Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 308 insertions, 0 deletions

diff --git a/drivers/ide/pci/it8172.c b/drivers/ide/pci/it8172.c
new file mode 100644
index 0000000..631927c
--- /dev/null
+++ b/drivers/ide/pci/it8172.c
@@ -0,0 +1,308 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      IT8172 IDE controller support
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/it8172/it8172_int.h>
+
+/*
+ * Prototypes
+ */
+static u8 it8172_ratemask (ide_drive_t *drive)
+{
+	return 1;
+}
+
+static void it8172_tune_drive (ide_drive_t *drive, u8 pio)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= hwif->pci_dev;
+	int is_slave		= (&hwif->drives[1] == drive);
+	unsigned long flags;
+	u16 drive_enables;
+	u32 drive_timing;
+
+	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+	spin_lock_irqsave(&ide_lock, flags);
+	pci_read_config_word(dev, 0x40, &drive_enables);
+	pci_read_config_dword(dev, 0x44, &drive_timing);
+
+	/*
+	 * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
+	 * are being left at the default values of 8 PCI clocks (242 nsec
+	 * for a 33 MHz clock). These can be safely shortened at higher
+	 * PIO modes. The DIOR/DIOW pulse width and recovery times only
+	 * apply to PIO modes, not to the DMA modes.
+	 */
+
+	/*
+	 * Enable port 0x44. The IT8172G spec is confused; it calls
+	 * this register the "Slave IDE Timing Register", but in fact,
+	 * it controls timing for both master and slave drives.
+	 */
+	drive_enables |= 0x4000;
+
+	if (is_slave) {
+		drive_enables &= 0xc006;
+		if (pio > 1)
+			/* enable prefetch and IORDY sample-point */
+			drive_enables |= 0x0060;
+	} else {
+		drive_enables &= 0xc060;
+		if (pio > 1)
+			/* enable prefetch and IORDY sample-point */
+			drive_enables |= 0x0006;
+	}
+
+	pci_write_config_word(dev, 0x40, drive_enables);
+	spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+static u8 it8172_dma_2_pio (u8 xfer_rate)
+{
+	switch(xfer_rate) {
+		case XFER_UDMA_5:
+		case XFER_UDMA_4:
+		case XFER_UDMA_3:
+		case XFER_UDMA_2:
+		case XFER_UDMA_1:
+		case XFER_UDMA_0:
+		case XFER_MW_DMA_2:
+		case XFER_PIO_4:
+			return 4;
+		case XFER_MW_DMA_1:
+		case XFER_PIO_3:
+			return 3;
+		case XFER_SW_DMA_2:
+		case XFER_PIO_2:
+			return 2;
+		case XFER_MW_DMA_0:
+		case XFER_SW_DMA_1:
+		case XFER_SW_DMA_0:
+		case XFER_PIO_1:
+		case XFER_PIO_0:
+		case XFER_PIO_SLOW:
+		default:
+			return 0;
+	}
+}
+
+static int it8172_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct pci_dev *dev	= hwif->pci_dev;
+	u8 speed	= ide_rate_filter(it8172_ratemask(drive), xferspeed);
+	int a_speed		= 3 << (drive->dn * 4);
+	int u_flag		= 1 << drive->dn;
+	int u_speed		= 0;
+	u8 reg48, reg4a;
+
+	pci_read_config_byte(dev, 0x48, &reg48);
+	pci_read_config_byte(dev, 0x4a, &reg4a);
+
+    /*
+     * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
+     * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
+     * transfers on some drives, even though both numbers meet the minimum
+     * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
+     * So the faster times are just commented out here. The good news is
+     * that the slower cycle time has very little affect on transfer
+     * performance.
+     */
+    
+	switch(speed) {
+		case XFER_UDMA_4:
+		case XFER_UDMA_2:	//u_speed = 2 << (drive->dn * 4); break;
+		case XFER_UDMA_5:
+		case XFER_UDMA_3:
+		case XFER_UDMA_1:	//u_speed = 1 << (drive->dn * 4); break;
+		case XFER_UDMA_0:	u_speed = 0 << (drive->dn * 4); break;
+		case XFER_MW_DMA_2:
+		case XFER_MW_DMA_1:
+		case XFER_MW_DMA_0:
+		case XFER_SW_DMA_2:	break;
+		case XFER_PIO_4:
+		case XFER_PIO_3:
+		case XFER_PIO_2:
+		case XFER_PIO_0:	break;
+		default:		return -1;
+	}
+
+	if (speed >= XFER_UDMA_0) {
+		pci_write_config_byte(dev, 0x48, reg48 | u_flag);
+		reg4a &= ~a_speed;
+		pci_write_config_byte(dev, 0x4a, reg4a | u_speed);
+	} else {
+		pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
+		pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed);
+	}
+
+	it8172_tune_drive(drive, it8172_dma_2_pio(speed));
+	return (ide_config_drive_speed(drive, speed));
+}
+
+static int it8172_config_chipset_for_dma (ide_drive_t *drive)
+{
+	u8 speed = ide_dma_speed(drive, it8172_ratemask(drive));
+
+	if (!(speed)) {
+		u8 tspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
+		speed = it8172_dma_2_pio(XFER_PIO_0 + tspeed);
+	}
+
+	(void) it8172_tune_chipset(drive, speed);
+	return ide_dma_enable(drive);
+}
+
+static int it8172_config_drive_xfer_rate (ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= HWIF(drive);
+	struct hd_driveid *id	= drive->id;
+
+	drive->init_speed = 0;
+
+	if (id && (id->capability & 1) && drive->autodma) {
+
+		if (ide_use_dma(drive)) {
+			if (it8172_config_chipset_for_dma(drive))
+				return hwif->ide_dma_on(drive);
+		}
+
+		goto fast_ata_pio;
+
+	} else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+		it8172_tune_drive(drive, 5);
+		return hwif->ide_dma_off_quietly(drive);
+	}
+	/* IORDY not supported */
+	return 0;
+}
+
+static unsigned int __init init_chipset_it8172 (struct pci_dev *dev, const char *name)
+{
+	unsigned char progif;
+    
+	/*
+	 * Place both IDE interfaces into PCI "native" mode
+	 */
+	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+	pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);    
+
+	return IT8172_IDE_IRQ;
+}
+
+
+static void __init init_hwif_it8172 (ide_hwif_t *hwif)
+{
+	struct pci_dev* dev = hwif->pci_dev;
+	unsigned long cmdBase, ctrlBase;
+    
+	hwif->autodma = 0;
+	hwif->tuneproc = &it8172_tune_drive;
+	hwif->speedproc = &it8172_tune_chipset;
+
+	cmdBase = dev->resource[0].start;
+	ctrlBase = dev->resource[1].start;
+    
+	ide_init_hwif_ports(&hwif->hw, cmdBase, ctrlBase | 2, NULL);
+	memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
+	hwif->noprobe = 0;
+
+	if (!hwif->dma_base) {
+		hwif->drives[0].autotune = 1;
+		hwif->drives[1].autotune = 1;
+		return;
+	}
+
+	hwif->atapi_dma = 1;
+	hwif->ultra_mask = 0x07;
+	hwif->mwdma_mask = 0x06;
+	hwif->swdma_mask = 0x04;
+
+	hwif->ide_dma_check = &it8172_config_drive_xfer_rate;
+	if (!noautodma)
+		hwif->autodma = 1;
+	hwif->drives[0].autodma = hwif->autodma;
+	hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t it8172_chipsets[] __devinitdata = {
+	{	/* 0 */
+		.name		= "IT8172G",
+		.init_chipset	= init_chipset_it8172,
+		.init_hwif	= init_hwif_it8172,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x00,0x00,0x00}, {0x40,0x00,0x01}},
+		.bootable	= ON_BOARD,
+	}
+};
+
+static int __devinit it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+        if ((!(PCI_FUNC(dev->devfn) & 1) ||
+            (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
+		return -ENODEV; /* IT8172 is more than an IDE controller */
+	return ide_setup_pci_device(dev, &it8172_chipsets[id->driver_data]);
+}
+
+static struct pci_device_id it8172_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, it8172_pci_tbl);
+
+static struct pci_driver driver = {
+	.name		= "IT8172_IDE",
+	.id_table	= it8172_pci_tbl,
+	.probe		= it8172_init_one,
+};
+
+static int it8172_ide_init(void)
+{
+	return ide_pci_register_driver(&driver);
+}
+
+module_init(it8172_ide_init);
+
+MODULE_AUTHOR("SteveL@mvista.com");
+MODULE_DESCRIPTION("PCI driver module for ITE 8172 IDE");
+MODULE_LICENSE("GPL");