drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)

This enables the use of interrupts on r6xx/r7xx hardware.
Interrupts are implemented via a ring buffer.  The GPU adds
interrupts vectors to the ring and the host reads them off
in the interrupt handler.  The interrupt controller requires
firmware like the CP.  This firmware must be installed and
accessble to the firmware loader for interrupts to function.

MSIs don't seem to work on my RS780.  They work fine on all
my discrete cards.  I'm not sure about other RS780s or
RS880s.  I've disabled MSIs on RS780 and RS880, but it would
probably be worth checking on some other systems.

v2 - fix some checkpatch.pl problems;
     re-read the disp int status reg if we restart the ih;

v3 - remove the irq handler if r600_irq_init() fails;
     remove spinlock in r600_ih_ring_fini();
     move ih rb overflow check to r600_get_ih_wptr();
     move irq ack to separate function;

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 157 insertions, 2 deletions

diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index b7f4ce2..61ccde5 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -456,7 +456,163 @@
 #define         WAIT_2D_IDLECLEAN_bit                           (1 << 16)
 #define         WAIT_3D_IDLECLEAN_bit                           (1 << 17)
 
-
+#define IH_RB_CNTL                                        0x3e00
+#       define IH_RB_ENABLE                               (1 << 0)
+#       define IH_IB_SIZE(x)                              ((x) << 1) /* log2 */
+#       define IH_RB_FULL_DRAIN_ENABLE                    (1 << 6)
+#       define IH_WPTR_WRITEBACK_ENABLE                   (1 << 8)
+#       define IH_WPTR_WRITEBACK_TIMER(x)                 ((x) << 9) /* log2 */
+#       define IH_WPTR_OVERFLOW_ENABLE                    (1 << 16)
+#       define IH_WPTR_OVERFLOW_CLEAR                     (1 << 31)
+#define IH_RB_BASE                                        0x3e04
+#define IH_RB_RPTR                                        0x3e08
+#define IH_RB_WPTR                                        0x3e0c
+#       define RB_OVERFLOW                                (1 << 0)
+#       define WPTR_OFFSET_MASK                           0x3fffc
+#define IH_RB_WPTR_ADDR_HI                                0x3e10
+#define IH_RB_WPTR_ADDR_LO                                0x3e14
+#define IH_CNTL                                           0x3e18
+#       define ENABLE_INTR                                (1 << 0)
+#       define IH_MC_SWAP(x)                              ((x) << 2)
+#       define IH_MC_SWAP_NONE                            0
+#       define IH_MC_SWAP_16BIT                           1
+#       define IH_MC_SWAP_32BIT                           2
+#       define IH_MC_SWAP_64BIT                           3
+#       define RPTR_REARM                                 (1 << 4)
+#       define MC_WRREQ_CREDIT(x)                         ((x) << 15)
+#       define MC_WR_CLEAN_CNT(x)                         ((x) << 20)
+
+#define RLC_CNTL                                          0x3f00
+#       define RLC_ENABLE                                 (1 << 0)
+#define RLC_HB_BASE                                       0x3f10
+#define RLC_HB_CNTL                                       0x3f0c
+#define RLC_HB_RPTR                                       0x3f20
+#define RLC_HB_WPTR                                       0x3f1c
+#define RLC_HB_WPTR_LSB_ADDR                              0x3f14
+#define RLC_HB_WPTR_MSB_ADDR                              0x3f18
+#define RLC_MC_CNTL                                       0x3f44
+#define RLC_UCODE_CNTL                                    0x3f48
+#define RLC_UCODE_ADDR                                    0x3f2c
+#define RLC_UCODE_DATA                                    0x3f30
+
+#define SRBM_SOFT_RESET                                   0xe60
+#       define SOFT_RESET_RLC                             (1 << 13)
+
+#define CP_INT_CNTL                                       0xc124
+#       define CNTX_BUSY_INT_ENABLE                       (1 << 19)
+#       define CNTX_EMPTY_INT_ENABLE                      (1 << 20)
+#       define SCRATCH_INT_ENABLE                         (1 << 25)
+#       define TIME_STAMP_INT_ENABLE                      (1 << 26)
+#       define IB2_INT_ENABLE                             (1 << 29)
+#       define IB1_INT_ENABLE                             (1 << 30)
+#       define RB_INT_ENABLE                              (1 << 31)
+#define CP_INT_STATUS                                     0xc128
+#       define SCRATCH_INT_STAT                           (1 << 25)
+#       define TIME_STAMP_INT_STAT                        (1 << 26)
+#       define IB2_INT_STAT                               (1 << 29)
+#       define IB1_INT_STAT                               (1 << 30)
+#       define RB_INT_STAT                                (1 << 31)
+
+#define GRBM_INT_CNTL                                     0x8060
+#       define RDERR_INT_ENABLE                           (1 << 0)
+#       define WAIT_COUNT_TIMEOUT_INT_ENABLE              (1 << 1)
+#       define GUI_IDLE_INT_ENABLE                        (1 << 19)
+
+#define INTERRUPT_CNTL                                    0x5468
+#       define IH_DUMMY_RD_OVERRIDE                       (1 << 0)
+#       define IH_DUMMY_RD_EN                             (1 << 1)
+#       define IH_REQ_NONSNOOP_EN                         (1 << 3)
+#       define GEN_IH_INT_EN                              (1 << 8)
+#define INTERRUPT_CNTL2                                   0x546c
+
+#define D1MODE_VBLANK_STATUS                              0x6534
+#define D2MODE_VBLANK_STATUS                              0x6d34
+#       define DxMODE_VBLANK_OCCURRED                     (1 << 0)
+#       define DxMODE_VBLANK_ACK                          (1 << 4)
+#       define DxMODE_VBLANK_STAT                         (1 << 12)
+#       define DxMODE_VBLANK_INTERRUPT                    (1 << 16)
+#       define DxMODE_VBLANK_INTERRUPT_TYPE               (1 << 17)
+#define D1MODE_VLINE_STATUS                               0x653c
+#define D2MODE_VLINE_STATUS                               0x6d3c
+#       define DxMODE_VLINE_OCCURRED                      (1 << 0)
+#       define DxMODE_VLINE_ACK                           (1 << 4)
+#       define DxMODE_VLINE_STAT                          (1 << 12)
+#       define DxMODE_VLINE_INTERRUPT                     (1 << 16)
+#       define DxMODE_VLINE_INTERRUPT_TYPE                (1 << 17)
+#define DxMODE_INT_MASK                                   0x6540
+#       define D1MODE_VBLANK_INT_MASK                     (1 << 0)
+#       define D1MODE_VLINE_INT_MASK                      (1 << 4)
+#       define D2MODE_VBLANK_INT_MASK                     (1 << 8)
+#       define D2MODE_VLINE_INT_MASK                      (1 << 12)
+#define DCE3_DISP_INTERRUPT_STATUS                        0x7ddc
+#       define DC_HPD1_INTERRUPT                          (1 << 18)
+#       define DC_HPD2_INTERRUPT                          (1 << 19)
+#define DISP_INTERRUPT_STATUS                             0x7edc
+#       define LB_D1_VLINE_INTERRUPT                      (1 << 2)
+#       define LB_D2_VLINE_INTERRUPT                      (1 << 3)
+#       define LB_D1_VBLANK_INTERRUPT                     (1 << 4)
+#       define LB_D2_VBLANK_INTERRUPT                     (1 << 5)
+#       define DACA_AUTODETECT_INTERRUPT                  (1 << 16)
+#       define DACB_AUTODETECT_INTERRUPT                  (1 << 17)
+#       define DC_HOT_PLUG_DETECT1_INTERRUPT              (1 << 18)
+#       define DC_HOT_PLUG_DETECT2_INTERRUPT              (1 << 19)
+#       define DC_I2C_SW_DONE_INTERRUPT                   (1 << 20)
+#       define DC_I2C_HW_DONE_INTERRUPT                   (1 << 21)
+#define DCE3_DISP_INTERRUPT_STATUS_CONTINUE               0x7de8
+#       define DC_HPD4_INTERRUPT                          (1 << 14)
+#       define DC_HPD4_RX_INTERRUPT                       (1 << 15)
+#       define DC_HPD3_INTERRUPT                          (1 << 28)
+#       define DC_HPD1_RX_INTERRUPT                       (1 << 29)
+#       define DC_HPD2_RX_INTERRUPT                       (1 << 30)
+#define DCE3_DISP_INTERRUPT_STATUS_CONTINUE2              0x7dec
+#       define DC_HPD3_RX_INTERRUPT                       (1 << 0)
+#       define DIGA_DP_VID_STREAM_DISABLE_INTERRUPT       (1 << 1)
+#       define DIGA_DP_STEER_FIFO_OVERFLOW_INTERRUPT      (1 << 2)
+#       define DIGB_DP_VID_STREAM_DISABLE_INTERRUPT       (1 << 3)
+#       define DIGB_DP_STEER_FIFO_OVERFLOW_INTERRUPT      (1 << 4)
+#       define AUX1_SW_DONE_INTERRUPT                     (1 << 5)
+#       define AUX1_LS_DONE_INTERRUPT                     (1 << 6)
+#       define AUX2_SW_DONE_INTERRUPT                     (1 << 7)
+#       define AUX2_LS_DONE_INTERRUPT                     (1 << 8)
+#       define AUX3_SW_DONE_INTERRUPT                     (1 << 9)
+#       define AUX3_LS_DONE_INTERRUPT                     (1 << 10)
+#       define AUX4_SW_DONE_INTERRUPT                     (1 << 11)
+#       define AUX4_LS_DONE_INTERRUPT                     (1 << 12)
+#       define DIGA_DP_FAST_TRAINING_COMPLETE_INTERRUPT   (1 << 13)
+#       define DIGB_DP_FAST_TRAINING_COMPLETE_INTERRUPT   (1 << 14)
+/* DCE 3.2 */
+#       define AUX5_SW_DONE_INTERRUPT                     (1 << 15)
+#       define AUX5_LS_DONE_INTERRUPT                     (1 << 16)
+#       define AUX6_SW_DONE_INTERRUPT                     (1 << 17)
+#       define AUX6_LS_DONE_INTERRUPT                     (1 << 18)
+#       define DC_HPD5_INTERRUPT                          (1 << 19)
+#       define DC_HPD5_RX_INTERRUPT                       (1 << 20)
+#       define DC_HPD6_INTERRUPT                          (1 << 21)
+#       define DC_HPD6_RX_INTERRUPT                       (1 << 22)
+
+#define DCE3_DACA_AUTODETECT_INT_CONTROL                  0x7038
+#define DCE3_DACB_AUTODETECT_INT_CONTROL                  0x7138
+#define DACA_AUTODETECT_INT_CONTROL                       0x7838
+#define DACB_AUTODETECT_INT_CONTROL                       0x7a38
+#       define DACx_AUTODETECT_ACK                        (1 << 0)
+#       define DACx_AUTODETECT_INT_ENABLE                 (1 << 16)
+
+#define DC_HOT_PLUG_DETECT1_INT_CONTROL                   0x7d08
+#define DC_HOT_PLUG_DETECT2_INT_CONTROL                   0x7d18
+#define DC_HOT_PLUG_DETECT3_INT_CONTROL                   0x7d2c
+#       define DC_HOT_PLUG_DETECTx_INT_ACK                (1 << 0)
+#       define DC_HOT_PLUG_DETECTx_INT_POLARITY           (1 << 8)
+#       define DC_HOT_PLUG_DETECTx_INT_EN                 (1 << 16)
+/* DCE 3.2 */
+#define DC_HPD1_INT_CONTROL                               0x7d04
+#define DC_HPD2_INT_CONTROL                               0x7d10
+#define DC_HPD3_INT_CONTROL                               0x7d1c
+#define DC_HPD4_INT_CONTROL                               0x7d28
+#       define DC_HPDx_INT_ACK                            (1 << 0)
+#       define DC_HPDx_INT_POLARITY                       (1 << 8)
+#       define DC_HPDx_INT_EN                             (1 << 16)
+#       define DC_HPDx_RX_INT_ACK                         (1 << 20)
+#       define DC_HPDx_RX_INT_EN                          (1 << 24)
 
 /*
  * PM4
@@ -500,7 +656,6 @@
 #define	PACKET3_WAIT_REG_MEM				0x3C
 #define	PACKET3_MEM_WRITE				0x3D
 #define	PACKET3_INDIRECT_BUFFER				0x32
-#define	PACKET3_CP_INTERRUPT				0x40
 #define	PACKET3_SURFACE_SYNC				0x43
 #              define PACKET3_CB0_DEST_BASE_ENA    (1 << 6)
 #              define PACKET3_TC_ACTION_ENA        (1 << 23)