[ARM] Orion: remove code duplication in TS209 and TS409 setup files

Signed-off-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

5 files changed, 168 insertions, 239 deletions

diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index c333cd7..1d1f855 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -4,7 +4,7 @@ obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
-obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
-obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o
+obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 80b6232..a9cef97 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -29,6 +29,7 @@
 #include <asm/arch/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
 #define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
@@ -186,95 +187,6 @@ static int __init qnap_ts209_pci_init(void)
 subsys_initcall(qnap_ts209_pci_init);
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
-	.phy_addr	= 8,
-};
-
-static int __init parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = parse_hex_nibble(b[0]);
-	lo = parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
-	u_int8_t addr[6];
-	int i;
-
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
-
-	printk(KERN_INFO "ts209: found ethernet mac address ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-	memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
-
-	return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n".)
- */
-static void __init ts209_find_mac_addr(void)
-{
-	unsigned long addr;
-
-	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
-		char *nor_page;
-		int ret = 0;
-
-		nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
-		if (nor_page != NULL) {
-			ret = check_mac_addr(nor_page);
-			iounmap(nor_page);
-		}
-
-		if (ret == 0)
-			break;
-	}
-}
-
-/*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
 
@@ -356,31 +268,6 @@ static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
-/*
- * QNAP TS-[12]09 specific power off method via UART1-attached PIC
- */
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts209_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (19200,8n1) */
-	orion5x_write(UART1_REG(LCR), 0x83);
-	orion5x_write(UART1_REG(DLL), divisor & 0xff);
-	orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-	orion5x_write(UART1_REG(LCR), 0x03);
-	orion5x_write(UART1_REG(IER), 0x00);
-	orion5x_write(UART1_REG(FCR), 0x00);
-	orion5x_write(UART1_REG(MCR), 0x00);
-
-	/* send the power-off command 'A' to PIC */
-	orion5x_write(UART1_REG(TX), 'A');
-}
-
 static void __init qnap_ts209_init(void)
 {
 	/*
@@ -402,8 +289,10 @@ static void __init qnap_ts209_init(void)
 	 */
 	orion5x_ehci0_init();
 	orion5x_ehci1_init();
-	ts209_find_mac_addr();
-	orion5x_eth_init(&qnap_ts209_eth_data);
+	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+				 qnap_ts209_partitions[5].offset,
+				 qnap_ts209_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_sata_init(&qnap_ts209_sata_data);
 	orion5x_uart0_init();
@@ -425,8 +314,8 @@ static void __init qnap_ts209_init(void)
 		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-	/* register ts209 specific power-off method */
-	pm_power_off = qnap_ts209_power_off;
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 524e424..32f0ff0 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -27,6 +27,7 @@
 #include <asm/arch/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "tsx09-common.h"
 
 /*****************************************************************************
  * QNAP TS-409 Info
@@ -152,95 +153,6 @@ static int __init qnap_ts409_pci_init(void)
 subsys_initcall(qnap_ts409_pci_init);
 
 /*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data qnap_ts409_eth_data = {
-	.phy_addr	= 8,
-};
-
-static int __init parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = parse_hex_nibble(b[0]);
-	lo = parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
-static int __init check_mac_addr(const char *addr_str)
-{
-	u_int8_t addr[6];
-	int i;
-
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
-
-	printk(KERN_INFO "ts409: found ethernet mac address ");
-	for (i = 0; i < 6; i++)
-		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
-
-	memcpy(qnap_ts409_eth_data.mac_addr, addr, 6);
-
-	return 0;
-}
-
-/*
- * The 'NAS Config' flash partition has an ext2 filesystem which
- * contains a file that has the ethernet MAC address in plain text
- * (format "xx:xx:xx:xx:xx:xx\n").
- */
-static void __init ts409_find_mac_addr(void)
-{
-	unsigned long addr;
-
-	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
-		char *nor_page;
-		int ret = 0;
-
-		nor_page = ioremap(QNAP_TS409_NOR_BOOT_BASE + addr, 1024);
-		if (nor_page != NULL) {
-			ret = check_mac_addr(nor_page);
-			iounmap(nor_page);
-		}
-
-		if (ret == 0)
-			break;
-	}
-}
-
-/*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
 
@@ -307,32 +219,6 @@ static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
 	{ -1 },
 };
 
-/*
- * QNAP TS-409 specific power off method via UART1-attached PIC
- */
-
-#define UART1_REG(x)  (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-static void qnap_ts409_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack uart1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts409_init(void)
 {
 	/*
@@ -346,8 +232,10 @@ static void __init qnap_ts409_init(void)
 	 * Configure peripherals.
 	 */
 	orion5x_ehci0_init();
-	ts409_find_mac_addr();
-	orion5x_eth_init(&qnap_ts409_eth_data);
+	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+				 qnap_ts409_partitions[5].offset,
+				 qnap_ts409_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
@@ -368,8 +256,8 @@ static void __init qnap_ts409_init(void)
 		pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
 
-	/* register ts409 specific power-off method */
-	pm_power_off = qnap_ts409_power_off;
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
 }
 
 MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
new file mode 100644
index 0000000..8206039
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -0,0 +1,132 @@
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ *		Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/serial_reg.h>
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+	.phy_addr	= 8,
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+	u_int8_t addr[6];
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+			return -1;
+
+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
+
+	printk(KERN_INFO "tsx09: found ethernet mac address ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+	return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+	unsigned long addr;
+
+	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+		char *nor_page;
+		int ret = 0;
+
+		nor_page = ioremap(addr, 1024);
+		if (nor_page != NULL) {
+			ret = qnap_tsx09_check_mac_addr(nor_page);
+			iounmap(nor_page);
+		}
+
+		if (ret == 0)
+			break;
+	}
+}
diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h
new file mode 100644
index 0000000..0984264
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.h
@@ -0,0 +1,20 @@
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif