diff options
author | Andrew Isaacson <adi@broadcom.com> | 2005-10-19 23:59:11 -0700 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2005-10-29 19:32:49 +0100 |
commit | 8a1417de9e11f9f577499cd4fe89fa35f4bf54fa (patch) | |
tree | 73194ecc1c84772aaf0296df7852a9e36a13cab6 /arch | |
parent | dc41f94f770904f1fd63488ce4d30722ea514aad (diff) | |
download | kernel_samsung_tuna-8a1417de9e11f9f577499cd4fe89fa35f4bf54fa.zip kernel_samsung_tuna-8a1417de9e11f9f577499cd4fe89fa35f4bf54fa.tar.gz kernel_samsung_tuna-8a1417de9e11f9f577499cd4fe89fa35f4bf54fa.tar.bz2 |
BCM1480 HT support
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/mips/Kconfig | 1 | ||||
-rw-r--r-- | arch/mips/pci/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/pci/pci-bcm1480.c | 21 | ||||
-rw-r--r-- | arch/mips/pci/pci-bcm1480ht.c | 224 | ||||
-rw-r--r-- | arch/mips/pci/pci.c | 17 |
5 files changed, 248 insertions, 17 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index df5094d..3c43863 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -554,6 +554,7 @@ config SIBYTE_BIGSUR select SWAP_IO_SPACE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select PCI_DOMAINS config SIBYTE_SWARM bool "Support for Sibyte BCM91250A-SWARM" diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index cd697f6..7b74683 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ obj-$(CONFIG_SGI_IP27) += pci-ip27.o obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o -obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o +obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 12bb744..4905d85 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -56,13 +56,11 @@ static void *cfg_space; #define PCI_BUS_ENABLED 1 -#define LDT_BUS_ENABLED 2 -#define PCI_DEVICE_MODE 4 +#define PCI_DEVICE_MODE 2 static int bcm1480_bus_status = 0; #define PCI_BRIDGE_DEVICE 0 -#define LDT_BRIDGE_DEVICE 1 /* * Read/write 32-bit values in config space. @@ -95,10 +93,13 @@ int pcibios_plat_dev_init(struct pci_dev *dev) */ static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn) { + u32 devno; + if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) return 0; if (bus->number == 0) { + devno = PCI_SLOT(devfn); if (bcm1480_bus_status & PCI_DEVICE_MODE) return 0; else @@ -175,15 +176,15 @@ struct pci_ops bcm1480_pci_ops = { static struct resource bcm1480_mem_resource = { .name = "BCM1480 PCI MEM", - .start = 0x40000000UL, - .end = 0x5fffffffUL, + .start = 0x30000000UL, + .end = 0x3fffffffUL, .flags = IORESOURCE_MEM, }; static struct resource bcm1480_io_resource = { .name = "BCM1480 PCI I/O", - .start = 0x00000000UL, - .end = 0x01ffffffUL, + .start = 0x2c000000UL, + .end = 0x2dffffffUL, .flags = IORESOURCE_IO, }; @@ -207,9 +208,9 @@ static int __init bcm1480_pcibios_init(void) PCIBIOS_MIN_IO = 0x00008000UL; PCIBIOS_MIN_MEM = 0x01000000UL; - /* Set I/O resource limits. */ - ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by bcm1480 */ - iomem_resource.end = 0xffffffffUL; /* no HT support yet */ + /* Set I/O resource limits. - unlimited for now to accomodate HT */ + ioport_resource.end = 0xffffffffUL; + iomem_resource.end = 0xffffffffUL; cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024); diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c new file mode 100644 index 0000000..aca4a2e --- /dev/null +++ b/arch/mips/pci/pci-bcm1480ht.c @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2001,2002,2005 Broadcom Corporation + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * BCM1480/1455-specific HT support (looking like PCI) + * + * This module provides the glue between Linux's PCI subsystem + * and the hardware. We basically provide glue for accessing + * configuration space, and set up the translation for I/O + * space accesses. + * + * To access configuration space, we use ioremap. In the 32-bit + * kernel, this consumes either 4 or 8 page table pages, and 16MB of + * kernel mapped memory. Hopefully neither of these should be a huge + * problem. + * + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/tty.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/bcm1480_scd.h> +#include <asm/sibyte/board.h> +#include <asm/io.h> + +/* + * Macros for calculating offsets into config space given a device + * structure or dev/fun/reg + */ +#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where)) +#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where) + +static void *ht_cfg_space; + +#define PCI_BUS_ENABLED 1 +#define PCI_DEVICE_MODE 2 + +static int bcm1480ht_bus_status = 0; + +#define PCI_BRIDGE_DEVICE 0 +#define HT_BRIDGE_DEVICE 1 + +/* + * HT's level-sensitive interrupts require EOI, which is generated + * through a 4MB memory-mapped region + */ +unsigned long ht_eoi_space; + +/* + * Read/write 32-bit values in config space. + */ +static inline u32 READCFG32(u32 addr) +{ + return *(u32 *)(ht_cfg_space + (addr&~3)); +} + +static inline void WRITECFG32(u32 addr, u32 data) +{ + *(u32 *)(ht_cfg_space + (addr & ~3)) = data; +} + +/* + * Some checks before doing config cycles: + * In PCI Device Mode, hide everything on bus 0 except the LDT host + * bridge. Otherwise, access is controlled by bridge MasterEn bits. + */ +static int bcm1480ht_can_access(struct pci_bus *bus, int devfn) +{ + u32 devno; + + if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) + return 0; + + if (bus->number == 0) { + devno = PCI_SLOT(devfn); + if (bcm1480ht_bus_status & PCI_DEVICE_MODE) + return 0; + } + return 1; +} + +/* + * Read/write access functions for various sizes of values + * in config space. Return all 1's for disallowed accesses + * for a kludgy but adequate simulation of master aborts. + */ + +static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (bcm1480ht_can_access(bus, devfn)) + data = READCFG32(CFGADDR(bus, devfn, where)); + else + data = 0xFFFFFFFF; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 cfgaddr = CFGADDR(bus, devfn, where); + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!bcm1480ht_can_access(bus, devfn)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = READCFG32(cfgaddr); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + WRITECFG32(cfgaddr, data); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm1480ht_pcibios_get_busno(void) +{ + return 0; +} + +struct pci_ops bcm1480ht_pci_ops = { + .read = bcm1480ht_pcibios_read, + .write = bcm1480ht_pcibios_write, +}; + +static struct resource bcm1480ht_mem_resource = { + .name = "BCM1480 HT MEM", + .start = 0x40000000UL, + .end = 0x5fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource bcm1480ht_io_resource = { + .name = "BCM1480 HT I/O", + .start = 0x00000000UL, + .end = 0x01ffffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller bcm1480ht_controller = { + .pci_ops = &bcm1480ht_pci_ops, + .mem_resource = &bcm1480ht_mem_resource, + .io_resource = &bcm1480ht_io_resource, + .index = 1, + .get_busno = bcm1480ht_pcibios_get_busno, +}; + +static int __init bcm1480ht_pcibios_init(void) +{ + uint32_t cmdreg; + + ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024); + + /* + * See if the PCI bus has been configured by the firmware. + */ + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), + PCI_COMMAND)); + if (!(cmdreg & PCI_COMMAND_MASTER)) { + printk("HT: Skipping HT probe. Bus is not initialized.\n"); + iounmap(ht_cfg_space); + return 1; /* XXX */ + } + bcm1480ht_bus_status |= PCI_BUS_ENABLED; + + ht_eoi_space = (unsigned long) + ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES, + 4 * 1024 * 1024); + + register_pci_controller(&bcm1480ht_controller); + + return 0; +} + +arch_initcall(bcm1480ht_pcibios_init); diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 170c665..21402ff 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -127,15 +127,20 @@ static int __init pcibios_init(void) if (!hose->iommu) PCI_DMA_BUS_IS_PHYS = 1; + if (hose->get_busno && pci_probe_only) + next_busno = (*hose->get_busno)(); + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); hose->bus = bus; hose->need_domain_info = need_domain_info; - next_busno = bus->subordinate + 1; - /* Don't allow 8-bit bus number overflow inside the hose - - reserve some space for bridges. */ - if (next_busno > 224) { - next_busno = 0; - need_domain_info = 1; + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) { + next_busno = 0; + need_domain_info = 1; + } } continue; |