trivial: fix typos/grammar errors in Kconfig texts

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

13 files changed, 22 insertions, 22 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 3f325d3..cd8de89 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -109,7 +109,7 @@ config MACH_OMAP_PALMZ71
 	help
 	 Support for the Palm Zire71 PDA. To boot the kernel,
 	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more informations.
+	 http://hackndev.com/palm/z71 for more information.
 	 Say Y here if you have such a PDA, say N otherwise.
 
 config MACH_OMAP_PALMTT
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 05fe305..414a8ad 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -127,13 +127,13 @@ config BOARD_HAMMERHEAD
 	select CPU_AT32AP7000
 	select USB_ARCH_HAS_HCD
 	help
-	  The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel.
+	  The Hammerhead platform is built around an AVR32 32-bit microcontroller from Atmel.
 	  It offers versatile peripherals, such as ethernet, usb device, usb host etc.
 
-	  The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered
+	  The board also incorporates a power supply and is a Power over Ethernet (PoE) Powered
 	  Device (PD).
 
-	  Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
+	  Additionally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is
 	  mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which
 	  will cover even the most exceptional need of memory bandwidth. Together with the onboard
 	  video decoder the board is ready for video processing.
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 0c1f86e..3640cdc 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -777,7 +777,7 @@ config CACHELINE_ALIGNED_L1
 	default n if BF54x
 	depends on !BF531
 	help
-	  If enabled, cacheline_anligned data is linked
+	  If enabled, cacheline_aligned data is linked
 	  into L1 data memory. (less latency)
 
 config SYSCALL_TAB_L1
@@ -957,7 +957,7 @@ config MPU
 	  memory they do not own.  This comes at a performance penalty
 	  and is recommended only for debugging.
 
-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"
 
 menu "EBIU_AMGCTL Global Control"
 config C_AMCKEN
@@ -989,7 +989,7 @@ config C_B3PEN
 	default n
 
 choice
-	prompt"Enable Asynchonous Memory Banks"
+	prompt "Enable Asynchronous Memory Banks"
 	default C_AMBEN_ALL
 
 config C_AMBEN
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 3462245..7adac38 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -438,7 +438,7 @@ config ETRAX_SERIAL_PORT0_DMA1_IN
 	help
 	  Enables the DMA1 input channel for ser0 (ttyS0).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -565,7 +565,7 @@ config ETRAX_SERIAL_PORT2_DMA7_IN
 	help
 	  Enables the DMA7 input channel for ser2 (ttyS2).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
@@ -604,7 +604,7 @@ config ETRAX_SERIAL_PORT3_DMA3_IN
 	help
 	  Enables the DMA3 input channel for ser3 (ttyS3).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
diff --git a/arch/cris/arch-v32/Kconfig b/arch/cris/arch-v32/Kconfig
index 005ed2b..21bbd93 100644
--- a/arch/cris/arch-v32/Kconfig
+++ b/arch/cris/arch-v32/Kconfig
@@ -28,7 +28,7 @@ config	ETRAX_NBR_LED_GRP_ONE
 	help
 	  Select this if you want one Ethernet LED group. This LED group
 	  can be used for one or more Ethernet interfaces. However, it is
-	  recomended that each Ethernet interface use a dedicated LED group.
+	  recommended that each Ethernet interface use a dedicated LED group.
 
 config	ETRAX_NBR_LED_GRP_TWO
 	bool "Use two LED groups"
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 7a64fce..b9e328e 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -342,7 +342,7 @@ config ETRAX_SERIAL_PORT4_DMA9_IN
 	help
 	  Enables the DMA9 input channel for ser4 (ttyS4).
 	  If you do not enable DMA, an interrupt for each character will be
-	  used when receiveing data.
+	  used when receiving data.
 	  Normally you want to use DMA, unless you use the DMA channel for
 	  something else.
 
diff --git a/arch/cris/arch-v32/mach-fs/Kconfig b/arch/cris/arch-v32/mach-fs/Kconfig
index f6d7447..774de82 100644
--- a/arch/cris/arch-v32/mach-fs/Kconfig
+++ b/arch/cris/arch-v32/mach-fs/Kconfig
@@ -59,7 +59,7 @@ config ETRAX_SDRAM_GRP1_CONFIG
 	depends on ETRAX_ARCH_V32
 	default "0"
 	help
-	  SDRAM configuration for group 1. The defult value is 0
+	  SDRAM configuration for group 1. The default value is 0
 	  because group 1 is not used in the default configuration,
 	  described in the help for SDRAM_GRP0_CONFIG.
 
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 206cb79..92508c5 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -136,7 +136,7 @@ config MACH_JAZZ
 	help
 	 This a family of machines based on the MIPS R4030 chipset which was
 	 used by several vendors to build RISC/os and Windows NT workstations.
-	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
 	 Olivetti M700-10 workstations.
 
 config LASAT
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 74cc312..2e2160c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -342,7 +342,7 @@ config PHYP_DUMP
 	help
 	  Hypervisor-assisted dump is meant to be a kdump replacement
 	  offering robustness and speed not possible without system
-	  hypervisor assistence.
+	  hypervisor assistance.
 
 	  If unsure, say "N"
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 200b9cb..9a8bb53 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -298,7 +298,7 @@ config CPM
 config OF_RTC
 	bool
 	help
-	  Uses information from the OF or flattened device tree to instatiate
+	  Uses information from the OF or flattened device tree to instantiate
 	  platform devices for direct mapped RTC chips like the DS1742 or DS1743.
 
 source "arch/powerpc/sysdev/bestcomm/Kconfig"
diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig
index 0b192a1..29e4270 100644
--- a/arch/powerpc/sysdev/bestcomm/Kconfig
+++ b/arch/powerpc/sysdev/bestcomm/Kconfig
@@ -9,8 +9,8 @@ config PPC_BESTCOMM
 	select PPC_LIB_RHEAP
 	help
 	  BestComm is the name of the communication coprocessor found
-	  on the Freescale MPC5200 family of processor. It's usage is
-	  optionnal for some drivers (like ATA), but required for
+	  on the Freescale MPC5200 family of processor.  Its usage is
+	  optional for some drivers (like ATA), but required for
 	  others (like FEC).
 
 	  If you want to use drivers that require DMA operations,
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8d50d52..2d52b51 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -640,10 +640,10 @@ config GUSA_RB
 	depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
 	help
 	  Enabling this option will allow the kernel to implement some
-	  atomic operations using a software implemention of load-locked/
+	  atomic operations using a software implementation of load-locked/
 	  store-conditional (LLSC). On machines which do not have hardware
 	  LLSC, this should be more efficient than the other alternative of
-	  disabling insterrupts around the atomic sequence.
+	  disabling interrupts around the atomic sequence.
 
 endmenu
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 06c02c0..d7b5621 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1129,7 +1129,7 @@ config NODES_SHIFT
 	depends on NEED_MULTIPLE_NODES
 	---help---
 	  Specify the maximum number of NUMA Nodes available on the target
-	  system.  Increases memory reserved to accomodate various tables.
+	  system.  Increases memory reserved to accommodate various tables.
 
 config HAVE_ARCH_BOOTMEM
 	def_bool y
@@ -1307,7 +1307,7 @@ config MTRR_SANITIZER
 	  add writeback entries.
 
 	  Can be disabled with disable_mtrr_cleanup on the kernel command line.
-	  The largest mtrr entry size for a continous block can be set with
+	  The largest mtrr entry size for a continuous block can be set with
 	  mtrr_chunk_size.
 
 	  If unsure, say Y.