Merge commit 'v2.6.38-rc3' into devicetree/next

7 files changed, 89 insertions, 121 deletions

diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index bac7d62..0371bf5 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -462,7 +462,7 @@ static int __devinit sdh_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	mmc = mmc_alloc_host(sizeof(*mmc), &pdev->dev);
+	mmc = mmc_alloc_host(sizeof(struct sdh_host), &pdev->dev);
 	if (!mmc) {
 		ret = -ENOMEM;
 		goto out;
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index b3a0ab0..74218ad 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/mmc/host.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -827,8 +828,8 @@ static int __devinit jz4740_mmc_probe(struct platform_device* pdev)
 	}
 
 	host->clk = clk_get(&pdev->dev, "mmc");
-	if (!host->clk) {
-		ret = -ENOENT;
+	if (IS_ERR(host->clk)) {
+		ret = PTR_ERR(host->clk);
 		dev_err(&pdev->dev, "Failed to get mmc clock\n");
 		goto err_free_host;
 	}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 5630228..2d6de3e 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -14,6 +14,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/highmem.h>
@@ -46,10 +47,6 @@ static unsigned int fmax = 515633;
  *	      is asserted (likewise for RX)
  * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
  *		  is asserted (likewise for RX)
- * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware
- *		and will not work at all.
- * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when
- *		using DMA.
  * @sdio: variant supports SDIO
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
  */
@@ -59,8 +56,6 @@ struct variant_data {
 	unsigned int		datalength_bits;
 	unsigned int		fifosize;
 	unsigned int		fifohalfsize;
-	bool			broken_blockend;
-	bool			broken_blockend_dma;
 	bool			sdio;
 	bool			st_clkdiv;
 };
@@ -76,7 +71,6 @@ static struct variant_data variant_u300 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg_enable		= 1 << 13, /* HWFCEN */
 	.datalength_bits	= 16,
-	.broken_blockend_dma	= true,
 	.sdio			= true,
 };
 
@@ -86,7 +80,6 @@ static struct variant_data variant_ux500 = {
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= 1 << 14, /* HWFCEN */
 	.datalength_bits	= 24,
-	.broken_blockend	= true,
 	.sdio			= true,
 	.st_clkdiv		= true,
 };
@@ -210,8 +203,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	host->data = data;
 	host->size = data->blksz * data->blocks;
 	host->data_xfered = 0;
-	host->blockend = false;
-	host->dataend = false;
 
 	mmci_init_sg(host, data);
 
@@ -288,21 +279,26 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
-	struct variant_data *variant = host->variant;
-
 	/* First check for errors */
 	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+		u32 remain, success;
+
+		/* Calculate how far we are into the transfer */
+		remain = readl(host->base + MMCIDATACNT);
+		success = data->blksz * data->blocks - remain;
+
 		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
-		if (status & MCI_DATACRCFAIL)
+		if (status & MCI_DATACRCFAIL) {
+			/* Last block was not successful */
+			host->data_xfered = round_down(success - 1, data->blksz);
 			data->error = -EILSEQ;
-		else if (status & MCI_DATATIMEOUT)
+		} else if (status & MCI_DATATIMEOUT) {
+			host->data_xfered = round_down(success, data->blksz);
 			data->error = -ETIMEDOUT;
-		else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
+		} else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
+			host->data_xfered = round_down(success, data->blksz);
 			data->error = -EIO;
-
-		/* Force-complete the transaction */
-		host->blockend = true;
-		host->dataend = true;
+		}
 
 		/*
 		 * We hit an error condition.  Ensure that any data
@@ -321,61 +317,14 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 		}
 	}
 
-	/*
-	 * On ARM variants in PIO mode, MCI_DATABLOCKEND
-	 * is always sent first, and we increase the
-	 * transfered number of bytes for that IRQ. Then
-	 * MCI_DATAEND follows and we conclude the transaction.
-	 *
-	 * On the Ux500 single-IRQ variant MCI_DATABLOCKEND
-	 * doesn't seem to immediately clear from the status,
-	 * so we can't use it keep count when only one irq is
-	 * used because the irq will hit for other reasons, and
-	 * then the flag is still up. So we use the MCI_DATAEND
-	 * IRQ at the end of the entire transfer because
-	 * MCI_DATABLOCKEND is broken.
-	 *
-	 * In the U300, the IRQs can arrive out-of-order,
-	 * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND,
-	 * so for this case we use the flags "blockend" and
-	 * "dataend" to make sure both IRQs have arrived before
-	 * concluding the transaction. (This does not apply
-	 * to the Ux500 which doesn't fire MCI_DATABLOCKEND
-	 * at all.) In DMA mode it suffers from the same problem
-	 * as the Ux500.
-	 */
-	if (status & MCI_DATABLOCKEND) {
-		/*
-		 * Just being a little over-cautious, we do not
-		 * use this progressive update if the hardware blockend
-		 * flag is unreliable: since it can stay high between
-		 * IRQs it will corrupt the transfer counter.
-		 */
-		if (!variant->broken_blockend)
-			host->data_xfered += data->blksz;
-		host->blockend = true;
-	}
-
-	if (status & MCI_DATAEND)
-		host->dataend = true;
+	if (status & MCI_DATABLOCKEND)
+		dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n");
 
-	/*
-	 * On variants with broken blockend we shall only wait for dataend,
-	 * on others we must sync with the blockend signal since they can
-	 * appear out-of-order.
-	 */
-	if (host->dataend && (host->blockend || variant->broken_blockend)) {
+	if (status & MCI_DATAEND || data->error) {
 		mmci_stop_data(host);
 
-		/* Reset these flags */
-		host->blockend = false;
-		host->dataend = false;
-
-		/*
-		 * Variants with broken blockend flags need to handle the
-		 * end of the entire transfer here.
-		 */
-		if (variant->broken_blockend && !data->error)
+		if (!data->error)
+			/* The error clause is handled above, success! */
 			host->data_xfered += data->blksz * data->blocks;
 
 		if (!data->stop) {
@@ -394,15 +343,15 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 
 	host->cmd = NULL;
 
-	cmd->resp[0] = readl(base + MMCIRESPONSE0);
-	cmd->resp[1] = readl(base + MMCIRESPONSE1);
-	cmd->resp[2] = readl(base + MMCIRESPONSE2);
-	cmd->resp[3] = readl(base + MMCIRESPONSE3);
-
 	if (status & MCI_CMDTIMEOUT) {
 		cmd->error = -ETIMEDOUT;
 	} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
 		cmd->error = -EILSEQ;
+	} else {
+		cmd->resp[0] = readl(base + MMCIRESPONSE0);
+		cmd->resp[1] = readl(base + MMCIRESPONSE1);
+		cmd->resp[2] = readl(base + MMCIRESPONSE2);
+		cmd->resp[3] = readl(base + MMCIRESPONSE3);
 	}
 
 	if (!cmd->data || cmd->error) {
@@ -770,7 +719,6 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
-	unsigned int mask;
 	int ret;
 
 	/* must have platform data */
@@ -951,12 +899,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 			goto irq0_free;
 	}
 
-	mask = MCI_IRQENABLE;
-	/* Don't use the datablockend flag if it's broken */
-	if (variant->broken_blockend)
-		mask &= ~MCI_DATABLOCKEND;
-
-	writel(mask, host->base + MMCIMASK0);
+	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index df06f01..c1df7b8 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -137,7 +137,7 @@
 #define MCI_IRQENABLE	\
 	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
 	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
-	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK)
+	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK)
 
 /* These interrupts are directed to IRQ1 when two IRQ lines are available */
 #define MCI_IRQ1MASK \
@@ -177,9 +177,6 @@ struct mmci_host {
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
-	bool			blockend;
-	bool			dataend;
-
 	/* pio stuff */
 	struct sg_mapping_iter	sg_miter;
 	unsigned int		size;
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 5decfd0..153ab97 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -383,14 +383,30 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data)
 	host->curr.user_pages = 0;
 
 	box = &nc->cmd[0];
-	for (i = 0; i < host->dma.num_ents; i++) {
-		box->cmd = CMD_MODE_BOX;
 
-	/* Initialize sg dma address */
-	sg->dma_address = page_to_dma(mmc_dev(host->mmc), sg_page(sg))
-				+ sg->offset;
+	/* location of command block must be 64 bit aligned */
+	BUG_ON(host->dma.cmd_busaddr & 0x07);
 
-	if (i == (host->dma.num_ents - 1))
+	nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP;
+	host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST |
+			       DMOV_CMD_ADDR(host->dma.cmdptr_busaddr);
+	host->dma.hdr.complete_func = msmsdcc_dma_complete_func;
+
+	n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
+			host->dma.num_ents, host->dma.dir);
+	if (n == 0) {
+		printk(KERN_ERR "%s: Unable to map in all sg elements\n",
+			mmc_hostname(host->mmc));
+		host->dma.sg = NULL;
+		host->dma.num_ents = 0;
+		return -ENOMEM;
+	}
+
+	for_each_sg(host->dma.sg, sg, n, i) {
+
+		box->cmd = CMD_MODE_BOX;
+
+		if (i == n - 1)
 			box->cmd |= CMD_LC;
 		rows = (sg_dma_len(sg) % MCI_FIFOSIZE) ?
 			(sg_dma_len(sg) / MCI_FIFOSIZE) + 1 :
@@ -418,27 +434,6 @@ static int msmsdcc_config_dma(struct msmsdcc_host *host, struct mmc_data *data)
 			box->cmd |= CMD_DST_CRCI(crci);
 		}
 		box++;
-		sg++;
-	}
-
-	/* location of command block must be 64 bit aligned */
-	BUG_ON(host->dma.cmd_busaddr & 0x07);
-
-	nc->cmdptr = (host->dma.cmd_busaddr >> 3) | CMD_PTR_LP;
-	host->dma.hdr.cmdptr = DMOV_CMD_PTR_LIST |
-			       DMOV_CMD_ADDR(host->dma.cmdptr_busaddr);
-	host->dma.hdr.complete_func = msmsdcc_dma_complete_func;
-
-	n = dma_map_sg(mmc_dev(host->mmc), host->dma.sg,
-			host->dma.num_ents, host->dma.dir);
-/* dsb inside dma_map_sg will write nc out to mem as well */
-
-	if (n != host->dma.num_ents) {
-		printk(KERN_ERR "%s: Unable to map in all sg elements\n",
-			mmc_hostname(host->mmc));
-		host->dma.sg = NULL;
-		host->dma.num_ents = 0;
-		return -ENOMEM;
 	}
 
 	return 0;
@@ -1331,9 +1326,6 @@ msmsdcc_probe(struct platform_device *pdev)
 	if (host->timer.function)
 		pr_info("%s: Polling status mode enabled\n", mmc_hostname(mmc));
 
-#if BUSCLK_PWRSAVE
-	msmsdcc_disable_clocks(host, 1);
-#endif
 	return 0;
  cmd_irq_free:
 	free_irq(cmd_irqres->start, host);
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 1720358..5309ab9 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -277,10 +277,43 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 	host->clock = clock;
 }
 
+/**
+ * sdhci_s3c_platform_8bit_width - support 8bit buswidth
+ * @host: The SDHCI host being queried
+ * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
+ *
+ * We have 8-bit width support but is not a v3 controller.
+ * So we add platform_8bit_width() and support 8bit width.
+ */
+static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
+{
+	u8 ctrl;
+
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+
+	switch (width) {
+	case MMC_BUS_WIDTH_8:
+		ctrl |= SDHCI_CTRL_8BITBUS;
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		break;
+	case MMC_BUS_WIDTH_4:
+		ctrl |= SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
+		break;
+	default:
+		break;
+	}
+
+	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+
+	return 0;
+}
+
 static struct sdhci_ops sdhci_s3c_ops = {
 	.get_max_clock		= sdhci_s3c_get_max_clk,
 	.set_clock		= sdhci_s3c_set_clock,
 	.get_min_clock		= sdhci_s3c_get_min_clock,
+	.platform_8bit_width	= sdhci_s3c_platform_8bit_width,
 };
 
 static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
@@ -473,6 +506,9 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
 
+	if (pdata->host_caps)
+		host->mmc->caps |= pdata->host_caps;
+
 	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
 			 SDHCI_QUIRK_32BIT_DMA_SIZE);
 
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index f8f65df..f08f944 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 #include <linux/kernel.h>
-#include <linux/usb.h>
 #include <linux/slab.h>
 #include <linux/dma-mapping.h>
 #include <linux/mmc/host.h>