-	case 7:
-	case 5:
-	case 3:
-	case 1:{
-			return (0x00000700);
-		}
-	case 14:
-	case 12:
-	case 10:
-	case 8:
-	case 6:
-	case 4:
-	case 2:
-	case 0:{
-			return (0x00000007);
-		}
-	}
-	return (0x00000000);
-}
-
-static void tx4927_irq_pic_modify(unsigned pic_reg, unsigned clr_bits,
-	unsigned set_bits)
-{
-	unsigned long val = 0;
-
-	val = TX4927_RD(pic_reg);
-	val &= (~clr_bits);
-	val |= (set_bits);
-	TX4927_WR(pic_reg, val);
-}
-
-static void __init tx4927_irq_pic_init(void)
-{
-	int i;
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_INIT, "beg=%d end=%d\n",
-			   TX4927_IRQ_PIC_BEG, TX4927_IRQ_PIC_END);
-
-	for (i = TX4927_IRQ_PIC_BEG; i <= TX4927_IRQ_PIC_END; i++)
-		set_irq_chip_and_handler(i, &tx4927_irq_pic_type,
-					 handle_level_irq);
-
-	setup_irq(TX4927_IRQ_NEST_PIC_ON_CP0, &tx4927_irq_pic_action);
-
-	TX4927_WR(0xff1ff640, 0x6);	/* irq level mask -- only accept hightest */
-	TX4927_WR(0xff1ff600, TX4927_RD(0xff1ff600) | 0x1);	/* irq enable */
-}
-
-static void tx4927_irq_pic_enable(unsigned int irq)
-{
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_ENABLE, "irq=%d\n", irq);
-
-	tx4927_irq_pic_modify(tx4927_irq_pic_addr(irq), 0,
-			      tx4927_irq_pic_mask(irq));
-}
-
-static void tx4927_irq_pic_disable(unsigned int irq)
-{
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_PIC_DISABLE, "irq=%d\n", irq);
-
-	tx4927_irq_pic_modify(tx4927_irq_pic_addr(irq),
-			      tx4927_irq_pic_mask(irq), 0);
-}
-
-/*
- * Main init functions
- */
 void __init tx4927_irq_init(void)
 {
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n");
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n");
-	tx4927_irq_cp0_init();
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n");
-	tx4927_irq_pic_init();
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n");
-}
-
-static int tx4927_irq_nested(void)
-{
-	int sw_irq = 0;
-	u32 level2;
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST1, "-\n");
-
-	level2 = TX4927_RD(0xff1ff6a0);
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST2, "=level2a=0x%x\n", level2);
-
-	if ((level2 & 0x10000) == 0) {
-		level2 &= 0x1f;
-		TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST3, "=level2b=0x%x\n", level2);
-
-		sw_irq = TX4927_IRQ_PIC_BEG + level2;
-		TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST3, "=sw_irq=%d\n", sw_irq);
-
-		if (sw_irq == 27) {
-			TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST4, "=irq-%d\n",
-					   sw_irq);
-
-#ifdef CONFIG_TOSHIBA_RBTX4927
-			{
-				sw_irq = toshiba_rbtx4927_irq_nested(sw_irq);
-			}
-#endif
-
-			TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST4, "=irq+%d\n",
-					   sw_irq);
-		}
-	}
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST2, "=sw_irq=%d\n", sw_irq);
-
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_NEST1, "+\n");
-
-	return (sw_irq);
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4927_IRC_REG);
+	set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -424,9 +46,12 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & STATUSF_IP7)			/* cpu timer */
 		do_IRQ(TX4927_IRQ_CPU_TIMER);
 	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
-		unsigned int irq = tx4927_irq_nested();
-
-		if (unlikely(irq == 0)) {
+		int irq = txx9_irq();
+#ifdef CONFIG_TOSHIBA_RBTX4927
+		if (irq == TX4927_IRQ_NEST_EXT_ON_PIC)
+			irq = toshiba_rbtx4927_irq_nested(irq);
+#endif
+		if (unlikely(irq < 0)) {
 			spurious_interrupt();
 			return;
 		}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
index 8a991f3..13f9672 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
@@ -1,3 +1,5 @@
 obj-y	+= toshiba_rbtx4927_prom.o
 obj-y	+= toshiba_rbtx4927_setup.o
 obj-y	+= toshiba_rbtx4927_irq.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
index e265fcd..9607ad5 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
@@ -133,6 +133,7 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
 #include <linux/bootmem.h>
 #include <linux/blkdev.h>
 #ifdef CONFIG_TOSHIBA_FPCIB0
+#include <asm/i8259.h>
 #include <asm/tx4927/smsc_fdc37m81x.h>
 #endif
 #include <asm/tx4927/toshiba_rbtx4927.h>
@@ -151,11 +152,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB
 #define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE    ( 1 << 13 )
 #define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE   ( 1 << 14 )
 
-#define TOSHIBA_RBTX4927_IRQ_ISA_INIT      ( 1 << 20 )
-#define TOSHIBA_RBTX4927_IRQ_ISA_ENABLE    ( 1 << 23 )
-#define TOSHIBA_RBTX4927_IRQ_ISA_DISABLE   ( 1 << 24 )
-#define TOSHIBA_RBTX4927_IRQ_ISA_MASK      ( 1 << 25 )
-
 #define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
 #endif
 
@@ -167,10 +163,6 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
 //                                                 | TOSHIBA_RBTX4927_IRQ_IOC_INIT
 //                                                 | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
 //                                                 | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_ISA_INIT
-//                                                 | TOSHIBA_RBTX4927_IRQ_ISA_ENABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_ISA_DISABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_ISA_MASK
     );
 #endif
 
@@ -196,33 +188,14 @@ static const u32 toshiba_rbtx4927_irq_debug_flag =
 #define TOSHIBA_RBTX4927_IRQ_IOC_BEG  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG)	/* 56 */
 #define TOSHIBA_RBTX4927_IRQ_IOC_END  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END)	/* 63 */
 
-
-#define TOSHIBA_RBTX4927_IRQ_ISA_BEG MI8259_IRQ_ISA_BEG
-#define TOSHIBA_RBTX4927_IRQ_ISA_END MI8259_IRQ_ISA_END
-#define TOSHIBA_RBTX4927_IRQ_ISA_MID ((TOSHIBA_RBTX4927_IRQ_ISA_BEG+TOSHIBA_RBTX4927_IRQ_ISA_END+1)/2)
-
-
 #define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC
 #define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2)
-#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA (TOSHIBA_RBTX4927_IRQ_ISA_BEG+2)
 
 extern int tx4927_using_backplane;
 
-#ifdef CONFIG_TOSHIBA_FPCIB0
-extern void enable_8259A_irq(unsigned int irq);
-extern void disable_8259A_irq(unsigned int irq);
-extern void mask_and_ack_8259A(unsigned int irq);
-#endif
-
 static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
 static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
 
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq);
-static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq);
-static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq);
-#endif
-
 #define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
 static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
 	.name = TOSHIBA_RBTX4927_IOC_NAME,
@@ -235,18 +208,6 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
 #define TOSHIBA_RBTX4927_IOC_INTR_STAT 0xbc002006
 
 
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA"
-static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
-	.name = TOSHIBA_RBTX4927_ISA_NAME,
-	.ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
-	.mask = toshiba_rbtx4927_irq_isa_disable,
-	.mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
-	.unmask = toshiba_rbtx4927_irq_isa_enable,
-};
-#endif
-
-
 u32 bit2num(u32 num)
 {
 	u32 i;
@@ -271,31 +232,10 @@ int toshiba_rbtx4927_irq_nested(int sw_irq)
 		}
 	}
 #ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			u32 level4;
-			u32 level5;
-			outb(0x0A, 0x20);
-			level4 = inb(0x20) & 0xff;
-			if (level4) {
-				sw_irq =
-				    TOSHIBA_RBTX4927_IRQ_ISA_BEG +
-				    bit2num(level4);
-				if (sw_irq !=
-				    TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA) {
-					goto RETURN;
-				}
-			}
-
-			outb(0x0A, 0xA0);
-			level5 = inb(0xA0) & 0xff;
-			if (level5) {
-				sw_irq =
-				    TOSHIBA_RBTX4927_IRQ_ISA_MID +
-				    bit2num(level5);
-				goto RETURN;
-			}
-		}
+	if (tx4927_using_backplane) {
+		int irq = i8259_irq();
+		if (irq >= 0)
+			sw_irq = irq;
 	}
 #endif
 
@@ -307,12 +247,6 @@ int toshiba_rbtx4927_irq_nested(int sw_irq)
 #define TOSHIBA_RBTX4927_PIC_ACTION(s) { no_action, IRQF_SHARED, CPU_MASK_NONE, s, NULL, NULL }
 static struct irqaction toshiba_rbtx4927_irq_ioc_action =
 TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_IOC_NAME);
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static struct irqaction toshiba_rbtx4927_irq_isa_master =
-TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_ISA_NAME "/M");
-static struct irqaction toshiba_rbtx4927_irq_isa_slave =
-TOSHIBA_RBTX4927_PIC_ACTION(TOSHIBA_RBTX4927_ISA_NAME "/S");
-#endif
 
 
 /**********************************************************************************/
@@ -378,92 +312,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
 }
 
 
-/**********************************************************************************/
-/* Functions for isa                                                              */
-/**********************************************************************************/
-
-
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init toshiba_rbtx4927_irq_isa_init(void)
-{
-	int i;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_INIT,
-				     "beg=%d end=%d\n",
-				     TOSHIBA_RBTX4927_IRQ_ISA_BEG,
-				     TOSHIBA_RBTX4927_IRQ_ISA_END);
-
-	for (i = TOSHIBA_RBTX4927_IRQ_ISA_BEG;
-	     i <= TOSHIBA_RBTX4927_IRQ_ISA_END; i++)
-		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_isa_type,
-					 handle_level_irq);
-
-	setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC,
-		  &toshiba_rbtx4927_irq_isa_master);
-	setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_ISA,
-		  &toshiba_rbtx4927_irq_isa_slave);
-
-	/* make sure we are looking at IRR (not ISR) */
-	outb(0x0A, 0x20);
-	outb(0x0A, 0xA0);
-}
-#endif
-
-
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_enable(unsigned int irq)
-{
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_ENABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	enable_8259A_irq(irq);
-}
-#endif
-
-
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_disable(unsigned int irq)
-{
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_DISABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	disable_8259A_irq(irq);
-}
-#endif
-
-
-#ifdef CONFIG_TOSHIBA_FPCIB0
-static void toshiba_rbtx4927_irq_isa_mask_and_ack(unsigned int irq)
-{
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_ISA_MASK,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_ISA_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_ISA_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	mask_and_ack_8259A(irq);
-}
-#endif
-
-
 void __init arch_init_irq(void)
 {
 	extern void tx4927_irq_init(void);
@@ -471,12 +319,11 @@ void __init arch_init_irq(void)
 	tx4927_irq_init();
 	toshiba_rbtx4927_irq_ioc_init();
 #ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			toshiba_rbtx4927_irq_isa_init();
-		}
-	}
+	if (tx4927_using_backplane)
+		init_i8259_irqs();
 #endif
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
 
 	wbflush();
 }
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
index ea5a70b..3e84237 100644
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
@@ -151,7 +151,6 @@ unsigned long mips_memory_upper;
 static int tx4927_ccfg_toeon = 1;
 static int tx4927_pcic_trdyto = 0;	/* default: disabled */
 unsigned long tx4927_ce_base[8];
-void tx4927_pci_setup(void);
 void tx4927_reset_pci_pcic(void);
 int tx4927_pci66 = 0;		/* 0:auto */
 #endif
@@ -442,7 +441,7 @@ arch_initcall(tx4927_pcibios_init);
 extern struct resource pci_io_resource;
 extern struct resource pci_mem_resource;
 
-void tx4927_pci_setup(void)
+void __init tx4927_pci_setup(void)
 {
 	static int called = 0;
 	extern unsigned int tx4927_get_mem_size(void);
@@ -748,12 +747,6 @@ void __init toshiba_rbtx4927_setup(void)
 	}
 #endif
 
-	/* setup irq stuff */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Setting up tx4927 pic.\n");
-	TX4927_WR(0xff1ff604, 0x00000400);	/* irq trigger */
-	TX4927_WR(0xff1ff608, 0x00000000);	/* irq trigger */
-
 	/* setup serial stuff */
 	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
 				       ":Setting up tx4927 sio.\n");
@@ -915,7 +908,7 @@ void __init toshiba_rbtx4927_setup(void)
 			req.iotype = UPIO_MEM;
 			req.membase = (char *)(0xff1ff300 + i * 0x100);
 			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = 32 + i;
+			req.irq = TX4927_IRQ_PIC_BEG + 8 + i;
 			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
 			req.uartclk = 50000000;
 			early_serial_txx9_setup(&req);
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
index 83cda51..8352eca 100644
--- a/arch/mips/tx4938/common/Makefile
+++ b/arch/mips/tx4938/common/Makefile
@@ -9,3 +9,4 @@
 obj-y	+= prom.o setup.o irq.o
 obj-$(CONFIG_KGDB) += dbgio.o
 
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
index 3a2dbfc..c059b89 100644
--- a/arch/mips/tx4938/common/irq.c
+++ b/arch/mips/tx4938/common/irq.c
@@ -11,284 +11,21 @@
  *
  * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
  */
-#include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
 #include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/irq.h>
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/wbflush.h>
 #include <asm/tx4938/rbtx4938.h>
 
-/**********************************************************************************/
-/* Forwad definitions for all pic's                                               */
-/**********************************************************************************/
-
-static void tx4938_irq_cp0_enable(unsigned int irq);
-static void tx4938_irq_cp0_disable(unsigned int irq);
-
-static void tx4938_irq_pic_enable(unsigned int irq);
-static void tx4938_irq_pic_disable(unsigned int irq);
-
-/**********************************************************************************/
-/* Kernel structs for all pic's                                                   */
-/**********************************************************************************/
-
-#define TX4938_CP0_NAME "TX4938-CP0"
-static struct irq_chip tx4938_irq_cp0_type = {
-	.name = TX4938_CP0_NAME,
-	.ack = tx4938_irq_cp0_disable,
-	.mask = tx4938_irq_cp0_disable,
-	.mask_ack = tx4938_irq_cp0_disable,
-	.unmask = tx4938_irq_cp0_enable,
-};
-
-#define TX4938_PIC_NAME "TX4938-PIC"
-static struct irq_chip tx4938_irq_pic_type = {
-	.name = TX4938_PIC_NAME,
-	.ack = tx4938_irq_pic_disable,
-	.mask = tx4938_irq_pic_disable,
-	.mask_ack = tx4938_irq_pic_disable,
-	.unmask = tx4938_irq_pic_enable,
-};
-
-static struct irqaction tx4938_irq_pic_action = {
-	.handler = no_action,
-	.flags = 0,
-	.mask = CPU_MASK_NONE,
-	.name = TX4938_PIC_NAME
-};
-
-/**********************************************************************************/
-/* Functions for cp0                                                              */
-/**********************************************************************************/
-
-#define tx4938_irq_cp0_mask(irq) ( 1 << ( irq-TX4938_IRQ_CP0_BEG+8 ) )
-
-static void __init
-tx4938_irq_cp0_init(void)
-{
-	int i;
-
-	for (i = TX4938_IRQ_CP0_BEG; i <= TX4938_IRQ_CP0_END; i++)
-		set_irq_chip_and_handler(i, &tx4938_irq_cp0_type,
-					 handle_level_irq);
-}
-
-static void
-tx4938_irq_cp0_enable(unsigned int irq)
-{
-	set_c0_status(tx4938_irq_cp0_mask(irq));
-}
-
-static void
-tx4938_irq_cp0_disable(unsigned int irq)
-{
-	clear_c0_status(tx4938_irq_cp0_mask(irq));
-}
-
-/**********************************************************************************/
-/* Functions for pic                                                              */
-/**********************************************************************************/
-
-u32
-tx4938_irq_pic_addr(int irq)
-{
-	/* MVMCP -- need to formulize this */
-	irq -= TX4938_IRQ_PIC_BEG;
-
-	switch (irq) {
-	case 17:
-	case 16:
-	case 1:
-	case 0:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL0));
-		}
-	case 19:
-	case 18:
-	case 3:
-	case 2:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL1));
-		}
-	case 21:
-	case 20:
-	case 5:
-	case 4:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL2));
-		}
-	case 23:
-	case 22:
-	case 7:
-	case 6:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL3));
-		}
-	case 25:
-	case 24:
-	case 9:
-	case 8:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL4));
-		}
-	case 27:
-	case 26:
-	case 11:
-	case 10:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL5));
-		}
-	case 29:
-	case 28:
-	case 13:
-	case 12:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL6));
-		}
-	case 31:
-	case 30:
-	case 15:
-	case 14:{
-			return (TX4938_MKA(TX4938_IRC_IRLVL7));
-		}
-	}
-
-	return 0;
-}
-
-u32
-tx4938_irq_pic_mask(int irq)
-{
-	/* MVMCP -- need to formulize this */
-	irq -= TX4938_IRQ_PIC_BEG;
-
-	switch (irq) {
-	case 31:
-	case 29:
-	case 27:
-	case 25:
-	case 23:
-	case 21:
-	case 19:
-	case 17:{
-			return (0x07000000);
-		}
-	case 30:
-	case 28:
-	case 26:
-	case 24:
-	case 22:
-	case 20:
-	case 18:
-	case 16:{
-			return (0x00070000);
-		}
-	case 15:
-	case 13:
-	case 11:
-	case 9:
-	case 7:
-	case 5:
-	case 3:
-	case 1:{
-			return (0x00000700);
-		}
-	case 14:
-	case 12:
-	case 10:
-	case 8:
-	case 6:
-	case 4:
-	case 2:
-	case 0:{
-			return (0x00000007);
-		}
-	}
-	return 0x00000000;
-}
-
-static void
-tx4938_irq_pic_modify(unsigned pic_reg, unsigned clr_bits, unsigned set_bits)
-{
-	unsigned long val = 0;
-
-	val = TX4938_RD(pic_reg);
-	val &= (~clr_bits);
-	val |= (set_bits);
-	TX4938_WR(pic_reg, val);
-	mmiowb();
-	TX4938_RD(pic_reg);
-}
-
-static void __init
-tx4938_irq_pic_init(void)
-{
-	int i;
-
-	for (i = TX4938_IRQ_PIC_BEG; i <= TX4938_IRQ_PIC_END; i++)
-		set_irq_chip_and_handler(i, &tx4938_irq_pic_type,
-					 handle_level_irq);
-
-	setup_irq(TX4938_IRQ_NEST_PIC_ON_CP0, &tx4938_irq_pic_action);
-
-	TX4938_WR(0xff1ff640, 0x6);	/* irq level mask -- only accept hightest */
-	TX4938_WR(0xff1ff600, TX4938_RD(0xff1ff600) | 0x1);	/* irq enable */
-}
-
-static void
-tx4938_irq_pic_enable(unsigned int irq)
-{
-	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq), 0,
-			      tx4938_irq_pic_mask(irq));
-}
-
-static void
-tx4938_irq_pic_disable(unsigned int irq)
-{
-	tx4938_irq_pic_modify(tx4938_irq_pic_addr(irq),
-			      tx4938_irq_pic_mask(irq), 0);
-}
-
-/**********************************************************************************/
-/* Main init functions                                                            */
-/**********************************************************************************/
-
 void __init
 tx4938_irq_init(void)
 {
-	tx4938_irq_cp0_init();
-	tx4938_irq_pic_init();
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4938_IRC_REG);
+	set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
 }
 
-int
-tx4938_irq_nested(void)
-{
-	int sw_irq = 0;
-	u32 level2;
-
-	level2 = TX4938_RD(0xff1ff6a0);
-	if ((level2 & 0x10000) == 0) {
-		level2 &= 0x1f;
-		sw_irq = TX4938_IRQ_PIC_BEG + level2;
-		if (sw_irq == 26) {
-			{
-				extern int toshiba_rbtx4938_irq_nested(int sw_irq);
-				sw_irq = toshiba_rbtx4938_irq_nested(sw_irq);
-			}
-		}
-	}
-
-	wbflush();
-	return sw_irq;
-}
+int toshiba_rbtx4938_irq_nested(int irq);
 
 asmlinkage void plat_irq_dispatch(void)
 {
@@ -297,8 +34,10 @@ asmlinkage void plat_irq_dispatch(void)
 	if (pending & STATUSF_IP7)
 		do_IRQ(TX4938_IRQ_CPU_TIMER);
 	else if (pending & STATUSF_IP2) {
-		int irq = tx4938_irq_nested();
-		if (irq)
+		int irq = txx9_irq();
+		if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0))
+			irq = toshiba_rbtx4938_irq_nested(irq);
+		if (irq >= 0)
 			do_IRQ(irq);
 		else
 			spurious_interrupt();
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
index 10c94e6..675bb1c 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile
+++ b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
@@ -7,3 +7,5 @@
 #
 
 obj-y	+= prom.o setup.o irq.o spi_eeprom.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
index 91aea7af..f001850 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
@@ -181,7 +181,7 @@ void __init arch_init_irq(void)
 	tx4938_irq_init();
 	toshiba_rbtx4938_irq_ioc_init();
 	/* Onboard 10M Ether: High Active */
-	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000040);
+	set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
 
 	wbflush();
 }
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
index f9ad482..84ebff7 100644
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
@@ -773,10 +773,6 @@ void __init tx4938_board_setup(void)
 		 txboard_add_phys_region(base, size);
 	}
 
-	/* IRC */
-	/* disable interrupt control */
-	tx4938_ircptr->cer = 0;
-
 	/* TMR */
 	/* disable all timers */
 	for (i = 0; i < TX4938_NR_TMR; i++) {
@@ -875,9 +871,6 @@ void __init toshiba_rbtx4938_setup(void)
 	if (txx9_master_clock == 0)
 		txx9_master_clock = 25000000; /* 25MHz */
 	tx4938_board_setup();
-	/* setup irq stuff */
-	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM0), 0x00000000);	/* irq trigger */
-	TX4938_WR(TX4938_MKA(TX4938_IRC_IRDM1), 0x00000000);	/* irq trigger */
 	/* setup serial stuff */
 	TX4938_WR(0xff1ff314, 0x00000000);	/* h/w flow control off */
 	TX4938_WR(0xff1ff414, 0x00000000);	/* h/w flow control off */
@@ -897,7 +890,7 @@ void __init toshiba_rbtx4938_setup(void)
 			req.iotype = UPIO_MEM;
 			req.membase = (char *)(0xff1ff300 + i * 0x100);
 			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = 32 + i;
+			req.irq = RBTX4938_IRQ_IRC_SIO(i);
 			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
 			req.uartclk = 50000000;
 			early_serial_txx9_setup(&req);
@@ -1122,7 +1115,7 @@ static void __init txx9_spi_init(unsigned long base, int irq)
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
-		.modalias = "rs5c348",
+		.modalias = "rtc-rs5c348",
 		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
 		.bus_num = 0,
 		.chip_select = 16 + SRTC_CS,
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index bb23ff7..2989c66 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -285,147 +285,6 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
 	return err;
 }
 
-struct linux32_dirent {
-	u32		d_ino;
-	compat_off_t	d_off;
-	u16		d_reclen;
-	char		d_name[1];
-};
-
-struct old_linux32_dirent {
-	u32	d_ino;
-	u32	d_offset;
-	u16	d_namlen;
-	char	d_name[1];
-};
-
-struct getdents32_callback {
-	struct linux32_dirent __user * current_dir;
-	struct linux32_dirent __user * previous;
-	int count;
-	int error;
-};
-
-struct readdir32_callback {
-	struct old_linux32_dirent __user * dirent;
-	int count;
-};
-
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
-static int filldir32 (void *__buf, const char *name, int namlen,
-			loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct linux32_dirent __user * dirent;
-	struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
-	int reclen = ALIGN(NAME_OFFSET(dirent) + namlen + 1, 4);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		put_user(offset, &dirent->d_off);
-	dirent = buf->current_dir;
-	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(reclen, &dirent->d_reclen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = ((void __user *)dirent) + reclen;
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, void __user * dirent, unsigned int count)
-{
-	struct file * file;
-	struct linux32_dirent __user * lastdirent;
-	struct getdents32_callback buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = (struct linux32_dirent __user *) dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-static int fillonedir32(void * __buf, const char * name, int namlen,
-			loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
-	struct old_linux32_dirent __user * dirent;
-	u32 d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(offset, &dirent->d_offset);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user * dirent, unsigned int count)
-{
-	int error;
-	struct file * file;
-	struct readdir32_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, fillonedir32, &buf);
-	if (error >= 0)
-		error = buf.count;
-	fput(file);
-out:
-	return error;
-}
-
 /*** copied from mips64 ***/
 /*
  * Ooo, nasty.  We need here to frob 32-bit unsigned longs to
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 627f3c2..2540786 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -222,9 +222,7 @@
 	ENTRY_SAME(setfsgid)
 	/* I think this might work */
 	ENTRY_SAME(llseek)		/* 140 */
-	/* struct linux_dirent has longs, like 'unsigned long d_ino' which
-	 * almost definitely should be 'ino_t d_ino' but it's too late now */
-	ENTRY_DIFF(getdents)
+	ENTRY_COMP(getdents)
 	/* it is POSSIBLE that select will be OK because even though fd_set
 	 * contains longs, the macros and sizes are clever. */
 	ENTRY_COMP(select)
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index d4e6a93..ee7a16e 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -81,6 +81,8 @@ SECTIONS
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
 
+  NOTES
+
   __start___unwind = .;         /* unwind info */
   .PARISC.unwind : { *(.PARISC.unwind) }
   __stop___unwind = .;
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 4680e20..3e79bf0 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -44,8 +44,18 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00100000>;	// CCSRBAR 1M
+
+
+		ranges = <00001000 e0001000 000ff000
+			  80000000 80000000 20000000
+			  a0000000 a0000000 10000000
+			  b0000000 b0000000 00100000
+			  c0000000 c0000000 20000000
+			  b0100000 b0100000 00100000
+			  e1000000 e1000000 00010000
+			  e1010000 e1010000 00010000
+			  e1020000 e1020000 00010000>;
+		reg = <e0000000 00001000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
@@ -161,8 +171,8 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 80000000 80000000 0 10000000
-				  01000000 0 00000000 e2000000 0 00800000>;
+			ranges = <02000000 0 c0000000 c0000000 0 20000000
+				  01000000 0 00000000 e1000000 0 00010000>;
 			clock-frequency = <3f940aa>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
@@ -178,8 +188,8 @@
 			#address-cells = <3>;
 			reg = <9000 1000>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 90000000 90000000 0 10000000
-				  01000000 0 00000000 e3000000 0 00800000>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e1010000 0 00010000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <1a 2>;
@@ -202,7 +212,7 @@
 			reg = <a000 1000>;
 			bus-range = <0 ff>;
 			ranges = <02000000 0 a0000000 a0000000 0 10000000
-				  01000000 0 00000000 e2800000 0 00800000>;
+				  01000000 0 00000000 e1020000 0 00010000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <19 2>;
@@ -224,49 +234,29 @@
 			#address-cells = <3>;
 			reg = <b000 1000>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 b0000000 b0000000 0 10000000
-				  01000000 0 00000000 e3800000 0 00800000>;
+			ranges = <02000000 0 b0000000 b0000000 0 00100000
+				  01000000 0 00000000 b0100000 0 00100000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <1b 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <fb00 0 0 0>;
 			interrupt-map = <
-
-				// IDSEL 0x1a
-				d000 0 0 1 &i8259 6 2
-				d000 0 0 2 &i8259 3 2
-				d000 0 0 3 &i8259 4 2
-				d000 0 0 4 &i8259 5 2
-
-				// IDSEL 0x1b
-				d800 0 0 1 &i8259 5 2
-				d800 0 0 2 &i8259 0 0
-				d800 0 0 3 &i8259 0 0
-				d800 0 0 4 &i8259 0 0
-
 				// IDSEL 0x1c  USB
-				e000 0 0 1 &i8259 9 2
-				e000 0 0 2 &i8259 a 2
-				e000 0 0 3 &i8259 c 2
-				e000 0 0 4 &i8259 7 2
+				e000 0 0 0 &i8259 c 2
+				e100 0 0 0 &i8259 9 2
+				e200 0 0 0 &i8259 a 2
+				e300 0 0 0 &i8259 b 2
 
 				// IDSEL 0x1d  Audio
-				e800 0 0 1 &i8259 9 2
-				e800 0 0 2 &i8259 a 2
-				e800 0 0 3 &i8259 b 2
-				e800 0 0 4 &i8259 0 0
+				e800 0 0 0 &i8259 6 2
 
 				// IDSEL 0x1e Legacy
-				f000 0 0 1 &i8259 c 2
-				f000 0 0 2 &i8259 0 0
-				f000 0 0 3 &i8259 0 0
-				f000 0 0 4 &i8259 0 0
+				f000 0 0 0 &i8259 7 2
+				f100 0 0 0 &i8259 7 2
 
 				// IDSEL 0x1f IDE/SATA
-				f800 0 0 1 &i8259 6 2
-				f800 0 0 2 &i8259 0 0
-				f800 0 0 3 &i8259 0 0
-				f800 0 0 4 &i8259 0 0
+				f800 0 0 0 &i8259 e 2
+				f900 0 0 0 &i8259 5 2
 			>;
 			uli1575@0 {
 				reg = <0 0 0 0 0>;
@@ -274,10 +264,10 @@
 				#address-cells = <3>;
 				ranges = <02000000 0 b0000000
 					  02000000 0 b0000000
-					  0 10000000
+					  0 00100000
 					  01000000 0 00000000
 					  01000000 0 00000000
-					  0 00080000>;
+					  0 00100000>;
 
 				pci_bridge@0 {
 					reg = <0 0 0 0 0>;
@@ -285,10 +275,10 @@
 					#address-cells = <3>;
 					ranges = <02000000 0 b0000000
 						  02000000 0 b0000000
-						  0 20000000
+						  0 00100000
 						  01000000 0 00000000
 						  01000000 0 00000000
-						  0 00100000>;
+						  0 00100000>; 
 
 					isa@1e {
 						device_type = "isa";
@@ -296,7 +286,8 @@
 						#size-cells = <1>;
 						#address-cells = <2>;
 						reg = <f000 0 0 0 0>;
-						ranges = <1 0 01000000 0 0
+						ranges = <1 0
+							  01000000 0 0
 							  00001000>;
 						interrupt-parent = <&i8259>;
 
@@ -312,8 +303,7 @@
 							built-in;
 							compatible = "chrp,iic";
 							interrupts = <9 2>;
-							interrupt-parent =
-								<&mpic>;
+							interrupt-parent = <&mpic>;
 						};
 
 						i8042@60 {
@@ -321,8 +311,7 @@
 							#address-cells = <1>;
 							reg = <1 60 1 1 64 1>;
 							interrupts = <1 3 c 3>;
-							interrupt-parent =
-								<&i8259>;
+							interrupt-parent = <&i8259>;
 
 							keyboard@0 {
 								reg = <0>;
@@ -336,8 +325,7 @@
 						};
 
 						rtc@70 {
-							compatible =
-								"pnpPNP,b00";
+							compatible = "pnpPNP,b00";
 							reg = <1 70 2>;
 						};
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 5d82709..b0166e5 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -224,98 +224,36 @@
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <fb00 0 0 0>;
 			interrupt-map = <
 				/* IDSEL 0x11 */
-				8800 0 0 1 &i8259 3 2
-				8800 0 0 2 &i8259 4 2
-				8800 0 0 3 &i8259 5 2
-				8800 0 0 4 &i8259 6 2
+				8800 0 0 1 &i8259 9 2
+				8800 0 0 2 &i8259 a 2
+				8800 0 0 3 &i8259 b 2
+				8800 0 0 4 &i8259 c 2
 
 				/* IDSEL 0x12 */
-				9000 0 0 1 &i8259 4 2
-				9000 0 0 2 &i8259 5 2
-				9000 0 0 3 &i8259 6 2
-				9000 0 0 4 &i8259 3 2
-
-				/* IDSEL 0x13 */
-				9800 0 0 1 &i8259 0 0
-				9800 0 0 2 &i8259 0 0
-				9800 0 0 3 &i8259 0 0
-				9800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x14 */
-				a000 0 0 1 &i8259 0 0
-				a000 0 0 2 &i8259 0 0
-				a000 0 0 3 &i8259 0 0
-				a000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x15 */
-				a800 0 0 1 &i8259 0 0
-				a800 0 0 2 &i8259 0 0
-				a800 0 0 3 &i8259 0 0
-				a800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x16 */
-				b000 0 0 1 &i8259 0 0
-				b000 0 0 2 &i8259 0 0
-				b000 0 0 3 &i8259 0 0
-				b000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x17 */
-				b800 0 0 1 &i8259 0 0
-				b800 0 0 2 &i8259 0 0
-				b800 0 0 3 &i8259 0 0
-				b800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x18 */
-				c000 0 0 1 &i8259 0 0
-				c000 0 0 2 &i8259 0 0
-				c000 0 0 3 &i8259 0 0
-				c000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x19 */
-				c800 0 0 1 &i8259 0 0
-				c800 0 0 2 &i8259 0 0
-				c800 0 0 3 &i8259 0 0
-				c800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1a */
-				d000 0 0 1 &i8259 6 2
-				d000 0 0 2 &i8259 3 2
-				d000 0 0 3 &i8259 4 2
-				d000 0 0 4 &i8259 5 2
-
-
-				/* IDSEL 0x1b */
-				d800 0 0 1 &i8259 5 2
-				d800 0 0 2 &i8259 0 0
-				d800 0 0 3 &i8259 0 0
-				d800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1c */
-				e000 0 0 1 &i8259 9 2
-				e000 0 0 2 &i8259 a 2
-				e000 0 0 3 &i8259 c 2
-				e000 0 0 4 &i8259 7 2
-
-				/* IDSEL 0x1d */
-				e800 0 0 1 &i8259 9 2
-				e800 0 0 2 &i8259 a 2
-				e800 0 0 3 &i8259 b 2
-				e800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1e */
-				f000 0 0 1 &i8259 c 2
-				f000 0 0 2 &i8259 0 0
-				f000 0 0 3 &i8259 0 0
-				f000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1f */
-				f800 0 0 1 &i8259 6 2
-				f800 0 0 2 &i8259 0 0
-				f800 0 0 3 &i8259 0 0
-				f800 0 0 4 &i8259 0 0
+				9000 0 0 1 &i8259 a 2
+				9000 0 0 2 &i8259 b 2
+				9000 0 0 3 &i8259 c 2
+				9000 0 0 4 &i8259 9 2
+
+				// IDSEL 0x1c  USB
+				e000 0 0 0 &i8259 c 2
+				e100 0 0 0 &i8259 9 2
+				e200 0 0 0 &i8259 a 2
+				e300 0 0 0 &i8259 b 2
+
+				// IDSEL 0x1d  Audio
+				e800 0 0 0 &i8259 6 2
+
+				// IDSEL 0x1e Legacy
+				f000 0 0 0 &i8259 7 2
+				f100 0 0 0 &i8259 7 2
+
+				// IDSEL 0x1f IDE/SATA
+				f800 0 0 0 &i8259 e 2
+				f900 0 0 0 &i8259 5 2
 				>;
 			uli1575@0 {
 				reg = <0 0 0 0 0>;
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index d9ac24e..8b47c84 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,9 +1,23 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc6
-# Tue Jun 26 12:32:34 2007
+# Linux kernel version: 2.6.23-rc3
+# Wed Aug 22 15:19:19 2007
 #
 CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_MM_SLICES=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
@@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -22,51 +37,33 @@ CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
+CONFIG_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-CONFIG_PPC_FPU=y
 # CONFIG_PPC_DCR_NATIVE is not set
 CONFIG_PPC_DCR_MMIO=y
 CONFIG_PPC_DCR=y
 CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -96,16 +93,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -113,12 +107,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -138,7 +129,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_EMBEDDED6xx is not set
-# CONFIG_APUS is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_MPC52xx is not set
@@ -158,7 +151,11 @@ CONFIG_PS3_HTAB_SIZE=20
 CONFIG_PS3_USE_LPAR_ADDR=y
 CONFIG_PS3_VUART=y
 CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_STORAGE=y
+CONFIG_PS3_DISK=y
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
@@ -171,6 +168,7 @@ CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
+CONFIG_CBE_CPUFREQ_PMI=m
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
@@ -183,7 +181,7 @@ CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
-# CONFIG_PPC_PMI is not set
+CONFIG_PPC_PMI=m
 CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
@@ -206,6 +204,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 # CPU Frequency drivers
 #
 # CONFIG_CPM2 is not set
+CONFIG_AXON_RAM=m
+# CONFIG_FSL_ULI1575 is not set
 
 #
 # Kernel options
@@ -248,6 +248,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_PPC_HAS_HASH_64K=y
@@ -268,7 +269,9 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_DEBUG is not set
@@ -359,6 +362,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -377,6 +381,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -448,6 +453,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -462,28 +468,12 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -499,14 +489,11 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
@@ -572,6 +559,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -604,10 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -622,7 +607,6 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -696,10 +680,6 @@ CONFIG_PATA_PDC2027X=m
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_SCC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -717,6 +697,7 @@ CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
 
 #
@@ -728,43 +709,30 @@ CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 CONFIG_BONDING=m
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
@@ -781,11 +749,12 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 CONFIG_SKGE=m
 CONFIG_SKY2=m
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
+CONFIG_GELIC_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
@@ -824,15 +793,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -925,10 +886,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
-
-#
-# IPMI
-#
 CONFIG_IPMI_HANDLER=m
 # CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -963,10 +920,6 @@ CONFIG_GEN_RTC=y
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
@@ -1000,6 +953,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
@@ -1011,11 +965,13 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1026,11 +982,8 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 
 #
@@ -1055,6 +1008,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 
@@ -1068,10 +1022,7 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 
@@ -1085,10 +1036,7 @@ CONFIG_HID=m
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1122,6 +1070,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1199,23 +1148,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1231,14 +1164,13 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 # CONFIG_INFINIBAND_SRP is not set
 # CONFIG_INFINIBAND_ISER is not set
+CONFIG_EDAC=y
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
+# Reporting subsystems
 #
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1255,6 +1187,12 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 
 #
+# Userspace I/O
+#
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1357,7 +1295,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1439,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
@@ -1471,9 +1409,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1504,10 +1443,6 @@ CONFIG_IRQSTACKS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
@@ -1546,7 +1481,4 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 2bb1cb9..d8502e3 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs)
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs)
 		printk("Data Cache Push Parity Error\n");
 	if (reason & MCSR_DCPERR)
 		printk("Data Cache Parity Error\n");
-	if (reason & MCSR_GL_CI)
-		printk("Guarded Load or Cache-Inhibited stwcx.\n");
 	if (reason & MCSR_BUS_IAERR)
 		printk("Bus - Instruction Address Error\n");
 	if (reason & MCSR_BUS_RAERR)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a73d2d7..ff1811a 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -74,6 +74,22 @@ static inline void slb_shadow_clear(unsigned long entry)
 	get_slb_shadow()->save_area[entry].esid = 0;
 }
 
+static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags,
+					unsigned long entry)
+{
+	/*
+	 * Updating the shadow buffer before writing the SLB ensures
+	 * we don't get a stale entry here if we get preempted by PHYP
+	 * between these two statements.
+	 */
+	slb_shadow_update(ea, flags, entry);
+
+	asm volatile("slbmte  %0,%1" :
+		     : "r" (mk_vsid_data(ea, flags)),
+		       "r" (mk_esid_data(ea, entry))
+		     : "memory" );
+}
+
 void slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
@@ -226,12 +242,16 @@ void slb_initialize(void)
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
 	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
-	slb_shadow_update(PAGE_OFFSET, lflags, 0);
-	asm volatile("isync; slbia; sync; slbmte  %0,%1; isync" ::
-		     "r" (get_slb_shadow()->save_area[0].vsid),
-		     "r" (get_slb_shadow()->save_area[0].esid) : "memory");
-
-	slb_shadow_update(VMALLOC_START, vflags, 1);
-
-	slb_flush_and_rebolt();
+	asm volatile("isync":::"memory");
+	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
+	asm volatile("isync; slbia; isync":::"memory");
+	create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
+
+	create_shadowed_slbe(VMALLOC_START, vflags, 1);
+
+	/* We don't bolt the stack for the time being - we're in boot,
+	 * so the stack is in the bolted segment.  By the time it goes
+	 * elsewhere, we'll call _switch() which will bolt in the new
+	 * one. */
+	asm volatile("isync":::"memory");
 }
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f581840..f620171 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,6 +33,7 @@ config MPC8544_DS
 	bool "Freescale MPC8544 DS"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8544 DS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
index 4905f6f..0f834d8 100644
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn);
 
-/*
- * Value in  table -- IRQ number
- */
-const unsigned char uli1575_irq_route_table[16] = {
-	0,		/* 0: Reserved */
-	0x8,
-	0,		/* 2: Reserved */
-	0x2,
-	0x4,
-	0x5,
-	0x7,
-	0x6,
-	0,		/* 8: Reserved */
-	0x1,
-	0x3,
-	0x9,
-	0xb,
-	0,		/* 13: Reserved */
-	0xd,
-	0xf,
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
-	struct of_irq oirq;
-	u32 laddr[3];
-	struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
-	if (!hosenode)
-		return -EINVAL;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
-	    laddr[0], slot, pin, oirq.specifier[0]);
-	return oirq.specifier[0];
-}
-
-/*8259*/
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	unsigned short temp;
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned char irq2pin[16];
-	unsigned long pirq_map_word = 0;
-	u32 irq;
-	int i;
-
-	/*
-	 * ULI1575 interrupts route setup
-	 */
-	memset(irq2pin, 0, 16);	/* Initialize default value 0 */
-
-	irq2pin[6]=PIRQA+3;	/* enabled mapping for IRQ6 to PIRQD, used by SATA */
-
-	/*
-	 * PIRQE -> PIRQF mapping set manually
-	 *
-	 * IRQ pin   IRQ#
-	 * PIRQE ---- 9
-	 * PIRQF ---- 10
-	 * PIRQG ---- 11
-	 * PIRQH ---- 12
-	 */
-	for (i = 0; i < 4; i++)
-		irq2pin[i + 9] = PIRQE + i;
-
-	/* Set IRQ-PIRQ Mapping to ULI1575 */
-	for (i = 0; i < 16; i++)
-		if (irq2pin[i])
-			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
-			    << ((irq2pin[i] - PIRQA) * 4);
-
-	pirq_map_word |= 1<<26;	/* disable INTx in EP mode*/
-
-	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
-	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
-		(int)pirq_map_word);
-	pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg)				\
-	do {								\
-		int irq;						\
-		irq = get_pci_irq_from_of(hose, slot, pin);		\
-		if (irq > 0 && irq < 16) 				\
-			pci_write_config_byte(dev, reg, irq2pin[irq]);	\
-		else							\
-			printk(KERN_WARNING "ULI1575 device"		\
-				"(slot %d, pin %d) irq %d is invalid.\n", \
-				slot, pin, irq);			\
-	} while(0)
-
-	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
-	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
-	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
-	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
-	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
-	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
-	/* USB 2.0 controller, slot 28, pin 4 */
-	irq = get_pci_irq_from_of(hose, 28, 4);
-	if (irq >= 0 && irq <= 15)
-		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
-	/* Audio controller, slot 29, pin 1 */
-	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
-	/* Modem controller, slot 29, pin 2 */
-	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
-	/* HD audio controller, slot 29, pin 3 */
-	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
-	/* SMB interrupt: slot 30, pin 1 */
-	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
-	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
-	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
-	/* Serial ATA interrupt: slot 31, pin 1 */
-	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
-	/* Primary PATA IDE IRQ: 14
-	 * Secondary PATA IDE IRQ: 15
-	 */
-	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
-	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
-	/* Set IRQ14 and IRQ15 to legacy IRQs */
-	pci_read_config_word(dev, 0x46, &temp);
-	temp |= 0xc000;
-	pci_write_config_word(dev, 0x46, temp);
-
-	/* Set i8259 interrupt trigger
-	 * IRQ 3:  Level
-	 * IRQ 4:  Level
-	 * IRQ 5:  Level
-	 * IRQ 6:  Level
-	 * IRQ 7:  Level
-	 * IRQ 9:  Level
-	 * IRQ 10: Level
-	 * IRQ 11: Level
-	 * IRQ 12: Level
-	 * IRQ 14: Edge
-	 * IRQ 15: Edge
-	 */
-	outb(0xfa, 0x4d0);
-	outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-}
-
-/* SATA */
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
 {
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;		/* read/write lock */
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, 0x09, 0x01);	/* Base class code: storage */
-	pci_write_config_byte(dev, 0x0a, 0x06);	/* IDE disk */
+	struct device_node* node;	
+	struct resource rsrc;
 
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_read_config_byte(dev, 0x84, &c);
-	c |= 0x01;				/* emulated PATA mode enabled */
-	pci_write_config_byte(dev, 0x84, c);
-}
+	node = (struct device_node *)hose->arch_data;
+	of_address_to_resource(node, 0, &rsrc);
 
-/* PATA */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned short temp;
-	pci_write_config_word(dev, 0x04, 0x0405);	/* MEM IO MSI */
-	pci_read_config_word(dev, 0x4a, &temp);
-	temp |= 0x1000;				/* Enable Native IRQ 14/15 */
-	pci_write_config_word(dev, 0x4a, temp);
-}
+	if ((rsrc.start & 0xfffff) == 0xb000) {
+		return uli_exclude_device(hose, bus, devfn);
+	}
 
-/*Bridge*/
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
-	unsigned char temp;
-	pci_write_config_word(dev, 0x04, 0x0007);	/* mem access */
-	pci_read_config_byte(dev, 0x7c, &temp);
-	pci_write_config_byte(dev, 0x7c, 0x80);	/* R/W lock control */
-	pci_write_config_byte(dev, 0x09, 0x01);	/* set as pci-pci bridge */
-	pci_write_config_byte(dev, 0x7c, temp);	/* restore pci bus debug control */
-	dev->class |= 0x1;
+	return PCIBIOS_SUCCESSFUL;
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
 #endif	/* CONFIG_PCI */
 
 /*
@@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void)
 		else
 			fsl_add_bridge(np, 0);
 	}
+	uses_fsl_uli_m1575 = 1;
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
 	printk("MPC8544 DS board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 343b76d..685b2fb 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -7,6 +7,7 @@ config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index e9eaa07..56b27ca 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void)
 }
 
 #ifdef CONFIG_PCI
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn);
 
-enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
-const unsigned char uli1575_irq_route_table[16] = {
-	0, 	/* 0: Reserved */
-	0x8, 	/* 1: 0b1000 */
-	0, 	/* 2: Reserved */
-	0x2,	/* 3: 0b0010 */
-	0x4,	/* 4: 0b0100 */
-	0x5, 	/* 5: 0b0101 */
-	0x7,	/* 6: 0b0111 */
-	0x6,	/* 7: 0b0110 */
-	0, 	/* 8: Reserved */
-	0x1,	/* 9: 0b0001 */
-	0x3,	/* 10: 0b0011 */
-	0x9,	/* 11: 0b1001 */
-	0xb,	/* 12: 0b1011 */
-	0, 	/* 13: Reserved */
-	0xd,	/* 14, 0b1101 */
-	0xf,	/* 15, 0b1111 */
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
-	struct of_irq oirq;
-	u32 laddr[3];
-	struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
-	if (!hosenode) return -EINVAL;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
-			laddr[0], slot, pin, oirq.specifier[0]);
-	return oirq.specifier[0];
-}
-
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	unsigned short temp;
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned char irq2pin[16], c;
-	unsigned long pirq_map_word = 0;
-	u32 irq;
-	int i;
-
-	/*
-	 * ULI1575 interrupts route setup
-	 */
-	memset(irq2pin, 0, 16); /* Initialize default value 0 */
-
-	/*
-	 * PIRQA -> PIRQD mapping read from OF-tree
-	 *
-	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
-	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
-	 */
-	for (i = 0; i < 4; i++){
-		irq = get_pci_irq_from_of(hose, 17, i + 1);
-		if (irq > 0 && irq < 16)
-			irq2pin[irq] = PIRQA + i;
-		else
-			printk(KERN_WARNING "ULI1575 device"
-			    "(slot %d, pin %d) irq %d is invalid.\n",
-			    17, i, irq);
-	}
-
-	/*
-	 * PIRQE -> PIRQF mapping set manually
-	 *
-	 * IRQ pin   IRQ#
-	 * PIRQE ---- 9
-	 * PIRQF ---- 10
-	 * PIRQG ---- 11
-	 * PIRQH ---- 12
-	 */
-	for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
-
-	/* Set IRQ-PIRQ Mapping to ULI1575 */
-	for (i = 0; i < 16; i++)
-		if (irq2pin[i])
-			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
-				<< ((irq2pin[i] - PIRQA) * 4);
-
-	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
-	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
-			pirq_map_word);
-	pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg) 				\
-	do { 								\
-		int irq; 						\
-		irq = get_pci_irq_from_of(hose, slot, pin); 		\
-		if (irq > 0 && irq < 16) 				\
-			pci_write_config_byte(dev, reg, irq2pin[irq]); 	\
-		else							\
-			printk(KERN_WARNING "ULI1575 device"		\
-			    "(slot %d, pin %d) irq %d is invalid.\n",	\
-			    slot, pin, irq);				\
-	} while(0)
-
-	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
-	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
-	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
-	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
-	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
-	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
-	/* USB 2.0 controller, slot 28, pin 4 */
-	irq = get_pci_irq_from_of(hose, 28, 4);
-	if (irq >= 0 && irq <=15)
-		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
-	/* Audio controller, slot 29, pin 1 */
-	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
-	/* Modem controller, slot 29, pin 2 */
-	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
-	/* HD audio controller, slot 29, pin 3 */
-	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
-	/* SMB interrupt: slot 30, pin 1 */
-	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
-	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
-	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
-	/* Serial ATA interrupt: slot 31, pin 1 */
-	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
-	/* Primary PATA IDE IRQ: 14
-	 * Secondary PATA IDE IRQ: 15
-	 */
-	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
-	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
-	/* Set IRQ14 and IRQ15 to legacy IRQs */
-	pci_read_config_word(dev, 0x46, &temp);
-	temp |= 0xc000;
-	pci_write_config_word(dev, 0x46, temp);
-
-	/* Set i8259 interrupt trigger
-	 * IRQ 3:  Level
-	 * IRQ 4:  Level
-	 * IRQ 5:  Level
-	 * IRQ 6:  Level
-	 * IRQ 7:  Level
-	 * IRQ 9:  Level
-	 * IRQ 10: Level
-	 * IRQ 11: Level
-	 * IRQ 12: Level
-	 * IRQ 14: Edge
-	 * IRQ 15: Edge
-	 */
-	outb(0xfa, 0x4d0);
-	outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-
-	/* Disable the HD interface and enable the AC97 interface. */
-	pci_read_config_byte(dev, 0xb8, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0xb8, c);
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc86xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
 {
-	unsigned char c;
+	struct device_node* node;	
+	struct resource rsrc;
 
-	pci_read_config_byte(dev,0x83,&c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
+	node = (struct device_node *)hose->arch_data;
+	of_address_to_resource(node, 0, &rsrc);
 
-	pci_write_config_byte(dev, 0x09, 0x01);
-	pci_write_config_byte(dev, 0x0a, 0x06);
-
-	pci_read_config_byte(dev,0x83,&c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_read_config_byte(dev,0x84,&c);
-	c |= 0x01;
-	pci_write_config_byte(dev, 0x84, c);
-}
-
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned short temp;
-	pci_write_config_word(dev, 0x04, 0x0405);
-	dev->class &= ~0x5;
-	pci_read_config_word(dev, 0x4a, &temp);
-	temp |= 0x1000;
-	pci_write_config_word(dev, 0x4a, temp);
-}
+	if ((rsrc.start & 0xfffff) == 0x8000) {
+		return uli_exclude_device(hose, bus, devfn);
+	}
 
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
-	unsigned char temp;
-	pci_write_config_word(dev, 0x04, 0x0007);
-	pci_read_config_byte(dev, 0x7c, &temp);
-	pci_write_config_byte(dev, 0x7c, 0x80);
-	pci_write_config_byte(dev, 0x09, 0x01);
-	pci_write_config_byte(dev, 0x7c, temp);
-	dev->class |= 0x1;
+	return PCIBIOS_SUCCESSFUL;
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
 #endif /* CONFIG_PCI */
 
 
@@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void)
 		else
 			fsl_add_bridge(np, 0);
 	}
+	uses_fsl_uli_m1575 = 1;
+	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 2c937fb..041df77 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -283,4 +283,12 @@ config AXON_RAM
 	  minor numbers are available in /proc/devices, /proc/partitions or
 	  in /sys/block/axonram?/dev.
 
+config FSL_ULI1575
+	bool
+	default n
+	help
+	  Supports for the ULI1575 PCIe south bridge that exists on some
+	  Freescale reference boards. The boards all use the ULI in pretty
+	  much the same way.
+
 endmenu
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index d6e041a..d44e832 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,3 +1,6 @@
+
+obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
+
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
 else
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
index 17d5971..b24025f 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.h
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -113,10 +113,14 @@ struct cbe_pmd_regs {
 	u64	checkstop_fir;					/* 0x0c00 */
 	u64	recoverable_fir;				/* 0x0c08 */
 	u64	spec_att_mchk_fir;				/* 0x0c10 */
-	u64	fir_mode_reg;					/* 0x0c18 */
+	u32	fir_mode_reg;					/* 0x0c18 */
+	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8		0x00800
 	u64	fir_enable_mask;				/* 0x0c20 */
 
-	u8	pad_0x0c28_0x1000 [0x1000 - 0x0c28];		/* 0x0c28 */
+	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
+	u64	ras_esc_0;					/* 0x0ca8 */
+	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
 };
 
 extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index e4132f8..fb5eda4 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -88,17 +88,13 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
 /* returns the value for a given spu in a given register */
 static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
 {
-	const unsigned int *id;
 	union spe_reg value;
 	struct spu *spu;
 
-	/* getting the id from the reg attribute will not work on future device-tree layouts
-	 * in future we should store the id to the spu struct and use it here */
 	spu = container_of(sysdev, struct spu, sysdev);
-	id = of_get_property(spu_devnode(spu), "reg", NULL);
 	value.val = in_be64(&reg->val);
 
-	return value.spe[*id];
+	return value.spe[spu->spe_id];
 }
 
 static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 812bf56..4ede22d 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,6 +38,8 @@
 #include "pervasive.h"
 #include "cbe_regs.h"
 
+static int sysreset_hack;
+
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -85,6 +87,9 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
+	int cpu;
+	struct cbe_pmd_regs __iomem *pmd;
+
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -93,6 +98,18 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
+		/*
+		 * The BMC can inject user triggered system reset exceptions,
+		 * but cannot set the system reset reason in srr1,
+		 * so check an extra register here.
+		 */
+		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
+			pmd = cbe_get_cpu_pmd_regs(cpu);
+			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
+				out_be64(&pmd->ras_esc_0, 0);
+				return 0;
+			}
+		}
 		break;
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
@@ -113,9 +130,12 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 void __init cbe_pervasive_init(void)
 {
 	int cpu;
+
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -124,6 +144,12 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
+
+		/* Enable JTAG system-reset hack */
+		if (sysreset_hack)
+			out_be32(&regs->fir_mode_reg,
+				in_be32(&regs->fir_mode_reg) |
+				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 5eb8834..7c0668a 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -48,7 +48,7 @@ static u64 __init find_spu_unit_number(struct device_node *spe)
 {
 	const unsigned int *prop;
 	int proplen;
-	prop = of_get_property(spe, "unit-id", &proplen);
+	prop = of_get_property(spe, "physical-id", &proplen);
 	if (proplen == 4)
 		return (u64)*prop;
 
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
new file mode 100644
index 0000000..afc9141
--- /dev/null
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -0,0 +1,255 @@
+/*
+ * ULI M1575 setup code - specific to Freescale boards
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+
+#define ULI_PIRQA	0x08
+#define ULI_PIRQB	0x09
+#define ULI_PIRQC	0x0a
+#define ULI_PIRQD	0x0b
+#define ULI_PIRQE	0x0c
+#define ULI_PIRQF	0x0d
+#define ULI_PIRQG	0x0e
+
+#define ULI_8259_NONE	0x00
+#define ULI_8259_IRQ1	0x08
+#define ULI_8259_IRQ3	0x02
+#define ULI_8259_IRQ4	0x04
+#define ULI_8259_IRQ5	0x05
+#define ULI_8259_IRQ6	0x07
+#define ULI_8259_IRQ7	0x06
+#define ULI_8259_IRQ9	0x01
+#define ULI_8259_IRQ10	0x03
+#define ULI_8259_IRQ11	0x09
+#define ULI_8259_IRQ12	0x0b
+#define ULI_8259_IRQ14	0x0d
+#define ULI_8259_IRQ15	0x0f
+
+u8 uli_pirq_to_irq[8] = {
+	ULI_8259_IRQ9,		/* PIRQA */
+	ULI_8259_IRQ10,		/* PIRQB */
+	ULI_8259_IRQ11,		/* PIRQC */
+	ULI_8259_IRQ12,		/* PIRQD */
+	ULI_8259_IRQ5,		/* PIRQE */
+	ULI_8259_IRQ6,		/* PIRQF */
+	ULI_8259_IRQ7,		/* PIRQG */
+	ULI_8259_NONE,		/* PIRQH */
+};
+
+/* set in board code if you want this quirks to do something */
+int uses_fsl_uli_m1575;
+
+/* Bridge */
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+	unsigned char temp;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
+		 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	/* read/write lock */
+	pci_read_config_byte(dev, 0x7c, &temp);
+	pci_write_config_byte(dev, 0x7c, 0x80);
+
+	/* set as P2P bridge */
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	dev->class |= 0x1;
+
+	/* restore lock */
+	pci_write_config_byte(dev, 0x7c, temp);
+}
+
+
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+	int i;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	/*
+	 * ULI1575 interrupts route setup
+	 */
+
+	/* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */
+	for (i = 0; i < 4; i++) {
+		u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4);
+		pci_write_config_byte(dev, 0x48 + i, val);
+	}
+
+	/* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */
+	pci_write_config_byte(dev, 0x86, ULI_PIRQD);
+
+	/* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */
+	pci_write_config_byte(dev, 0x87, ULI_PIRQA);
+
+	/* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */
+	pci_write_config_byte(dev, 0x88, ULI_PIRQB);
+
+	/* Lan controller: dev 27, func 0 - IRQ6 */
+	pci_write_config_byte(dev, 0x89, ULI_PIRQF);
+
+	/* AC97 Audio controller: dev 29, func 0 - IRQ6 */
+	pci_write_config_byte(dev, 0x8a, ULI_PIRQF);
+
+	/* Modem controller: dev 29, func 1 - IRQ6 */
+	pci_write_config_byte(dev, 0x8b, ULI_PIRQF);
+
+	/* HD Audio controller: dev 29, func 2 - IRQ6 */
+	pci_write_config_byte(dev, 0x8c, ULI_PIRQF);
+
+	/* SATA controller: dev 31, func 1 - IRQ5 */
+	pci_write_config_byte(dev, 0x8d, ULI_PIRQE);
+
+	/* SMB interrupt: dev 30, func 1 - IRQ7 */
+	pci_write_config_byte(dev, 0x8e, ULI_PIRQG);
+
+	/* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */
+	pci_write_config_byte(dev, 0x8f, ULI_PIRQG);
+
+	/* USB 2.0 controller: dev 28, func 3 */
+	pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11);
+
+	/* Primary PATA IDE IRQ: 14
+	 * Secondary PATA IDE IRQ: 15
+	 */
+	pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14);
+	pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15);
+}
+
+static void __devinit quirk_final_uli1575(struct pci_dev *dev)
+{
+	/* Set i8259 interrupt trigger
+	 * IRQ 3:  Level
+	 * IRQ 4:  Level
+	 * IRQ 5:  Level
+	 * IRQ 6:  Level
+	 * IRQ 7:  Level
+	 * IRQ 9:  Level
+	 * IRQ 10: Level
+	 * IRQ 11: Level
+	 * IRQ 12: Level
+	 * IRQ 14: Edge
+	 * IRQ 15: Edge
+	 */
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	outb(0xfa, 0x4d0);
+	outb(0x1e, 0x4d1);
+
+	/* setup RTC */
+	CMOS_WRITE(RTC_SET, RTC_CONTROL);
+	CMOS_WRITE(RTC_24H, RTC_CONTROL);
+
+	/* ensure month, date, and week alarm fields are ignored */
+	CMOS_WRITE(0, RTC_VALID);
+
+	outb_p(0x7c, 0x72);
+	outb_p(RTC_ALARM_DONT_CARE, 0x73);
+
+	outb_p(0x7d, 0x72);
+	outb_p(RTC_ALARM_DONT_CARE, 0x73);
+}
+
+/* SATA */
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned int d;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	/* read/write lock */
+	pci_read_config_byte(dev, 0x83, &c);
+	pci_write_config_byte(dev, 0x83, c|0x80);
+
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &d);
+	d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8);
+	pci_write_config_dword(dev, PCI_CLASS_REVISION, d);
+
+	/* restore lock */
+	pci_write_config_byte(dev, 0x83, c);
+
+	/* disable emulated PATA mode enabled */
+	pci_read_config_byte(dev, 0x84, &c);
+	pci_write_config_byte(dev, 0x84, c & ~0x01);
+}
+
+/* PATA */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned short temp;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
+		PCI_COMMAND_MASTER | PCI_COMMAND_IO);
+
+	/* Enable Native IRQ 14/15 */
+	pci_read_config_word(dev, 0x4a, &temp);
+	pci_write_config_word(dev, 0x4a, temp | 0x1000);
+}
+
+/* We have to do a dummy read on the P2P for the RTC to work, WTF */
+static void __devinit quirk_final_uli5249(struct pci_dev *dev)
+{
+	int i;
+	u8 *dummy;
+	struct pci_bus *bus = dev->bus;
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+		if ((bus->resource[i]) &&
+			(bus->resource[i]->flags & IORESOURCE_MEM)) {
+			dummy = ioremap(bus->resource[i]->start, 0x4);
+			if (dummy) {
+				in_8(dummy);
+				iounmap(dummy);
+			}
+			break;
+		}
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+
+int uli_exclude_device(struct pci_controller *hose,
+			u_char bus, u_char devfn)
+{
+	if (bus == (hose->first_busno + 2)) {
+		/* exclude Modem controller */
+		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+		/* exclude HD Audio controller */
+		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index c910ec9..6c42787 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -93,7 +93,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 
 	pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr);
 
-	bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+	bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
 
 	ip = ((u32 *)tbl->it_base) + index;
 
@@ -118,7 +118,7 @@ static void iobmap_free(struct iommu_table *tbl, long index,
 
 	pr_debug("iobmap: free at: %lx, %lx\n", index, npages);
 
-	bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+	bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
 
 	ip = ((u32 *)tbl->it_base) + index;
 
@@ -137,7 +137,7 @@ static void iommu_table_iobmap_setup(void)
 	iommu_table_iobmap.it_busno = 0;
 	iommu_table_iobmap.it_offset = 0;
 	/* it_size is in number of entries */
-	iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT;
+	iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT;
 
 	/* Initialize the common IOMMU code */
 	iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 2326d5d..ab037a3 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -59,8 +59,7 @@
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
-	unsigned int		irq_correctable;
-	unsigned int		irq_uncorrectable;
+	unsigned int		irq_id;
 	unsigned long		ph_addr;
 	unsigned long		io_addr;
 	unsigned long		size;
@@ -93,16 +92,9 @@ axon_ram_irq_handler(int irq, void *dev)
 
 	BUG_ON(!bank);
 
-	if (irq == bank->irq_correctable) {
-		dev_err(&device->dev, "Correctable memory error occured\n");
-		bank->ecc_counter++;
-		return IRQ_HANDLED;
-	} else if (irq == bank->irq_uncorrectable) {
-		dev_err(&device->dev, "Uncorrectable memory error occured\n");
-		panic("Critical ECC error on %s", device->node->full_name);
-	}
-
-	return IRQ_NONE;
+	dev_err(&device->dev, "Correctable memory error occured\n");
+	bank->ecc_counter++;
+	return IRQ_HANDLED;
 }
 
 /**
@@ -259,28 +251,18 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 	blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
 	add_disk(bank->disk);
 
-	bank->irq_correctable = irq_of_parse_and_map(device->node, 0);
-	bank->irq_uncorrectable = irq_of_parse_and_map(device->node, 1);
-	if ((bank->irq_correctable <= 0) || (bank->irq_uncorrectable <= 0)) {
+	bank->irq_id = irq_of_parse_and_map(device->node, 0);
+	if (bank->irq_id == NO_IRQ) {
 		dev_err(&device->dev, "Cannot access ECC interrupt ID\n");
 		rc = -EFAULT;
 		goto failed;
 	}
 
-	rc = request_irq(bank->irq_correctable, axon_ram_irq_handler,
-			AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
-	if (rc != 0) {
-		dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
-		bank->irq_correctable = bank->irq_uncorrectable = 0;
-		rc = -EFAULT;
-		goto failed;
-	}
-
-	rc = request_irq(bank->irq_uncorrectable, axon_ram_irq_handler,
+	rc = request_irq(bank->irq_id, axon_ram_irq_handler,
 			AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
 	if (rc != 0) {
 		dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
-		bank->irq_uncorrectable = 0;
+		bank->irq_id = NO_IRQ;
 		rc = -EFAULT;
 		goto failed;
 	}
@@ -296,13 +278,9 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 
 failed:
 	if (bank != NULL) {
-		if (bank->irq_uncorrectable > 0)
-			free_irq(bank->irq_uncorrectable, device);
-		if (bank->irq_correctable > 0)
-			free_irq(bank->irq_correctable, device);
+		if (bank->irq_id != NO_IRQ)
+			free_irq(bank->irq_id, device);
 		if (bank->disk != NULL) {
-			if (bank->disk->queue != NULL)
-				blk_cleanup_queue(bank->disk->queue);
 			if (bank->disk->major > 0)
 				unregister_blkdev(bank->disk->major,
 						bank->disk->disk_name);
@@ -329,9 +307,7 @@ axon_ram_remove(struct of_device *device)
 	BUG_ON(!bank || !bank->disk);
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
-	free_irq(bank->irq_uncorrectable, device);
-	free_irq(bank->irq_correctable, device);
-	blk_cleanup_queue(bank->disk->queue);
+	free_irq(bank->irq_id, device);
 	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9fb0ce5..114c90f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 565f57d..f3abce1 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/fsl_devices.h>
 #include <linux/fs_enet_pd.h>
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index e276048..0c9ac7e 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -20,14 +20,16 @@ static int  __init add_rtc(void)
 {
 	struct device_node *np;
 	struct platform_device *pd;
-	struct resource res;
+	struct resource res[2];
 	int ret;
 
+	memset(&res, 0, sizeof(res));
+
 	np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00");
 	if (!np)
 		return -ENODEV;
 
-	ret = of_address_to_resource(np, 0, &res);
+	ret = of_address_to_resource(np, 0, &res[0]);
 	of_node_put(np);
 	if (ret)
 		return ret;
@@ -36,11 +38,18 @@ static int  __init add_rtc(void)
 	 * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h.  Verify that the
 	 * address provided by the device node matches.
 	 */
-	if (res.start != RTC_PORT(0))
+	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
+	/* Use a fixed interrupt value of 8 since on PPC if we are using this
+	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
+	res[1].start = 8;
+	res[1].end = 8;
+	res[1].flags = IORESOURCE_IRQ;
+
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res, 1);
+					     &res[0], 2);
+
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
 
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index ad4ca75..5245717 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -60,17 +60,28 @@ static void hypfs_add_dentry(struct dentry *dentry)
 	hypfs_last_dentry = dentry;
 }
 
+static inline int hypfs_positive(struct dentry *dentry)
+{
+	return dentry->d_inode && !d_unhashed(dentry);
+}
+
 static void hypfs_remove(struct dentry *dentry)
 {
 	struct dentry *parent;
 
 	parent = dentry->d_parent;
-	if (S_ISDIR(dentry->d_inode->i_mode))
-		simple_rmdir(parent->d_inode, dentry);
-	else
-		simple_unlink(parent->d_inode, dentry);
+	if (!parent || !parent->d_inode)
+		return;
+	mutex_lock(&parent->d_inode->i_mutex);
+	if (hypfs_positive(dentry)) {
+		if (S_ISDIR(dentry->d_inode->i_mode))
+			simple_rmdir(parent->d_inode, dentry);
+		else
+			simple_unlink(parent->d_inode, dentry);
+	}
 	d_delete(dentry);
 	dput(dentry);
+	mutex_unlock(&parent->d_inode->i_mutex);
 }
 
 static void hypfs_delete_tree(struct dentry *root)
@@ -315,6 +326,7 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 	}
 	hypfs_update_update(sb);
 	sb->s_root = root_dentry;
+	printk(KERN_INFO "hypfs: Hypervisor filesystem mounted\n");
 	return 0;
 
 err_tree:
@@ -356,13 +368,17 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 	qname.name = name;
 	qname.len = strlen(name);
 	qname.hash = full_name_hash(name, qname.len);
+	mutex_lock(&parent->d_inode->i_mutex);
 	dentry = lookup_one_len(name, parent, strlen(name));
-	if (IS_ERR(dentry))
-		return ERR_PTR(-ENOMEM);
+	if (IS_ERR(dentry)) {
+		dentry = ERR_PTR(-ENOMEM);
+		goto fail;
+	}
 	inode = hypfs_make_inode(sb, mode);
 	if (!inode) {
 		dput(dentry);
-		return ERR_PTR(-ENOMEM);
+		dentry = ERR_PTR(-ENOMEM);
+		goto fail;
 	}
 	if (mode & S_IFREG) {
 		inode->i_fop = &hypfs_file_ops;
@@ -379,6 +395,8 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 	inode->i_private = data;
 	d_instantiate(dentry, inode);
 	dget(dentry);
+fail:
+	mutex_unlock(&parent->d_inode->i_mutex);
 	return dentry;
 }
 
@@ -391,7 +409,6 @@ struct dentry *hypfs_mkdir(struct super_block *sb, struct dentry *parent,
 	if (IS_ERR(dentry))
 		return dentry;
 	hypfs_add_dentry(dentry);
-	parent->d_inode->i_nlink++;
 	return dentry;
 }
 
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 3195d37..56cb710 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -6,7 +6,7 @@ EXTRA_AFLAGS	:= -traditional
 
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
-	    semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o
+	    semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
new file mode 100644
index 0000000..c032d11
--- /dev/null
+++ b/arch/s390/kernel/diag.c
@@ -0,0 +1,102 @@
+/*
+ * Implementation of s390 diagnose codes
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#include <linux/module.h>
+#include <asm/diag.h>
+
+/*
+ * Diagnose 10: Release pages
+ */
+void diag10(unsigned long addr)
+{
+	if (addr >= 0x7ff00000)
+		return;
+	asm volatile(
+#ifdef CONFIG_64BIT
+		"	sam31\n"
+		"	diag	%0,%0,0x10\n"
+		"0:	sam64\n"
+#else
+		"	diag	%0,%0,0x10\n"
+		"0:\n"
+#endif
+		EX_TABLE(0b, 0b)
+		: : "a" (addr));
+}
+EXPORT_SYMBOL(diag10);
+
+/*
+ * Diagnose 14: Input spool file manipulation
+ */
+int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode)
+{
+	register unsigned long _ry1 asm("2") = ry1;
+	register unsigned long _ry2 asm("3") = subcode;
+	int rc = 0;
+
+	asm volatile(
+#ifdef CONFIG_64BIT
+		"   sam31\n"
+		"   diag    %2,2,0x14\n"
+		"   sam64\n"
+#else
+		"   diag    %2,2,0x14\n"
+#endif
+		"   ipm     %0\n"
+		"   srl     %0,28\n"
+		: "=d" (rc), "+d" (_ry2)
+		: "d" (rx), "d" (_ry1)
+		: "cc");
+
+	return rc;
+}
+EXPORT_SYMBOL(diag14);
+
+/*
+ * Diagnose 210: Get information about a virtual device
+ */
+int diag210(struct diag210 *addr)
+{
+	/*
+	 * diag 210 needs its data below the 2GB border, so we
+	 * use a static data area to be sure
+	 */
+	static struct diag210 diag210_tmp;
+	static DEFINE_SPINLOCK(diag210_lock);
+	unsigned long flags;
+	int ccode;
+
+	spin_lock_irqsave(&diag210_lock, flags);
+	diag210_tmp = *addr;
+
+#ifdef CONFIG_64BIT
+	asm volatile(
+		"	lhi	%0,-1\n"
+		"	sam31\n"
+		"	diag	%1,0,0x210\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:	sam64\n"
+		EX_TABLE(0b, 1b)
+		: "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
+#else
+	asm volatile(
+		"	lhi	%0,-1\n"
+		"	diag	%1,0,0x210\n"
+		"0:	ipm	%0\n"
+		"	srl	%0,28\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
+#endif
+
+	*addr = diag210_tmp;
+	spin_unlock_irqrestore(&diag210_lock, flags);
+
+	return ccode;
+}
+EXPORT_SYMBOL(diag210);
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d305731..50d2235 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -577,7 +577,7 @@ static struct insn opcode_b2[] = {
 	{ "esta", 0x4a, INSTR_RRE_RR },
 	{ "lura", 0x4b, INSTR_RRE_RR },
 	{ "tar", 0x4c, INSTR_RRE_AR },
-	{ "cpya", INSTR_RRE_AA },
+	{ "cpya", 0x4d, INSTR_RRE_AA },
 	{ "sar", 0x4e, INSTR_RRE_AR },
 	{ "ear", 0x4f, INSTR_RRE_RA },
 	{ "csp", 0x50, INSTR_RRE_RR },
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 358d2bb..e40373d 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -85,7 +85,7 @@ void __kprobes get_instruction_type(struct arch_specific_insn *ainsn)
 	ainsn->reg = (*ainsn->insn & 0xf0) >> 4;
 
 	/* save the instruction length (pop 5-5) in bytes */
-	switch (*(__u8 *) (ainsn->insn) >> 4) {
+	switch (*(__u8 *) (ainsn->insn) >> 6) {
 	case 0:
 		ainsn->ilen = 2;
 		break;
diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c
index 90b5ef5..7234c73 100644
--- a/arch/s390/kernel/s390_ksyms.c
+++ b/arch/s390/kernel/s390_ksyms.c
@@ -25,7 +25,6 @@ EXPORT_SYMBOL(_oi_bitmap);
 EXPORT_SYMBOL(_ni_bitmap);
 EXPORT_SYMBOL(_zb_findmap);
 EXPORT_SYMBOL(_sb_findmap);
-EXPORT_SYMBOL(diag10);
 
 /*
  * semaphore ops
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index c5b2f4f..fabc50a 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -20,6 +20,7 @@
 
 #include <asm/pgalloc.h>
 #include <asm/uaccess.h>
+#include <asm/diag.h>
 
 static char *sender = "VMRMSVM";
 module_param(sender, charp, 0400);
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 9098531..3a25bbf 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,23 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void diag10(unsigned long addr)
-{
-        if (addr >= 0x7ff00000)
-                return;
-	asm volatile(
-#ifdef CONFIG_64BIT
-		"	sam31\n"
-		"	diag	%0,%0,0x10\n"
-		"0:	sam64\n"
-#else
-		"	diag	%0,%0,0x10\n"
-		"0:\n"
-#endif
-		EX_TABLE(0b,0b)
-		: : "a" (addr));
-}
-
 void show_mem(void)
 {
 	int i, total = 0, reserved = 0;
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 3d211aa..97ac586 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -34,6 +34,8 @@ isa-y			:= $(isa-y)-nofpu
 endif
 endif
 
+isa-y			:= $(isa-y)-up
+
 cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
 cflags-$(CONFIG_CPU_SH2A)		+= $(call cc-option,-m2a,) \
 					   $(call cc-option,-m2a-nofpu,)
@@ -46,7 +48,20 @@ cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
-cflags-y	+= $(call as-option,-Wa$(comma)-isa=$(isa-y),) -ffreestanding
+#
+# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
+# support it, while -Wa,-dsp by itself limits the range of usable opcodes
+# on certain CPU subtypes. Try the ISA variant first, and if that fails,
+# fall back on -Wa,-dsp for the old binutils versions. Even without DSP
+# opcodes, we always want the best ISA tuning the version of binutils
+# will provide.
+#
+isaflags-y	:= $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
+isaflags-$(CONFIG_SH_DSP)		:= \
+	$(call as-option,-Wa$(comma)-isa=$(isa-y),-Wa$(comma)-dsp)
+
+cflags-y	+= $(isaflags-y) -ffreestanding
 
 cflags-$(CONFIG_MORE_COMPILE_OPTIONS)	+= \
 	$(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 6e4e965..dab1932 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -41,3 +41,8 @@ static int __init sh4202_devices_setup(void)
 				    ARRAY_SIZE(sh4202_devices));
 }
 __initcall(sh4202_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	/* do nothing - all IRL interrupts are handled by the board code */
+}
diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c
index 9833493..80b637c 100644
--- a/arch/sh/kernel/early_printk.c
+++ b/arch/sh/kernel/early_printk.c
@@ -76,7 +76,7 @@ static void scif_sercon_putc(int c)
 	sci_in(&scif_port, SCxSR);
 	sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40));
 
-	while ((sci_in(&scif_port, SCxSR) & 0x40) == 0);
+	while ((sci_in(&scif_port, SCxSR) & 0x40) == 0)
 		;
 
 	if (c == '\n')
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 23c5948..129b2cf 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -91,6 +91,13 @@ void __init sh_mv_setup(void)
 				(unsigned long)&__machvec_start);
 
 		/*
+		 * Sanity check for machvec section alignment. Ensure
+		 * __initmv hasn't been misused.
+		 */
+		if (machvec_size % sizeof(struct sh_machine_vector))
+			panic("machvec misaligned, invalid __initmv use?");
+
+		/*
 		 * If the machvec hasn't been preselected, use the first
 		 * vector (usually the only one) from .machvec.init.
 		 */
diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace.c
index 891d1d4..f64a2d2 100644
--- a/arch/sh/kernel/ptrace.c
+++ b/arch/sh/kernel/ptrace.c
@@ -93,6 +93,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	case PTRACE_PEEKTEXT: /* read word at location addr. */
 	case PTRACE_PEEKDATA:
 		ret = generic_ptrace_peekdata(child, addr, data);
+		break;
 
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
diff --git a/arch/sh64/kernel/setup.c b/arch/sh64/kernel/setup.c
index 53e9d20..2b7264c 100644
--- a/arch/sh64/kernel/setup.c
+++ b/arch/sh64/kernel/setup.c
@@ -59,10 +59,6 @@
 #include <asm/setup.h>
 #include <asm/smp.h>
 
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#endif
-
 struct screen_info screen_info;
 
 #ifdef CONFIG_BLK_DEV_RAM
diff --git a/arch/sh64/kernel/signal.c b/arch/sh64/kernel/signal.c
index 0bb4a8f..79fc48c 100644
--- a/arch/sh64/kernel/signal.c
+++ b/arch/sh64/kernel/signal.c
@@ -25,7 +25,6 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
-#include <linux/personality.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index ac352eb..e2d02fd 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -238,6 +238,7 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d
 	sd = &dev->ofdev.dev.archdata;
 	sd->prom_node = dp;
 	sd->op = &dev->ofdev;
+	sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu;
 
 	dev->ofdev.node = dp;
 	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 9ddc5b9..76effdb 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -8,6 +8,7 @@ lib-y := mul.o rem.o sdiv.o udiv.o umul.o urem.o ashrdi3.o memcpy.o memset.o \
          strlen.o checksum.o blockops.o memscan.o memcmp.o strncmp.o \
 	 strncpy_from_user.o divdi3.o udivdi3.o strlen_user.o \
 	 copy_user.o locks.o atomic.o \
-	 lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o
+	 lshrdi3.o ashldi3.o rwsem.o muldi3.o bitext.o \
+	 cmpdi2.o
 
 obj-y += iomap.o atomic32.o
diff --git a/arch/sparc/lib/cmpdi2.c b/arch/sparc/lib/cmpdi2.c
new file mode 100644
index 0000000..8c13064
--- /dev/null
+++ b/arch/sparc/lib/cmpdi2.c
@@ -0,0 +1,27 @@
+#include <linux/module.h>
+
+#include "libgcc.h"
+
+word_type __cmpdi2(long long a, long long b)
+{
+	const DWunion au = {
+		.ll = a
+	};
+	const DWunion bu = {
+		.ll = b
+	};
+
+	if (au.s.high < bu.s.high)
+		return 0;
+	else if (au.s.high > bu.s.high)
+		return 2;
+
+	if ((unsigned int) au.s.low < (unsigned int) bu.s.low)
+		return 0;
+	else if ((unsigned int) au.s.low > (unsigned int) bu.s.low)
+		return 2;
+
+	return 1;
+}
+
+EXPORT_SYMBOL(__cmpdi2);
diff --git a/arch/sparc/lib/libgcc.h b/arch/sparc/lib/libgcc.h
new file mode 100644
index 0000000..b84fd79
--- /dev/null
+++ b/arch/sparc/lib/libgcc.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_LIBGCC_H
+#define __ASM_LIBGCC_H
+
+#include <asm/byteorder.h>
+
+typedef int word_type __attribute__ ((mode (__word__)));
+
+struct DWstruct {
+	int high, low;
+};
+
+typedef union
+{
+	struct DWstruct s;
+	long long ll;
+} DWunion;
+
+#endif /* __ASM_LIBGCC_H */
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index 4ccda77..7c89893 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -66,7 +66,7 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus)
 	}
 	if(!xpt) panic("Cannot map External Page Table.");
 	
-	sbus->iommu = (struct iommu_struct *)iounit;
+	sbus->ofdev.dev.archdata.iommu = iounit;
 	iounit->page_table = xpt;
 	spin_lock_init(&iounit->lock);
 	
@@ -127,7 +127,7 @@ nexti:	scan = find_next_zero_bit(iounit->bmap, limit, scan);
 static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus *sbus)
 {
 	unsigned long ret, flags;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	
 	spin_lock_irqsave(&iounit->lock, flags);
 	ret = iounit_get_area(iounit, (unsigned long)vaddr, len);
@@ -138,7 +138,7 @@ static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus
 static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus)
 {
 	unsigned long flags;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
 	/* FIXME: Cache some resolved pages - often several sg entries are to the same page */
 	spin_lock_irqsave(&iounit->lock, flags);
@@ -153,7 +153,7 @@ static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus
 static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus)
 {
 	unsigned long flags;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	
 	spin_lock_irqsave(&iounit->lock, flags);
 	len = ((vaddr & ~PAGE_MASK) + len + (PAGE_SIZE-1)) >> PAGE_SHIFT;
@@ -168,7 +168,7 @@ static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_
 {
 	unsigned long flags;
 	unsigned long vaddr, len;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
 	spin_lock_irqsave(&iounit->lock, flags);
 	while (sz != 0) {
@@ -211,7 +211,7 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in
 			i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT);
 
 			for_each_sbus(sbus) {
-				struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+				struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
 				iopte = (iopte_t *)(iounit->page_table + i);
 				*iopte = MKIOPTE(__pa(page));
@@ -235,7 +235,7 @@ static void iounit_unmap_dma_area(unsigned long addr, int len)
 static struct page *iounit_translate_dvma(unsigned long addr)
 {
 	struct sbus_bus *sbus = sbus_root;	/* They are all the same */
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	int i;
 	iopte_t *iopte;
 
@@ -279,7 +279,7 @@ __u32 iounit_map_dma_init(struct sbus_bus *sbus, int size)
 	unsigned long rotor, scan, limit;
 	unsigned long flags;
 	__u32 ret;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 
         npages = (size + (PAGE_SIZE-1)) >> PAGE_SHIFT;
 	i = 0x0213;
@@ -315,7 +315,7 @@ nexti:	scan = find_next_zero_bit(iounit->bmap, limit, scan);
 __u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus)
 {
 	int scan = (vaddr - IOUNIT_DMA_BASE) >> PAGE_SHIFT;
-	struct iounit_struct *iounit = (struct iounit_struct *)sbus->iommu;
+	struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu;
 	
 	iounit->page_table[scan] = MKIOPTE(__pa(((unsigned long)addr) & PAGE_MASK));
 	return vaddr + (((unsigned long)addr) & ~PAGE_MASK);
diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c
index be042ef..52e907a 100644
--- a/arch/sparc/mm/iommu.c
+++ b/arch/sparc/mm/iommu.c
@@ -132,7 +132,7 @@ iommu_init(int iommund, struct sbus_bus *sbus)
 	    impl, vers, iommu->page_table,
 	    (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES);
 
-	sbus->iommu = iommu;
+	sbus->ofdev.dev.archdata.iommu = iommu;
 }
 
 /* This begs to be btfixup-ed by srmmu. */
@@ -166,7 +166,7 @@ static void iommu_flush_iotlb(iopte_t *iopte, unsigned int niopte)
 
 static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus)
 {
-	struct iommu_struct *iommu = sbus->iommu;
+	struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu;
 	int ioptex;
 	iopte_t *iopte, *iopte0;
 	unsigned int busa, busa0;
@@ -291,7 +291,7 @@ static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbu
 
 static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus)
 {
-	struct iommu_struct *iommu = sbus->iommu;
+	struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu;
 	int ioptex;
 	int i;
 
@@ -334,7 +334,7 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va,
     unsigned long addr, int len)
 {
 	unsigned long page, end;
-	struct iommu_struct *iommu = sbus_root->iommu;
+	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
 	iopte_t *iopte = iommu->page_table;
 	iopte_t *first;
 	int ioptex;
@@ -399,7 +399,7 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va,
 
 static void iommu_unmap_dma_area(unsigned long busa, int len)
 {
-	struct iommu_struct *iommu = sbus_root->iommu;
+	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
 	iopte_t *iopte = iommu->page_table;
 	unsigned long end;
 	int ioptex = (busa - iommu->start) >> PAGE_SHIFT;
@@ -420,7 +420,7 @@ static void iommu_unmap_dma_area(unsigned long busa, int len)
 
 static struct page *iommu_translate_dvma(unsigned long busa)
 {
-	struct iommu_struct *iommu = sbus_root->iommu;
+	struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu;
 	iopte_t *iopte = iommu->page_table;
 
 	iopte += ((busa - iommu->start) >> PAGE_SHIFT);
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 79d60d8..005a3e7 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -268,7 +268,6 @@ static inline void sun4c_init_clean_mmu(unsigned long kernel_end)
 	unsigned char savectx, ctx;
 
 	savectx = sun4c_get_context();
-	kernel_end = SUN4C_REAL_PGDIR_ALIGN(kernel_end);
 	for (ctx = 0; ctx < num_contexts; ctx++) {
 		sun4c_set_context(ctx);
 		for (vaddr = 0; vaddr < 0x20000000; vaddr += SUN4C_REAL_PGDIR_SIZE)
@@ -2064,7 +2063,6 @@ void __init sun4c_paging_init(void)
 	unsigned long end_pfn, pages_avail;
 
 	kernel_end = (unsigned long) &end;
-	kernel_end += (SUN4C_REAL_PGDIR_SIZE * 4);
 	kernel_end = SUN4C_REAL_PGDIR_ALIGN(kernel_end);
 
 	pages_avail = 0;
diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c
index 8d1cfb0..2a007a7 100644
--- a/arch/sparc/prom/console.c
+++ b/arch/sparc/prom/console.c
@@ -17,9 +17,6 @@
 
 extern void restore_current(void);
 
-static char con_name_jmc[] = "/obio/su@"; /* "/obio/su@0,3002f8"; */
-#define CON_SIZE_JMC	(sizeof(con_name_jmc))
-
 /* Non blocking get character from console input device, returns -1
  * if no input was taken.  This can be used for polling.
  */
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index ac18bd8..63144ad 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -501,7 +501,7 @@ niagara_tlb_fixup:
 	cmp	%g1, SUN4V_CHIP_NIAGARA1
 	be,pt	%xcc, niagara_patch
 	 cmp	%g1, SUN4V_CHIP_NIAGARA2
-	be,pt	%xcc, niagara_patch
+	be,pt	%xcc, niagara2_patch
 	 nop
 
 	call	generic_patch_copyops
@@ -512,6 +512,15 @@ niagara_tlb_fixup:
 	 nop
 
 	ba,a,pt	%xcc, 80f
+niagara2_patch:
+	call	niagara2_patch_copyops
+	 nop
+	call	niagara_patch_bzero
+	 nop
+	call	niagara2_patch_pageops
+	 nop
+
+	ba,a,pt	%xcc, 80f
 
 niagara_patch:
 	call	niagara_patch_copyops
@@ -706,12 +715,13 @@ setup_trap_table:
 
 	membar	#Sync
 
+	BRANCH_IF_SUN4V(o2, 1f)
+
 	/* Kill PROM timer */
 	sethi	%hi(0x80000000), %o2
 	sllx	%o2, 32, %o2
 	wr	%o2, 0, %tick_cmpr
 
-	BRANCH_IF_SUN4V(o2, 1f)
 	BRANCH_IF_ANY_CHEETAH(o2, o3, 1f)
 
 	ba,pt	%xcc, 2f
diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c
index 95059c2..9f22e4f 100644
--- a/arch/sparc64/kernel/mdesc.c
+++ b/arch/sparc64/kernel/mdesc.c
@@ -9,6 +9,7 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
+#include <linux/miscdevice.h>
 
 #include <asm/hypervisor.h>
 #include <asm/mdesc.h>
@@ -836,6 +837,43 @@ void __devinit mdesc_fill_in_cpu_data(cpumask_t mask)
 	mdesc_release(hp);
 }
 
+static ssize_t mdesc_read(struct file *file, char __user *buf,
+			  size_t len, loff_t *offp)
+{
+	struct mdesc_handle *hp = mdesc_grab();
+	int err;
+
+	if (!hp)
+		return -ENODEV;
+
+	err = hp->handle_size;
+	if (len < hp->handle_size)
+		err = -EMSGSIZE;
+	else if (copy_to_user(buf, &hp->mdesc, hp->handle_size))
+		err = -EFAULT;
+	mdesc_release(hp);
+
+	return err;
+}
+
+static const struct file_operations mdesc_fops = {
+	.read	= mdesc_read,
+	.owner	= THIS_MODULE,
+};
+
+static struct miscdevice mdesc_misc = {
+	.minor	= MISC_DYNAMIC_MINOR,
+	.name	= "mdesc",
+	.fops	= &mdesc_fops,
+};
+
+static int __init mdesc_misc_init(void)
+{
+	return misc_register(&mdesc_misc);
+}
+
+__initcall(mdesc_misc_init);
+
 void __init sun4v_mdesc_init(void)
 {
 	struct mdesc_handle *hp;
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 9448595..9533a25 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -95,14 +95,13 @@ spitfire_startup:
 	membar		#Sync
 
 startup_continue:
+	mov		%o0, %l0
+	BRANCH_IF_SUN4V(g1, niagara_lock_tlb)
+
 	sethi		%hi(0x80000000), %g2
 	sllx		%g2, 32, %g2
 	wr		%g2, 0, %tick_cmpr
 
-	mov		%o0, %l0
-
-	BRANCH_IF_SUN4V(g1, niagara_lock_tlb)
-
 	/* Call OBP by hand to lock KERNBASE into i/d tlbs.
 	 * We lock 2 consequetive entries if we are 'bigkernel'.
 	 */
diff --git a/arch/sparc64/lib/Makefile b/arch/sparc64/lib/Makefile
index f95fbfa..f095e13 100644
--- a/arch/sparc64/lib/Makefile
+++ b/arch/sparc64/lib/Makefile
@@ -13,6 +13,8 @@ lib-y := PeeCeeI.o copy_page.o clear_page.o strlen.o strncmp.o \
 	 U3memcpy.o U3copy_from_user.o U3copy_to_user.o U3patch.o \
 	 NGmemcpy.o NGcopy_from_user.o NGcopy_to_user.o NGpatch.o \
 	 NGpage.o NGbzero.o \
+	 NG2memcpy.o NG2copy_from_user.o NG2copy_to_user.o NG2patch.o \
+	 NG2page.o \
 	 GENmemcpy.o GENcopy_from_user.o GENcopy_to_user.o GENpatch.o \
 	 GENpage.o GENbzero.o \
 	 copy_in_user.o user_fixup.o memmove.o \
diff --git a/arch/sparc64/lib/NG2copy_from_user.S b/arch/sparc64/lib/NG2copy_from_user.S
new file mode 100644
index 0000000..c77ef5f
--- /dev/null
+++ b/arch/sparc64/lib/NG2copy_from_user.S
@@ -0,0 +1,40 @@
+/* NG2copy_from_user.S: Niagara-2 optimized copy from userspace.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#define EX_LD(x)		\
+98:	x;			\
+	.section .fixup;	\
+	.align 4;		\
+99:	wr	%g0, ASI_AIUS, %asi;\
+	retl;			\
+	 mov	1, %o0;		\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, 99b;		\
+	.text;			\
+	.align 4;
+
+#ifndef ASI_AIUS
+#define ASI_AIUS	0x11
+#endif
+
+#ifndef ASI_BLK_AIUS_4V
+#define ASI_BLK_AIUS_4V	0x17
+#endif
+
+#define FUNC_NAME		NG2copy_from_user
+#define LOAD(type,addr,dest)	type##a [addr] %asi, dest
+#define LOAD_BLK(addr,dest)	ldda [addr] ASI_BLK_AIUS_4V, dest
+#define EX_RETVAL(x)		0
+
+#ifdef __KERNEL__
+#define PREAMBLE					\
+	rd		%asi, %g1;			\
+	cmp		%g1, ASI_AIUS;			\
+	bne,pn		%icc, memcpy_user_stub;		\
+	 nop
+#endif
+
+#include "NG2memcpy.S"
diff --git a/arch/sparc64/lib/NG2copy_to_user.S b/arch/sparc64/lib/NG2copy_to_user.S
new file mode 100644
index 0000000..4bd4093
--- /dev/null
+++ b/arch/sparc64/lib/NG2copy_to_user.S
@@ -0,0 +1,49 @@
+/* NG2copy_to_user.S: Niagara-2 optimized copy to userspace.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#define EX_ST(x)		\
+98:	x;			\
+	.section .fixup;	\
+	.align 4;		\
+99:	wr	%g0, ASI_AIUS, %asi;\
+	retl;			\
+	 mov	1, %o0;		\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, 99b;		\
+	.text;			\
+	.align 4;
+
+#ifndef ASI_AIUS
+#define ASI_AIUS	0x11
+#endif
+
+#ifndef ASI_BLK_AIUS_4V
+#define ASI_BLK_AIUS_4V	0x17
+#endif
+
+#ifndef ASI_BLK_INIT_QUAD_LDD_AIUS
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23
+#endif
+
+#define FUNC_NAME		NG2copy_to_user
+#define STORE(type,src,addr)	type##a src, [addr] ASI_AIUS
+#define STORE_ASI		ASI_BLK_INIT_QUAD_LDD_AIUS
+#define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_AIUS_4V
+#define EX_RETVAL(x)		0
+
+#ifdef __KERNEL__
+	/* Writing to %asi is _expensive_ so we hardcode it.
+	 * Reading %asi to check for KERNEL_DS is comparatively
+	 * cheap.
+	 */
+#define PREAMBLE					\
+	rd		%asi, %g1;			\
+	cmp		%g1, ASI_AIUS;			\
+	bne,pn		%icc, memcpy_user_stub;		\
+	 nop
+#endif
+
+#include "NG2memcpy.S"
diff --git a/arch/sparc64/lib/NG2memcpy.S b/arch/sparc64/lib/NG2memcpy.S
new file mode 100644
index 0000000..0aed756
--- /dev/null
+++ b/arch/sparc64/lib/NG2memcpy.S
@@ -0,0 +1,520 @@
+/* NG2memcpy.S: Niagara-2 optimized memcpy.
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef __KERNEL__
+#include <asm/visasm.h>
+#include <asm/asi.h>
+#define GLOBAL_SPARE	%g7
+#else
+#define ASI_PNF 0x82
+#define ASI_BLK_P 0xf0
+#define ASI_BLK_INIT_QUAD_LDD_P 0xe2
+#define FPRS_FEF  0x04
+#ifdef MEMCPY_DEBUG
+#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs; \
+		     clr %g1; clr %g2; clr %g3; subcc %g0, %g0, %g0;
+#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
+#else
+#define VISEntryHalf rd %fprs, %o5; wr %g0, FPRS_FEF, %fprs
+#define VISExitHalf and %o5, FPRS_FEF, %o5; wr %o5, 0x0, %fprs
+#endif
+#define GLOBAL_SPARE	%g5
+#endif
+
+#ifndef STORE_ASI
+#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA
+#define STORE_ASI	ASI_BLK_INIT_QUAD_LDD_P
+#else
+#define STORE_ASI	0x80		/* ASI_P */
+#endif
+#endif
+
+#ifndef EX_LD
+#define EX_LD(x)	x
+#endif
+
+#ifndef EX_ST
+#define EX_ST(x)	x
+#endif
+
+#ifndef EX_RETVAL
+#define EX_RETVAL(x)	x
+#endif
+
+#ifndef LOAD
+#define LOAD(type,addr,dest)	type [addr], dest
+#endif
+
+#ifndef LOAD_BLK
+#define LOAD_BLK(addr,dest)	ldda [addr] ASI_BLK_P, dest
+#endif
+
+#ifndef STORE
+#ifndef MEMCPY_DEBUG
+#define STORE(type,src,addr)	type src, [addr]
+#else
+#define STORE(type,src,addr)	type##a src, [addr] 0x80
+#endif
+#endif
+
+#ifndef STORE_BLK
+#define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_P
+#endif
+
+#ifndef STORE_INIT
+#define STORE_INIT(src,addr)	stxa src, [addr] STORE_ASI
+#endif
+
+#ifndef FUNC_NAME
+#define FUNC_NAME	NG2memcpy
+#endif
+
+#ifndef PREAMBLE
+#define PREAMBLE
+#endif
+
+#ifndef XCC
+#define XCC xcc
+#endif
+
+#define FREG_FROB(x0, x1, x2, x3, x4, x5, x6, x7, x8) \
+	faligndata	%x0, %x1, %f0; \
+	faligndata	%x1, %x2, %f2; \
+	faligndata	%x2, %x3, %f4; \
+	faligndata	%x3, %x4, %f6; \
+	faligndata	%x4, %x5, %f8; \
+	faligndata	%x5, %x6, %f10; \
+	faligndata	%x6, %x7, %f12; \
+	faligndata	%x7, %x8, %f14;
+
+#define FREG_MOVE_1(x0) \
+	fmovd		%x0, %f0;
+#define FREG_MOVE_2(x0, x1) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2;
+#define FREG_MOVE_3(x0, x1, x2) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4;
+#define FREG_MOVE_4(x0, x1, x2, x3) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4; \
+	fmovd		%x3, %f6;
+#define FREG_MOVE_5(x0, x1, x2, x3, x4) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4; \
+	fmovd		%x3, %f6; \
+	fmovd		%x4, %f8;
+#define FREG_MOVE_6(x0, x1, x2, x3, x4, x5) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4; \
+	fmovd		%x3, %f6; \
+	fmovd		%x4, %f8; \
+	fmovd		%x5, %f10;
+#define FREG_MOVE_7(x0, x1, x2, x3, x4, x5, x6) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4; \
+	fmovd		%x3, %f6; \
+	fmovd		%x4, %f8; \
+	fmovd		%x5, %f10; \
+	fmovd		%x6, %f12;
+#define FREG_MOVE_8(x0, x1, x2, x3, x4, x5, x6, x7) \
+	fmovd		%x0, %f0; \
+	fmovd		%x1, %f2; \
+	fmovd		%x2, %f4; \
+	fmovd		%x3, %f6; \
+	fmovd		%x4, %f8; \
+	fmovd		%x5, %f10; \
+	fmovd		%x6, %f12; \
+	fmovd		%x7, %f14;
+#define FREG_LOAD_1(base, x0) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0))
+#define FREG_LOAD_2(base, x0, x1) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1));
+#define FREG_LOAD_3(base, x0, x1, x2) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD(LOAD(ldd, base + 0x10, %x2));
+#define FREG_LOAD_4(base, x0, x1, x2, x3) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD(LOAD(ldd, base + 0x18, %x3));
+#define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD(LOAD(ldd, base + 0x20, %x4));
+#define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD(LOAD(ldd, base + 0x28, %x5));
+#define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \
+	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD(LOAD(ldd, base + 0x28, %x5)); \
+	EX_LD(LOAD(ldd, base + 0x30, %x6));
+
+	.register	%g2,#scratch
+	.register	%g3,#scratch
+
+	.text
+	.align		64
+
+	.globl	FUNC_NAME
+	.type	FUNC_NAME,#function
+FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
+	srlx		%o2, 31, %g2
+	cmp		%g2, 0
+	tne		%xcc, 5
+	PREAMBLE
+	mov		%o0, GLOBAL_SPARE
+	cmp		%o2, 0
+	be,pn		%XCC, 85f
+	 or		%o0, %o1, %o3
+	cmp		%o2, 16
+	blu,a,pn	%XCC, 80f
+	 or		%o3, %o2, %o3
+
+	/* 2 blocks (128 bytes) is the minimum we can do the block
+	 * copy with.  We need to ensure that we'll iterate at least
+	 * once in the block copy loop.  At worst we'll need to align
+	 * the destination to a 64-byte boundary which can chew up
+	 * to (64 - 1) bytes from the length before we perform the
+	 * block copy loop.
+	 *
+	 * However, the cut-off point, performance wise, is around
+	 * 4 64-byte blocks.
+	 */
+	cmp		%o2, (4 * 64)
+	blu,pt		%XCC, 75f
+	 andcc		%o3, 0x7, %g0
+
+	/* %o0:	dst
+	 * %o1:	src
+	 * %o2:	len  (known to be >= 128)
+	 *
+	 * The block copy loops can use %o4, %g2, %g3 as
+	 * temporaries while copying the data.  %o5 must
+	 * be preserved between VISEntryHalf and VISExitHalf
+	 */
+
+	LOAD(prefetch, %o1 + 0x000, #one_read)
+	LOAD(prefetch, %o1 + 0x040, #one_read)
+	LOAD(prefetch, %o1 + 0x080, #one_read)
+
+	/* Align destination on 64-byte boundary.  */
+	andcc		%o0, (64 - 1), %o4
+	be,pt		%XCC, 2f
+	 sub		%o4, 64, %o4
+	sub		%g0, %o4, %o4	! bytes to align dst
+	sub		%o2, %o4, %o2
+1:	subcc		%o4, 1, %o4
+	EX_LD(LOAD(ldub, %o1, %g1))
+	EX_ST(STORE(stb, %g1, %o0))
+	add		%o1, 1, %o1
+	bne,pt		%XCC, 1b
+	add		%o0, 1, %o0
+
+2:
+	/* Clobbers o5/g1/g2/g3/g7/icc/xcc.  We must preserve
+	 * o5 from here until we hit VISExitHalf.
+	 */
+	VISEntryHalf
+
+	alignaddr	%o1, %g0, %g0
+
+	add		%o1, (64 - 1), %o4
+	andn		%o4, (64 - 1), %o4
+	andn		%o2, (64 - 1), %g1
+	sub		%o2, %g1, %o2
+
+	and		%o1, (64 - 1), %g2
+	add		%o1, %g1, %o1
+	sub		%o0, %o4, %g3
+	brz,pt		%g2, 190f
+	 cmp		%g2, 32
+	blu,a		5f
+	 cmp		%g2, 16
+	cmp		%g2, 48
+	blu,a		4f
+	 cmp		%g2, 40
+	cmp		%g2, 56
+	blu		170f
+	 nop
+	ba,a,pt		%xcc, 180f
+
+4:	/* 32 <= low bits < 48 */
+	blu		150f
+	 nop
+	ba,a,pt		%xcc, 160f
+5:	/* 0 < low bits < 32 */
+	blu,a		6f
+	 cmp		%g2, 8
+	cmp		%g2, 24
+	blu		130f
+	 nop
+	ba,a,pt		%xcc, 140f
+6:	/* 0 < low bits < 16 */
+	bgeu		120f
+	 nop
+	/* fall through for 0 < low bits < 8 */
+110:	sub		%o4, 64, %g2
+	EX_LD(LOAD_BLK(%g2, %f0))
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+120:	sub		%o4, 56, %g2
+	FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+130:	sub		%o4, 48, %g2
+	FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_6(f20, f22, f24, f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+140:	sub		%o4, 40, %g2
+	FREG_LOAD_5(%g2, f0, f2, f4, f6, f8)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_5(f22, f24, f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+150:	sub		%o4, 32, %g2
+	FREG_LOAD_4(%g2, f0, f2, f4, f6)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_4(f24, f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+160:	sub		%o4, 24, %g2
+	FREG_LOAD_3(%g2, f0, f2, f4)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_3(f26, f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+170:	sub		%o4, 16, %g2
+	FREG_LOAD_2(%g2, f0, f2)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_2(f28, f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+180:	sub		%o4, 8, %g2
+	FREG_LOAD_1(%g2, f0)
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD(LOAD_BLK(%o4, %f16))
+	FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30)
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	FREG_MOVE_1(f30)
+	subcc		%g1, 64, %g1
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+	ba,pt		%xcc, 195f
+	 nop
+
+190:
+1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+	subcc		%g1, 64, %g1
+	EX_LD(LOAD_BLK(%o4, %f0))
+	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	add		%o4, 64, %o4
+	bne,pt		%xcc, 1b
+	 LOAD(prefetch, %o4 + 64, #one_read)
+
+195:
+	add		%o4, %g3, %o0
+	membar		#Sync
+
+	VISExitHalf
+
+	/* %o2 contains any final bytes still needed to be copied
+	 * over. If anything is left, we copy it one byte at a time.
+	 */
+	brz,pt		%o2, 85f
+	 sub		%o0, %o1, %o3
+	ba,a,pt		%XCC, 90f
+
+	.align		64
+75: /* 16 < len <= 64 */
+	bne,pn		%XCC, 75f
+	 sub		%o0, %o1, %o3
+
+72:
+	andn		%o2, 0xf, %o4
+	and		%o2, 0xf, %o2
+1:	subcc		%o4, 0x10, %o4
+	EX_LD(LOAD(ldx, %o1, %o5))
+	add		%o1, 0x08, %o1
+	EX_LD(LOAD(ldx, %o1, %g1))
+	sub		%o1, 0x08, %o1
+	EX_ST(STORE(stx, %o5, %o1 + %o3))
+	add		%o1, 0x8, %o1
+	EX_ST(STORE(stx, %g1, %o1 + %o3))
+	bgu,pt		%XCC, 1b
+	 add		%o1, 0x8, %o1
+73:	andcc		%o2, 0x8, %g0
+	be,pt		%XCC, 1f
+	 nop
+	sub		%o2, 0x8, %o2
+	EX_LD(LOAD(ldx, %o1, %o5))
+	EX_ST(STORE(stx, %o5, %o1 + %o3))
+	add		%o1, 0x8, %o1
+1:	andcc		%o2, 0x4, %g0
+	be,pt		%XCC, 1f
+	 nop
+	sub		%o2, 0x4, %o2
+	EX_LD(LOAD(lduw, %o1, %o5))
+	EX_ST(STORE(stw, %o5, %o1 + %o3))
+	add		%o1, 0x4, %o1
+1:	cmp		%o2, 0
+	be,pt		%XCC, 85f
+	 nop
+	ba,pt		%xcc, 90f
+	 nop
+
+75:
+	andcc		%o0, 0x7, %g1
+	sub		%g1, 0x8, %g1
+	be,pn		%icc, 2f
+	 sub		%g0, %g1, %g1
+	sub		%o2, %g1, %o2
+
+1:	subcc		%g1, 1, %g1
+	EX_LD(LOAD(ldub, %o1, %o5))
+	EX_ST(STORE(stb, %o5, %o1 + %o3))
+	bgu,pt		%icc, 1b
+	 add		%o1, 1, %o1
+
+2:	add		%o1, %o3, %o0
+	andcc		%o1, 0x7, %g1
+	bne,pt		%icc, 8f
+	 sll		%g1, 3, %g1
+
+	cmp		%o2, 16
+	bgeu,pt		%icc, 72b
+	 nop
+	ba,a,pt		%xcc, 73b
+
+8:	mov		64, %o3
+	andn		%o1, 0x7, %o1
+	EX_LD(LOAD(ldx, %o1, %g2))
+	sub		%o3, %g1, %o3
+	andn		%o2, 0x7, %o4
+	sllx		%g2, %g1, %g2
+1:	add		%o1, 0x8, %o1
+	EX_LD(LOAD(ldx, %o1, %g3))
+	subcc		%o4, 0x8, %o4
+	srlx		%g3, %o3, %o5
+	or		%o5, %g2, %o5
+	EX_ST(STORE(stx, %o5, %o0))
+	add		%o0, 0x8, %o0
+	bgu,pt		%icc, 1b
+	 sllx		%g3, %g1, %g2
+
+	srl		%g1, 3, %g1
+	andcc		%o2, 0x7, %o2
+	be,pn		%icc, 85f
+	 add		%o1, %g1, %o1
+	ba,pt		%xcc, 90f
+	 sub		%o0, %o1, %o3
+
+	.align		64
+80: /* 0 < len <= 16 */
+	andcc		%o3, 0x3, %g0
+	bne,pn		%XCC, 90f
+	 sub		%o0, %o1, %o3
+
+1:
+	subcc		%o2, 4, %o2
+	EX_LD(LOAD(lduw, %o1, %g1))
+	EX_ST(STORE(stw, %g1, %o1 + %o3))
+	bgu,pt		%XCC, 1b
+	 add		%o1, 4, %o1
+
+85:	retl
+	 mov		EX_RETVAL(GLOBAL_SPARE), %o0
+
+	.align		32
+90:
+	subcc		%o2, 1, %o2
+	EX_LD(LOAD(ldub, %o1, %g1))
+	EX_ST(STORE(stb, %g1, %o1 + %o3))
+	bgu,pt		%XCC, 90b
+	 add		%o1, 1, %o1
+	retl
+	 mov		EX_RETVAL(GLOBAL_SPARE), %o0
+
+	.size		FUNC_NAME, .-FUNC_NAME
diff --git a/arch/sparc64/lib/NG2page.S b/arch/sparc64/lib/NG2page.S
new file mode 100644
index 0000000..73b6b7c
--- /dev/null
+++ b/arch/sparc64/lib/NG2page.S
@@ -0,0 +1,61 @@
+/* NG2page.S: Niagara-2 optimized clear and copy page.
+ *
+ * Copyright (C) 2007 (davem@davemloft.net)
+ */
+
+#include <asm/asi.h>
+#include <asm/page.h>
+#include <asm/visasm.h>
+
+	.text
+	.align	32
+
+	/* This is heavily simplified from the sun4u variants
+	 * because Niagara-2 does not have any D-cache aliasing issues.
+	 */
+NG2copy_user_page:	/* %o0=dest, %o1=src, %o2=vaddr */
+	prefetch	[%o1 + 0x00], #one_read
+	prefetch	[%o1 + 0x40], #one_read
+	VISEntryHalf
+	set		PAGE_SIZE, %g7
+	sub		%o0, %o1, %g3
+1:	stxa		%g0, [%o1 + %g3] ASI_BLK_INIT_QUAD_LDD_P
+	subcc		%g7, 64, %g7
+	ldda		[%o1] ASI_BLK_P, %f0
+	stda		%f0, [%o1 + %g3] ASI_BLK_P
+	add		%o1, 64, %o1
+	bne,pt		%xcc, 1b
+	 prefetch	[%o1 + 0x40], #one_read
+	membar		#Sync
+	VISExitHalf
+	retl
+	 nop
+
+#define BRANCH_ALWAYS	0x10680000
+#define NOP		0x01000000
+#define NG_DO_PATCH(OLD, NEW)	\
+	sethi	%hi(NEW), %g1; \
+	or	%g1, %lo(NEW), %g1; \
+	sethi	%hi(OLD), %g2; \
+	or	%g2, %lo(OLD), %g2; \
+	sub	%g1, %g2, %g1; \
+	sethi	%hi(BRANCH_ALWAYS), %g3; \
+	sll	%g1, 11, %g1; \
+	srl	%g1, 11 + 2, %g1; \
+	or	%g3, %lo(BRANCH_ALWAYS), %g3; \
+	or	%g3, %g1, %g3; \
+	stw	%g3, [%g2]; \
+	sethi	%hi(NOP), %g3; \
+	or	%g3, %lo(NOP), %g3; \
+	stw	%g3, [%g2 + 0x4]; \
+	flush	%g2;
+
+	.globl	niagara2_patch_pageops
+	.type	niagara2_patch_pageops,#function
+niagara2_patch_pageops:
+	NG_DO_PATCH(copy_user_page, NG2copy_user_page)
+	NG_DO_PATCH(_clear_page, NGclear_page)
+	NG_DO_PATCH(clear_user_page, NGclear_user_page)
+	retl
+	 nop
+	.size	niagara2_patch_pageops,.-niagara2_patch_pageops
diff --git a/arch/sparc64/lib/NG2patch.S b/arch/sparc64/lib/NG2patch.S
new file mode 100644
index 0000000..28c36f0
--- /dev/null
+++ b/arch/sparc64/lib/NG2patch.S
@@ -0,0 +1,33 @@
+/* NG2patch.S: Patch Ultra-I routines with Niagara-2 variant.
+ *
+ * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ */
+
+#define BRANCH_ALWAYS	0x10680000
+#define NOP		0x01000000
+#define NG_DO_PATCH(OLD, NEW)	\
+	sethi	%hi(NEW), %g1; \
+	or	%g1, %lo(NEW), %g1; \
+	sethi	%hi(OLD), %g2; \
+	or	%g2, %lo(OLD), %g2; \
+	sub	%g1, %g2, %g1; \
+	sethi	%hi(BRANCH_ALWAYS), %g3; \
+	sll	%g1, 11, %g1; \
+	srl	%g1, 11 + 2, %g1; \
+	or	%g3, %lo(BRANCH_ALWAYS), %g3; \
+	or	%g3, %g1, %g3; \
+	stw	%g3, [%g2]; \
+	sethi	%hi(NOP), %g3; \
+	or	%g3, %lo(NOP), %g3; \
+	stw	%g3, [%g2 + 0x4]; \
+	flush	%g2;
+
+	.globl	niagara2_patch_copyops
+	.type	niagara2_patch_copyops,#function
+niagara2_patch_copyops:
+	NG_DO_PATCH(memcpy, NG2memcpy)
+	NG_DO_PATCH(___copy_from_user, NG2copy_from_user)
+	NG_DO_PATCH(___copy_to_user, NG2copy_to_user)
+	retl
+	 nop
+	.size	niagara2_patch_copyops,.-niagara2_patch_copyops
diff --git a/arch/sparc64/lib/NGpage.S b/arch/sparc64/lib/NGpage.S
index 8ce3a0c..428920d 100644
--- a/arch/sparc64/lib/NGpage.S
+++ b/arch/sparc64/lib/NGpage.S
@@ -45,6 +45,7 @@ NGcopy_user_page:	/* %o0=dest, %o1=src, %o2=vaddr */
 	retl
 	 nop
 
+	.globl		NGclear_page, NGclear_user_page
 NGclear_page:		/* %o0=dest */
 NGclear_user_page:	/* %o0=dest, %o1=vaddr */
 	mov		8, %g1
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index aff661f..0eabe73 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -612,6 +612,8 @@ static int ubd_open_dev(struct ubd *ubd_dev)
 	ubd_dev->fd = fd;
 
 	if(ubd_dev->cow.file != NULL){
+		blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
+
 		err = -ENOMEM;
 		ubd_dev->cow.bitmap = (void *) vmalloc(ubd_dev->cow.bitmap_len);
 		if(ubd_dev->cow.bitmap == NULL){
@@ -712,8 +714,6 @@ static int ubd_add(int n, char **error_out)
 	ubd_dev->queue->queuedata = ubd_dev;
 
 	blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG);
-	if(ubd_dev->cow.file != NULL)
-		blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long));
 	err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]);
 	if(err){
 		*error_out = "Failed to register device";
diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile
index 128561d..b024e4a 100644
--- a/arch/x86_64/Makefile
+++ b/arch/x86_64/Makefile
@@ -57,8 +57,8 @@ cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,)
 cflags-y += -maccumulate-outgoing-args
 
 # do binutils support CFI?
-cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
-AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
+AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,)
 
 # is .cfi_signal_frame supported too?
 cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,)
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index e89abcd..b6167fe 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -345,8 +345,7 @@ NEXT_PAGE(level2_kernel_pgt)
 	/* 40MB kernel mapping. The kernel code cannot be bigger than that.
 	   When you change this change KERNEL_TEXT_SIZE in page.h too. */
 	/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
-	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL,
-		KERNEL_TEXT_SIZE/PMD_SIZE)
+	PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, KERNEL_TEXT_SIZE/PMD_SIZE)
 	/* Module mapping starts here */
 	.fill	(PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0
 
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index f57f8b9..966fa10 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -397,14 +397,12 @@ static void clear_IO_APIC (void)
 int skip_ioapic_setup;
 int ioapic_force;
 
-/* dummy parsing: see setup.c */
-
-static int __init disable_ioapic_setup(char *str)
+static int __init parse_noapic(char *str)
 {
-	skip_ioapic_setup = 1;
+	disable_ioapic_setup();
 	return 0;
 }
-early_param("noapic", disable_ioapic_setup);
+early_param("noapic", parse_noapic);
 
 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
 static int __init disable_timer_pin_setup(char *arg)
diff --git a/arch/x86_64/kernel/nmi.c b/arch/x86_64/kernel/nmi.c
index cb8ee9d..0ec6d2d 100644
--- a/arch/x86_64/kernel/nmi.c
+++ b/arch/x86_64/kernel/nmi.c
@@ -85,7 +85,7 @@ int __init check_nmi_watchdog (void)
 	int *counts;
 	int cpu;
 
-	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
+	if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) 
 		return 0;
 
 	if (!atomic_read(&nmi_active))
@@ -442,7 +442,7 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
 	if (!!old_state == !!nmi_watchdog_enabled)
 		return 0;
 
-	if (atomic_read(&nmi_active) < 0) {
+	if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) {
 		printk( KERN_WARNING "NMI watchdog is permanently disabled\n");
 		return -EIO;
 	}
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 05d745e..2971144 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -82,6 +82,10 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	if (dma_mask == 0)
 		dma_mask = DMA_32BIT_MASK;
 
+	/* Device not DMA able */
+	if (dev->dma_mask == NULL)
+		return NULL;
+
 	/* Don't invoke OOM killer */
 	gfp |= __GFP_NORETRY;