diff options
author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-10-21 20:57:23 +0200 |
---|---|---|
committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2008-10-21 20:57:23 +0200 |
commit | 2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch) | |
tree | 17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/pmac.c | |
parent | 2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff) | |
download | kernel_samsung_tuna-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.zip kernel_samsung_tuna-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.gz kernel_samsung_tuna-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.bz2 |
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pmac.c')
-rw-r--r-- | drivers/ide/pmac.c | 1736 |
1 files changed, 1736 insertions, 0 deletions
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c new file mode 100644 index 0000000..2e19d62 --- /dev/null +++ b/drivers/ide/pmac.c @@ -0,0 +1,1736 @@ +/* + * Support for IDE interfaces on PowerMacs. + * + * These IDE interfaces are memory-mapped and have a DBDMA channel + * for doing DMA. + * + * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Some code taken from drivers/ide/ide-dma.c: + * + * Copyright (c) 1995-1998 Mark Lord + * + * TODO: - Use pre-calculated (kauai) timing tables all the time and + * get rid of the "rounded" tables used previously, so we have the + * same table format for all controllers and can then just have one + * big table + * + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/ide.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/scatterlist.h> + +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/dbdma.h> +#include <asm/ide.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/sections.h> +#include <asm/irq.h> + +#ifndef CONFIG_PPC64 +#include <asm/mediabay.h> +#endif + +#define DRV_NAME "ide-pmac" + +#undef IDE_PMAC_DEBUG + +#define DMA_WAIT_TIMEOUT 50 + +typedef struct pmac_ide_hwif { + unsigned long regbase; + int irq; + int kind; + int aapl_bus_id; + unsigned mediabay : 1; + unsigned broken_dma : 1; + unsigned broken_dma_warn : 1; + struct device_node* node; + struct macio_dev *mdev; + u32 timings[4]; + volatile u32 __iomem * *kauai_fcr; +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + /* Those fields are duplicating what is in hwif. We currently + * can't use the hwif ones because of some assumptions that are + * beeing done by the generic code about the kind of dma controller + * and format of the dma table. This will have to be fixed though. + */ + volatile struct dbdma_regs __iomem * dma_regs; + struct dbdma_cmd* dma_table_cpu; +#endif + +} pmac_ide_hwif_t; + +enum { + controller_ohare, /* OHare based */ + controller_heathrow, /* Heathrow/Paddington */ + controller_kl_ata3, /* KeyLargo ATA-3 */ + controller_kl_ata4, /* KeyLargo ATA-4 */ + controller_un_ata6, /* UniNorth2 ATA-6 */ + controller_k2_ata6, /* K2 ATA-6 */ + controller_sh_ata6, /* Shasta ATA-6 */ +}; + +static const char* model_name[] = { + "OHare ATA", /* OHare based */ + "Heathrow ATA", /* Heathrow/Paddington */ + "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */ + "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */ + "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */ + "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */ + "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */ +}; + +/* + * Extra registers, both 32-bit little-endian + */ +#define IDE_TIMING_CONFIG 0x200 +#define IDE_INTERRUPT 0x300 + +/* Kauai (U2) ATA has different register setup */ +#define IDE_KAUAI_PIO_CONFIG 0x200 +#define IDE_KAUAI_ULTRA_CONFIG 0x210 +#define IDE_KAUAI_POLL_CONFIG 0x220 + +/* + * Timing configuration register definitions + */ + +/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */ +#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS) +#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS) +#define IDE_SYSCLK_NS 30 /* 33Mhz cell */ +#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */ + +/* 133Mhz cell, found in shasta. + * See comments about 100 Mhz Uninorth 2... + * Note that PIO_MASK and MDMA_MASK seem to overlap + */ +#define TR_133_PIOREG_PIO_MASK 0xff000fff +#define TR_133_PIOREG_MDMA_MASK 0x00fff800 +#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff +#define TR_133_UDMAREG_UDMA_EN 0x00000001 + +/* 100Mhz cell, found in Uninorth 2. I don't have much infos about + * this one yet, it appears as a pci device (106b/0033) on uninorth + * internal PCI bus and it's clock is controlled like gem or fw. It + * appears to be an evolution of keylargo ATA4 with a timing register + * extended to 2 32bits registers and a similar DBDMA channel. Other + * registers seem to exist but I can't tell much about them. + * + * So far, I'm using pre-calculated tables for this extracted from + * the values used by the MacOS X driver. + * + * The "PIO" register controls PIO and MDMA timings, the "ULTRA" + * register controls the UDMA timings. At least, it seems bit 0 + * of this one enables UDMA vs. MDMA, and bits 4..7 are the + * cycle time in units of 10ns. Bits 8..15 are used by I don't + * know their meaning yet + */ +#define TR_100_PIOREG_PIO_MASK 0xff000fff +#define TR_100_PIOREG_MDMA_MASK 0x00fff000 +#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff +#define TR_100_UDMAREG_UDMA_EN 0x00000001 + + +/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on + * 40 connector cable and to 4 on 80 connector one. + * Clock unit is 15ns (66Mhz) + * + * 3 Values can be programmed: + * - Write data setup, which appears to match the cycle time. They + * also call it DIOW setup. + * - Ready to pause time (from spec) + * - Address setup. That one is weird. I don't see where exactly + * it fits in UDMA cycles, I got it's name from an obscure piece + * of commented out code in Darwin. They leave it to 0, we do as + * well, despite a comment that would lead to think it has a + * min value of 45ns. + * Apple also add 60ns to the write data setup (or cycle time ?) on + * reads. + */ +#define TR_66_UDMA_MASK 0xfff00000 +#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */ +#define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */ +#define TR_66_UDMA_ADDRSETUP_SHIFT 29 +#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */ +#define TR_66_UDMA_RDY2PAUS_SHIFT 25 +#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */ +#define TR_66_UDMA_WRDATASETUP_SHIFT 21 +#define TR_66_MDMA_MASK 0x000ffc00 +#define TR_66_MDMA_RECOVERY_MASK 0x000f8000 +#define TR_66_MDMA_RECOVERY_SHIFT 15 +#define TR_66_MDMA_ACCESS_MASK 0x00007c00 +#define TR_66_MDMA_ACCESS_SHIFT 10 +#define TR_66_PIO_MASK 0x000003ff +#define TR_66_PIO_RECOVERY_MASK 0x000003e0 +#define TR_66_PIO_RECOVERY_SHIFT 5 +#define TR_66_PIO_ACCESS_MASK 0x0000001f +#define TR_66_PIO_ACCESS_SHIFT 0 + +/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo + * Can do pio & mdma modes, clock unit is 30ns (33Mhz) + * + * The access time and recovery time can be programmed. Some older + * Darwin code base limit OHare to 150ns cycle time. I decided to do + * the same here fore safety against broken old hardware ;) + * The HalfTick bit, when set, adds half a clock (15ns) to the access + * time and removes one from recovery. It's not supported on KeyLargo + * implementation afaik. The E bit appears to be set for PIO mode 0 and + * is used to reach long timings used in this mode. + */ +#define TR_33_MDMA_MASK 0x003ff800 +#define TR_33_MDMA_RECOVERY_MASK 0x001f0000 +#define TR_33_MDMA_RECOVERY_SHIFT 16 +#define TR_33_MDMA_ACCESS_MASK 0x0000f800 +#define TR_33_MDMA_ACCESS_SHIFT 11 +#define TR_33_MDMA_HALFTICK 0x00200000 +#define TR_33_PIO_MASK 0x000007ff +#define TR_33_PIO_E 0x00000400 +#define TR_33_PIO_RECOVERY_MASK 0x000003e0 +#define TR_33_PIO_RECOVERY_SHIFT 5 +#define TR_33_PIO_ACCESS_MASK 0x0000001f +#define TR_33_PIO_ACCESS_SHIFT 0 + +/* + * Interrupt register definitions + */ +#define IDE_INTR_DMA 0x80000000 +#define IDE_INTR_DEVICE 0x40000000 + +/* + * FCR Register on Kauai. Not sure what bit 0x4 is ... + */ +#define KAUAI_FCR_UATA_MAGIC 0x00000004 +#define KAUAI_FCR_UATA_RESET_N 0x00000002 +#define KAUAI_FCR_UATA_ENABLE 0x00000001 + +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + +/* Rounded Multiword DMA timings + * + * I gave up finding a generic formula for all controller + * types and instead, built tables based on timing values + * used by Apple in Darwin's implementation. + */ +struct mdma_timings_t { + int accessTime; + int recoveryTime; + int cycleTime; +}; + +struct mdma_timings_t mdma_timings_33[] = +{ + { 240, 240, 480 }, + { 180, 180, 360 }, + { 135, 135, 270 }, + { 120, 120, 240 }, + { 105, 105, 210 }, + { 90, 90, 180 }, + { 75, 75, 150 }, + { 75, 45, 120 }, + { 0, 0, 0 } +}; + +struct mdma_timings_t mdma_timings_33k[] = +{ + { 240, 240, 480 }, + { 180, 180, 360 }, + { 150, 150, 300 }, + { 120, 120, 240 }, + { 90, 120, 210 }, + { 90, 90, 180 }, + { 90, 60, 150 }, + { 90, 30, 120 }, + { 0, 0, 0 } +}; + +struct mdma_timings_t mdma_timings_66[] = +{ + { 240, 240, 480 }, + { 180, 180, 360 }, + { 135, 135, 270 }, + { 120, 120, 240 }, + { 105, 105, 210 }, + { 90, 90, 180 }, + { 90, 75, 165 }, + { 75, 45, 120 }, + { 0, 0, 0 } +}; + +/* KeyLargo ATA-4 Ultra DMA timings (rounded) */ +struct { + int addrSetup; /* ??? */ + int rdy2pause; + int wrDataSetup; +} kl66_udma_timings[] = +{ + { 0, 180, 120 }, /* Mode 0 */ + { 0, 150, 90 }, /* 1 */ + { 0, 120, 60 }, /* 2 */ + { 0, 90, 45 }, /* 3 */ + { 0, 90, 30 } /* 4 */ +}; + +/* UniNorth 2 ATA/100 timings */ +struct kauai_timing { + int cycle_time; + u32 timing_reg; +}; + +static struct kauai_timing kauai_pio_timings[] = +{ + { 930 , 0x08000fff }, + { 600 , 0x08000a92 }, + { 383 , 0x0800060f }, + { 360 , 0x08000492 }, + { 330 , 0x0800048f }, + { 300 , 0x080003cf }, + { 270 , 0x080003cc }, + { 240 , 0x0800038b }, + { 239 , 0x0800030c }, + { 180 , 0x05000249 }, + { 120 , 0x04000148 }, + { 0 , 0 }, +}; + +static struct kauai_timing kauai_mdma_timings[] = +{ + { 1260 , 0x00fff000 }, + { 480 , 0x00618000 }, + { 360 , 0x00492000 }, + { 270 , 0x0038e000 }, + { 240 , 0x0030c000 }, + { 210 , 0x002cb000 }, + { 180 , 0x00249000 }, + { 150 , 0x00209000 }, + { 120 , 0x00148000 }, + { 0 , 0 }, +}; + +static struct kauai_timing kauai_udma_timings[] = +{ + { 120 , 0x000070c0 }, + { 90 , 0x00005d80 }, + { 60 , 0x00004a60 }, + { 45 , 0x00003a50 }, + { 30 , 0x00002a30 }, + { 20 , 0x00002921 }, + { 0 , 0 }, +}; + +static struct kauai_timing shasta_pio_timings[] = +{ + { 930 , 0x08000fff }, + { 600 , 0x0A000c97 }, + { 383 , 0x07000712 }, + { 360 , 0x040003cd }, + { 330 , 0x040003cd }, + { 300 , 0x040003cd }, + { 270 , 0x040003cd }, + { 240 , 0x040003cd }, + { 239 , 0x040003cd }, + { 180 , 0x0400028b }, + { 120 , 0x0400010a }, + { 0 , 0 }, +}; + +static struct kauai_timing shasta_mdma_timings[] = +{ + { 1260 , 0x00fff000 }, + { 480 , 0x00820800 }, + { 360 , 0x00820800 }, + { 270 , 0x00820800 }, + { 240 , 0x00820800 }, + { 210 , 0x00820800 }, + { 180 , 0x00820800 }, + { 150 , 0x0028b000 }, + { 120 , 0x001ca000 }, + { 0 , 0 }, +}; + +static struct kauai_timing shasta_udma133_timings[] = +{ + { 120 , 0x00035901, }, + { 90 , 0x000348b1, }, + { 60 , 0x00033881, }, + { 45 , 0x00033861, }, + { 30 , 0x00033841, }, + { 20 , 0x00033031, }, + { 15 , 0x00033021, }, + { 0 , 0 }, +}; + + +static inline u32 +kauai_lookup_timing(struct kauai_timing* table, int cycle_time) +{ + int i; + + for (i=0; table[i].cycle_time; i++) + if (cycle_time > table[i+1].cycle_time) + return table[i].timing_reg; + BUG(); + return 0; +} + +/* allow up to 256 DBDMA commands per xfer */ +#define MAX_DCMDS 256 + +/* + * Wait 1s for disk to answer on IDE bus after a hard reset + * of the device (via GPIO/FCR). + * + * Some devices seem to "pollute" the bus even after dropping + * the BSY bit (typically some combo drives slave on the UDMA + * bus) after a hard reset. Since we hard reset all drives on + * KeyLargo ATA66, we have to keep that delay around. I may end + * up not hard resetting anymore on these and keep the delay only + * for older interfaces instead (we have to reset when coming + * from MacOS...) --BenH. + */ +#define IDE_WAKEUP_DELAY (1*HZ) + +static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *); +static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); +static void pmac_ide_selectproc(ide_drive_t *drive); +static void pmac_ide_kauai_selectproc(ide_drive_t *drive); + +#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + +#define PMAC_IDE_REG(x) \ + ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) + +/* + * Apply the timings of the proper unit (master/slave) to the shared + * timing register when selecting that unit. This version is for + * ASICs with a single timing register + */ +static void +pmac_ide_selectproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + + if (drive->dn & 1) + writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG)); + else + writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG)); + (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); +} + +/* + * Apply the timings of the proper unit (master/slave) to the shared + * timing register when selecting that unit. This version is for + * ASICs with a dual timing register (Kauai) + */ +static void +pmac_ide_kauai_selectproc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + + if (drive->dn & 1) { + writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); + writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG)); + } else { + writel(pmif->timings[0], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); + writel(pmif->timings[2], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG)); + } + (void)readl(PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG)); +} + +/* + * Force an update of controller timing values for a given drive + */ +static void +pmac_ide_do_update_timings(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + + if (pmif->kind == controller_sh_ata6 || + pmif->kind == controller_un_ata6 || + pmif->kind == controller_k2_ata6) + pmac_ide_kauai_selectproc(drive); + else + pmac_ide_selectproc(drive); +} + +static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) +{ + writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); + (void)readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); +} + +static void pmac_set_irq(ide_hwif_t *hwif, int on) +{ + u8 ctl = ATA_DEVCTL_OBS; + + if (on == 4) { /* hack for SRST */ + ctl |= 4; + on &= ~4; + } + + ctl |= on ? 0 : 2; + + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); + (void)readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); +} + +/* + * Old tuning functions (called on hdparm -p), sets up drive PIO timings + */ +static void +pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); + u32 *timings, t; + unsigned accessTicks, recTicks; + unsigned accessTime, recTime; + unsigned int cycle_time; + + /* which drive is it ? */ + timings = &pmif->timings[drive->dn & 1]; + t = *timings; + + cycle_time = ide_pio_cycle_time(drive, pio); + + switch (pmif->kind) { + case controller_sh_ata6: { + /* 133Mhz cell */ + u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time); + t = (t & ~TR_133_PIOREG_PIO_MASK) | tr; + break; + } + case controller_un_ata6: + case controller_k2_ata6: { + /* 100Mhz cell */ + u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time); + t = (t & ~TR_100_PIOREG_PIO_MASK) | tr; + break; + } + case controller_kl_ata4: + /* 66Mhz cell */ + recTime = cycle_time - tim->active - tim->setup; + recTime = max(recTime, 150U); + accessTime = tim->active; + accessTime = max(accessTime, 150U); + accessTicks = SYSCLK_TICKS_66(accessTime); + accessTicks = min(accessTicks, 0x1fU); + recTicks = SYSCLK_TICKS_66(recTime); + recTicks = min(recTicks, 0x1fU); + t = (t & ~TR_66_PIO_MASK) | + (accessTicks << TR_66_PIO_ACCESS_SHIFT) | + (recTicks << TR_66_PIO_RECOVERY_SHIFT); + break; + default: { + /* 33Mhz cell */ + int ebit = 0; + recTime = cycle_time - tim->active - tim->setup; + recTime = max(recTime, 150U); + accessTime = tim->active; + accessTime = max(accessTime, 150U); + accessTicks = SYSCLK_TICKS(accessTime); + accessTicks = min(accessTicks, 0x1fU); + accessTicks = max(accessTicks, 4U); + recTicks = SYSCLK_TICKS(recTime); + recTicks = min(recTicks, 0x1fU); + recTicks = max(recTicks, 5U) - 4; + if (recTicks > 9) { + recTicks--; /* guess, but it's only for PIO0, so... */ + ebit = 1; + } + t = (t & ~TR_33_PIO_MASK) | + (accessTicks << TR_33_PIO_ACCESS_SHIFT) | + (recTicks << TR_33_PIO_RECOVERY_SHIFT); + if (ebit) + t |= TR_33_PIO_E; + break; + } + } + +#ifdef IDE_PMAC_DEBUG + printk(KERN_ERR "%s: Set PIO timing for mode %d, reg: 0x%08x\n", + drive->name, pio, *timings); +#endif + + *timings = t; + pmac_ide_do_update_timings(drive); +} + +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + +/* + * Calculate KeyLargo ATA/66 UDMA timings + */ +static int +set_timings_udma_ata4(u32 *timings, u8 speed) +{ + unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks; + + if (speed > XFER_UDMA_4) + return 1; + + rdyToPauseTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].rdy2pause); + wrDataSetupTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].wrDataSetup); + addrTicks = SYSCLK_TICKS_66(kl66_udma_timings[speed & 0xf].addrSetup); + + *timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) | + (wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) | + (rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) | + (addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) | + TR_66_UDMA_EN; +#ifdef IDE_PMAC_DEBUG + printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n", + speed & 0xf, *timings); +#endif + + return 0; +} + +/* + * Calculate Kauai ATA/100 UDMA timings + */ +static int +set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed) +{ + struct ide_timing *t = ide_timing_find_mode(speed); + u32 tr; + + if (speed > XFER_UDMA_5 || t == NULL) + return 1; + tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma); + *ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr; + *ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN; + + return 0; +} + +/* + * Calculate Shasta ATA/133 UDMA timings + */ +static int +set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed) +{ + struct ide_timing *t = ide_timing_find_mode(speed); + u32 tr; + + if (speed > XFER_UDMA_6 || t == NULL) + return 1; + tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma); + *ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr; + *ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN; + + return 0; +} + +/* + * Calculate MDMA timings for all cells + */ +static void +set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, + u8 speed) +{ + u16 *id = drive->id; + int cycleTime, accessTime = 0, recTime = 0; + unsigned accessTicks, recTicks; + struct mdma_timings_t* tm = NULL; + int i; + + /* Get default cycle time for mode */ + switch(speed & 0xf) { + case 0: cycleTime = 480; break; + case 1: cycleTime = 150; break; + case 2: cycleTime = 120; break; + default: + BUG(); + break; + } + + /* Check if drive provides explicit DMA cycle time */ + if ((id[ATA_ID_FIELD_VALID] & 2) && id[ATA_ID_EIDE_DMA_TIME]) + cycleTime = max_t(int, id[ATA_ID_EIDE_DMA_TIME], cycleTime); + + /* OHare limits according to some old Apple sources */ + if ((intf_type == controller_ohare) && (cycleTime < 150)) + cycleTime = 150; + /* Get the proper timing array for this controller */ + switch(intf_type) { + case controller_sh_ata6: + case controller_un_ata6: + case controller_k2_ata6: + break; + case controller_kl_ata4: + tm = mdma_timings_66; + break; + case controller_kl_ata3: + tm = mdma_timings_33k; + break; + default: + tm = mdma_timings_33; + break; + } + if (tm != NULL) { + /* Lookup matching access & recovery times */ + i = -1; + for (;;) { + if (tm[i+1].cycleTime < cycleTime) + break; + i++; + } + cycleTime = tm[i].cycleTime; + accessTime = tm[i].accessTime; + recTime = tm[i].recoveryTime; + +#ifdef IDE_PMAC_DEBUG + printk(KERN_ERR "%s: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n", + drive->name, cycleTime, accessTime, recTime); +#endif + } + switch(intf_type) { + case controller_sh_ata6: { + /* 133Mhz cell */ + u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime); + *timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr; + *timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN; + } + case controller_un_ata6: + case controller_k2_ata6: { + /* 100Mhz cell */ + u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime); + *timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr; + *timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN; + } + break; + case controller_kl_ata4: + /* 66Mhz cell */ + accessTicks = SYSCLK_TICKS_66(accessTime); + accessTicks = min(accessTicks, 0x1fU); + accessTicks = max(accessTicks, 0x1U); + recTicks = SYSCLK_TICKS_66(recTime); + recTicks = min(recTicks, 0x1fU); + recTicks = max(recTicks, 0x3U); + /* Clear out mdma bits and disable udma */ + *timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) | + (accessTicks << TR_66_MDMA_ACCESS_SHIFT) | + (recTicks << TR_66_MDMA_RECOVERY_SHIFT); + break; + case controller_kl_ata3: + /* 33Mhz cell on KeyLargo */ + accessTicks = SYSCLK_TICKS(accessTime); + accessTicks = max(accessTicks, 1U); + accessTicks = min(accessTicks, 0x1fU); + accessTime = accessTicks * IDE_SYSCLK_NS; + recTicks = SYSCLK_TICKS(recTime); + recTicks = max(recTicks, 1U); + recTicks = min(recTicks, 0x1fU); + *timings = ((*timings) & ~TR_33_MDMA_MASK) | + (accessTicks << TR_33_MDMA_ACCESS_SHIFT) | + (recTicks << TR_33_MDMA_RECOVERY_SHIFT); + break; + default: { + /* 33Mhz cell on others */ + int halfTick = 0; + int origAccessTime = accessTime; + int origRecTime = recTime; + + accessTicks = SYSCLK_TICKS(accessTime); + accessTicks = max(accessTicks, 1U); + accessTicks = min(accessTicks, 0x1fU); + accessTime = accessTicks * IDE_SYSCLK_NS; + recTicks = SYSCLK_TICKS(recTime); + recTicks = max(recTicks, 2U) - 1; + recTicks = min(recTicks, 0x1fU); + recTime = (recTicks + 1) * IDE_SYSCLK_NS; + if ((accessTicks > 1) && + ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) && + ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) { + halfTick = 1; + accessTicks--; + } + *timings = ((*timings) & ~TR_33_MDMA_MASK) | + (accessTicks << TR_33_MDMA_ACCESS_SHIFT) | + (recTicks << TR_33_MDMA_RECOVERY_SHIFT); + if (halfTick) + *timings |= TR_33_MDMA_HALFTICK; + } + } +#ifdef IDE_PMAC_DEBUG + printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n", + drive->name, speed & 0xf, *timings); +#endif +} +#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ + +static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + int ret = 0; + u32 *timings, *timings2, tl[2]; + u8 unit = drive->dn & 1; + + timings = &pmif->timings[unit]; + timings2 = &pmif->timings[unit+2]; + + /* Copy timings to local image */ + tl[0] = *timings; + tl[1] = *timings2; + +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (speed >= XFER_UDMA_0) { + if (pmif->kind == controller_kl_ata4) + ret = set_timings_udma_ata4(&tl[0], speed); + else if (pmif->kind == controller_un_ata6 + || pmif->kind == controller_k2_ata6) + ret = set_timings_udma_ata6(&tl[0], &tl[1], speed); + else if (pmif->kind == controller_sh_ata6) + ret = set_timings_udma_shasta(&tl[0], &tl[1], speed); + else + ret = -1; + } else + set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); +#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (ret) + return; + + /* Apply timings to controller */ + *timings = tl[0]; + *timings2 = tl[1]; + + pmac_ide_do_update_timings(drive); +} + +/* + * Blast some well known "safe" values to the timing registers at init or + * wakeup from sleep time, before we do real calculation + */ +static void +sanitize_timings(pmac_ide_hwif_t *pmif) +{ + unsigned int value, value2 = 0; + + switch(pmif->kind) { + case controller_sh_ata6: + value = 0x0a820c97; + value2 = 0x00033031; + break; + case controller_un_ata6: + case controller_k2_ata6: + value = 0x08618a92; + value2 = 0x00002921; + break; + case controller_kl_ata4: + value = 0x0008438c; + break; + case controller_kl_ata3: + value = 0x00084526; + break; + case controller_heathrow: + case controller_ohare: + default: + value = 0x00074526; + break; + } + pmif->timings[0] = pmif->timings[1] = value; + pmif->timings[2] = pmif->timings[3] = value2; +} + +/* Suspend call back, should be called after the child devices + * have actually been suspended + */ +static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) +{ + /* We clear the timings */ + pmif->timings[0] = 0; + pmif->timings[1] = 0; + + disable_irq(pmif->irq); + + /* The media bay will handle itself just fine */ + if (pmif->mediabay) + return 0; + + /* Kauai has bus control FCRs directly here */ + if (pmif->kauai_fcr) { + u32 fcr = readl(pmif->kauai_fcr); + fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE); + writel(fcr, pmif->kauai_fcr); + } + + /* Disable the bus on older machines and the cell on kauai */ + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, + 0); + + return 0; +} + +/* Resume call back, should be called before the child devices + * are resumed + */ +static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) +{ + /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ + if (!pmif->mediabay) { + ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1); + msleep(10); + ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 0); + + /* Kauai has it different */ + if (pmif->kauai_fcr) { + u32 fcr = readl(pmif->kauai_fcr); + fcr |= KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE; + writel(fcr, pmif->kauai_fcr); + } + + msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); + } + + /* Sanitize drive timings */ + sanitize_timings(pmif); + + enable_irq(pmif->irq); + + return 0; +} + +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + +static void pmac_ide_init_dev(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + + if (pmif->mediabay) { +#ifdef CONFIG_PMAC_MEDIABAY + if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + drive->dev_flags &= ~IDE_DFLAG_NOPROBE; + return; + } +#endif + drive->dev_flags |= IDE_DFLAG_NOPROBE; + } +} + +static const struct ide_tp_ops pmac_tp_ops = { + .exec_command = pmac_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .read_sff_dma_status = ide_read_sff_dma_status, + + .set_irq = pmac_set_irq, + + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + +static const struct ide_port_ops pmac_ide_ata6_port_ops = { + .init_dev = pmac_ide_init_dev, + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .init_dev = pmac_ide_init_dev, + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_port_ops = { + .init_dev = pmac_ide_init_dev, + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, +}; + +static const struct ide_dma_ops pmac_dma_ops; + +static const struct ide_port_info pmac_port_info = { + .name = DRV_NAME, + .init_dma = pmac_ide_init_dma, + .chipset = ide_pmac, + .tp_ops = &pmac_tp_ops, + .port_ops = &pmac_ide_port_ops, +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + .dma_ops = &pmac_dma_ops, +#endif + .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_MMIO | + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, +}; + +/* + * Setup, register & probe an IDE channel driven by this driver, this is + * called by one of the 2 probe functions (macio or PCI). + */ +static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) +{ + struct device_node *np = pmif->node; + const int *bidp; + struct ide_host *host; + ide_hwif_t *hwif; + hw_regs_t *hws[] = { hw, NULL, NULL, NULL }; + struct ide_port_info d = pmac_port_info; + int rc; + + pmif->broken_dma = pmif->broken_dma_warn = 0; + if (of_device_is_compatible(np, "shasta-ata")) { + pmif->kind = controller_sh_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; + d.udma_mask = ATA_UDMA6; + } else if (of_device_is_compatible(np, "kauai-ata")) { + pmif->kind = controller_un_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "K2-UATA")) { + pmif->kind = controller_k2_ata6; + d.port_ops = &pmac_ide_ata6_port_ops; + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "keylargo-ata")) { + if (strcmp(np->name, "ata-4") == 0) { + pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; + d.udma_mask = ATA_UDMA4; + } else + pmif->kind = controller_kl_ata3; + } else if (of_device_is_compatible(np, "heathrow-ata")) { + pmif->kind = controller_heathrow; + } else { + pmif->kind = controller_ohare; + pmif->broken_dma = 1; + } + + bidp = of_get_property(np, "AAPL,bus-id", NULL); + pmif->aapl_bus_id = bidp ? *bidp : 0; + + /* On Kauai-type controllers, we make sure the FCR is correct */ + if (pmif->kauai_fcr) + writel(KAUAI_FCR_UATA_MAGIC | + KAUAI_FCR_UATA_RESET_N | + KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr); + + pmif->mediabay = 0; + + /* Make sure we have sane timings */ + sanitize_timings(pmif); + + host = ide_host_alloc(&d, hws); + if (host == NULL) + return -ENOMEM; + hwif = host->ports[0]; + +#ifndef CONFIG_PPC64 + /* XXX FIXME: Media bay stuff need re-organizing */ + if (np->parent && np->parent->name + && strcasecmp(np->parent->name, "media-bay") == 0) { +#ifdef CONFIG_PMAC_MEDIABAY + media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, + hwif); +#endif /* CONFIG_PMAC_MEDIABAY */ + pmif->mediabay = 1; + if (!bidp) + pmif->aapl_bus_id = 1; + } else if (pmif->kind == controller_ohare) { + /* The code below is having trouble on some ohare machines + * (timing related ?). Until I can put my hand on one of these + * units, I keep the old way + */ + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1); + } else +#endif + { + /* This is necessary to enable IDE when net-booting */ + ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1); + ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1); + msleep(10); + ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0); + msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); + } + + printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + pmif->mediabay ? " (mediabay)" : "", hw->irq); + + rc = ide_host_register(host, &d, hws); + if (rc) { + ide_host_free(host); + return rc; + } + + return 0; +} + +static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base) +{ + int i; + + for (i = 0; i < 8; ++i) + hw->io_ports_array[i] = base + i * 0x10; + + hw->io_ports.ctl_addr = base + 0x160; +} + +/* + * Attach to a macio probed interface + */ +static int __devinit +pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) +{ + void __iomem *base; + unsigned long regbase; + pmac_ide_hwif_t *pmif; + int irq, rc; + hw_regs_t hw; + + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + if (macio_resource_count(mdev) == 0) { + printk(KERN_WARNING "ide-pmac: no address for %s\n", + mdev->ofdev.node->full_name); + rc = -ENXIO; + goto out_free_pmif; + } + + /* Request memory resource for IO ports */ + if (macio_request_resource(mdev, 0, "ide-pmac (ports)")) { + printk(KERN_ERR "ide-pmac: can't request MMIO resource for " + "%s!\n", mdev->ofdev.node->full_name); + rc = -EBUSY; + goto out_free_pmif; + } + + /* XXX This is bogus. Should be fixed in the registry by checking + * the kind of host interrupt controller, a bit like gatwick + * fixes in irq.c. That works well enough for the single case + * where that happens though... + */ + if (macio_irq_count(mdev) == 0) { + printk(KERN_WARNING "ide-pmac: no intrs for device %s, using " + "13\n", mdev->ofdev.node->full_name); + irq = irq_create_mapping(NULL, 13); + } else + irq = macio_irq(mdev, 0); + + base = ioremap(macio_resource_start(mdev, 0), 0x400); + regbase = (unsigned long) base; + + pmif->mdev = mdev; + pmif->node = mdev->ofdev.node; + pmif->regbase = regbase; + pmif->irq = irq; + pmif->kauai_fcr = NULL; +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (macio_resource_count(mdev) >= 2) { + if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) + printk(KERN_WARNING "ide-pmac: can't request DMA " + "resource for %s!\n", + mdev->ofdev.node->full_name); + else + pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); + } else + pmif->dma_regs = NULL; +#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + dev_set_drvdata(&mdev->ofdev.dev, pmif); + + memset(&hw, 0, sizeof(hw)); + pmac_ide_init_ports(&hw, pmif->regbase); + hw.irq = irq; + hw.dev = &mdev->bus->pdev->dev; + hw.parent = &mdev->ofdev.dev; + + rc = pmac_ide_setup_device(pmif, &hw); + if (rc != 0) { + /* The inteface is released to the common IDE layer */ + dev_set_drvdata(&mdev->ofdev.dev, NULL); + iounmap(base); + if (pmif->dma_regs) { + iounmap(pmif->dma_regs); + macio_release_resource(mdev, 1); + } + macio_release_resource(mdev, 0); + kfree(pmif); + } + + return rc; + +out_free_pmif: + kfree(pmif); + return rc; +} + +static int +pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + int rc = 0; + + if (mesg.event != mdev->ofdev.dev.power.power_state.event + && (mesg.event & PM_EVENT_SLEEP)) { + rc = pmac_ide_do_suspend(pmif); + if (rc == 0) + mdev->ofdev.dev.power.power_state = mesg; + } + + return rc; +} + +static int +pmac_ide_macio_resume(struct macio_dev *mdev) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + int rc = 0; + + if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { + rc = pmac_ide_do_resume(pmif); + if (rc == 0) + mdev->ofdev.dev.power.power_state = PMSG_ON; + } + + return rc; +} + +/* + * Attach to a PCI probed interface + */ +static int __devinit +pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct device_node *np; + pmac_ide_hwif_t *pmif; + void __iomem *base; + unsigned long rbase, rlen; + int rc; + hw_regs_t hw; + + np = pci_device_to_OF_node(pdev); + if (np == NULL) { + printk(KERN_ERR "ide-pmac: cannot find MacIO node for Kauai ATA interface\n"); + return -ENODEV; + } + + pmif = kzalloc(sizeof(*pmif), GFP_KERNEL); + if (pmif == NULL) + return -ENOMEM; + + if (pci_enable_device(pdev)) { + printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; + } + pci_set_master(pdev); + + if (pci_request_regions(pdev, "Kauai ATA")) { + printk(KERN_ERR "ide-pmac: Cannot obtain PCI resources for " + "%s\n", np->full_name); + rc = -ENXIO; + goto out_free_pmif; + } + + pmif->mdev = NULL; + pmif->node = np; + + rbase = pci_resource_start(pdev, 0); + rlen = pci_resource_len(pdev, 0); + + base = ioremap(rbase, rlen); + pmif->regbase = (unsigned long) base + 0x2000; +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + pmif->dma_regs = base + 0x1000; +#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + pmif->kauai_fcr = base; + pmif->irq = pdev->irq; + + pci_set_drvdata(pdev, pmif); + + memset(&hw, 0, sizeof(hw)); + pmac_ide_init_ports(&hw, pmif->regbase); + hw.irq = pdev->irq; + hw.dev = &pdev->dev; + + rc = pmac_ide_setup_device(pmif, &hw); + if (rc != 0) { + /* The inteface is released to the common IDE layer */ + pci_set_drvdata(pdev, NULL); + iounmap(base); + pci_release_regions(pdev); + kfree(pmif); + } + + return rc; + +out_free_pmif: + kfree(pmif); + return rc; +} + +static int +pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + int rc = 0; + + if (mesg.event != pdev->dev.power.power_state.event + && (mesg.event & PM_EVENT_SLEEP)) { + rc = pmac_ide_do_suspend(pmif); + if (rc == 0) + pdev->dev.power.power_state = mesg; + } + + return rc; +} + +static int +pmac_ide_pci_resume(struct pci_dev *pdev) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + int rc = 0; + + if (pdev->dev.power.power_state.event != PM_EVENT_ON) { + rc = pmac_ide_do_resume(pmif); + if (rc == 0) + pdev->dev.power.power_state = PMSG_ON; + } + + return rc; +} + +static struct of_device_id pmac_ide_macio_match[] = +{ + { + .name = "IDE", + }, + { + .name = "ATA", + }, + { + .type = "ide", + }, + { + .type = "ata", + }, + {}, +}; + +static struct macio_driver pmac_ide_macio_driver = +{ + .name = "ide-pmac", + .match_table = pmac_ide_macio_match, + .probe = pmac_ide_macio_attach, + .suspend = pmac_ide_macio_suspend, + .resume = pmac_ide_macio_resume, +}; + +static const struct pci_device_id pmac_ide_pci_match[] = { + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 }, + { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 }, + {}, +}; + +static struct pci_driver pmac_ide_pci_driver = { + .name = "ide-pmac", + .id_table = pmac_ide_pci_match, + .probe = pmac_ide_pci_attach, + .suspend = pmac_ide_pci_suspend, + .resume = pmac_ide_pci_resume, +}; +MODULE_DEVICE_TABLE(pci, pmac_ide_pci_match); + +int __init pmac_ide_probe(void) +{ + int error; + + if (!machine_is(powermac)) + return -ENODEV; + +#ifdef CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST + error = pci_register_driver(&pmac_ide_pci_driver); + if (error) + goto out; + error = macio_register_driver(&pmac_ide_macio_driver); + if (error) { + pci_unregister_driver(&pmac_ide_pci_driver); + goto out; + } +#else + error = macio_register_driver(&pmac_ide_macio_driver); + if (error) + goto out; + error = pci_register_driver(&pmac_ide_pci_driver); + if (error) { + macio_unregister_driver(&pmac_ide_macio_driver); + goto out; + } +#endif +out: + return error; +} + +#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + +/* + * pmac_ide_build_dmatable builds the DBDMA command list + * for a transfer and sets the DBDMA channel to point to it. + */ +static int +pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct dbdma_cmd *table; + int i, count = 0; + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; + struct scatterlist *sg; + int wr = (rq_data_dir(rq) == WRITE); + + /* DMA table is already aligned */ + table = (struct dbdma_cmd *) pmif->dma_table_cpu; + + /* Make sure DMA controller is stopped (necessary ?) */ + writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma->control); + while (readl(&dma->status) & RUN) + udelay(1); + + hwif->sg_nents = i = ide_build_sglist(drive, rq); + + if (!i) + return 0; + + /* Build DBDMA commands list */ + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + u32 cur_addr; + u32 cur_len; + + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + if (pmif->broken_dma && cur_addr & (L1_CACHE_BYTES - 1)) { + if (pmif->broken_dma_warn == 0) { + printk(KERN_WARNING "%s: DMA on non aligned address, " + "switching to PIO on Ohare chipset\n", drive->name); + pmif->broken_dma_warn = 1; + } + goto use_pio_instead; + } + while (cur_len) { + unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; + + if (count++ >= MAX_DCMDS) { + printk(KERN_WARNING "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } + st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE); + st_le16(&table->req_count, tc); + st_le32(&table->phy_addr, cur_addr); + table->cmd_dep = 0; + table->xfer_status = 0; + table->res_count = 0; + cur_addr += tc; + cur_len -= tc; + ++table; + } + sg = sg_next(sg); + i--; + } + + /* convert the last command to an input/output last command */ + if (count) { + st_le16(&table[-1].command, wr? OUTPUT_LAST: INPUT_LAST); + /* add the stop command to the end of the list */ + memset(table, 0, sizeof(struct dbdma_cmd)); + st_le16(&table->command, DBDMA_STOP); + mb(); + writel(hwif->dmatable_dma, &dma->cmdptr); + return 1; + } + + printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name); + +use_pio_instead: + ide_destroy_dmatable(drive); + + return 0; /* revert to PIO for this request */ +} + +/* + * Prepare a DMA transfer. We build the DMA table, adjust the timings for + * a read on KeyLargo ATA/66 and mark us as waiting for DMA completion + */ +static int +pmac_ide_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct request *rq = HWGROUP(drive)->rq; + u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4); + + if (!pmac_ide_build_dmatable(drive, rq)) { + ide_map_sg(drive, rq); + return 1; + } + + /* Apple adds 60ns to wrDataSetup on reads */ + if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) { + writel(pmif->timings[unit] + (!rq_data_dir(rq) ? 0x00800000UL : 0), + PMAC_IDE_REG(IDE_TIMING_CONFIG)); + (void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); + } + + drive->waiting_for_dma = 1; + + return 0; +} + +static void +pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + /* issue cmd to drive */ + ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, NULL); +} + +/* + * Kick the DMA controller into life after the DMA command has been issued + * to the drive. + */ +static void +pmac_ide_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + volatile struct dbdma_regs __iomem *dma; + + dma = pmif->dma_regs; + + writel((RUN << 16) | RUN, &dma->control); + /* Make sure it gets to the controller right now */ + (void)readl(&dma->control); +} + +/* + * After a DMA transfer, make sure the controller is stopped + */ +static int +pmac_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; + u32 dstat; + + drive->waiting_for_dma = 0; + dstat = readl(&dma->status); + writel(((RUN|WAKE|DEAD) << 16), &dma->control); + + ide_destroy_dmatable(drive); + + /* verify good dma status. we don't check for ACTIVE beeing 0. We should... + * in theory, but with ATAPI decices doing buffer underruns, that would + * cause us to disable DMA, which isn't what we want + */ + return (dstat & (RUN|DEAD)) != RUN; +} + +/* + * Check out that the interrupt we got was for us. We can't always know this + * for sure with those Apple interfaces (well, we could on the recent ones but + * that's not implemented yet), on the other hand, we don't have shared interrupts + * so it's not really a problem + */ +static int +pmac_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; + unsigned long status, timeout; + + /* We have to things to deal with here: + * + * - The dbdma won't stop if the command was started + * but completed with an error without transferring all + * datas. This happens when bad blocks are met during + * a multi-block transfer. + * + * - The dbdma fifo hasn't yet finished flushing to + * to system memory when the disk interrupt occurs. + * + */ + + /* If ACTIVE is cleared, the STOP command have passed and + * transfer is complete. + */ + status = readl(&dma->status); + if (!(status & ACTIVE)) + return 1; + + /* If dbdma didn't execute the STOP command yet, the + * active bit is still set. We consider that we aren't + * sharing interrupts (which is hopefully the case with + * those controllers) and so we just try to flush the + * channel for pending data in the fifo + */ + udelay(1); + writel((FLUSH << 16) | FLUSH, &dma->control); + timeout = 0; + for (;;) { + udelay(1); + status = readl(&dma->status); + if ((status & FLUSH) == 0) + break; + if (++timeout > 100) { + printk(KERN_WARNING "ide%d, ide_dma_test_irq \ + timeout flushing channel\n", HWIF(drive)->index); + break; + } + } + return 1; +} + +static void pmac_ide_dma_host_set(ide_drive_t *drive, int on) +{ +} + +static void +pmac_ide_dma_lost_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; + unsigned long status = readl(&dma->status); + + printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status); +} + +static const struct ide_dma_ops pmac_dma_ops = { + .dma_host_set = pmac_ide_dma_host_set, + .dma_setup = pmac_ide_dma_setup, + .dma_exec_cmd = pmac_ide_dma_exec_cmd, + .dma_start = pmac_ide_dma_start, + .dma_end = pmac_ide_dma_end, + .dma_test_irq = pmac_ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = pmac_ide_dma_lost_irq, +}; + +/* + * Allocate the data structures needed for using DMA with an interface + * and fill the proper list of functions pointers + */ +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct pci_dev *dev = to_pci_dev(hwif->dev); + + /* We won't need pci_dev if we switch to generic consistent + * DMA routines ... + */ + if (dev == NULL || pmif->dma_regs == 0) + return -ENODEV; + /* + * Allocate space for the DBDMA commands. + * The +2 is +1 for the stop command and +1 to allow for + * aligning the start address to a multiple of 16 bytes. + */ + pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent( + dev, + (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), + &hwif->dmatable_dma); + if (pmif->dma_table_cpu == NULL) { + printk(KERN_ERR "%s: unable to allocate DMA command list\n", + hwif->name); + return -ENOMEM; + } + + hwif->sg_max_nents = MAX_DCMDS; + + return 0; +} +#else +static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) +{ + return -EOPNOTSUPP; +} +#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + +module_init(pmac_ide_probe); + +MODULE_LICENSE("GPL"); |