Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...

7 files changed, 753 insertions, 5 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index aa037fe..0426630 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -327,6 +327,16 @@ config KEYBOARD_NEWTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called newtonkbd.
 
+config KEYBOARD_NOMADIK
+	tristate "ST-Ericsson Nomadik SKE keyboard"
+	depends on PLAT_NOMADIK
+	help
+	  Say Y here if you want to use a keypad provided on the SKE controller
+	  used on the Ux500 and Nomadik platforms
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nmk-ske-keypad.
+
 config KEYBOARD_OPENCORES
 	tristate "OpenCores Keyboard Controller"
 	help
@@ -424,6 +434,15 @@ config KEYBOARD_OMAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-keypad.
 
+config KEYBOARD_OMAP4
+	tristate "TI OMAP4 keypad support"
+	depends on ARCH_OMAP4
+	help
+	  Say Y here if you want to use the OMAP4 keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called omap4-keypad.
+
 config KEYBOARD_TWL4030
 	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 	depends on TWL4030_CORE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 504b591..c13809c 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,7 +28,9 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
+obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index d6918cb..b92d1cd 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -660,7 +660,7 @@ static const struct dev_pm_ops adp5588_dev_pm_ops = {
 #endif
 
 static const struct i2c_device_id adp5588_id[] = {
-	{ KBUILD_MODNAME, 0 },
+	{ "adp5588-keys", 0 },
 	{ "adp5587-keys", 0 },
 	{ }
 };
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 19fa94a..fed31e0 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -570,6 +570,8 @@ static struct serio_device_id hil_dev_ids[] = {
 	{ 0 }
 };
 
+MODULE_DEVICE_TABLE(serio, hil_dev_ids);
+
 static struct serio_driver hil_serio_drv = {
 	.driver		= {
 		.name	= "hil_dev",
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
new file mode 100644
index 0000000..6e0f230
--- /dev/null
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * License terms:GNU General Public License (GPL) version 2
+ *
+ * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
+ * the Nomadik 8815 and Ux500 platforms.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <plat/ske.h>
+
+/* SKE_CR bits */
+#define SKE_KPMLT	(0x1 << 6)
+#define SKE_KPCN	(0x7 << 3)
+#define SKE_KPASEN	(0x1 << 2)
+#define SKE_KPASON	(0x1 << 7)
+
+/* SKE_IMSC bits */
+#define SKE_KPIMA	(0x1 << 2)
+
+/* SKE_ICR bits */
+#define SKE_KPICS	(0x1 << 3)
+#define SKE_KPICA	(0x1 << 2)
+
+/* SKE_RIS bits */
+#define SKE_KPRISA	(0x1 << 2)
+
+#define SKE_KEYPAD_ROW_SHIFT	3
+#define SKE_KPD_KEYMAP_SIZE	(8 * 8)
+
+/* keypad auto scan registers */
+#define SKE_ASR0	0x20
+#define SKE_ASR1	0x24
+#define SKE_ASR2	0x28
+#define SKE_ASR3	0x2C
+
+#define SKE_NUM_ASRX_REGISTERS	(4)
+
+/**
+ * struct ske_keypad  - data structure used by keypad driver
+ * @irq:	irq no
+ * @reg_base:	ske regsiters base address
+ * @input:	pointer to input device object
+ * @board:	keypad platform device
+ * @keymap:	matrix scan code table for keycodes
+ * @clk:	clock structure pointer
+ */
+struct ske_keypad {
+	int irq;
+	void __iomem *reg_base;
+	struct input_dev *input;
+	const struct ske_keypad_platform_data *board;
+	unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+	struct clk *clk;
+	spinlock_t ske_keypad_lock;
+};
+
+static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
+		u8 mask, u8 data)
+{
+	u32 ret;
+
+	spin_lock(&keypad->ske_keypad_lock);
+
+	ret = readl(keypad->reg_base + addr);
+	ret &= ~mask;
+	ret |= data;
+	writel(ret, keypad->reg_base + addr);
+
+	spin_unlock(&keypad->ske_keypad_lock);
+}
+
+/*
+ * ske_keypad_chip_init: init keypad controller configuration
+ *
+ * Enable Multi key press detection, auto scan mode
+ */
+static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad)
+{
+	u32 value;
+	int timeout = 50;
+
+	/* check SKE_RIS to be 0 */
+	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
+		cpu_relax();
+
+	if (!timeout)
+		return -EINVAL;
+
+	/*
+	 * set debounce value
+	 * keypad dbounce is configured in DBCR[15:8]
+	 * dbounce value in steps of 32/32.768 ms
+	 */
+	spin_lock(&keypad->ske_keypad_lock);
+	value = readl(keypad->reg_base + SKE_DBCR);
+	value = value & 0xff;
+	value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
+	writel(value, keypad->reg_base + SKE_DBCR);
+	spin_unlock(&keypad->ske_keypad_lock);
+
+	/* enable multi key detection */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
+
+	/*
+	 * set up the number of columns
+	 * KPCN[5:3] defines no. of keypad columns to be auto scanned
+	 */
+	value = (keypad->board->kcol - 1) << 3;
+	ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
+
+	/* clear keypad interrupt for auto(and pending SW) scans */
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
+
+	/* un-mask keypad interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	/* enable automatic scan */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
+
+	return 0;
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+	struct input_dev *input = keypad->input;
+	u16 status;
+	int col = 0, row = 0, code;
+	int ske_asr, ske_ris, key_pressed, i;
+
+	/*
+	 * Read the auto scan registers
+	 *
+	 * Each SKE_ASRx (x=0 to x=3) contains two row values.
+	 * lower byte contains row value for column 2*x,
+	 * upper byte contains row value for column 2*x + 1
+	 */
+	for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
+		ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
+		if (!ske_asr)
+			continue;
+
+		/* now that ASRx is zero, find out the column x and row y*/
+		if (ske_asr & 0xff) {
+			col = i * 2;
+			status = ske_asr & 0xff;
+		} else {
+			col = (i * 2) + 1;
+			status = (ske_asr & 0xff00) >> 8;
+		}
+
+		/* find out the row */
+		row = __ffs(status);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], key_pressed);
+		input_sync(input);
+	}
+}
+
+static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
+{
+	struct ske_keypad *keypad = dev_id;
+	int retries = 20;
+
+	/* disable auto scan interrupt; mask the interrupt generated */
+	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
+
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
+		msleep(5);
+
+	if (retries) {
+		/* SKEx registers are stable and can be read */
+		ske_keypad_read_data(keypad);
+	}
+
+	/* enable auto scan interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit ske_keypad_probe(struct platform_device *pdev)
+{
+	const struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
+	struct ske_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->irq = irq;
+	keypad->board = plat;
+	keypad->input = input;
+	spin_lock_init(&keypad->ske_keypad_lock);
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->reg_base = ioremap(res->start, resource_size(res));
+	if (!keypad->reg_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err_free_mem_region;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_iounmap;
+	}
+
+	input->id.bustype = BUS_HOST;
+	input->name = "ux500-ske-keypad";
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
+			input->keycode, input->keybit);
+
+	clk_enable(keypad->clk);
+
+	/* go through board initialization helpers */
+	if (keypad->board->init)
+		keypad->board->init();
+
+	error = ske_keypad_chip_init(keypad);
+	if (error) {
+		dev_err(&pdev->dev, "unable to init keypad hardware\n");
+		goto err_clk_disable;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
+				     IRQF_ONESHOT, "ske-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+		goto err_clk_disable;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+				"unable to register input device: %d\n", error);
+		goto err_free_irq;
+	}
+
+	if (plat->wakeup_enable)
+		device_init_wakeup(&pdev->dev, true);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_clk_disable:
+	clk_disable(keypad->clk);
+	clk_put(keypad->clk);
+err_iounmap:
+	iounmap(keypad->reg_base);
+err_free_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int __devexit ske_keypad_remove(struct platform_device *pdev)
+{
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	free_irq(keypad->irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	clk_disable(keypad->clk);
+	clk_put(keypad->clk);
+
+	if (keypad->board->exit)
+		keypad->board->exit();
+
+	iounmap(keypad->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ske_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+
+	return 0;
+}
+
+static int ske_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ske_keypad_dev_pm_ops = {
+	.suspend = ske_keypad_suspend,
+	.resume = ske_keypad_resume,
+};
+#endif
+
+struct platform_driver ske_keypad_driver = {
+	.driver = {
+		.name = "nmk-ske-keypad",
+		.owner  = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &ske_keypad_dev_pm_ops,
+#endif
+	},
+	.probe = ske_keypad_probe,
+	.remove = __devexit_p(ske_keypad_remove),
+};
+
+static int __init ske_keypad_init(void)
+{
+	return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
+}
+module_init(ske_keypad_init);
+
+static void __exit ske_keypad_exit(void)
+{
+	platform_driver_unregister(&ske_keypad_driver);
+}
+module_exit(ske_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
+MODULE_ALIAS("platform:nomadik-ske-keypad");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
new file mode 100644
index 0000000..45bd097
--- /dev/null
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -0,0 +1,318 @@
+/*
+ * OMAP4 Keypad Driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: Abraham Arce <x0066660@ti.com>
+ * Initial Code: Syed Rafiuddin <rafiuddin.syed@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <plat/omap4-keypad.h>
+
+/* OMAP4 registers */
+#define OMAP4_KBD_REVISION		0x00
+#define OMAP4_KBD_SYSCONFIG		0x10
+#define OMAP4_KBD_SYSSTATUS		0x14
+#define OMAP4_KBD_IRQSTATUS		0x18
+#define OMAP4_KBD_IRQENABLE		0x1C
+#define OMAP4_KBD_WAKEUPENABLE		0x20
+#define OMAP4_KBD_PENDING		0x24
+#define OMAP4_KBD_CTRL			0x28
+#define OMAP4_KBD_DEBOUNCINGTIME	0x2C
+#define OMAP4_KBD_LONGKEYTIME		0x30
+#define OMAP4_KBD_TIMEOUT		0x34
+#define OMAP4_KBD_STATEMACHINE		0x38
+#define OMAP4_KBD_ROWINPUTS		0x3C
+#define OMAP4_KBD_COLUMNOUTPUTS		0x40
+#define OMAP4_KBD_FULLCODE31_0		0x44
+#define OMAP4_KBD_FULLCODE63_32		0x48
+
+/* OMAP4 bit definitions */
+#define OMAP4_DEF_IRQENABLE_EVENTEN	(1 << 0)
+#define OMAP4_DEF_IRQENABLE_LONGKEY	(1 << 1)
+#define OMAP4_DEF_IRQENABLE_TIMEOUTEN	(1 << 2)
+#define OMAP4_DEF_WUP_EVENT_ENA		(1 << 0)
+#define OMAP4_DEF_WUP_LONG_KEY_ENA	(1 << 1)
+#define OMAP4_DEF_CTRL_NOSOFTMODE	(1 << 1)
+#define OMAP4_DEF_CTRLPTVVALUE		(1 << 2)
+#define OMAP4_DEF_CTRLPTV		(1 << 1)
+
+/* OMAP4 values */
+#define OMAP4_VAL_IRQDISABLE		0x00
+#define OMAP4_VAL_DEBOUNCINGTIME	0x07
+#define OMAP4_VAL_FUNCTIONALCFG		0x1E
+
+#define OMAP4_MASK_IRQSTATUSDISABLE	0xFFFF
+
+struct omap4_keypad {
+	struct input_dev *input;
+
+	void __iomem *base;
+	int irq;
+
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int row_shift;
+	unsigned char key_state[8];
+	unsigned short keymap[];
+};
+
+static void __devinit omap4_keypad_config(struct omap4_keypad *keypad_data)
+{
+	__raw_writel(OMAP4_VAL_FUNCTIONALCFG,
+			keypad_data->base + OMAP4_KBD_CTRL);
+	__raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
+			keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
+	__raw_writel(OMAP4_VAL_IRQDISABLE,
+			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
+			keypad_data->base + OMAP4_KBD_IRQENABLE);
+	__raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
+			keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+}
+
+/* Interrupt handler */
+static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
+{
+	struct omap4_keypad *keypad_data = dev_id;
+	struct input_dev *input_dev = keypad_data->input;
+	unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)];
+	unsigned int col, row, code, changed;
+	u32 *new_state = (u32 *) key_state;
+
+	/* Disable interrupts */
+	__raw_writel(OMAP4_VAL_IRQDISABLE,
+		     keypad_data->base + OMAP4_KBD_IRQENABLE);
+
+	*new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
+	*(new_state + 1) = __raw_readl(keypad_data->base
+						+ OMAP4_KBD_FULLCODE63_32);
+
+	for (row = 0; row < keypad_data->rows; row++) {
+		changed = key_state[row] ^ keypad_data->key_state[row];
+		if (!changed)
+			continue;
+
+		for (col = 0; col < keypad_data->cols; col++) {
+			if (changed & (1 << col)) {
+				code = MATRIX_SCAN_CODE(row, col,
+						keypad_data->row_shift);
+				input_event(input_dev, EV_MSC, MSC_SCAN, code);
+				input_report_key(input_dev,
+						 keypad_data->keymap[code],
+						 key_state[row] & (1 << col));
+			}
+		}
+	}
+
+	input_sync(input_dev);
+
+	memcpy(keypad_data->key_state, key_state,
+		sizeof(keypad_data->key_state));
+
+	/* clear pending interrupts */
+	__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
+			keypad_data->base + OMAP4_KBD_IRQSTATUS);
+
+	/* enable interrupts */
+	__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
+			keypad_data->base + OMAP4_KBD_IRQENABLE);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit omap4_keypad_probe(struct platform_device *pdev)
+{
+	const struct omap4_keypad_platform_data *pdata;
+	struct omap4_keypad *keypad_data;
+	struct input_dev *input_dev;
+	struct resource *res;
+	resource_size_t size;
+	unsigned int row_shift, max_keys;
+	int irq;
+	int error;
+
+	/* platform data */
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no base address specified\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "no keyboard irq assigned\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	row_shift = get_count_order(pdata->cols);
+	max_keys = pdata->rows << row_shift;
+
+	keypad_data = kzalloc(sizeof(struct omap4_keypad) +
+				max_keys * sizeof(keypad_data->keymap[0]),
+			      GFP_KERNEL);
+	if (!keypad_data) {
+		dev_err(&pdev->dev, "keypad_data memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	size = resource_size(res);
+
+	res = request_mem_region(res->start, size, pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "can't request mem region\n");
+		error = -EBUSY;
+		goto err_free_keypad;
+	}
+
+	keypad_data->base = ioremap(res->start, resource_size(res));
+	if (!keypad_data->base) {
+		dev_err(&pdev->dev, "can't ioremap mem resource\n");
+		error = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	keypad_data->irq = irq;
+	keypad_data->row_shift = row_shift;
+	keypad_data->rows = pdata->rows;
+	keypad_data->cols = pdata->cols;
+
+	/* input device allocation */
+	keypad_data->input = input_dev = input_allocate_device();
+	if (!input_dev) {
+		error = -ENOMEM;
+		goto err_unmap;
+	}
+
+	input_dev->name = pdev->name;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0001;
+
+	input_dev->keycode	= keypad_data->keymap;
+	input_dev->keycodesize	= sizeof(keypad_data->keymap[0]);
+	input_dev->keycodemax	= max_keys;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_REP, input_dev->evbit);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_set_drvdata(input_dev, keypad_data);
+
+	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
+
+	omap4_keypad_config(keypad_data);
+
+	error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
+			     IRQF_TRIGGER_RISING,
+			     "omap4-keypad", keypad_data);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register interrupt\n");
+		goto err_free_input;
+	}
+
+	error = input_register_device(keypad_data->input);
+	if (error < 0) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+
+	platform_set_drvdata(pdev, keypad_data);
+	return 0;
+
+err_free_irq:
+	free_irq(keypad_data->irq, keypad_data);
+err_free_input:
+	input_free_device(input_dev);
+err_unmap:
+	iounmap(keypad_data->base);
+err_release_mem:
+	release_mem_region(res->start, size);
+err_free_keypad:
+	kfree(keypad_data);
+	return error;
+}
+
+static int __devexit omap4_keypad_remove(struct platform_device *pdev)
+{
+	struct omap4_keypad *keypad_data = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(keypad_data->irq, keypad_data);
+	input_unregister_device(keypad_data->input);
+
+	iounmap(keypad_data->base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(keypad_data);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver omap4_keypad_driver = {
+	.probe		= omap4_keypad_probe,
+	.remove		= __devexit_p(omap4_keypad_remove),
+	.driver		= {
+		.name	= "omap4-keypad",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init omap4_keypad_init(void)
+{
+	return platform_driver_register(&omap4_keypad_driver);
+}
+module_init(omap4_keypad_init);
+
+static void __exit omap4_keypad_exit(void)
+{
+	platform_driver_unregister(&omap4_keypad_driver);
+}
+module_exit(omap4_keypad_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("OMAP4 Keypad Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap4-keypad");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index fb16b5e..09bef79 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -406,23 +406,22 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 	if (error) {
 		dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
 			kp->irq);
-		goto err3;
+		goto err2;
 	}
 
 	/* Enable KP and TO interrupts now. */
 	reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
 	if (twl4030_kpwrite_u8(kp, reg, KEYP_IMR1)) {
 		error = -EIO;
-		goto err4;
+		goto err3;
 	}
 
 	platform_set_drvdata(pdev, kp);
 	return 0;
 
-err4:
+err3:
 	/* mask all events - we don't care about the result */
 	(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
-err3:
 	free_irq(kp->irq, NULL);
 err2:
 	input_unregister_device(input);