Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

5 files changed, 47 insertions, 16 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 76be229..cae1b8c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -399,7 +399,7 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
 			goto free_id;
 		}
 
-		pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, "value");
+		pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, NULL, "value");
 		if (!pdesc->value_sd) {
 			ret = -ENODEV;
 			goto free_id;
@@ -416,7 +416,8 @@ static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev,
 	return 0;
 
 free_sd:
-	sysfs_put(pdesc->value_sd);
+	if (pdesc)
+		sysfs_put(pdesc->value_sd);
 free_id:
 	idr_remove(&pdesc_idr, id);
 	desc->flags &= GPIO_FLAGS_MASK;
diff --git a/drivers/gpio/it8761e_gpio.c b/drivers/gpio/it8761e_gpio.c
index 753219c..41a9388 100644
--- a/drivers/gpio/it8761e_gpio.c
+++ b/drivers/gpio/it8761e_gpio.c
@@ -80,8 +80,8 @@ static int it8761e_gpio_get(struct gpio_chip *gc, unsigned gpio_num)
 	u16 reg;
 	u8 bit;
 
-	bit = gpio_num % 7;
-	reg = (gpio_num >= 7) ? gpio_ba + 1 : gpio_ba;
+	bit = gpio_num % 8;
+	reg = (gpio_num >= 8) ? gpio_ba + 1 : gpio_ba;
 
 	return !!(inb(reg) & (1 << bit));
 }
@@ -91,8 +91,8 @@ static int it8761e_gpio_direction_in(struct gpio_chip *gc, unsigned gpio_num)
 	u8 curr_dirs;
 	u8 io_reg, bit;
 
-	bit = gpio_num % 7;
-	io_reg = (gpio_num >= 7) ? GPIO2X_IO : GPIO1X_IO;
+	bit = gpio_num % 8;
+	io_reg = (gpio_num >= 8) ? GPIO2X_IO : GPIO1X_IO;
 
 	spin_lock(&sio_lock);
 
@@ -116,8 +116,8 @@ static void it8761e_gpio_set(struct gpio_chip *gc,
 	u8 curr_vals, bit;
 	u16 reg;
 
-	bit = gpio_num % 7;
-	reg = (gpio_num >= 7) ? gpio_ba + 1 : gpio_ba;
+	bit = gpio_num % 8;
+	reg = (gpio_num >= 8) ? gpio_ba + 1 : gpio_ba;
 
 	spin_lock(&sio_lock);
 
@@ -135,8 +135,8 @@ static int it8761e_gpio_direction_out(struct gpio_chip *gc,
 {
 	u8 curr_dirs, io_reg, bit;
 
-	bit = gpio_num % 7;
-	io_reg = (gpio_num >= 7) ? GPIO2X_IO : GPIO1X_IO;
+	bit = gpio_num % 8;
+	io_reg = (gpio_num >= 8) ? GPIO2X_IO : GPIO1X_IO;
 
 	it8761e_gpio_set(gc, gpio_num, val);
 
@@ -200,7 +200,7 @@ static int __init it8761e_gpio_init(void)
 		return -EBUSY;
 
 	it8761e_gpio_chip.base = -1;
-	it8761e_gpio_chip.ngpio = 14;
+	it8761e_gpio_chip.ngpio = 16;
 
 	err = gpiochip_add(&it8761e_gpio_chip);
 	if (err < 0)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 1db114b..f156ab3 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -252,6 +252,18 @@ static void pca953x_irq_bus_lock(unsigned int irq)
 static void pca953x_irq_bus_sync_unlock(unsigned int irq)
 {
 	struct pca953x_chip *chip = get_irq_chip_data(irq);
+	uint16_t new_irqs;
+	uint16_t level;
+
+	/* Look for any newly setup interrupt */
+	new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
+	new_irqs &= ~chip->reg_direction;
+
+	while (new_irqs) {
+		level = __ffs(new_irqs);
+		pca953x_gpio_direction_input(&chip->gpio_chip, level);
+		new_irqs &= ~(1 << level);
+	}
 
 	mutex_unlock(&chip->irq_lock);
 }
@@ -278,7 +290,7 @@ static int pca953x_irq_set_type(unsigned int irq, unsigned int type)
 	else
 		chip->irq_trig_raise &= ~mask;
 
-	return pca953x_gpio_direction_input(&chip->gpio_chip, level);
+	return 0;
 }
 
 static struct irq_chip pca953x_irq_chip = {
diff --git a/drivers/gpio/pl061.c b/drivers/gpio/pl061.c
index 5ad8f77..105701a 100644
--- a/drivers/gpio/pl061.c
+++ b/drivers/gpio/pl061.c
@@ -91,6 +91,12 @@ static int pl061_direction_output(struct gpio_chip *gc, unsigned offset,
 	gpiodir = readb(chip->base + GPIODIR);
 	gpiodir |= 1 << offset;
 	writeb(gpiodir, chip->base + GPIODIR);
+
+	/*
+	 * gpio value is set again, because pl061 doesn't allow to set value of
+	 * a gpio pin before configuring it in OUT mode.
+	 */
+	writeb(!!value << offset, chip->base + (1 << (offset + 2)));
 	spin_unlock_irqrestore(&chip->lock, flags);
 
 	return 0;
@@ -183,7 +189,7 @@ static int pl061_irq_type(unsigned irq, unsigned trigger)
 		gpioibe &= ~(1 << offset);
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			gpioiev |= 1 << offset;
-		else
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			gpioiev &= ~(1 << offset);
 	}
 	writeb(gpioibe, chip->base + GPIOIBE);
@@ -204,7 +210,7 @@ static struct irq_chip pl061_irqchip = {
 
 static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct list_head *chip_list = get_irq_chip_data(irq);
+	struct list_head *chip_list = get_irq_data(irq);
 	struct list_head *ptr;
 	struct pl061_gpio *chip;
 
@@ -297,9 +303,9 @@ static int __init pl061_probe(struct amba_device *dev, struct amba_id *id)
 			goto iounmap;
 		}
 		INIT_LIST_HEAD(chip_list);
-		set_irq_chip_data(irq, chip_list);
+		set_irq_data(irq, chip_list);
 	} else
-		chip_list = get_irq_chip_data(irq);
+		chip_list = get_irq_data(irq);
 	list_add(&chip->list, chip_list);
 
 	for (i = 0; i < PL061_GPIO_NR; i++) {
diff --git a/drivers/gpio/wm8994-gpio.c b/drivers/gpio/wm8994-gpio.c
index 7607cc6..2ac9a16 100644
--- a/drivers/gpio/wm8994-gpio.c
+++ b/drivers/gpio/wm8994-gpio.c
@@ -81,6 +81,18 @@ static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset, WM8994_GPN_LVL, value);
 }
 
+static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
+	struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+
+	if (!wm8994->irq_base)
+		return -EINVAL;
+
+	return wm8994->irq_base + offset;
+}
+
+
 #ifdef CONFIG_DEBUG_FS
 static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {